We present a new algorithm for infinite-dimensional optimization with general constraints, called ALESQP. In short, ALESQP is an augmented Lagrangian method that penalizes inequality constraints and solves equality-constrained nonlinear optimization subproblems at every iteration. The subproblems are solved using a matrix-free trust-region sequential quadratic programming (SQP) method that takes advantage of iterative, i.e., inexact linear solvers, and is suitable for large-scale applications. A key feature of ALESQP is a constraint decomposition strategy that allows it to exploit problem-specific variable scalings and inner products. We analyze convergence of ALESQP under different assumptions. We show that strong accumulation points are stationary. Consequently, in finite dimensions ALESQP converges to a stationary point. In infinite dimensions we establish that weak accumulation points are feasible in many practical situations. Under additional assumptions we show that weak accumulation points are stationary. We present several infinite-dimensional examples where ALESQP shows remarkable discretization-independent performance in all of its iterative components, requiring a modest number of iterations to meet constraint tolerances at the level of machine precision. Also, we demonstrate a fully matrix-free solution of an infinite-dimensional problem with nonlinear inequality constraints.
Geomagnetic disturbances (GMDs) give rise to geomagnetically induced currents (GICs) on the earth's surface which find their way into power systems via grounded transformer neutrals. The quasi-dc nature of the GICs results in half-cycle saturation of the power grid transformers which in turn results in transformer failure, life reduction, and other adverse effects. Therefore, transformers need to be more resilient to dc excitation. This paper sets forth dc immunity metrics for transformers. Furthermore, this paper sets forth a novel transformer architecture and a design methodology which employs the dc immunity metrics to make it more resilient to dc excitation. This is demonstrated using a time-stepping 2D finite element analysis (FEA) simulation. It was found that a relatively small change in the core geometry significantly increases transformer resiliency with respect to dc excitation.
Molten Salt Reactor (MSR) systems can be divided into two basic categories: liquid-fueled MSRs in which the fuel is dissolved in the salt, and solid-fueled systems such as the Fluoride-salt-cooled High-temperature Reactor (FHR). The molten salt provides an impediment to fission product release as actinides and many fission products are soluble in molten salt. Nonetheless, under accident conditions, some radionuclides may escape the salt by vaporization and aerosol formation, which may lead to release into the environment. We present recent enhancements to MELCOR to represent the transport of radionuclides in the salt and releases from the salt. Some soluble but volatile radionuclides may vaporize and subsequently condense to aerosol. Insoluble fission products can deposit on structures. Thermochimica, an open-source Gibbs Energy Minimization (GEM) code, has been integrated into MELCOR. With the appropriate thermochemical database, Thermochimica provides the solubility and vapor pressure of species as a function of temperature, pressure, and composition, which are needed to characterize the vaporization rate and the state of the salt with fission products. Since thermochemical databases are still under active development for molten salt systems, thermodynamic data for fission product solubility and vapor pressure may be user specified. This enables preliminary assessments of fission product transport in molten salt systems. In this paper, we discuss modeling of soluble and insoluble fission product releases in a MSR with Thermochimica incorporated into MELCOR. Separate-effects experiments performed as part of the Molten Salt Reactor Experiment in which radioactive aerosol was released are discussed as needed for determining the source term.
This is an investigation on two experimental datasets of laminar hypersonic flows, over a double-cone geometry, acquired in Calspan—University at Buffalo Research Center’s Large Energy National Shock (LENS)-XX expansion tunnel. These datasets have yet to be modeled accurately. A previous paper suggested that this could partly be due to mis-specified inlet conditions. The authors of this paper solved a Bayesian inverse problem to infer the inlet conditions of the LENS-XX test section and found that in one case they lay outside the uncertainty bounds specified in the experimental dataset. However, the inference was performed using approximate surrogate models. In this paper, the experimental datasets are revisited and inversions for the tunnel test-section inlet conditions are performed with a Navier–Stokes simulator. The inversion is deterministic and can provide uncertainty bounds on the inlet conditions under a Gaussian assumption. It was found that deterministic inversion yields inlet conditions that do not agree with what was stated in the experiments. An a posteriori method is also presented to check the validity of the Gaussian assumption for the posterior distribution. This paper contributes to ongoing work on the assessment of datasets from challenging experiments conducted in extreme environments, where the experimental apparatus is pushed to the margins of its design and performance envelopes.
Robot manipulation of the environment often uses force feedback control approaches such as impedance control. Impedance controllers can be designed to be passive and work well while coupled to a variety of dynamic environments. However, in the presence of a high gear ratio and compliance in manipulator links, non-passive system properties may result in force feedback instabilities when coupled to certain environments. This necessitates an approach that ensures stability when using impedance control methods to interact with a wide range of environments. We propose a method for improving stability and steady-state convergence of an impedance controller by using a deep neural network to map a damping impedance control parameter. In this paper, a dynamic model and impedance controlled simulated system are presented and used for analyzing the coupled dynamic behavior in worst case environments. This simulation environment is used for Nyquist analysis and closed-loop stability analysis to algorithmically determine updated impedance damping parameters that secures stability and desired performance. The deep neural network inputs utilized present impedance control parameters and environmental dynamic properties to determine an updated value of damping that improves performance. In a data set of 10,000 combinations of control parameters and environmental dynamics, 20.3% of all the cases result in instability or do not meet convergence criterion. Our deep neural network improves this and reduces instabilities and failed control performance to 2.29%. The design of the network architecture to achieve this improvement is presented and compared to other architectures with their respective performances.
Adler, James H.; He, Yunhui; Hu, Xiaozhe; Maclachlan, Scott; Ohm, Peter B.
Advanced finite-element discretizations and preconditioners for models of poroelasticity have attracted significant attention in recent years. The equations of poroelasticity offer significant challenges in both areas, due to the potentially strong coupling between unknowns in the system, saddle-point structure, and the need to account for wide ranges of parameter values, including limiting behavior such as incompressible elasticity. This paper was motivated by an attempt to develop monolithic multigrid preconditioners for the discretization developed in [C. Rodrigo et al., Comput. Methods App. Mech. Engrg, 341 (2018), pp. 467-484]; we show here why this is a difficult task and, as a result, we modify the discretization in [Rodrigo et al.] through the use of a reduced-quadrature approximation, yielding a more “solver-friendly” discretization. Local Fourier analysis is used to optimize parameters in the resulting monolithic multigrid method, allowing a fair comparison between the performance and costs of methods based on Vanka and Braess-Sarazin relaxation. Numerical results are presented to validate the local Fourier analysis predictions and demonstrate efficiency of the algorithms. Finally, a comparison to existing block-factorization preconditioners is also given.
Prescriptive approaches for the cybersecurity of digital nuclear instrumentation and control (I&C) systems can be cumbersome and costly. These considerations are of particular concern for advanced reactors that implement digital technologies for monitoring, diagnostics, and control. A risk-informed performance-based approach is needed to enable the efficient design of secure digital I&C systems for nuclear power plants. This paper presents a tiered cybersecurity analysis (TCA) methodology as a graded approach for cybersecurity design. The TCA is a sequence of analyses that align with the plant, system, and component stages of design. Earlier application of the TCA in the design process provides greater opportunity for an efficient graded approach and defense-in-depth. The TCA consists of three tiers. Tier 1 is design and impact analysis. In Tier 1 it is assumed that the adversary has control over all digital systems, components, and networks in the plant, and that the adversary is only constrained by the physical limitations of the plant design. The plant's safety design features are examined to determine whether the consequences of an attack by this cyber-enabled adversary are eliminated or mitigated. Accident sequences that are not eliminated or mitigated by security by design features are examined in Tier 2 analysis. In Tier 2, adversary access pathways are identified for the unmitigated accident sequences, and passive measures are implemented to deny system and network access to those pathways wherever feasible. Any systems with remaining susceptible access pathways are then examined in Tier 3. In Tier 3, active defensive cybersecurity architecture features and cybersecurity plan controls are applied to deny the adversary the ability to conduct the tasks needed to cause a severe consequence. Tier 3 is not performed in this analysis because of the design maturity required for this tier of analysis.
