Publications

Legacy and modern-day ablation codes typically assume equilibrium pyrolysis gas chemistry. Yet, experimental data suggest that speciation from resin decomposition is far from equilibrium. A thermal and chemical kinetic study was performed on pyrolysis gas advection through a porous char, using the Theoretical Ablative Composite for Open Testing (TACOT) as a demonstrator material. The finite-element tool SIERRA/ Aria simulated the ablation of TACOT under various conditions. Temperature and phenolic decomposition rates generated from Aria were applied as inputs to a simulated network of perfectly stirred reactors (PSRs) in the chemical solver Cantera. A high-fidelity combustion mechanism computed the gas composition and thermal properties of the advecting pyrolyzate. The results indicate that pyrolysis gases do not rapidly achieve chemical equilibrium while traveling through the simulated material. Instead, a highly chemically reactive zone exists in the ablator between 1400 and 2500 K, wherein the modeled pyrolysis gases transition from a chemically frozen state to chemical equilibrium. These finite-rate results demonstrate a significant departure in computed pyrolysis gas properties from those derived from equilibrium solvers. Under the same conditions, finite-rate-derived gas is estimated to provide up to 50% less heat absorption than equilibrium-derived gas. This discrepancy suggests that nonequilibrium pyrolysis gas chemistry could substantially impact ablator material response models.

Legacy and modern-day ablation codes typically assume equilibrium pyrolysis gas chemistry. Yet, experimental data suggest that speciation from resin decomposition is far from equilibrium. A thermal and chemical kinetic study was performed on pyrolysis gas advection through a porous char, using the Theoretical Ablative Composite for Open Testing (TACOT) as a demonstrator material. The finite-element tool SIERRA/ Aria simulated the ablation of TACOT under various conditions. Temperature and phenolic decomposition rates generated from Aria were applied as inputs to a simulated network of perfectly stirred reactors (PSRs) in the chemical solver Cantera. A high-fidelity combustion mechanism computed the gas composition and thermal properties of the advecting pyrolyzate. The results indicate that pyrolysis gases do not rapidly achieve chemical equilibrium while traveling through the simulated material. Instead, a highly chemically reactive zone exists in the ablator between 1400 and 2500 K, wherein the modeled pyrolysis gases transition from a chemically frozen state to chemical equilibrium. These finite-rate results demonstrate a significant departure in computed pyrolysis gas properties from those derived from equilibrium solvers. Under the same conditions, finite-rate-derived gas is estimated to provide up to 50% less heat absorption than equilibrium-derived gas. This discrepancy suggests that nonequilibrium pyrolysis gas chemistry could substantially impact ablator material response models.

This work introduces a comprehensive simulation tool that provides a robust 1D Schrödinger - Poisson solver for modeling the electrostatics of heterostructures with an arbitrary number of layers, and non-uniform doping profiles along with the treatment of partial ionization of dopants at low temperatures. The effective masses are derived from the first-principles calculations. The solver is used to characterize three Ge1-xSnx/Ge heterostructures with non-uniform doping profiles and determine the subband structure at various temperatures. The simulation results of the sheet carrier densities show excellent agreement with the experimentally extracted data, thus demonstrating the capabilities of the solver.

In [R. J. Baraldi and D. P. Kouri, Mathematical Programming, (2022), pp. 1-40], we introduced an inexact trust-region algorithm for minimizing the sum of a smooth nonconvex and nonsmooth convex function. The principle expense of this method is in computing a trial iterate that satisfies the so-called fraction of Cauchy decrease condition—a bound that ensures the trial iterate produces sufficient decrease of the subproblem model. In this paper, we expound on various proximal trust-region subproblem solvers that generalize traditional trust-region methods for smooth unconstrained and convex-constrained problems. We introduce a simplified spectral proximal gradient solver, a truncated nonlinear conjugate gradient solver, and a dogleg method. We compare algorithm performance on examples from data science and PDE-constrained optimization.

In today's communication landscape there are multiple technologies and protocols used for communication between end devices. Within security paradigms for these protocols, integrity management is a common goal of system designers. Communication protocols focused on maintaining message integrity can provide assurance that some received data has not been altered or tampered with. While integrity is often coupled with confidentiality in protocol design, this analysis focuses on an evaluation of only integrity protocols. This work outlines various ways message integrity may be preserved with respect to high performance operational technology (OT) systems. It describes a series of experiments and an evaluation framework used to evaluate the performance of the identified integrity approaches regarding common system design goals. Finally, it addresses the testing environment utilized and closes the work with a summary of experimental results.

Surrogate model development is a critical step for uncertainty quantification or other sample-intensive tasks for complex computational models. In this work we develop a multi-output surrogate form using a class of neural networks (NNs) that employ shortcut connections, namely Residual NNs (ResNets). ResNets are known to regularize the surrogate learning problem and improve the efficiency and accuracy of the resulting surrogate. Inspired by the continuous, Neural ODE analogy, we augment ResNets with weight parameterization strategy with respect to ResNet depth. Weight-parameterized ResNets regularize the NN surrogate learning problem and allow better generalization with a drastically reduced number of learnable parameters. We demonstrate that weight-parameterized ResNets are more accurate and efficient than conventional feed-forward multi-layer perceptron networks. We also compare various options for parameterization of the weights as functions of ResNet depth. We demonstrate the results on both synthetic examples and a large scale earth system model of interest.

