Research
Research

Publications

Results 54001–54200 of 100,993

Search results

Jump to search filters

Dish Stirling High Performance Thermal Storage FY14Q3 Quad Chart

Andraka, Charles E.

The project goals are: demonstrate the feasibility of significant thermal storage for dish Stirling systems to leverage their existing high performance to greater capacity; demonstrate key components of a latent storage and transport system enabling on-dish storage with low exergy losses; and provide technology path to a 25kWe system with 6 hours of storage.

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Thermal boundary conductance accumulation and spectral phonon transmission across interfaces: experimental measurements across metal/native oxide/Si and metal/sapphire interfaces

Nature Communications

Ihlefeld, Jon F.; Brown-Shaklee, Harlan J.; Cheaito, Ramez; Gaskins, John T.; Caplan, Matthew E.; Donovan, Brian F.; Foley, Brian M.; Giri, Ashutosh; Duda, John C.; Szwejkowski, Chester J.; Constantin, Costel; Hopkins, Patrick E.

Abstract not provided.

More Details
TYPE Journal Article YEAR 2014
OSTI

Choreographer Pre-Testing Code Analysis and Operational Testing

Fritz, David J.; Harrison, Christopher B.; Perr, C.W.; Hurd, Steven A.

Choreographer is a "moving target defense system", designed to protect against attacks aimed at IP addresses without corresponding domain name system (DNS) lookups. It coordinates actions between a DNS server and a Network Address Translation (NAT) device to regularly change which publicly available IP addresses' traffic will be routed to the protected device versus routed to a honeypot. More details about how Choreographer operates can be found in Section 2: Introducing Choreographer. Operational considerations for the successful deployment of Choreographer can be found in Section 3. The Testing & Evaluation (T&E) for Choreographer involved 3 phases: Pre-testing, Code Analysis, and Operational Testing. Pre-testing, described in Section 4, involved installing and configuring an instance of Choreographer and verifying it would operate as expected for a simple use case. Our findings were that it was simple and straightforward to prepare a system for a Choreographer installation as well as configure Choreographer to work in a representative environment. Code Analysis, described in Section 5, consisted of running a static code analyzer (HP Fortify) and conducting dynamic analysis tests using the Valgrind instrumentation framework. Choreographer performed well, such that only a few errors that might possibly be problematic in a given operating situation were identified. Operational Testing, described in Section 6, involved operating Choreographer in a representative environment created through EmulyticsTM . Depending upon the amount of server resources dedicated to Choreographer vis-á-vis the amount of client traffic handled, Choreographer had varying degrees of operational success. In an environment with a poorly resourced Choreographer server and as few as 50-100 clients, Choreographer failed to properly route traffic over half the time. Yet, with a well-resourced server, Choreographer handled over 1000 clients without missrouting. Choreographer demonstrated sensitivity to low-latency connections as well as high volumes of traffic. In addition, depending upon the frequency of new connection requests and the size of the address range that Choreographer has to work with, it is possible for all benefits of Choreographer to be ameliorated by its need to allow DNS servers rather than the end client to make DNS requests. Conclusions and Recommendations, listed in Section 7, address the need to understand the specific use case where Choreographer would be deployed to assess whether there would be problems resulting from the operational considerations described in Section 3 or performance concerns from the results of Operational Testing in Section 6. Deployed in an appropriate architecture with sufficiently light traffic volumes and a well-provisioned server, it is quite likely that Choreographer would perform satisfactorily. Thus, we recommend further detailed testing, to potentially include Red Team testing, at such time a specific use case is identified

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Proposing an Abstracted Interface and Protocol for Computer Systems

Resnick, David R.; Ignatowski, Mike

While it made sense for historical reasons to develop different interfaces and protocols for memory channels, CPU to CPU interactions, and I/O devices, ongoing developments in the computer industry are leading to more converged requirements and physical implementations for these interconnects. As it becomes increasingly common for advanced components to contain a variety of computational devices as well as memory, the distinction between processors, memory, accelerators, and I/O devices become s increasingly blurred. As a result, the interface requirements among such components are converging. There is also a wide range of new disruptive technologies that will impact the computer market in the coming years , including 3D integration and emerging NVRAM memory. Optimal exploitation of these technologies cannot be done with the existing memory, storage, and I/O interface standards. The computer industry has historically made major advances when industry players have been able to add innovation behind a standard interface. The standard interface provides a large market for their products and enables relatively quick and widespread adoption. To enable a new wave of innovation in the form of advanced memory products and accelerators, we need a new standard interface explicitly designed to provide both the performance and flexibility to support new system integration solutions.

