Publications

Sassani, David C.; Price, Laura L.; Brady, Patrick V.

Abstract not provided.

Mendez Cruz, Carmen M.; Wilson, Mollye C.; Brady, Patrick V.

Abstract not provided.

Mendez Cruz, Carmen M.; Wilson, Mollye C.; Brady, Patrick V.

Abstract not provided.

Middleton, Bobby M.; Brady, Patrick V.; Lawless, Serafina L.

Abstract not provided.

Middleton, Bobby M.; Brady, Patrick V.; Brown, Jeffrey A.; Lawless, Serafina L.

Abstract not provided.

Middleton, Bobby M.; Brady, Patrick V.; Lawles, Serafina L.

Abstract not provided.

Brady, Patrick V.; Heneman, Helmuth J.

Abstract not provided.

Freeze, Geoffrey A.; Sassani, David C.; Brady, Patrick V.; Hardin, Ernest H.; Mallants, Dirk M.

Abstract not provided.

Weck, Philippe F.; Brady, Patrick V.; Criscenti, Louise C.; Fluke, Nichole L.; Gelbard, Fred G.; Padilla, Mekalah P.; Price, Laura L.; Prouty, Jeralyn L.; Rechard, Robert P.; Rigali, Mark J.; Rogers, Ralph D.; Sanchez, Amanda C.; Sassani, David C.; Tillman, Jackie B.; Walkow, Walter M.

This report represents completion of milestone deliverable M2SF-21SN010309012 “Annual Status Update for OWL and Waste Form Characteristics” that provides an annual update on status of fiscal year (FY 2020) activities for the work package SF-20SN01030901 and is due on January 29, 2021. The Online Waste Library (OWL) has been designed to contain information regarding United States (U.S.) Department of Energy (DOE)-managed (as) high-level waste (DHLW), spent nuclear fuel (SNF), and other wastes that are likely candidates for deep geologic disposal, with links to the current supporting documents for the data (when possible; note that no classified or official-use-only (OUO) data are planned to be included in OWL). There may be up to several hundred different DOE-managed wastes that are likely to require deep geologic disposal. This draft report contains versions of the OWL model architecture for vessel information (Appendix A) and an excerpt from the OWL User’s Guide (Appendix B and SNL 2020), which are for the current OWL Version 2.0 on the Sandia External Collaboration Network (ECN).

Freeze, Geoffrey A.; Sassani, David C.; Brady, Patrick V.; Hardin, Ernest H.; Mallants, Dirk M.

Abstract not provided.

American Society of Mechanical Engineers, Power Division (Publication) POWER

Middleton, Bobby M.; Brady, Patrick V.; Brown, Jeffrey A.; Lawles, Serafina T.

Water management has become critical for thermoelectric power generation in the US. Increasing demand for scarce water resources for domestic, agricultural, and industrial use affects water availability for power plants. In particular, the population in the Southwestern part of the US is growing and water resources are over-stressed. The engineering and management teams at the Palo Verde Generating Station (PV) in the Sonoran Desert have long understood this problem and began a partnership with Sandia National Laboratories in 2017 to develop a long-Term water strategy for PV. As part of this program, Sandia and Palo Verde staff have developed a comprehensive software tool that models all aspects of the PV (plant cooling) water cycle. The software tool the Palo Verde Water Cycle Model (PVWCM) tracks water operations from influent to the plant through evaporation in one of the nine cooling towers or one of the eight evaporation ponds. The PVWCM has been developed using a process called System Dynamics. The PVWCM is developed to allow scenario comparison for various plant operating strategies.

Price, Laura L.; Alsaed, Halim A.; Barela, Amanda C.; Brady, Patrick V.; Gelbard, Fred G.; Gross, Mike G.; Nole, Michael A.; Prouty, Jeralyn L.; Banerjee, Kaushik B.; Bhatt, S.B.; Davidson, Greg D.; Fang, Zheng F.; Howard, Rob H.; Johnson, S J.; Painter, Scott P.; Swinney, Mathew S.; Gonzalez, Evan G.

