A series of reactive-transport models of Enhanced Geothermal Systems (EGS) were constructed using the reactive transport code PFLOTRAN to examine the effect of matrix thermal contraction and mineral dissolution/precipitation on fracture flow in the context of grid cell size and model complexity. It was found that for thermal drawdown at production well, the impact of fracture zone grid cell size is negligible.
The synthesis of Lanthanum Cobalt Oxide (LCO) via Sol-Gel method provides a potentially low-cost method of production for a P-type photocatalytic. LCO was prepped from Lanthanum and Nitrate Precursors in Aqueous solution. After a significant amount of water is evaporated, the solution is deposited onto SiO2 substrate via spin-deposition method. After annealing, the samples produce thin film LCO that display thickness of sub-500 nanometers. The samples material profile is confirmed by both Raman spectroscopy and X-Ray Diffraction spectroscopy (XRD). Additionally, two-point probing tested the conductivity of the samples. The thin film samples display characteristics of a P-type photocatalytic and may potentially be used in the formation of a P-N junction for user in water-splitting applications.
This report summarizes the research and capabilities developed as part of the project “Analysis and Validation of Critical Infrastructure Models using Model Order Reduction” (CI-MOR) LDRD project. CI-MOR research enables the solution of large, complex optimization models that naturally arise in national security challenges involving critical infrastructures. Specifically, CI-MOR researchers developed methods to (1) rigorously approximate complex, nonlinear optimization formulations, (2) identify alternative near-optimal solutions, (3) accelerate optimization workflows used for complex applications, and (4) rigorously integrate domain knowledge in stochastic-process models. This report provides an overview of the research done in CI-MOR, and we describe application exemplars used to illustrate CI-MOR capabilities. Furthermore, we describe the software developed by CI-MOR that researchers can leverage to analyze new applications.
Cheng, Zheyuan; Pagano, John; Udren, Eric A.; Holbach, Juergen; Khani, Hadi; Reno, Matthew J.
This report describes an approach to utilizing phasor measurement unit (PMU) data from multiple Intelligent Electronics Devices (IEDs) in a low-voltage network to produce a differential scheme for protecting the medium-voltage feeder and low-voltage network transformers. The proposed protection scheme is designed and prototyped on a real-time automation controller. Its performance is evaluated using real-time controller hardware-in-the-loop simulation. Lab testing results indicate that the proposed protection scheme allows significant distributed energy resources (DER) backfeed and enables selective and fast protection of medium voltage feeders.
A novel algorithm for explicit temporal discretization of the variable-density, low-Mach Navier-Stokes equations is presented here. Recognizing there is a redundancy between the mass conservation equation, the equation of state, and the transport equation(s) for the scalar(s) which characterize the thermochemical state, and that it destabilizes explicit methods, we demonstrate how to analytically eliminate the redundancy and propose an iterative scheme to solve the resulting transformed scalar equations. The method obtains second-order accuracy in time regardless of the number of iterations, so one can terminate this subproblem once stability is achieved. Hence, flows with larger density ratios can be simulated while still retaining the efficiency, low cost, and parallelizability of an explicit scheme. The temporal discretization algorithm is used within a pseudospectral direct numerical simulation which extends the method of Kim, Moin, and Moser for incompressible flow [17] to the variable-density, low-Mach setting, where we demonstrate stability for density ratios up to ∼25.7.
Rapid, time-varying, three-dimensional physics underpin numerous engineering challenges. Often, these physics occur within opaque environments, internal to a component, severely limiting applicable diagnostics. Development of novel diagnostics is necessary to understand and predict transient three-dimensional (3D) phenomena within opaque environments. This report highlights progress in four key areas leading to advancements in high-speed X-ray radiography and tomography. The first area is enabling MHz-rate imaging of energetics at the Advanced Photon Source at Argonne National Laboratory. The second is modeling a high-flux, rotating-anode X-ray source to understand the heat loads on the anode. The third effort was to develop a novel reconstruction algorithm that is validated by ground experimental tomography data and synthetic tomography data. The fourth is the development of a novel approach to two-color X-ray imaging.
A series of reactive-transport models of Enhanced Geothermal Systems (EGS) were constructed using the reactive transport code PFLOTRAN to examine the effect of matrix thermal contraction and mineral dissolution/precipitation on fracture flow in the context of grid cell size and model complexity. It was found that for thermal drawdown at production well, the impact of fracture zone grid cell size is negligible.
Although there are increasing numbers of distributed energy resources (DERs) and microgrids being deployed, current IEEE and utility standards generally strictly limit their interconnection inside secondary networks. Secondary networks are low-voltage meshed (non-radial) distribution systems that create redundancy in the path from the main grid source to each load. This redundancy provides a high level of immunity to disruptions in the distribution system, and thus extremely high reliability of electric power service. There are two main types of secondary networks, called grid and spot secondary networks, both of which are used worldwide. In the future, primary networks in distribution systems that might include looped or meshed distribution systems at the primary-voltage (medium-voltage) level may also become common as a means for improving distribution reliability and resilience.
Accident analysis and ensuring power plant safety are pivotal in the nuclear energy sector. Significant strides have been achieved over the past few decades regarding fire protection and safety, primarily centered on design and regulatory compliance. Yet, after the Fukushima accident a decade ago, the imperative to enhance measures against fire, internal flooding, and power loss has intensified. Hence, a comprehensive, multilayered protection strategy against severe accidents is needed. Consequently, gaining a deeper insight into pool fires and their behavior through extensive validated data can greatly aid in improving these measures using advanced validation techniques. A model validation study was performed at Sandia National Laboratories (SNL) in which a 30-cm diameter methanol pool fire was modeled using the SIERRA/Fuego turbulent reacting flow code. This validation study used a standard validation experiment to compare model results against, and conclusions have been published. The fire was modeled with a large eddy simulation (LES) turbulence model with subgrid turbulent kinetic energy closure. Combustion was modeled using a strained laminar flamelet library approach. Radiative heat transfer was accounted for with a model utilizing the gray-gas approximation. In this study, additional validation analysis is performed using the area validation metric (AVM). These activities are done on multiple datasets involving different variables and temporal/spatial ranges and intervals. The results provide insight into the use of the area validation metric on such temporally varying datasets and the importance of physics-aware use of the metric for proper analysis.
The SpotterRF CK5 is a low-power draw doppler radar, approximately the size of a book (7” x 9”, see Figure 1). It is intended to provide coverage over short ranges (125 m). The SpotterRF CK5B radar was tested in a two-fence perimeter environment and followed the vendor-recommended configuration (Figure 2), with the exception of rotating the radar 90 degrees about the horizontal axis. The radar is advertised to take approximately 10 minutes to set up.
This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: • Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. • A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models. • Device models that are specifically tailored to meet Sandia’s needs, including some radiation-aware devices (for Sandia users only). • Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase — a message passing parallel implementation — which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows.
Rattlesnake is a combined-environments, multiple input/multiple output control system for dynamic excitation of structures under test. It provides capabilities to control multiple responses on the part using multiple exciters using various control strategies. Rattlesnake is written in the Python programming language to facilitate multiple input/multiple output vibration research by allowing users to prescribe custom control laws to the controller. Rattlesnake can target multiple hardware devices, or even perform synthetic control to simulate a test virtually. Rattlesnake has been used to execute control problems with up to 200 response channels and 24 shaker drives. This document describes the functionality, architecture, and usage of the Rattlesnake controller to perform combined environments testing.
We build upon recent work on the use of machine-learning models to estimate Hamiltonian parameters using continuous weak measurement of qubits as input. We consider two settings for the training of our model: (1) supervised learning, where the weak-measurement training record can be labeled with known Hamiltonian parameters, and (2) unsupervised learning, where no labels are available. The first has the advantage of not requiring an explicit representation of the quantum state, thus potentially scaling very favorably to a larger number of qubits. The second requires the implementation of a physical model to map the Hamiltonian parameters to a measurement record, which we implement using an integrator of the physical model with a recurrent neural network to provide a model-free correction at every time step to account for small effects not captured by the physical model. We test our construction on a system of two qubits and demonstrate accurate prediction of multiple physical parameters in both the supervised context and the unsupervised context. We demonstrate that the model benefits from larger training sets, establishing that it is "learning,"and we show robustness regarding errors in the assumed physical model by achieving accurate parameter estimation in the presence of unanticipated single-particle relaxation.
Although there are increasing numbers of distributed energy resources (DERs) and microgrids being deployed, current IEEE and utility standards generally strictly limit their interconnection inside secondary networks. Secondary networks are low-voltage meshed (non-radial) distribution systems that create redundancy in the path from the main grid source to each load. This redundancy provides a high level of immunity to disruptions in the distribution system, and thus extremely high reliability of electric power service. There are two main types of secondary networks, called grid and spot secondary networks, both of which are used worldwide. In the future, primary networks in distribution systems that might include looped or meshed distribution systems at the primary-voltage (medium-voltage) level may also become common as a means for improving distribution reliability and resilience.
Melanized species of filamentous fungi isolated from high radiation environments have been reported to exhibit radiotropism, defined as the directed growth toward a source of ionizing radiation. Inconsistencies in the experimental approaches and results have impeded our understanding of the key factors involved in radiotropism. In the present study, we assessed radiotropism in four isolates of fungi: Aspergillus niger, A. calidoustus JC-1043, Paecilomyces variotii SNL-1, and P. variotii IMV-00236. Of these fungi, only P. variotii IMV-00236 had been previously reported to exhibit radiotropic behavior. Plates of each fungus were placed in equivalent proximity to a 137Cs source, with a primary gamma emission of 662 keV, and differences in the rate and direction of mycelia growth were measured over a seven-day period. Significant differences were not observed in the rate or direction of growth of the different fungi based on exposure to gamma radiation, which suggested a lack of measurable radiotropism in these experiments. Additional studies varying parameters such gamma emission rates and energies, as well as other types of ionizing radiation (e.g., alpha and beta particles, neutrons) are necessary to gain further insights to the factors critical to the expression of radiotropic behavior in filamentous fungi.
Koper, Keith D.; Burlacu, Relu; Murray, Riley; Baker, Ben; Tibi, Rigobert; Mueen, Abdullah
Determining the depths of small crustal earthquakes is challenging in many regions of the world, because most seismic networks are too sparse to resolve trade-offs between depth and origin time with conventional arrival-time methods. Precise and accurate depth estimation is important, because it can help seismologists discriminate between earthquakes and explosions, which is relevant to monitoring nuclear test ban treaties and producing earthquake catalogs that are uncontaminated by mining blasts. Here, we examine the depth sensitivity of several physics-based waveform features for ∼8000 earthquakes in southern California that have well-resolved depths from arrival-time inversion. We focus on small earthquakes (2 < ML < 4) recorded at local distances (< 150 km), for which depth estimation is especially challenging. We find that differential magnitudes (Mw= ML–Mc) are positively correlated with focal depth, implying that coda wave excitation decreases with focal depth. We analyze a simple proxy for relative frequency content, Φ≡ log10 (M0)+3log10 (fc (,and find that source spectra are preferentially enriched in high frequencies, or “blue-shifted,” as focal depth increases. We also find that two spectral amplitude ratios Rg 0.5–2 Hz/Sg 0.5–8 Hz and Pg/Sg at 3–8 Hz decrease as focal depth increases. Using multilinear regression with these features as predictor variables, we develop models that can explain 11%–59% of the variance in depths within 10 subregions and 25% of the depth variance across southern California as a whole. We suggest that incorporating these features into a machine learning workflow could help resolve focal depths in regions that are poorly instrumented and lack large databases of well-located events. Some of the waveform features we evaluate in this study have previously been used as source discriminants, and our results imply that their effectiveness in discrimination is partially because explosions generally occur at shallower depths than earthquakes.