Sustainable use of water resources continues to be a challenge across the globe. This is in part due to the complex set of physical and social behaviors that interact to influence water management from local to global scales. Analyses of water resources have been conducted using a variety of techniques, including qualitative evaluations of media narratives. This study aims to augment these methods by leveraging computational and quantitative techniques from the social sciences focused on text analyses. Specifically, we use natural language processing methods to investigate a large corpus (approx. 1.8M) of newspaper articles spanning approximately 35 years (1982–2017) for insights into human-nature interactions with water. Focusing on local and regional United States publications, our analysis demonstrates important dynamics in water-related dialogue about drinking water and pollution to other critical infrastructures, such as energy, across different parts of the country. Our assessment, which looks at water as a system, also highlights key actors and sentiments surrounding water. Extending these analytical methods could help us further improve our understanding of the complex roles of water in current society that should be considered in emerging activities to mitigate and respond to resource conflicts and climate change.
This paper describes the methodology of designing a replacement blade tip and winglet for a wind turbine blade to demonstrate the potential of additive-manufacturing for wind energy. The team will later field-demonstrate this additive-manufactured, system-integrated tip (AMSIT) on a wind turbine. The blade tip aims to reduce the cost of wind energy by improving aerodynamic performance and reliability, while reducing transportation costs. This paper focuses on the design and modeling of a winglet for increased power production while maintaining acceptable structural loads of the original Vestas V27 blade design. A free-wake vortex model, WindDVE, was used for the winglet design analysis. A summary of the aerodynamic design process is presented along with a case study of a specific design.
Plasma sprays can be used to melt particles, which may be deposited on an engineered surface to apply unique properties to the part. Because of the extreme temperatures (>>3000ºC) it is desirable to conduct the process in a way to avoid melting the parts to which the coatings are being applied. A jet of ambient gas is sometimes used to deflect the hot gases, while allowing the melted particles to impact and adhere to the substrate. This is known as a plume quench. While plume quenching is done in practice, to our knowledge there have not been any studies on how to apply a plume quench, and how it may affect the flows. We have recently adapted our fire simulation tool to simulate argon plasma sprays with a variety of metal particles. Two nozzle conditions are considered, with very different gas flow and power conditions. Two particle types are considered, Tantalum and Nickel. For the model, the k-epsilon turbulence model is compared to a more dynamic TFNS turbulence model. Limited data comparisons suggest the higher-fidelity TFNS model is significantly more accurate than the k-epsilon model. Additionally, the plume quench is found to have a noticeable effect for the low inlet flow case, but minimal effect on the high flow case. This suggests the effectiveness of a quench relates to the relative momentum of the intersecting gas jets.
Manin, Julien L.; Vander Wal, Randy L.; Singh, Madhu; Bachalo, William; Payne, Greg; Howard, Robert
Carbonaceous particulate produced by a diesel engine and turbojet engine combustor are analyzed by transmission electron microscopy (TEM) for differences in nanostructure before and after pulsed laser annealing. Soot is examined between low/high diesel engine torque and low/high turbojet engine thrust. Small differences in nascent nanostructure are magnified by the action of high-temperature annealing induced by pulsed laser heating. Lamellae length distributions show occurrence of graphitization while tortuosity analyses reveal lamellae straightening. Differences in internal particle structure (hollow shells versus internal graphitic ribbons) are interpreted as due to higher internal sp3 and O-atom content under the higher power conditions with hypothesized greater turbulence and resulting partial premixing. TEM in concert with fringe analyses reveal that a similar degree of annealing occurs in the primary particles in soot from both diesel engine and turbojet engine combustors—despite the aggregate and primary size differences between these sources. Implications of these results for source identification of the combustion particulate and for laser-induced incandescence (LII) measurements of concentration are discussed with inter-instrument comparison of soot mass from both diesel and turbojet soot sources.
High penetrations of residential solar PV can cause voltage issues on low-voltage (LV) secondary networks. Distribution utility planners often utilize model-based power flow solvers to address these voltage issues and accommodate more PV installations without disrupting the customers already connected to the system. These model-based results are computationally expensive and often prone to errors. In this paper, two novel deep learning-based model-free algorithms are proposed that can predict the change in voltages for PV installations without any inherent network information of the system. These algorithms will only use the real power (P), reactive power (Q), and voltage (V) data from Advanced Metering Infrastructure (AMI) to calculate the change in voltages for an additional PV installation for any customer location in the LV secondary network. Both algorithms are tested on three datasets of two feeders and compared to the conventional model-based methods and existing model-free methods. The proposed methods are also applied to estimate the locational PV hosting capacity for both feeders and have shown better accuracies compared to an existing model-free method. Results show that data filtering or pre-processing can improve the model performance if the testing data point exists in the training dataset used for that model.
We analyze the regression accuracy of convolutional neural networks assembled from encoders, decoders and skip connections and trained with multifidelity data. Besides requiring significantly less trainable parameters than equivalent fully connected networks, encoder, decoder, encoder-decoder or decoder-encoder architectures can learn the mapping between inputs to outputs of arbitrary dimensionality. We demonstrate their accuracy when trained on a few high-fidelity and many low-fidelity data generated from models ranging from one-dimensional functions to Poisson equation solvers in two-dimensions. We finally discuss a number of implementation choices that improve the reliability of the uncertainty estimates generated by Monte Carlo DropBlocks, and compare uncertainty estimates among low-, high- and multifidelity approaches.
A high altitude electromagnetic pulse (HEMP) or other similar geomagnetic disturbance (GMD) has the potential to severely impact the operation of large-scale electric power grids. By introducing low-frequency common-mode (CM) currents, these events can impact the performance of key system components such as large power transformers. In this work, a solid-state transformer (SST) that can replace susceptible equipment and improve grid resiliency by safely absorbing these CM insults is described. An overview of the proposed SST power electronics and controls architecture is provided, a system model is developed, and the performance of the SST in response to a simulated CM insult is evaluated. Compared to a conventional magnetic transformer, the SST is found to recover quickly from the insult while maintaining nominal ac input/output behavior.
Mann, James B.; Mohanty, Debapriya P.; Kustas, Andrew K.; Stiven Puentes Rodriguez, B.; Issahaq, Mohammed N.; Udupa, Anirudh; Sugihara, Tatsuya; Trumble, Kevin P.; M'Saoubi, Rachid; Chandrasekar, Srinivasan
Machining-based deformation processing is used to produce metal foil and flat wire (strip) with suitable properties and quality for electrical power and renewable energy applications. In contrast to conventional multistage rolling, the strip is produced in a single-step and with much less process energy. Examples are presented from metal systems of varied workability, and strip product scale in terms of size and production rate. By utilizing the large-strain deformation intrinsic to cutting, bulk strip with ultrafine-grained microstructure, and crystallographic shear-texture favourable for formability, are achieved. Implications for production of commercial strip for electric motor applications and battery electrodes are discussed.
Due to their increased levels of reliability, meshed low-voltage (LV) grid and spot networks are common topologies for supplying power to dense urban areas and critical customers. Protection schemes for LV networks often use highly sensitive reverse current trip settings to detect faults in the medium-voltage system. As a result, interconnecting even low levels of distributed energy resources (DERs) can impact the reliability of the protection system and cause nuisance tripping. This work analyzes the possibility of modifying the reverse current relay trip settings to increase the DER hosting capacity of LV networks without impacting fault detection performance. The results suggest that adjusting relay settings can significantly increase DER hosting capacity on LV networks without adverse effects, and that existing guidance on connecting DERs to secondary networks, such as that contained in IEEE Std 1547-2018, could potentially be modified to allow higher DER deployment levels.
A method is presented to detect clear-sky periods for plane-of-array, time-averaged irradiance data that is based on the algorithm originally described by Reno and Hansen. We show this new method improves the state-of-the-art by providing accurate detection at longer data intervals, and by detecting clear periods in plane-of-array data, which is novel. We illustrate how accurate determination of clear-sky conditions helps to eliminate data noise and bias in the assessment of long-term performance of PV plants.
