Publications

In the near future, grid operators are expected to regularly use advanced distributed energy resource (DER) functions, defined in IEEE 1547-2018, to perform a range of grid-support operations. Many of these functions adjust the active and reactive power of the device through commanded or autonomous modes, which will produce new stresses on the grid-interfacing power electronics components, such as DC/AC inverters. In previous work, multiple DER devices were instrumented to evaluate additional component stress under multiple reactive power setpoints. We utilize quasi-static time-series simulations to determine voltage-reactive power mode (volt-var) mission profile of inverters in an active power system. Mission profiles and loss estimates are then combined to estimate the reduction of the useful life of inverters from different reactive power profiles. It was found that the average lifetime reduction was approximately 0.15% for an inverter between standard unity power factor operation and the IEEE 1547 default volt-var curve based on thermal damage due to switching in the power transistors. For an inverter with an expected 20-year lifetime, the 1547 volt-var curve would reduce the expected life of the device by 12 days. This framework for determining an inverter's useful life from experimental and modeling data can be applied to any failure mechanism and advanced inverter operation.

In the near future, grid operators are expected to regularly use advanced distributed energy resource (DER) functions, defined in IEEE 1547-2018, to perform a range of grid-support operations. Many of these functions adjust the active and reactive power of the device through commanded or autonomous modes, which will produce new stresses on the grid-interfacing power electronics components, such as DC/AC inverters. In previous work, multiple DER devices were instrumented to evaluate additional component stress under multiple reactive power setpoints. We utilize quasi-static time-series simulations to determine voltage-reactive power mode (volt-var) mission profile of inverters in an active power system. Mission profiles and loss estimates are then combined to estimate the reduction of the useful life of inverters from different reactive power profiles. It was found that the average lifetime reduction was approximately 0.15% for an inverter between standard unity power factor operation and the IEEE 1547 default volt-var curve based on thermal damage due to switching in the power transistors. For an inverter with an expected 20-year lifetime, the 1547 volt-var curve would reduce the expected life of the device by 12 days. This framework for determining an inverter's useful life from experimental and modeling data can be applied to any failure mechanism and advanced inverter operation.

The Multi-Fidelity Toolkit (MFTK) is a simulation tool being developed at Sandia National Laboratories for aerodynamic predictions of compressible flows over a range of physics fidelities and computational speeds. These models include the Reynolds-Averaged Navier–Stokes (RANS) equations, the Euler equations, and modified Newtonian aerodynamics (MNA) equations, and they can be invoked independently or coupled with hierarchical Kriging to interpolate between high-fidelity simulations using lower-fidelity data. However, as with any new simulation capability, verification and validation are necessary to gather credibility evidence. This work describes formal code-and solution-verification activities. Code verification is performed on the MNA model by comparing with an analytical solution for flat-plate and inclined-plate geometries. Solution-verification activities include grid-refinement studies of HIFiRE-1 wind tunnel measurements, which are used for validation, for all model fidelities.

The Cramér-Rao Lower Bound (CRLB) is used as a classical benchmark to assess estimators. Online algorithms for estimating modal properties from ambient data, i.e., mode meters, can benefit from accurate estimates of forced oscillations. The CRLB provides insight into how well forced oscillation parameters, e.g., frequency and amplitude, can be estimated. Previous works have solved the lower bound under a single-channel PMU measurement; thus, this paper extends works further to study CRLB under two-channel PMU measurements. The goal is to study how correlated/uncorrelated noise can affect estimation accuracy. Interestingly, these studies shows that correlated noise can decrease the CRLB in some cases. This paper derives the CRLB for the two-channel case and discusses factors that affect the bound.

Wave energy converters have yet to reach broad market viability. Traditionally, levelized cost of energy has been considered the ultimate stage gate through which wave energy developers must pass in order to find success (i.e., the levelized cost of wave energy must be less than that of solar and wind). However, real world energy decisions are not based solely on levelized cost of energy. In this study, we consider the energy mix in California in the year 2045, upon which the state plans to achieve zero carbon energy production. By considering temporal electricity production and consumption, we are able to perform a more informed analysis of the decision process to address this challenge. The results show that, due to high level of ocean wave energy in the winter months, wave energy provides a valuable complement to solar and wind, which have higher production in the summer. Thus, based on this complementary temporal aspect, wave energy appears cost-effective, even when the cost of installation and maintenance is twice that of solar and wind.

An RF switch technique applying differential signal cancellation is presented. The proposed approach enables high isolation and extremely small size by employing cascode current steering within a differential amplifier. Unlike series RF switches, isolation is limited by device mismatch, not switch parasitic capacitance, enabling high frequency operation. Since the switch is within the already present cascode devices, there is no additional insertion loss from the switch. The switch was implemented in a 180 nm CMOS process within an amplifier as part of an on-chip receiver and achieves 36-43 dB isolation across 0.5-2 GHz, while occupying an area of only 0.0006 mm2.

Rock salt is being considered as a medium for energy storage and radioactive waste disposal. A Disturbed Rock Zone (DRZ) develops in the immediate vicinity of excavations in rock salt, with an increase in permeability, which alters the migration of gases and liquids around the excavation. When creep occurs adjacent to a stiff inclusion such as a concrete plug, it is expected that the stress state near the inclusion will become more hydrostatic and less deviatoric, promoting healing (permeability reduction) of the DRZ. In this scoping study, we measured the permeability of DRZ rock salt with time adjacent to inclusions (plugs) of varying stiffness to determine how the healing of rock salt, as reflected in the permeability changes, is a function of the stress and time. Samples were created with three different inclusion materials in a central hole along the axis of a salt core: (i) very soft silicone sealant, (ii) sorel cement, and (iii) carbon steel. The measured permeabilities are corrected for the gas slippage effect. We observed that the permeability change is a function of the inclusion material. The stiffer the inclusion, the more rapidly the permeability reduces with time.

As renewable energy penetration increases and system inertia levels drop, primary frequency control is becoming a critical concern in relatively small interconnections such as the Electric Reliability Council of Texas (ERCOT). To address this problem ERCOT is implementing a number of market rule changes including the introduction of a new Fast Frequency Response (FFR) reserve type to the electricity market. This FFR reserve type aims to help the traditional Primary Frequency Response (PFR) reserve type in arresting frequency decline in the event of a large generator outage. This paper derives reserve requirements to ensure sufficient reserve to arrest frequency decline before reaching the critical frequency threshold while coupling PFR reserve, FFR reserve, and system inertia. The general reserve requirement places limits on the amount of PFR reserve that can be provided by each unit based on its ramping capabilities. Two such limits are derived from first principles and another is proposed that is capable of accommodating the equivalency ratio introduced in previous work. These PFR reserve limits also provide first principles insight into equivalency ratios, which have only been studied empirically in the past. High-level insights are provided on a large Texas test case.

As trapped ion systems add more ions to allow for increasingly sophisticated quantum processing and sensing capabilities, the traditional optical-mechanical laboratory infrastructure that make such systems possible are in some cases the limiting factor in further growth of the systems. One promising solution is to integrate as many, if not all, optical components such as waveguides and gratings, single-photon detectors, and high extinction ratio optical switches/modulators either into ion traps themselves or into auxiliary devices that can be easily integrated with ion traps. Here we report on recent efforts at Sandia National Laboratories to include integrated photonics in our surface ion trap platforms.

Type 2 high-pressure hydrogen vessels for storage at hydrogen refueling stations are designed assuming a predefined operational pressure cycle and targeted autofrettage conditions. However, the resulting finite life depends significantly on variables associated with the autofrettage process and the pressure cycles actually realized during service, which many times are not to the full range of the design. Clear guidance for cycle counting is lacking, therefore industry often defaults to counting every repressurization as a full range pressure cycle, which is an overly conservative approach. In-service pressure cycles used to predict the growth of cracks in operational pressure vessels results in significantly longer life, since most in-service pressure cycles are only a fraction of the full design pressure range. Fatigue crack growth rates can vary widely for a given pressure range depending on the details of the residual strains imparted during the autofrettage process because of their influence on crack driving forces. Small changes in variables associated with the autofrettage process, e.g., the target autofrettage overburden pressure, can result in large changes in the residual stress profile leading to possibly degraded fatigue life. In this paper, computational simulation was used for sensitivity studies to evaluate the effect of both operating conditions and autofrettage conditions on fatigue life for Type 2 highpressure hydrogen vessels. The analysis in this paper explores these sensitivities, and the results are used to provide guidance on cycle counting. In particular, we identify the pressure cycle ranges that can be ignored over the life of the vessel as having negligible effect on fatigue life. This study also examines the sensitivity of design life to the autofrettage process and the impact on life if the targeted residual strain is not achieved during manufacturing.

We used a micro-fabricated fused silica light guide plate to uniformly illuminate a GaAs photovoltaic array with a fiber-coupled 808 nm laser. Greater than 1 Watt of galvanically-isolated electrical power was generated from this compact edge-illuminated monochromatic photovoltaic module.

The postclosure criticality safety assessment for the direct disposal of dual-purpose canisters (DPCs) in a geologic repository includes considerations of transient criticality phenomena. The power pulse from a hypothetical transient criticality event in an unsaturated alluvial repository is evaluated for a DPC containing 37 spent pressurized water reactor (PWR) assemblies. The scenario assumes that the conditions for baseline criticality are achieved through flooding with groundwater and progressive failure of neutron absorbing media. A preliminary series of steady-state criticality calculations is conducted to characterize reactivity feedback due to absorber degradation, Doppler broadening, and thermal expansion. These feedback coefficients are used in an analysis with a reactor kinetics code to characterize the transient pulse given a positive reactivity insertion for a given length of time. The time-integrated behavior of the pulse can be used to model effects on the DPC and surrounding barriers in future studies and determine if transient criticality effects are consequential.

Centered on modern C++ and the SYCL standard for heterogeneous programming, Data Parallel C++ (dpc++) and Intel's oneAPI software ecosystem aim to lower the barrier to entry for the use of accelerators like FPGAs in diverse applications. In this work, we consider the usage of FPGAs for scientific computing, in particular with a multigrid solver, MueLu. We report on early experiences implementing kernels of the solver in DPC++ for execution on Stratix 10 FPGAs, and we evaluate several algorithmic design and implementation choices. These choices not only impact performance, but also shed light on the capabilities and limitations of DPC++ and oneAPI.

As transistors have been scaled over the past decade, modern systems have become increasingly susceptible to faults. Increased transistor densities and lower capacitances make a particle strike more likely to cause an upset. At the same time, complex computer systems are increasingly integrated into safety-critical systems such as autonomous vehicles. These two trends make the study of system reliability and fault tolerance essential for modern systems. To analyze and improve system reliability early in the design process, new tools are needed for RTL fault analysis.This paper proposes Eris, a novel framework to identify vulnerable components in hardware designs through fault-injection and fault propagation tracking. Eris builds on ESSENT - a fast C/C++ RTL simulation framework - to provide fault injection, fault tracking, and control-flow deviation detection capabilities for RTL designs. To demonstrate Eris' capabilities, we analyze the reliability of the open source Rocket Chip SoC by randomly injecting faults during thousands of runs on four microbenchmarks. As part of this analysis we measure the sensitivity of different hardware structures to faults based on the likelihood of a random fault causing silent data corruption, unrecoverable data errors, program crashes, and program hangs. We detect control flow deviations and determine whether or not they are benign. Additionally, using Eris' novel fault-tracking capabilities we are able to find 78% more vulnerable components in the same number of simulations compared to RTL-based fault injection techniques without these capabilities. We will release Eris as an open-source tool to aid future research into processor reliability and hardening.

Here, we describe the isolation of 18 unique anti SARS-CoV-2 human single-chain antibodies from an antibody library derived from healthy donors. The selection used a combination of phage and yeast display technologies and included counter-selection strategies meant to direct the selection of the receptor-binding motif (RBM) of SARS-CoV-2 spike protein’s receptor binding domain (RBD2). Selected antibodies were characterized in various formats including IgG, using flow cytometry, ELISA, high throughput SPR, and fluorescence microscopy. We report antibodies’ RBD2 recognition specificity, binding affinity, and epitope diversity, as well as ability to block RBD2 binding to the human receptor angiotensin-converting enzyme 2 (ACE2) and to neutralize authentic SARS-CoV-2 virus infection in vitro. We present evidence supporting that: 1) most of our antibodies (16 out of 18) selectively recognize RBD2; 2) the best performing 8 antibodies target eight different epitopes of RBD2; 3) one of the pairs tested in sandwich assays detects RBD2 with sub-picomolar sensitivity; and 4) two antibody pairs inhibit SARS-CoV-2 infection at low nanomolar half neutralization titers. Based on these results, we conclude that our antibodies have high potential for therapeutic and diagnostic applications. Importantly, our results indicate that readily available non immune (naïve) antibody libraries obtained from healthy donors can be used to select high-quality monoclonal antibodies, bypassing the need for blood of infected patients, and offering a widely accessible and low-cost alternative to more sophisticated and expensive antibody selection approaches (e.g. single B cell analysis and natural evolution in humanized mice).

To meet the challenges oflow-carbon power generation, distributed energy resources (DERs) such as solar and wind power generators are now widely integrated into the power grid. Because of the autonomous nature of DERs, ensuring properly regulated output voltages of the individual sources to the grid distribution system poses a technical challenge to grid operators. Stochastic, model-free voltage regulations methods such as deep reinforcement learning (DRL) have proven effective in the regulation of DER output voltages; however, deriving an optimal voltage control policy using DRL over a large state space has a large computational time complexity. In this paper we illustrate a computationally efficient method for deriving an optimal voltage control policy using a parallelized DRL ensemble. Additionally, we illustrate the resiliency of the control ensemble when random noise is introduced by a cyber adversary.

For the resiliency of both small and large distribution systems, the concept of microgrids is arising. The ability for sections of the distribution system to be 'self-sufficient' and operate under their own energy generation is a desirable concept. This would allow for only small sections of the system to be without power after being affected by abnormal events such as a fault or a natural disaster, and allow for a greater number of consumers to go through their lives as normal. Research is needed to determine how different forms of generation will perform in a microgrid, as well as how to properly protect an islanded system. While synchronous generators are well understood and generally accepted amongst utility operators, inverter-based resources (IBRs) are less common. An IBR's fault characteristic varies between manufacturers and is heavily based on the internal control scheme. Additionally, with the internal protections of these devices to not damage the switching components, IBRs are usually limited to only 1.1-2.5p.u. of the rated current, depending on the technology. This results in traditional protection methods such as overcurrent devices being unable to 'trip' in a microgrid with high IBR penetration. Moreover, grid-following inverters (commonly used for photovoltaic systems) require a voltage source to synchronize with before operating. Also, these inverters do not provide any inertia to a system. On the other hand, grid-forming inverters can operate as a primary voltage source, and provide an 'emulated inertia' to the system. This study will look at a small islanded system with a grid-forming inverter, and a grid-following inverter subjected to a line-to-ground fault.