Future bulk power systems are expected to operate with a high penetration of inverter-based resources (IBR). This is anticipated to fundamentally change the system’s short-circuit behaviors and demand a change in existing transmission line protection settings or schemes. Phasor-domain short circuit programs (e.g., ASPEN, CAPE, and CYME) remain the mainstream tools for developing protection settings. However, the system protection community has shared concerns about the accuracy of IBR models in short-circuit programs. This report compares the performance of existing generic IBR models in short-circuit programs with detailed electro-magnetic transient (EMT) models provided by several different IBR manufacturers in PSCAD, to quantify the short-circuit program’s IBR model accuracy, assess their ability to replicate individual IBR controls such as negative sequence current injections, and identify specific gaps in the existing generic phasor-domain IBR models that are currently available.
Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Fjeldsted, Aaron P.; Morrow, Tyler; Scott, Clayton; Zhu, Yilun; Holland, Darren E.; Hanks, Ephraim M.; Wolfe, Douglas E.
The adoption of machine learning approaches for gamma-ray spectroscopy has received considerable attention in the literature. Many studies have investigated the deployment of various algorithm architectures to a specific task. However, little attention has been afforded to the development of the datasets leveraged to train the models. Such training datasets typically span a set of environmental or detector parameters to encompass a problem space of interest to a user. Variations in these measurement parameters will also induce fluctuations in the detector response, including expected pile-up and ground scatter effects. Fundamental to this work is the understanding that 1) the underlying spectral shape varies as the measurement parameters change and 2) the statistical uncertainties associated with two spectra impact their level of similarity. While previous studies attribute some arbitrary discretization to the measurement parameters for the generation of their synthetic training data, this work introduces a principled methodology for efficient spectral-based discretization of a problem space. A signal-to-noise ratio (SNR) respective spectral comparison measure and a Gaussian Process Regression (GPR) model are used to predict the spectral similarity across a range of measurement parameters. This innovative approach effectively showcased its capability by dividing a problem space, ranging from 5 cm to 100 cm standoff distances and 5 μCi–100 μCi of 137Cs, into three unique combinations of measurement parameters. The findings from this work will aid in creating more robust datasets, which incorporate many possible measurement scenarios, reduce the number of required experimental test set measurements, and possibly enable experimental training data collection for gamma-ray spectroscopy.
Development of a radioimaging diagnostic for high-voltage component reliability testing and electrical breakdown computational model validation is described. Radioimaging has its roots in radio astronomy, where aperture synthesis (also known as synthesis imaging) has been utilized for decades to image radio sources far from Earth. Radioimaging as described herein, in contrast, seeks to image radio sources in close proximity to its receivers (i.e., in a laboratory environment). Here it is shown that corona discharge, a non-destructive precursor to catastrophic (thermal) arc discharge, electromagnetically radiates strongly within a 250 kHz – 2.5 GHz bandwidth, and is readily detected and located by postprocessing the received radio signals. The ability of radioimaging to detect both corona and arc discharge (grouped together herein as high voltage breakdown or HVB) makes it a valuable tool for 100% HVB detection in materials, components, and devices, and has the ability to indicate electrical weakness (via corona detection) prior to a destructive arc discharge event. Radioimaging enables HVB to be located both internal and external to dielectric components under test in near-real-time, with multiple and/or extended HVB events located simultaneously. In contrast, existing non-destructive diagnostics (at the time of this writing) either indicate electrical breakdown without resolving failure locations (e.g., current, voltage, and chemical measurements), locate external HVB (e.g., high-speed optical and ultraviolet (UV) measurements or photography), or locate both external and internal HVB but with low fidelity (e.g., a single HVB source can be located by existing time-of-arrival (TOA) UHF or acoustic emissions). Radioimaging instead creates a sequence of high-fidelity images similar to an optical high-speed camera but at radiofrequencies (RF), and is not limited to two-dimensions. Moreover, radioimaging has already served one internal and two external industry customers, the results of which are detailed in this report. The radioimaging results described herein were part of a three-year effort funded by the Sandia Lab Directed Research and Development (LDRD) program within the Radiation, Electromagnetic, High Energy Density Science (REHEDS) investment area.
In this project we considered the initial stages of helium bubble nucleation via the proposed mechanism of self-interstitial atom nucleation. By calculating the energy barrier to self-interstitial atom nucleation in a range of Fe-Ni-Cr alloys we identified the most important energetic contributions to the phenomenon: the Frenkel-pair energy barrier in the absence of helium and the difference of insertion energy for a He cluster into a perfect lattice and vacancy. From this observation, we developed a simple model of helium-assisted self-interstitial atom nucleation.
A method for estimating covariance matrices which capture the uncertainties in calculated reactor spectra has been developed. This method is based on perturbing the parameters of a physics-based analytic model fitted to a calculated spectrum. The covariance of the perturbed analytic spectra imposes energy-dependent correlations due to the physics of the neutron processes in the reactor, i.e., a fission component, a 1/E down-scatting component, and a thermal Maxwellian component. An analytic model is developed which is shown to produce good fits to several reactor environments. The covariance matrices produced via this method are then used as the prior spectrum in STAYSL least squares spectrum adjustment where it is combined with integral metrics, such as activation measurements, to produce a high-fidelity neutron spectrum characterization. It was concluded that the methodology showed agreeable results for the ACRR free-field spectrum adjustment in STAYSL resulting in a 𝜒2 value of 2.21 (per degree of freedom), but further work is needed to describe scattering and interface regions.
This core capability project’s objective is to increase the value of photovoltaic (PV) performance models by improving their functionality, demonstrating, and quantifying their validity, and offering a wide range of stakeholder engagement opportunities. In FY22-24, we developed new and improved modeling algorithms and functions to represent PV performance more accurately in a variety of environments and conditions. The “Model parameter toolkit” was developed and includes functions to translate between different module temperature models, incidence angle modifier models, and single-diode models. A new modeling capability named “PV Atlas” was also developed leveraging Sandia’s High Performance Computing resources. This capability allows us to investigate several questions and provide climate-specific best practices and geographic data files; all these are hosted on an interactive website on Sandia’s GitHub and can be used for training, system optimization, or to provide best practices for uncertainty reduction. For model validation, we published high-quality PV performance, and weather data; these data are well documented, filtered, and processed for quality and include examples on how to run PV simulations. We also developed well documented, standardized methods for validating PV models and ran independent model validation and 2 blind modeling intercomparisons engaging with 49 organizations from 17 countries. We co-led and contributed to a growing, well documented and maintained suite of open-source functions for PV modeling (i.e., the pvlib-python) and we outreached to the PV modeling stakeholders via the PVPMC workshops and web resources. In addition, this project supported US representation and leadership for the International Energy Agency (IEA) PVPS Task 13; specifically, members of our team led and supported 3 subtasks on: 1) Best practices for the optimization of bifacial photovoltaic tracking, 2) Extreme weather events and their multiple impact on PV power plants: Risks, failure mechanisms and mitigation strategies, and 3) Best practice guidelines for the use of economic and technical Key Performance Indicators (KPIs). This project resulted in the publications of 14 peer reviewed journal papers, 37 conference presentations, 6 SAND reports, 5 public datasets and 6 new webpages on the PVPMC website. It supported the release of 13 pvlib-python versions where 28 enhancements were from this PV Performance Modeling project. We co-organized 5 PVPMC workshops in FY22-24 with the participation of 214 unique institutions and around 700 participants. The PVPMC website was redesigned, and its reliability was improved; it receives over 50,000 visitors/year from 202 unique countries.
Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high-fidelity, validated models used in modal, vibration, static and shock analysis of weapons systems. This document provides a user’s guide to the input for Sierra/SD. Details of input specifications for the different solution types, output options, element types and parameters are included. The appendices contain detailed examples, and instructions for running the software on parallel platforms.
Verification and validation (V&V) of scientific computing programs are important at Sandia National Labs due to the expanding role of computational simulation in managing the United States nuclear stockpile. The complexities of structural response calculations used to analyze physical problems, the varieties of codes applied to the calculations, and the importance of accurate predictions when assessing field conditions demand confidence in the consistency and accuracy of computer codes. Confidence in the accuracy of the predictions arising from computer simulations must ultimately be gained through verification and validation. The Sierra salinas structural dynamics analysis code, Sierra/SD, is used at the DOE Laboratories, and in several DOD projects. The roles of Sierra/SD in the qualification of weapon systems and components for normal and hostile environments throughout the Stockpile-to-Target Sequence include to, • Redesign weapon components. • Certify weapon components and systems for target environments such as hypersonic vehicles. • Certify that components will survive the thermal mechanical shock loads associated with hostile environments. • Evaluate current stockpile issues, including issues associated with uncertainty quantification. • Address many other problems that are encountered in stockpile management. The Sierra/SD verification plan is described, and an evolving set of key verification tests are described in detail. The verification tests ensure the correctness of the mathematics and numerical algorithms associated with functionality describing engineering phenomena. Development is in accordance with a set of tailored Software Quality Engineering (SQE) practices. SQE practices guide the overall verification and validation effort.
In this study, we demonstrate that a multiblock lithium-ion-conducting polymer can be swollen with ethylene carbonate solvent to increase the conductivity relative to the dry polymer material by nearly 4 orders of magnitude. This increase is due to the partial solvation of lithium ions by ethylene carbonate, which leads to Li+ diffusion along the solvent–polymer interface. This differs from the vehicular transport mechanism for lithium ions in pure solvent. We use a combination of broadband dielectric spectroscopy, X-ray scattering, and all-atom molecular dynamics simulations to probe the effect of the solvent on the polymer morphology and to elucidate the mechanism of lithium ion transport.
Here, we used a combined molecular dynamics/active learning (AL) approach to create machine learning models that can predict the diffusion coefficient of epichlorohydrin and chloropropene carbonate, the reactant and product of a common CO2 cycloaddition reaction, in metal-organic frameworks (MOFs). Nanoporous MOFs are effective catalysts for the cycloaddition of CO2 to epoxides. The diffusion rates within nanoporous catalysts can control the rate of reaction as the reactants and products must diffuse to the active sites within the MOF and then out of the nanoporous material for reusability. However, the diffusion process is routinely ignored when searching for new materials in catalytic applications. We verified improvement during the AL process by consistently tracking metrics on the same groups of MOFs to ensure consistency. Metal identity was found to have little impact on diffusion rates, while structural features like pore limiting diameter act as a threshold where a minimum value is needed for high diffusion rates. We identified the MOFs with the highest epichlorohydrin and chloropropene carbonate diffusion coefficients which can be used for further studies of reaction energetics.
The objective of this project is to validate low-fidelity models of 304L to 304L stainless steel partial-penetration laser welds for thin sheets. Low-fidelity means that the weld is represented by coarsely meshed element blocks. Here, the hexahedral element size is approx imately half the weld penetration depth. The material behavior of the block is represented by a J2 plasticity model with a Voce hardening function. The source of the data used in this work is an extensive experimental study conducted by Sharlotte Kramer (1528) and published in 2015. Figure 1 shows a cross-section of the weld of interest. The nominal thickness of the sheets is 0.063 in. while the target penetration depth of the weld is in the range of 0.028 to 0.032 in., extending about half the sheet thickness. Uniaxial tension tests provided data for calibration of base material and weld models. Results of two validation geometries were also provided. The principal validation geometry is shown in Fig. 2. It consists of a plate specimen with in-plane dimensions 6 in × 2.875 in loaded in tension. A circular plug with a 1.5 in. diameter was cut from the center of the plate and then welded in place. The details of the welding schedule are given. An important assumption is that the welds in the calibration and validation specimens have similar geometric and material properties as those in the validation tests. The task was to first calibrate models for the base material and the welds and then simulate the validation tests until the point of weld first failure.