A comprehensive study of the mechanical response of a 316 stainless steel is presented. The split-Hopkinson bar technique was used to evaluate the mechanical behavior at dynamic strain rates of 500 s−1, 1500 s−1, and 3000 s−1 and temperatures of 22 °C and 300 °C under tension and compression loading, while the Drop-Hopkinson bar was used to characterize the tension behavior at an intermediate strain rate of 200 s−1. The experimental results show that the tension and compression flow stress are reasonably symmetric, exhibit positive strain rate sensitivity, and are inversely dependent on temperature. The true failure strain was determined by measuring the minimum diameter of the post-test tension specimen. The 316 stainless steel exhibited a ductile response, and the true failure strain increased with increasing temperature and decreased with increasing strain rate.
Spent nuclear fuel repository simulations are currently not able to incorporate detailed fuel matrix degradation (FMD) process models due to their computational cost, especially when large numbers of waste packages breach. The current paper uses machine learning to develop artificial neural network and k-nearest neighbor regression surrogate models that approximate the detailed FMD process model while being computationally much faster to evaluate. Using fuel cask temperature, dose rate, and the environmental concentrations of CO32−, O2, Fe2+, and H2 as inputs, these surrogates show good agreement with the FMD process model predictions of the UO2 degradation rate for conditions within the range of the training data. A demonstration in a full-scale shale repository reference case simulation shows that the incorporation of the surrogate models captures local and temporal environmental effects on fuel degradation rates while retaining good computational efficiency.
This work applies Filtered Rayleigh Scattering (FRS) for the study of shock wave/boundary layer interactions on a cone-slice-ramp geometry. As FRS measures a planar slice of the flow, the three-dimensionality of this geometry can be captured, rather than in path-integrated imaging such as schlieren. A carbon dioxide seeding system designed for the Sandia Hypersonic Wind Tunnel provides sufficient light scattering for FRS measurements. Strong background rejection in the images was achieved using a molecular gas filter, resulting in detailed visualization of flow structures within the boundary and shear layers. Images show separation and reattachment shock, as well as structures related to flow instability and transition to turbulence. A highly unsteady separation region was investigated, showing instantaneous shaping of the shock structure with turbulence.
In this work, a modular and open-source platform has been developed for integrating hybrid battery energy storage systems that are intended for grid applications. Alongside integration, this platform will facilitate testing and optimal operation of hybrid storage technologies. Here, a hardware testbed and a control software have been designed, where the former comprises commercial Lithium-iron-phosphate (LiFePO4) and Lead Acid (Pb - acid) cells, custom built Dual Active Bridge (DAB) DC-DC converters, and a commercial DC-AC conversion system. In this testbed the batteries have an operating voltage range of 11-15V, the DC-AC conversion stage has a DC link voltage of 24V, and it connects to a 208V3-φ grid. The hardware testbed can be scaled up to higher voltages. The control software is developed in Python, and the firmware for all the hardware components is developed in C. This software implements hybrid charge/discharge protocols that are suitable for each battery technology for preventing cell degradation, and perform uninter-rupted quality checks on selected battery packs. The developed platform provides flexibility, modularity, safety and economic benefits to utility-scale storage integration.
Terrain-relative autonomous navigation is a challenging task. In traditional approaches, an elevation map is carried onboard and compared to measurements of the terrain below the vehicle. These methods are computationally expensive, and it is impractical to store high-quality maps of large swaths of terrain. In this article, we generate position measurements using NeuroGrid, a recently-proposed algorithm for computing position information from terrain elevation measurements. We incorporate NeuroGrid into an inertial navigation scheme using a novel measurement rejection strategy and online covariance computation. Our results show that the NeuroGrid filter provides highly accurate state information over the course of a long trajectory.
Kramer, Thomas J.; Biehl, Erik R.; Heintzelman, Matthew B.; Blunt, Shannon D.; Steinbach, Eric D.
Spectrally shaped forms of random frequency modulation (RFM) radar waveforms have been experimentally demonstrated for a variety of implementation approaches and applications. Of these, the continuous-wave (CW) perspective is particularly interesting because it enables the prospect of very high signal dimensionality and arbitrary receive processing from a range/Doppler perspective, while also mitigating range ambiguities by avoiding repetition. Here we leverage a modification to the constant-envelope orthogonal frequency division multiplexing (CE-OFDM) framework, which was originally proposed for power-efficient communications, to realize a nonrepeating FMCW radar signal that can be represented with a compact parameterization, thereby circumventing memory constraints that could arise for some applications. Experimental loopback and open-air measurements are used to demonstrate this waveform type.
Researchers at Sandia National Laboratories, in conjunction with the Nuclear Energy Institute and Light Water Reactor Sustainability Programs, have conducted testing and analysis to reevaluate and redefine the minimum passible opening size through which a person can effectively pass and navigate. Physical testing with a representative population has been performed on both simple two-dimensional (rectangular and circular cross sections up to 91.4 cm in depth) and more complex three-dimensional (circular cross sections of longer lengths up to 9.1 m and changes in direction) opening configurations. The primary impact of this effort is to define the physical design in which an adversary could successfully pass through a potentially complex opening, as well as to define the designs in which an adversary would not be expected to successfully traverse a complex opening. These data can then be used to support risk-informed decision making.
The structure-property linkage is one of the two most important relationships in materials science besides the process-structure linkage, especially for metals and polycrystalline alloys. The stochastic nature of microstructures begs for a robust approach to reliably address the linkage. As such, uncertainty quantification (UQ) plays an important role in this regard and cannot be ignored. To probe the structure-property linkage, many multi-scale integrated computational materials engineering (ICME) tools have been proposed and developed over the last decade to accelerate the material design process in the spirit of Material Genome Initiative (MGI), notably crystal plasticity finite element model (CPFEM) and phase-field simulations. Machine learning (ML) methods, including deep learning and physics-informed/-constrained approaches, can also be conveniently applied to approximate the computationally expensive ICME models, allowing one to efficiently navigate in both structure and property spaces effortlessly. Since UQ also plays a crucial role in verification and validation for both ICME and ML models, it is important to include UQ in the picture. In this paper, we summarize a few of our recent research efforts addressing UQ aspects of homogenized properties using CPFEM in a big picture context.
Low-inertia microgrids experience significant frequency deviations compared to bulk-power systems. In such microgrids, energy storage systems (ESSs) can be a viable option to provide fast-frequency support to keep frequency variations within allowable bounds. A model predictive control (MPC)-based strategy is one of the efficient control strategies to enable fast-frequency support through ESSs. MPC provides the capability to explicitly incorporate physical constraints of the microgrid and the ESS into the control formulation while allowing signifi-cant operational flexibility. MPC allows near-optimal control by optimizing the system over a rolling horizon based on a predictive model of the system. However, the effectiveness of MPC relies on the accuracy of this predictive model. This paper proposes a data-driven system identification (SI) based approach to obtain an accurate yet computationally tractable predictive model for frequency support in microgrids. The proposed data-driven MPC is compared with the conventional MPC that utilizes a simplified transfer-function-based predictive model of the system. Results show that the data-driven MPC offers a better quality of service in terms of lower frequency deviations and rate-of-change of frequency (ROCOF).
We demonstrate the use of low-temperature grown GaAs (LT-GaAs) metasurface as an ultrafast photoconductive switching element gated with 1550 nm laser pulses. The metasurface is designed to enhance a weak two-step photon absorption at 1550 nm, enabling THz pulse detection.
Power-flow studies on the 30-MA, 100-ns Z facility at Sandia National Labs have shown that plasmas in the facility's magnetically insulated transmission lines can result in a loss of current to the load.1 During the current pulse, electrode heating causes neutral surface contaminants (water, hydrogen, hydrocarbons, etc.) to desorb, ionize, and form plasmas in the anode-cathode gap.2 Shrinking typical electrode thicknesses (∼1 cm) to thin foils (5-200 μm) produces observable amounts of plasma on smaller pulsed power drivers <1 MA).3 We suspect that as electrode material bulk thickness decreases relative to the skin depth (50-100 μm for a 100-500-ns pulse in aluminum), the thermal energy delivered to the neutral surface contaminants increases, and thus desorb faster from the current carrying surface.
