Publications

Many, if not all, Waste Management Organisation programs will include criticality safety. As criticality safety in the long-term, i.e. considered over post-closure timescales in dedicated disposal facilities, is a unique challenge for geological disposal there is limited opportunity for sharing of experience within an individual organization/country. Therefore, sharing of experience and knowledge between WMOs to understand any similarities and differences will be beneficial in understanding where the approaches are similar and where they are not, and the reasons for this. To achieve this benefit a project on Post-Closure Criticality Safety has been established through the Implementing Geological Disposal - Technology Platform with the overall aim to facilitate the sharing of this knowledge. This project currently has 11 participating nations, including the United States and this paper presents the current position in the United States.

With the increase in penetration of inverter-based resources (IBRs) in the electrical power system, the ability of these devices to provide grid support to the system has become a necessity. With standards previously developed for the interconnection requirements of grid-following inverters (GFLI) (most commonly photovoltaic inverters), it has been well documented how these inverters 'should' respond to changes in voltage and frequency. However, with other IBRs such as grid-forming inverters (GFMIs) (used for energy storage systems, standalone systems, and as uninterruptable power supplies) these requirements are either: not yet documented, or require a more in deep analysis. With the increased interest in microgrids, GFMIs that can be paralleled onto a distribution system have become desired. With the proper control schemes, a GFMI can help maintain grid stability through fast response compared to rotating machines. This paper will present an experimental comparison of commercially available GFMIand GFLI ' responses to voltage and frequency deviation, as well as the GFMIoperating as a standalone system and subjected to various changes in loads.

The proper coordination of power system protective devices is essential for maintaining grid safety and reliability but requires precise knowledge of fault current contributions from generators like solar photovoltaic (PV) systems. PV inverter fault response is known to change with atmospheric conditions, grid conditions, and inverter control settings, but this time-varying behavior may not be fully captured by conventional static fault studies that are used to evaluate protection constraints in PV hosting capacity analyses. To address this knowledge gap, hosting capacity protection constraints were evaluated on a simplified test circuit using both a time-series fault analysis and a conventional static fault study approach. A PV fault contribution model was developed and utilized in the test circuit after being validated by hardware experiments under various irradiances, fault voltages, and advanced inverter control settings. While the results were comparable for certain protection constraints, the time-series fault study identified additional impacts that would not have been captured with the conventional static approach. Overall, while conducting full time-series fault studies may become prohibitively burdensome, these findings indicate that existing fault study practices may be improved by including additional test scenarios to better capture the time-varying impacts of PV on hosting capacity protection constraints.

Stochasticity is ubiquitous in the world around us. However, our predominant computing paradigm is deterministic. Random number generation (RNG) can be a computationally inefficient operation in this system especially for larger workloads. Our work leverages the underlying physics of emerging devices to develop probabilistic neural circuits for RNGs from a given distribution. However, codesign for novel circuits and systems that leverage inherent device stochasticity is a hard problem. This is mostly due to the large design space and complexity of doing so. It requires concurrent input from multiple areas in the design stack from algorithms, architectures, circuits, to devices. In this paper, we present examples of optimal circuits developed leveraging AI-enhanced codesign techniques using constraints from emerging devices and algorithms. Our AI-enhanced codesign approach accelerated design and enabled interactions between experts from different areas of the micro-electronics design stack including theory, algorithms, circuits, and devices. We demonstrate optimal probabilistic neural circuits using magnetic tunnel junction and tunnel diode devices that generate an RNG from a given distribution.

In high temperature (HT) environments often encountered in geothermal wells, data rate transfers for downhole instrumentation are relatively limited due to transmission line bandwidth and insertion loss and the processing speed of HT microcontrollers. In previous research, Sandia National Laboratory Geothermal Department obtained 3.8 Mbps data rates over 1524 m (5000 ft) for single conductor wireline cable with less than a 1x10^-8 bit error rate utilizing low temperature NI^TM hardware (formerly National Instruments^TM). Our protocol technique was a combination of orthogonal frequency-division multiplexing and quadrature amplitude modulation across the bandwidth of the single conductor wireline. This showed it is possible to obtain high data rates in low bandwidth wirelines. This paper focuses on commercial HT microcontrollers (µC), rather than low temperature NI^TM modules, to enable high-speed communication in an HT environment. As part of this effort, four devices were evaluated, and an optimal device (SM320F28335-HT) was selected for its high clock rates, floating-point unit, and on-board analog-to-digital converter. A printed circuit board was assembled with the HT µC, an HT resistor digital-to-analog converter, and an HT line driver. The board was tested at the microcontroller's rated maximum temperature (210°C) for a week while transmitting through a 1524 m (5000 ft) wireline. A final test was conducted to the point of failure at elevated temperatures. This paper will discuss communication methods, achieved data rates, and hardware selection. This effort contributes to the enhancement of HT instrumentation by enabling greater sensor counts and improving data accuracy and transfer rates.

Metal additive manufacturing allows for the fabrication of parts at the point of use as well as the manufacture of parts with complex geometries that would be difficult to manufacture via conventional methods (milling, casting, etc.). Additively manufactured parts are likely to contain internal defects due to the melt pool, powder material, and laser velocity conditions when printing. Two different types of defects were present in the CT scans of printed AlSi10Mg dogbones: spherical porosity and irregular porosity. Identification of these pores via a machine learning approach (i.e., support vector machines, convolutional neural networks, k-nearest neighbors’ classifiers) could be helpful with part qualification and inspections. The machine learning approach will aim to label the regions of porosity and label the type of porosity present. The results showed that a combination approach of Canny edge detection and a classification-based machine learning model (k-nearest neighbors or support vector machine) outperformed the convolutional neural network in segmenting and labeling different types of porosity.