Material extrusion is an additive manufacturing technique that enables the creation of reproducible and complex hardware by depositing a viscous, shear-thinning ink onto a substrate in a custom-pattern via extrusion through a syringe. The ability of an ink to be extruded onto a substrate in many layers, and maintain the desired shape is what defines the printability. Printability is often investigated by formulating, printing, and postmortem analysis of final parts in an iterative manner. Investigations of printability through rheological characterization have often been concerned with inks that straddle the line between printable and too thin, leaving out an entire class of inks that are highly-filled pastes, where extrudability is the limiting factor. Highly-filled pastes continue to pose issues for researchers as the effect of filler morphology, size, loading, and packing fraction on the ink rheology and corresponding printability is not understood. While traditional rheological characterizations may be useful for some inks, we show that protocols utilizing steady-shear, or large-amplitude oscillatory shear are difficult and unreliable for highly-filled pastes. Through transient rheology paired with real-time images we show that each traditional protocol produces inhomogeneous deformations that violate the assumptions that underly common rheological definitions. Instead, we demonstrate metrics measured with small-amplitude oscillatory shear that are correlated to the printability of various ink formulations ranging in loading. The rheological measures that accurately predict the printability of the inks are the axial stress measured at small amplitudes, and the critical stress amplitude above which rheological characterizations become impossible. In addition, we estimate the maximum packing fraction for each filler, based on the exponent common to hard sphere models, and show that the printability of each ink can be predicted by the ratio of the packing fraction to the theoretical maximum. We show how small-amplitude oscillatory shear allows users to develop printability criteria for any ink to enhance the workflow in the development of new inks, increase the performance of material extrusion printing, and improve the stability of printed parts, with less wasted time and materials.
Tin-lead-antimony (50Sn–47Pb–3Sb wt.%) soldered assemblies were mechanically tested approximately 30 years after initial production and found to have solder joints of reduced strength. The microstructure of this solder alloy exhibits a ternary eutectic structure with Sn-rich, Pb-rich, and SnSb phases. Accelerated aging was performed to evaluate solder microstructural coarsening and associated strength of laboratory solder joints to correlate these properties to the “naturally aged” solder joints. Isothermal aging was conducted at room temperature, 55, 70, 100, and 135 °C and aging times that ranged from 0.1 to 365 days. The coarsening kinetics of the Pb-rich phase were determined through optical microscopy and image analysis methods established in previous studies on binary Sn–Pb solder. A kinetic equation was developed with time exponent n of 0.43 and activation energy of 24000 J/mol, suggesting grain boundary diffusion or other fast diffusion pathways controlling the microstructural evolution. Compression testing and Vickers microhardness showed significant strength loss within the first 20–30 days after soldering; then, the microstructure and mechanical properties changed more slowly over long periods of time. Further, by combining accelerated aging data and the microstructure-based kinetics, strength predictions were made that match well with the properties of the actual soldered assemblies naturally aged for 30 years. However, aging at the highest temperature of 135 °C produced anomalous behavior suggesting that extraneous aging mechanisms are active. Therefore, data obtained at this temperature or higher should not be used. Overall, the combined microstructural and mechanical property methods used in this study confirmed that the observed reduction in strength of ~ 30-year-old solder joints can be accounted for by the microstructural coarsening that takes place during long-term solid-state aging.
Tin-lead-antimony (50Sn–47Pb–3Sb wt.%) soldered assemblies were mechanically tested approximately 30 years after initial production and found to have solder joints of reduced strength. The microstructure of this solder alloy exhibits a ternary eutectic structure with Sn-rich, Pb-rich, and SnSb phases. Accelerated aging was performed to evaluate solder microstructural coarsening and associated strength of laboratory solder joints to correlate these properties to the “naturally aged” solder joints. Isothermal aging was conducted at room temperature, 55, 70, 100, and 135 °C and aging times that ranged from 0.1 to 365 days. The coarsening kinetics of the Pb-rich phase were determined through optical microscopy and image analysis methods established in previous studies on binary Sn–Pb solder. A kinetic equation was developed with time exponent n of 0.43 and activation energy of 24000 J/mol, suggesting grain boundary diffusion or other fast diffusion pathways controlling the microstructural evolution. Compression testing and Vickers microhardness showed significant strength loss within the first 20–30 days after soldering; then, the microstructure and mechanical properties changed more slowly over long periods of time. Further, by combining accelerated aging data and the microstructure-based kinetics, strength predictions were made that match well with the properties of the actual soldered assemblies naturally aged for 30 years. However, aging at the highest temperature of 135 °C produced anomalous behavior suggesting that extraneous aging mechanisms are active. Therefore, data obtained at this temperature or higher should not be used. Overall, the combined microstructural and mechanical property methods used in this study confirmed that the observed reduction in strength of ~ 30-year-old solder joints can be accounted for by the microstructural coarsening that takes place during long-term solid-state aging.
Good, Forest T.; Laforce, Tara C.; Gross, Michael; Alberts, Erik; Miller, Terry A.; Bourret, Suzanne (Michelle); Guiltinan, Eric; Swager, Katherine; Stauffer, Philip H.
The Disposal Research and Development (R&D) Program of the US Department of Energy (DOE) office of Nuclear Energy (NE-8) Spent Fuel and Waste Science and Technology (SFWST) Campaign is to conduct R&D on disposal of spent nuclear fuel (SNF) and high-level waste (HLW). The goal of the Geologic Disposal Safety Assessment (GDSA) within this project is to develop a disposal system modeling and analysis capability that supports the integrated modeling of coupled processes controlling disposal system performance of deep geologic repositories, including uncertainty. This report describes a specific activity in the Fiscal Year 2024 (FY24) associated with the GDSA Repository Systems Analysis (RSA) work package in collaboration with the GDSA Geologic Modeling work package at Los Alamos National Laboratory (LANL). The overall objective of the GDSA RSA work package is to develop generic deep geologic repository concepts and repository system performance models in crystalline, argillite, salt, and unsaturated alluvium potential host-rock environments, and to simulate and analyze these generic repository concepts and models using GDSA Framework toolkit, and other tools as needed.
Significant vibration amplitudes and cycles can be produced when traffic signal structures with low inherent damping are excited near one of their natural frequencies. For the mitigation of wind-induced vibrations, dynamic vibration absorbers coupled to the structure are often used. Here, this research investigates the performance of a tapered impact damper, consisting of a hanging spring-mass oscillator inside a housing capable of reducing vibration amplitude over a broader frequency range than the conventional tuned mass damper. A nonlinear, two degree-of-freedom model is developed with coordinates representing the traffic structure and the tapered impact damper. This research focuses on the application of the harmonic balance method to approximate the periodic solutions of the nonlinear equations to compute the nonlinear dynamics of the damped traffic signal structure. After designing and manufacturing a tapered impact damper, the traffic signal structure is tested with and without the damper using free vibration snapback tests. The experimental frequency and damping backbone curves are used to validate the analytical model, and the effectiveness of the damper is discussed.
This report summarizes the result of a one year seedling project to investigate unusual twinning behavior in shock loaded additive Ti5552. The twinning behavior only occurs when the β phase of Ti5553 is metastable, and it appears to be a type of double twin involving two different twin variants, first a {332}⟨113⟩ twin forms before being consumed by a specific {112}⟨111⟩ twin variant to create a 20o. This behavior has only been detected during shock loading around incipient spall damage. The twinning is investigated by performing postmortem EBSD and PED analysis of gas-gun loaded specimens and preliminary molecular dynamics simulations.
This report presents the current state of knowledge, technology, methodologies, and tools that could be implemented to realize the robust integration of safety, security, and safeguards (3S) for advanced nuclear reactors (ARs) and advanced nuclear fuel cycle facilities. This report was motivated by the global development of ARs which are expected to play a key role in meeting domestic energy and climate objectives. Domestically, with many ARs in the early design phase, the integration of 3S provides an opportunity to achieve risk reduction while using less resources than traditional light water reactors by leveraging interdependencies and synergies between each domain. In addition, domestic policy considerations encourage the convergence of each 3S domain through facility design and operations. Therefore, there is a need to better understand the interdependencies and integration between 3S across ARs and advanced reactor fuel cycle facilities’ lifecycles including design, construction, and operational phases.
Janicki, Tesia D.; Liu, Rui; Im, Soohyun; Wan, Zhongyi; Butun, Serkan; Lu, Shaoning; Basit, Nasir; Voyles, Paul M.; Evans, Paul G.; Schmidt, J.R.
Strontium titanate (SrTiO3, STO) is a complex metal oxide with a cubic perovskite crystal structure. Due to its easily described and understood crystal structure in the cubic phase, STO is an ideal model system for exploring the mechanistic details of solid-phase epitaxy (SPE) in complex oxides. SPE is a crystallization approach that aims to guide crystal growth at low homologous temperatures to achieve targeted microstructures. Beyond planar thin films, SPE can also exploit the addition of a chemically inert, noncrystallizing, amorphous obstacle in the path of crystallization to generate complex three-dimensional structures. The introduction of this mask fundamentally alters the SPE process, inducing a transition from two- to three-dimensional geometries and from vertical to lateral crystal growth under the influence of the crystal/mask/amorphous boundary. Using a combination of molecular dynamics simulations and experiments, we identify several unique phenomena in the nanoscale growth behaviors in both conventional (unmasked) and masked SPE. Examining conventional SPE of STO, we find that crystallization at the interface is strongly correlated to, and potentially driven by, density fluctuations in the region of the amorphous STO near the crystalline/amorphous interface with a strong facet dependence. In the masked case, we find that the crystalline growth front becomes nonplanar near contact with the mask. We also observe a minimum vertical growth requirement prior to lateral crystallization. Both phenomena depend on the relative bulk and interfacial free energies of the three-phase (crystal/mask/amorphous) system.
The motivation for this work came from the simulation of components subjected to impact. In these problems, repeated loading can be generated by vibrational motion between internal parts of the component or by the occurrence of multiple impacts. Graphs of tensile equivalent plastic strain $(\overline{\varepsilon}_T^\rho)$ versus time from such cases had the character shown in Fig. 1. The equivalent plastic strain grew by alternating periods of accumulation and hold. The periods of hold indicate times when $d\overline{\varepsilon}_T^\rho$ did not accumulate. This can be due to the material unloading into the elastic range, or actually plastically reverse loading with hydrostatic stress σh < 0 as was demonstrated for an impact simulation. Similar observations were made from the simulation of a 2-degree-of-freedom mass-elastic-plastic-spring system subjected to impact.
This study presents the development of a computational framework designed to predict the interaction between permafrost and infrastructure, addressing potential failure modes and mitigation strategies in the context of climate change. The framework, rooted in advanced modeling and simulation (mod/sim) techniques, integrates thermomechanical coupling to account for the complex interplay between heat flow, ice content, and mechanical behavior in permafrost. Existing models fail to fully capture these dynamics, particularly as they relate to the effects of ice saturation on structural integrity. Our innovative Arctic Coastal Erosion (ACE) framework fills this gap by coupling thermal and mechanical models to accurately simulate subsidence and deformation in permafrost environments. We applied the ACE framework to a representative runway, demonstrating its capability to predict settlement due to rising temperatures and subsequent permafrost thaw. This proof-of-concept showcases the potential of the framework to evaluate risks to Arctic infrastructure, which supports over four million people and 70% of existing permafrost-based structures. By simulating various infrastructure types and environmental conditions, our research offers insights into failure mechanisms and evaluates structural solutions to mitigate risk. The anticipated deliverables, including a prototype runway exemplar, position this project as a critical advancement in permafrost infrastructure modeling, with applications in national security and resilience planning.
Many technologies require stable or metastable surface morphology. In this paper we study the factors that control the metastability of a common feature of rough surfaces: "hillocks."We use low energy electron microscopy to follow the evolution of the individual atomic steps in hillocks on Pd(111). We show that the uppermost island in the stack often adopts a static, metastable configuration. Modeling this result shows that the degree of the metastability depends on the configuration of steps dozens of atomic layers lower. Our model allows us to link surface metastability to the atomic processes of surface evolution.