Distribution systems may experience fast voltage swings in the matter of seconds from distributed energy resources, such as Wind Turbines Generators (WTG) and Photovoltaic (PV) inverters, due to their dependency on variable and intermittent wind speed and solar irradiance. This work proposes a WTG reactive power controller for fast voltage regulation. The controller is tested on a simulation model of a real distribution system. Real wind speed, solar irradiation, and load consumption data is used. The controller is based on a Reinforcement Learning Deep Deterministic Policy Gradient (DDPG) model that determines optimum control actions to avoid significant voltage deviations across the system. The controller has access to voltage measurements at all system buses. Results show that the proposed WTG reactive power controller significantly reduces system-wide voltage deviations across a large number of generation scenarios in order to comply with standardized voltage tolerances.
A challenge for TW-class accelerators, such as Sandia's Z machine, is efficient power coupling due to current loss in the final power feed. It is also important to understand how such losses will scale to larger next generation pulsed power (NGPP) facilities. While modeling is studying these power flow losses it is important to have diagnostic that can experimentally measure plasmas in these conditions and help inform simulations. The plasmas formed in the power flow region can be challenging to diagnose due to both limited lines of sight and being at significantly lower temperatures and densities than typical plasmas studied on Z. This necessitates special diagnostic development to accurately measure the power flow plasma on Z.
Multiple Input Multiple Output (MIMO) vibration testing provides the capability to expose a system to a field environment in a laboratory setting, saving both time and money by mitigating the need to perform multiple and costly large-scale field tests. However, MIMO vibration test design is not straightforward oftentimes relying on engineering judgment and multiple test iterations to determine the proper selection of response Degree of Freedom (DOF) and input locations that yield a successful test. This work investigates two DOF selection techniques for MIMO vibration testing to assist with test design, an iterative algorithm introduced in previous work and an Optimal Experiment Design (OED) approach. The iterative-based approach downselects the control set by removing DOF that have the smallest impact on overall error given a target Cross Power Spectral Density matrix and laboratory Frequency Response Function (FRF) matrix. The Optimal Experiment Design (OED) approach is formulated with the laboratory FRF matrix as a convex optimization problem and solved with a gradient-based optimization algorithm that seeks a set of weighted measurement DOF that minimize a measure of model prediction uncertainty. The DOF selection approaches are used to design MIMO vibration tests using candidate finite element models and simulated target environments. The results are generalized and compared to exemplify the quality of the MIMO test using the selected DOF.
This study investigated the durability of four high temperature coatings for use as a Gardon gauge foil coating. Failure modes and effects analysis have identified Gardon gauge foil coating as a critical component for the development of a robust flux gauge for high intensity flux measurements. Degradation of coating optical properties and physical condition alters flux gauge sensitivity, resulting in flux measurement errors. In this paper, four coatings were exposed to solar and thermal cycles to simulate real-world aging. Solar simulator and box furnace facilities at the National Solar Thermal Test Facility (NSTTF) were utilized in separate test campaigns. Coating absorptance and emissivity properties were measured and combined into a figure of merit (FOM) to characterize the optical property stability of each coating, and physical coating degradation was assessed qualitatively using microscope images. Results suggest rapid high temperature cycling did not significantly impact coating optical properties and physical state. In contrast, prolonged exposure of coatings to high temperatures degraded coating optical properties and physical state. Coatings degraded after 1 hour of exposure at temperatures above 400 °C and stabilized after 6-24 hours of exposure. It is concluded that the combination of high temperatures and prolonged exposure provide the energy necessary to sustain coating surface reactions and alter optical and physical coating properties. Results also suggest flux gauge foil coatings could benefit from long duration high temperature curing (>400 °C) prior to sensor calibration to stabilize coating properties and increase measurement reliability in high flux and high temperature applications.
Conference Record of the IEEE Photovoltaic Specialists Conference
Hobbs, William B.; Black, Chloe L.; Holmgren, William F.; Anderson, Kevin
Subhourly changes in solar irradiance can lead to energy models being biased high if realistic distributions of irradiance values are not reflected in the resource data and model. This is particularly true in solar facility designs with high inverter loading ratios (ILRs). When resource data with sufficient temporal and spatial resolution is not available for a site, synthetic variability can be added to the data that is available in an attempt to address this issue. In this work, we demonstrate the use of anonymized commercial resource datasets with synthetic variability and compare results with previous estimates of model bias due to inverter clipping and increasing ILR.
Filamentous fungi can synthesize a variety of nanoparticles (NPs), a process referred to as mycosynthesis that requires little energy input, do not require the use of harsh chemicals, occurs at near neutral pH, and do not produce toxic byproducts. While NP synthesis involves reactions between metal ions and exudates produced by the fungi, the chemical and biochemical parameters underlying this process remain poorly understood. Here, the role of fungal species and precursor salt on the mycosynthesis of zinc oxide (ZnO) NPs is investigated. This data demonstrates that all five fungal species tested are able to produce ZnO structures that can be morphologically classified into i) well-defined NPs, ii) coalesced/dissolving NPs, and iii) micron-sized square plates. Further, species-dependent preferences for these morphologies are observed, suggesting potential differences in the profile or concentration of the biochemical constituents in their individual exudates. This data also demonstrates that mycosynthesis of ZnO NPs is independent of the anion species, with nitrate, sulfate, and chloride showing no effect on NP production. Finally, these results enhance the understanding of factors controlling the mycosynthesis of ceramic NPs, supporting future studies that can enable control over the physical and chemical properties of NPs formed through this “green” synthesis method.
Previous research has provided strong evidence that CO2 and H2O gasification reactions can provide non-negligible contributions to the consumption rates of pulverized coal (pc) char during combustion, particularly in oxy-fuel environments. Fully quantifying the contribution of these gasification reactions has proven to be difficult, due to the dearth of knowledge of gasification rates at the elevated particle temperatures associated with typical pc char combustion processes, as well as the complex interaction of oxidation and gasification reactions. Gasification reactions tend to become more important at higher char particle temperatures (because of their high activation energy) and they tend to reduce pc oxidation due to their endothermicity (i.e. cooling effect). The work reported here attempts to quantify the influence of the gasification reaction of CO2 in a rigorous manner by combining experimental measurements of the particle temperatures and consumption rates of size-classified pc char particles in tailored oxy-fuel environments with simulations from a detailed reacting porous particle model. The results demonstrate that a specific gasification reaction rate relative to the oxidation rate (within an accuracy of approximately +/- 20% of the pre-exponential value), is consistent with the experimentally measured char particle temperatures and burnout rates in oxy-fuel combustion environments. Conversely, the results also show, in agreement with past calculations, that it is extremely difficult to construct a set of kinetics that does not substantially overpredict particle temperature increase in strongly oxygen-enriched N2 environments. This latter result is believed to result from deficiencies in standard oxidation mechanisms that fail to account for falloff in char oxidation rates at high temperatures.
A jet is formed from venting gases of lithium-ion batteries during thermal runaway. Heat fluxes to surrounding surfaces from vented gases are calculated with simulations of an impinging jet in a narrow gap. Heat transfer correlations for the impinging jet are used as a point of reference. Three cases of different gap sizes and jet velocities are investigated and safety hazards are assessed. Local and global safety hazard issues are addressed based on average heat flux, average temperature, and average temperature rise in a cell. The Results show that about 40% to about 70% of venting gases energy can leave the module gap where it can be transferred to other modules or causes combustion at the end of the gap if suitable conditions are satisfied. This work shows that multiple vents are needed to increase the temperatures of the other modules’ cells to go into thermal runaway. This work is a preliminary assessment for future analysis that will consider heat transfer to the adjacent modules from multiple venting events.
In recent years, high-altitude infrasound sensing has become more prolific, demonstrating an enormous value especially when utilized over regions inaccessible to traditional ground-based sensing. Similar to ground-based infrasound detectors, airborne sensors take advantage of the fact that impulsive atmospheric events such as explosions can generate low frequency acoustic waves, also known as infrasound. Due to negligible attenuation, infrasonic waves can travel over long distances, and provide important clues about their source. Here, we report infrasound detections of the Apollo detonation that was carried on 29 October 2020 as part of the Large Surface Explosion Coupling Experiment in Nevada, USA. Infrasound sensors attached to solar hot air balloons floating in the stratosphere detected the signals generated by the explosion at distances 170–210 km. Three distinct arrival phases seen in the signals are indicative of multipathing caused by the small-scale perturbations in the atmosphere. We also found that the local acoustic environment at these altitudes is more complex than previously thought.