The goal of this paper is to present a set of measurements from a benchmark structure containing two bolted joints to support future efforts to predict the damping due to the joints and to model nonlinear coupling between the first two elastic modes. Bolted joints introduce nonlinearities in structures, typically causing a softening in the natural frequency and an increase in damping because of frictional slip between the contact interfaces within the joint. These nonlinearities pose significant challenges when characterizing the response of the structure under a large range of load amplitudes, especially when the modal responses become coupled, causing the effective damping and natural frequency to not only depend on the excitation amplitude of the targeted mode, but also the relative amplitudes of other modes. In this work, two nominally identical benchmark structures, known in some prior works as the S4 beam, are tested to characterize their nonlinear properties for the first two elastic modes. Detailed surface measurements are presented and validated through finite element analysis and reveal distinct contact interactions between the two sets of beams. The free-free test structures are excited with an impact hammer and the transient response is analyzed to extract the damping and frequency backbone curves. A range of impact amplitudes and drive points are used to isolate a single mode or to excite both modes simultaneously. Differences in the nonlinear response correlate with the relative strength of the modes that are excited, allowing one to characterize mode coupling. Each of the beams shows different nonlinear properties for each mode, which is attributed to the different contact pressure distributions between the parts, although the mode coupling relationship is found to be consistent between the two. The test data key finding are presented in this paper and the supporting data is available on a public repository for interested researchers.

Large-scale deployment of energy storage systems is a pivotal step toward achieving the clean energy goals of the future. An accurate and publicly accessible database on energy storage projects can help accelerate deployment by providing valuable information and characteristic data to different stakeholders. The U.S. Department of Energy's Global Energy Storage Database (GESDB) aims at providing high-quality and accurate data on energy storage projects around the globe. This paper first provides an overview of the GESDB, briefly describing its features and overall usage. This is followed by a detailed description of the procedure used to validate the database. In doing so, the paper aims at improving the usability of the website while enhancing its value to the community. Furthermore, the presented validation procedure makes the underlying assumptions transparent to the public so that data misinterpretation can be minimized/avoided.

The proper coordination of power system protective devices is essential for maintaining grid safety and reliability but requires precise knowledge of fault current contributions from generators like solar photovoltaic (PV) systems. PV inverter fault response is known to change with atmospheric conditions, grid conditions, and inverter control settings, but this time-varying behavior may not be fully captured by conventional static fault studies that are used to evaluate protection constraints in PV hosting capacity analyses. To address this knowledge gap, hosting capacity protection constraints were evaluated on a simplified test circuit using both a time-series fault analysis and a conventional static fault study approach. A PV fault contribution model was developed and utilized in the test circuit after being validated by hardware experiments under various irradiances, fault voltages, and advanced inverter control settings. While the results were comparable for certain protection constraints, the time-series fault study identified additional impacts that would not have been captured with the conventional static approach. Overall, while conducting full time-series fault studies may become prohibitively burdensome, these findings indicate that existing fault study practices may be improved by including additional test scenarios to better capture the time-varying impacts of PV on hosting capacity protection constraints.

Creation of streaming video stimuli that allow for strict experimental control while providing ease of scene manipulation is difficult to achieve but desired by researchers seeking to approach ecological validity in contexts that involve processing streaming visual information. To that end, we propose leveraging video game modding tools as a method of creating research quality stimuli. As a pilot effort, we used a video game sandbox tool (Garry’s Mod) to create three steaming video scenarios designed to mimic video feeds that physical security personnel might observe. All scenarios required participants to identify the presences of a threat appearing during the video feed. Each scenario differed in level of complexity, in that one scenario required only location monitoring, one required location and action monitoring, and one required location, action, and conjunction monitoring in that when an action was performed it was only considered a threat when performed by a certain character model. While there was no behavioral effect of scenario in terms of accuracy or response times, in all scenarios we found evidence of a P300 when comparing response to threatening stimuli to that of standard stimuli. Results therefore indicate that sufficient levels of experimental control may be achieved to allow for the precise timing required for ERP analysis. Thus, we demonstrate the feasibility of using existing modding tools to create video scenarios amenable to neuroimaging analysis.

Grid operating security studies are typically employed to establish operating boundaries, ensuring secure and stable operation for a range of operation under NERC guidelines. However, if these boundaries are violated, the existing system security margins will be largely unknown. As an alternative to the use of complex optimizations over dynamic conditions, this work employs the use of Reinforcement-based Machine Learning to identify a sequence of secure state transitions which place the grid in a higher degree of operating security with greater static and dynamic stability margins. The approach requires the training of a Machine Learning Agent to accomplish this task using modeled data and employs it as a decision support tool under severe, near-blackout conditions.

This paper uses clusters of solar photovoltaic units, wind turbines, and battery energy storage systems as a single controllable plant and proposes a method to enable adaptive plant wide droop control. Each of these clusters is defined as a Flexpower plant. The proposed control is presented with multiple configurations that enable the same overall droop characteristic to the Flexpower plant, but use each of the resource technologies in a different manner. One of the control configurations considers the availability of the resources for wind and solar units, as well as the state of charge of energy storage units, when distributing droop action to each unit that comprise the Flexpower plant. The proposed approaches were tested in a small power system where it is shown that the Flexpower plant can provide frequency regulation to the system in a variety of ways depending on which of the proposed control configurations was selected.

Using neural networks to solve variational problems, and other scientific machine learning tasks, has been limited by a lack of consistency and an inability to exactly integrate expressions involving neural network architectures. We address these limitations by formulating a polynomial-spline network, a novel shallow multilinear perceptron (MLP) architecture incorporating free knot B-spline basis functions into a polynomial mixture-of-experts model. Effectively, our architecture performs piecewise polynomial approximation on each cell of a trainable partition of unity while ensuring the MLP and its derivatives can be integrated exactly, obviating a reliance on sampling or quadrature and enabling error-free computation of variational forms. We demonstrate hp-convergence for regression problems at convergence rates expected from approximation theory and solve elliptic problems in one and two dimensions, with a favorable comparison to adaptive finite elements.

We present an autodifferentiable spectral modeling of exoplanets and brown dwarfs. This model enables a fully Bayesian inference of the high-dispersion data to fit the ab initio line-by-line spectral computation to the observed spectrum by combining it with the Hamiltonian Monte Carlo in recent probabilistic programming languages. An open-source code, ExoJAX (https://github.com/HajimeKawahara/exojax), developed in this study, was written in Python using the GPU/TPU compatible package for automatic differentiation and accelerated linear algebra, JAX. We validated the model by comparing it with existing opacity calculators and a radiative transfer code and found reasonable agreements for the output. As a demonstration, we analyzed the high-dispersion spectrum of a nearby brown dwarf, Luhman 16 A, and found that a model including water, carbon monoxide, and H2/He collision-induced absorption was well fitted to the observed spectrum (R = 105 and 2.28-2.30 μm). As a result, we found that T0=1295-32+35 K at 1 bar and C/O = 0.62 ± 0.03, which is slightly higher than the solar value. This work demonstrates the potential of a full Bayesian analysis of brown dwarfs and exoplanets as observed by high-dispersion spectrographs and also directly imaged exoplanets as observed by high-dispersion coronagraphy.

Numerical simulations of Greenland and Antarctic ice sheets involve the solution of large-scale highly nonlinear systems of equations on complex shallow geometries. This work is concerned with the construction of Schwarz preconditioners for the solution of the associated tangent problems, which are challenging for solvers mainly because of the strong anisotropy of the meshes and wildly changing boundary conditions that can lead to poorly constrained problems on large portions of the domain. Here, two-level generalized Dryja-Smith-Widlund (GDSW)-type Schwarz preconditioners are applied to different land ice problems, i.e., a velocity problem, a temperature problem, as well as the coupling of the former two problems. We employ the message passing interface (MPI)- parallel implementation of multilevel Schwarz preconditioners provided by the package FROSch (fast and robust Schwarz) from the Trilinos library. The strength of the proposed preconditioner is that it yields out-of-the-box scalable and robust preconditioners for the single physics problems. To the best of our knowledge, this is the first time two-level Schwarz preconditioners have been applied to the ice sheet problem and a scalable preconditioner has been used for the coupled problem. The preconditioner for the coupled problem differs from previous monolithic GDSW preconditioners in the sense that decoupled extension operators are used to compute the values in the interior of the subdomains. Several approaches for improving the performance, such as reuse strategies and shared memory OpenMP parallelization, are explored as well. In our numerical study we target both uniform meshes of varying resolution for the Antarctic ice sheet as well as nonuniform meshes for the Greenland ice sheet. We present several weak and strong scaling studies confirming the robustness of the approach and the parallel scalability of the FROSch implementation. Among the highlights of the numerical results are a weak scaling study for up to 32 K processor cores (8 K MPI ranks and 4 OpenMP threads) and 566 M degrees of freedom for the velocity problem as well as a strong scaling study for up to 4 K processor cores (and MPI ranks) and 68 M degrees of freedom for the coupled problem.

This paper presents Energy Storage-based Packetized Delivery of Electricity (ES-PDE) that is radically different from the operation of today's grid. Under ES-PDE, loads are powered by energy storage systems (ESS) most of the time and only receive packets of electricity periodically to power themselves and charge their ESSs. Therefore, grid operators can schedule the delivery of electricity in a manner that utilizes existing grid infrastructure. Since customers are powered by the co-located ESSs, when grid outages occur, they can be self-powered for some time before the grid is fully restored.In this paper, two operating schemes for ES-PDE are proposed. A Mixed-Integer-Linear-Programming (MILP) optimization is developed to find the optimal packet delivery schedule for each operating scheme. A case study is conducted to demonstrate the operation of ES-PDE.

Given a graph, finding the distance-2 maximal independent set (MIS-2) of the vertices is a problem that is useful in several contexts such as algebraic multigrid coarsening or multilevel graph partitioning. Such multilevel methods rely on finding the independent vertices so they can be used as seeds for aggregation in a multilevel scheme. We present a parallel MIS-2 algorithm to improve performance on modern accelerator hardware. This algorithm is implemented using the Kokkos programming model to enable performance portability. We demonstrate the portability of the algorithm and the performance on a variety of architectures (x86/ARM CPUs and NVIDIA/AMD GPUs). The resulting algorithm is also deterministic, producing an identical result for a given input across all of these platforms. The new MIS-2 implementation outperforms implementations in state of the art libraries like CUSP and ViennaCL by 3-8x while producing similar quality results. We further demonstrate the benefits of this approach by developing parallel graph coarsening scheme for two different use cases. First, we develop an algebraic multigrid (AMG) aggregation scheme using parallel MIS-2 and demonstrate the benefits as opposed to previous approaches used in the MueLu multigrid package in Trilinos. We also describe an approach for implementing a parallel multicolor 'cluster' Gauss-Seidel preconditioner using this MIS-2 coarsening, and demonstrate better performance with an efficient, parallel, mul-ticolor Gauss-Seidel algorithm.

The paper proposes an implementation of Graph Neural Networks (GNNs) for distribution power system Traveling Wave (TW) - based protection schemes. Simulated faults on the IEEE 34 system are processed by using the Karrenbauer Transform and the Stationary Wavelet Transform (SWT), and the energy of the resulting signals is calculated using the Parseval's Energy Theorem. This data is used to train Graph Convolutional Networks (GCNs) to perform fault zone location. Several levels of measurement noise are considered for comparison. The results show outstanding performance, more than 90% for the most developed models, and outline a fast, reliable, asynchronous and distributed protection scheme for distribution level networks.

This work explores deriving transmissibility functions for a missile from a measured location at the base of the fairing to a desired location within the payload. A pressure on the outside of the fairing and the rocket motor’s excitation creates an acceleration at a measured location and a desired location. Typically, the desired location is not measured. In fact, it is typical that the payload may change, but measured acceleration at the base of the fairing is generally similar to previous test flights. Given this knowledge, it is desired to use a finite-element model to create a transmissibility function which relates acceleration from the previous test flight’s measured location at the base of the fairing to acceleration at a location in the new payload. Four methods are explored for deriving this transmissibility, with the goal of finding an appropriate transmissibility when both the pressure and rocket motor excitation are equally present. These methods are assessed using transient results from a simple example problem, and it is found that one of the methods gives good agreement with the transient results for the full range of loads considered.

Numerous projects are looking into distributing blends of natural gas and different amounts of gaseous hydrogen through the existing natural gas distribution system, which is widely composed of medium density polyethylene (MDPE) line pipes. The mechanical behavior of MDPE with hydrogen is not well understood; therefore, the effect of gaseous H2 on the mechanical properties of MDPE needs to be examined. In the current study, we investigate the effects of gaseous H2 on fatigue life and fracture resistance of MDPE in the presence of 3.4 MPa gaseous H2. Fatigue life tests were also conducted at a pressure of 21 MPa to investigate the effect of gas pressure on the fatigue behavior of MDPE. Results showed that the presence of gaseous H2 did not degrade the fatigue life nor the fracture resistance of MDPE. Additionally, based on the value of fracture resistance calculated, a failure assessment diagram was constructed to determine the applicability of using MDPE pipeline for distribution of gaseous H2. Even in the presence of a large internal crack, the failure assessment evaluation indicated that the MDPE pipes lie within the safe region under typical service conditions of natural gas distribution pipeline system.

Hyperspectral Computed Tomography (HCT) Data is often visualized using dimension reduction algorithms. However, these methods often fail to adequately differentiate between materials with similar spectral signatures. Previous work showed that a combination of image preprocessing, clustering, and dimension reduction techniques can be used to colorize simulated HCT data and enhance the contrast between similar materials. In this work, we evaluate the efficacy of these existing methods on experimental HCT data and propose new improvements to the robustness of these methods. We introduce an automated channel selection method and compare the Feldkamp, Davis, and Kress filtered back-projection (FBP) algorithm with the maximum-likelihood estimation-maximization (MLEM) algorithm in terms of HCT reconstruction image quality and its effect on different colorization methods. Additionally, we propose adaptations to the colorization process that eliminate the need for a priori knowledge of the number distinct materials for material classification. Our results show that these methods generalize to materials in real-world experimental HCT data for both colorization and classification tasks; both tasks have applications in industry, medicine, and security, wherever rapid visualization and identification is needed.

Soft error rates (SER) are characterized for the 5-nm bulk FinFET D flip-flops for alpha particles, thermal neutrons, and high-energy neutrons as a function of supply voltage. At nominal operating voltage, the 5-nm node has higher SER than the 7-nm node for all three particle types, with increases of 148%, 168%, and 26%, respectively. The overall SER for the 5-nm node was ~2X greater than that of the 7-nm node, because the reduction in critical charge was higher than that in collected charge. For alpha particle exposures, temperature effects on SER were more prominent for the 5-nm node than both the 7-nm and 16-nm node. Relative contribution of alpha particle SER increases with scaling, and it accounts for 13% of the overall SER at the 5-nm node.

Scalable coherent control hardware for quantum information platforms is rapidly growing in priority as their number of available qubits continues to increase. As these systems scale, more calibration steps are needed, leading to challenges with system instability as calibrated parameters drift. Moreover, the sheer amount of data required to run circuits with large depth tends to balloon, especially when implementing state-of-the-art dynamical-decoupling gates which require advanced modulation techniques. We present a control system that addresses these challenges for trapped-ion systems, through a combination of novel features that eliminate the need for manual bookkeeping, reduction in data transfer bandwidth requirements via gate compression schemes, and other automated error handling techniques. Moreover, we describe an embedded pulse compiler that applies staged optimization, including compressed intermediate representations of parsed output products, performs in-situ mutation of compressed gate data to support high-level algorithmic feedback to account for drift, and can be run entirely on chip.