One of the objectives of the United States (U.S.) Department of Energy's (DOE) Office of Nuclear Energy's Spent Fuel and Waste Science and Technology Campaign is to better understand the technical basis, risks, and uncertainty associated with the safe and secure disposition of spent nuclear fuel (SNF) and high-level radioactive waste. Commercial nuclear power generation in the U.S. has resulted in thousands of metric tons of SNF, the disposal of which is the responsibility of the DOE (Nuclear Waste Policy Act 1982). Any repository licensed to dispose the SNF must meet requirements regarding the longterm performance of that repository. For an evaluation of the long-term performance of the repository, one of the events that may need to be considered is the SNF achieving a critical configuration. Of particular interest is the potential behavior of SNF in dual-purpose canisters (DPCs), which are currently being used to store and transport SNF but were not designed for permanent geologic disposal. A two-phase study has been initiated to begin examining the potential consequences, with respect to longterm repository performance, of criticality events that might occur during the postclosure period in a hypothetical repository containing DPCs. Phase I, a scoping phase, consisted of developing an approach intended to be a starting point for the development of the modeling tools and techniques that may eventually be required either to exclude criticality from or to include criticality in a performance assessment (PA) as appropriate; Phase I is documented in Price et al. (2019). The Phase I approach guided the analyses and simulations done in Phase II to further the development of these modeling tools and techniques as well as the overall knowledge base. The purpose of this report is to document the results of the analyses conducted during Phase II. The remainder of Section 1 presents the background, objective, and scope of this report, as well as the relevant key assumptions used in the Phase II analyses and simulations. Subsequent sections discuss the analyses that were conducted (Section 2), the results of those analyses (Section 3), and the summary and conclusions (Section 4). This report fulfills the Spent Fuel and Waste Science and Technology Campaign deliverable M2SF-20SN010305061.

Mallants, Dirk M.; Bonano, Evaristo J.; Freeze, Geoffrey A.; Brady, Patrick V.; Sassani, David C.

Abstract not provided.

Brady, Patrick V.; Hanson, Brady D.

This report provides an analysis of the clad barrier function associated with the direct disposal of dual purpose canisters (DPCs) under hypothetical conditions in a shale repository and in an alluvial repository, including the effect of a postulated criticality event inside a disposed DPC. Should a postulated criticality event occur in a hypothetical shale repository, cladding will primarily degrade by general corrosion. Stress corrosion cracking, hydride cracking, creep failure, pitting and crevice corrosion, rod pressurization, and clad unzipping are calculated to have little impact on cladding persistence. At the higher temperature expected during a postulated criticality event in a saturated shale repository, general corrosion of cladding would be rapid - on the order of 0.034 microns/yr. A few hundred years after onset of a postulated criticality event in a shale repository complete general corrosion of fuel assembly grid spacer walls and guide tubes will likely result in settling of fuel rods upon each other. This rod consolidation should displace the water moderator and possibly terminate a postulated criticality. The primary potential degradation pathway for cladding in a hypothetical alluvial repository is localized corrosion by fluoride, which cannot occur in a shale repository. Fluoride-enhanced corrosion of cladding would be accelerated under the slightly higher (< 100°C) temperatures associated with a postulated criticality event. The impact of criticality in both cases (shale and alluvial) would be to increase the amount of failed cladding. But it would require very specialized transport pathways.

Advances in Colloid and Interface Science

Tetteh, Joel T.; Brady, Patrick V.; Barati Ghahfarokhi, Reza

This review analyses the fundamental thermodynamic theory of the crude oil-brine-rock (COBR) interface and the underlying rock-brine and oil-brine interactions. The available data are then reviewed to outline potential mechanisms responsible for increased oil recovery from low salinity waterflooding (LSWF). We propose an approach to studying LSWF and identify the key missing links that are needed to explain observations at multiple length scales. The synergistic effect of LSWF on other chemical enhanced oil recovery methods such as surfactant, alkaline, nanoparticle and polymer flooding are also outlined. We specifically highlight key uncertainties that must be overcome to fully implement the technique in the field.

Mallants, Dirk M.; Bonano, Evaristo J.; Freeze, Geoffrey A.; Brady, Patrick V.; Sassani, David C.

