Publications

Results 7101–7200 of 99,299

Search results

Jump to search filters

A Step Toward Working with Untrusted Ground Stations

Toomey, John; Crosby, Sean M.

We are witnessing a shift toward outsourcing satellite and ground station services to third-party commercial entities. As with any enterprise, these third parties can be vulnerable to cyber compromise, including image tampering and deepfake injection. The multimedia community is beginning to establish standards and technology to enable authenticity verification of multimedia created and edited by others. While appealing to the remote sensing domain, the nature of raw satellite imagery is incompatible with the proposed change verification tools, resulting in the need for a means to validate updates made to image products. We present a simple method for verifying a specific class of algorithms. Our inverse processing approach eliminates the need to see the original image as the reversed data can be checked against an original digital signature. We demonstrate our approach on basic image restoration routines and conclude with a discussion on open challenges and next steps.

More Details
TYPE Other Report YEAR 2022
DOIOSTI

Introduction to Carbon Sensing in Soil. A surface-level review of traditional and alternative methods of soil carbon measurement

Fultz-Waters, Sydney

Soil carbon can be divided into two categories: organic and inorganic. Soil inorganic carbon (SIC) is present in carbonate minerals in the soil and is often found in dry, arid regions. Examples of SIC include calcium carbonate (CaCO3) and magnesium carbonate (MgCO3), both of which play important roles in soil health. Soil organic carbon (SOC) is found in fresh plant matter (available SOC) and as humus or charcoal (inert SOC). Both types of carbon act as storage in the global carbon cycle. As a carbon sink, soil carbon has the potential to store carbon that would otherwise remain in the atmosphere as CO2, one of the primary greenhouse emissions. As such, soil is under increasing attention and research to be used as a sequestration (i.e., isolation) method to reduce the amount of carbon in the atmosphere. This type of carbon sequestration is called biological sequestration. SOC typically stores carbon for several decades (depending on decomposition rates) while SIC can store carbon for more than 70,000 years. Common sequestration techniques for SOC usually fall under the category of land management: planting perennials, keeping plant residue and composting, reducing tilling, and other agricultural practices that vary by region. SIC sequestration through carbonates naturally takes thousands of years but there have been studies to increase SIC sequestration through the addition of silicates.

More Details
TYPE Other Report YEAR 2022
DOIOSTI

A study of sacrificial mirrors for use prior to a laser wakefield accelerator driven by the Z-Petawatt laser

Galloway, Benjamin R.; Rambo, Patrick K.; Geissel, Matthias; Kimmel, Mark; Kellogg, Jeffrey; Elle, Jennifer; Garrett, Travis; Porter, John L.; Rochau, G.A.

Many experiments at Sandia’s Z Pulsed Power Facility require x-ray backlighting diagnostics to understand experiment performance. Due to limitations in present-day source/detection modalities, most x-ray diagnostics at Z are restricted to photon energies <20 keV, ultimately limiting the density, amount, and atomic number of targets diagnosable in experiments. These limitations force the use of low-Z materials like Beryllium, and they prevent acquisition of important backlighting data for materials/densities that are opaque to soft x-rays and where background emission from the Z load and transmission lines overwhelm diagnostics. In this LDRD project, we have investigated the design and development of a laser wakefield acceleration platform driven by the Z-Petawatt laser – a platform that would enable the generation of a pulsed, collimated beam of high energy x-rays up to 100 keV. Geometrical considerations for implementation on the Z Machine require the use of sacrificial mirrors, which have been tested in offline experiments in the Chama target chamber in building 983. Our results suggest the use of sacrificial mirrors would not necessarily inhibit the laser wakefield x-ray process, particularly with the benefits stemming from planned laser upgrades. These conclusions support the continuation of laser wakefield source research and the development of the necessary infrastructure to deliver the Z-Petawatt laser to the Z center section along the appropriate lines of sight. Ultimately, this new capability will provide unprecedented views through dense states of matter, enabling the use of previously incompatible target materials/designs, and uncovering a new set of observables accessible through diffraction and spectroscopy in the hard x-ray regime. These will amplify the data return on precious Z shots and enhance Sandia’s ability to investigate fundamental physics in support of national security.