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Evaluation of Glare at the Ivanpah Solar Electric Generating System

Ho, Clifford K.; Sims, Cianan; Christian, Josh

The Ivanpah Solar Electric Generating System (ISEGS), located on I - 15 about 40 miles (60 km) south of Las Vegas, NV, consists of three power towers 459 ft (140 m) tall and over 170,000 reflective heliostats with a rated capacity of 390 MW. Reports of glare from the plant have been submitted by pilots and air traffic controllers and recorded by the Aviation Safety Reporting System and the California Energy Commission since 2013. Aerial and ground - based surveys of the glare were conducted in April, 2014, to identify the cause and to quantify the irradiance and potential ocular impact s of the glare . Results showed that the intense glare viewed from the airspace above ISEGS was caused by he liostats in standby mode that were aimed to the side of the receiver. Evaluation of the glare showed that the retinal irradiance and subtended source angle of the glare from the heliostats in standby were sufficient to cause significant ocular impact (pot ential for after - image) up to a distance of %7E6 miles (10 km), but the values were below the threshold for permanent eye damage . Glare from the receivers had a low potential for after - image at all ground - based monitoring locations outside of the site bound aries. A Letter to Airmen has been issued by the Federal Aviation Administration to notify pilots of the potential glare hazards. Additional measures to mitigate the potential impacts of glare from ISGES are also presented and discussed. This page intentionally left blank

More Details
TYPE SAND Report YEAR 2014
DOIOSTIDOIOSTI

Memorandum of Understanding

Siple, Bud H.

A Memorandum of Understanding establishes a clear understanding of how an agreement is going to be implemented. The Memorandum of Understanding allows all involved to specifically understand that they are agreeing to the same thing and the terms are clearly identified. It also includes the clear distinction of functions and the level of involvement of the agencies involved. Specifically, a Memorandum of Understanding gives a chance to all of those involved in the agreement to see on paper as to what they all have agreed to.

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Examples Performance Testing Templates

Siple, Bud H.

The purpose of this Performance Testing Program Plan is to identify the process and phased approach that will be implemented at Site XYZ . The purpose of the testing program at Site XYZ is specifically designed to evaluate the effectiveness of systems that are employed at this site. This plan defines tasks to be accomplished to ensure that performance testing is conducted as effectively and efficiently as possible.

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Proposing an Abstracted Interface and Protocol for Computer Systems

Resnick, David R.; Ignatowski, Mike

While it made sense for historical reasons to develop different interfaces and protocols for memory channels, CPU to CPU interactions, and I/O devices, ongoing developments in the computer industry are leading to more converged requirements and physical implementations for these interconnects. As it becomes increasingly common for advanced components to contain a variety of computational devices as well as memory, the distinction between processors, memory, accelerators, and I/O devices becomes increasingly blurred. As a result, the interface requirements among such components are converging. There is also a wide range of new disruptive technologies that will impact the computer market in the coming years, including 3D integration and emerging NVRAM memory. Optimal exploitation of these technologies cannot be done with the existing memory, storage, and I/O interface standards. The computer industry has historically made major advances when industry players have been able to add innovation behind a standard interface. The standard interface provides a large market for their products and enables relatively quick and widespread adoption. To enable a new wave of innovation in the form of advanced memory products and accelerators, we need a new standard interface explicitly designed to provide both the performance and flexibility to support new system integration solutions