There is a need to perform offline anomaly detection in count data streams to simultaneously identify both systemic changes and outliers, simultaneously. We propose a new algorithmic method, called the Anomaly Detection Pipeline, which leverages common statistical process control procedures in a novel way to accomplish this. The method we propose does not require user-defined control or phase I training data, automatically identifying regions of stability for improved parameter estimation to support change point detection. The method does not require data to be normally distributed, and it detects outliers relative to the regimes in which they occur. Our proposed method performs comparably to state-of-the-art change point detection methods, provides additional capabilities, and is extendable to a larger set of possible data streams than known methods.

Measurements of gas-phase pressure and temperature in hypersonic flows are important to understanding fluid–structure interactions on vehicle surfaces, and to develop compressible flow turbulence models. To achieve this measurement capability, femtosecond coherent anti-Stokes Raman scattering (fs CARS) is applied at Sandia National Laboratories’ hypersonic wind tunnel. After excitation of rotational Raman transitions by a broadband femtosecond laser pulse, two probe pulses are used: one at an early time where the collisional environment has largely not affected the Raman coherence, and another at a later time after the collisional environment has led to significant J-dependent dephasing of the Raman coherence. CARS spectra from the early probe are fit for temperature, while the later CARS spectra are fit for pressure. Challenges related to implementing fs CARS in cold-flow hypersonic facilities are discussed. Excessive fs pump energy can lead to flow perturbations. The output of a second-harmonic bandwidth compressor (SHBC) is spectrally filtered using a volume Bragg grating to provide the narrowband ps probe pulses and enable single-shot CARS measurements at 1 kHz. Measurements are demonstrated at temperatures and pressures relevant to cold-flow hypersonic wind tunnels in a low-pressure cryostat with an initial demonstration in the hypersonic wind tunnel.

Effects of gamma and proton irradiation, and of forward bias minority carrier injection, on minority carrier diffusion and photoresponse were investigated for long-wave (LW) and mid-wave (MW) infrared detectors with engineered majoritycarrier barriers. The LWIR detector was a type-II GaSb/InAs strained-layer superlattice pBiBn structure. The MWIR detector was a InAsSb/AlAsSb nBp structure without superlattices. Room temperature gamma irradiations degraded the minority carrier diffusion length of the LWIR structure, and minority carrier injections caused dramatic improvements, though there was little effect from either treatment on photoresponse. For the MWIR detector, effects of room temperature gamma irradiation and injection on minority carrier diffusion and photoresponse were negligible. Subsequently, both types of detectors were subjected to gamma irradiation at 77 K. In-situ photoresponse was unchanged for the LWIR detectors, while that for the MWIR ones decreased 19% after cumulative dose of ~500 krad(Si). Minority carrier injection had no effect on photoresponse for either. The LWIR detector was then subjected to 4 Mrad(Si) of 30 MeV proton irradiation at 77 K, and showed a 35% decrease in photoresponse, but again no effect from forward bias injection. These results suggest that photoresponse of the LWIR detectors is not limited by minority carrier diffusion.

The application of traveling wave principles for fault detection in distribution systems is challenging because of multiple reflections from the laterals and other lumped elements, particularly when we consider communication-free applications. We propose and explore the use of Shapelets to characterize fault signatures and a data-driven machine learning model to accurately classify the faults based on their distance. Studies of a simple 5-bus system suggest that the use of Shapelets for detecting faults is promising. The application to practical three-phase distribution feeders is the subject of continuing research.

A critical parameter for the well integrity in geothermal storage and production wells subjected to frequent thermal cycling is the interface between the steel and cement. In geothermal energy storage and energy production wells an insulating cement sheath is necessary to minimize heat losses through the heat uptake by cooler rock formations with high thermal conductivity. Also critical parameters for the well integrity in geothermal storage and production wells subjected to frequent thermal cycling is the interface between metal casing and cement composite. A team from Sandia and Brookhaven National Labs is evaluating special cement formulations to facilitate use during severe and repeated thermal cycling in geothermal wells; this paper reports on recent finding using these more recently developed cements. For this portion of the laboratory study we report on preliminary results from subjecting this cement to high temperature (T> 200°C), at a confining pressure of 13.8 MPa, and pore water pressure of 10.4 MPa. Building on previous work, we studied two sample types; solid cement and a steel cylinder sheathed with cement. In the first sample type we measured fluid flow at increasing elevated temperatures and pressure. In the second sample type, we flowed water through the inside of the steel cylinder rapidly to develop an inner to outer thermal gradient using this specialized test geometry. In the paper we report on water permeability estimates at elevated temperatures and the results of rapid thermal cycling of a steel/cement interface. Posttest observations of the steel-cement interface reveal insight into the nature of the steel/cement bond.

Despite their susceptibility to hydrogen-assisted fracture, ferritic steels make up a large portion of the hydrogen infrastructure. It is impractical and too costly to build large scale components such as pipelines and pressure vessels out of more hydrogen-resistant materials such as austenitic stainless steels. Therefore, it is necessary to understand the fracture behavior of ferritic steels in high-pressure hydrogen environments to manage design margins and reduce costs. Quenched and tempered (Q&T) martensite is the predominant microstructure of high-pressure hydrogen pressure vessels, and higher strength grades of this steel type are more susceptible to hydrogen degradation than lower strength grades. In this study, a single heat of 4340 alloy was heat treated to develop alternative microstructures for evaluation of fracture resistance in hydrogen gas. Fracture tests of several microstructures, such as lower bainite and upper bainite with similar strength to the baseline Q&T martensite, were tested at 21 and 105 MPa H2. Despite a higher MnS inclusion content in the tested 4340 alloy which reduced the fracture toughness in air, the fracture behavior in hydrogen gas fit a similar trend to other previously tested Q&T martensitic steels. The lower bainite microstructure performed similar to the Q&T martensite, whereas the upper bainite microstructure performed slightly worse. In this paper, we extend the range of high-strength microstructures evaluated for hydrogen-assisted fracture beyond conventional Q&T martensitic steels.

In high temperature (HT) environments often encountered in geothermal wells, data rate transfers for downhole instrumentation are relatively limited due to transmission line bandwidth and insertion loss and the processing speed of HT microcontrollers. In previous research, Sandia National Laboratory Geothermal Department obtained 3.8 Mbps data rates over 1524 m (5000 ft) for single conductor wireline cable with less than a 1x10^-8 bit error rate utilizing low temperature NI^TM hardware (formerly National Instruments^TM). Our protocol technique was a combination of orthogonal frequency-division multiplexing and quadrature amplitude modulation across the bandwidth of the single conductor wireline. This showed it is possible to obtain high data rates in low bandwidth wirelines. This paper focuses on commercial HT microcontrollers (µC), rather than low temperature NI^TM modules, to enable high-speed communication in an HT environment. As part of this effort, four devices were evaluated, and an optimal device (SM320F28335-HT) was selected for its high clock rates, floating-point unit, and on-board analog-to-digital converter. A printed circuit board was assembled with the HT µC, an HT resistor digital-to-analog converter, and an HT line driver. The board was tested at the microcontroller's rated maximum temperature (210°C) for a week while transmitting through a 1524 m (5000 ft) wireline. A final test was conducted to the point of failure at elevated temperatures. This paper will discuss communication methods, achieved data rates, and hardware selection. This effort contributes to the enhancement of HT instrumentation by enabling greater sensor counts and improving data accuracy and transfer rates.

As transistors have been scaled over the past decade, modern systems have become increasingly susceptible to faults. Increased transistor densities and lower capacitances make a particle strike more likely to cause an upset. At the same time, complex computer systems are increasingly integrated into safety-critical systems such as autonomous vehicles. These two trends make the study of system reliability and fault tolerance essential for modern systems. To analyze and improve system reliability early in the design process, new tools are needed for RTL fault analysis.This paper proposes Eris, a novel framework to identify vulnerable components in hardware designs through fault-injection and fault propagation tracking. Eris builds on ESSENT - a fast C/C++ RTL simulation framework - to provide fault injection, fault tracking, and control-flow deviation detection capabilities for RTL designs. To demonstrate Eris' capabilities, we analyze the reliability of the open source Rocket Chip SoC by randomly injecting faults during thousands of runs on four microbenchmarks. As part of this analysis we measure the sensitivity of different hardware structures to faults based on the likelihood of a random fault causing silent data corruption, unrecoverable data errors, program crashes, and program hangs. We detect control flow deviations and determine whether or not they are benign. Additionally, using Eris' novel fault-tracking capabilities we are able to find 78% more vulnerable components in the same number of simulations compared to RTL-based fault injection techniques without these capabilities. We will release Eris as an open-source tool to aid future research into processor reliability and hardening.

The goal of this work is to identify critical nodes in a bulk electric system for grid resilience to a specified threat. We present a cascading outage framework and an analytical framework for identifying electric grid failure trends and critical components. We create thousands of threat scenarios to be modeled in a dynamic electric grid cascading outage model. Each threat scenario determines which major grid components are removed from service due to the threat. The cascading outage model runs transient dynamic simulations which allow for secondary transients to affect the relays/protection leading to cascading outages. The results of the cascading model feed an analytics model to identify trends and critical components whose failure is more likely to cause serious systemic effects. Information on which system components are most critical to electric grid resilience can significantly assist grid planning and reduce grid consequences of large-scale disasters.

Abstract not provided.

Dynamic injection shift factor (DISF) is the linear sensitivity factor that estimates the incremental line flows in a transmission network subject to load disturbances. The DISF provides fast computation of post-disturbance line flows without solving nonlinear equations of power-system dynamics for a given pre-disturbance operating condition. Furthermore, DISF can be utilized to derive other critical sensitivity factors used for fast contingency screening and generation dispatch in real-time markets. However, deriving the DISF analytically is difficult due to nonlinearity of power-system models. In this paper, we propose an approach based on a linear Koopman operator and a data-driven algorithm to construct a representative linear model for generator and network dynamics. The linear model constructed by the proposed approach is utilized to find an analytic expression of the DISF. Then, the DISF provides numerical tools to estimate line flows accurately subject to power injection changes in the network at any instant in time without solving nonlinear power-system equations.

We present a new strategy for automatically exploring the design space of key CUDA + MPI programs and providing design rules that discriminate slow from fast implementations. In such programs, the order of operations (e.g., G PU kernels, MPI communication) and assignment of operations to resources (e.g., G PU streams) makes the space of possible designs enormous. Systems experts have the task of redesigning and reoptimizing these programs to effectively utilize each new platform. This work provides a prototype tool to reduce that burden. In our approach, a directed acyclic graph of CUDA and MPI operations defines the design space for the program. Monte-Carlo tree search discovers regions of the design space that have large impact on the program's performance. A sequence-to-vector transformation defines features for each explored im-plementation, and each implementation is assigned a class label according to its relative performance. A decision tree is trained on the features and labels to produce design rules for each class; these rules can be used by systems experts to guide their implementations. We demonstrate our strategy using a key kernel from scientific computing - sparse-matrix vector multiplication - on a platform with multiple MPI ranks and GPU streams.

In the summer of 2020, the National Aeronautics and Space Administration (NASA) launched a spacecraft as part of the Mars 2020 mission. The rover on the spacecraft uses a Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) to provide continuous electrical and thermal power for the mission. The MMRTG uses radioactive plutonium dioxide. NASA prepared a Supplemental Environmental Impact Statement (SEIS) for the mission in accordance with the National Environmental Policy Act. The SEIS provides information related to updates to the potential environmental impacts associated with the Mars 2020 mission as outlined in the Final Environmental Impact Statement (FEIS) for the Mars 2020 Mission issued in 2014 and associated Record of Decision (ROD) issued in January 2015. The Nuclear Risk Assessment (NRA) 2019 Update includes new and updated Mars 2020 mission information since the publication of the 2014 FEIS and the updates to the Launch Approval Process with the issuance of Presidential Memorandum on Launch of Spacecraft Containing Space Nuclear Systems, National Security Presidential Memorandum 20 (NSPM-20). The NRA 2019 Update addresses the responses of the MMRTG to potential accident and abort conditions during the launch opportunity for the Mars 2020 mission and the associated consequences. This information provides the technical basis for the radiological risks discussed in the SEIS. This paper provides a summary of the methods and results used in the NRA 2019 Update.

Quantifying gas-surface interactions for hypersonic reentry applications remains a challenging and complex problem where credible models are needed to design and analyze thermal protection systems. A flexible sensitivity analysis approach is demonstrated to analyze finite-rate ablation models to identify reaction parameters and mechanisms of influence on predicted quantities of interest. Simulations of hypersonic flow over a sphere-cone are presented using parameterized Park, Zhluktov and Abe (ZA), and MURI finite-rate models that describe the oxidation and sublimation of carbon. The results presented in this study emphasize the importance of characterizing model inputs that are shown to have a high impact on predicted quantities and build evidence to assess credibility of these models.

Investigations of mechanical shear driven organic film formation, or tribofilms, on catalytic metal surfaces in sliding electrical contacts date back to Hermance and Egan's seminal work on mated palladium contacts. In this report we describe investigations of tribofilm formation from outgassing epoxy vapors, consisting of multiple siloxane species, and from isolated constituent species including octamethyltrisiloxane (OMTS). Experiments performed in varying vapor concentrations of OMTS resulted in the formation of tribopolymer films with similar morphology and impact on electrical contact resistance (ECR) as previously published results of sliding electrical contacts in similar conditions submerged in higher molecular weight polymethyldisiloxane (PDMS) fluid. Infrared (IR) spectroscopy was used to confirm the characteristic signatures of siloxanes and silanes in tribopolymer deposits found in wear scars formed in OMTS. Comparisons to prior studies also showed that the films formed from outgassing epoxy vapor constituents (including OMTS and a multitude of other species) have similar characteristics to the silicon-carbon-oxygen (Si-C-O) films previously found to form in high molecular weight PDMS fluid-filled devices. Tribopolymer formation was demonstrated for a range of electrical contact alloy mated pairs (Paliney-7, Neyoro-G, NiPtRe). Experiments in increasing concentrations of OMTS vapor showed that a persistent tribofilm is rapidly formed under cyclic sliding contact shear that can interrupt electrical current, with a formation rate that increases with increasing concentration. Overall, this work demonstrates the ease with which trace organics can promote the formation of insulating tribopolymer films in electrical contacts and factors that can influence their growth.

Frequent changes in penetration levels of distributed energy resources (DERs) and grid control objectives have caused the maintenance of accurate and reliable grid models for behind-the-meter (BTM) photovoltaic (PV) system impact studies to become an increasingly challenging task. At the same time, high adoption rates of advanced metering infrastructure (AMI) devices have improved load modeling techniques and have enabled the application of machine learning algorithms to a wide variety of model calibration tasks. Therefore, we propose that these algorithms can be applied to improve the quality of the input data and grid models used for PV impact studies. In this paper, these potential improvements were assessed for their ability to improve the accuracy of locational BTM PV hosting capacity analysis (HCA). Specifically, the voltage- and thermal-constrained hosting capacities of every customer location on a distribution feeder (1,379 in total) were calculated every 15 minutes for an entire year before and after each calibration algorithm or load modeling technique was applied. Overall, the HCA results were found to be highly sensitive to the various modeling deficiencies under investigation, illustrating the opportunity for more data-centric/model-free approaches to PV impact studies.