Engineering and applied science rely on computational experiments to rigorously study physical systems. The mathematical models used to probe these systems are highly complex, and sampling-intensive studies often require prohibitively many simulations for acceptable accuracy. Surrogate models provide a means of circumventing the high computational expense of sampling such complex models. In particular, polynomial chaos expansions (PCEs) have been successfully used for uncertainty quantification studies of deterministic models where the dominant source of uncertainty is parametric. We discuss an extension to conventional PCE surrogate modeling to enable surrogate construction for stochastic computational models that have intrinsic noise in addition to parametric uncertainty. We develop a PCE surrogate on a joint space of intrinsic and parametric uncertainty, enabled by Rosenblatt transformations, which are evaluated via kernel density estimation of the associated conditional cumulative distributions. Furthermore, we extend the construction to random field data via the Karhunen-Loève expansion. We then take advantage of closed-form solutions for computing PCE Sobol indices to perform a global sensitivity analysis of the model which quantifies the intrinsic noise contribution to the overall model output variance. Additionally, the resulting joint PCE is generative in the sense that it allows generating random realizations at any input parameter setting that are statistically approximately equivalent to realizations from the underlying stochastic model. The method is demonstrated on a chemical catalysis example model and a synthetic example controlled by a parameter that enables a switch from unimodal to bimodal response distributions.

Understanding and containing hydrogen isotope diffusion is crucial for many nuclear applications. In situ experiments have consistently shown that radiation significantly enhances isotope diffusion in austenitic stainless steels. Despite extensive research, the mechanism behind this phenomenon remains elusive, as most radiation-induced defects (e.g., vacancies, dislocations, and grain boundaries) typically trap hydrogen, thereby slowing diffusion. While grain boundaries may increase in-plane diffusivity and interstitials may enhance diffusion due to material swelling, these effects are relatively minor. Utilizing an Fe-Ni-Cr-H interatomic potential for stainless steels, we conducted extensive molecular dynamics simulations to investigate the origins of radiation-enhanced diffusion. Our findings reveal that when a system is resolidified, mimicking defects created by radiation displacements, the resulting structure contains a mixture of phases, boundaries, and dislocation networks. This defective structure significantly increases hydrogen diffusivity, enhancing it by approximately 1.7 times at 900 K. These results suggest that the complex defect structures formed during radiation displacements are the primary drivers of the observed diffusion enhancement, providing valuable insights into the mechanisms underlying radiation-enhanced diffusion in nuclear materials.

There is growing interest to extend low-rank matrix decompositions to multi-way arrays, or tensors. One fundamental low-rank tensor decomposition is the canonical polyadic decomposition (CPD). The challenge of fitting a low-rank, nonnegative CPD model to Poisson-distributed count data is of particular interest. Several popular algorithms use local search methods to approximate the maximum likelihood estimator (MLE) of the Poisson CPD model. This work presents two new algorithms that extend state-of-the-art local methods for Poisson CPD. Hybrid GCP-CPAPR combines Generalized Canonical Decomposition (GCP) with stochastic optimization and CP Alternating Poisson Regression (CPAPR), a deterministic algorithm, to increase the probability of converging to the MLE over either method used alone. Restarted CPAPR with SVDrop uses a heuristic based on the singular values of the CPD model unfoldings to identify convergence toward optimizers that are not the MLE and restarts within the feasible domain of the optimization problem, thus reducing overall computational cost when using a multi-start strategy. We provide empirical evidence that indicates our approaches outperform existing methods with respect to converging to the Poisson CPD MLE.

The discrimination problem in seismology aims to accurately classify different underground source types based on local, regional, and/or teleseismic observations of ground motion. Typical discriminant approaches are rooted in fundamental, physics-based differences in radiation pattern or wave excitation, which can be frequency-dependent and may not make use of the full waveform. In this article, we explore whether phase and amplitude distances derived from dynamic time warping (DTW) and elastic shape analysis (ESA) can inform event discrimination. We demonstrate the ability to distinguish underground point sources using synthetic waveforms calculated for a 1D Earth model and various source mechanisms. We then apply the method to recorded data from events in the Korean Peninsula, which includes declared nuclear explosions, a collapse event, and naturally occurring earthquakes. Phase and amplitude distances derived from DTW and ESA are then used to classify the event types via dendrogram and k-nearest-neighbor clustering analyses. Using information from the full waveform, we show how different underground sources can be distinguished at regional distances. We highlight the potential of these nonlinear alignment algorithms for discrimination and comment on ways we can extend the framework presented here.