Unpredictable disturbances with dynamic trajectories such as extreme weather events and cyber attacks require adaptive, cyber-physical special protection schemes to mitigate cascading impact in the electric grid. A harmonized automatic relay mitigation of nefarious intentional events (HARMONIE) special protection scheme (SPS) is being developed to address that need. However, for evaluating the HARMONIE-SPS performance in classifying system disturbances and mitigating consequences, a cyber-physical testbed is required to further development and validate the methodology. In this paper, we present a design for a co-simulation testbed leveraging the SCEPTRE™ platform and the real-time digital simulator (RTDS). The integration of these two platforms is detailed, as well as the unique, specific needs for testing HARMONIE-SPS within the environment. Results are presented from tests involving a WSCC 9-bus system with different load shedding scenarios with varying cyber-physical impact.

Abstract not provided.

Carbon sequestration is a growing field that requires subsurface monitoring for potential leakage of the sequestered fluids through the casing annulus. Sandia National Laboratories (SNL) is developing a smart collar system for downhole fluid monitoring during carbon sequestration. This technology is part of a collaboration between SNL, University of Texas at Austin (UT Austin) (project lead), California Institute of Technology (Caltech), and Research Triangle Institute (RTI) to obtain real-time monitoring of the movement of fluids in the subsurface through direct formation measurements. Caltech and RTI are developing millimeter-scale radio frequency identification (RFID) sensors that can sense carbon dioxide, pH, and methane. These sensors will be impervious to cement, and as such, can be mixed with cement and poured into the casing annulus. The sensors are powered and communicate via standard RFID protocol at 902-928 MHz. SNL is developing a smart collar system that wirelessly gathers RFID sensor data from the sensors embedded in the cement annulus and relays that data to the surface via a wired pipe that utilizes inductive coupling at the collar to transfer data through each segment of pipe. This system cannot transfer a direct current signal to power the smart collar, and therefore, both power and communications will be implemented using alternating current and electromagnetic signals at different frequencies. The complete system will be evaluated at UT Austin's Devine Test Site, which is a highly characterized and hydraulically fractured site. This is the second year of the three-year effort, and a review of SNL's progress on the design and implementation of the smart collar system is provided.

This paper presents a visualization technique for incorporating eigenvector estimates with geospatial data to create inter-area mode shape maps. For each point of measurement, the method specifies the radius, color, and angular orientation of a circular map marker. These characteristics are determined by the elements of the right eigenvector corresponding to the mode of interest. The markers are then overlaid on a map of the system to create a physically intuitive visualization of the mode shape. This technique serves as a valuable tool for differentiating oscillatory modes that have similar frequencies but different shapes. This work was conducted within the Western Interconnection Modes Review Group (WIMRG) in the Western Electric Coordinating Council (WECC). For testing, we employ the WECC 2021 Heavy Summer base case, which features a high-fidelity, industry standard dynamic model of the North American Western Interconnection. Mode estimates are produced via eigen-decomposition of a reduced-order state matrix identified from simulated ringdown data. The results provide improved physical intuition about the spatial characteristics of the inter-area modes. In addition to offline applications, this visualization technique could also enhance situational awareness for system operators when paired with online mode shape estimates.

This paper reports on Catalyst usability and initial adoption by SPARC analysts. The use case approach highlights the analysts' perspective. Impediments to adoption can be due to deficiencies in software capabilities, or analysts may identify mundane inconveniences and barriers that prevent them from fully leveraging Catalyst. With that said, for many analyst tasks Catalyst provides enough relative advantage that they have begun applying it in their production work, and they recognize the potential for it to solve problems they currently struggle with. The findings in this report include specific issues and minor bugs in ParaView Python scripting, which are viewed as having straightforward solutions, as well as a broader adoption analysis.

Any program tasked with the evaluation and acquisition of algorithms for use in deployed scenarios must have an impartial, repeatable, and auditable means of benchmarking both candidate and fielded algorithms. Success in this endeavor requires a body of representative sensor data, data labels indicating the proper algorithmic response to the data as adjudicated by subject matter experts, a means of executing algorithms under review against the data, and the ability to automatically score and report algorithm performance. Each of these capabilities should be constructed in support of program and mission goals. By curating and maintaining data, labels, tests, and scoring methodology, a program can understand and continually improve the relationship between benchmarked and fielded performance of acquired algorithms. A system supporting these program needs, deployed in an environment with sufficient computational power and necessary security controls is a powerful tool for ensuring due diligence in evaluation and acquisition of mission critical algorithms. This paper describes the Seascape system and its place in such a process.

Grid technologies connected via power electronic converter (PEC) interfaces increasingly include the grid support functions for voltage and frequency support defined by the IEEE 1547-2018 standard. The shift towards converter-based generation necessitates accurate PEC models for assessing system dynamics that were previously ignored in conventional power systems. In this paper, a method for assessing photovoltaic (PV) inverter dynamics using a data-driven technique with power hardware-in-the-loop is presented. The data-driven modeling technique uses various probing signals to estimate commercial off-the-shelf (COTS) inverter dynamics. The MATLAB system identification toolbox is used to develop a dynamic COTS inverter model from the perturbed grid voltage (i.e., probing signal) and measured current injected to the grid by the inverter. The goodness-of-fit of COTS inverter dynamics in Volt-VAr support mode under each probing signal is compared. The results show that the logarithmic square-chirp probing signal adequately excites the COTS inverter in Volt-VAr mode to fit a data-driven dynamic model.

