Publications

Results 11601–11800 of 101,000

Search results

Jump to search filters

Vertical GaN Devices for Medium-Voltage Power Electronics

Kaplar, Robert J.; Allerman, Andrew A.; Crawford, Mary H.; Gunning, Brendan P.; Flicker, Jack D.; Armstrong, Andrew A.; Yates, Luke; Dickerson, Jeramy; Binder, Andrew T.; Abate, Vincent M.; Smith, Michael; Pickrell, Gregory W.; Sharps, Paul; Anderson, T.; Gallagher, J.; Jacobs, A.G.; Koehler, A.; Tadjer, M.; Hobart, K.; Hite, J.; Ebrish, M.; Porter, M.; Zeng, K.; Chowdhury, S.; Ji, D.; Aktas, O.; Cooper, James A.

Abstract not provided.

More Details
TYPE Conference Presentation YEAR 2021
DOIOSTI

Geometric Tail Approximation for Reliability and Survivability

Ackermann, Mark R.; Osborn, Thor D.

A common problem in developing high-reliability systems is estimating the reliability for a population of components that cannot be 100% tested. The radiation survivability of a population of components is often estimated by testing a very small sample to some multiple of the required specification level, known as an overtest. Given a successful test with a sufficient overtest margin, the population of components is assumed to have the required survivability or radiation reliability. However, no mathematical justification for such claims has been crafted without making aggressive assumptions regarding the statistics of the unknown distribution. Here we illustrate a new approach that leverages geometric bounding arguments founded on relatively modest distribution assumptions to produce conservative estimates of component reliability.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Applying Incremental, Inductive Model Checking to the Modal Mu Calculus

Rawlings, Blake C.

This work aims to demonstrate that an incremental inductive model checking algorithm built on top of Boolean satisfiability (SAT) solvers can be extended to support modal mu calculus (MMC) formulas. The resulting algorithm, called modal mu calculus model checking using myopic constraints (MC3), solves MMC model checking problems over Boolean labeled transition systems (LTSs). MMC subsumes simple invariance/reachability (as solved by the IC3 algorithm), linear temporal logic (LTL, as solved by the fair algorithm), computation tree logic (CTL, as solved by IICTL), and CTL* (which in turn subsumes LTL and CTL, but was not previously supported by any incremental inductive algorithm). The algorithm is implemented in a prototype solver, mc3.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Assessment of Electrode Contamination Mitigation at 0.5 MA Scale

Lamppa, Derek C.; Simpson, Sean; Hutsel, Brian T.; Cuneo, Michael E.; Laity, George R.; Rose, David V.

The Z Machine at Sandia National Laboratories uses current pulses with peaks up to 27 MA to drive target implosions and generate high energy density conditions of interest for stockpile stewardship programs pertinent to the NNSA program portfolio . Physical processes in the region near the Z Machine target create electrode plasmas which seed parasitic current loss that reduce the performance and output of a Z experiment. Electrode surface contaminants (hydrogen, water, hydrocarbons) are thought to be the primary constituent of electrode plasmas which contribute to loss mechanisms. The Sandia team explore d in situ heating and plasma discharge techniques by integrating requisite infrastructure into Sandia's Mykonos LTD accelerator, addressing potential impacts to accelerator operation, and reporting on the impact of these techniques on electrode plasma formation and shot performance. The in situ discharge cleaning utilizes the electrodes of the accelerator to excite an argon-oxygen plasma to sputter and chemically react contaminants from electrode surfaces. Insulating breaks are required to isolate the plasma in electrode regions where loss processes are most likely to occur. The shots on Mykonos validate that these breaks do not perturb experiment performance, reducing the uncertainty on the largest unknown about the in situ cleaning system. Preliminary observations with electrical and optical diagnostics suggest that electrode plasma formation is delayed, and overall inventory has been substantively reduced. In situ heating embeds cartridge heaters into accelerator electrodes and employs a thermal bakeout to rapidly desorb contaminants from electrode surfaces. For the first time, additively manufactured (AM) electrode assemblies were used on a low impedance accelerator to integrate cooling channels and manage thermal gradients. Challenges with poor supplier fabrication to specifications, load alignment, thermal expansion and hardware movement and warpage appears to have introduced large variability in observed loss, though, preventing strong assertions of loss reduction via in situ heating. At this time, an in situ discharge cleaning process offers the lowest risk path to reduce electrode contaminant inventories on Z, though we recommend continuing to develop both approaches. Additional engineering and testing are required to improve the implementation of both systems. .