Polymers are an effective test bed for studying topological constraints in condensed matter due to a wide array of synthetically available chain topologies. When linear and ring polymers are blended together, emergent rheological properties are observed as the blend can be more viscous than either of the individual components. This emergent behavior arises since ring-linear blends can form long-lived topological constraints as the linear polymers thread the ring polymers. Here, we demonstrate how the Gauss linking integral can be used to efficiently evaluate the relaxation of topological constraints in ring-linear polymer blends. For majority-linear blends, the relaxation rate of topological constraints depends primarily on reptation of the linear polymers, resulting in the diffusive time τd,R for rings of length NR blended with linear chains of length Nl to scale as τd,R∼NR2NL3.4.
The Xyce™ Parallel Electronic Simulator has been written to support the simulation needs of Sandia National Laboratories’ electrical designers. Xyce™ is a SPICE-compatible simulator with the ability to solve extremely large circuit problems on large-scale parallel computing platforms, but also includes support for most popular parallel and serial computers. For up-to-date information not available at the time these notes were produced, please visit the Xyce™ web page at http://xyce.sandia.gov.
The transmission interference fringe (TIF) technique was developed to visualize the dynamics of evaporating droplets based on the Reflection Interference Fringe (RIF) technique for micro-sized droplets. The geometric formulation was conducted to determine the contact angle (CA) and height of macro-sized droplets without the need for the prism used in RIF. The TIF characteristics were analyzed through experiments and simulations to demonstrate a wider range of contact angles from 0 to 90°, in contrast to RIF's limited range of 0-30°. TIF was utilized to visualize the dynamic evaporation of droplets in the constant contact radius (CCR) mode, observing the droplet profile change from convex-only to convex-concave at the end of dry-out from the interference fringe formation. The TIF also observed the contact angle increase from the fringe radius increase. This observation is uniquely reported as the interference fringe (IF) technique can detect the formation of interference fringe between the reflection from the center convex profile and the reflection from the edge concave profile on the far-field screen. Unlike general microscopy techniques, TIF can detect far-field interference fringes as it focuses beyond the droplet-substrate interface. The formation of the convex-concave profile during CCR evaporation is believed to be influenced by the non-uniform evaporative flux along the droplet surface.
Caskey, Susan A.; Keating, Charles B.; Katina, Polinpapilinho F.; Bradley, Joseph M.; Hodge, Richard; Martin, James N.
The purpose of this paper is to explore the concept of ‘enterprise’ in the context of Systems Engineering (SE). The term ‘enterprise’ has been used extensively to generally describe large complex entities that have an extensive scope of operations. However, a deeper examination of ‘enterprise’ significance for SE can provide insights as our challenges continue with increasingly complex, uncertain, ambiguous, and integrated entities struggling to thrive in the future. The paper explores three central topics. First, the concept of enterprise is introduced as a central aspect of the future focus for SE, as recognized in the INCOSE SE Vision 2035. Second, a more detailed examination of the enterprise concept is developed in relationship to SE. The thrust of this examination is to understand the nature and role of ‘enterprise’ across a broad spectrum of literature and knowledge, ultimately providing a more informed perspective of enterprise for SE. As part of this exploration, a bibliometric analysis of the term ‘enterprise’ is performed. This exploration extracts key themes (clusters) in the ‘enterprise’ literature. Third, challenges for further development and inculcation of ‘enterprise’ within the SE discipline and support for realization of the SE 2035 Vision are suggested. These challenges point out the need to ‘think differently’ about ‘enterprise’ within the SE context. ‘Enterprise’ is proposed as a central, albeit different, perspective for the SE discipline. Finally, the paper closes with a first–generation perspective for ‘enterprise’ in pursuit of the SE Vision 2035.
Organizations play a key role in supporting various societal functions, ranging from environmental governance to the manufacturing of goods. Here, the behaviors of organization are impacted by various influences, including information, technology, authority, economic leverage, historical experiences, and external factors, such as regulations. This paper introduces a generalized framework, focused on the relative structure of an organization (tight vs. loose), that can be used to understand how different influence pathways can impact decision-making within differently structured organizations. This generalized framework is then translated into a modeling and simulation platform to support and assess implications of these structural differences in resilience to disinformation (measured by organizational behaviors of timeliness and inclusion of quality information) using a systems dynamics approach Preliminary results indicate that a tightly structured organization may be less timely at processing information but could be more resilient against using poor quality information in organizational decisions compared to a loosely structured organization. Ongoing work is underway to understand the robustness of these findings and to validate current model design activities with empirical insights.
Estimating spatially distributed properties such as permeability from available sparse measurements is a great challenge in efficient subsurface CO2 storage operations. In this paper, a deep generative model that can accurately capture complex subsurface structure is tested with an ensemble-based inversion method for accurate and accelerated characterization of CO2 storage sites. We chose Wasserstein Generative Adversarial Network with Gradient Penalty (WGAN-GP) for its realistic reservoir property representation and Ensemble Smoother with Multiple Data Assimilation (ES-MDA) for its robust data fitting and uncertainty quantification capability. WGAN-GP are trained to generate high-dimensional permeability fields from a low-dimensional latent space and ES-MDA then updates the latent variables by assimilating available measurements. Several subsurface site characterization examples including Gaussian, channelized, and fractured reservoirs are used to evaluate the accuracy and computational efficiency of the proposed method and the main features of the unknown permeability fields are characterized accurately with reliable uncertainty quantification. Furthermore, the estimation performance is compared with a widely-used variational, i.e., optimization-based, inversion approach, and the proposed approach outperforms the variational inversion method in several benchmark cases. We explain such superior performance by visualizing the objective function in the latent space: because of nonlinear and aggressive dimension reduction via generative modeling, the objective function surface becomes extremely complex while the ensemble approximation can smooth out the multi-modal surface during the minimization. This suggests that the ensemble-based approach works well over the variational approach when combined with deep generative models at the cost of forward model runs unless convergence-ensuring modifications are implemented in the variational inversion.
The Disposal Research and Development (R&D) Program of the US Department of Energy (DOE) office of Nuclear Energy (NE-8) Spent Fuel and Waste Science and Technology (SFWST) Campaign is to conduct R&D on disposal of spent nuclear fuel (SNF) and high-level waste (HLW). The goal of the Geologic Disposal Safety Assessment (GDSA) within this project is to develop a disposal system modeling and analysis capability that supports the integrated modeling of coupled processes controlling disposal system performance of deep geologic repositories, including uncertainty. This report describes specific activities in the Fiscal Year (FY) 2024 associated with the GDSA Repository Systems Analysis (RSA) work package. The overall objective of the GDSA RSA work package is to develop generic deep geologic repository concepts and repository system performance models in crystalline, argillite, salt, and unsaturated alluvium potential host-rock environments, and to simulate and analyze these generic repository concepts and models using GDSA Framework toolkit, and other tools as needed.
MELCOR has been used extensively to facilitate virtual investigations into severe nuclear accidents for light-water reactors (LWRs). Non-light water reactors (non-LWRs) render some LWR-centric approaches potentially unsuitable. MELCOR has been instrumental in analyzing source terms for LWRs and has recently expanded its applicability to non-LWRs. To simplify radionuclide (RN) tracking, MELCOR currently groups elements into 17 classes, each containing representative species. This grouping, optimized for LWRs, is not appropriate for non-LWRs due to the different chemistry. This necessitates a reevaluation of radionuclide transport modeling. This report introduces a new class scheme for MELCOR tailored to MSR modeling, expanding the current 17 classes to 32 and are explained in the context of a UF4 fueled FLiBe carrier MSR. It provides a discussion and justification for the new groupings and outlines a methodology for discovering and defining additional classes in MELCOR using a sample calculated RN inventory and a Gibbs energy minimizer (GEM).
Drill rig parameter measurements are routinely used during deep well construction to monitor and guide drilling conditions for improved performance and reduced costs. While insightful into the drilling process, these measurements are of reduced value without a standard to aid in data evaluation and decision making. In the main body of this work (Volume 1), a method is demonstrated whereby rock reduction model constraints are used to interpret drilling response parameters; the method could be applied in real-time to improve decision-making in the field and to further discern technology performance during post-drilling evaluations. Drilling parameters are evaluated using laboratory-validated rock reduction models for predicting the phenomenological response of drag bits (Detournay and Defourny, 1992) in computational algorithms. The method presented has applicability to development of advanced analytics on future geothermal wells using real-time electronic data recording for improved performance and reduced drilling costs. A drilling cost model is also used to show the tradeoff between rate of penetration and bit life and the influence on interval drilling costs. Details of the bit specifications and performance are cataloged in an independent volume, documented under separate cover, for each of the four wells, and include Volume 2: Utah FORGE 16A(78)-32; Volume 3: Utah FORGE 56-32; Volume 4: Utah FORGE 78B-32 and Volume 5: Utah FORGE 16B(78)-32.
The verification of warhead dismantlement is expected to be an important component in future arms reduction treaties. Historic approaches developed with future arms control treaty verification in mind often involve intrusive measurements, process monitoring, and/or inspector presence to provide confidence that an authentic warhead has been dismantled. This work explores the possibility of reducing the negative impacts of these invasive approaches while also delivering a method that is more likely to provide non-sensitive data that can be shared with not only other nuclear weapons states but also non-nuclear weapons states partners. This work explores a novel approach for verifying dispositioned non-nuclear weapon components, providing confidence post-dismantlement that a treaty accountable item that was dismantled was in fact a treaty-relevant nuclear weapon system as declared. This method provides an alternative to intrusive inspection processes in nuclear weapons production environments, which would require significant changes to the host’s operational behaviors. It achieves this by identifying intrinsic neutron-induced signatures of non-nuclear components to determine their authenticity and estimate the duration they were exposed within a nuclear weapons system using technologies that are already in use for other national security applications. Intrinsic radiation effects studies are already a part of the stockpile aging and surveillance evaluations. However, none of these technologies and approaches have been previously considered for verification applications of non-nuclear component disposition. In this report, we introduce modeling studies that have been used to identify the most promising candidate parts and materials with signatures that are measurable and actionable. These models have been validated with laboratory measurements of signatures induced by the exposure of candidate materials to neutrons over a range of times. Predictive modeling then demonstrates the methodology for estimating exposure times and/or limits. Laboratory measurements of authentic non-nuclear parts from a dismantled warhead demonstrate the feasibility of employing these signature measurements. And finally, a concept of operations (CONOPS) for the potential use of this methodology is presented.
Total Variation optimization penalizes the gradient of a control variable or state. While this work focuses on image processing in particular, it has also found applications in inverse problems and topology optimization. In image processing, the goal is to maintain faithfulness to the original image while denoising and/or deblurring. Additionally, bilevel optimization over the spatially varying regularization weights can illuminate interfaces such as damage regions and other anomalies. We will address two fundamental challenges with TV-optimization: (i) the typical slow convergence of existing TV-optimization methods, and (ii) the selection of spatially varying TV parameters to promote interface detection. Additionally, we will apply such techniques to image data collected in additive manufacturing. In said context, stochasticity in build events induces flaws in the manufactured piece, compromising the integrity of said part. There is a critical need for in-situ monitoring to spot anomalies once they form, and in this setting we apply our total variation and hyperparameter solvers. We will develop a customized algorithm based on for extreme-scale TV-optimization that achieves super-linear or quadratic-convergence, a critical property for real-time, image-by-image analysis. A worst-case outcome is a preprocessing step that enhances image quality in-situ, specifically for out-of-focus and noisy images.
We propose a novel approach to developing formally verified systems through Multi-rigor Agile Verification. Multi-rigor Agile Verification is rooted in the hypothesis of Rigor Independence, that a system’s specification and verification architecture depend primarily on the system requirements to be verified, and they depend very little on the rigor level of the methods used to verify those requirements. Due to its iterative nature, Multi-rigor Agile Verification promises to mitigate many of the high upfront design costs experienced by formally verified systems and to deliver a better-architected, and thus better-trusted, system in the end. We then discuss the tooling needed to perform Multi-rigor Agile Verification and go in depth to build one of those tools, which directly generates executable prototype code from declarative formal specifications using the Maude rewrite-logic framework.