The Direct Simulation Monte Carlo (DSMC) method is utilized to numerically simulate test conditions in the Sandia Hypersonic Shock Tunnel (HST) facility. The setup consists of a hypersonic flow over a cylinder with the freestream at flow speeds of 4-5 km/s in a state of thermal non-equilibrium. We present comparisons of temperatures derived from spectrographic measurements of Nitric Oxide (NO) emission in the ultraviolet (UV) region with predictions from the DSMC solver. Furthermore, we present differences between spectrally banded imaging measurements taken during experiments in the infrared (IR) and UV regions with those obtained from numerical simulations.

We introduce a new training algorithm for deep neural networks that utilize random complex exponential activation functions. Our approach employs a Markov chain Monte Carlo sampling procedure to iteratively train network layers, avoiding global and gradient-based optimization while maintaining error control. It consistently attains the theoretical approximation rate for residual networks with complex exponential activation functions, determined by network complexity. Additionally, it enables efficient learning of multiscale and high-frequency features, producing interpretable parameter distributions. Despite using sinusoidal basis functions, we do not observe Gibbs phenomena in approximating discontinuous target functions.

Objective: Real-time determination of human kinematics and kinetics could advance biomechanics research and enable valuable applications of biofeedback and generalizable exoskeleton control. This work aims to investigate a taskindependent, user-independent method for obtaining precise realtime joint state estimation across lower-body joints during a wide variety of tasks. Methods: We developed a generalizable sensing approach using a suit comprised of inertial measurement units (IMUs) and pressure insoles. With the suit, we collected a dataset of 33 tasks commonly performed during construction and hazardous waste cleanup (N = 10). We then trained deep learning user-independent, task-agnostic models to estimate joint lowerbody kinematics and dynamics using only worn sensor data. We likewise computed joint kinematics and dynamics analytically from sensor data to serve as a comparison tool for model results. Results: Our models achieved overall angle estimation root-meansquared-errors (RMSE) of 6.56±.92°, 8.60±1.01°, 7.58±.89°, and 6.00±.73° compared to 13.9±.1.3°, 15.31±1.0°, 10.76±.70°, and 7.56±.48° via analytical methods at the lower back, hip, knee, and ankle, respectively. Likewise, our models achieved overall normalized moment estimation RMSEs of.207±.069 Nm/kg,.242±.044 Nm/kg,.202±.038 Nm/kg, and.193±.034 Nm/kg compared to.306±.036 Nm/kg,.407±.021 Nm/kg, 1.18 ±.022 Nm/kg, and 1.73±.071 Nm/kg via analytical methods at the lower back, hip, knee, and ankle, respectively. Conclusion: These results are comparable to other state-of-the-art wearable sensing systems, establishing deep learning as a viable sensing approach that generalizes to new users and tasks. Significance: This work shows promise for enabling accurate real-world biomechanical data collection and enhancement of biofeedback systems and wearable robot control.

Influence in the post social media, world-is-flat online social landscape, has gone through an apocalypse level transformation. Trust, the critical component for social cohesion, now develops in a vastly different context from most of human history. We present MADmax, a multi-agent opinion dynamics simulation that utilizes reinforcement learning to evaluate influence strategies in trust-driven social networks. The simulation incorporates a real-world calibrated system dynamics trust model to mediate influence in an agent-based model (ABM) that simulates the evolution of opinions. We employ multi-agent reinforcement learning (MARL) to discover and evaluate influence strategies. Agents collaborate on influence teams, and results offer insight into intra-team competition and inter-team coordination. Additionally, we identify possible indicators of influence campaigns, such as increases in extremism.

The sensitivity analysis algorithms that have been developed by the radiation transport community in multiple neutron transport codes, such as MCNP and SCALE, are extensively used by fields such as the nuclear criticality community. However, these techniques have seldom been considered for electron transport applications. In the past, the differential-operator method with the single scatter capability has been implemented in Sandia National Laboratories’ Integrated TIGER Series (ITS) coupled electron-photon transport code. This work is meant to extend the available sensitivity estimation techniques in ITS by implementing an adjoint-based sensitivity method, GEAR-MC, to strengthen its sensitivity analysis capabilities. To ensure the accuracy of this method being extended to coupled electron-photon transport, it is compared against the central-difference and differential-operator methodologies to estimate sensitivity coefficients for an experiment performed by McLaughlin and Hussman. Energy deposition sensitivities were calculated using all three methods, and the comparison between them has provided confidence in the accuracy of the newly implemented method. Unlike the current implementation of the differential-operator method in ITS, the GEAR-MC method was implemented with the option to calculate the energy-dependent energy deposition sensitivities, which are the sensitivity coefficients for energy deposition tallies to energy-dependent cross sections. The energy-dependent cross sections could be the cross sections for the material, elements in the material, or reactions of interest for the element. These sensitivities were compared to the energy-integrated sensitivity coefficients and exhibited a maximum percentage difference of 2.15%.