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Topology Optimization with a Manufacturability Objective

Robbins, Joshua

Part distortion and residual stress are critical factors for metal additive manufacturing (AM) because they can lead to high failure rates during both manufacturing and service. We present a topology optimization approach that incorporates a fast AM process simulation at each design iteration to provide predictions of manufacturing outcomes (i.e., residual stress, distortion, residual elastic energy) that can be optimized or constrained. The details of the approach and implementation are discussed, and an example design is presented that illustrates the efficacy of the method.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Saturn Radiation Dose Environment Characterization

Ulmen, Ben; Depriest, Kendall R.; Olson, Aaron; Webb, Timothy J.; Edwards, Jarrod D.

To understand the environment where a time-resolved hard x-ray spectrometer (AXIOM) might be fielded, experiments and simulations were performed to analyze the radiation dose environment underneath the Saturn vacuum dome. Knowledge of this environment is critical to the design and placement of the spectrometer. Experiments demonstrated that the machine performance, at least in terms of on-axis dose, has not significantly changed over the decades. Simulations of the off-axis dose were performed to identify possible spectrometer locations of interest. The effects from the source and dome hardware as well as source distributions and angles of incidence on the radiation environment were also investigated. Finally, a unified radiation transport model was developed for two widely used radiation transport codes to investigate the off-axis dose profiles and the time-dependent x-ray energy spectrum. The demonstrated equivalence of the unified radiation transport model between the radiation transport codes allows the team to tie future time-dependent x-ray environment calculations to previous integral simulations for the Saturn facility.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Sustainable Functional Epoxies through Boric Acid Templating

Parada, Corey M.; Redline, Erica M.; Juba, Benjamin W.; Benally, Brynal; Sawyer, Patricia S.; Mowry, Curtis D.; Corbin, William

Thermoset polymers (e.g. epoxies, vulcanizable rubbers, polyurethanes, etc.) are crosslinked materials with excellent thermal, chemical, and mechanical stability; these properties make thermoset materials attractive for use in harsh applications and environments. Unfortunately, material robustness means that these materials persist in the environment with very slow degradation over long periods of time. Balancing the benefits of material performance with sustainability is a challenge in need of novel solutions. Here, we aimed to address this challenge by incorporating boronic acid-amine complexes into epoxy thermoset chemistries, facilitating degradation of the material under pH neutral to alkaline conditions; in this scenario, water acts as an initiator to remove boron species, creating a porous structure with an enhanced surface area that makes the material more amenable to environmental degradation. Furthermore, the expulsion of the boron leaves the residual pores rich in amines which can be exploited for CO2 absorption or other functionalization. We demonstrated the formation of novel boron species from neat mixing of amine compounds with boric acid, including one complex that appears highly stable under nitrogen atmosphere up to 600 °C. While degradation of the materials under static, alkaline conditions (our “trigger”) was inconclusive at the time of this writing, dynamic conditions appeared more promising. Additionally, we showed that increasing boronic acid content created materials more resistant to thermal degradation, thus improving performance under typical high temperature use conditions.

More Details
TYPE Other Report YEAR 2021
DOIOSTI

U.S. Domestic Pebble Bed Reactor: Security-by-Design

Evans, Alan S.