In computer science, Document Summarization is the task of condensing some quantity of text and related content through automated means. In this document, we review recent literature in text summarization. “Hybrid” extractive-abstractive approaches continue to be explored. Some of the latest efforts have also sought to enable users to adjust summaries with queries or other structure and begun to test reinforcement-learning style agentic LLM-based solutions.
Achieving maximum performance in a Z-pinch Magnetized Liner Inertial Fusion (MagLIF) implosion requires high levels of symmetry to reach high pressures, high areal densities, and high efficiency energy coupling between the compressed fuel and the imploding shell. In this work, we present the development of a nonlinear model to describe an asymmetric MagLIF liner undergoing magneto-Rayleigh-Taylor (MRT) instabilities in the z = 0 plane. We investigate and present results from our model that show the degradation of the pressure at stagnation under various kinds of asymmetries that can arise during MagLIF experiments.
FY24 progress for LEMMs: Long-term, Electrochemical Materials degradation Models LDRD project are presented. Significant progress toward creating validated corrosion models was made in this FY paving success in future FY’s for success with battery model development and validation. Specifically, models for various forms of corrosion were probed for sensitivities showing a significant influence of reactive transport parameters for hydroxide species on the run time of the models. Further, cryo-genic time-of-flight secondary ion mass spectroscopy was utilized to map ions in a frozen corrosion droplet showing the precipitates/precipitate species near corroding locations. Additionally, a realistic corrosion droplet was created that accounted for evaporation and condensation coupled with corrosion. This pushes the boundary of corrosion modeling and will be validated in future FY’s.
In this study, different approaches in performance assessment (PA) of the long-term safety of a repository for radioactive waste were examined. This investigation was carried out as part of the DECOVALEX-2023 project, an international collaborative effort for research and model comparison. One specific task of the DECOVALEX-2023 project was the Salt Performance Assessment Modelling task (Salt PA), which aimed at comparing various models and methods employed in the performance assessment of deep geological repositories in salt. In the context of the Salt PA task, three distinct teams from SNL (United States), Quintessa Ltd (United Kingdom), and GRS (Germany) examined the consequences of employing different levels of abstractions when modelling the repository's geometry and implementing various features and processes, using the example of a simple hypothetical repository structure in domal salt. Each team applied their own tools: PFLOTRAN (SNL), QPAC (Quintessa) and LOPOS (GRS). These differ essentially regarding numerical concept and degree of detail in the representation of the underlying physical processes. The discussion focused on when simplifications can be appropriately applied and what consequences result from them. Furthermore, it was explored when and if a higher level of fidelity in geometry or physical processes is required.
Drill rig parameter measurements are routinely used during deep well construction to monitor and guide drilling conditions for improved performance and reduced costs. While insightful into the drilling process, these measurements are of reduced value without a standard to aid in data evaluation and decision making. In the main body of this work (Volume 1), a method is demonstrated whereby rock reduction model constraints are used to interpret drilling response parameters; the method could be applied in real-time to improve decision-making in the field and to further discern technology performance during post-drilling evaluations. Drilling parameters are evaluated using laboratory-validated rock reduction models for predicting the phenomenological response of drag bits (Detournay and Defourny, 1992) in computational algorithms. The method presented has applicability to development of advanced analytics on future geothermal wells using real-time electronic data recording for improved performance and reduced drilling costs. A drilling cost model is also used to show the tradeoff between rate of penetration and bit life and the influence on interval drilling costs. Details of the bit specifications and performance are cataloged in an independent volume, documented under separate cover, for each of the four wells, and include Volume 2: Utah FORGE 16A(78)-32; Volume 3: Utah FORGE 56-32; Volume 4: Utah FORGE 78B-32 and Volume 5: Utah FORGE 16B(78)-32.
In this project we uncovered structure-function relationships of donor-acceptor co-crystals used to develop next-generation optoelectronic devices. Unraveling the photodynamics of molecular crystalline materials poses many challenges for spectroscopy due to broad, overlapping features representing numerous underlying dynamical processes. This leads researchers to make many assumptions about the dynamics of a system in choosing an appropriate kinetic fitting model. Computationally, electronic structure methods are either prohibitively expensive or underdeveloped for computing the excited state structure of molecular materials, especially states that exhibit charge transfer. Researchers must therefore perform calculations of excited electronic states using truncated models of molecular materials. Here we present a joint experimental-theoretical approach to bridging the gap between the photodynamics of a molecular material and its constituent molecules. We focus our efforts on quantifying the timescales and mechanisms of photoexcitation in donor-acceptor co-crystals and donor-acceptor dimers where the lowest-lying excited state is characterized by charge transfer from the donor to the acceptor. We employ ultrafast UV pump, UV-Vis probe transient absorption spectroscopy to unravel the time-resolved spectroscopic signatures of the photodynamics in both the crystalline material and donor-acceptor dimers in solution. We perform electronic structure and excited state dynamics calculations of the dimers to inform kinetic fitting models and assign the spectral features. The photodynamics of the crystal vs. dimer systems have many similarities, enabling unprecedented insights into the formation and evolution of charge transfer excitons in the crystalline systems.
Numerical linear algebra (NLA) underpins huge swaths of computational science and engineering. For scientists and engineers to make the most of the DOE’s computing resources, it is essential that they have access to high-performance implementations of algorithms with best-in-class scalability and reliability. Despite this, prevailing NLA libraries have little to no support for breakthrough algorithms from the field of randomized numerical linear algebra (RandNLA) that have been developed over the past twenty years. The goal of this LDRD was to break a log-jam that had prevented broad adoption of RandNLA. Our work had two thrusts. The first was to develop RandBLAS: a trustworthy and high-performance C++ library for randomized dimension reduction (an operation widely known as sketching). The second was the development of a novel randomized algorithm for computing a challenging type of matrix decomposition known as Householder QR with column pivoting (Householder QRCP). In this one-year late-start LDRD we successfully delivered RandBLAS 1.0 and new CPU and GPU codes for Householder QRCP. RandBLAS has extensive documentation at https://randblas.readthedocs.io/en/stable/. Papers on RandBLAS and and our high-performance QRCP codes are forthcoming.
Laser-based nonlinear optical spectroscopy approaches have enabled the direct sensing of important chemistry in nearly every fundamental or applied field of science. Yet in many applications, increased detectivity is needed to unravel fundamental mechanisms. One possibility is the use of quantum entanglement to increase detection cross-sections, but it is unproven that enhancement from quantum light extends to practical intensities for chemical sensing. In this report, we investigated the creation and use of entangled photons in nonlinear optical mixing for second harmonic generation and infrared imaging. We observe that the linear scaling of nonlinear mixing from entangled photon sources extends to the mW laser power regime, and enhances direct infrared imaging on Si-based charge coupled device cameras. These results motivate future experimentation on practical uses of entangled photons for nonlinear optical sensing applications.
Drill rig parameter measurements are routinely used during deep well construction to monitor and guide drilling conditions for improved performance and reduced costs. While insightful into the drilling process, these measurements are of reduced value without a standard to aid in data evaluation and decision making. In the main body of this work (Volume 1), a method is demonstrated whereby rock reduction model constraints are used to interpret drilling response parameters; the method could be applied in real-time to improve decision-making in the field and to further discern technology performance during post-drilling evaluations. Drilling parameters are evaluated using laboratory-validated rock reduction models for predicting the phenomenological response of drag bits (Detournay and Defourny, 1992) in computational algorithms. The method presented has applicability to development of advanced analytics on future geothermal wells using real-time electronic data recording for improved performance and reduced drilling costs. A drilling cost model is also used to show the tradeoff between rate of penetration and bit life and the influence on interval drilling costs. Details of the bit specifications and performance are cataloged in an independent volume, documented under separate cover, for each of the four wells, and include Volume 2: Utah FORGE 16A(78)-32; Volume 3: Utah FORGE 56-32; Volume 4: Utah FORGE 78B-32 and Volume 5: Utah FORGE 16B(78)-32.
Addressing the need to increase the sample set to understand the causes of lithium battery thermal runaway, we conceived of an experimental platform with capability to increase the number of runaway experiments (currently 3-5 per week), while also collecting detailed electrochemical impedance spectroscopy measurements (EIS). Once expanded, the platform would enable data collection on 10s to 100s of cells that all experience runaway, thereby creating a statistical database necessary to identify early indication of risk. A primary containment unit to house cylindrical cells of variety NMC811 and of size 21700 (21 mm diameter by 70 mm length) was designed with features such as debris containment, preloaded cells in an exchangeable port, nitrogen ventilation, and exhaust containment. We performed the first overcharge abuse experiments of several 21700 cells, handpicked because of different initial EIS, and demonstrated that EIS changes dramatically during early stages of overcharge, but in a different manner than previous pouch cell experiments. The abuse experiments also revealed the discharge pattern and debris field created during runaway, as well as the cell temperature control and overheat, that must be considered in the primary containment apparatus. We designed and built a switching relay system to permit measurement of EIS without an active charging circuit, and created instrument control software for charging, EIS, and cell temperature control. The late-start funding was insufficient to fully construct the primary containment unit, but the foundational design and knowhow is available for any future work.
The Sea Change Project, managed and financed by SWITCH Maritime, produced the first zero-emission 100% hydrogen fuel-cell powered commercial ferry in the world. The MV Sea Change is a 70-foot catamaran equipped with a 360-kW fuel cell powertrain and a 250-bar 246 kg capacity hydrogen storage system. The 75-passenger vessel began public passenger service in July 2024 as part of the San Francisco Bay Ferry system. Summarized here are aspects of the design of the vessel, its construction, and vessel bunkering with high-pressure hydrogen. Results from a fuel cell performance analysis are also presented, along with estimates of the greenhouse gas (GHG) and criterial pollutant emissions assuming different sourcings of hydrogen. Lessons learned from the project will be briefly reviewed.
his report details the findings from the research and investigation of Geometric Measures of Trustworthiness for Machine Learning Predictions. We explored the trustworthiness of machine learning (ML) models’ predictions using geometric measures to quantify the similarity of a query point with the training data. Predictive uncertainty in ML can originate from at least three sources: (1) Model uncertainty, which represents the uncertainty in model form (e.g. decision tree, vs neural network) and estimating the model parameters from the training data, (2) Data uncertainty, which represents the natural complexities of the data such as class overlap and inherent noise, and (3) Distributional uncertainty, which represents the mismatch between the training and operational distributions. The proposed measures focus on measuring and explaining the data and distributional uncertainties by measuring the relationships of operational data with the training data.
The Mt. Pinatubo eruption on 15 June 1991 is often associated with surface warming in the subsequent Northern Hemisphere winter. Employing E3SMv2 with prognostic aerosol modifications, we generated an ensemble of simulations initialized on 1 June 1991 to limit the intra-ensemble variability at the time of the eruption and a more traditional ensemble representing the full range of intra-ensemble variability. For each ensemble member we generated a paired counterfactual simulation with the Pinatub forcing removed allowing for isolation of the Pinatubo impact. In general, the limited variability ensemble has greater coherence in the Pinatubo impact across ensemble members which leads to more statistically robust signals compared to the full variability ensemble. Stratospheric warming patterns from Pinatubo were approximately zonally symmetric and confined between 30°S and 50°N. Isolating localized surface temperature impacts was more difficult, but the limited variability simulation did identify a preferential region of cooling between 20°S to 50°N.
Synchronous condensers have been used in power systems for decades, but they are now attracting interest as a potential means for solving certain issues associated with inverter-based resources in islanded power systems. They have been extensively studied in applications to large wind farms and weak grids, but there has been very little study of synchronous condensers in intentionally-islanded systems, and especially self-healing ones. This report documents the results of an LDRD project intended to create modeling tools for use in the study of synchronous condensers in these smaller off-grid systems, and to explore synchronous condensers in this application. The results indicate that synchronous condensers have the potential to provide many benefits, but there are also several unanswered questions and technical challenges requiring further study.