Abstract not provided.

Brady, Patrick V.; Middleton, Bobby M.

Abstract not provided.

Energy and Fuels

Tetteh, Joel T.; Veisi, Masoumeh; Brady, Patrick V.; Barati Ghahfarokhi, Reza

Low-salinity waterflooding (LSWF) has proven to improve oil recovery in carbonate formations through rock wettability alteration, although the underlying mechanism remains elusive. Multivalent ionic exchange and calcite dissolution have usually been investigated using geochemical analysis in secondary coreflooding. In this work, coreflooding, in tertiary mode, coupled with a surface reactivity analysis approach was employed to investigate the interplay of wettability alteration mechanisms such as mineral dissolution, electrostatic bond attraction, and the effect of pH at in situ conditions. Improved oil recovery (IOR) in tertiary mode observed by coreflooding in Indiana limestone rocks showed an ionic strength dependence, that is, reducing brine ionic strength resulted in an increase in oil recovery. Coreflooding results showed that the seawater and low-salinity brines deprived of Mg2+ ions resulted in the lowest IOR in tertiary mode, indicating the significance of Mg2+ on IOR in limestone rocks. Similar results were observed through the contact angle measurement showing the limestone rock wettability state dependence on ionic strength and the effect of Mg2+ ions. Surface reactivity analysis showed an increase in solution pH, Ca2+ and Mg2+ ions concentration in the effluent solution from the coreflooding in tertiary mode using low salinity brines (about 40 and 20% increase in the effluent composition for Ca2+ and Mg2+, respectively). These changes in solution composition were used to calculate the in situ oil-brine and rock-brine zeta potential using a validated surface complexation model, showing the changes of zeta potential as brine is injected into limestone rocks. The results show that using seawater-like brine in tertiary mode resulted in no mineral dissolution or ionic exchange. However, improved oil recovery (IOR) using such seawater-like brine was due to wettability alteration caused by reduced electrostatic bond attraction associated with Mg2+ ions [from 2.6 × 10-13 (mol/m2)2 for formation water salinity to 1.5 × 10-13 (mol/m2)2 for seawater salinity]. Using low-salinity brines in tertiary mode improved oil recovery by mineral dissolution, resulting in oil desorption and an increase in solution pH. The increase in solution pH also resulted in reduced electrostatic bond attraction which lead to rock wettability alteration using low-salinity brines.

Middleton, Bobby M.; Brady, Patrick V.; Lawles, Serafina S.

Abstract not provided.

Price, Laura L.; Alsaed, Halim A.; Barela, Amanda C.; Brady, Patrick V.; Gelbard, Fred G.; Gross, Mike G.; Nole, Mike N.; Prouty, Jeralyn L.

Abstract not provided.

Sassani, David C.; Brady, Patrick V.; Criscenti, Louise C.; Fluke, Nichole L.; Gelbard, Fred G.; Padilla, Mekalah P.; Price, Laura L.; Prouty, Jeralyn L.; Rechard, Robert P.; Rigali, Mark J.; Rogers, Ralph D.; Hernandez-Sanchez, Bernadette A.; Tillman, Jackie B.; Walkow, Walter M.; Weck, Philippe F.

This report represents completion of milestone deliverable M2SF-19SNO10309013 "Online Waste Library (OWL) and Waste Forms Characteristics Annual Report" that reports annual status on fiscal year (FY) 2019 activities for the work package SF-19SN01030901 and is due on August 2, 2019. The online waste library (OWL) has been designed to contain information regarding United States (U.S.) Department of Energy (DOE)-managed (as) high-level waste (DHLW), spent nuclear fuel (SNF), and other wastes that are likely candidates for deep geologic disposal, with links to the current supporting documents for the data (when possible; note that no classified or official-use-only (OUO) data are planned to be included in OWL). There may be up to several hundred different DOE-managed wastes that are likely to require deep geologic disposal. This annual report on FY2019 activities includes evaluations of waste form characteristics and waste form performance models, updates to the OWL development, and descriptions of the management processes for the OWL. Updates to the OWL include an updated user's guide, additions to the OWL database content for wastes and waste forms, results of the beta testing and changes implemented from it. Also added are descriptions of the management/control processes for the OWL development, version control, and archiving. These processes have been implemented as part of the full production release of OWL (i.e., OWL Version 1.0), which has been developed on, and will be hosted and managed on, Sandia National Laboratories (SNL) systems. The version control/update processes will be implemented for updates to the OWL in the future. Additionally, another process covering methods for interfacing with the DOE SNF Database (DOE 2007) at Idaho National Laboratory on the numerous entries for DOE-managed SNF (DSNF) has been pushed forward by defining data exchanges and is planned to be implemented sometime in FY2020. The INL database is also sometimes referred to as the Spent Fuel Database or the SFDB, which is the acronym that will be used in this report. Once fully implemented, this integration effort will serve as a template for interfacing with additional databases throughout the DOE complex.