U.S. nuclear power facilities face increasing challenges in meeting dynamic security requirements caused by evolving and expanding threats while keeping cost reasonable to make nuclear energy competitive. The past approach has often included implementing security features after a facility has been designed and without attention to optimization, which can lead to cost overruns. Incorporating security in the design process can provide robust, cost effective, and sufficient physical protection systems. The purpose of this work is both to develop a framework for the integration of security into the design phase of High Temperature Gas Reactors (HTGRs) that utilize pebble-based fuels and increase the use of modeling and simulation tools to optimize the design of physical protection systems. Specifically, this effort focuses on integrating security into the design phase of a model HTGR that meets current Nuclear Regulatory Commission (NRC) physical protection requirements and providing advanced solutions to improve physical protection and decrease costs. A suite of tools, including SCRIBE3D©, PATHTRACE© and Blender© were used to model a hypothetical, generic domestic HTGR facility. Physical protection elements such as sensors, cameras, barriers, and guard forces were added to the model based on best practices for physical protection systems. Multiple outsider sabotage scenarios were examined with four-to eight adversaries to determine security metrics. The results of this work will influence physical protection system designs and facility designs for U.S. domestic HTGRs. This work will also demonstrate how a series of experimental and modeling capabilities across the Department of Energy (DOE) Complex can impact the design of and complete Safeguards and Security by Design (SSBD) for SMRs. The conclusions and recommendations in this document may be applicable to all SMR designs.

More Details
TYPE Other Report YEAR 2021
DOIOSTI

Update to the Finite Cloud Dose Correction Factors in MACCS

Clayton, Daniel J.

In WASH - 1400, external exposure from the finite radioactive cloud (cloudshine) is calculated by assuming that the cloud is semi-infinite, the concentration of radioactive material is uniform, and by using a correction factor to account for these approximations. This correction factor is originally based upon formulations by Healy and depends on the effective size of the plume and the distance from the plume center to the receptor. The range of the finite cloud dose correction factor table from WASH - 1400 developed using Healy formulations can be exceeded in certain situations. When the range of the table is exceeded, no extrapolation is performed; rather interpolation at the edge of the table is performed per WASH - 1400. The tabulated values of these finite cloud dose correction factors from WASH - 1400 and the interpolation at the edge of the table have been used in MACCS since its creation. An expanded table of finite cloud dose correction factors is one way to reduce the need of using interpolation at the edge of the table. The generation of an expanded finite cloud dose correction factor table for future use in MACCS is documented in this report.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

PACT Data Management Plan (V.1.0)

White, Robert; Kirsten, Perry; King, Bruce H.

The Perovskite PV Accelerator for Commercial Technology (PACT) is an independent validation center for the evaluation of perovskite PV technologies and their bankability. The center is led by Sandia National Laboratories and the National Renewable Energy Laboratory (NREL) and includes as part of its team Los Alamos National Laboratory (LANL), CFV Labs, Black and Veatch (B&V), and the Electric Power Research Institute (EPRI). The goals of the center are to: Develop and improve indoor and outdoor performance characterization methods, Develop and validate accelerated qualification testing for early failures (5-10 years), Research degradation and failure modes, Validate outdoor performance, and Provide bankability services to US perovskite PV (PSC) industry. The importance of data and data management to the success and outcomes of the PACT center is paramount. This report describes how data will be managed and protected by PACT and identifies important data management principles that will guide our approach.

More Details
TYPE Other Report YEAR 2021
DOIOSTI

Xyce Parallel Electronic Simulator Users' Guide Version 7.4

Keiter, Eric R.; Russo, Thomas V.; Schiek, Richard; Thornquist, Heidi K.; Mei, Ting; Verley, Jason C.; Sholander, Peter E.; Aadithya, Karthik V.; Schickling, Joshua D.

This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: • Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. • A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models. • Device models that are specifically tailored to meet Sandia’s needs, including some radiation-aware devices (for Sandia users only). • Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase — a message passing parallel implementation — which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Xyce™ Parallel Electronic Simulator Reference Guide (V.7.4)

Keiter, Eric R.; Russo, Thomas V.; Schiek, Richard; Thornquist, Heidi K.; Mei, Ting; Verley, Jason C.; Sholander, Peter E.; Aadithya, Karthik V.; Schickling, Joshua D.