More Details
TYPE SAND Report YEAR 2022
DOIOSTI

DECOVALEX 2023 Task D -- Interim Report from SNL

Jove-Colon, Carlos F.; Lopez, Carlos M.; Kuhlman, Kristopher L.

The capability of a 1-D PFLOTRAN model to simulate the S1-3 bentonite saturation experiment has been demonstrated and validated against experimental data. Work remains to be done to refine 1-D PFLOTRAN simulations of the experiment S1-4 which include evaluation of parameter sensitivities on the prediction of material saturation and relative permeabilities. This and further testing of PFLOTRAN capabilities will be done as part of DECOVALEX 2023 Task D contributions by the SNL team in the coming months.

More Details
TYPE Other Report YEAR 2022
DOIOSTI

Surrogate modeling for efficiently, accurately and conservatively estimating measures of risk

Reliability Engineering and System Safety

Jakeman, John D.; Kouri, Drew P.; Huerta, Jose G.

We present a surrogate modeling framework for conservatively estimating measures of risk from limited realizations of an expensive physical experiment or computational simulation. Risk measures combine objective probabilities with the subjective values of a decision maker to quantify anticipated outcomes. Given a set of samples, we construct a surrogate model that produces estimates of risk measures that are always greater than their empirical approximations obtained from the training data. These surrogate models limit over-confidence in reliability and safety assessments and produce estimates of risk measures that converge much faster to the true value than purely sample-based estimates. We first detail the construction of conservative surrogate models that can be tailored to a stakeholder's risk preferences and then present an approach, based on stochastic orders, for constructing surrogate models that are conservative with respect to families of risk measures. Our surrogate models include biases that permit them to conservatively estimate the target risk measures. We provide theoretical results that show that these biases decay at the same rate as the L2 error in the surrogate model. Numerical demonstrations confirm that risk-adapted surrogate models do indeed overestimate the target risk measures while converging at the expected rate.

More Details
TYPE Journal Article YEAR 2022
DOIOSTIScopus

Produced Water-Economic, Socio, Environmental Simulation Model (PW-ESEim) Model: Proof-of-Concept for Southeastern New Mexico

Tidwell, Vincent; Gunda, Thushara; Caballero, Mariah D.; Xu, Pei; Xu, Xuesong; Bernknopf, Rich; Broadbent, Craig; Malczynski, Leonard A.; Jacobson, Jake

A proof-of-concept tool, the Produced Water-Economic, Socio, Environmental Simulation model (PW-ESESim), was developed to support ease of analysis. The tool was designed to facilitate head-to-head comparison of alternative produced water source, treatment, and reuse water management strategies. A graphical user interface (GUI) guides the user through the selection and design of alternative produced water treatment and reuse strategies and the associated health and safety risk and economic benefits. At the highest conceptual level, alternative water strategies include the selection of a source water (locally or regionally available produced water), treatment strategy (pre-treatment, physical, chemical, biological, desalination, and post-treatment processes) and product water purpose (e.g., irrigation, industrial processing, environmental). After selection of these details, the PW-ESESim output a number of key economic, societal, environmental, public/ecological health and safety metrics to support user decision-making; specific examples include, cost of treatment, improvements in freshwater availability, human and ecologic health impacts and growth in local jobs and the economy. Through the simulation of different produced water treatment and management strategies, tradeoffs are identified and used to inform fit-for-purpose produced water treatment and reuse management decisions. While the tool was initially designed using Southeastern New Mexico (Permian Basin) as a case study, the general design of the PW-ESESim model can be extended to support other oil and gas regions of the U.S.

More Details
TYPE Other Report YEAR 2022
DOIOSTI

Infrasound direction of arrival determination using a balloon-borne aeroseismometer

JASA Express Letters

Bowman, Daniel; Rouse, Jerry W.; Krishnamoorthy, Siddharth; Silber, Elizabeth A.

Free-floating balloons are an emerging platform for infrasound recording, but they cannot host arrays sufficiently wide for multi-sensor acoustic direction finding techniques. Because infrasound waves are longitudinal, the balloon motion in response to acoustic loading can be used to determine the signal azimuth. This technique, called “aeroseismometry,” permits sparse balloon-borne networks to geolocate acoustic sources. This is demonstrated by using an aeroseismometer on a stratospheric balloon to measure the direction of arrival of acoustic waves from successive ground chemical explosions. A geolocation algorithm adapted from hydroacoustics is then used to calculate the location of the explosions.