In several mission contexts, it is desirable to estimate the performance of large language models (LLMs) on tasks that we cannot run directly. In light of published “scaling laws” our hypothesis is that some tasks should be consistently more challenging than others based on characteristics of the task. The goal of this project was to begin quantifying how much information about LLM performance can be gained from the features of a model and a task. Two of our statistical models struggled to converge. Pass/fail test results may provide limited information for inference beyond model quality and task difficulty, but we see no evidence at this time for significant feature interaction effect sizes, arguing for simple models. Future work extending the models to capitalize on perplexity of ground truth answers is suggested. This project also introduces “Depth of Knowledge Variant Testing” as a strategy for more finely assessing language models on open domain question and answer tasks. We developed sets of questions that ask a language model to produce similar information while demonstrating increasing depth of knowledge, and also relabeled existing Q&A test questions with their depth of knowledge. Our results suggest further consideration of Bloom’s taxonomy and further refinement of prompts to properly elicit information at varying depths. In the course of this work, we set up a basic infrastructure for standardizing tasks and testing many language models on these tasks. In addition to testing the predictive quality of model features and performance across test suites, with this project we have introduced two new task features to contextualize each test question: the Dewey Classification main category of information covered, and the Bloom’s taxonomy level that corresponds to the depth of knowledge probed by the question. Splits across these and other features produced over five hundred task subtypes with distinct feature vectors, which we tested on half a dozen models.
Embedded machine-learned models (EMLMs) have the promise to improve the predictive accuracy of engineering simulators in environments of national interest. EMLMs often comprise complex input-output maps (e.g., neural networks), which make them unamenable to rigorous analysis and generally difficult to interpret. In the face of decades of theory, this lack of interpretability is a significant barrier to building confidence in these models. This work outlines an approach to interpret EMLMs using sparse polynomial regression for comparison with theoretical understanding. To do so, we build on the concept of Locally Interpretable Model-agnostic Explanations (LIME) using physics-informed clustering, prototype selection, and library construction. While general, we demonstrate our method on tensor-basis neural networks used in Reynolds-Averaged Navier-Stokes simulations of hypersonic fluid flows. Results are presented for a simulated toy model and for direct numerical simulations (DNS) of turbulent flows over a flat plate.
Increasing the fluence of z-pinch x-ray radiation sources above ∼ 10 keV has been a long-standing goal for scientists at Sandia National Laboratories’ Z Machine. Optimizing sources for non-thermal “cold Kα” emission in higher atomic-number materials appears to be a promising path to increase warm x-ray yield. However, this emission is generated by supra-thermal electrons, which are not treated in the magnetohydrodynamic (MHD) codes that are typically used in z-pinch source development. MHD codes do not allow for charge separation or space-charge-generated electric fields, and constrain particle kinematics to Maxwellian distributions. The kinetic codes which do accommodate discrete, non-thermal energy distributions are computationally prohibitive when modeling plasmas near solid density and when modeling/tracking higher ionization states. Thus, modeling non-thermal z-pinch sources requires a new simulation tool. In this report, we present a new hybrid modeling capability that uses the fast features of MHD-type particles to the greatest extent possible, then transitions to the slower but more complete kinetic particle treatment to correctly capture the particle energy spectra that generate non-thermal emission. This capability is founded on the fully-relativistic particle-in-cell code Chicago, which already includes fluid particle treatments. The governing equations and hybrid methodology presented here are applied in simulations of an argon gas-puff and a molybdenum wire-array to provide preliminary code validation. The argon simulation is compared to measured implosion times and yields from Jones et al., Phys. Plasmas 22, 020706 (2015). The simulated x-ray yield is within 25% of measurements and the implosion times agree within a few percent. The molybdenum wire array simulation captures the implosion timing reported in Hansen et al., Phys. Plasmas 21, 031202 (2014), but work is needed to verify the available EOS table. These exemplar simulations represents the type of non-thermal sources that will be developed using the hybrid code capability going forward.
FLEXO (Flux-Limited Extended-MHD Ohm's Law) is a production-line multiphysics code developed at Sandia to enable more predictive modeling of target physics on pulsed-power devices. FLEXO uses an extended magnetohydrodynamics (XMHD) model which includes a generalized Ohm's law (GOL), an electron inertia term, and Hall physics. This report describes the code's numerical methods, its computational performance, and test problems of interest.
Comprehensive and consistent analysis, characterization, and classification of the wave climate at open-ocean wave energy converter (WEC) test sites guided by international standards enables commensurable evaluation and comparison of met-ocean characteristics, including wave energy resources and wave load conditions. Herein, we present results from a comprehensive feasibility-level met-ocean characterization for two Atlantic Marine Energy Center (AMEC) WEC test sites in the Gulf of Maine.
Afterglow in x-ray imaging for high-speed radiography is a constraint that limits imaging systems to low-light/fast decay screens which create poor data. Current approaches focus purely on using low-light yield screens with fast decay to avoid multiple exposure pileup due to afterglow. The goal of this work is to develop a statistical estimation approach to leverage afterglow to improve image quality thus allowing for higher quality imaging components to be used. This will allow for bright screens will slow decay to be used, and then a post-processing step applies the statistical estimation to separate each frame with superior signal compared to low-light/fast decay screens.
This study examines how organizational structure and stress levels affect decision-making with poor quality information. Using an agent-based model, it finds loosely structured organizations are timely but less effective at filtering bad information, while tightly structured ones are slower but better at filtering. The research highlights a trade-off between timeliness and robustness and suggests an optimal stress level for decision-making efficacy.
This project develops a Bayesian optimization approach to extracting insights from Z Machine experimental data to determine if and how these insights can be used to extrapolate to a larger facility. The primary goal is to address the scientific challenge of informing how confidently experimental conditions can be predicted on a next generation facility, the design of which requires the reliable extrapolation of current high energy density technologies to regimes yet unobserved, except by costly high-fidelity computational models. Maximizing the use of presently available data and understanding how it informs future endeavors is critically important to enable transformative pulsed power and the science of extreme conditions. We explore a Bayesian optimization approach to experimental design which combines information theory, experimental data, and computational modeling to explore how information gain can be maximized.
Hydrogen is known to embrittle austenitic stainless steels, which are widely used in high-pressure hydrogen storage and delivery systems, but the mechanisms that lead to such material degradation are still being elucidated. The current work investigates the deformation behavior of single crystal austenitic stainless steel 316L through combined uniaxial tensile testing, characterization and atomistic simulations. Thermally precharged hydrogen is shown to increase the critical resolved shear stress (CRSS) without previously reported deviations from Schmid's law. Molecular dynamics simulations further expose the statistical nature of the hydrogen and vacancy contributions to the CRSS in the presence of alloying. Slip distribution quantification over large in-plane distances (>1 mm), achieved via atomic force microscopy (AFM), highlights the role of hydrogen increasing the degree of slip localization in both single and multiple slip configurations. The most active slip bands accumulate significantly more deformation in hydrogen precharged specimens, with potential implications for damage nucleation. For 〈110〉 tensile loading, slip localization further enhances the activity of secondary slip, increases the density of geometrically necessary dislocations and leads to a distinct lattice rotation behavior compared to hydrogen-free specimens, as evidenced by electron backscatter diffraction (EBSD) maps. The results of this study provide a more comprehensive picture of the deformation aspect of hydrogen embrittlement in austenitic stainless steels.
Nitrogen-containing organic molecules play essential roles in nearly every aspect of chemistry. The importance of these species within gas-phase chemistry has increased in recent years, due to their emissions from wildfires, crude biofuels, ammonia combustion, and CO2 capture facilities. However, there is a lack of detailed relevant mechanistic and kinetic studies of N-compounds, resulting in poor representation of these pathways within chemical models. In this report, we detail our exploration of the gas-phase oxidation mechanisms of pyrrole, imidazole, pyrrolidine, methylamine, and dimethylamine, done by employing multiplexed VUV photoionization mass spectrometry coupled with KinBot, a computational tool that automatically explores multi-well potential energy surfaces. Overall, we vastly expanded the known gas-phase oxidation mechanisms and chemical kinetics of these species. This work will improve the accuracy and completeness of atmospheric and combustion chemistry models, ultimately leading to better-informed decision-makers in the energy and environmental sectors.
In this study, we present a method for acquiring and characterizing novel microbial consortia that regulates methanogens and methanotrophs through selective cultivation and metagenomic analysis of indigenous microorganisms in the environment. In addition, we present the work performed as part of this project to model the pathways that act as limiting factors in microbial methane metabolism based on a carbon cycle model. In this report, we describe the methods for selective cultivation of methane-metabolism-related microorganisms from environmental samples, the method for monitoring their methane consumption performance, and the method and results for verifying their functions using quantitative PCR and metagenomics techniques. The microbial consortia containing methanotrophs were obtained through selective cultivation and molecular biological verification, and their methane consumption performance was evaluated. In addition, the potential of the existence of bacteriophages interacting with methane metabolism-related microorganisms was identified through metagenomic sequencing.
U.S. nuclear power facilities face increasing challenges in meeting dynamic security requirements caused by evolving and expanding threats while keeping costs reasonable to make nuclear energy competitive. The past approach has often included implementing security features after a facility has been designed and without attention to optimization, which can lead to cost overruns. Incorporating security into the design process can provide robust, cost-effective, and sufficient physical protection systems. The purpose of this report is to capture lessons learned by the Advanced Reactor Safeguards and Security (ARSS) program that may be beneficial for other advanced and small modular reactor (SMR) vendors to use when developing security systems and postures. This report will capture relevant information that can be used in the security-by-design (SeBD) process for SMR and microreactor vendors.
Microstructure drives component behavior. Contemporary crystal plasticity studies compare strain measurements of polycrystal specimens to models. Because each specimen is unique, it is impossible to know which differences are significant. In this project, we invented microstructure clones and explored their use in understanding crystal plasticity. Microstructure clones are specimens with nearly identical microstructures, which allows for multiple destructive tests of a microstructure, insight into how a specimen will deform, variability quantification, and the ability to measure the effects of microstructural changes. Several sets of microstructure clones, pure nickel tensile bars, were tested. The techniques of digital image correlation, crystal plasticity finite element analysis, high resolution electron backscatter diffraction, transmission electron microscopy, and dislocation dynamics were used to understand the structural behavior of these microstructures. This work reshapes the fields of crystal plasticity and structure-property relationships by providing a technique to control for specific variables, quantify microstructural stochasticity, and replicate experiments.
We explore the capability of acoustic and seismoacoustic datasets to directly resolve a complex, time-variable source consisting of a buried mechanism, represented as a moment tensor, and a spall mechanism, represented as a vertical force at the surface. Traditionally, each component of a resolved moment tensor assumes one underlying source time function, which likely fails to capture the full evolution of a dynamic source, such as an explosion followed by slip on near-source joints or development of spallation. Specifically, we expand previous work to resolve a time-variable moment tensor using single-modality and joint-modality inversion frameworks through analysis of infrasound and seismoacoustic data recorded as part of the Source Physics Experiment Phase II: Dry Alluvium Geology (DAG). We investigate the impact of including signals from seismic-to-air coupling that are local to each infrasound sensor in comparison to mainly atmosphere-propagating acoustic signals, which occur from coupling of the wavefield from the subsurface to the atmosphere directly above the source. Additionally, we assess the ability of our inversion algorithm to fit observed infrasound data using a variety of time-variable source mechanisms. First, we consider the buried moment tensor source alone, which assumes that the determined Green’s functions incorporate effects from spallation or that the impact from spallation is minimal. Second, we examine the estimated buried moment tensor and vertical surface spallation as terms that must both be resolved in the inversion. Third, we assess the ability for an estimated vertical surface spallation source to fit the acoustic data on its own. Finally, we compare results from the joint inversion of both seismic geophone and infrasound acoustic data for the buried-only source compared to buried and spallation sources. Our results are a preliminary investigation into the applications of the inversion technique to recorded datasets and show the technique has limited capabilities using acoustic data alone. Instead, this method shows promise for seismic and seismoacoustic datasets to resolve the time-variable mechanisms of a buried source.