Sassani, David C.; Lopez, Carlos M.; Brady, Patrick V.; Kuhlman, Kristopher L.; Jove Colon, Carlos F.

Abstract not provided.

Energies

Freeze, Geoffrey A.; Stein, Emily S.; Brady, Patrick V.; Sassani, David C.; Travis, Karl; Gibb, Fergus; Beswick, John

The safety case for deep borehole disposal of nuclear wastes contains a safety strategy, an assessment basis, and a safety assessment. The safety strategy includes strategies for management, siting and design, and assessment. The assessment basis considers site selection, pre-closure, and post-closure, which includes waste and engineered barriers, the geosphere/natural barriers, and the biosphere and surface environment. The safety assessment entails a pre-closure safety analysis, a post-closure performance assessment, and confidence enhancement analyses. This paper outlines the assessment basis and safety assessment aspects of a deep borehole disposal safety case. The safety case presented here is specific to deep borehole disposal of Cs and Sr capsules, but is generally applicable to other waste forms, such as spent nuclear fuel. The safety assessments for pre-closure and post-closure are briefly summarized from other sources; key issues for confidence enhancement are described in greater detail. These confidence enhancement analyses require building the technical basis for geologically old, reducing, highly saline brines at the depth of waste emplacement, and using reactive-transport codes to predict their movement in post-closure. The development and emplacement of borehole seals above the waste emplacement zone is also important to confidence enhancement.

Freeze, Geoffrey A.; Stein, Emily S.; Brady, Patrick V.; Lopez, Carlos M.; Sassani, David C.; Travel, Karl T.; Gibb, Fergus G.

This report describes the current status of the safety case for the deep borehole disposal (DBD) concept. It builds on the safety case presented in Freeze et al. (2016), presenting new information and identifying additional information needs for specific safety case elements. At this preliminary phase of development, the DBD safety case focuses on the generic feasibility of the DBD concept. It is based on potential system designs, waste forms, engineering, and geologic conditions; however, no specific site or regulatory framework exists. Updated information is provided for the following safety case elements: * pre-closure basis and safety analysis, * post-closure basis and performance assessment, and * confidence enhancement. This research was performed as part of the deep borehole field test (DBFT). Based on revised U.S. Department of Energy (DOE) priorities in mid-2017, the DBFT and other research related to a DBD option was discontinued; ongoing work and documentation were closed out by the end of fiscal year (FY) 2017. This report was initiated as part of the DBFT and documented as an incomplete draft at the end of FY 2017. The report was finalized by Sandia National Laboratories in FY2018 without DOE funding, subsequent to the termination of the DBFT, and published in FY2019. iii

Energies

Freeze, Geoffrey A.; Stein, Emily S.; Brady, Patrick V.

Post-closure performance assessment (PA) calculations suggest that deep borehole disposal of cesium (Cs)/strontium (Sr) capsules, a U.S. Department of Energy (DOE) waste form (WF), is safe, resulting in no releases to the biosphere over 10,000,000 years when the waste is placed in a 3-5 km deep waste disposal zone. The same is true when a hypothetical breach of a stuck waste package (WP) is assumed to occur at much shallower depths penetrated by through-going fractures. Cs and Sr retardation in the host rock is a key control over movement. Calculated borehole performance would be even stronger if credit was taken for the presence of the WP.