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Experimental Datasets for Release to The Technology Cooperation Program CP 5-2-2012 from Sandia National Laboratories

Arunajatesan, Srinivasan

The datasets being released consist of cavity configurations for which measurements were made in the Sandia Trisonic Wind Tunnel (TWT) facility. The cavities were mounted on the walls (ceiling/floor) of the wind tunnel, with the approach flow boundary layer thickness dictated by the run-length from the settling chamber of the tunnel. No measurements of the boundary layer for the different cases were made explicitly. However, prior measurements of the boundary layer have been made and simulations of the tunnel from the settling chamber on have shown that this method yields the correct boundary layer thickness at the leading edge of the cavity. The measurements focused on the cavity flow field itself and the cavity wall pressures. For each of the cases, the stagnation conditions are prescribed in order to obtain the correct inflow conditions upstream of the cavity. The wind tunnel contours have been approved for public release and will be made available also.

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Frequency-Dependent Blanking with Digital Linear Chirp Waveform Synthesis

Doerry, Armin W.; Andrews, John M.

Wideband radar systems, especially those that operate at lower frequencies such as VHF and UHF, are often restricted from transmitting within or across specific frequency bands in order to prevent interference to other spectrum users. Herein we describe techniques for notching the transmitted spectrum of a generated and transmitted radar waveform. The notches are fully programmable as to their location, and techniques are given that control the characteristics of the notches.

More Details
TYPE SAND Report YEAR 2014
DOIOSTI

Effects of Analog-to-Digital Converter Nonlinearities on Radar Range-Doppler Maps

Doerry, Armin W.; Dubbert, Dale F.; Tise, Bertice L.

Radar operation, particularly Ground Moving Target Indicator (GMTI) radar modes, are very sensitive to anomalous effects of system nonlinearities. These throw off harmonic spurs that are sometimes detected as false alarms. One significant source of nonlinear behavior is the Analog to Digital Converter (ADC). One measure of its undesired nonlinearity is its Integral Nonlinearity (INL) specification. We examine in this report the relationship of INL to GMTI performance.

More Details
TYPE SAND Report YEAR 2014
DOIOSTI

Assessing the standard Molybdenum projector augmented wave VASP potentials

Wills, Ann E.

Density Functional Theory (DFT) based Equation of State (EOS) construction is a prominent part of Sandia’s capabilities to support engineering sciences. This capability is based on augmenting experimental data with information gained from computational investigations, especially in those parts of the phase space where experimental data is hard, dangerous, or expensive to obtain. A key part of the success of the Sandia approach is the fundamental science work supporting the computational capability. Not only does this work enhance the capability to perform highly accurate calculations but it also provides crucial insight into the limitations of the computational tools, providing high confidence in the results even where results cannot be, or have not yet been, validated by experimental data. This report concerns the key ingredient of projector augmented-wave (PAW) potentials for use in pseudo-potential computational codes. Using the tools discussed in SAND2012-7389 we assess the standard Vienna Ab-initio Simulation Package (VASP) PAWs for Molybdenum.

More Details
TYPE SAND Report YEAR 2014
DOIOSTI

MAN-004 Design Standards Manual

Peterson, Timothy L.

At Sandia National Laboratories in New Mexico (SNL/NM), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/NM applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. The safety and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule. These design standards generally apply to all disciplines on all SNL/NM projects. Architectural and engineering design must be both functional and cost-effective. Facility design must be tailored to fit its intended function, while emphasizing low-maintenance, energy-efficient, and energy-conscious design. Design facilities that can be maintained easily, with readily accessible equipment areas, low maintenance, and quality systems. To promote an orderly and efficient appearance, architectural features of new facilities must complement and enhance the existing architecture at the site. As an Architectural and Engineering (A/E) professional, you must advise the Project Manager when this approach is prohibitively expensive. You are encouraged to use professional judgment and ingenuity to produce a coordinated interdisciplinary design that is cost-effective, easily contractible or buildable, high-performing, aesthetically pleasing, and compliant with applicable building codes. Close coordination and development of civil, landscape, structural, architectural, fire protection, mechanical, electrical, telecommunications, and security features is expected to ensure compatibility with planned functional equipment and to facilitate constructability. If portions of the design are subcontracted to specialists, delivery of the finished design documents must not be considered complete until the subcontracted portions are also submitted for review. You must, along with support consultants, perform functional analyses and programming in developing design solutions. These solutions must reflect coordination of the competing functional, budgetary, and physical requirements for the project. During design phases, meetings between you and the SNL/NM Project Team to discuss and resolve design issues are required. These meetings are a normal part of the design process. For specific design-review requirements, see the project-specific Design Criteria. In addition to the design requirements described in this manual, instructive information is provided to explain the sustainable building practice goals for design, construction, operation, and maintenance of SNL/NM facilities. Please notify SNL/NM personnel of design best practices not included in this manual, so they can be incorporated in future updates.