More Details
TYPE Journal Article YEAR 2022
DOIOSTIScopus

Effects and mitigation of pulsed power radiation on optical fiber velocimetry

Physics of Plasmas

Dolan, D.H.; Payne, S.; Bell, K.; Fox, Brian P.; Moore, Nathan W.

Optical fiber diagnostics are extensively used in pulsed power experiments, such as the Sandia Z machine. However, radiation produced in a pulsed power environment can significantly affect these measurements. Catastrophic fiber darkening may be mitigated with shielding, but no flexible material can stop all radiation produced by the machine and/or target. Radiation-induced refractive index modulations are particularly challenging for optical interferometry. Several approaches for radiation-tolerant photonic Doppler velocimetry are discussed here.

More Details
TYPE Journal Article YEAR 2022
DOIOSTIScopus

Big Hill Geomechanical Analysis Using M-D Viscoplastic Material Model

Park, Byoung

The integrity of wellbores at the interbed between the caprock and salt is a serious concern in the Big Hill site. For the remediation and life extension of wellbores, more accurate predictions from the global model are needed. The Big Hill global model is improved using the M-D viscoplastic contact surface model and the mesh containing the interbed layer with contact surfaces between the salt and caprock layers, and fault blocks in overburden and caprock layers. The model calibration has been performed based on the cavern volumetric closures obtained from the Caveman calculations. The results agree well from 1991 to the early 2000s. The difference starts to widen after that, it might be because of frequent fluid movement and raw water injection. Therefore, the predictions from this improved model could be used to examine the structural integrity of caverns in Big Hill salt dome.

More Details
TYPE SAND Report YEAR 2022
DOIOSTI

3D Simulations of OMEGA Implosions in Presence of Low Mode Asymmetries: Systematic Flow Anomalies and Impact of Low Modes on Implosion Performance

Colaitis, Arnaud; Igumenschev, Igor; Turnbull, David; Shah, Rahul; Edgell, Dana; Mannion, Owen M.; Stoeckl, Christian; Shvydky, Alex; Janezic, Roger; Kalb, Adam; Coa, Duc; Forrest, Chad; Kwiatkowski, Joe; Regan, Sean; Theobald, Wolfgang; Goncharov, Valeri; Froula, Dustin

Abstract not provided.

More Details
TYPE Conference Presentation YEAR 2022
DOIOSTI

Model Evaluation Protocol for Fire Models Involving Fuels at Liquefied Natural Gas Facilities

Luketa, Anay

This document provides a description of the model evaluation protocol (MEP) for pool fires, jet fires, and fireballs involving liquefied natural gas (LNG), refrigerant fluids, and byproducts at LNG facilities. The purpose of the MEP is to provide procedures regarding the assessment of a model's suitability to predict heat flux from fires. Three components, namely, a scientific assessment, model verification, and model validation comprise the MEP. The evaluation of a model satisfying these three components is to be documented in the form of a model evaluation report (MER). Discussion of models for the prediction of fire, detailed information on each of the three MEP components, the MEP procedure regarding new versions of previously approved models, and the format of the model evaluation report (MER) are provided.

More Details
TYPE SAND Report YEAR 2022
DOIOSTI

Measurements of the temperature and velocity of the dense fuel layer in inertial confinement fusion experiments

Physical Review E

Mannion, Owen M.; Crilly, A.J.; Forrest, C.J.; Appelbe, B.D.; Betti, R.; Glebov, V.Y.; Gopalaswamy, V.; Knauer, J.P.; Mohamed, Z.L.; Stoeckl, C.; Chittenden, J.P.; Regan, S.P.

The apparent ion temperature and mean velocity of the dense deuterium tritium fuel layer of an inertial confinement fusion target near peak compression have been measured using backscatter neutron spectroscopy. The average isotropic residual kinetic energy of the dense deuterium tritium fuel is estimated using the mean velocity measurement to be ∼103 J across an ensemble of experiments. The apparent ion-temperature measurements from high-implosion velocity experiments are larger than expected from radiation-hydrodynamic simulations and are consistent with enhanced levels of shell decompression. These results suggest that high-mode instabilities may saturate the scaling of implosion performance with the implosion velocity for laser-direct-drive implosions.