To keep pace with the demand for innovation through scientific computing, modern scientific software development is increasingly reliant upon a rich and diverse ecosystem of software libraries and toolchains. Research software engineers (RSEs) responsible for that infrastructure perform highly integrative work, acting as a bridge between the hardware, the needs of researchers, and the software layers situated between them; relatively little, however, has been written about the role played by RSEs in that work and what support they need to thrive. To that end, we present a two-part report on the development of half-precision floating point support in the Kokkos Ecosystem. Half-precision computation is a promising strategy for increasing performance in numerical computing and is particularly attractive for emerging application areas (e.g., machine learning), but developing practicable, portable, and user-friendly abstractions is a nontrivial task. In the first half of the paper, we conduct an engineering study on the technical implementation of the Kokkos half-precision scalar feature and showcase experimental results; in the second half, we offer an experience report on the challenges and lessons learned during feature development by the first author. We hope our study provides a holistic view on scientific library development and surfaces opportunities for future studies into effective strategies for RSEs engaged in such work.

Dynamical systems subject to intermittent contact are often modeled with piecewise-smooth contact forces. However, the discontinuous nature of the contact can cause inaccuracies in numerical results or failure in numerical solvers. Representing the piecewise contact force with a continuous and smooth function can mitigate these problems, but not all continuous representations may be appropriate for this use. In this work, five representations used by previous researchers (polynomial, rational polynomial, hyperbolic tangent, arctangent, and logarithm-arctangent functions) are studied to determine which ones most accurately capture nonlinear behaviors including super- and subharmonic resonances, multiple solutions, and chaos. The test case is a single-DOF forced Duffing oscillator with freeplay nonlinearity, solved using direct time integration. This work intends to expand on past studies by determining the limits of applicability for each representation and what numerical problems may occur.

The characterization of mixtures of non-interacting, spectroscopically similar quantum components has important applications in chemistry, biology, and materials science. We introduce an approach based on quantum tracking control that allows for determining the relative concentrations of constituents in a quantum mixture, using a single pulse which enhances the distinguishability of components of the mixture and has a length that scales linearly with the number of mixture constituents. To illustrate the method, we consider two very distinct model systems: mixtures of diatomic molecules in the gas phase, as well as solid-state materials composed of a mixture of components. A set of numerical analyses are presented, showing strong performance in both settings.

Abstract not provided.

With the increase in penetration of inverter-based resources (IBRs) in the electrical power system, the ability of these devices to provide grid support to the system has become a necessity. With standards previously developed for the interconnection requirements of grid-following inverters (GFLI) (most commonly photovoltaic inverters), it has been well documented how these inverters 'should' respond to changes in voltage and frequency. However, with other IBRs such as grid-forming inverters (GFMIs) (used for energy storage systems, standalone systems, and as uninterruptable power supplies) these requirements are either: not yet documented, or require a more in deep analysis. With the increased interest in microgrids, GFMIs that can be paralleled onto a distribution system have become desired. With the proper control schemes, a GFMI can help maintain grid stability through fast response compared to rotating machines. This paper will present an experimental comparison of commercially available GFMIand GFLI ' responses to voltage and frequency deviation, as well as the GFMIoperating as a standalone system and subjected to various changes in loads.

Growing interest in renewable energy sources has led to an increased installation rate of distributed energy resources (DERs) such as solar photovoltaics (PVs) and wind turbine generators (WTGs). The variable nature of DERs has created several challenges for utilities and system operators related to maintaining voltage and frequency. New grid standards are requiring DERs to provide voltage regulation across distribution networks. Volt-Var Curve (VVC) control is an autonomous grid-support function that provides voltage regulation based on the relationship between voltage and reactive power. This paper evaluates the performance of a WTG operating with VVC control. The evaluation of the model involves a MATLAB/Simulink simulation of a distribution system. For this simulation the model considers three WTGs and a variable load that creates a voltage event.

Abstract not provided.

The installation of digital sensors, such as advanced meter infrastructure (AMI) meters, has provided the means to implement a wide variety of techniques to increase visibility into the distribution system, including the ability to calibrate the utility models using data-driven algorithms. One challenge in maintaining accurate and up-to-date distribution system models is identifying changes and event occurrences that happen during the year, such as customers who have changed phases due to maintenance or other events. This work proposes a method for the detection of phase change events that utilizes techniques from an existing phase identification algorithm. This work utilizes an ensemble step to obtain predicted phases for windows of data, therefore allowing the predicted phase of customers to be observed over time. The proposed algorithm was tested on four utility datasets as well as a synthetic dataset. The synthetic tests showed the algorithm was capable of accurately detecting true phase change events while limiting the number of false-positive events flagged. In addition, the algorithm was able to identify possible phase change events on two real datasets.

Metasurface lenses are fabricated using membrane projection lithography following a CMOS-compatible process flow. The lenses are 10-mm in diameter and employ 3-dimensional unit cells designed to function in the mid-infrared spectral range.