At Sandia National Laboratories, QSCOUT (the Quantum Scientific Computing Open User Testbed) is an ion-trap based quantum computer built for the purpose of allowing users low-level access to quantum hardware. Commands are executed on the hardware using Jaqal (Just Another Quantum Assembly Language), a programming language designed in-house to support the unique capabilities of QSCOUT. In this work, we describe a batching implementation of our custom software that speeds the experimental run-time through the reduction of communication and upload times. Reducing the code upload time during experimental runs improves system performance by mitigating the effects of drift. We demonstrate this implementation through a set of quantum chemistry experiments using a variational quantum eigensolver (VQE). While developed specifically for this testbed, this idea finds application across many similar experimental platforms that seek greater hardware control or reduced overhead.

A self-synchronizing underwater acoustic network, designed for remote monitoring of mooring loads in Wave Energy Converters (WEC), has been developed and tested. This network uses Time Division Multiple Access and operates self-contained with the ability for users to remotely transmit commands to the network as needed. Each node is a self-contained unit, consisting of a protocol adaptor board, an underwater acoustic modem and a battery pack. A node can be connected to a load cell, to a topside user or to the WEC. Every node is swapable. The protocol adaptor board, named Protocol Adaptor for Digital LOad Cell (PADLOC) supports a variety of digital load cell message formats (CAN, MODBUS, custom ASCII) and underwater acoustic modem serial formats. PADLOC enables topside users to connect to separate load cells through a user-specific command.

The III-nitride semiconductors are attractive for on-chip, solid-state vacuum nanoelectronics, having high thermal and chemical stability, low electron affinity, and high breakdown fields. Here we report top-down fabricated, lateral gallium nitride (GaN)-based nanoscale vacuum electron diodes operable in air, with ultra-low turn-on voltages down to ~0.24 V, and stable high field emission currents, tested up to several microamps for single-emitter devices. We present gap-size and pressure dependent studies which provide insights into the design of future nanogap vacuum electron devices. The vacuum nanodiodes also show high resistance to damage from 2.5 MeV proton exposure. Preliminary results on the fabrication and characteristics of lateral GaN nano vacuum transistors will also be presented. The results show promise for a new class of robust, integrated, III-nitride based vacuum nanoelectronics.

Substantial decreases in the cost of solar and energy storage systems create suitable conditions for implementing microgrids that operate independently from the main transmission/distribution grids. Such microgrids concept is particularly of interest for islanded and remote communities, which oftentimes rely on expensive energy resources to supply their demand. This paper presents the design of a microgrid for an island community, in which transmission infrastructure (an aging subsea cable that connects to the mainland grid) is replaced by solar and energy storage systems. Based on historical demand data and solar generation forecasts, an optimization framework is proposed to determine sizes of the microgrid components such that the local generation resources are self-sufficient and reliable. Results of this analysis show that, indeed, solar and energy storage systems are viable choices for implementing a microgrid and replacing transmission infrastructure.

We develop methods that could be used to qualify a training dataset and a data-driven turbulence closure trained on it. By qualify, we mean identify the kind of turbulent physics that could be simulated by the data-driven closure. We limit ourselves to closures for the Reynolds-Averaged Navier Stokes (RANS) equations. We build on our previous work on assembling feature-spaces, clustering and characterizing Direct Numerical Simulation datasets that are typically pooled to constitute training datasets. In this paper, we develop an alternative way to assemble feature-spaces and thus check the correctness and completeness of our previous method. We then use the characterization of our training dataset to identify if a data-driven turbulence closure learned on it would generalize to an unseen flow configuration – an impinging jet in our case. Finally, we train a RANS closure architected as a neural network, and develop an explanation i.e., an interpretable approximation, using generalized linear mixed-effects models and check whether the explanation resembles a contemporary closure from turbulence modeling.

The emerging use of the physics-based athermal recombination-corrected displacement per atom (arc-dpa) model for the displacement damage efficiency has motivated a re-evaluation of the historical empirically-derived GaAs damage response function with the purpose of highlighting needs for future analytical and experimental work. The 1-MeV neutron damage equivalence methodology used in the ASTM E-722 standard for GaAs has been re-evaluated using updated nuclear data. This yielded a higher fidelity representation of the GaAs displacement kerma and, through the use of the refined PKA recoil energy-dependent damage efficiency model, an updated 1-MeV(GaAs) displacement damage function. This re-evaluation included use of the Norgett-Robinson-Torrens (NRT) model for an updated threshold treatment, rather than the sharp-threshold Kinchin-Pease model used in the current ASTM standard. The underlying nuclear data evaluations have been updated to use the ENDF/VIII.0 ⁷⁵As and TENDL-2019 ⁷¹Ga/⁶⁹Ga evaluations. The displacement kerma and 1-MeV-equivalent damage responses were calculated using a modified NJOY-2016 code which allowed for refinements in some of the damage models. This paper shows that an updated displacement damage function, based upon the latest nuclear data, is consistent with the experimental data used to develop the current ASTM E-722 GaAs standard. Using a double ratio approach to compare the available experimental data with the calculated response, the average legacy double ratio was found to be 0.97±0.05 and the average updated double ratio was found to be 0.94 ±0.05.

Pulse power loads are becoming increasingly more common in many applications primarily due to applications like radar, lasers, and the technologies such as EMALS (ElectroMagnetic Aircraft Launch Systems) on next-generation aircraft carriers. Pulse power loads are notorious for causing stability issues. Stability for pulse power loads can be defined as metastable, where the system can be unstable for a portion of the pulse as long as the stability is re-established over the entire pulse. Dynamic characteristics for step changes in load can be improved with a modified boost converter topology in conjunction with bang-bang control. Improvement in the metastability margins will be presented through simulations with the application of the modified topology to pulse power loads.

A 0.2-2 GHz digitally programmable RF delay element based on a time-interleaved multi-stage switched-capacitor (TIMS-SC) approach is presented. The proposed approach enables hundreds of ns of broadband RF delay by employing sample time expansion in multiple stages of switched-capacitor storage elements. The delay element was implemented in a 45 nm SOI CMOS process and achieves a 2.55-448.6 ns programmable delay range with < 0.12% delay variation across 1.8 GHz of bandwidth at maximum delay, 2.42 ns programmable delay steps, and 330 ns/mm2 area efficiency. The device achieves 24 dB gain, 7.1 dB noise figure, and consumes 80 mW from a 1 V supply with an active area of 1.36 mm2.

Modern distribution systems can accommodate different topologies through controllable tie lines for increasing the reliability of the system. Estimating the prevailing circuit topology or configuration is of particular importance at the substation for different applications to properly operate and control the distribution system. One of the applications of circuit configuration estimation is adaptive protection. An adaptive protection system relies on the communication system infrastructure to identify the latest status of power. However, when the communication links to some of the equipment are outaged, the adaptive protection system may lose its awareness over the status of the system. Therefore, it is necessary to estimate the circuit status using the available healthy communicated data. This paper proposes the use of machine learning algorithms at the substation to estimate circuit configuration when the communication to the tie breakers is compromised. Doing so, the adaptive protection system can identify the correct protection settings corresponding to the estimated circuit topology. The effectiveness of the proposed approach is verified on IEEE 123 bus test system.

Abstract not provided.

This manuscript presents the recent advances in Mixed-Integer Nonlinear Programming (MINLP) and Generalized Disjunctive Programming (GDP) with a particular scope for superstructure optimization within Process Systems Engineering (PSE). We present an environment of open-source software packages written in Python and based on the algebraic modeling language Pyomo. These packages include MindtPy, a solver for MINLP that implements decomposition algorithms for such problems, CORAMIN, a toolset for MINLP algorithms providing relaxation generators for nonlinear constraints, Pyomo.GDP, a modeling extension for Generalized Disjunctive Programming that allows users to represent their problem as a GDP natively, and GDPOpt, a collection of algorithms explicitly tailored for GDP problems. Combining these tools has allowed us to solve several problems relevant to PSE, which we have gathered in an easily installable and accessible library, GDPLib. We show two examples of these models and how the flexibility of modeling given by Pyomo.GDP allows for efficient solutions to these complex optimization problems. Finally, we show an example of integrating these tools with the framework IDAES PSE, leading to optimal process synthesis and conceptual design with advanced multi-scale PSE modeling systems.

Stochasticity is ubiquitous in the world around us. However, our predominant computing paradigm is deterministic. Random number generation (RNG) can be a computationally inefficient operation in this system especially for larger workloads. Our work leverages the underlying physics of emerging devices to develop probabilistic neural circuits for RNGs from a given distribution. However, codesign for novel circuits and systems that leverage inherent device stochasticity is a hard problem. This is mostly due to the large design space and complexity of doing so. It requires concurrent input from multiple areas in the design stack from algorithms, architectures, circuits, to devices. In this paper, we present examples of optimal circuits developed leveraging AI-enhanced codesign techniques using constraints from emerging devices and algorithms. Our AI-enhanced codesign approach accelerated design and enabled interactions between experts from different areas of the micro-electronics design stack including theory, algorithms, circuits, and devices. We demonstrate optimal probabilistic neural circuits using magnetic tunnel junction and tunnel diode devices that generate an RNG from a given distribution.

Plasma-based thermionic energy converters (TECs) feature non-equilibrium processes that are best modeled using fully kinetic simulations, and pose challenges in terms of length scales, time scales, and complex particle interactions. We present simulations of TECs using two particle-in-cell software packages which use modern high-performance computing to meet the simulation challenges. Using WarpX, we demonstrate the simulation of a triode plasma TEC. Using Aleph, we present simulations of an ignited cesium plasma TEC, including a large set of multi-step ionization processes. The Cs plasma simulations also demonstrate shortcomings of approximate models used historically.

We propose the use of balanced iterative reducing and clustering using hierarchies (BIRCH) combined with linear regression to predict the reduced Young's modulus and hardness of highly heterogeneous materials from a set of nanoindentation experiments. We first use BIRCH to cluster the dataset according to its mineral compositions, which are derived from the spectral matching of energy-dispersive spectroscopy data through the modular automated processing system (MAPS) platform. We observe that grouping our dataset into five clusters yields the best accuracy as well as a reasonable representation of mineralogy in each cluster. Subsequently, we test four types of regression models, namely linear regression, support vector regression, Gaussian process regression, and extreme gradient boosting regression. The linear regression and Gaussian process regression provide the most accurate prediction, and the proposed framework yields R² = 0.93 for the test set. Although the study is needed more comprehensively, our results shows that machine learning methods such as linear regression or Gaussian process regression can be used to accurately estimate mechanical properties with a proper number of grouping based on compositional data.

Iterative methods for solving linear systems serve as a basic building block for computational science. The computational cost of these methods can be significantly influenced by the round-off errors that accumulate as a result of their implementation in finite precision. In the extreme case, round-off errors that occur in practice can completely prevent an implementation from satisfying the accuracy and convergence behavior prescribed by its underlying algorithm. In the exascale era where cost is paramount, a thorough and rigorous analysis of the delay of convergence due to round-off should not be ignored. In this paper, we use a small model problem and the Jacobi iterative method to demonstrate how the Coq proof assistant can be used to formally specify the floating-point behavior of iterative methods, and to rigorously prove the accuracy of these methods.

Heat waves are increasing in severity, duration, and frequency, making historical weather patterns insufficient for assessments of building resilience. This work introduces a stochastic weather generator called the multi-scenario extreme weather simulator (MEWS) that produces credible future heat waves. MEWS calculates statistical parameters from historical weather data and then shifts them using climate projections of increasing severity and frequency. MEWS is demonstrated using the EnergyPlus medium office prototype model for climate zone 4B using five climate scenarios to 2060. The results show how changes in climate and heat waves affect electric loads, peak loads, and thermal comfort with uncertainty.

Centered on modern C++ and the SYCL standard for heterogeneous programming, Data Parallel C++ (dpc++) and Intel's oneAPI software ecosystem aim to lower the barrier to entry for the use of accelerators like FPGAs in diverse applications. In this work, we consider the usage of FPGAs for scientific computing, in particular with a multigrid solver, MueLu. We report on early experiences implementing kernels of the solver in DPC++ for execution on Stratix 10 FPGAs, and we evaluate several algorithmic design and implementation choices. These choices not only impact performance, but also shed light on the capabilities and limitations of DPC++ and oneAPI.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Simple but mission-critical internet-based applications that require extremely high reliability, availability, and verifiability (e.g., auditability) could benefit from running on robust public programmable blockchain platforms such as Ethereum. Unfortunately, program code running on such blockchains is normally publicly viewable, rendering these platforms unsuitable for applications requiring strict privacy of application code, data, and results. In this work, we investigate using MPC techniques to protect the privacy of a blockchain computation. While our main goal is to hide both the data and the computed function itself, we also consider the standard MPC setting where the function is public. We describe GABLE (Garbled Autonomous Bots Leveraging Ethereum), a blockchain MPC architecture and system. The GABLE architecture specifies the roles and capabilities of the players. GABLE includes two approaches for implementing MPC over blockchain: Garbled Circuits (GC), evaluating universal circuits, and Garbled Finite State Automata (GFSA). We formally model and prove the security of GABLE implemented over garbling schemes, a popular abstraction of GC and GFSA from (Bellare et al., CCS 2012). We analyze in detail the performance (including Ethereum gas costs) of both approaches and discuss the trade-offs. We implement a simple prototype of GABLE and report on the implementation issues and experience.

This paper presents a type-IV wind turbine generator (WTG) model developed in MATLAB/Simulink. An aerodynamic model is used to improve an electromagnetic transient model. This model is further developed by incorporating a single-mass model of the turbine and including generator torque control from an aerodynamic model. The model is validated using field data collected from an actual WTG located in the Scaled Wind Farm Technology (SWiFT) facility. The model takes the nacelle wind speed as an estimate. To ensure the model and the SWiFT WTG field data is compared accurately, the wind speed is estimated using a Kalman filter. Simulation results shows that using a single-mass model instead of a two-mass model for aerodynamic torque, including the generator torque control from SWiFT, estimating wind speed via the Kalman filter and tunning the synchronous generator, accurately represent the generator torque, speed, and power, compared to the SWiFT WTG field data.

Sedimentary-hosted geothermal energy systems are permeable structural, structural-stratigraphic, and/or stratigraphic horizons with sufficient temperature for direct use and/or electricity generation. Sedimentary-hosted (i.e., stratigraphic) geothermal reservoirs may be present in multiple locations across the central and eastern Great Basin of the USA, thereby constituting a potentially large base of untapped, economically accessible energy resources. Sandia National Laboratories has partnered with a multi-disciplinary group of collaborators to evaluate a stratigraphic system in Steptoe Valley, Nevada using both established and novel geophysical imaging techniques. The goal of this study is to inform an optimized strategy for subsequent exploration and development of this and analogous resources. Building from prior Nevada Play Fairway Analysis (PFA), this team is primarily 1) collecting additional geophysical data, 2) employing novel joint geophysical inversion/modeling techniques to update existing 3D geologic models, and 3) integrating the geophysical results to produce a working, geologically constrained thermo-hydrological reservoir model. Prior PFA work highlights Steptoe Valley as a favorable resource basin that likely has both sedimentary and hydrothermal characteristics. However, there remains significant uncertainty on the nature and architecture of the resource(s) at depth, which increases the risk in exploratory drilling. Newly acquired gravity, magnetic, magnetotelluric, and controlled-source electromagnetic data, in conjunction with new and preceding geoscientific measurements and observations, are being integrated and evaluated in this study for efficacy in understanding stratigraphic geothermal resources and mitigating exploration risk. Furthermore, the influence of hydrothermal activity on sedimentary-hosted reservoirs in favorable structural settings (i.e., whether fault-controlled systems may locally enhance temperature and permeability in some deep stratigraphic reservoirs) will also be evaluated. This paper provides details and current updates on the course of this study in-progress.