The Reynolds-averaged Navier–Stokes (RANS) equations remain a workhorse technology for simulating compressible fluid flows of practical interest. Due to model-form errors, however, RANS models can yield erroneous predictions that preclude their use on mission-critical problems. This report summarizes work performed from FY22-FY24 focused on improving RANS models for hypersonic flows using data-driven modeling and scientific machine learning. In this work we: 1. Investigate the current capabilities of RANS models in Sandia’s parallel aerodynamics and re-entry code (SPARC) for hypersonic flows with a focus on shock boundary layer interactions (SBLIs), 2. Assess several established corrections that exist in the literature aimed at improving predictions for SBLIs, 3. Develop improved models for the Reynolds stress tensor using tensor-basis neural networks, 4. Develop a neural-network-based variable turbulent Prandtl number model to reduce errors in wall heating in SBLIs. 5. Begin future investigations including employing the LIFE framework to improve wall heating predictions in SBLIs as well as the ensemble Kalman filter. We find that current RANS models in SPARC are deficient for complex SBLI flows. In particular, no current model jointly predicts wall heat flux, wall shear stress, and wall pressure with reasonable accuracy. Existing corrections help, but do not alleviate this issue altogether. The development of improved models for the Reynolds stress tensor via tensor-basis neural networks results in more predictive RANS models across a suite of low-speed and high-speed cases. For hypersonic boundary layers, the inclusion of the wall-normal Reynolds stress via TBNNs has an appreciable impact on the wall-normal momentum balance and wall quantities. However, we find that improvements to the Reynolds stress tensor do not address the over-prediction in wall heat flux in SBLIs. We find that a neural-network-based variable turbulent Prandtl number model systematically and substantially improves wall heating predictions for a range of SBLI cases.
The Department of Energy Hydrogen Fuel Cell Technology Office and Wind Energy Technologies Office’s Wind-H2-Green Steel/Ammonia project is an initiative to demonstrate the feasibility and efficacy of GW-scale integrated energy systems. The team designed reference facilities that utilize wind- and solar-produced hydrogen for industrial steel and ammonia production. This novel concept warranted review of safety codes and standards as they apply to the designs and the identification of codes and standards as they apply to the designs and the identification of codes and standards gaps. This report reviews hydrogen production and storage codes and standards using reference design specifications from a Minnesota steel plant. Requirements, recommendations, and exclusions for the system were identified. Observed gaps included non-specific salt cavern storage requirements, electrolyzer capacity beyond regulated ranges, and lack of requirements for iron reduction via hydrogen. This report will aide future project design efforts and may provide a basis for safety reviews in new designs for industrial facilities with hydrogen production integration.
MACCS is used by the Nuclear Regulatory Commission (NRC) and various national and international organizations for probabilistic consequence analysis of nuclear power accidents. This user guide is intended to assist analysts in understanding the MACCS/MACCS-UI User Interface (UI) model and to provide information regarding the code. This user guide version describes MACCS Version 5.0, model history, explains how to set up and execute a problem, and informs the user of the definition of various input parameters and any constraints placed on those parameters. This report is part of a series of reports documenting MACCS. Other reports include the MACCS Theory Manual, MACCS Verification Report, Technical Bases for Consequence Analyses Using MACCS, as well as documentation for preprocessor codes including SecPop, MelMACCS, and COMIDA2.
Piezoelectric materials are used as a power source in stockpile components for safety and reliability assurances. The objective of this project is to gain insights into the fundamental pressure-induced behavior and electromechanical response of lead zirconate titanate (PZT). Specifically, to establish the basis for an accurate, physics-based material model for robust model-based design to rapidly optimize PZT-based materials and components for performance studies. Established ab-initio methods are used to interrogate and understand the dynamic behavior of PZT as a function of composition (50/50, 65/35, 80/20, 95/5) and dopants (La, Nb) to overcome the costly and time-consuming experimental methodologies. New cold curves for pure and doped single-crystal PZT are obtained as the reference equation-of-state (EOS). A negligible change in the pressure responses was observed for the systems and strains studied. Dielectric and piezoelectric responses of pure and doped single-crystal PZT were also calculated as a function of pressure. For undoped PZT, there is a clear and orderly pressure and composition dependence. For doped PZT, there is a significant increase in the responses, but the behavior is very disordered and inconclusive.
This project’s goal was to explore new methods and tools to evaluate the focused ion beam (FIB) effect on active electrical devices, which is becoming increasingly challenged by the continual decrease in transistor geometry. Novel hole transfer methods leveraging FIB patterning were demonstrated utilizing selective area atomic layer deposition (ALD) and metal assisted chemical etching. A FIB damage electrical tester device was fabricated, and the effects of FIB beams were characterized by examining change in performance of damaged transistors. Detailed characterization of end-of-range damage for common FIB ions were correlated to modeling methods. Finally, undamaged and damaged devices were simulated by Charon to begin understanding the FIB effects on active devices. This test platform along with modeling methods give a powerful way to assess FIB damage in materials and devices, and with more development can help establish methods to predict FIB damage effects on electrical devices.
BeyondFingerprinting was a 2021-2024 Sandia Grand Challenge LDRD exploring the potential to develop new resilient materials and manufacturing processes by taking an artificial-intelligence (AI)-guided approach that integrates human-subject-matter expertise with algorithms enriched with physics-based constraints to unearth process-structure-property correlations. Such algorithms, trained on high-throughput experiments and simulations, are shown to serve as surrogate models that efficiently detect key “fingerprints” in materials data, prognose material performance, and guide effective process improvements. To accelerate broader adoption across mission areas, this AI-guided approach was demonstrated with three complex process-centric exemplars: electroplating, physical vapor deposition, and laser powder bed fusion. Together, these exemplars impact nearly every hardware component relevant to DOE and NNSA national security missions.
Bugs in digital logic have led to some significant security vulnerabilities. Hardware bugs are particularly troublesome since they cannot be easily patched. Additionally, if the bug is in the root of trust, all trust built upon it can be vulnerable. Traditional testing either require a deep knowledge of the system, creative attack vectors and lots of human interaction. This is not scalable as there are very few engineers that can wear the hat of a designer, a verification engineer, and a cybersecurity expert. Hardware fuzzing is a relatively new research area in dynamic hardware testing. It has proven to be an effective method for discovering bugs, unexpected behaviors, and security vulnerabilities in software. While hardware fuzzing is new to the hardware domain, it has a strong track record in software testing. Fuzzing is a testing technique that randomly mutates the input data to uncover bugs or vulnerabilities in the design. It is especially good at finding corner cases that test engineers can not envision. Another advantage over other dynamic testing techniques is that, if done well, deep knowledge of the design is not required. Additionally, fuzzing scales well. If the system is set up correctly, it can run unsupervised for weeks if necessary. In this work, we propose using hardware fuzzing to improve the input vector generation for an information flow tracking tool. To get reasonable throughput of test vectors, an emulator is targeted as the execution platform. Efficient emulator execution has some specific requirements.
Surface ion traps are a promising platform for quantum computing due to their potential to store large numbers of ions that can be addressed by electrical and optical control signals in order to implement quantum algorithms. Increasing the power of the quantum computer requires increasing the number of ions, but this poses a significant challenge in that it leads to a non-linear increase in on-chip power dissipation. The primary contributor to this power scaling in current devices is the capacitance between the radio frequency (RF) electrode and the metal plane that shields the silicon substrate from the RF signals applied to it. Silicon has traditionally been chosen for the substrate material for compatibility with the processing required for multi-metal-level traps. In this work, we address these capacitance and fabrication challenges by replacing the commonly used silicon substrate with an insulating sapphire substrate to fabricate a multi-metal-level ion trap, while still employing common semiconductor manufacturing techniques. This change in substrate allows the design to remove the metal shielding from the device design, reducing the capacitance of the RF electrode. The electrical characteristics of these traps were measured, specifically trap impedance, capacitance, and voltage breakdown, and compared to nearly identical silicon trap devices. Finally, we used laser cutting techniques to shape a sapphire wafer into bowtie shapes matching silicon traps previously fabricated at Sandia National Labs to explore solutions for integrating sapphire substrates into non-rectangular ion trap designs.
While quantum computing offers the promise of exponential advantages, limited quantum speedups are known, especially for practical applications. To open new avenues for quantum advantages, we propose Unconventional Quantum Advantages for Computation (U-QuACs), with respect to unconventional resources such as space (number of bits or quantum bits of memory required to solve a problem), accuracy of solution, communication, or energy consumption. We focus on space-efficient quantum algorithms, where we seek to design algorithms that solve a problem using much less space than the total size of the input. A natural setting in which space is critical is the streaming model of computation, where the input data arrives sequentially in pieces that must each be processed individually. Streaming is motivated by a variety of problems including analysis of internet traffic or social networks. We design the first exponential quantum space advantage for a natural streaming problem, which also constitutes the first quantum advantage for approximating a discrete optimization problem, albeit with respect to space.
Seismic imaging methods are critical for Global Security and Energy & Homeland Security missions and activities that rely on subsurface characterization, but traditional methods remain computationally expensive and require significant labor hours and expertise to execute. Within the past few years, machine learning (ML), namely deep learning (DL), has been used to develop data-driven end-to-end full waveform inversion (FWI) methods to estimate 2D P-wave velocity (Vp) models in a fraction of the time as conventional FWI. These methods, however, are trained on simplistic acoustic wave seismic data and Vp models that are not realistic nor representative of real-world observations, leaving a large gap between the state-of-the-art and deployable, feasible, and practical DL FWI methods. Here, we generate a synthetic active-source, 3D, elastic wave seismic data set and a variety of Vp models with realistic geologic structure for training DL FWI methods. We evaluate six different methods that have performed well for acoustic DL FWI or medical imaging tasks using our more realistic dataset. We find that these six trained models do not match the performance of published acoustic end-to-end DL FWI methods, indicating more training data may be needed, physics may need to be incorporated to achieve good accuracy at the sacrifice of the end-to-end advantage, and/or novel methods need to be developed to enable end-to-end DL FWI methods to perform well for real-world seismic data.
Modern computing systems are capable of exascale calculations, which are revolutionizing the development and application of high-fidelity numerical models in computational science and engineering. While these systems continue to grow in processing power, the available system memory has not increased commensurately, and electrical power consumption continues to grow. A predominant approach to limit the memory usage in large-scale applications is to exploit the abundant processing power and continually recompute many low-level simulation quantities, rather than storing them. However, this approach can adversely impact the throughput of the simulation and diminish the benefits of modern computing architectures. We present three novel contributions to reduce the memory burden while maintaining, and sometimes improving, performance in simulations based on finite element discretizations. The first contribution develops dictionary-based data compression schemes that detect and exploit the structure of the discretization, due to redundancies across the finite element mesh. While these schemes are shown to reduce memory requirements by more than 99% on meshes with large numbers of identical mesh cells, there are applications where this structure does not exist. The second contribution leverages a recently developed augmented Lagrangian optimization algorithm to enable r-adaptivity for meshes with the goal of enhancing the redundancies in the mesh. The third contribution extends these methods to patch-based linear solvers and preconditioners by compressing local matrices. Numerical results demonstrate the effectiveness of the proposed methods to detect, enhance and exploit mesh structure on a suite of examples inspired by large-scale applications.
The Gamma Detector Response and Analysis Software (GADRAS) package includes an inverse modeling tool that is helpful in identifying characteristics of unknown radioactive materials. Traditionally, uncertainties in this analysis were derived solely from measurement data quality and the fit of synthetic spectra. This paper aims to rigorously quantify additional sources of uncertainty, focusing on uncertainties arising from measurements being analyzed, Detector Response Function (DRF) characterization, and DRF extrapolation. Applying these findings to the BeRPBall benchmark data set, we demonstrated the impact of these uncertainties on plutonium and polyethylene estimates. The results underscore the importance of incorporating diverse uncertainty sources to enhance the accuracy and reliability of GADRAS’s inverse modeling capabilities.