This paper presents the formulation, implementation, and demonstration of a new, largely phenomenological, model for the damage-free (micro-crack-free) thermomechanical behavior of rock salt. Unlike most salt constitutive models, the new model includes both drag stress (isotropic) and back stress (kinematic) hardening. The implementation utilizes a semi-implicit scheme and a fall-back fully-implicit scheme to numerically integrate the model's differential equations. Particular attention was paid to the initial guesses for the fully-implicit scheme. Of the four guesses investigated, an initial guess that interpolated between the previous converged state and the fully saturated hardening state had the best performance. The numerical implementation was then used in simulations that highlighted the difference between drag stress hardening versus combined drag and back stress hardening. Simulations of multi-stage constant stress tests showed that only combined hardening could qualitatively represent reverse (inverse transient) creep, as well as the large transient strains experimentally observed upon switching from axisymmetric compression to axisymmetric extension. Simulations of a gas storage cavern subjected to high and low gas pressure cycles showed that combined hardening led to substantially greater volume loss over time than drag stress hardening alone.

In order to evaluate the time evolution of avalanche breakdown in wide and ultra-wide bandgap devices, we have developed a cable pulser experimental setup that can evaluate the time-evolution of the terminating impedance for a semiconductor device with a time resolution of 130 ps. We have utilized this pulser setup to evaluate the time-to-breakdown of vertical Gallium Nitride and Silicon Carbide diodes for possible use as protection elements in the electrical grid against fast transient voltage pulses (such as those induced by an electromagnetic pulse event). We have found that the Gallium Nitride device demonstrated faster dynamics compared to the Silicon Carbide device, achieving 90% conduction within 1.37 ns compared to the SiC device response time of 2.98 ns. While the Gallium Nitride device did not demonstrate significant dependence of breakdown time with applied voltage, the Silicon Carbide device breakdown time was strongly dependent on applied voltage, ranging from a value of 2.97 ns at 1.33 kV to 0.78 ns at 2.6 kV. The fast response time (< 5 ns) of both the Gallium Nitride and Silicon Carbide devices indicate that both materials systems could meet the stringent response time requirements and may be appropriate for implementation as protection elements against electromagnetic pulse transients.

Neural networks (NN)s have been increasingly proposed as surrogates for approximation of systems with computationally expensive physics for rapid online evaluation or exploration. As these surrogate models are integrated into larger optimization problems used for decision making, there is a need to verify their behavior to ensure adequate performance over the desired parameter space. We extend the ideas of optimization-based neural network verification to provide guarantees of surrogate performance over the feasible optimization space. In doing so, we present formulations to represent neural networks within decision-making problems, and we develop verification approaches that use model constraints to provide increasingly tight error estimates. We demonstrate the capabilities on a simple steady-state reactor design problem.

Frequent changes in penetration levels of distributed energy resources (DERs) and grid control objectives have caused the maintenance of accurate and reliable grid models for behind-the-meter (BTM) photovoltaic (PV) system impact studies to become an increasingly challenging task. At the same time, high adoption rates of advanced metering infrastructure (AMI) devices have improved load modeling techniques and have enabled the application of machine learning algorithms to a wide variety of model calibration tasks. Therefore, we propose that these algorithms can be applied to improve the quality of the input data and grid models used for PV impact studies. In this paper, these potential improvements were assessed for their ability to improve the accuracy of locational BTM PV hosting capacity analysis (HCA). Specifically, the voltage- and thermal-constrained hosting capacities of every customer location on a distribution feeder (1,379 in total) were calculated every 15 minutes for an entire year before and after each calibration algorithm or load modeling technique was applied. Overall, the HCA results were found to be highly sensitive to the various modeling deficiencies under investigation, illustrating the opportunity for more data-centric/model-free approaches to PV impact studies.

Area efficient self-correcting flip-flops for use with triple modular redundant (TMR) soft-error hardened logic are implemented in a 12-nm finFET process technology. The TMR flip-flop slave latches self-correct in the clock low phase using Muller C-elements in the latch feedback. These C-elements are driven by the two redundant stored values and not by the slave latch itself, saving area over a similar implementation using majority gate feedback. These flip-flops are implemented as large shift-register arrays on a test chip and have been experimentally tested for their soft-error mitigation in static and dynamic modes of operation using heavy ions and protons. We show how high clock skew can result in susceptibility to soft-errors in the dynamic mode, and explain the potential failure mechanism.

We present optical metrology at the Sandia fog chamber facility. Repeatable and well characterized fogs are generated under different atmospheric conditions and applied for light transport model validation and computational sensing development.

A crucial component of field testing is the utilization of numerical models to better understand the system and the experimental data being collected. Meshing and modeling field tests is a complex and computationally demanding problem. Hexahedral elements cannot always reproduce experimental dimensions leading to grid orientation or geometric errors. Voronoi meshes can match complex geometries without sacrificing orthogonality. As a result, here we present a high-resolution 3D numerical study for the BATS heater test at the WIPP that compares both a standard non-deformed cartesian mesh along with a Voronoi mesh to match field data collected during a salt heater experiment.

Magnetic skyrmions are nanoscale whirls of magnetism that can be propagated with electrical currents. The repulsion between skyrmions inspires their use for reversible computing based on the elastic billiard ball collisions proposed for conservative logic in 1982. In this letter, we evaluate the logical and physical reversibility of this skyrmion logic paradigm, as well as the limitations that must be addressed before dissipation-free computation can be realized.