Power systems have been analyzed and studied as purely physical systems for a long time. Such efforts were critical to the establishment of the power grid as it is today. However, with the increased interest in the integration of renewable energy, the grid is experiencing more vulnerabilities to its operation, stability, and resiliency from the cyber realm. As such, it is crucial to understand the cyber-physical power system interdependencies. In this paper, we advance a Bayesian Network generation algorithm, called CyberDep. CyberDep quantifies cyber-physical interdependencies through conditional probability calculations and aids in analyzing bidirectional data flow dependencies and n-to-1 nodal connections between elements. CyberDep is implemented on a dataset of the cyber-physical emulation of the WSCC 9-bus system, which includes running physical, cyber, and cyber-physical disturbances on the system. The results showcase an improved interdependency quantification and visualization of the n-to-1 probabilistic relationships between the physical and cyber system components.

Carbon capture, utilization, and storage (CCUS) is an important pathway for meeting climate mitigation goals. While the economic viability of CCUS is well understood, previous studies do not evaluate the economic feasibility of carbon capture and storage (CCS) in the Permian Basin specifically regarding the new Section 45Q tax credits. We developed a technoeconomic analysis method, evaluated the economic feasibility of CCS at the acid gas injection (AGI) wells, and assessed the implication of Section 45Q tax credits for CCS at the AGIs. We find that the compressors, well depth, and the permit and monitoring costs drive the facility costs. Compressors are the predominant contributors to capital and operating expenditure driving the levelized cost of CO2 storage. Strategic cost reduction measures identified include 1) sourcing of low-cost electricity and 2) optimizing operational efficiency in well operations. In evaluating the impact of the tax credits on CCS projects, facility scale proved decisive. We found that facilities with an annual injection rate exceeding 10,000 MT storage capacity demonstrate economic viability contingent upon the procurement of inputs at the least cost. The new construction of AGI wells were found to be economically viable at a storage capacity of 100,000 MT. The basin is heavily focused on CCUS (tax credit – $65/MT CO2), which overshadows CCS ($85/MT CO2) opportunities. Balancing the dual objectives of CCS and CCUS requires planning and coordination for optimal resource and pore space utilization to attain the basin's decarbonization potential. We also found that CCS on AGI is a lower cost CCS option as compared to CCS on other industries.

The complexity of the semiconductor design lifecycle and globalized manufacturing process creates concern over the threat of deliberate malicious alterations, or hardware Trojans, being inserted into microelectronic designs. This has resulted in a significant corpus of hardware Trojan research including Trojan design and benchmarking efforts and development of corresponding metrics and detection and prevention techniques, over the last two decades. In this survey, we first highlight efforts in Trojan design and benchmarking, followed by a cataloging of seminal and recent works in Trojan detection and prevention and their accompanied metrics. Given the volume of literature in this field, this survey considers only pre-silicon techniques. We make this distinction between pre- and post-silicon to properly scope and provide appropriate context into the capabilities of existing hardware Trojan literature. Each major section (design, prevention, and detection) is accompanied by insights, and common pitfalls, which we highlight can be addressed by future research.

We derive a new Galerkin quadrature (GQ) method for S (Formula presented.) calculations that differs from the two methods preceding it in that a matrix inverse for an (Formula presented.) matrix, where (Formula presented.) is the number of directions in the quadrature set, is no longer required. Galerkin quadrature methods are designed for calculations with highly anisotropic scattering. Such methods are not simply special angular quadratures but also are methods for representing the S (Formula presented.) scattering source that offers several advantages relative to the standard scattering source representation when highly truncated Legendre cross-section expansions must be used. Galerkin quadrature methods are also useful when the scattering is moderately anisotropic, but the quadrature being used is not sufficiently accurate for the order of the scattering source expansion that is required. We derive the new method and present computational results showing that its performance for two challenging problems is comparable to those of the two GQ methods that preceded it.

The impact of high-altitude electromagnetic pulse events on the electric grid is not fully understood, and validated modeling of mitigations, such as lightning surge arresters (LSAs) is necessary to predict the propagation of very fast transients on the grid. Experimental validation of high frequency models for surge arresters is an active area of research. This article serves to experimentally validate a previously defined ZnO LSA model using four metal-oxide varistor pucks and nanosecond scale pulses to measure voltage and current responses. The SPICE circuit models of the pucks showed good predictability when compared to the measured arrester response when accounting for a testbed inductance of approximately 100 nH. Additionally, the comparatively high capacitance of low-profile arresters show a favorable response to high-speed transients that indicates the potential for effective electromagnetic pulse mitigation with future materials design.

The Direct Simulation Monte Carlo (DSMC) method is utilized to numerically simulate test conditions in the Sandia Hypersonic Shock Tunnel (HST) facility. The setup consists of a hypersonic flow over a cylinder with the freestream at flow speeds of 4-5 km/s in a state of thermal non-equilibrium. We present comparisons of temperatures derived from spectrographic measurements of Nitric Oxide (NO) emission in the ultraviolet (UV) region with predictions from the DSMC solver. Furthermore, we present differences between spectrally banded imaging measurements taken during experiments in the infrared (IR) and UV regions with those obtained from numerical simulations.