Bao, Jichao; Lee, Jonghyun; Yoon, Hongkyu Y.; Pyrak-Nolte, Laura
Characterization of geologic heterogeneity at an enhanced geothermal system (EGS) is crucial for cost-effective stimulation planning and reliable heat production. With recent advances in computational power and sensor technology, large-scale fine-resolution simulations of coupled thermal-hydraulic-mechanical (THM) processes have been available. However, traditional large-scale inversion approaches have limited utility for sites with complex subsurface structures unless one can afford high, often computationally prohibitive, computations. Key computational burdens are predominantly associated with a number of large-scale coupled numerical simulations and large dense matrix multiplications derived from fine discretization of the field site domain and a large number of THM and chemical (THMC) measurements. In this work, we present deep-generative model-based Bayesian inversion methods for the computationally efficient and accurate characterization of EGS sites. Deep generative models are used to learn the approximate subsurface property (e.g., permeability, thermal conductivity, and elastic rock properties) distribution from multipoint geostatistics-derived training images or discrete fracture network models as a prior and accelerated stochastic inversion is performed on the low-dimensional latent space in a Bayesian framework. Numerical examples with synthetic permeability fields with fracture inclusions with THM data sets based on Utah FORGE geothermal site will be presented to test the accuracy, speed, and uncertainty quantification capability of our proposed joint data inversion method.
As the width and depth of quantum circuits implemented by state-of-the-art quantum processors rapidly increase, circuit analysis and assessment via classical simulation are becoming unfeasible. It is crucial, therefore, to develop new methods to identify significant error sources in large and complex quantum circuits. In this work, we present a technique that pinpoints the sections of a quantum circuit that affect the circuit output the most and thus helps to identify the most significant sources of error. The technique requires no classical verification of the circuit output and is thus a scalable tool for debugging large quantum programs in the form of circuits. We demonstrate the practicality and efficacy of the proposed technique by applying it to example algorithmic circuits implemented on IBM quantum machines.
This work proposes a method of designing adaptive controllers for reliable and stable operation of a Grid-Forming Inverter (GFI) during black-start. Here, the characteristic loci method has been primarily used for guiding the adaptation and tuning of the control parameters, based on a thorough sensitivity analysis of the system over a desired frequency bandwidth. The control hierarchy comprises active-reactive (P-Q) power support, voltage regulation, current control, and frequency recovery over the sequence of various events during black-starting. These events comprise energization of transformers and different types of loads, alongside post-fault recovery. The developed method has been tested in a 75 MVA inverter system, which is simulated in PSCAD®. The inverter energizes static and induction motor loads, besides transformers. This system has also been subjected to a line-ground fault for validating the robustness of the proposed adaptive control structure in post-fault recovery.
Awile, Omar; Knight, James C.; Nowotny, Thomas; Aimone, James B.; Diesmann, Markus; Schurmann, Felix
At the turn of the millennium the computational neuroscience community realized that neuroscience was in a software crisis: software development was no longer progressing as expected and reproducibility declined. The International Neuroinformatics Coordinating Facility (INCF) was inaugurated in 2007 as an initiative to improve this situation. The INCF has since pursued its mission to help the development of standards and best practices. In a community paper published this very same year, Brette et al. tried to assess the state of the field and to establish a scientific approach to simulation technology, addressing foundational topics, such as which simulation schemes are best suited for the types of models we see in neuroscience. In 2015, a Frontiers Research Topic “Python in neuroscience” by Muller et al. triggered and documented a revolution in the neuroscience community, namely in the usage of the scripting language Python as a common language for interfacing with simulation codes and connecting between applications. The review by Einevoll et al. documented that simulation tools have since further matured and become reliable research instruments used by many scientific groups for their respective questions. Open source and community standard simulators today allow research groups to focus on their scientific questions and leave the details of the computational work to the community of simulator developers. A parallel development has occurred, which has been barely visible in neuroscientific circles beyond the community of simulator developers: Supercomputers used for large and complex scientific calculations have increased their performance from ~10 TeraFLOPS (1013 floating point operations per second) in the early 2000s to above 1 ExaFLOPS (1018 floating point operations per second) in the year 2022. This represents a 100,000-fold increase in our computational capabilities, or almost 17 doublings of computational capability in 22 years. Moore's law (the observation that it is economically viable to double the number of transistors in an integrated circuit every other 18–24 months) explains a part of this; our ability and willingness to build and operate physically larger computers, explains another part. It should be clear, however, that such a technological advancement requires software adaptations and under the hood, simulators had to reinvent themselves and change substantially to embrace this technological opportunity. It actually is quite remarkable that—apart from the change in semantics for the parallelization—this has mostly happened without the users knowing. The current Research Topic was motivated by the wish to assemble an update on the state of neuroscientific software (mostly simulators) in 2022, to assess whether we can see more clearly which scientific questions can (or cannot) be asked due to our increased capability of simulation, and also to anticipate whether and for how long we can expect this increase of computational capabilities to continue.
Two relatively under-reported facets of fuel storage fire safety are examined in this work for a 250, 000 gallon two-tank storage system. Ignition probability is linked to the radiative flux from a presumed fire. First, based on observed features of existing designs, fires are expected to be largely contained within a designed footprint that will hold the full spilled contents of the fuel. The influence of the walls and the shape of the tanks on the magnitude of the fire is not a well-described aspect of conventional fire safety assessment utilities. Various resources are herein used to explore the potential hazard for a contained fire of this nature. Second, an explosive attack on the fuel storage has not been widely considered in prior work. This work explores some options for assessing this hazard. The various methods for assessing the constrained conventional fires are found to be within a reasonable degree of agreement. This agreement contrasts with the hazard from an explosive dispersal. Best available assessment techniques are used, which highlight some inadequacies in the existing toolsets for making predictions of this nature. This analysis, using the best available tools, suggests the offset distance for the ignition hazard from a fireball will be on the same order as the offset distance for the blast damage. This suggests the buy-down of risk by considering the fireball is minimal when considering the blast hazards. Assessment tools for the fireball predictions are not particularly mature, and ways to improve them for a higher-fidelity estimate are noted.
Smoke may be defined as the particulate products from fire and is composed of organics originating from unburnt fuel and soot, which is mostly carbon and is formed in the rich side of the flame. The fire community regularly measures smoke emissions using the cone calorimeter (CC) and the fire propagation analyzer (FPA) devices via laser extinction. Their measurements are conducted over the burn time of the material, generally minutes. Our high-flux exposures from concentrated solar irradiance result in emissions lasting only a few seconds. We have adapted the historical methods to our application to permit similar quantitative assessments of smoke. We illustrate here our modified procedure and present some results of the testing performed by exposing materials to concentrated solar energy. An assessment of the uncertainty in the smoke yield measurements is made. The data are expected to contribute to the body of knowledge on the emissions of smoke from ignitions caused by more unconventional initiating events involving very high heat fluxes.
Surrogate construction is an essential component for all non-deterministic analyses in science and engineering. The efficient construction of easy and cheaper-to-run alternatives to a computationally expensive code paves the way for outer loop workflows for forward and inverse uncertainty quantification and optimization. Unfortunately, the accurate construction of a surrogate still remains a task that often requires a prohibitive number of computations, making the approach unattainable for large-scale and high-fidelity applications. Multifidelity approaches offer the possibility to lower the computational expense requirement on the highfidelity code by fusing data from additional sources. In this context, we have demonstrated that multifidelity Bayesian Networks (MFNets) can efficiently fuse information derived from models with an underlying complex dependency structure. In this contribution, we expand on our previous work by adopting a basis adaptation procedure for the selection of the linear model representing each data source. Our numerical results demonstrate that this procedure is computationally advantageous because it can maximize the use of limited data to learn and exploit the important structures shared among models. Two examples are considered to demonstrate the benefits of the proposed approach: an analytical problem and a nuclear fuel finite element assembly. From these two applications, a lower dependency of MFnets on the model graph has been also observed.