Applications such as counterfeit identification, quality control, and non-destructive material identification benefit from improved spatial and compositional analysis. X-ray Computed Tomography is used in these applications but is limited by the X-ray focal spot size and the lack of energy-resolved data. Recently developed hyperspectral X-ray detectors estimate photon energy, which enables composition analysis but lacks spatial resolution. Moving beyond bulk homogeneous transmission anodes toward multi-metal patterned anodes enables improvements in spatial resolution and signal-to-noise ratios in these hyperspectral X-ray imaging systems. We aim to design and fabricate transmission anodes that facilitate confirmation of previous simulation results. These anodes are fabricated on diamond substrates with conventional photolithography and metal deposition processes. The final transmission anode design consists of a cluster of three disjoint metal bumps selected from molybdenum, silver, samarium, tungsten, and gold. These metals are chosen for their k-lines, which are positioned within distinct energy intervals of interest and are readily available in standard clean rooms. The diamond substrate is chosen for its high thermal conductivity and high transmittance of X-rays. The feature size of the metal bumps is chosen such that the cluster is smaller than the 100 m diameter of the impinging electron beam in the X-ray tube. This effectively shrinks the X-ray focal spot in the selected energy bands. Once fabricated, our transmission anode is packaged in a stainless-steel holder that can be retrofitted into our existing X-ray tube. Innovations in anode design enable an inexpensive and simple method to improve existing X-ray imaging systems.

We have extended the computational singular perturbation (CSP) method to differential algebraic equation (DAE) systems and demonstrated its application in a heterogeneous-catalysis problem. The extended method obtains the CSP basis vectors for DAEs from a reduced Jacobian matrix that takes the algebraic constraints into account. We use a canonical problem in heterogeneous catalysis, the transient continuous stirred tank reactor (T-CSTR), for illustration. The T-CSTR problem is modelled fundamentally as an ordinary differential equation (ODE) system, but it can be transformed to a DAE system if one approximates typically fast surface processes using algebraic constraints for the surface species. We demonstrate the application of CSP analysis for both ODE and DAE constructions of a T-CSTR problem, illustrating the dynamical response of the system in each case. We also highlight the utility of the analysis in commenting on the quality of any particular DAE approximation built using the quasi-steady state approximation (QSSA), relative to the ODE reference case.

This paper describes how the performance of motion primitive-based planning algorithms can be improved using reinforcement learning. Specifically, we describe and evaluate a framework that autonomously improves the performance of a primitive-based motion planner. The improvement process consists of three phases: exploration, extraction, and reward updates. This process can be iterated continuously to provide successive improvement. The exploration step generates new trajectories, and the extraction step identifies new primitives from these trajectories. These primitives are then used to update rewards for continued exploration. This framework required novel shaping rewards, development of a primitive extraction algorithm, and modification of the Hybrid A* algorithm. The framework is tested on a navigation task using a nonlinear F-16 model. The framework autonomously added 91 motion primitives to the primitive library and reduced average path cost by 21.6 s, or 35.75% of the original cost. The learned primitives are applied to an obstacle field navigation task, which was not used in training, and reduced path cost by 16.3 s, or 24.1%. Additionally, two heuristics for the modified Hybrid A* algorithm are designed to improve effective branching factor.

Heat waves are increasing in severity, duration, and frequency, making historical weather patterns insufficient for assessments of building resilience. This work introduces a stochastic weather generator called the multi-scenario extreme weather simulator (MEWS) that produces credible future heat waves. MEWS calculates statistical parameters from historical weather data and then shifts them using climate projections of increasing severity and frequency. MEWS is demonstrated using the EnergyPlus medium office prototype model for climate zone 4B using five climate scenarios to 2060. The results show how changes in climate and heat waves affect electric loads, peak loads, and thermal comfort with uncertainty.

Variable energy resources (VERs) like wind and solar are the future of electricity generation as we gradually phase out fossil fuel due to environmental concerns. Nations across the globe are also making significant strides in integrating VERs into their power grids as we strive toward a greener future. However, integration of VERs leads to several challenges due to their variable nature and low inertia characteristics. In this paper, we discuss the hurdles faced by the power grid due to high penetration of wind power generation and how energy storage system (ESSs) can be used at the grid-level to overcome these hurdles. We propose a new planning strategy using which ESSs can be sized appropriately to provide inertial support as well as aid in variability mitigation, thus minimizing load curtailment. A probabilistic framework is developed for this purpose, which takes into consideration the outage of generators and the replacement of conventional units with wind farms. Wind speed is modeled using an autoregressive moving average technique. The efficacy of the proposed methodology is demonstrated on the WSCC 9-bus test system.