Community, corporate, and government organizations are being targeted by disinformation attacks at an unprecedented rate. These attacks interrupt the ability of organizations to make high-consequence decisions and can lower their confidence in datasets and analytics. New interdisciplinary research approaches are being actively developed to expand resilience theory applications to organizations, and to determine the metrics and mitigations needed to increase resilience against disinformation. This paper presents initial ideas on adapting resilience methodologies for organizations and disinformation, highlighting key areas that require further exploration in this emerging field of research.

Geographic analysis of photovoltaic (PV) performance factors across large regions can help relevant stakeholders make informed, and reduced risk decisions. High temporal and spatial resolution meteorological data from the National Solar Radiation Database are used to investigate performance and cost as an effect of varying system characteristics such as the module temperature coefficients, mounting configurations and coatings. The results demonstrated the strong climatic dependence that these characteristics have on annual energy yield whereas the revenues were dominated by the electricity price.

Injecting CO2 into a deep geological formation (i.e., geological carbon storage, GCS) can induce earthquakes along preexisting faults in the earth's upper crust. Seismic survey and regional geo-structure analysis are typically employed to map the faults prone to earthquakes prior to injection. However, earthquakes induced by fluid injection from other subsurface energy storage and recovery activities show that systematic evaluation of the potential of induced seismicity associated with GCS is necessary. This study mechanistically investigates how multiphysical interaction among injected CO2, preexisting pore fluids and rock matrix alters stress states on faults and which physical mechanisms can nucleate earthquakes along the faults. Increased injection pressure is needed to overcome capillary entry pressure of the fault zone, driven by the contrast of fluids' wetting characteristics. Accumulated CO2 within the reservoir delays post shut-in reduction in pressure and stress fields along the fault that may enhance the potential for earthquake nucleation after terminating injection operations. Elastic energy generated by coupled processes transfers to low-permeability or hydraulically isolated basement faults, which can initiate slip of the faults. Our findings from generic studies suggest that geomechanical simulations integrated with multiphase flow system are essential to detect deformation-driven signals and mitigate potential seismic hazards associated with CO2 injection.

Abstract not provided.

We evaluate the use of reference modules for monitoring effective irradiance in PV power plants, as compared with traditional plane-of-array (POA) irradiance sensors, for PV monitoring and capacity tests. Common POA sensors such as pyranometers and reference cells are unable to capture module-level irradiance nonuniformity and require several correction factors to accurately represent the conditions for fielded modules. These problems are compounded for bifacial systems, where the power loss due to rear side shading and rear-side plane-of-array (RPOA) irradiance gradients are greater and more difficult to quantify. The resulting inaccuracy can have costly real-world consequences, particularly when the data are used to perform power ratings and capacity tests. Here we analyze data from a bifacial single-axis tracking PV power plant, (175.6 MWdc) using 5 meteorological (MET) stations, located on corresponding inverter blocks with capacities over 4 MWdc. Each MET station consists of bifacial reference modules as well pyranometers mounted in traditional POA and RPOA installations across the PV power plant. Short circuit current measurements of the reference modules are converted to effective irradiance with temperature correction and scaling based on flash test or nameplate short circuit values. Our work shows that bifacial effective irradiance measured by pyranometers averages 3.6% higher than the effective irradiance measured by bifacial reference modules, even when accounting for spectral, angle of incidence, and irradiance nonuniformity. We also performed capacity tests using effective irradiance measured by pyranometers and reference modules for each of the 5 bifacial single-axis tracking inverter blocks mentioned above. These capacity tests evaluated bifacial plant performance at ∼3.9% lower when using bifacial effective irradiance from pyranometers as compared to the same calculation performed with reference modules.

Software sustainability is critical for Computational Science and Engineering (CSE) software. Measuring sustainability is challenging because sustainability consists of many attributes. One factor that impacts software sustainability is the complexity of the source code. This paper introduces an approach for utilizing complexity data, with a focus on hotspots of and changes in complexity, to assist developers in performing code reviews and inform project teams about longer-term changes in sustainability and maintainability from the perspective of cyclomatic complexity. We present an analysis of data associated with four real-world pull requests to demonstrate how the metrics may help guide and inform the code review process and how the data can be used to measure changes in complexity over time.

Remote assessment of physiological parameters has enabled patient diagnostics without the need for a medical professional to become exposed to potential communicable diseases. In particular, early detection of oxygen saturation, abnormal body temperature, heart rate, and/or blood pressure could affect treatment protocols. The modeling effort in this work uses an adding-doubling radiative transfer model of a seven-layer human skin structure to describe absorption and reflection of incident light within each layer. The model was validated using both abiotic and biotic systems to understand light interactions associated with surfaces consisting of complex topography as well as multiple illumination sources. Using literature-based property values for human skin thickness, absorption, and scattering, an average deviation of 7.7% between model prediction and experimental reflectivity was observed in the wavelength range of 500-1000 nm.

This paper presents the formulation, implementation, and demonstration of a new, largely phenomenological, model for the damage-free (micro-crack-free) thermomechanical behavior of rock salt. Unlike most salt constitutive models, the new model includes both drag stress (isotropic) and back stress (kinematic) hardening. The implementation utilizes a semi-implicit scheme and a fall-back fully-implicit scheme to numerically integrate the model's differential equations. Particular attention was paid to the initial guesses for the fully-implicit scheme. Of the four guesses investigated, an initial guess that interpolated between the previous converged state and the fully saturated hardening state had the best performance. The numerical implementation was then used in simulations that highlighted the difference between drag stress hardening versus combined drag and back stress hardening. Simulations of multi-stage constant stress tests showed that only combined hardening could qualitatively represent reverse (inverse transient) creep, as well as the large transient strains experimentally observed upon switching from axisymmetric compression to axisymmetric extension. Simulations of a gas storage cavern subjected to high and low gas pressure cycles showed that combined hardening led to substantially greater volume loss over time than drag stress hardening alone.

Software is ubiquitous in society, but understanding it, especially without access to source code, is both non-trivial and critical to security. A specialized group of cyber defenders conducts reverse engineering (RE) to analyze software. The expertise-driven process of software RE is not well understood, especially from the perspective of workflows and automated tools. We conducted a task analysis to explore the cognitive processes that analysts follow when using static techniques on binary code. Experienced analysts were asked to statically find a vulnerability in a small binary that could allow for unverified access to root privileges. Results show a highly iterative process with commonly used cognitive states across participants of varying expertise, but little standardization in process order and structure. A goal-centered analysis offers a different perspective about dominant RE states. We discuss implications about the nature of RE expertise and opportunities for new automation to assist analysts using static techniques.

Deep operator learning has emerged as a promising tool for reduced-order modelling and PDE model discovery. Leveraging the expressive power of deep neural networks, especially in high dimensions, such methods learn the mapping between functional state variables. While proposed methods have assumed noise only in the dependent variables, experimental and numerical data for operator learning typically exhibit noise in the independent variables as well, since both variables represent signals that are subject to measurement error. In regression on scalar data, failure to account for noisy independent variables can lead to biased parameter estimates. With noisy independent variables, linear models fitted via ordinary least squares (OLS) will show attenuation bias, wherein the slope will be underestimated. In this work, we derive an analogue of attenuation bias for linear operator regression with white noise in both the independent and dependent variables, showing that the norm upper bound of the operator learned via OLS decreases with increasing noise in the independent variable. In the nonlinear setting, we computationally demonstrate underprediction of the action of the Burgers operator in the presence of noise in the independent variable. We propose error-in-variables (EiV) models for two operator regression methods, MOR-Physics and DeepONet, and demonstrate that these new models reduce bias in the presence of noisy independent variables for a variety of operator learning problems. Considering the Burgers operator in 1D and 2D, we demonstrate that EiV operator learning robustly recovers operators in high-noise regimes that defeat OLS operator learning. We also introduce an EiV model for time-evolving PDE discovery and show that OLS and EiV perform similarly in learning the Kuramoto-Sivashinsky evolution operator from corrupted data, suggesting that the effect of bias in OLS operator learning depends on the regularity of the target operator.

High strength austenite-ferrite duplex stainless steels are a potential alternative to austenitic stainless steels for components in hydrogen gas storage systems. Since these components experience cyclic loading from frequent pressurization and depressurization, the effect of hydrogen on the fatigue behavior of duplex stainless steel must be understood. To determine the influence of hydrogen on fatigue crack initiation and fatigue life of a 255 super duplex stainless steel, circumferentially notched tensile (CNT) specimens were fatigue tested in the as-received condition in air, with pre-charged internal hydrogen in air, and in the as-received condition in high pressure hydrogen gas. The direct current potential difference (DCPD) method was used to detect crack initiation so that S-N curves could be produced for both (i) cycles to crack initiation and (ii) cycles to failure. An electropolished CNT specimen was also cycled in the as-received and hydrogen pre-charged conditions but interrupted just after crack initiation. The microstructural locations of small fatigue cracks were then identified with scanning electron microscopy and electron backscatter diffraction (EBSD). High pressure hydrogen gas and pre-charged hydrogen decreased the fatigue life of 255 duplex stainless steel by a nearly identical amount. The effects of hydrogen on fatigue crack initiation and fatigue life of 255 duplex stainless steel are discussed and compared to austenitic stainless steels.

Thermal and hydrological behaviors of multiphase pore fluids in the presence of heat cause the near-field thermo-hydro-mechanicalchemical (THMC) coupled processes that can influence performance of geologic radioactive waste repositories. This hydro-thermal impacts may perturb the geomechanical stability of the disturbed rock zone (DRZ) surrounding the drifts in a shale-hosted deep geologic repository, which links heat/fluid flow and chemical/reactive transport between the engineered barrier system (EBS) and the host rock. This work focuses on integrating the effects of a near-field geomechanical process driven by buffer swelling into TH simulations to reduce dimensionality and improve computational efficiency. This geomechanical process can reduce the DRZ permeability, potentially influencing the rate of radionuclide transport and exchange with corrosive species in host rock groundwater that could accelerate waste package degradation. The sensitivity test with variation in host rock permeability indicates that less permeable shale retards re-saturation of the buffer, such that slower increase of swelling pressure delays reduction of DRZ permeability.

The effects of passive pre-chamber (PC) geometry and nozzle pattern as well as the use of either conventional spark or non-equilibrium plasma PC ignition system on knocking events were studied in an optically-accessible single-cylinder gasoline research engine. The equivalence ratio of the charge in the main chamber (MC) was maintained equal to 0.94 at a constant engine speed of 1300 rpm, and at constant engine load of 3.5 bar indicated mean effective pressure for all operating conditions. MC pressure profiles were collected and analyzed to infer the amplitude and the frequency of pressure oscillations that resulted in knocking events. The combustion process in the MC was investigated utilizing high-speed excited methylidyne radical (CH*) chemiluminescence images. The collected results highlighted that PC volume and nozzle pattern substantially affected the knock intensity (KI), while the use of the non-equilibrium plasma ignition system exhibited lower KI compared to PC equipped with a conventional inductive ignition system. It was also identified that knocking events were likely not generated by conventional end gas auto-ignition, but by jet-related phenomena, as well as jet-flame wall quenching. The relation between these phenomena and PC geometry, nozzle pattern, as well as ignition system has been also highlighted and discussed.

Efficient operation of battery energy storage systems (BESSs) requires a limited battery temperature range. The effects of parasitic heating and cooling loads on the optimal sizing of BESSs are investigated in this paper. Peak shaving is presented as a linear programming (LP) problem formulated in the PYOMO optimization programming language. The building energy simulation software EnergyPlus models the heating, ventilation, and air conditioning (HVAC) load of the BESS enclosure. A case study is analyzed in Fairbanks, Alaska, considering a lithium nickel manganese cobalt oxide (NMC) battery type and whether the power conversion system (PCS) is inside or outside the enclosure. The analysis illustrates that the HVAC load can have a large impact on the optimal energy and power capacities of an energy storage system and that insulating and including the PCS in the enclosure can reduce overall costs.

The application of traveling wave principles for fault detection in distribution systems is challenging because of multiple reflections from the laterals and other lumped elements, particularly when we consider communication-free applications. We propose and explore the use of Shapelets to characterize fault signatures and a data-driven machine learning model to accurately classify the faults based on their distance. Studies of a simple 5-bus system suggest that the use of Shapelets for detecting faults is promising. The application to practical three-phase distribution feeders is the subject of continuing research.

Calibrating a finite element model to test data is often required to accurately characterize a joint, predict its dynamic behavior, and determine fastener fatigue life. In this work, modal testing, model calibration, and fatigue analysis are performed for a bolted structure, and various joint modeling techniques are compared. The structure is designed to test a single bolt to fatigue failure by utilizing an electrodynamic modal shaker to axially force the bolted joint at resonance. Modal testing is done to obtain the dynamic properties, evaluate finite element joint modeling techniques, and assess the effectiveness of a vibration approach to fatigue testing of bolts. Results show that common joint models can be inaccurate in predicting bolt loads, and even when updated using modal test data, linear structural models alone may be insufficient in evaluating fastener fatigue.

Abstract not provided.

This paper focuses on the development and testing of spoofing detection and localization techniques that rely only on clock deviations to identify threat signals. Detection methods that rely on dynamic receiver geometries to triangulate threat locations or signal geometry to identify spoofing are not considered here. Instead this paper focuses on single antenna receivers and assumes the receiver tracks only the inauthentic signal. The quality of the receiver clock has a significant impact on the performance of the receiver tracking loops. Low quality clocks have frequency instabilities that inherently limit the sensitivity of the receiver to slow growing errors. Some clocks provide better frequency stabilities but have a higher white frequency noise that can induce false detections. Because of these trends, various detection methods are tested with four types of receiver and transmitter clocks of varying quality.

This paper presents a visualization technique for incorporating eigenvector estimates with geospatial data to create inter-area mode shape maps. For each point of measurement, the method specifies the radius, color, and angular orientation of a circular map marker. These characteristics are determined by the elements of the right eigenvector corresponding to the mode of interest. The markers are then overlaid on a map of the system to create a physically intuitive visualization of the mode shape. This technique serves as a valuable tool for differentiating oscillatory modes that have similar frequencies but different shapes. This work was conducted within the Western Interconnection Modes Review Group (WIMRG) in the Western Electric Coordinating Council (WECC). For testing, we employ the WECC 2021 Heavy Summer base case, which features a high-fidelity, industry standard dynamic model of the North American Western Interconnection. Mode estimates are produced via eigen-decomposition of a reduced-order state matrix identified from simulated ringdown data. The results provide improved physical intuition about the spatial characteristics of the inter-area modes. In addition to offline applications, this visualization technique could also enhance situational awareness for system operators when paired with online mode shape estimates.

Expansion techniques are powerful tools that can take a limited measurement set and provide information on responses at unmeasured locations. Expansion techniques are used in dynamic environments specifications, full field stress measurements, model calibration, and other calculations that require response at locations not measured. However, the process of modal expansion techniques such as SEREP (System Equivalent Reduction Expansion Process) has error with the projection of the measurement set of degrees of freedom to the expanded degrees of freedom. Empirical evidence has been used in the past to qualitatively determine the error. In recent years, the modal projection error was developed to quantify the error through a projection between different domains. The modal projection error is used in this paper to demonstrate the use of the metric in quantifying the error of the expansion process and to quantify which modes of the expansion process are the most important.