We demonstrate magnetic anomaly detection (MAD) using an array of 24 commercial induction coil magnetometers with stand-off distances from a pulsed 99.8(3) kA·m2 magnetic dipole source of 260-1200 m. The sparse array is used to estimate the magnetic dipole location, magnitude, and orientation. We demonstrate how independent component analysis (ICA) improves the accuracy and precision of the magnetometer array when estimating the dipole parameters. Using sensor responses recorded from individual source pulses, we estimate the dipole location to within 29 ±; 2 m, the magnitude to within 3 ± kA ·m2, and dipole orientation error to within 19 ± 0.6°.

Airborne radar for intelligence, surveillance, and reconnaissance has become an indispensable tool, found in both crewed and uncrewed platforms. These radars are usually multimode to engage missions for all manner of phenomenology detection and characterization, and have a long history of success for their intended purposes. Nevertheless, the advance of technology is facilitating enhanced exploitation of generally existing capabilities, as well as enhanced utility with new capabilities. The author identifies several areas of promising research and subsequent development that would provide significant and substantial capability enhancements.

The increased prevalence of distributed energy resources and microgrids has led to highly variable fault current levels and system configurations in distribution networks. To improve power system resilience during severe weather events, microgrids can be networked outside of their original boundaries to restore service to additional customers. Traditional protective relaying schemes may not be equipped to handle these contingencies. Optimal Adaptive Protection (OAP) algorithms can provide more robust system protection during such events by monitoring the network for system state changes and modifying protective relay settings in near real-time. In this paper an OAP algorithm is applied to systems from three different utilities, modeled in OPAL-RT, and connected to hardware-in-the-loop (HIL) relays. Restoration scenarios are considered starting from islanded microgrids and returning to normal operating conditions. By incorporating OAP after any network switching event, protection security is improved throughout the restoration process.

Generative modeling has opened new avenues for solving previously intractable materials design problems. However, these new opportunities are accompanied by a drastic increase in the required amount of training data. This is in stark juxtaposition to the high expense and difficulty in curating such large materials datasets. In this work, we propose a novel framework for integrating generative models within an active learning loop. This enables the training of generative models with datasets significantly smaller than what has previously been demonstrated, providing a direct route for their application in data constrained environments. The functionality of this framework is then demonstrated by addressing the challenge of designing polycrystalline textures associated with target anisotropic mechanical properties. The developed protocol exhibited a cost reduction between 14 to 18 times over a randomly sampled experimental design.

Disordered iron germanium (FeGe) has recently garnered interest as a testbed for a variety of magnetic phenomena as well as for use in magnetic memory and logic applications. This is partially owing to its ability to host skyrmions and antiskyrmions—nanoscale whirlpools of magnetic moments that could serve as information carriers in spintronic devices. In particular, a tunable skyrmion-antiskyrmion system may be created through precise control of the defect landscape in B20-phase FeGe, motivating the development of methods to systematically tune disorder in this material and understand the ensuing structural properties. To this end, we investigate a route for modifying magnetic properties in FeGe. In particular, we irradiate epitaxial B20-phase FeGe films with 2.8 MeV Au4+ ions, which creates a dispersion of amorphized regions that may preferentially host antiskyrmions at densities controlled by the irradiation fluence. To further tune the disorder landscape, we conduct a systematic electron diffraction study with in situ annealing, demonstrating the ability to recrystallize controllable fractions of the material at temperatures ranging from ∼150 to 250 °C. Finally, we describe the crystallization kinetics using the Johnson-Mehl-Avrami-Kolmogorov model, finding that the growth of crystalline grains is consistent with diffusion-controlled one-to-two dimensional growth with a decreasing nucleation rate.

The present article summarizes the submissions to the Tribomechadynamics Research Challenge announced in 2021. The task was a blind prediction of the vibration behavior of a system comprising a thin plate clamped on two sides via bolted joints. Both geometric and frictional contact nonlinearities are expected to be relevant. Provided were the CAD models and technical drawings of all parts as well as assembly instructions. The main objective was to predict the frequency and damping ratio of the lowest-frequency mode as function of the amplitude. Many different prediction approaches were pursued, ranging from well-known methods to very recently developed ones. After the submission deadline, the system has been fabricated and tested. The aim of this article is to evaluate the current state of the art in modeling and vibration prediction, and to provide directions for future methodological advancements.

Water security and climate change are important priorities for communities and regions worldwide. The intersections between water and climate change extend across many environmental and human activities. This Primer is intended as an introduction, grounded in examples, for students and others considering the interactions between climate, water, and society. In this Primer, we summarize key intersections between water and climate across four sectors: environment; drinking water, sanitation, and hygiene; food and agriculture; and energy. We begin with an overview of the fundamental water dynamics within each of these four sectors, and then discuss how climate change is impacting water and society within and across these sectors. Emphasizing the relationships and interconnectedness between water and climate change can encourage systems thinking, which can show how activities in one sector may influence activities or outcomes in other sectors. We argue that to achieve a resilient and sustainable water future under climate change, proposed solutions must consider the water–climate nexus to ensure the interconnected roles of water across sectors are not overlooked. Toward that end, we offer an initial set of guiding questions that can be used to inform the development of more holistic climate solutions. This article is categorized under: Science of Water > Water and Environmental Change Engineering Water > Water, Health, and Sanitation Human Water > Value of Water.