Neural networks (NN) have become almost ubiquitous with image classification, but in their standard form produce point estimates, with no measure of confidence. Bayesian neural networks (BNN) provide uncertainty quantification (UQ) for NN predictions and estimates through the posterior distribution. As NN are applied in more high-consequence applications, UQ is becoming a requirement. Automating systems can save time and money, but only if the operator can trust what the system outputs. BNN provide a solution to this problem by not only giving accurate predictions and estimates, but also an interval that includes reasonable values within a desired probability. Despite their positive attributes, BNN are notoriously difficult and time consuming to train. Traditional Bayesian methods use Markov Chain Monte Carlo (MCMC), but this is often brushed aside as being too slow. The most common method is variational inference (VI) due to its fast computation, but there are multiple concerns with its efficacy. MCMC is the gold standard and given enough time, will produce the correct result. VI, alternatively, is an approximation that converges asymptotically. Unfortunately (or fortunately), high consequence problems often do not live in the land of asymtopia so solutions like MCMC are preferable to approximations. We apply and compare MCMC-and VI-trained BNN in the context of target detection in hyperspectral imagery (HSI), where materials of interest can be identified by their unique spectral signature. This is a challenging field, due to the numerous permuting effects practical collection of HSI has on measured spectra. Both models are trained using out-of-the-box tools on a high fidelity HSI target detection scene. Both MCMC-and VI-trained BNN perform well overall at target detection on a simulated HSI scene. Splitting the test set predictions into two classes, high confidence and low confidence predictions, presents a path to automation. For the MCMC-trained BNN, the high confidence predictions have a 0.95 probability of detection with a false alarm rate of 0.05 when considering pixels with target abundance of 0.2. VI-trained BNN have a 0.25 probability of detection for the same, but its performance on high confidence sets matched MCMC for abundances >0.4. However, the VI-trained BNN on this scene required significant expert tuning to get these results while MCMC worked immediately. On neither scene was MCMC prohibitively time consuming, as is often assumed, but the networks we used were relatively small. This paper provides an example of how to utilize the benefits of UQ, but also to increase awareness that different training methods can give different results for the same model. If sufficient computational resources are available, the best approach rather than the fastest or most efficient should be used, especially for high consequence problems.

We evaluate the use of reference modules for monitoring effective irradiance in PV power plants, as compared with traditional plane-of-array (POA) irradiance sensors, for PV monitoring and capacity tests. Common POA sensors such as pyranometers and reference cells are unable to capture module-level irradiance nonuniformity and require several correction factors to accurately represent the conditions for fielded modules. These problems are compounded for bifacial systems, where the power loss due to rear side shading and rear-side plane-of-array (RPOA) irradiance gradients are greater and more difficult to quantify. The resulting inaccuracy can have costly real-world consequences, particularly when the data are used to perform power ratings and capacity tests. Here we analyze data from a bifacial single-axis tracking PV power plant, (175.6 MWdc) using 5 meteorological (MET) stations, located on corresponding inverter blocks with capacities over 4 MWdc. Each MET station consists of bifacial reference modules as well pyranometers mounted in traditional POA and RPOA installations across the PV power plant. Short circuit current measurements of the reference modules are converted to effective irradiance with temperature correction and scaling based on flash test or nameplate short circuit values. Our work shows that bifacial effective irradiance measured by pyranometers averages 3.6% higher than the effective irradiance measured by bifacial reference modules, even when accounting for spectral, angle of incidence, and irradiance nonuniformity. We also performed capacity tests using effective irradiance measured by pyranometers and reference modules for each of the 5 bifacial single-axis tracking inverter blocks mentioned above. These capacity tests evaluated bifacial plant performance at ∼3.9% lower when using bifacial effective irradiance from pyranometers as compared to the same calculation performed with reference modules.

Hyperspectral Computed Tomography (HCT) Data is often visualized using dimension reduction algorithms. However, these methods often fail to adequately differentiate between materials with similar spectral signatures. Previous work showed that a combination of image preprocessing, clustering, and dimension reduction techniques can be used to colorize simulated HCT data and enhance the contrast between similar materials. In this work, we evaluate the efficacy of these existing methods on experimental HCT data and propose new improvements to the robustness of these methods. We introduce an automated channel selection method and compare the Feldkamp, Davis, and Kress filtered back-projection (FBP) algorithm with the maximum-likelihood estimation-maximization (MLEM) algorithm in terms of HCT reconstruction image quality and its effect on different colorization methods. Additionally, we propose adaptations to the colorization process that eliminate the need for a priori knowledge of the number distinct materials for material classification. Our results show that these methods generalize to materials in real-world experimental HCT data for both colorization and classification tasks; both tasks have applications in industry, medicine, and security, wherever rapid visualization and identification is needed.

This study presents a method that can be used to gain information relevant to determining the corrosion risk for spent nuclear fuel (SNF) canisters during extended dry storage. Currently, it is known that stainless steel canisters are susceptible to chloride-induced stress corrosion cracking (CISCC). However, the rate of CISCC degradation and the likelihood that it could lead to a through-wall crack is unknown. This study uses well-developed computational fluid dynamics and particle-tracking tools and applies them to SNF storage to determine the rate of deposition on canisters. The deposition rate is determined for a vertical canister system and a horizontal canister system, at various decay heat rates with a uniform particle size distribution, ranging from 0.25 to 25 µm, used as an input. In all cases, most of the dust entering the overpack passed through without depositing. Most of what was retained in the overpack was deposited on overpack surfaces (e.g., inlet and outlet vents); only a small fraction was deposited on the canister itself. These results are provided for generalized canister systems with a generalized input; as such, this technical note is intended to demonstrate the technique. This study is a part of an ongoing effort funded by the U.S. Department of Energy, Nuclear Energy Office of Spent Fuel Waste Science and Technology, which is tasked with doing research relevant to developing a sound technical basis for ensuring the safe extended storage and subsequent transport of SNF. This work is being presented to demonstrate a potentially useful technique for SNF canister vendors, utilities, regulators, and stakeholders to utilize and further develop for their own designs and site-specific studies.