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Draft of M2 Report on Integration of the Hybrid Hydride Model into INL's MBM Framework for Review

Tikare, Veena; Weck, Philippe F.; Schultz, Peter A.; Clark, Blythe C.

This report documents the development, demonstration and validation of a mesoscale, microstructural evolution model for simulation of zirconium hydride {delta}-ZrH{sub 1.5} precipitation in the cladding of used nuclear fuels that may occur during long-term dry storage. While the Zr-based claddings are manufactured free of any hydrogen, they absorb hydrogen during service, in the reactor by a process commonly termed ‘hydrogen pick-up’. The precipitation and growth of zirconium hydrides during dry storage is one of the most likely fuel rod integrity failure mechanisms either by embrittlement or delayed hydride cracking of the cladding. While the phenomenon is well documented and identified as a potential key failure mechanism during long-term dry storage (NUREG/CR-7116), the ability to actually predict the formation of hydrides is poor. The model being documented in this work is a computational capability for the prediction of hydride formation in different claddings of used nuclear fuels. This work supports the Used Fuel Disposition Research and Development Campaign in assessing the structural engineering performance of the cladding during and after long-term dry storage. This document demonstrates a basic hydride precipitation model that is built on a recently developed hybrid Potts-phase field model that combines elements of Potts-Monte Carlo and the phase-field models. The model capabilities are demonstrated along with the incorporation of the starting microstructure, thermodynamics of the Zr-H system and the hydride formation mechanism.

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Genomic Functionalization: The Next Revolution In Biology

Imbro, Paula; Schoeniger, Joseph S.; Anderson, Peter

We have implemented a ligand-alignment algorithm into our developed computational pipeline for identifying specificity-determining features (SDFs) in protein-ligand complexes. Given a set of protein-ligand complex structures, the algorithm aligns the complexes by ligand rather than by the C -RMSD or standard approach, providing a single reference frame for extracting SDFs. We anticipate that this ligand-alignment capability will be highly useful for protein function prediction. We already have a database containing > 20 K ligand-protein complex crystal structures taken from the Protein Data Bank. By aligning these proteins to single reference frames using ligand alignment, we can submit the complexes to our pipeline for SDF extraction. The SDFs derived from this training procedure can be used as thumbprints that are hallmarks of individual enzyme classes. These SDF thumbprints may then serve as guides to the prediction of function of new unknown proteins.

More Details
TYPE SAND Report YEAR 2014
DOIOSTI

Analysis of Spectral Variation in Background Gamma Radiation at U.S. Ports of Entry

Homolka, Kaylee L.

This project exists to improve the ability to detect nuclear material crossing the borders. The purpose of my portion of this project was to analyze spectral variations of backgrounds measured by radiation portal monitor detectors at ports of entry using available data to determine whether or not the measured background variation includes changes in the spectral shape in addition to changes in the gross counts.

