Publications

Abstract not provided.

The electric power grid is in a state of transition with increasing penetrations of inverter based resources. With power electronics becoming more capable and less expensive, power flow control devices like solid state transformers will become more prevalent. While the advanced capabilities of solid state transformers will improve stability and enable new control approaches, the reliability of solid state transformers will have to be very high to maintain the reliability of the grid today. This paper employs the IEEE 34-bus test feeder configured to represent a future smart grid to explore the impacts of solid state transformers at each node, as well as opportunities for energy storage to improve reliability.

Jurisdictions around the world are enacting and enforcing an increasing number of policies to fight climate change, leading to higher penetration of variable renewable energy (VRE) and energy storage systems (ESSs) in the power grid. One of the biggest challenges associated with this process is the evaluation of the appropriate amount of ESS required to mitigate the variability of the VREs and achieve decarbonization goals of a particular jurisdiction. This report presents methodologies developed and results obtained for determining the minimum amount of ESS required to adequately serve load in a system where fossil fueled generators are being replaced by VREs over the next two decades. This technical analysis is performed by Sandia National Laboratories for the DOE Office of Electricity Energy Storage Program in collaboration with the Illinois Commerce Commission (ICC). The Illinois MISO Zone 4 is used as a case study. Several boundary conditions are investigated in this analysis including capacity adequacy and energy adequacy to determine the quantity of ESS required for MISO Zone 4. Multiple scenarios are designed and evaluated to incorporate the impact of varying capacity values of VREs and on the resource adequacy of the system. Several retirement scenarios involving fossil-fueled assets are also considered. Based on the current plans of new additions and retirements of generating assets, the results of the technical analysis indicate that Illinois MISO Zone 4 will require a significant quantity of ESS to satisfy their electricity demand over the next two decades.

The penetration of wind power generation into the power grid has been accelerated in recent times due to the aggressive emission targets set by governments and other regulatory authorities. Although wind power has the advantage of being environment-friendly, wind as a resource is intermittent in nature. In addition, wind power contributes little inertia to the system as most wind turbines are connected to the grid via power electronic converters. These negative aspects of wind power pose serious challenges to the frequency security of power systems as penetration increases. In this work, an approach is proposed where an energy storage system (ESS) is used to mitigate frequency security issues of wind-integrated systems. ESSs are well equipped to supply virtual inertia to the grid due to their fast-acting nature, thus replenishing some of the energy storage capability of displaced inertial generation. In this work, a probabilistic approach is proposed to estimate the amount of inertia required by a system to ensure frequency security. Reduction in total system inertia due to the displacement of conventional synchronous generation by wind power generation is considered in this approach, while also taking into account the loss of inertia due to forced outages of conventional units. Monte Carlo simulation is employed for implementing the probabilistic estimation of system inertia. An ESS is then sized appropriately, using the system swing equation, to compensate for the lost inertia. The uncertainty associated with wind energy is modeled into the framework using an autoregressive moving average technique. Effects of increasing the system peak load and changing the wind profile on the expected system inertia are studied to illustrate various factors that might affect system frequency security. The proposed method is validated using the IEEE 39-bus test system.

Penetration of wind energy has increased significantly in the power grid in recent times. Although wind is abundant, environment-friendly, and cheap, it is variable in nature and does not contribute to system inertia as much as conventional synchronous generators. These negative characteristics of wind lead to concerns over the frequency stability of power systems. This paper proposes a planning strategy to improve grid frequency stability by jointly deploying energy storage systems (ESSs) and geographical distribution of wind power. ESSs can provide inertial support to the grid by rapidly injecting active power into the system. At the same time, geographical separation/distribution of wind power can reduce wind power output variability and improve the inertia contribution from wind farms. The ESSs are sized based on the balance inertia needed for frequency stability, obtained using an analytical method and a mixed timing Monte Carlo simulation (MCS) based framework. The effect of the distribution of wind power across geographical regions is incorporated into the framework to study possible reductions in the ESS size while maintaining the system frequency stability. The proposed strategy is implemented on the modified WSCC 9-bus system.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Variable energy resources (VERs) like wind and solar are the future of electricity generation as we gradually phase out fossil fuel due to environmental concerns. Nations across the globe are also making significant strides in integrating VERs into their power grids as we strive toward a greener future. However, integration of VERs leads to several challenges due to their variable nature and low inertia characteristics. In this paper, we discuss the hurdles faced by the power grid due to high penetration of wind power generation and how energy storage system (ESSs) can be used at the grid-level to overcome these hurdles. We propose a new planning strategy using which ESSs can be sized appropriately to provide inertial support as well as aid in variability mitigation, thus minimizing load curtailment. A probabilistic framework is developed for this purpose, which takes into consideration the outage of generators and the replacement of conventional units with wind farms. Wind speed is modeled using an autoregressive moving average technique. The efficacy of the proposed methodology is demonstrated on the WSCC 9-bus test system.

The penetration of renewable energy resources (RER) and energy storage systems (ESS) into the power grid has been accelerated in recent times due to the aggressive emission and RER penetration targets. The Integrated resource planning (IRP) framework can help in ensuring long-term resource adequacy while satisfying RER integration and emission reduction targets in a cost-effective and reliable manner. In this paper, we present pIRP (probabilistic Integrated Resource Planning), an open-source Python-based software tool designed for optimal portfolio planning for an RER and ESS rich future grid and for addressing the capacity expansion problem. The tool, which is planned to be released publicly, with its ESS and RER modeling capabilities along with enhanced uncertainty handling make it one of the more advanced non-commercial IRP tools available currently. Additionally, the tool is equipped with an intuitive graphical user interface and expansive plotting capabilities. Impacts of uncertainties in the system are captured using Monte Carlo simulations and lets the users analyze hundreds of scenarios with detailed scenario reports. A linear programming based architecture is adopted which ensures sufficiently fast solution time while considering hundreds of scenarios and characterizing profile risks with varying levels of RER and ESS penetration levels. Results for a test case using data from parts of the Eastern Interconnection are provided in this paper to demonstrate the capabilities offered by the tool.