There is a need to perform offline anomaly detection in count data streams to simultaneously identify both systemic changes and outliers, simultaneously. We propose a new algorithmic method, called the Anomaly Detection Pipeline, which leverages common statistical process control procedures in a novel way to accomplish this. The method we propose does not require user-defined control or phase I training data, automatically identifying regions of stability for improved parameter estimation to support change point detection. The method does not require data to be normally distributed, and it detects outliers relative to the regimes in which they occur. Our proposed method performs comparably to state-of-the-art change point detection methods, provides additional capabilities, and is extendable to a larger set of possible data streams than known methods.

In transit visualization offers a desirable approach to performing in situ visualization by decoupling the simulation and visualization components. This decoupling requires that the data be transferred from the simulation to the visualization, which is typically done using some form of aggregation and redistribution. As the data distribution is adjusted to match the visualization’s parallelism during redistribution, the data transport layer must have knowledge of the input data structures to partition or merge them. In this chapter, we will discuss an alternative approach suitable for quickly integrating in transit visualization into simulations without incurring significant overhead or aggregation cost. Our approach adopts an abstract view of the input simulation data and works only on regions of space owned by the simulation ranks, which are sent to visualization clients on demand.

As transistors have been scaled over the past decade, modern systems have become increasingly susceptible to faults. Increased transistor densities and lower capacitances make a particle strike more likely to cause an upset. At the same time, complex computer systems are increasingly integrated into safety-critical systems such as autonomous vehicles. These two trends make the study of system reliability and fault tolerance essential for modern systems. To analyze and improve system reliability early in the design process, new tools are needed for RTL fault analysis.This paper proposes Eris, a novel framework to identify vulnerable components in hardware designs through fault-injection and fault propagation tracking. Eris builds on ESSENT - a fast C/C++ RTL simulation framework - to provide fault injection, fault tracking, and control-flow deviation detection capabilities for RTL designs. To demonstrate Eris' capabilities, we analyze the reliability of the open source Rocket Chip SoC by randomly injecting faults during thousands of runs on four microbenchmarks. As part of this analysis we measure the sensitivity of different hardware structures to faults based on the likelihood of a random fault causing silent data corruption, unrecoverable data errors, program crashes, and program hangs. We detect control flow deviations and determine whether or not they are benign. Additionally, using Eris' novel fault-tracking capabilities we are able to find 78% more vulnerable components in the same number of simulations compared to RTL-based fault injection techniques without these capabilities. We will release Eris as an open-source tool to aid future research into processor reliability and hardening.

Given a graph, finding the distance-2 maximal independent set (MIS-2) of the vertices is a problem that is useful in several contexts such as algebraic multigrid coarsening or multilevel graph partitioning. Such multilevel methods rely on finding the independent vertices so they can be used as seeds for aggregation in a multilevel scheme. We present a parallel MIS-2 algorithm to improve performance on modern accelerator hardware. This algorithm is implemented using the Kokkos programming model to enable performance portability. We demonstrate the portability of the algorithm and the performance on a variety of architectures (x86/ARM CPUs and NVIDIA/AMD GPUs). The resulting algorithm is also deterministic, producing an identical result for a given input across all of these platforms. The new MIS-2 implementation outperforms implementations in state of the art libraries like CUSP and ViennaCL by 3-8x while producing similar quality results. We further demonstrate the benefits of this approach by developing parallel graph coarsening scheme for two different use cases. First, we develop an algebraic multigrid (AMG) aggregation scheme using parallel MIS-2 and demonstrate the benefits as opposed to previous approaches used in the MueLu multigrid package in Trilinos. We also describe an approach for implementing a parallel multicolor 'cluster' Gauss-Seidel preconditioner using this MIS-2 coarsening, and demonstrate better performance with an efficient, parallel, mul-ticolor Gauss-Seidel algorithm.

Effects of gamma and proton irradiation, and of forward bias minority carrier injection, on minority carrier diffusion and photoresponse were investigated for long-wave (LW) and mid-wave (MW) infrared detectors with engineered majoritycarrier barriers. The LWIR detector was a type-II GaSb/InAs strained-layer superlattice pBiBn structure. The MWIR detector was a InAsSb/AlAsSb nBp structure without superlattices. Room temperature gamma irradiations degraded the minority carrier diffusion length of the LWIR structure, and minority carrier injections caused dramatic improvements, though there was little effect from either treatment on photoresponse. For the MWIR detector, effects of room temperature gamma irradiation and injection on minority carrier diffusion and photoresponse were negligible. Subsequently, both types of detectors were subjected to gamma irradiation at 77 K. In-situ photoresponse was unchanged for the LWIR detectors, while that for the MWIR ones decreased 19% after cumulative dose of ~500 krad(Si). Minority carrier injection had no effect on photoresponse for either. The LWIR detector was then subjected to 4 Mrad(Si) of 30 MeV proton irradiation at 77 K, and showed a 35% decrease in photoresponse, but again no effect from forward bias injection. These results suggest that photoresponse of the LWIR detectors is not limited by minority carrier diffusion.

