Publications

Johnston, Mark D.; Jordan, Nicholas M.; Cuneo, M.E.; Laity, George R.; McBride, Ryan D.; Smith, Trevor S.

Abstract not provided.

Hines, Nathan H.; Patel, Sonal P.; Scoglietti, Daniel S.; Dwyer, Robert D.; Gilmore, Mark A.; Armstrong, Darrell J.; Bliss, David E.; Laity, George R.; Cuneo, M.E.

Abstract not provided.

Bennett, Nichelle L.; Welch, Dale R.; Laity, George R.; Cuneo, M.E.

Abstract not provided.

Johnston, Mark D.; Jordan, Nicholas M.; Cuneo, M.E.; Laity, George R.; McBride, Ryan D.; Smith, Trevor J.

Abstract not provided.

Lamppa, Derek C.; Simpson, Sean S.; Hutsel, Brian T.; Cuneo, M.E.; Laity, George R.; Rose, David R.

The Z Machine at Sandia National Laboratories uses current pulses with peaks up to 27 MA to drive target implosions and generate high energy density conditions of interest for stockpile stewardship programs pertinent to the NNSA program portfolio . Physical processes in the region near the Z Machine target create electrode plasmas which seed parasitic current loss that reduce the performance and output of a Z experiment. Electrode surface contaminants (hydrogen, water, hydrocarbons) are thought to be the primary constituent of electrode plasmas which contribute to loss mechanisms. The Sandia team explore d in situ heating and plasma discharge techniques by integrating requisite infrastructure into Sandia's Mykonos LTD accelerator, addressing potential impacts to accelerator operation, and reporting on the impact of these techniques on electrode plasma formation and shot performance. The in situ discharge cleaning utilizes the electrodes of the accelerator to excite an argon-oxygen plasma to sputter and chemically react contaminants from electrode surfaces. Insulating breaks are required to isolate the plasma in electrode regions where loss processes are most likely to occur. The shots on Mykonos validate that these breaks do not perturb experiment performance, reducing the uncertainty on the largest unknown about the in situ cleaning system. Preliminary observations with electrical and optical diagnostics suggest that electrode plasma formation is delayed, and overall inventory has been substantively reduced. In situ heating embeds cartridge heaters into accelerator electrodes and employs a thermal bakeout to rapidly desorb contaminants from electrode surfaces. For the first time, additively manufactured (AM) electrode assemblies were used on a low impedance accelerator to integrate cooling channels and manage thermal gradients. Challenges with poor supplier fabrication to specifications, load alignment, thermal expansion and hardware movement and warpage appears to have introduced large variability in observed loss, though, preventing strong assertions of loss reduction via in situ heating. At this time, an in situ discharge cleaning process offers the lowest risk path to reduce electrode contaminant inventories on Z, though we recommend continuing to develop both approaches. Additional engineering and testing are required to improve the implementation of both systems. .

Bennett, Nichelle L.; Welch, Dale R.; Laity, George R.

Abstract not provided.

Welch, Dale R.; Watson, Eric D.; Bennett, Nichelle L.; Laity, George R.; LeChien, Keith R.; Tummel, Kurt T.

Abstract not provided.

Laity, George R.

Abstract not provided.

Johnston, Mark D.; Jordan, Nicholas M.; Cuneo, M.E.; Laity, George R.; McBride, Ryan D.; Smith, Trevor J.

Abstract not provided.

Laity, George R.; Robinson, Allen C.; Cuneo, M.E.; Alam, Mary K.; Beckwith, Kristian B.; Bennett, Nichelle L.; Bettencourt, Matthew T.; Bond, Stephen D.; Cochrane, Kyle C.; Criscenti, Louise C.; Cyr, Eric C.; De Zetter, Karen J.; Drake, Richard R.; Evstatiev, Evstati G.; Fierro, Andrew S.; Gardiner, Thomas A.; Glines, Forrest W.; Goeke, Ronald S.; Hamlin, Nathaniel D.; Hooper, Russell H.; Koski, Jason K.; Lane, James M.; Larson, Steven R.; Leung, Kevin L.; McGregor, Duncan A.; Miller, Philip R.; Miller, Sean M.; Ossareh, Susan J.; Phillips, Edward G.; Simpson, Sean S.; Sirajuddin, David S.; Smith, Thomas M.; Swan, Matthew S.; Thompson, Aidan P.; Tranchida, Julien G.; Bortz-Johnson, Asa J.; Welch, Dale R.; Russell, Alex M.; Watson, Eric D.; Rose, David V.; McBride, Ryan D.