Sandia will construct a cold flow receiver test platform in order to characterize falling particle curtain receivers at commercially relevant scales. While Sandia has extensive experience in R&D of falling particle curtain receivers, most have been at pilot scale and smaller - on the order of 1 MW_th with characteristic dimensions of nominally 1-2 m to adequately collect solar energy from the heliostat field at the National Solar Thermal Test Facility (NSTTF). However, scaling up receivers to commercially relevant scales (25 MW_th and above) will require a thorough understanding of particle curtain dynamics at larger scales, especially longer drop heights, for design certainty. The goal of this project will be to construct a cold falling particle curtain test rig capable of simulating particle characteristics that are expected in a commercial scale CSP plant, namely the drop height, curtain thickness, and particle mass flow rate (normalized by length of curtain). This will enable data collection on curtain opacity and spread, both of which are correlated to receiver efficiency and reliable construction, for commercially relevant scales. It will also permit validation of numerical models that will enable detailed receiver characterization and design past currently validated scales.

This paper presents a methodology for reducing the complexity of large-scale power network models using spectral clustering, aggregation of electrical components, and cost function approximation. Two approaches are explored using unconstrained and constrained spectral clustering to determine areas for effective system reduction. Once the system areas are determined, both loads and generators by type are aggregated, and their new cost function is approximated through polynomial curve-fitting or statistical methods. The performance of reduced networks is evaluated in terms of their ability to follow the true daily cost of the original system over a 24-hour period considering a set of several days. Two test systems are taken as test beds. Application of the methodology to a modified version of the IEEE 39-bus system reduces it from 17 generators to a 4-bus system and 9 generators with about 93% of accuracy. Similarly, the IEEE 118-bus system is reduced from 19 generators to a 3-bus system with three aggregated units achieving over 99% of accuracy. These findings address scalability challenges and enhance accuracy for high and mid-loading level conditions, and by aggregating thermal units with similar cost functions.

Self-assembled quantum dots (QDs) embedded in InGaAs quantum wells (QWs) are used as active regions for photonic-crystal surface-emitting lasers (PCSELs). An epitaxial regrowth method is developed to fabricate the dot-in-well (DWELL) PCSELs. The epitaxial regrowth starts with the growth of a partial laser structure containing bottom cladding, waveguide, active region, and the photonic crystal (PC) layer. The PC layer is patterned to realize the cavity. Subsequently a top cladding layer is regrown to complete the laser structure. During the regrowth of the top cladding layer, the partial laser structure is subjected to high growth temperatures in excess of 600 °C resulting in an unintentional annealing of the active region. This annealing of the active region can alter the QDs by changing their size resulting in a blue shift in photoluminescence (PL) and narrowing PL emission. This effect results in the misaligning of the gain peak and the cavity resonance, resulting in sub-optimal lasing performance. DWELL active regions are known to have better thermal stability compared to both QDs and QWs and could be an ideal candidate for regrown PCSELs. We successfully demonstrate an optically-pumped epitaxially-regrown DWELL PCSEL with an emission wavelength of 1230 nm operating at room temperature. Furthermore, the DWELL active region shows excellent emission wavelength stability and intensity despite the high temperature regrowth process.

Traditional Monte Carlo methods for particle transport utilize source iteration to express the solution, the flux density, of the transport equation as a Neumann series. Our contribution is to show that the particle paths simulated within source iteration are associated with the adjoint flux density and the adjoint particle paths are associated with the flux density. We make our assertion rigorous through the use of stochastic calculus by representing the particle path used in source iteration as a solution to a stochastic differential equation (SDE). The solution to the adjoint Boltzmann equation is then expressed in terms of the same SDE, and the solution to the Boltzmann equation is expressed in terms of the SDE associated with the adjoint particle process. An important consequence is that the particle paths used within source iteration simultaneously provide Monte Carlo samples of the flux density and adjoint flux density in the detector and source regions, respectively. The significant practical implication is that particle trajectories can be reused to obtain both forward and adjoint quantities of interest. To the best our knowledge, the reuse of entire particles paths has not appeared in the literature. Monte Carlo simulations are presented to support the reuse of the particle paths.

Electrochemical random access memory (ECRAM) is an emerging three-terminal nonvolatile memory (NVM) with highly controllable channel conductance which is promising for use as an analog memory (or synapse) in analog in-memory computing (IMC) systems. Energy-efficient analog IMC computing is particularly desirable for power-constrained, high-radiation environments such as satellites. However, little is known about the suitability of ECRAM for use in a total ionizing dose (TID) environment. This work investigates the effect of Co-60 gamma radiation on the channel conductance and noise—two properties critical for analog IMC systems—of a TaOx-based ECRAM up to 17.3 Mrad(SiO2) for both low- and high-channel-conductance state devices. A transient increase in conductance is observed in response to radiation which consists of two elements: an immediate increase in conductivity due to photocurrent and a secondary increase in conductivity, which has a slower rise and saturation and can persist for hours after exposure. This secondary, persistent photoconductivity is attributed to charging caused by hole trapping. These transient effects would not likely occur in a space environment due to the low dose rate compared with this experiment. No permanent change is found in the low conductance state (LCS) following exposure and the minor shift in the high conductance change would be less significant than the regular retention decay in this state. A permanent increase in the random telegraph noise is observed, possibly due to increased traps created in the channel. This work demonstrates that TaOx-based ECRAM is suitable for use in spaceborne analog IMC systems that are subject to significant TID.