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Granular Salt Summary: Reconsolidation Principles and Applications

Hansen, Francis D.; Popp, Till; Wieczorek, Klaus; Stuehrenberg, Dieter

The purposes of this paper are to review the vast amount of knowledge concerning crushed salt reconsolidation and its attendant hydraulic properties (i.e., its capability for fluid or gas transport) and to provide a sufficient basis to understand reconsolidation and healing rates under repository conditions. Topics covered include: deformation mechanisms and hydro-mechanical interactions during reconsolidation; the experimental data base pertaining to crushed salt reconsolidation; transport properties of consolidating granulated salt and provides quantitative substantiation of its evolution to characteristics emulating undisturbed rock salt; and extension of microscopic and laboratory observations and data to the applicable field scale.

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Structure and stabilization of hydrogen-rich transverse jets in a vitiated turbulent flow

Lyra, Sgouria; Kolla, Hemanth; Chen, Jacqueline H.; Wilde, B.; Seitzman, J.; Lieuwen, T.C.

This paper reports the results of a joint experimental and numerical study of the ow characteristics and flame stabilization of a hydrogen rich jet injected normal to a turbulent, vitiated cross ow of lean methane combustion products. Simultaneous high-speed stereoscopic PIV and OH PLIF measurements were obtained and analyzed alongside three-dimensional direct numerical simulations of inert and reacting JICF with detailed H2/CO chemistry. Both the experiment and the simulation reveal that, contrary to most previous studies of reacting JICF stabilized in low-to-moderate temperature air cross ow, the present conditions lead to an autoigniting, burner-attached flame that initiates uniformly around the burner edge. Significant asymmetry is observed, however, between the reaction zones located on the windward and leeward sides of the jet, due to the substantially different scalar dissipation rates. The windward reaction zone is much thinner in the near field, while also exhibiting significantly higher local and global heat release than the much broader reaction zone found on the leeward side of the jet. The unsteady dynamics of the windward shear layer, which largely control the important jet/cross flow mixing processes in that region, are explored in order to elucidate the important flow stability implications arising in the reacting JICF. Vorticity spectra extracted from the windward shear layer reveal that the reacting jet is globally unstable and features two high frequency peaks, including a fundamental mode whose Strouhal number of ~0.7 agrees well with previous non-reacting JICF stability studies. The paper concludes with an analysis of the ignition, ame stabilization, and global structure of the burner-attached flame. Chemical explosive mode analysis (CEMA) shows that the entire windward shear layer, and a large region on the leeward side of the jet, are highly explosive prior to ignition and are dominated by non-premixed flame structures after ignition. The predominantly mixing limited nature of the flow after ignition is confirmed by computing the Takeno flame index, which shows that ~70% of the heat release occurs in non-premixed regions.

More Details
TYPE Other Report YEAR 2014
DOIOSTI

Assessment of Contaminated Brine Fate and Transport in MB139 at WIPP

Kuhlman, Kristopher L.; Malama, Bwalya

Following the radionuclide release event of February 14, 2014 at the Waste Isolation Pilot Plant (WIPP), actinide contamination has been found on the walls and floor in Panel 7 as a result of a release in Room 7 of Panel 7. It has been proposed to decontaminate Panel 7 at the WIPP by washing contaminated surfaces in the underground with fresh water. A cost-effective cleanup of this contamination would allow for a timely return to waste disposal operations at WIPP. It is expected that the fresh water used to decontaminate Panel 7 will flow as contaminated brine down into the porosity of the materials under the floor – the run-of-mine (ROM) salt above Marker Bed 139 (MB139) and MB139 itself – where its fate will be controlled by the hydraulic and transport properties of MB139. Due to the structural dip of MB139, it is unlikely that this brine would migrate northward towards the Waste-Handling Shaft sump. A few strategically placed shallow small-diameter observation boreholes straddling MB139 would allow for monitoring the flow and fate of this brine after decontamination. Additionally, given that flow through the compacted ROM salt floor and in MB139 would occur under unsaturated (or two-phase) conditions, there is a need to measure the unsaturated flow properties of crushed WIPP salt and salt from the disturbed rock zone (DRZ).

More Details
TYPE SAND Report YEAR 2014
DOIOSTI
Results 54001–54200 of 100,993
Results 54001–54200 of 100,993
Top