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Enabling Particulate Materials Processing Science for High-Consequence, Small-Lot Precision Manufacturing

Bolintineanu, Dan S.; Lechman, Jeremy B.; Bufford, Daniel C.; Clemmer, Joel T.; Cooper, Marcia; Erikson, William W.; Silling, Stewart; Oliver, Michael S.; Chavez, Andres A.; Schmalbach, Kevin; Mara, Nathan A.

This Laboratory Directed Research and Development project developed and applied closely coupled experimental and computational tools to investigate powder compaction across multiple length scales. The primary motivation for this work is to provide connections between powder feedstock characteristics, processing conditions, and powder pellet properties in the context of powder-based energetic components manufacturing. We have focused our efforts on multicrystalline cellulose, a molecular crystalline surrogate material that is mechanically similar to several energetic materials of interest, but provides several advantages for fundamental investigations. We report extensive experimental characterization ranging in length scale from nanometers to macroscopic, bulk behavior. Experiments included nanoindentation of well-controlled, micron-scale pillar geometries milled into the surface of individual particles, single-particle crushing experiments, in-situ optical and computed tomography imaging of the compaction of multiple particles in different geometries, and bulk powder compaction. In order to capture the large plastic deformation and fracture of particles in computational models, we have advanced two distinct meshfree Lagrangian simulation techniques: 1.) bonded particle methods, which extend existing discrete element method capabilities in the Sandia-developed , open-source LAMMPS code to capture particle deformation and fracture and 2.) extensions of peridynamics for application to mesoscale powder compaction, including a novel material model that includes plasticity and creep. We have demonstrated both methods for simulations of single-particle crushing as well as mesoscale multi-particle compaction, with favorable comparisons to experimental data. We have used small-scale, mechanical characterization data to inform material models, and in-situ imaging of mesoscale particle structures to provide initial conditions for simulations. Both mesostructure porosity characteristics and overall stress-strain behavior were found to be in good agreement between simulations and experiments. We have thus demonstrated a novel multi-scale, closely coupled experimental and computational approach to the study of powder compaction. This enables a wide range of possible investigations into feedstock-process-structure relationships in powder-based materials, with immediate applications in energetic component manufacturing, as well as other particle-based components and processes.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Xyce™ XDM Netlist Translator User Guide (Version 2.4)

Templet, Gary J.; Ng, Garrick; Schiek, Richard; Sholander, Peter E.; Verley, Jason C.

This manual describes the installation and use of the Xyce™ XDM Netlist Translator. XDM simplifies the translation of netlists generated by commercial circuit simulator tools into Xyce-compatible netlists. XDM currently supports translation from PSpice, HSPICE, and Spectre netlists into Xyce™ netlists.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Streaming Generalized Canonical Polyadic Tensor Decompositions

Phipps, Eric T.; Johnson, Nick; Kolda, Tamara G.

In this paper, we develop a method which we call OnlineGCP for computing the Generalized Canonical Polyadic (GCP) tensor decomposition of streaming data. GCP differs from traditional canonical polyadic (CP) tensor decompositions as it allows for arbitrary objective functions which the CP model attempts to minimize. This approach can provide better fits and more interpretable models when the observed tensor data is strongly non-Gaussian. In the streaming case, tensor data is gradually observed over time and the algorithm must incrementally update a GCP factorization with limited access to prior data. In this work, we extend the GCP formalism to the streaming context by deriving a GCP optimization problem to be solved as new tensor data is observed, formulate a tunable history term to balance reconstruction of recently observed data with data observed in the past, develop a scalable solution strategy based on segregated solves using stochastic gradient descent methods, describe a software implementation that provides performance and portability to contemporary CPU and GPU architectures and integrates with Matlab for enhanced usability, and demonstrate the utility and performance of the approach and software on several synthetic and real tensor data sets.

More Details
TYPE Other Report YEAR 2021
DOIOSTI

Integrating PGAS and MPI-based Graph Analysis

Mccrary, Trevor M.; Devine, Karen; Younge, Andrew J.