In this paper, we propose a learning-based method utilizing the Soft Actor-Critic (SAC) algorithm to train a binary Support Vector Machine (SVM) classifier. This classifier is designed to identify valid input spaces in high-dimensional, highly constrained systems while minimizing the total runtime of offline simulations. The simulations adapt their runtime based on the likelihood that a given training input will be informative to the classifier. Furthermore, we introduce a method for using the trained SAC model to predict whether a desired system input is likely to violate constraints, along with a technique to adjust the input as necessary. Additionally, we explore the potential of this model to detect faults or adversarial attacks within the system. The effectiveness of our approach is demonstrated through various simulations of challenging classification problems and a constrained quadrotor model.

Appearing as one of the key-components of lithium-ion batteries (LIBs), this work specifically focuses on the additive manufacturing (AM) of custom-shape separators, facilitated by the filament material extrusion process, also called fused deposition modeling (FDM). The development and optimization of composite thermoplastic filament feedstocks combining polypropylene and paraffin wax, followed by the 3D printing of the separator membranes is shown. A post-processing step, based on thermal induced phase separation (TIPS), is introduced to promote porosity formation through removal of the paraffin wax sacrificial phase within the 3D printed items. Separators with different polypropylene/paraffin wax ratios are developed and the impact on printability, mechanical strength, porosity, and electrochemical performances, is thoroughly discussed. X-ray micro-computed tomography is employed to assess the geometric fidelity and to detect printing defects in a complex 3D lattice structure. The performance of the 3D printed porous separators is also compared to a commercial separator. This pioneering research establishes a foundation for the creation of porous separators that can adapt to and conform into 3D printed battery architectures with novel form factors, and also creates opportunities for the use of FDM and TIPS for a wide range of applications that employ porous structures beyond the energy storage field.

Tank farm workers involved in nuclear cleanup activities perform physically demanding tasks, typically while wearing heavy personal protective equipment (PPE). Exoskeleton devices have the potential to bring considerable benefit to this industry but have not been thoroughly studied in the context of nuclear cleanup. In this paper, we examine the performance of exoskeletons during a series of tasks emulating jobs performed on tank farms while participants wore PPE commonly deployed by tank farm workers. The goal of this study was to evaluate the effects of commercially available lower-body exoskeletons on a user’s gait kinematics and user perceptions. Three participants each tested three lower-body exoskeletons in a 70-min protocol consisting of level treadmill walking, incline treadmill walking, weighted treadmill walking, a weight lifting session, and a hand tool dexterity task. Results were compared to a no exoskeleton baseline condition and evaluated as individual case studies. The three participants showed a wide spectrum of user preferences and adaptations toward the devices. Individual case studies revealed that some users quickly adapted to select devices for certain tasks while others remained hesitant to use the devices. Temporal effects on gait change and perception were also observed for select participants in device usage over the course of the device session. Device benefit varied between tasks, but no conclusive aggregate trends were observed across devices for all tasks. Evidence suggests that device benefits observed for specific tasks may have been overshadowed by the wide array of tasks used in the protocol.

This paper is concerned with inserting three-dimensional computer-aided design (CAD) geometries into meshes composed of hexahedral elements using a volume fraction representation. An adaptive procedure for doing so is presented. The procedure consists of two steps. The first step performs spatial acceleration using a k-d tree. The second step involves subdividing individual hexahedra in an adaptive mesh refinement (AMR)-like fashion and approximating the CAD geometry linearly (as a plane) at the finest subdivision. The procedure requires only two geometric queries from a CAD kernel: determining whether or not a queried spatial coordinate is inside or outside the CAD geometry and determining the closest point on the CAD geometry’s surface from a given spatial coordinate. We prove that the procedure is second-order accurate for sufficiently smooth geometries and sufficiently refined background meshes. We demonstrate the expected order of accuracy is achieved with several verification tests and illustrate the procedure’s effectiveness for several exemplar CAD geometries.

