Publications

Pozzolans rich in silica and alumina react with lime to form cementing compounds and are incorporated into portland cement as supplementary cementitious materials (SCMs). However, pozzolanic reactions progress slower than portland cement hydration, limiting their use in modern construction due to insufficient early-age strength. Hence, alternative SCMs that enable faster pozzolanic reactions are necessary including synthetic zeolites, which have high surface areas and compositional purity that indicate the possibility of rapid pozzolanic reactivity. Synthetic zeolites with varying cation composition (Na-zeolite, H-zeolite), SiO2/Al2O3 ratio, and framework type were evaluated for pozzolanic reactivity via Ca(OH)2 consumption using ion exchange and in-situ X-ray diffraction experiments. Na-zeolites exhibited limited exchange reactions with KOH and Ca(OH)2 due to the occupancy of acid sites by Na+ and hydroxyl groups. Meanwhile, H-zeolites readily adsorbed K+ and Ca2+ from a hydroxide solution by exchanging cations with H+ at Brønsted acid sites or cation adsorption at vacant acid sites. By adsorbing cations, the H-zeolite reduced the pH and increased Ca2+ solubility to promote pozzolanic reactions in a system where Ca(OH)2 dissolution/diffusion was a rate limiting factor. High H-zeolite reactivity resulted in 0.8 g of Ca(OH)2 consumed per 1 g of zeolites after 16 h of reaction versus 0.4 g of Ca(OH)2 consumed per 1 g of Na-zeolite. The H-zeolite modulated the pore fluid alkalinity and created a low-density amorphous silicate phase via mechanisms analogous to two-step C-S-H nucleation experiments. Controlling these reaction mechanisms is key to developing next generation pozzolanic cementitious systems with comparable hydration rates to portland cement.

Abstract not provided.

Risks associated with carbonation are a key limitation to greater replacement levels of ordinary portland cement (OPC) by supplementary cementitious materials (SCMs). The addition of pozzolanic SCMs in OPC alters the hydrate assemblage by forming phases like calcium-(alumina)-silicate-hydrate (C-(A)-S-H). The objective of the present study was to elucidate how such changes in hydrate assemblage influence the chemical mechanisms of carbonation in a realistic OPC system. Here, we show that synthetic zeolite Y (faujasite) is a highly reactive pozzolan in OPC that reduces the calcium content of hydration products via prompt consumption of calcium hydroxide from the evolving phase assemblage prior to CO2 exposure. Suppression of portlandite at moderate to high zeolite Y content led to a more damaging mechanism of carbonation by disrupting the formation of a passivating carbonate layer. Without this layer, carbonation depth and CO2 uptake are increased. Binders containing 12–18% zeolite Y by volume consumed all the calcium hydroxide from OPC during hydration and reduced the Ca/(Si+Al) ratio of the amorphous products to near 0.67. In these cases, higher carbonation depths were observed after exposure to ambient air with decalcification of C-(A)-S-H as the main source of CO2 buffering. Binders with either 0% or 4% zeolite Y contained calcium hydroxide in the hydrated microstructure, had higher Ca/(Si+Al) ratios, and formed a calcite-rich passivation layer that halted deep carbonation. Although the carbonated layer in the samples with 12% and 18% zeolite Y contained 70% and 76% less calcite than the OPC respectively, their higher carbonation depths resulted in total CO2 uptakes that were 12x greater than the OPC sample. Passivation layer formation in samples with calcium hydroxide explains this finding and was further supported by thermodynamic modeling. High Si/Al zeolite additives to OPC should be balanced with the calcium content for optimal carbonation resistance.

Abstract not provided.

Abstract not provided.

Abstract not provided.