We propose a set of benchmark tests for current-voltage (IV) curve fitting algorithms. Benchmark tests enable transparent and repeatable comparisons among algorithms, allowing for measuring algorithm improvement over time. An absence of such tests contributes to the proliferation of fitting methods and inhibits achieving consensus on best practices. Benchmarks include simulated curves with known parameter solutions, with and without simulated measurement error. We implement the reference tests on an automated scoring platform and invite algorithm submissions in an open competition for accurate and performant algorithms.
As the electric grid becomes increasingly cyber-physical, it is important to characterize its inherent cyber-physical interdepedencies and explore how that characterization can be leveraged to improve grid operation. It is crucial to investigate what data features are transferred at the system boundaries, how disturbances cascade between the systems, and how planning and/or mitigation measures can leverage that information to increase grid resilience. In this paper, we explore several numerical analysis and graph decomposition techniques that may be suitable for modeling these cyber-physical system interdependencies and for understanding their significance. An augmented WSCC 9-bus cyber-physical system model is used as a small use-case to assess these techniques and their ability in characterizing different events within the cyber-physical system. These initial results are then analyzed to formulate a high-level approach for characterizing cyber-physical interdependencies.
Laser absorption spectroscopy (LAS) was used to measure temperature and XH2O at a rate of 500 kHz in post-detonation fireballs of solid explosives. A 25 g hemisphere of pentaerythritol tetranitrate (PETN) was initiated with an exploding-bridgewire detonator to produce a post-detonation fireball that traveled radially toward a hardened optical probe. The probe contained a pressure transducer and the near-infrared optics needed to measure H2O absorption transitions near 7185.6 cm-1 and 6806 cm-1 using peak-picking scanned-wavelength modulation-spectroscopy with first-harmonic-normalized second-harmonic detection (scanned-WMS-2f/1f). The two lasers were scanned across the peak of an absorption line at 500 kHz and modulated at either 35 MHz for the laser near 7185.6 cm-1 or 45.5 MHz for the laser near 6806 cm-1. This enabled measurements of temperature and XH2O at 500 kHz in the shock-heated air and trailing post-detonation fireball. Time histories of pressure, temperature, and XH2O were acquired at multiple standoff distances in order to quantify the temporal evolution of these quantities in the post-detonation environment produced by PETN.
The DevOps movement, which aims to accelerate the continuous delivery of high-quality software, has taken a leading role in reshaping the software industry. Likewise, there is growing interest in applying DevOps tools and practices in the domains of computational science and engineering (CSE) to meet the ever-growing demand for scalable simulation and analysis. Translating insights from industry to research computing, however, remains an ongoing challenge; DevOps for science and engineering demands adaptation and innovation in those tools and practices. There is a need to better understand the challenges faced by DevOps practitioners in CSE contexts in bridging this divide. To that end, we conducted a participatory action research study to collect and analyze the experiences of DevOps practitioners at a major US national laboratory through the use of storytelling techniques. We share lessons learned and present opportunities for future investigation into DevOps practice in the CSE domain.
High-altitude electromagnetic pulse events are a growing concern for electric power grid vulnerability assessments and mitigation planning, and accurate modeling of surge arrester mitigations installed on the grid is necessary to predict pulse effects on existing equipment and to plan future mitigation. While some models of surge arresters at high frequency have been proposed, experimental backing for any given model has not been shown. This work examines a ZnO lightning surge arrester modeling approach previously developed for accurate prediction of nanosecond-scale pulse response. Four ZnO metal-oxide varistor pucks with different sizes and voltage ratings were tested for voltage and current response on a conducted electromagnetic pulse testbed. The measured clamping response was compared to SPICE circuit models to compare the electromagnetic pulse response and validate model accuracy. Results showed good agreement between simulation results and the experimental measurements, after accounting for stray testbed inductance between 100 and 250 nH.
Computational simulations of high-speed flow play an important role in the design of hypersonic vehicles, for which experimental data are scarce; however, high-fidelity simulations of hypersonic flow are computationally expensive. Reduced order models (ROMs) have the potential to make many-query problems, such as design optimization and uncertainty quantification, tractable for this domain. Residual minimization-based ROMs, which formulate the projection onto a reduced basis as an optimization problem, are one promising candidate for model reduction of large-scale fluid problems. This work analyzes whether specific choices of norms and objective functions can improve the performance of ROMs of hypersonic flow. Specifically, we investigate the use of dimensionally consistent inner products and modifications designed for convective problems, including ℓ1 minimization and constrained optimization statements to enforce conservation laws. Particular attention is paid to accuracy for problems with strong shocks, which are common in hypersonic flow and challenging for projection-based ROMs. We demonstrate that these modifications can improve the predictability and efficiency of a ROM, though the impact of such formulations depends on the quantity of interest and problem considered.
This presentation describes a new effort to better understand insulator flashover in high current, high voltage pulsed power systems. Both experimental and modeling investigations are described. Particular emphasis is put upon understand flashover that initiate in the anode triple junction (anode-vacuum-dielectric).
In this study, we develop an end-to-end deep learning-based inverse design approach to determine the scatterer shape necessary to achieve a target acoustic field. This approach integrates non-uniform rational B-spline (NURBS) into a convolutional autoencoder (CAE) architecture while concurrently leveraging (in a weak sense) the governing physics of the acoustic problem. By utilizing prior physical knowledge and NURBS parameterization to regularize the ill-posed inverse problem, this method does not require enforcing any geometric constraint on the inverse design space, hence allowing the determination of scatterers with potentially any arbitrary shape (within the set allowed by NURBS). A numerical study is presented to showcase the ability of this approach to identify physically-consistent scatterer shapes capable of producing user-defined acoustic fields.
The error detection performance of cyclic redundancy check (CRC) codes combined with bit framing in digital serial communication systems is evaluated. Advantages and disadvantages of the combined method are treated in light of the probability of undetected errors. It is shown that bit framing can increase the burst error detection of the CRC but it can also adversely affect CRC random error detection performance. To quantify the effect of bit framing on CRC error detection the concept of error "exposure"is introduced. Our investigations lead us to propose resilient generator polynomials that, when combined with bit framing, can result in improved CRC error detection performance at no additional implementation cost. Example results are generated for short codewords showing that proper choice of CRC generator polynomial can improve error detection performance when combined with bit framing. The implication is that CRC combined with bit framing can reduce the probability of undetected errors even under high error rate conditions.
A high altitude electromagnetic pulse (HEMP) or other similar geomagnetic disturbance (GMD) has the potential to severely impact the operation of large-scale electric power grids. By introducing low-frequency common-mode (CM) currents, these events can impact the performance of key system components such as large power transformers. In this work, a solid-state transformer (SST) that can replace susceptible equipment and improve grid resiliency by safely absorbing these CM insults is described. An overview of the proposed SST power electronics and controls architecture is provided, a system model is developed, and the performance of the SST in response to a simulated CM insult is evaluated. Compared to a conventional magnetic transformer, the SST is found to recover quickly from the insult while maintaining nominal ac input/output behavior.
With the recent surge in big data analytics for hyperdimensional data, there is a renewed interest in dimensionality reduction techniques. In order for these methods to improve performance gains and understanding of the underlying data, a proper metric needs to be identified. This step is often overlooked, and metrics are typically chosen without consideration of the underlying geometry of the data. In this paper, we present a method for incorporating elastic metrics into the t-distributed stochastic neighbour embedding (t-SNE) and Uniform Manifold Approximation and Projection (UMAP). We apply our method to functional data, which is uniquely characterized by rotations, parameterization and scale. If these properties are ignored, they can lead to incorrect analysis and poor classification performance. Through our method, we demonstrate improved performance on shape identification tasks for three benchmark data sets (MPEG-7, Car data set and Plane data set of Thankoor), where we achieve 0.77, 0.95 and 1.00 F1 score, respectively.