This project focused on developing topology optimization software to design advanced metal thermal insulators. Initially, solid designs were created that matched the thermal performance of current baseline designs but were significantly heavier. To address this, cellular materials were incorporated, specifically the octet structure which is known for its high strength-to-weight ratio and thermal properties. By leveraging these cellular designs at various densities, superior thermal and mechanical performance was achieved without added weight. This novel approach enhances thermal management and structural integrity under extreme conditions, offering promising advancements for thermal protection systems.
The effects of raw water leaching at the U.S. SPR were modeled using SANSMIC. In addition to 18 caverns identified in previous leaching reports, six caverns have been identified for further monitoring based on the results of this report. SANSMIC continues to serve as a useful tool for monitoring changes in cavern shape. However, some caverns where string cuts were made in the middle of drawdowns are showing overprediction in the SANSMIC model when compared with recent sonars.
Corrosion challenges persist throughout SNL’s mission areas. The primary difficulty lies in the fact that corrosion typically manifests as isolated, rare events, making preemptive identification exceedingly difficult. Our current strategy for addressing corrosion issues, such as anomalies and SFIs, is similarly isolated and reactive. This method is costly, time-consuming, heavily dependent on a limited number of experts, and offers minimal understanding of the overall damage distribution within the stockpile. This technical challenge is not unique to corrosion but is also prevalent in other material aging phenomena, such as tin-whisker growth in lead-free solder and fatigue failure of springs.
This paper describes Secure MQTT, a scheme proposed by Sandia National Laboratories that employs Identity-Based Encryption (IBE) for securing MQTT communications. Secure MQTT assumes and is conformant with an MQTT version 5 environment.
Sandia National Laboratories has fabricated a Seismic Sensor Temperature Testbed (SSTT) suitable for exposing sensors under test to a range of reasonably stable temperatures while a co-located reference sensor is maintained at room temperature. The testbed has proven sufficiently quiet to allow recording of high-coherence signals from regional earthquakes in the passband of the seismometers, allowing a direct comparison of signals between the sensors under test and the reference sensor.
Poster to be presented at the Applied Superconductivity Conference, 2024 in Salt Lake City, Utah in September. This poster details our calculations on the propagation of ballistic fluxon solitons in long Josephson junctions.
Agafonov, Andrei; Pineda-Romero, Nayely; Witman, Matthew D.; Nassif, Vivian; Vaughan, Gavin B.M.; Lei, Lei; Ling, Sanliang; Grant, David M.; Dornheim, Martin; Allendorf, Mark D.; Stavila, Vitalie; Zlotea, Claudia
The vast chemical space of high entropy alloys (HEAs) makes trial-and-error experimental approaches for materials discovery intractable and often necessitates data-driven and/or first principles computational insights to successfully target materials with desired properties. In the context of materials discovery for hydrogen storage applications, a theoretical prediction-experimental validation approach can vastly accelerate the search for substitution strategies to destabilize high-capacity hydrides based on benchmark HEAs, e.g. TiVNbCr alloys. Here, machine learning predictions, corroborated by density functional theory calculations, predict substantial hydride destabilization with increasing substitution of earth-abundant Fe content in the (TiVNb)75Cr25-xFex system. The as-prepared alloys crystallize in a single-phase bcc lattice for limited Fe content x < 7, while larger Fe content favors the formation of a secondary C14 Laves phase intermetallic. Short range order for alloys with x < 7 can be well described by a random distribution of atoms within the bcc lattice without lattice distortion. Hydrogen absorption experiments performed on selected alloys validate the predicted thermodynamic destabilization of the corresponding fcc hydrides and demonstrate promising lifecycle performance through reversible absorption/desorption. This demonstrates the potential of computationally expedited hydride discovery and points to further opportunities for optimizing bcc alloy ↔ fcc hydrides for practical hydrogen storage applications.
Drill rig parameter measurements are routinely used during deep well construction to monitor and guide drilling conditions for improved performance and reduced costs. While insightful into the drilling process, these measurements are of reduced value without a standard to aid in data evaluation and decision making. In the main body of this work (Volume 1), a method is demonstrated whereby rock reduction model constraints are used to interpret drilling response parameters; the method could be applied in real-time to improve decision-making in the field and to further discern technology performance during post-drilling evaluations. Drilling parameters are evaluated using laboratory-validated rock reduction models for predicting the phenomenological response of drag bits (Detournay and Defourny, 1992) in computational algorithms. The method presented has applicability to development of advanced analytics on future geothermal wells using real-time electronic data recording for improved performance and reduced drilling costs. A drilling cost model is also used to show the tradeoff between rate of penetration and bit life and the influence on interval drilling costs. Details of the bit specifications and performance are cataloged in an independent volume, documented under separate cover, for each of the four wells, and include Volume 2: Utah FORGE 16A(78)-32; Volume 3: Utah FORGE 56-32; Volume 4: Utah FORGE 78B-32 and Volume 5: Utah FORGE 16B(78)-32.
Underground chemical explosive testing has been conducted at the Nevada National Security Site under the Physics Experiment 1 (PE1) to validate explosive computer modeling and, ultimately, improve the accuracy of subsurface explosive detection. This SAND Report describes the dynamic temperature and pressure measurements within the chamber induced by the chemical explosive for the first of three experiments, PE1-A. The report details the instrumentation used for the experiment, the emplacement of the hardware, and the measured results. Dynamic temperature measurements were accomplished with the use of optical spectrometers and dynamic pressure was measured with a series of high-rated pressure transducers. This report includes details of the design and results of four cavity sensor systems used to measure early-time temperature, early-time pressure, late-time temperature, and late time pressure. The outcomes of PE1-A were used to inform the design of the remaining PE1 series experiments, PE1-B and PE1-DL.
For multi-scale multi-physics applications e.g., the turbulent combustion code Pele, robust and accurate dimensionality reduction is crucial to solving problems at exascale and beyond. A recently developed technique, Co-Kurtosis based Principal Component Analysis (CoK-PCA) which leverages principal vectors of co-kurtosis, is a promising alternative to traditional PCA for complex chemical systems. To improve the effectiveness of this approach, we employ Artificial Neural Networks for reconstructing thermo-chemical scalars, species production rates, and overall heat release rates corresponding to the full state space. Our focus is on bolstering confidence in this deep learning based non-linear reconstruction through Uncertainty Quantification (UQ) and Sensitivity Analysis (SA). UQ involves quantifying uncertainties in inputs and outputs, while SA identifies influential inputs. One of the noteworthy challenges is the computational expense inherent in both endeavors. To address this, we employ the Monte Carlo methods to effectively quantify and propagate uncertainties in our reduced spaces while managing computational demands. Our research carries profound implications not only for the realm of combustion modeling but also for a broader audience in UQ. By showcasing the reliability and robustness of CoK-PCA in dimensionality reduction and deep learning predictions, we empower researchers and decision-makers to navigate complex combustion systems with greater confidence.
This project helped address the growing need for efficient and scalable models to support geological carbon and energy storage, which are crucial for achieving net-zero emissions. Traditionally accurate high-fidelity numerical models have been used to simulate relevant storage processes under a handful of processes, however such models are computationally demanding, making uncertainty quantification impractical. Consequently, we first developed a machine learning framework, based on Graph Neural Operators (GNOs), to improving the accuracy of model predictions for a fixed computational budget. We then developed an Ensemble of Improved Neural Operators (ENO), which uses bagging and Monte Carlo dropout techniques, to further improve prediction accuracy. Lastly, we developed the way to explain progressive transfer learning methods to reduce the amount of training data and computational cost of training (i.e., reduce trainable parameters) when using our models for multiple storage sites. Our numerical investigation, which used real-world case studies, demonstrated that our framework can significantly improve the safety and efficiency of geological storage operations, with potential applications in other domains such as geothermal reservoirs and climate modeling.
The motivation behind this research is the growing challenge of handling the massive amounts of data generated by modern imaging systems. Conventional digital image processing techniques are struggling to keep pace with the demands of high-resolution and high-speed imaging systems for remote sensing due to their high-power consumption and data storage requirements. We present a novel approach based on analog photonics to address this challenge. The proposed system utilizes a silicon-photonics-based image encoder positioned after image formation and initial optical-to-electrical conversion. The photonic encoder compresses image data using a passive disordered photonic structure to perform kernel-type random projections of the raw data. The compressed data is then processed by a back-end neural network, which reconstructs the original image with high fidelity (structural similarity exceeding 90%). Our proposed approach has the potential to compress images with ~ 1000X lower power consumption compared to digital approaches with data rates exceeding 1 terapixel/second.
Two complementary approximations for describing aspects of continuum electromagnetics in moving media are discussed: electroquasistatic and magnetoquasistatic. Each has been implemented in the finite element shock code ALEGRA for modeling dynamic electromechanical phenomena on typical engineering time scales, with fully integrated circuit coupling (Niederhaus et al. 2023). The approximations can be obtained by consistent asymptotic balancing of Maxwell's equations relative to timescales associated with magnetic diffusion, charge relaxation, and electromagnetic wave propagation. In ALEGRA, the electroquasistatic approximation is used for ferroelectric (FE) modeling, while the magnetoquasistatic approximation is used for magnetohydrodynamic (MHD) modeling. In this paper we introduce for the first time a detailed derivation of a useful quasi-steady “low-Rm” variant of the MHD approximation applicable for cases, such as with detonators, where the thermodynamic pressure arising from Joule heating dominates over magnetic forces. An additional purpose of this paper is to present a coupling mode using Multiple Program-Multiple Data (MPMD) message passing communication that allows the user to run 3D FE problems together with 2D and/or 3D MHD problems with the respective simulation domains coupled through a common circuit equation. The MPMD coupling capability is used here to model the dynamic coupling of a notional ferroelectric generator with an RP-87 exploding bridgewire detonator. The simulated bridgewire heats up and bursts under current generated by simulated depoling of the ferroelectric generator, as a demonstration of the MPMD capability.
The purpose of this guide is to serve as an introduction to practical usage of MAPIT and it’s underlying principles. This guide is not intended to be an comprehensive guide to safeguards or material accountancy. The reader is encouraged to review suggestions for additional reading in the theory guide for further understanding.
Low temperature plasmas (LTPs) are an enabling technology behind reducing device dimensions and the continuation of Moore’s Law. It is estimated that 40-45% of all process steps necessary to manufacture semiconductor devices involve LTPs [4]. However, challenges in plasma process design and continuous incorporation of novel materials for new device architectures are pushing the limits of what is possible with current plasma technology. For example, creating higher aspect ratio structures and etching features at the atomic scale both require finer control of the ion energy/velocity at wafer surfaces. To support these types of future innovations in the plasma processing systems that Sandia and the DOE rely upon, we have developed novel diagnostics, simulations, and machine learning capabilities to discover, characterize, and predict plasma phenomena affecting the ion energy/velocity distribution function (IEDF). These efforts also supported research program devel opment and external collaboration with industry and academia through Sandia’s Plasma Research Facility (PRF). This report will focus on the following topics and accomplishments of this three year LDRD project, briefly summarized.
This report summarizes the findings of a four months FY24 Advanced Science & Technology (AS&T) LDRD Quick Targeted Investigation (QTI) project focused on the exploration of supervised dimension reduction approaches based on autoencoders. Autoencoders have been extensively employed in literature for unsupervised learning tasks, however, their use for supervised regression tasks, which are common within scientific applications, has been limited. Motivated by linear dimension reduction strategies like Active Subspaces and Adaptive Basis, we explored the possibility of employing autoencoders to discover a non-linear manifold able to represent the original function in fewer dimensions. In this report, we discuss a neural network architecture and we perform a numerical campaign on several problems ranging from simple two-dimensional functions to a model problem for magnetohydrodynamics in five dimensions. In our preliminary results, we show that the proposed approach is found to be superior to linear dimension reduction strategies in representing the target function even with a single latent variable.