This project demonstrates that Chapel programs can interface with MPI-based libraries written in C++ without storing multiple copies of shared data. Chapel is a language for productive parallel computing using global address spaces (PGAS). We identified two approaches to interface Chapel code with the MPI-based Grafiki and Trilinos libraries. The first uses a single Chapel executable to call a C function that interacts with the C++ libraries. The second uses the mmap function to allow separate executables to read and write to the same block of memory on a node. We also encapsulated the second approach in Docker/Singularity containers to maximize ease of use. Comparisons of the two approaches using shared and distributed memory installations of Chapel show that both approaches provide similar scalability and performance.

More Details
TYPE Other Report YEAR 2021
DOIOSTI

Numerical and Analytical Modeling of the Effect of Cracks on the Self-Inductance of a COTS YJ-41003-TC Toroid

Jindal, Ashish K.; Tran, Coty

COTS inductors and transformers often contain partial cracks whose effect on inductance, a key performance parameter, have not been carefully studied. In this report, the effects of both partial and complete cracks on the self-inductance of a 100 turn square cross section COTS YJ-41003-TC toroid comprised of J Material was comprehensively investigated using both analytically derived closed form expressions and 3D computational techniques employing commercial codes. Both partial (half-penny) and complete (air gap) cracks of 10 and 25 μm were investigated. The crack is defined as the physical distance between two faces of the toroid's magnetic core, such that the surface normal of either face is along the Φ-direction, in alignment with the B-field. For the purposes of validation, two different approaches were incorporated for both the analytical and numerical models. The two analytical methods are comprised of a first principles approach based on the physics of electromagnetics, as well as linear circuit theory. The former directly utilizes the integral form of Maxwell's equations while the latter exploits the interchangeable relationship between electric and magnetic circuits. Validation within the computational scheme is realized through a code-to-code comparison between commercial solvers, COMSOL Multiphysics and CST, with the former employing the Finite Element Method (FEM) and the latter the Finite Difference Time Domain (FDTD) technique. Sound agreement between all four methods (ie., two analytical and two numerical) is observed, with results indicating that only a perturbation in self-inductance occurs for the half-penny cracks, while a substantial reduction takes place for the case of complete cracks. It is important to note that even though a static μr is applied, representing the linear region of the BH curve (based on manufacturer specifications), the complete crack results still place a lower conservative bound on the inductance. This follows from the fact that even in the case of a half-penny crack, if the magnetic core portion of the crack approaches saturation, the crack begins to behave like an air gap, or complete crack. When an air gap is introduced into a magnetic core, a substantial reduction in inductance can occur due to the significant difference in permeabilities between the two mediums (ie., μcore >> μair ). The once intact bulk magnetic core of the toroid essentially begins to behave like an air core.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

An X-ray Intensity Operations Monitor (AXIOM) (Final LDRD Project Report)

Ulmen, Ben; Webb, Timothy J.; Radtke, Gregg A.; Olson, Aaron; Depriest, Kendall R.; Coffey, Sean; Looker, Quinn M.; Gao, Xujiao; Nicholas, Ryder J.; Edwards, Jarrod D.; Mccourt, Andrew L.; Bell, K.

The Saturn accelerator has historically lacked the capability to measure time-resolved spectra for its 3-ring bremsstrahlung x-ray source. This project aimed to create a spectrometer called AXIOM to provide this capability. The project had three major development pillars: hardware, simulation, and unfold code. The hardware consists of a ring of 24 detectors around an existing x-ray pinhole camera. The diagnostic was fielded on two shots at Saturn and over 100 shots at the TriMeV accelerator at Idaho Accelerator Center. A new Saturn x-ray environment simulation was created using measured data to validate. This simulation allows for timeresolved spectra computation to compare the experimental results. The AXIOM-Unfold code is a new parametric unfold code using modern global optimizers and uncertainty quantification. The code was written in Python, uses Gitlab version control and issue tracking, and has been developed with long term code support and maintenance in mind.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI
Results 11601–11800 of 101,000
Results 11601–11800 of 101,000
Top