Abstract not provided.

The paper proposes an implementation of Graph Neural Networks (GNNs) for distribution power system Traveling Wave (TW) - based protection schemes. Simulated faults on the IEEE 34 system are processed by using the Karrenbauer Transform and the Stationary Wavelet Transform (SWT), and the energy of the resulting signals is calculated using the Parseval's Energy Theorem. This data is used to train Graph Convolutional Networks (GCNs) to perform fault zone location. Several levels of measurement noise are considered for comparison. The results show outstanding performance, more than 90% for the most developed models, and outline a fast, reliable, asynchronous and distributed protection scheme for distribution level networks.

In accident scenarios involving release of tritium during handling and storage, the level of risk to human health is dominated by the extent to which radioactive tritium is oxidized to the water form (T2O or THO). At some facilities, tritium inventories consist of very small quantities stored at sub-atmospheric pressure, which means that tritium release accident scenarios will likely produce concentrations in air that are well below the lower flammability limit. It is known that isotope effects on reaction rates should result in slower oxidation rates for heavier isotopes of hydrogen, but this effect has not previously been quantified for oxidation at concentrations well below the lower flammability limit for hydrogen. This work describes hydrogen isotope oxidation measurements in an atmospheric tube furnace reactor. These measurements consist of five concentration levels between 0.01% and 1% protium or deuterium and two residence times. Oxidation is observed to occur between about 550°C and 800°C, with higher levels of conversion achieved at lower temperatures for protium with respect to deuterium at the same volumetric inlet concentration and residence time. Computational fluid dynamics simulations of the experiments were used to customize reaction orders and Arrhenius parameters in a 1-step oxidation mechanism. The trends in the rates for protium and deuterium are extrapolated based on guidance from literature to produce kinetic rate parameters appropriate for tritium oxidation at low concentrations.

Abstract not provided.

Incorrect modeling of control characteristics for inverter-based resources (IBRs) can affect the accuracy of electric power system studies. In many distribution system contexts, the control settings for behind-the-meter (BTM) IBRs are unknown. This paper presents an efficient method for selecting a small number of time series samples from net load meter data that can be used for reconstructing or classifying the control settings of BTM IBRs. Sparse approximation techniques are used to select the time series samples that cause the inversion of a matrix of candidate responses to be as well-conditioned as possible. We verify these methods on 451 actual advanced metering infrastructure (AMI) datasets from loads with BTM IBRs. Selecting 60 15-minute granularity time series samples, we recover BTM control characteristics with a mean error less than 0.2 kVAR.

This paper summarizes the development of post-closure safety assessment for radioactive waste disposal from the point of view of scenarios, which occupy the key point in the process between FEPs and assessment using conceptual, mathematical, and numerical models. Scenarios are used in other fields for similar purposes, but they have a central role in safety assessment for radioactive waste disposal, given the large uncertainties in natural and engineered systems over long time periods. Repository design and assessments are built around a base scenario, which is usually built up from FEPs in a deductive bottom-up fashion. The alternative scenarios are often a perturbation of the base scenario, constructed in a top-down fashion around individual safety functions of key repository features. Despite differences between nations in how they implement scenarios, largely from regulatory differences, the concept of scenarios is beneficial and is used universally in development of deep geological repositories. The methodology has also seen some use outside the field radioactive waste disposal, but its wider adoption might be warranted.

Numerical simulations of Greenland and Antarctic ice sheets involve the solution of large-scale highly nonlinear systems of equations on complex shallow geometries. This work is concerned with the construction of Schwarz preconditioners for the solution of the associated tangent problems, which are challenging for solvers mainly because of the strong anisotropy of the meshes and wildly changing boundary conditions that can lead to poorly constrained problems on large portions of the domain. Here, two-level generalized Dryja-Smith-Widlund (GDSW)-type Schwarz preconditioners are applied to different land ice problems, i.e., a velocity problem, a temperature problem, as well as the coupling of the former two problems. We employ the message passing interface (MPI)- parallel implementation of multilevel Schwarz preconditioners provided by the package FROSch (fast and robust Schwarz) from the Trilinos library. The strength of the proposed preconditioner is that it yields out-of-the-box scalable and robust preconditioners for the single physics problems. To the best of our knowledge, this is the first time two-level Schwarz preconditioners have been applied to the ice sheet problem and a scalable preconditioner has been used for the coupled problem. The preconditioner for the coupled problem differs from previous monolithic GDSW preconditioners in the sense that decoupled extension operators are used to compute the values in the interior of the subdomains. Several approaches for improving the performance, such as reuse strategies and shared memory OpenMP parallelization, are explored as well. In our numerical study we target both uniform meshes of varying resolution for the Antarctic ice sheet as well as nonuniform meshes for the Greenland ice sheet. We present several weak and strong scaling studies confirming the robustness of the approach and the parallel scalability of the FROSch implementation. Among the highlights of the numerical results are a weak scaling study for up to 32 K processor cores (8 K MPI ranks and 4 OpenMP threads) and 566 M degrees of freedom for the velocity problem as well as a strong scaling study for up to 4 K processor cores (and MPI ranks) and 68 M degrees of freedom for the coupled problem.

The development of the High-Resolution Wavelet Transform (HRWT) is driven by the need of increasing the high-frequency resolution of widely used discrete Wavelet Transforms (WTs). Based on the Stationary Wavelet Transform (SWT), which is a modification of the Discrete Wavelet Transform (DWT), a novel WT that increases the number of decomposition levels (therefore increasing the previously mentioned frequency resolution) is proposed. In order to show the validity of the HRWT, this paper encompasses a theoretical comparison with other discrete WT methods. First, a summary of the DWT and the SWT, along with a brief explanation of the WT theory, is provided. Then, the concept of the HRWT is presented, followed by a discussion of the adherence of this new method to the WT's common properties. Finally, an example of the application is performed on a transient waveform analysis from a power system fault event, outlining the benefits that can be obtained from its usage compared to the SWT.

Calibrating a finite element model to test data is often required to accurately characterize a joint, predict its dynamic behavior, and determine fastener fatigue life. In this work, modal testing, model calibration, and fatigue analysis are performed for a bolted structure, and various joint modeling techniques are compared. The structure is designed to test a single bolt to fatigue failure by utilizing an electrodynamic modal shaker to axially force the bolted joint at resonance. Modal testing is done to obtain the dynamic properties, evaluate finite element joint modeling techniques, and assess the effectiveness of a vibration approach to fatigue testing of bolts. Results show that common joint models can be inaccurate in predicting bolt loads, and even when updated using modal test data, linear structural models alone may be insufficient in evaluating fastener fatigue.

We investigate the space complexity of two graph streaming problems: MAX-CUT and its quantum analogue, QUANTUM MAX-CUT. Previous work by Kapralov and Krachun [STOC 19] resolved the classical complexity of the classical problem, showing that any (2 - ?)-approximation requires O(n) space (a 2-approximation is trivial with O(log n) space). We generalize both of these qualifiers, demonstrating O(n) space lower bounds for (2 - ?)-approximating MAX-CUT and QUANTUM MAX-CUT, even if the algorithm is allowed to maintain a quantum state. As the trivial approximation algorithm for QUANTUM MAX-CUT only gives a 4-approximation, we show tightness with an algorithm that returns a (2 + ?)-approximation to the QUANTUM MAX-CUT value of a graph in O(log n) space. Our work resolves the quantum and classical approximability of quantum and classical Max-Cut using o(n) space.We prove our lower bounds through the techniques of Boolean Fourier analysis. We give the first application of these methods to sequential one-way quantum communication, in which each player receives a quantum message from the previous player, and can then perform arbitrary quantum operations on it before sending it to the next. To this end, we show how Fourier-analytic techniques may be used to understand the application of a quantum channel.

Neural networks (NN) have become almost ubiquitous with image classification, but in their standard form produce point estimates, with no measure of confidence. Bayesian neural networks (BNN) provide uncertainty quantification (UQ) for NN predictions and estimates through the posterior distribution. As NN are applied in more high-consequence applications, UQ is becoming a requirement. Automating systems can save time and money, but only if the operator can trust what the system outputs. BNN provide a solution to this problem by not only giving accurate predictions and estimates, but also an interval that includes reasonable values within a desired probability. Despite their positive attributes, BNN are notoriously difficult and time consuming to train. Traditional Bayesian methods use Markov Chain Monte Carlo (MCMC), but this is often brushed aside as being too slow. The most common method is variational inference (VI) due to its fast computation, but there are multiple concerns with its efficacy. MCMC is the gold standard and given enough time, will produce the correct result. VI, alternatively, is an approximation that converges asymptotically. Unfortunately (or fortunately), high consequence problems often do not live in the land of asymtopia so solutions like MCMC are preferable to approximations. We apply and compare MCMC-and VI-trained BNN in the context of target detection in hyperspectral imagery (HSI), where materials of interest can be identified by their unique spectral signature. This is a challenging field, due to the numerous permuting effects practical collection of HSI has on measured spectra. Both models are trained using out-of-the-box tools on a high fidelity HSI target detection scene. Both MCMC-and VI-trained BNN perform well overall at target detection on a simulated HSI scene. Splitting the test set predictions into two classes, high confidence and low confidence predictions, presents a path to automation. For the MCMC-trained BNN, the high confidence predictions have a 0.95 probability of detection with a false alarm rate of 0.05 when considering pixels with target abundance of 0.2. VI-trained BNN have a 0.25 probability of detection for the same, but its performance on high confidence sets matched MCMC for abundances >0.4. However, the VI-trained BNN on this scene required significant expert tuning to get these results while MCMC worked immediately. On neither scene was MCMC prohibitively time consuming, as is often assumed, but the networks we used were relatively small. This paper provides an example of how to utilize the benefits of UQ, but also to increase awareness that different training methods can give different results for the same model. If sufficient computational resources are available, the best approach rather than the fastest or most efficient should be used, especially for high consequence problems.

This paper discusses the development and current status of a recommended practice by the members of IEEE Working Group P2688 on Energy Storage Management Systems (ESMS) in grid applications. The intent of this recommended practice is to provide a reference for ESMS designers and ESS integrators regarding the challenges in ESMS development and deployment, and to provide recommendations and best practices to address these challenges. This recommended practice will assist in the selection between design options by supplying the pros and cons for a range of technical solutions.

This chapter deals with experimental dynamic substructures which are reduced order models that can be coupled with each other or with finite element derived substructures to estimate the system response of the coupled substructures. A unifying theoretical framework in the physical, modal or frequency domain is reviewed with examples. The major issues that have hindered experimental based substructures are addressed. An example is demonstrated with the transmission simulator method that overcomes the major historical difficulties. Guidelines for the transmission simulator design are presented.

The DOE GeoVision study identified that Enhanced Geothermal Systems (EGS) resources have the potential to provide a significant contribution toward achieving the goal of converting the U.S. electricity system to 100% clean energy over the next few decades. To further the implementation of commercial EGS development, DOE's Geothermal Technologies Office (GTO) initiated the Wells of Opportunity (WOO) Amplify program, where unproductive wells in selected geothermal fields are to be stimulated using EGS technologies, resulting in increased power production from these resources. As part of the WOO-Amplify project, GTO assembled the Amplify Monitoring Team (AMT), whose role is to provide in-field and near-field seismic monitoring design, deployment and data analysis for stimulations under the WOO-Amplify initiative. This team, consisting of scientists and engineers from Lawrence Berkeley National Laboratory (LBNL), Sandia National Laboratories (SNL), and the US Geological Survey (USGS), is working with WOO-Amplify EGS Operators in Nevada to develop and deploy optimized seismic monitoring systems at four geothermal fields where WOO-Amplify well stimulations are planned: Don A. Campbell, Tungsten Mountain and Jersey Valley operated by Ormat Technologies, and Patua operated by Cyrq Patua Acquisition Company LLC. Using geologic and geophysical field data provided by the WOO-Amplify teams, the focus of the AMT is to develop advanced simulation and modeling techniques, design targeted seismic monitoring arrays, develop innovative and cost-effective methodologies for drilling seismic monitoring boreholes, deploy effective seismic instrumentation, and facilitate the use of microseismic data to monitor well stimulation and flow within the geothermal reservoir. Realtime seismic data from the four WOO-Amplify sites will be streamed to a publicly accessible Amplify Monitoring website. AMT's advanced simulations and template matching techniques applied during pre-stimulation phases can help improve understanding of potential seismic hazard and inform the Operator's Induced Seismicity Mitigation Protocol (ISMP). Over the next two years, AMT will be drilling, instrumenting, and recording seismic data at the WOO-Amplify field sites, telemetering the seismic waveform data to AMT's central processing system and providing the processed location data to the WOO Amplify Operator teams. These data and monitoring systems will be critical for effective monitoring of the effects of planned well stimulation and extended flow tests during the next stage of the WOO-Amplify project.

Density fluctuations in compressible turbulent boundary layers cause aero-optical distortions that affect the performance of optical systems such as sensors and lasers. The development of models for predicting the aero-optical distortions relies on theory and reference data that can be obtained from experiments and time-resolved simulations. This paper reports on wall-modeled large-eddy simulations of turbulent boundary layers over a flat plate at Mach 3.5, 7.87, and 13.64. The conditions for the Mach 3.5 case match those for the DNS presented by Miller et al.1 The Mach 7.87 simulation match those inside the Hypersonic Wind Tunnel at Sandia National Laboratories. For the Mach 13.64, the conditions inside the Arnold Engineering Development Complex Hypervelocity Tunnel 9 are matched. Overall, adequate agreement of the velocity and temperature as well as Reynolds stress profiles with reference data from direct numerical simulations is obtained for the different Mach numbers. For all three cases, the normalized root-mean-square optical path difference was computed and compared with data obtained from the reference direct numerical simulations and experiments, as well as predictions obtained with a semi-analytical relationship by Notre Dame University. Above Mach five, the normalized path difference obtained from the simulations is above the model prediction. This provides motivation for future work aimed at evaluating the assumptions behind the Notre Dame model for hypersonic boundary layer flows.

Abstract not provided.

The characterization of mixtures of non-interacting, spectroscopically similar quantum components has important applications in chemistry, biology, and materials science. We introduce an approach based on quantum tracking control that allows for determining the relative concentrations of constituents in a quantum mixture, using a single pulse which enhances the distinguishability of components of the mixture and has a length that scales linearly with the number of mixture constituents. To illustrate the method, we consider two very distinct model systems: mixtures of diatomic molecules in the gas phase, as well as solid-state materials composed of a mixture of components. A set of numerical analyses are presented, showing strong performance in both settings.

This paper describes how the performance of motion primitive-based planning algorithms can be improved using reinforcement learning. Specifically, we describe and evaluate a framework that autonomously improves the performance of a primitive-based motion planner. The improvement process consists of three phases: exploration, extraction, and reward updates. This process can be iterated continuously to provide successive improvement. The exploration step generates new trajectories, and the extraction step identifies new primitives from these trajectories. These primitives are then used to update rewards for continued exploration. This framework required novel shaping rewards, development of a primitive extraction algorithm, and modification of the Hybrid A* algorithm. The framework is tested on a navigation task using a nonlinear F-16 model. The framework autonomously added 91 motion primitives to the primitive library and reduced average path cost by 21.6 s, or 35.75% of the original cost. The learned primitives are applied to an obstacle field navigation task, which was not used in training, and reduced path cost by 16.3 s, or 24.1%. Additionally, two heuristics for the modified Hybrid A* algorithm are designed to improve effective branching factor.