Creation of a Sandia internally developed, shock-hardened Recoverable Data Recorder (RDR) necessitated experimentation by ballistically-firing the device into water targets at velocities up to 5,000 ft/s. The resultant mechanical environments were very severe—routinely achieving peak accelerations in excess of 200 kG and changes in pseudo-velocity greater than 38,000 inch/s. High-quality projectile deceleration datasets were obtained though high-speed imaging during the impact events. The datasets were then used to calibrate and validate computational models in both CTH and EPIC. Hydrodynamic stability in these environments was confirmed to differ from aerodynamic stability; projectile stability is maintained through a phenomenon known as “tail-slapping” or impingement of the rear of the projectile on the cavitation vapor-water interface which envelopes the projectile. As the projectile slows the predominate forces undergo a transition which is outside the codes’ capabilities to calculate accurately, however, CTH and EPIC both predict the projectile trajectory well in the initial hypervelocity regime. Stable projectile designs and the achievable acceleration space are explored through a large parameter sweep of CTH simulations. Front face chamfer angle has the largest influence on stability with low angles being more stable.
We study both conforming and non-conforming versions of the practical DPG method for the convection-reaction problem. We determine that the most common approach for DPG stability analysis - construction of a local Fortin operator - is infeasible for the convection-reaction problem. We then develop a line of argument based on a direct proof of discrete stability; we find that employing a polynomial enrichment for the test space does not suffice for this purpose, motivating the introduction of a (two-element) subgrid mesh. The argument combines mathematical analysis with numerical experiments.
An inherited containment vessel design that has been used in the past to contain items in an environmental testing unit was brought to the Explosives Applications Lab to be analyzed and modified. The goal was to modify the vessel to contain an explosive event of 4g TNT equivalence at least once without failure or significant girth expansion while maintaining a seal. A total of ten energetic tests were performed on multiple vessels. In these tests, the 7075-T6 aluminum vessels were instrumented with thin-film resistive strain gages and both static and dynamic pressure gauges to study its ability to withstand an oversize explosive charge of 8g. Additionally, high precision girth (pi tape) measurements were taken before and after each test to measure the plastic growth of the vessel due to the event. Concurrent with this explosive testing, hydrocode modeling of the containment vessel and charge was performed. The modeling results were shown to agree with the results measured in the explosive field testing. Based on the data obtained during this testing, this vessel design can be safely used at least once to contain explosive detonations of 8g at the center of the chamber for a charge that will not result in damaging fragments.
Holography is an effective diagnostic for the three-dimensional imaging of multiphase and particle-laden flows. Traditional digital inline holography (DIH), however, is subject to distortions from phase delays caused by index-of-refraction changes. This prevents DIH from being implemented in extreme conditions where shockwaves and significant thermal gradients are present. To overcome this challenge, multiple techniques have been developed to correct for the phase distortions. In this work, several holography techniques for distortion removal are discussed, including digital off-axis holography, phase conjugate digital in-line holography, and electric field techniques. Then, a distortion cancelling off-axis holography configuration is implemented for distortion removal and a high-magnification phase conjugate system is evaluated. Finally, both diagnostics are applied to study extreme pyrotechnic igniter environments.
With increasing penetration of variable renewable generation, battery energy storage systems (BESS) are becoming important for power system stability due to their operational flexibility. In this paper, we propose a method for determining the minimum BESS rated power that guarantees security constraints in a grid subject to disturbances induced by variable renewable generation. The proposed framework leverages sensitivity-based inverse uncertainty propagation where the dynamical responses of the states are parameterized with respect to random variables. Using this approach, the original nonlinear optimization problem for finding the security-constrained uncertainty interval may be formulated as a quadratically-constrained linear program. The resulting estimated uncertainty interval is utilized to find the BESS rated power required to satisfy grid stability constraints.
Two relatively under-reported facets of fuel storage fire safety are examined in this work for a 250, 000 gallon two-tank storage system. Ignition probability is linked to the radiative flux from a presumed fire. First, based on observed features of existing designs, fires are expected to be largely contained within a designed footprint that will hold the full spilled contents of the fuel. The influence of the walls and the shape of the tanks on the magnitude of the fire is not a well-described aspect of conventional fire safety assessment utilities. Various resources are herein used to explore the potential hazard for a contained fire of this nature. Second, an explosive attack on the fuel storage has not been widely considered in prior work. This work explores some options for assessing this hazard. The various methods for assessing the constrained conventional fires are found to be within a reasonable degree of agreement. This agreement contrasts with the hazard from an explosive dispersal. Best available assessment techniques are used, which highlight some inadequacies in the existing toolsets for making predictions of this nature. This analysis, using the best available tools, suggests the offset distance for the ignition hazard from a fireball will be on the same order as the offset distance for the blast damage. This suggests the buy-down of risk by considering the fireball is minimal when considering the blast hazards. Assessment tools for the fireball predictions are not particularly mature, and ways to improve them for a higher-fidelity estimate are noted.
Creation of a Sandia internally developed, shock-hardened Recoverable Data Recorder (RDR) necessitated experimentation by ballistically-firing the device into water targets at velocities up to 5,000 ft/s. The resultant mechanical environments were very severe—routinely achieving peak accelerations in excess of 200 kG and changes in pseudo-velocity greater than 38,000 inch/s. High-quality projectile deceleration datasets were obtained though high-speed imaging during the impact events. The datasets were then used to calibrate and validate computational models in both CTH and EPIC. Hydrodynamic stability in these environments was confirmed to differ from aerodynamic stability; projectile stability is maintained through a phenomenon known as “tail-slapping” or impingement of the rear of the projectile on the cavitation vapor-water interface which envelopes the projectile. As the projectile slows the predominate forces undergo a transition which is outside the codes’ capabilities to calculate accurately, however, CTH and EPIC both predict the projectile trajectory well in the initial hypervelocity regime. Stable projectile designs and the achievable acceleration space are explored through a large parameter sweep of CTH simulations. Front face chamfer angle has the largest influence on stability with low angles being more stable.
The National Aeronautics and Space Administration’s (NASA) Artemis program seeks to establish the first long-term presence on the Moon as part of a larger goal of sending the first astronauts to Mars. To accomplish this, the Artemis program is designed to develop, test, and demonstrate many technologies needed for deep space exploration and supporting life on another planet. Long-term operations on the lunar base include habitation, science, logistics, and in-situ resource utilization (ISRU). In this paper, a Lunar DC microgrid (LDCMG) structure is the backbone of the energy distribution, storage, and utilization infrastructure. The method to analyze the LDCMG power distribution network and ESS design is the Hamiltonian surface shaping and power flow control (HSSPFC). This ISRU system will include a networked three-microgrid system which includes a Photo-voltaic (PV) array (generation) on one sub-microgrid and water extraction (loads) on the other two microgrids. A system's reduced-order model (ROM) will be used to create a closed-form analytical model. Ideal ESS devices will be placed alongside each state of the ROM. The ideal ESS devices determine the response needed to conform to a specific operating scenario and system specifications.
Multiple rotors on single structures have long been proposed to increase wind turbine energy capture with no increase in rotor size, but at the cost of additional mechanical complexity in the yaw and tower designs. Standard turbines on their own very-closely-spaced towers avoid these disadvantages but create a significant disadvantage; for some wind directions the wake turbulence of a rotor enters the swept area of a very close downwind rotor causing low output, fatigue stress, and changes in wake recovery. Knowing how the performance of pairs of closely spaced rotors varies with wind direction is essential to design a layout that maximizes the useful directions and minimizes the losses and stress at other directions. In the current work, the high-fidelity large-eddy simulation (LES) code Exa-Wind/Nalu-Wind is used to simulate the wake interactions from paired-rotor configurations in a neutrally stratified atmospheric boundary layer to investigate performance and feasibility. Each rotor pair consists of two Vestas V27 turbines with hub-to-hub separation distances of 1.5 rotor diameters. The on-design wind direction results are consistent with previous literature. For an off-design wind direction of 26.6°, results indicate little change in power and far-wake recovery relative to the on-design case. At a direction of 45.0°, significant rotor-wake interactions produce an increase in power but also in far-wake velocity deficit and turbulence intensity. A severely off-design case is also considered.
We present a design paradigm based on topological charge splitting for creating nearly-degenerate, high-quality factor (Q) states with arbitrary polarization states in all-dielectric metasurfaces.