This report describes the high-level accomplishments from the Plasma Science and Engineering Grand Challenge LDRD at Sandia National Laboratories. The Laboratory has a need to demonstrate predictive capabilities to model plasma phenomena in order to rapidly accelerate engineering development in several mission areas. The purpose of this Grand Challenge LDRD was to advance the fundamental models, methods, and algorithms along with supporting electrode science foundation to enable a revolutionary shift towards predictive plasma engineering design principles. This project integrated the SNL knowledge base in computer science, plasma physics, materials science, applied mathematics, and relevant application engineering to establish new cross-laboratory collaborations on these topics. As an initial exemplar, this project focused efforts on improving multi-scale modeling capabilities that are utilized to predict the electrical power delivery on large-scale pulsed power accelerators. Specifically, this LDRD was structured into three primary research thrusts that, when integrated, enable complex simulations of these devices: (1) the exploration of multi-scale models describing the desorption of contaminants from pulsed power electrodes, (2) the development of improved algorithms and code technologies to treat the multi-physics phenomena required to predict device performance, and (3) the creation of a rigorous verification and validation infrastructure to evaluate the codes and models across a range of challenge problems. These components were integrated into initial demonstrations of the largest simulations of multi-level vacuum power flow completed to-date, executed on the leading HPC computing machines available in the NNSA complex today. These preliminary studies indicate relevant pulsed power engineering design simulations can now be completed in (of order) several days, a significant improvement over pre-LDRD levels of performance.

Sirajuddin, David S.; Bettencourt, Matthew T.; Phillips, Edward G.; McGregor, Duncan A.; Roberds, Nicholas R.; Bennett, Nichelle L.; Laity, George R.; Rose, David V.; Welch, Dale R.

Abstract not provided.

Bennett, Nichelle L.; Welch, Dale R.; Rose, David V.; Laity, George R.; Cuneo, M.E.

Abstract not provided.

Fulford, Karin W.; Patel, Sonal P.; Laity, George R.

Abstract not provided.

Bennett, Nichelle L.; Welch, Dale R.; Rose, David V.; Laity, George R.; Cuneo, M.E.

Abstract not provided.

Bennett, Nichelle L.; Welch, Dale R.; Rose, David V.; Jennings, Christopher A.; Laity, George R.; Cuneo, M.E.

Abstract not provided.

Patel, Sonal P.; Johnston, Mark D.; Laity, George R.; Bliss, David E.; Macrunnels, K.A.; Scoglietti, Daniel S.; Cuneo, M.E.

Abstract not provided.

Bennett, Nichelle L.; Welch, Dale R.; Rose, David V.; Jennings, Christopher A.; Yu, Edmund Y.; Laity, George R.; Hutsel, Brian T.; Moore, James M.; Peterson, Kyle J.; Cuneo, M.E.

Abstract not provided.

Laity, George R.

Abstract not provided.

Bennett, Nichelle L.; Welch, Dale R.; Rose, David V.; Jennings, Christopher A.; Yu, Edmund Y.; Laity, George R.; Hutsel, Brian T.

Abstract not provided.

Laity, George R.

Abstract not provided.

Cuneo, M.E.; Laity, George R.; Robinson, Allen C.; Gardiner, Thomas A.; Bettencourt, Matthew T.; Shadid, John N.; Cyr, Eric C.; Hansen, Glen H.; Myers, Clayton E.; Peterson, Kyle J.; Leung, Kevin L.; Welch, Dale R.; Rose, David V.; McBride, Ryan D.; Sinars, Daniel S.

Abstract not provided.

Gomez, Matthew R.; Yager-Elorriaga, David A.; Myers, Clayton E.; Slutz, Stephen A.; Weis, Matthew R.; Jennings, Christopher A.; Lamppa, Derek C.; Harvey-Thompson, Adam J.; Geissel, Matthias G.; Knapp, Patrick K.; Harding, Eric H.; Hansen, Stephanie B.; Mangan, Michael M.; Ruiz, Carlos L.; Chandler, Gordon A.; Webb, Timothy J.; Moore, Thomas M.; Laity, George R.; Ampleford, David A.; Peterson, Kyle J.; Rochau, G.A.; Sinars, Daniel S.

Abstract not provided.

Fierro, Andrew S.; Yee, Benjamin T.; Hopkins, Matthew M.; Robinson, Allen C.; Laity, George R.

Abstract not provided.

Laity, George R.

Abstract not provided.

Gomez, Matthew R.; Yager-Elorriaga, David A.; Myers, Clayton E.; Slutz, Stephen A.; Weis, Matthew R.; Jennings, Christopher A.; Lamppa, Derek C.; Harvey-Thompson, Adam J.; Geissel, Matthias G.; Knapp, Patrick K.; Harding, Eric H.; Hansen, Stephanie B.; Mangan, Michael M.; Ruiz, Carlos L.; Chandler, Gordon A.; Hahn, Kelly D.; Webb, Timothy J.; Moore, Thomas M.; Laity, George R.; Ampleford, David A.; Peterson, Kyle J.; Rochau, G.A.; Sinars, Daniel S.

Abstract not provided.