Transportation of sodium-bonded spent fuel appears to present no unique challenges. Storage systems for this fuel should be designed to keep water, both liquid and vapor, from contacting the spent fuel. This fuel is not suitable for geologic disposal; therefore, how the spent sodium bonded fuel will be processed and the characteristics of the final disposal waste form(s) need to be considered. TRISO spent fuel appears to present no unique challenges in terms of transportation, storage, or disposal. If the graphite block is disposed of with the TRISO spent fuel, the 14C and 3H generated would need to be considered in the postclosure performance assessment. Salt waste from the molten salt reactor has yet to be transported or stored and might be a challenge to dispose of in a non-salt repositories. Like sodium-bonded spent fuel, how the salt will be treated and the characteristics of the final disposal waste form(s) need to be considered. In addition, radiolysis in the frozen salt waste form continues to generate gas, which presents a hazard. Both HALEU and high-enriched uranium SNF are currently being stored and transported by the DOE. Disposal of fuels with enrichments greater than 5% was included in the disposal plan for Yucca Mountain. The increased potential for criticality associated with the higher enriched SNF is mitigated by additional criticality control measures. Fuels that are similar to some ATFs were part of the disposal plan for Yucca Mountain. Some of the properties of these fuels (swelling, generation of 14C) would have to be considered as part of a postclosure performance assessment.

Abstract not provided.

The goal of this paper is to present a set of measurements from a benchmark structure containing two bolted joints to support future efforts to predict the damping due to the joints and to model nonlinear coupling between the first two elastic modes. Bolted joints introduce nonlinearities in structures, typically causing a softening in the natural frequency and an increase in damping because of frictional slip between the contact interfaces within the joint. These nonlinearities pose significant challenges when characterizing the response of the structure under a large range of load amplitudes, especially when the modal responses become coupled, causing the effective damping and natural frequency to not only depend on the excitation amplitude of the targeted mode, but also the relative amplitudes of other modes. In this work, two nominally identical benchmark structures, known in some prior works as the S4 beam, are tested to characterize their nonlinear properties for the first two elastic modes. Detailed surface measurements are presented and validated through finite element analysis and reveal distinct contact interactions between the two sets of beams. The free-free test structures are excited with an impact hammer and the transient response is analyzed to extract the damping and frequency backbone curves. A range of impact amplitudes and drive points are used to isolate a single mode or to excite both modes simultaneously. Differences in the nonlinear response correlate with the relative strength of the modes that are excited, allowing one to characterize mode coupling. Each of the beams shows different nonlinear properties for each mode, which is attributed to the different contact pressure distributions between the parts, although the mode coupling relationship is found to be consistent between the two. The test data key finding are presented in this paper and the supporting data is available on a public repository for interested researchers.

Density fluctuations in compressible turbulent boundary layers cause aero-optical distortions that affect the performance of optical systems such as sensors and lasers. The development of models for predicting the aero-optical distortions relies on theory and reference data that can be obtained from experiments and time-resolved simulations. This paper reports on wall-modeled large-eddy simulations of turbulent boundary layers over a flat plate at Mach 3.5, 7.87, and 13.64. The conditions for the Mach 3.5 case match those for the DNS presented by Miller et al.1 The Mach 7.87 simulation match those inside the Hypersonic Wind Tunnel at Sandia National Laboratories. For the Mach 13.64, the conditions inside the Arnold Engineering Development Complex Hypervelocity Tunnel 9 are matched. Overall, adequate agreement of the velocity and temperature as well as Reynolds stress profiles with reference data from direct numerical simulations is obtained for the different Mach numbers. For all three cases, the normalized root-mean-square optical path difference was computed and compared with data obtained from the reference direct numerical simulations and experiments, as well as predictions obtained with a semi-analytical relationship by Notre Dame University. Above Mach five, the normalized path difference obtained from the simulations is above the model prediction. This provides motivation for future work aimed at evaluating the assumptions behind the Notre Dame model for hypersonic boundary layer flows.

Iterative methods for solving linear systems serve as a basic building block for computational science. The computational cost of these methods can be significantly influenced by the round-off errors that accumulate as a result of their implementation in finite precision. In the extreme case, round-off errors that occur in practice can completely prevent an implementation from satisfying the accuracy and convergence behavior prescribed by its underlying algorithm. In the exascale era where cost is paramount, a thorough and rigorous analysis of the delay of convergence due to round-off should not be ignored. In this paper, we use a small model problem and the Jacobi iterative method to demonstrate how the Coq proof assistant can be used to formally specify the floating-point behavior of iterative methods, and to rigorously prove the accuracy of these methods.

Decarbonizing natural gas networks is a challenging enterprise. Replacing natural gas with renewable hydrogen is one option under global consideration to decarbonize heating, power and residential uses of natural gas. Hydrogen is known to degrade fatigue and fracture properties of structural steels, including pipeline steels. In this study, we describe environmental testing strategies aimed at generating baseline fatigue and fracture trends with efficient use of testing resources. For example, by controlling the stress intensity factor (K) in both K-increasing and K-decreasing modes, fatigue crack growth can be measured for multiple load ratios with a single specimen. Additionally, tests can be designed such that fracture tests can be performed at the conclusion of the fatigue crack growth test, further reducing the resources needed to evaluate the fracture mechanics parameters utilized in design. These testing strategies are employed to establish the fatigue crack growth behavior and fracture resistance of API grade steels in gaseous hydrogen environments. In particular, we explore the effects of load ratio and hydrogen partial pressure on the baseline fatigue and fracture trends of line pipe steels in gaseous hydrogen. These data are then used to test the applicability of a simple, universal fatigue crack growth model that accounts for both load ratio and hydrogen partial pressure. The appropriateness of this model for use as an upper bound fatigue crack growth is discussed.