Reinforcement learning (RL) may enable fixedwing unmanned aerial vehicle (UAV) guidance to achieve more agile and complex objectives than typical methods. However, RL has yet struggled to achieve even minimal success on this problem; fixed-wing flight with RL-based guidance has only been demonstrated in literature with reduced state and/or action spaces. In order to achieve full 6-DOF RL-based guidance, this study begins training with imitation learning from classical guidance, a method known as warm-staring (WS), before further training using Proximal Policy Optimization (PPO). We show that warm starting is critical to successful RL performance on this problem. PPO alone achieved a 2% success rate in our experiments. Warm-starting alone achieved 32% success. Warm-starting plus PPO achieved 57% success over all policies, with 40% of policies achieving 94% success.
Criticality Control Overpack (CCO) containers are being considered for the disposal of defense-related nuclear waste at the Waste Isolation Pilot Plant (WIPP).
Two-dimensional (2D) layered oxides have recently attracted wide attention owing to the strong coupling among charges, spins, lattice, and strain, which allows great flexibility and opportunities in structure designs as well as multifunctionality exploration. In parallel, plasmonic hybrid nanostructures exhibit exotic localized surface plasmon resonance (LSPR) providing a broad range of applications in nanophotonic devices and sensors. A hybrid material platform combining the unique multifunctional 2D layered oxides and plasmonic nanostructures brings optical tuning into the new level. In this work, a novel self-assembled Bi2MoO6 (BMO) 2D layered oxide incorporated with plasmonic Au nanoinclusions has been demonstrated via one-step pulsed laser deposition (PLD) technique. Comprehensive microstructural characterizations, including scanning transmission electron microscopy (STEM), differential phase contrast imaging (DPC), and STEM tomography, have demonstrated the high epitaxial quality and particle-in-matrix morphology of the BMO-Au nanocomposite film. DPC-STEM imaging clarifies the magnetic domain structures of BMO matrix. Three different BMO structures including layered supercell (LSC) and superlattices have been revealed which is attributed to the variable strain states throughout the BMO-Au film. Owing to the combination of plasmonic Au and layered structure of BMO, the nanocomposite film exhibits a typical LSPR in visible wavelength region and strong anisotropy in terms of its optical and ferromagnetic properties. This study opens a new avenue for developing novel 2D layered complex oxides incorporated with plasmonic metal or semiconductor phases showing great potential for applications in multifunctional nanoelectronics devices. [Figure not available: see fulltext.]
Extreme meteorological events, such as hurricanes and floods, cause significant infrastructure damage and, as a result, prolonged grid outages. To mitigate the negative effect of these outages and enhance the resilience of communities, microgrids consisting of solar photovoltaics (PV), energy storage (ES) technologies, and backup diesel generation are being considered. Furthermore, it is necessary to take into account how the extreme event affects the systems' performance during the outage, often referred to as black-sky conditions. In this paper, an optimization model is introduced to properly size ES and PV technologies to meet various duration of grid outages for selected critical infrastructure while considering black-sky conditions. A case study of the municipality of Villalba, Puerto Rico is presented to identify the several potential microgrid configurations that increase the community's resilience. Sensitivity analyses are performed around the grid outage durations and black-sky conditions to better decide what factors should be considered when scoping potential microgrids for community resilience.
This paper presents the ongoing development of a wireline tool designed to detect and quantify inflows from feed zones in geothermal wells based on measurement of chloride. The tool aims to characterize stimulation events in Enhanced Geothermal Systems (EGS) wells at Utah FORGE (Frontier Observatory for Research in Geothermal Energy) and other EGS sites. Successful development of the chloride tool would greatly improve production monitoring of the fractures and enable proactive prescription of additional stimulations over the life of the field, thus helping to improve EGS commercial feasibility. The recent development of the chloride tool involves an Ion Specific Electrodes (ISE) probe and a reference electrode, assembled through a labor-intensive process, and designed to withstand downhole conditions for field deployment. Through laboratory experiments and numerical simulations, the tool demonstrated efficacy in identifying changes in chloride concentration, indicating its utility in feed zone detection. However, the impact of impedance on voltage measurements and discrepancies between laboratory and simulation results presented opportunities for further refinement. Notably, simulation results consistently underestimated actual chloride concentration by 30-40%, suggesting the need for compensatory calibration. Comparisons between different simulation software indicated that ANSYS was more accurate in replicating key features observed in laboratory experiments. Moreover, a Machine Learning (ML) approach was used to improve feed zone location detection and inflow rate measurement, utilizing Random Forest and Light Gradient Boosting Machine (LGBM) models, which delivered high performance scores. Thus, the chloride tool's recent development and integration with machine learning approaches offer promising advancements in feed zone identification and quantification.
We consider the intersection between nonrepeating random FM (RFM) waveforms and practical forms of optimal mismatched filtering (MMF). Specifically, the spectrally-shaped inverse filter (SIF) is a well-known approximation to the least-squares (LS-MMF) that provides significant computational savings. Given that nonrepeating waveforms likewise require unique nonrepeating MMFs, this efficient form is an attractive option. Moreover, both RFM waveforms and the SIF rely on spectrum shaping, which establishes a relationship between the goodness of a particular waveform and the mismatch loss (MML) the corresponding filter can achieve. Both simulated and open-air experimental results are shown to demonstrate performance.
When exposed to mechanical environments such as shock and vibration, electrical connections may experience increased levels of contact resistance associated with the physical characteristics of the electrical interface. A phenomenon known as electrical chatter occurs when these vibrations are large enough to interrupt the electric signals. It is critical to understand the root causes behind these events because electrical chatter may result in unexpected performance or failure of the system. The root causes span a variety of fields, such as structural dynamics, contact mechanics, and tribology. Therefore, a wide range of analyses are required to fully explore the physical phenomenon. This paper intends to provide a better understanding of the relationship between structural dynamics and electrical chatter events. Specifically, electrical contact assembly composed of a cylindrical pin and bifurcated structure were studied using high fidelity simulations. Structural dynamic simulations will be performed with both linear and nonlinear reduced-order models (ROM) to replicate the relevant structural dynamics. Subsequent multi-physics simulations will be discussed to relate the contact mechanics associated with the dynamic interactions between the pin and receptacle to the chatter. Each simulation method was parametrized by data from a variety of dynamic experiments. Both structural dynamics and electrical continuity were observed in both the simulation and experimental approaches, so that the relationship between the two can be established.
Advancements in photonic quantum information systems (QIS) have driven the development of high-brightness, on-demand, and indistinguishable semiconductor epitaxial quantum dots (QDs) as single photon sources. Strain-free, monodisperse, and spatially sparse local-droplet-etched (LDE) QDs have recently been demonstrated as a superior alternative to traditional Stranski-Krastanov QDs. However, integration of LDE QDs into nanophotonic architectures with the ability to scale to many interacting QDs is yet to be demonstrated. We present a potential solution by embedding isolated LDE GaAs QDs within an Al0.4Ga0.6As Huygens’ metasurface with spectrally overlapping fundamental electric and magnetic dipolar resonances. We demonstrate for the first time a position- and size-independent, 1 order of magnitude increase in the collection efficiency and emission lifetime control for single-photon emission from LDE QDs embedded within the Huygens’ metasurfaces. Our results represent a significant step toward leveraging the advantages of LDE QDs within nanophotonic architectures to meet the scalability demands of photonic QIS.
The Reynolds-averaged Navier–Stokes (RANS) equations remain a workhorse technology for simulating compressible fluid flows of practical interest. Due to model-form errors, however, RANS models can yield erroneous predictions that preclude their use on mission-critical problems. This work presents a data-driven turbulence modeling strategy aimed at improving RANS models for compressible fluid flows. The strategy outlined has three core aspects: (1) prediction for the discrepancy in the Reynolds stress tensor and turbulent heat flux via machine learning (ML), (2) estimating uncertainties in ML model outputs via out-of-distribution detection, and (3) multi-step training strategies to improve feature-response consistency. Results are presented across a range of cases publicly available on NASA’s turbulence modeling resource involving wall-bounded flows, jet flows, and hypersonic boundary layer flows with cold walls. We find that one ML turbulence model is able to provide consistent improvements for numerous quantities-of-interest across all cases.