Wargames are a common tool for investigating complex conflict scenarios and have a long history of informing military and strategic study. Historically, these games have often been one offs, may not rigorously collect data, and have been built primarily for exploration rather than developing data-driven analytical conclusions. Experimental wargaming, a new wargaming approach that employs the basic principles of experimental design to facilitate an objective basis for exploring fundamental research questions around human behavior (such as understanding conflict escalation), is a potential tool that can be used in combination with existing wargaming approaches. The Project on Nuclear Gaming, a consortium involving the University of California, Berkeley, Sandia National Laboratories, and Lawrence Livermore National Laboratory, developed an experimental wargame, SIGNAL, to explore questions surrounding conflict escalation and strategic stabil-ity in the nuclear context. To date, the SIGNAL experimental wargame has been played hundreds of times by thousands of players from around the world, creating the largest data-base of wargame data for academic purposes known to the authors. This paper discusses the design of SIGNAL, focusing on how the principles of experimental design influenced this design.

A novel method for fault classification and location is presented in this paper. This method is divided into an initial signal processing stage that is followed by a machine learning stage. The initial stage analyzes voltages and currents with a window-based approach based on the dynamic mode decomposition (DMD) and then applies signal norms to the resulting DMD data. The outputs for the signal norms are used as features for a random-forests for classifying the type of fault in the system as well as for fault location purposes. The method was tested on a small distribution system where it showed an accuracy of 100% in fault classification and a mean error of ~ 30 m when predicting the fault location.

In this paper, we address the problem of convergence of sequential variational inference filter (VIF) through the application of a robust variational objective and H∞-norm based correction for a linear Gaussian system. As the dimension of state or parameter space grows, performing the full Kalman update with the dense covariance matrix for a large-scale system requires increased storage and computational complexity, making it impractical. The VIF approach, based on mean-field Gaussian variational inference, reduces this burden through the variational approximation to the covariance usually in the form of a diagonal covariance approximation. The challenge is to retain convergence and correct for biases introduced by the sequential VIF steps. We desire a frame-work that improves feasibility while still maintaining reasonable proximity to the optimal Kalman filter as data is assimilated. To accomplish this goal, a H∞-norm based optimization perturbs the VIF covariance matrix to improve robustness. This yields a novel VIF-H∞ recursion that employs consecutive variational inference and H∞ based optimization steps. We explore the development of this method and investigate a numerical example to illustrate the effectiveness of the proposed filter.

In high temperature (HT) environments often encountered in geothermal wells, data rate transfers for downhole instrumentation are relatively limited due to transmission line bandwidth and insertion loss and the processing speed of HT microcontrollers. In previous research, Sandia National Laboratory Geothermal Department obtained 3.8 Mbps data rates over 1524 m (5000 ft) for single conductor wireline cable with less than a 1x10-8 bit error rate utilizing low temperature NITM hardware (formerly National InstrumentsTM). Our protocol technique was a combination of orthogonal frequency-division multiplexing and quadrature amplitude modulation across the bandwidth of the single conductor wireline. This showed it is possible to obtain high data rates in low bandwidth wirelines. This paper focuses on commercial HT microcontrollers (µC), rather than low temperature NITM modules, to enable high-speed communication in an HT environment. As part of this effort, four devices were evaluated, and an optimal device (SM320F28335-HT) was selected for its high clock rates, floating-point unit, and on-board analog-to-digital converter. A printed circuit board was assembled with the HT µC, an HT resistor digital-to-analog converter, and an HT line driver. The board was tested at the microcontroller's rated maximum temperature (210°C) for a week while transmitting through a 1524 m (5000 ft) wireline. A final test was conducted to the point of failure at elevated temperatures. This paper will discuss communication methods, achieved data rates, and hardware selection. This effort contributes to the enhancement of HT instrumentation by enabling greater sensor counts and improving data accuracy and transfer rates.

We report an analysis quantifying the contribution to uncertainty in annual energy projections from uncertainty in ground-measured irradiance. Uncertainty in measured irradiance is quantified for eight instruments by the difference from a well-maintained, secondary standard pyranometer which is regarded as truthful. We construct a statistical model of irradiance uncertainty and apply the model to generate a sample of 100 annual time series of irradiance for each instrument. The sample is propagated through a common performance model for a reference photovoltaic system to quantify variation in annual energy. Although the measured irradiance varies from the reference by a few percent (standard deviation of 1-2%) the uncertainty in annual energy is on the order of a fraction of one percent. We propose a model for a factor that represents uncertainty in modeled annual energy that arises from uncertainty in ground-measured irradiance.

This paper applies sensitivity and uncertainty analysis to compare two model alternatives for fuel matrix degradation for performance assessment of a generic crystalline repository. The results show that this model choice has little effect on uncertainty in the peak 129I concentration. The small impact of this choice is likely due to the higher importance of uncertainty in the instantaneous release fraction and differences in epistemic uncertainty between the alternatives.

Measurements that occur within the internal layers of a quantum circuit—midcircuit measurements—are a useful quantum-computing primitive, most notably for quantum error correction. Midcircuit measurements have both classical and quantum outputs, so they can be subject to error modes that do not exist for measurements that terminate quantum circuits. Here we show how to characterize midcircuit measurements, modeled by quantum instruments, using a technique that we call quantum instrument linear gate set tomography (QILGST). We then apply this technique to characterize a dispersive measurement on a superconducting transmon qubit within a multiqubit system. By varying the delay time between the measurement pulse and subsequent gates, we explore the impact of residual cavity photon population on measurement error. QILGST can resolve different error modes and quantify the total error from a measurement; in our experiment, for delay times above 1000ns we measure a total error rate (i.e., half diamond distance) of ϵ⋄=8.1±1.4%, a readout fidelity of 97.0±0.3%, and output quantum-state fidelities of 96.7±0.6% and 93.7±0.7% when measuring 0 and 1, respectively.

Limited access to transmission lines after a major contingency event can inhibit restoration efforts. After Hurricane Maria, for example, flooding and landslides damaged roads and thus limited travel. Transmission lines are also often situated far from maintained roadways, further limiting the ability to access and repair them. Therefore, this paper proposes a methodology for assessing Puerto Rico's infrastructure (i.e., roads and transmission lines) to identify potentially hard to reach areas due to natural risks or distance to roads. The approach uses geographic information system (GIS) data to define vulnerable areas, that may experience excessive restoration times. The methodology also uses graph theory analysis to find transmission lines with high centrality (or importance). Comparison of these important transmission lines with the vulnerability results found that many reside near roads that are at risk for landslides or floods.

Metasurface lenses are fabricated using membrane projection lithography following a CMOS-compatible process flow. The lenses are 10-mm in diameter and employ 3-dimensional unit cells designed to function in the mid-infrared spectral range.

A proper understanding of the complex physics associated with nonlinear dynamics can improve the accuracy of predictive engineering models and provide a foundation for understanding nonlinear response during environmental testing. Several researchers and studies have previously shown how localized nonlinearities can influence the global vibration modes of a system. This current work builds upon the study of a demonstration aluminum aircraft with a mock pylon with an intentionally designed, localized nonlinearity. In an effort to simplify the identification of the localized nonlinearity, previous work has developed a simplified experimental setup to collect experimental data for the isolated pylon mounted to a stiff fixture. This study builds on these test results by correlating a multi-degree-of-freedom model of the pylon to identify the appropriate model form and parameters of the nonlinear element. The experimentally measured backbone curves are correlated with a nonlinear Hurty/Craig-Bampton (HCB) reduced order model (ROM) using the calculated nonlinear normal modes (NNMs). Following the calibration, the nonlinear HCB ROM of the pylon is attached to a linear HCB ROM of the wing to predict the NNMs of the next-level wing-pylon assembly as a pre-test analysis to better understand the significance of the localized nonlinearity on the global modes of the wing structure.

With machine learning (ML) technologies rapidly expanding to new applications and domains, users are collaborating with artificial intelligence-assisted diagnostic tools to a larger and larger extent. But what impact does ML aid have on cognitive performance, especially when the ML output is not always accurate? Here, we examined the cognitive effects of the presence of simulated ML assistance-including both accurate and inaccurate output-on two tasks (a domain-specific nuclear safeguards task and domain-general visual search task). Patterns of performance varied across the two tasks for both the presence of ML aid as well as the category of ML feedback (e.g., false alarm). These results indicate that differences such as domain could influence users' performance with ML aid, and suggest the need to test the effects of ML output (and associated errors) in the specific context of use, especially when the stimuli of interest are vague or ill-defined.

Adaptive protection is defined as a real-time system that can modify the protective actions according to the changes in the system condition. An adaptive protection system (APS) is conventionally coordinated through a central management system located at the distribution system substation. An APS depends significantly on the communication infrastructure to monitor the latest status of the electric power grid and send appropriate settings to all of the protection relays existing in the grid. This makes an APS highly vulnerable to communication system failures (e.g., broken communication links due to natural disasters as well as wide-range cyber-attacks). To this end, this paper presents the addition of local adaptive modular protection (LAMP) units to the protection system to guarantee its reliable operation under extreme events when the operation of the APS is compromised. LAMP units operate in parallel with the conventional APS. As a backup, if APS fails to operate because of an issue in the communication system, LAMP units can accommodate a reliable fault detection and location on behalf of the protection relay. The performance of the proposed APS is verified using IEEE 123 node test system.

With the increase in penetration of inverter-based resources (IBRs) in the electrical power system, the ability of these devices to provide grid support to the system has become a necessity. With standards previously developed for the interconnection requirements of grid-following inverters (GFLI) (most commonly photovoltaic inverters), it has been well documented how these inverters 'should' respond to changes in voltage and frequency. However, with other IBRs such as grid-forming inverters (GFMIs) (used for energy storage systems, standalone systems, and as uninterruptable power supplies) these requirements are either: not yet documented, or require a more in deep analysis. With the increased interest in microgrids, GFMIs that can be paralleled onto a distribution system have become desired. With the proper control schemes, a GFMI can help maintain grid stability through fast response compared to rotating machines. This paper will present an experimental comparison of commercially available GFMIand GFLI ' responses to voltage and frequency deviation, as well as the GFMIoperating as a standalone system and subjected to various changes in loads.

Transient stability control of power systems is based on actions that are taken automatically following a disturbance to ensure that the system remains in synchronism. Examples of such measures include generator rejection and the insertion of dynamic braking resistors. Methods like these are designed to rapidly absorb excess energy or otherwise alter the generation-demand balance at key points in the system. While these methods are often effective, they lack the ability to inject real power to compensate for a deficit. Utility-scale inverter-based resources, particularly energy storage systems, enable bidirectional modulation of real power with the bandwidth necessary to provide synchronizing torque. These resources, and the control strategies they enable, have garnered substantial research interest. This paper provides a critical review of research on real power modulation strategies for transient stability control. The design of these control strategies is heavily informed by the methods used to assess changes in the transient stability margins. Rigorously assessing these changes is difficult because the dynamics of large-scale power systems are inherently nonlinear. The well-known equal-area criterion is physically intuitive, but conceptual extensions are necessary for multi-machine systems. So-called direct methods of transient stability analysis offer a more general alternative; however, these methods require many simplifying assumptions and have difficulty incorporating detailed system dynamics. In this paper, we discuss data-driven methods for offline stability assessment based on Koopman operator theory.

The use of p-, and ℎp-nonconformal interfaces enables greater geometric flexibility in performing computational science simulations, especially when relying on efficient tensor-product-based high-order Summation-by-Parts element schemes. For high-speed compressible computational fluid dynamics, the underlying numerical method must be conservative such that the discretization of the governing equations satisfies the Rankine Hugoniot relations. This paper extends the conservative nonconformal interface method of [1] to Summation-by-Parts elements with face quadratures of degree less than 2p, specifically allowing which allows the use of tensor-product elements on the Legendre-Gauss-Lobatto nodes, which are accurate up to degree 2p − 1. This formulation does not satisfy the inner-product preservation property of [1], but nonetheless remains conservative, entropy stable, and free-stream preserving. Mathematical theory is developed to determine the required accuracy of the mortar grid quadrature rule, and numerical results verify the mathematical results.

Many teams struggle to adapt and right-size software engineering best practices for quality assurance to fit their context. Introducing software quality is not usually framed in a way that motivates teams to take action, thus resulting in it becoming a "check the box for compliance"activity instead of a cultural practice that values software quality and the effort to achieve it. When and how can we provide effective incentives for software teams to adopt and integrate meaningful and enduring software quality practices? We explored this question through a persona-based ideation exercise at the 2021 Collegeville Workshop on Scientific Software in which we created three unique personas that represent different scientific software developer perspectives.

We computationally explore the optical and elastic modes necessary for acoustoelectrically enhanced Brillouin interactions. The large simulated piezoelectric (k2 « 6%) and optome-chanica (lgol ≈ 8000 (rad/s)√m) coupling theoretically predicts a performance enhancement several order of magniude in brrloum-based photoine tecnnologres.

This paper presents a literature review on current practices and trends on cyberphysical security of grid-connected battery energy storage systems (BESSs). Energy storage is critical to the operation of Smart Grids powered by intermittent renewable energy resources. To achieve this goal, utility-scale and consumer-scale BESS will have to be fully integrated into power systems operations, providing ancillary services and performing functions to improve grid reliability, balance power and demand, among others. This vision of the future power grid will only become a reality if BESS are able to operate in a coordinated way with other grid entities, thus requiring significant communication capabilities. The pervasive networking infrastructure necessary to fully leverage the potential of storage increases the attack surface for cyberthreats, and the unique characteristics of battery systems pose challenges for cyberphysical security. This paper discusses a number of such threats, their associated attack vectors, detection methods, protective measures, research gaps in the literature and future research trends.

This paper describes an efficient reverse-mode differentiation algorithm for contraction operations for arbitrary and unconventional tensor network topologies. The approach leverages the tensor contraction tree of Evenbly and Pfeifer (2014), which provides an instruction set for the contraction sequence of a network. We show that this tree can be efficiently leveraged for differentiation of a full tensor network contraction using a recursive scheme that exploits (1) the bilinear property of contraction and (2) the property that trees have a single path from root to leaves. While differentiation of tensor-tensor contraction is already possible in most automatic differentiation packages, we show that exploiting these two additional properties in the specific context of contraction sequences can improve eficiency. Following a description of the algorithm and computational complexity analysis, we investigate its utility for gradient-based supervised learning for low-rank function recovery and for fitting real-world unstructured datasets. We demonstrate improved performance over alternating least-squares optimization approaches and the capability to handle heterogeneous and arbitrary tensor network formats. When compared to alternating minimization algorithms, we find that the gradient-based approach requires a smaller oversampling ratio (number of samples compared to number model parameters) for recovery. This increased efficiency extends to fitting unstructured data of varying dimensionality and when employing a variety of tensor network formats. Here, we show improved learning using the hierarchical Tucker method over the tensor-train in high-dimensional settings on a number of benchmark problems.

Abstract not provided.