More Details
TYPE Journal Article YEAR 2022
DOIOSTIScopus

Phase transitions in high-purity zirconium under dynamic compression

Physical Review B

Greeff, C.W.; Brown, Justin L.; Velisavljevic, N.; Rigg, P.A.

We present results from ramp compression experiments on high-purity Zr that show the α→ω, ω→β, as well as reverse β→ω phase transitions. Simulations with a multiphase equation of state and phenomenological kinetic model match the experimental wave profiles well. While the dynamic α→ω transition occurs ∼9GPa above the equilibrium phase boundary, the ω→β transition occurs within 0.9 GPa of equilibrium. We estimate that the dynamic compression path intersects the equilibrium ω-β line at P=29.2GPa, and T=490K. The thermodynamic path in the interior of the sample lies ∼100K above the isentrope at the point of the ω→β transition. Approximately half of this dissipative temperature rise is due to plastic work, and half is due to the nonequilibrium α→ω transition. The inferred rate of the α→ω transition is several orders of magnitude higher than that measured in dynamic diamond anvil cell (DDAC) experiments in an overlapping pressure range. We discuss a model for the influence of shear stress on the nucleation rate. We find that the shear stress sji has the same effect on the nucleation rate as a pressure increase δP=cϵijsji/(ΔV/V), where c is a geometric constant ∼1 and ϵij are the transformation shear strains. The small fractional volume change ΔV/V≈0.1 at the α→ω transition amplifies the effect of shear stress, and we estimate that for this case δP is in the range of several GPa. Correcting our transition rate to a hydrostatic rate brings it approximately into line with the DDAC results, suggesting that shear stress plays a significant role in the transformation rate.

More Details
TYPE Journal Article YEAR 2022
DOIOSTIScopus

Federated Learning and Differential Privacy: What might AI-Enhanced co-design of microelectronics learn?

Eugenio, Evercita C.

Data is a valuable commodity, and it is often dispersed over multiple entities. Sharing data or models created from the data is not simple due to concerns regarding security, privacy, ownership, and model inversion. This limitation in sharing can hinder model training and development. Federated learning can enable data or model sharing across multiple entities that control local data without having to share or exchange the data themselves. Differential privacy is a conceptual framework that brings strong mathematical guarantee for privacy protection and helps provide a quantifiable privacy guarantee to any data or models shared. The concepts of federated learning and differential privacy are introduced along with possible connections. Lastly, some open discussion topics on how federated learning and differential privacy can tied to AI-Enhanced co-design of microelectronics are highlighted.

More Details
TYPE Other Report YEAR 2022
DOIOSTI

Model Validation Database for Fires Involving Fuels at Liquefied Natural Gas Facilities

Luketa, Anay

This document provides a description of the model evaluation protocol (MEP) database for fires involving liquefied natural gas (LNG) and processing fuels at LNG facilities. The purpose of the MEP is to provide procedures regarding the assessment of a model's suitability to predict thermal exclusion zones resulting from a fire. The database includes measurements from pool fire, jet fire, and fireball experiments which are provided in a spreadsheet. Users are to enter model results into the spreadsheet which automatically generates statistical performance measures and graphical comparisons with the experimental data. The intent of this document is to provide a description of the experiments and of the procedure required to carry out the validation portion of the MEP. In addition, the statistical performance measures, measurements for comparisons, and parameter variation are provided.

More Details
TYPE SAND Report YEAR 2022
DOIOSTI

NNSA Minority Serving Institute Partnership Program (MSIPP)--Indigenous Mutual Partnership to Advanced Cybersecurity Technology (ASPIRE, IMPACT and PAMER); FY22 Q2 Progress Report

Atcitty, Stanley; Moriarty, Dylan M.; Hernandez, Virginia

The following report summarizes the status update during this quarter for the National Nuclear Security Agency (NNSA) initiated Minority Serving Institution Partnership Plan's (MSIPP) projects titled, Indigenous Mutual Partnership to Advanced Cybersecurity Technology (ASPIRE), Indigenous Mutual Partnership to Advanced Cybersecurity Technology (IMPACT) and Partnership for Advanced Manufacturing Education and Research (PAMER).

More Details
TYPE SAND Report YEAR 2022
DOIOSTI
Results 7101–7200 of 99,299
Results 7101–7200 of 99,299