Sandia provided technical assistance to Kit Carson Electric Cooperative (KCEC) to assess the technical merits of a proposed community resilience microgrid project in the Village of El Rito, New Mexico (NM). The project includes a proposed community resilience microgrid in the Village of El Rito, NM, around the campus of Northern New Mexico College (NNMC). A conceptual microgrid analysis plan was performed, considering a campus and community-wide approach. The analysis results provided conceptual microgrid configurations, optimized according to the performance metrics defined. The campus microgrid was studied independently and many conceptual microgrid solutions were provided that met the performance requirements. Considering the existing 1.5 MW PV system on campus far exceeds the simulated campus load peak and energy demand, a small battery installation was deemed sufficient to support the campus microgrid goals. Following the analysis and consultation, it was determined that the core Resilient El Rito team will need to further investigate the results for additional economic and environmental considerations to continue toward the best approach for their goals and needs.

Using the power balance method we estimate the maximum electric field on a conducting wall of a cavity containing an interior structure supporting eccentric coaxial modes in the frequency regime where the resonant modes are isolated from each other.

We examine coupling into azimuthal slots on an infinite cylinder with a infinite length interior cavity operating both at the fundamental cavity modal frequencies, with small slots and a resonant slot, as well as higher frequencies. The coupling model considers both radiation on an infinite cylindrical exterior as well as a half space approximation. Bounding calculations based on maximum slot power reception and interior power balance are also discussed in detail and compared with the prior calculations. For higher frequencies limitations on matching are imposed by restricting the loads ability to shift the slot operation to the nearest slot resonance; this is done in combination with maximizing the power reception as a function of angle of incidence. Finally, slot power mismatch based on limited cavity load quality factor is considered below the first slot resonance.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Water and climate change pose many potential challenges to the electric power system. Substantial water is withdrawn every day to support thermoelectric power generating unit operations, and changes to water supply have the potential to affect generation dispatch. Climate change can accelerate growing demand for electricity, which can necessitate additional generating capacity, often in locations with limited water supply. Drought conditions also threaten thermoelectric power plant operations due to streamflow and reservoir levels dropping below intake structures, or water temperatures exceeding a power plants' permitted operating conditions. Here we explore how future climate change might influence decisions related to electricity capacity expansion planning in Electric Reliability Council of Texas (ERCOT) using a multi-model framework. Specifically, water resource modeling is used to simulate climate impacts on the future water supply for thermoelectric and hydropower generation for four future climate projections. Separately, temperature impacts on electricity load are evaluated for these scenarios. These climate impacts are applied to five alternative electricity futures in an electricity capacity expansion model that projects future generation and transmission capacity additions in ERCOT. Results indicate that climate has a measurable influence on future generation and transmission capacity needs, with temperature-driven increases in peak and average load resulting in 5-15 GW additional generating capacity and up to 1 GW additional transmission capacity. Additional capacity is a diverse mix of PV, natural gas, and wind, depending on the makeup of economic, policy and technology assumptions. Climate impacts increase total system costs 2-5%, while the marginal cost of energy and emissions are not affected substantially by climate change effects.

This report summarizes the work performed under a project funded by U.S. DOE Solar Energy Technologies Office (SETO) to use grid edge measurements to calibrate distribution system models for improved planning and grid integration of solar PV. Several physics-based data-driven algorithms are developed to identify inaccuracies in models and to bring increased visibility into distribution system planning. This includes phase identification, secondary system topology and parameter estimation, meter-to-transformer pairing, medium-voltage reconfiguration detection, determination of regulator and capacitor settings, PV system detection, PV parameter and setting estimation, PV dynamic models, and improved load modeling. Each of the algorithms is tested using simulation data and demonstrated on real feeders with our utility partners. The final algorithms demonstrate the potential for future planning and operations of the electric power grid to be more automated and data-driven, with more granularity, higher accuracy, and more comprehensive visibility into the system.

The Sandia Optical Fringe Analysis Slope Tool (SOFAST) is a tool that has been developed at Sandia to measure the surface slope of concentrating solar power optics. This tool has largely remained of research quality over the past few years. Since SOFAST is important to ongoing tests happening at Sandia as well as an interest to others outside Sandia, there is a desire to bring SOFAST up to professional software standards. The goal of this effort was to make progress in several broad areas including: code quality, sample data collection, and validation and testing. During the course of this effort, much progress was made in these areas. SOFAST is now a much more professional grade tool. There are, however, some areas of improvement that could not be addressed in the timeframe of this work and will be addressed in the continuation of this effort.

SIERRA/Aero is a compressible fluid dynamics program intended to solve a wide variety compressible fluid flows including transonic and hypersonic problems. This document describes the commands for assembling a fluid model for analysis with this module, henceforth referred to simply as Aero for brevity. Aero is an application developed using the SIERRA Toolkit (STK). The intent of STK is to provide a set of tools for handling common tasks that programmers encounter when developing a code for numerical simulation. For example, components of STK provide field allocation and management, and parallel input/output of field and mesh data. These services also allow the development of coupled mechanics analysis software for a massively parallel computing environment.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Aria is a Galerkin finite element based program for solving coupled-physics problems described by systems of PDEs and is capable of solving nonlinear, implicit, transient and direct-to-steady state problems in two and three dimensions on parallel architectures. The suite of physics currently supported by Aria includes thermal energy transport, species transport, and electrostatics as well as generalized scalar, vector and tensor transport equations. Additionally, Aria includes support for manufacturing process flows via the incompressible Navier-Stokes equations specialized to a low Reynolds number (Re < 1) regime. Enhanced modeling support of manufacturing processing is made possible through use of either arbitrary Lagrangian-Eulerian (ALE) and level set based free and moving boundary tracking in conjunction with quasi-static nonlinear elastic solid mechanics for mesh control. Coupled physics problems are solved in several ways including fully-coupled Newton’s method with analytic or numerical sensitivities, fully-coupled Newton-Krylov methods and a loosely-coupled nonlinear iteration about subsets of the system that are solved using combinations of the aforementioned methods. Error estimation, uniform and dynamic ℎ-adaptivity and dynamic load balancing are some of Aria’s more advanced capabilities.

The Arroyo Seco Improvement Program (ASIP) is intended to provide active channel improvements and stream zone management activities that will reduce current flood and erosion risk while providing additional and improved habitat for critical species that may use the Arroyo Seco at the United States Department of Energy (DOE), Sandia National Laboratories, California (SNL/CA) location. The objectives of the ASIP are: correct existing channel stability problems associated with existing arroyo structures (i.e. bridges, security grates, utility crossings, and drain structures), correct bank erosion and provide protection against future erosion, reduce the risk of future flooding, and provide habitat improvement and creation of a mitigation credit for site development and management activities.

Abstract not provided.

Early on in 2018 Sandia recognized the Microsystems Engineering, Science and Applications (MESA) Programmatic Asset Lifecycle Planning capability to be unpredictable, inconsistent, reactive, and unable to provide strong linkage to the sponsor's needs. The impetus for this report is to share learnings from MESA's journey towards maturing this capability. This report describes re-building the foundational elements of MESA's Programmatic Asset Lifecycle Planning capability using a risk-based, Multi-Criteria Decision Analysis (MCDA) approach. To begin, MESA's decades-old Piano Chart + Ad Hoc Hybrid Methodology is described with a narrative of its strengths and weaknesses. Then its replacement, the MCDA /Analytical Hierarchy Process, is introduced with a discussion of its strengths and weaknesses. To generate a realistic Programmatic Asset Lifecycle Planning budget outlook, MESA used its rolling 20-year Extended Life Program Plan (MELPP) as a baseline. The new MCDA risk-based prioritization methodology implements DOE/NNSA guidelines for prioritization of DOE activities and provides a reliable, structured framework for combining expert judgement and stakeholder preferences according to an established scientific technique. An in-house Hybrid Decision Support System (HDSS) software application was developed to facilitate production of several key deliverables. The application enables analysis of the prioritization decisions with charts to display and provide linkage of MESA's funding requests to the stakeholders' priorities, strategic objectives, nuclear deterrence programs, MESA priorities, and much more.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

The UQ Toolkit (UQTk) is a collection of libraries and tools for the quantification of uncertainty in numerical model predictions. Version 3.1.2 offers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sensitivity analysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

Abstract not provided.

Abstract not provided.

This report describes recommended abuse testing procedures for rechargeable energy storage systems (RESSs) for electric vehicles. This report serves as a revision to the USABC Electrical Energy Storage System Abuse Test Manual for Electric and Hybrid Electric Vehicle Applications (SAND99-0497).

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

This document presents tests from the Sierra Structural Mechanics verification test suite. Each of these tests is run nightly with the Sierra/SD code suite and the results of the test checked versus the correct analytic result. For each of the tests presented in this document the test setup, derivation of the analytic solution, and comparison of the Sierra/SD code results to the analytic solution is provided. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems.

This user’s guide documents capabilities in Sierra/SolidMechanics which remain “in-development” and thus are not tested and hardened to the standards of capabilities listed in Sierra/SM 5.4 User’s Guide. Capabilities documented herein are available in Sierra/SM for experimental use only until their official release. These capabilities include, but are not limited to, novel discretization approaches such as the conforming reproducing kernel (CRK) method, numerical fracture and failure modeling aids such as the extended finite element method (XFEM) and J-integral, explicit time step control techniques, dynamic mesh rebalancing, as well as a variety of new material models and finite element formulations.

Aria is a Galerkin finite element based program for solving coupled-physics problems described by systems of PDEs and is capable of solving nonlinear, implicit, transient and direct-to-steady state problems in two and three dimensions on parallel architectures. The suite of physics currently supported by Aria includes thermal energy transport, species transport, and electrostatics as well as generalized scalar, vector and tensor transport equations. Additionally, Aria includes support for manufacturing process flows via the incompressible Navier-Stokes equations specialized to a low Reynolds number (Re < 1) regime. Enhanced modeling support of manufacturing processing is made possible through use of either arbitrary Lagrangian-Eulerian (ALE) and level set based free and moving boundary tracking in conjunction with quasi-static nonlinear elastic solid mechanics for mesh control. Coupled physics problems are solved in several ways including fully-coupled Newton’s method with analytic or numerical sensitivities, fully-coupled Newton-Krylov methods and a loosely-coupled nonlinear iteration about subsets of the system that are solved using combinations of the aforementioned methods. Error estimation, uniform and dynamic ℎ-adaptivity and dynamic load balancing are some of Aria’s more advanced capabilities.

Abstract not provided.

Abstract not provided.

Neural operators have recently become popular tools for designing solution maps between function spaces in the form of neural networks. Differently from classical scientific machine learning approaches that learn parameters of a known partial differential equation (PDE) for a single instance of the input parameters at a fixed resolution, neural operators approximate the solution map of a family of PDEs [6, 7]. Despite their success, the uses of neural operators are so far restricted to relatively shallow neural networks and confined to learning hidden governing laws. In this work, we propose a novel nonlocal neural operator, which we refer to as nonlocal kernel network (NKN), that is resolution independent, characterized by deep neural networks, and capable of handling a variety of tasks such as learning governing equations and classifying images. Our NKN stems from the interpretation of the neural network as a discrete nonlocal diffusion reaction equation that, in the limit of infinite layers, is equivalent to a parabolic nonlocal equation, whose stability is analyzed via nonlocal vector calculus. The resemblance with integral forms of neural operators allows NKNs to capture long-range dependencies in the feature space, while the continuous treatment of node-to-node interactions makes NKNs resolution independent. The resemblance with neural ODEs, reinterpreted in a nonlocal sense, and the stable network dynamics between layers allow for generalization of NKN’s optimal parameters from shallow to deep networks. This fact enables the use of shallow-to-deep initialization techniques [8]. Our tests show that NKNs outperform baseline methods in both learning governing equations and image classification tasks and generalize well to different resolutions and depths.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Numerical simulations of pressure-shear loading of a granular material are performed using the shock physics code CTH. A simple mesoscale model for the granular material is used that consists of a randomly packed arrangement of solid circular or spherical grains of uniform size separated by vacuum. The grain material is described by a simple shock equation of state, elastic perfectly plastic strength model, and fracture model with baseline parameters for WC taken from previous mesoscale modeling work. Simulations using the baseline material parameters are performed at the same initial conditions of pressure-shear experiments on dry WC powders. Except for some localized flow regions appearing in simulations with an approximate treatment of sliding interfaces among grains, the samples respond elastically during shear, which is in contrast to experimental observations. By extending the simulations to higher shear wave amplitudes, macroscopic shear failure of the simulated samples is observed with the shear strength increasing with increasing stress confinement. The shear strength is also found to be strongly dependent on the grain interface treatment and on the fracture stress of the grains, though the variation in shear strength due to fracture stress decreases with increasing stress confinement. At partial compactions, the transverse velocity histories show strain-hardening behavior followed by formation of a shear interface that extends through the transverse dimensions of the sample. Near full compaction, no strain hardening is observed and, instead, the sample transitions sharply from an elastic response to formation of an internal shear interface. Agreement with experiment is shown to worsen with increasing confinement stress with simulations overpredicting the shear strengths measured in experiment. The source of the disagreement can be ultimately attributed to the Eulerian nature of the simulations, which do not treat contact and fracture realistically.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Downtown low-voltage (LV) distribution networks are generally protected with network protectors that detect faults by restricting reverse power flow out of the network. This creates protection challenges for protecting the system as new smart grid technologies and distributed generation are installed. This report summarizes well-established methods for the control and protection of LV secondary network systems and spot networks, including operating features of network relays. Some current challenges and findings are presented from interviews with three utilities, PHI PEPCO, Oncor Energy Delivery, and Consolidated Edison Company of New York. Opportunities for technical exploration are presented with an assessment of the importance or value and the difficulty or cost. Finally, this leads to some recommendations for research to improve protection in secondary networks.

Abstract not provided.

Geothermal energy has been underutilized in the U.S., primarily due to the high cost of drilling in the harsh environments encountered during the development of geothermal resources. Drilling depths can approach 5,000 m with temperatures reaching 170 C. In situ geothermal fluids are up to ten times more saline than seawater and highly corrosive, and hard rock formations often exceed 240 MPa compressive strength. This combination of extreme conditions pushes the limits of most conventional drilling equipment. Furthermore, enhanced geothermal systems are expected to reach depths of 10,000 m and temperatures more than 300 °C. To address these drilling challenges, Sandia developed a proof-of-concept tool called the auto indexer under an annual operating plan task funded by the Geothermal Technologies Program (GTP) of the U.S. Department of Energy Geothermal Technologies Office. The auto indexer is a relatively simple, elastomer-free motor that was shown previously to be compatible with pneumatic hammers in bench-top testing. Pneumatic hammers can improve penetration rates and potentially reduce drilling costs when deployed in appropriate conditions. The current effort, also funded by DOE GTP, increased the technology readiness level of the auto indexer, producing a scaled prototype for drilling larger diameter boreholes using pneumatic hammers. The results presented herein include design details, modeling and simulation results, and testing results, as well as background on percussive hammers and downhole rotation.

This is an addendum to the Sierra/SolidMechanics 5.4 User’s Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State’s International Traffic in Arms Regulations (ITAR) export control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export control requirements. The ITAR enhancements to Sierra/SM include material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. This document is an addendum only; the standard Sierra/SolidMechanics 5.4 User’s Guide should be referenced for most general descriptions of code capability and use.

This SAND Report provides an overview of AniMACCS, the animation software developed for the MELCOR Accident Consequence Code System (MACCS). It details what users need to know in order to successfully generate animations from MACCS results. It also includes information on the capabilities, requirements, testing, limitations, input settings, and problem reporting instructions for AniMACCS version 1.3.1. Supporting information is provided in the appendices, such as guidance on required input files using both WinMACCS and running MACCS from the command line.

Abstract not provided.

Abstract not provided.

Abstract not provided.