The Na+ super ion conductor (NaSICON, Na1+xZr2SixP3-xO12) is a solid electrolyte well-known for fast, selective Na+ transport at low temperatures, uniquely enabling sodium-based batteries. Producing high-quality NaSICON from solid-state methods, especially when cost-effective, potentially hygroscopic precursors are used, is not trivial. To understand and eliminate the influence of humidity during processing, a scheme was developed to reproducibly yield a high Na+ conductivity (3.75 mS/cm at 25°C, 81.7 mS/cm at 150°C), high density (97%), and machinable NaSICON without the use of binders, sintering aids, or dopants. Controlled humidity studies over 20%–50% RH coupled with thermal, structural, and electrical analysis reveal that calcination temperatures < 1000°C leave NaSICON processing susceptible to water absorption at > 20% RH due to the presence of hygroscopic Na3PO4 and Na2CO3 during shaping, pressing, and sintering. Water absorption results in NaSICON with lower densities, machinability, and Na+ conductivity, due to impaired intergranular Na+ transport. At the other extreme, fully converting precursor to the NaSICON phase at 1230°C before pressing and sintering leads to poor conductivity and density. By calcining at 1000°C, excellent quality NaSICON may be produced under a range of laboratory environments, enabling low-cost production of high-conductivity, machinable NaSICON necessary the ever-growing energy storage market.

The Open-Source Offshore (OSO) airfoils have been developed for research purposes for offshore wind turbines, offering a set of airfoils that align with modern turbine design requirements and industry design practices without proprietary constraints on research use. The eventual airfoil family will target the IEA 22 MW reference wind turbine, which was originally developed with the FFA airfoils. The two airfoils summarized in Table 1 (OSO-21-WT1 and OSO-30-WT1) started development as part of a family of airfoils being designed to target the IEA 22 MW wind turbine. The criteria used to design these airfoils are summarized in Table 1, which aim to encapsulate requirements of modern airfoils for offshore wind turbine applications, and were developed with feedback from industry and research experts. The airfoils were designed using XFOIL and candidate airfoils were then analyzed in RFOIL, which is considered more accurate than XFoil for high lift predictions of thicker airfoils. The design process for a preliminary family of airfoils is available, including a more detailed explanation of the design requirements and metrics similar to those used for these airfoils. Most of the design criteria are met for these two airfoils, with two exceptions. For both airfoils, the L/D Roughness Loss metric is exceeded (42% > 40% goal) and the desired lift coefficient margin over the design value (“CL_Margin”) was moderately exceeded (0.43 > 0.3) while smooth-stall characteristics (computed) were achieved. Note that all of the metrics were computed using RFOIL, and like other new airfoils, these will need to be experimentally validated at a range of Reynolds numbers. The airfoil coordinates will be shared publicly on Sadia National Laboratories’ public Github repository:

Abstract not provided.

Code verification is an essential part of credibility analysis for computational models. It assesses whether the mathematical model is implemented correctly into the code and whether the numerical methods behave consistently, and is done before solution verification and validation. Robust guidance for code verification exists in the literature. However, there is no known, concise guide for selecting the approach based on the model form that also presents an overview of the common elements. This document was written to address this gap as an accessible reference for beginning a code-verification effort.

Hardware-in-the-Loop (HIL) methodologies for test system development often require simulations capable of running at MHz speeds on FPGAs. The stringent memory and speed constraints necessitate compromises between model fidelity and execution speed. Numerically solving the underlying governing equations represents the highest accuracy, but slowest responding approach. By storing pre-determined results in look-up-tables (LUT), one can balance speed and accuracy.

In recent years, the procurement of essential materials such as Stainless Steels, Ni-Alloys, and Kovar has become increasingly challenging. Lead times for these materials have extended to over 24 months, placing significant stress on the reliability of attaining these alloys. This situation is exacerbated by the supplier’s minimum purchase requirement of excessively large quantities to meet unique purchase order (PO) requirements which is usually above the maximum requirements of Sandia National Laboratories (SNL). Additionally, the reluctance of foundries to engage in small lot development for SNL specific needs further complicates the procurement process. This white paper explores the reconstitution of SNL’ Melt Laboratory as a strategic solution to mitigate these challenges.

Hydrogen Extremely Low Probability of Rupture (HELPR) is a modular probabilistic fracture mechanics modeling platform developed to assess structural integrity of pipelines for transmission and distribution of hydrogen. HELPR couples fatigue and fracture engineering models with probabilistic methods to generate fast predictions and enables quantification of prediction uncertainty and sensitivity. This user manual serves as a guide through the various analysis features HELPR contains.

During the development of high-consequence items, test systems should be capable of differenti ating between test failures resulting from narrowly missing requirements versus those indicating potentially catastrophic faults. In many instances, classifying the data corresponds to simply identifying whether measured waveforms have approximately the anticipated shape. Cast in this light, the problem reduces to converting raw data into a form optimal for use with neural network classifiers. This manuscript investigates different means of representing raw data for image classification. Raw data plots and Short Time Fourier Transform (STFT) spectrograms are classified by both custom built, small-scale, Convolution Neural Networks (CNN) and open-source, multi-million parameter, pre-trained deep CNNs. In the case of time varying frequency content, the STFTs provide images with greater detail and can be accurately classified with simpler networks. This requires less mem ory and runs faster than classifying the raw data using the more sophisticated options—making STFTs optimal for applications with memory constraints. STFTs are not a panacea. In some cases the time-domain signal contains useful information that should not be discarded. Rather than using raw data or STFTs, the images can be constructed from both by using red and green channels of an RGB image to visualize the real and imaginary components of the transform, with the raw data occupying the blue channel.

Over the past six years, an informal working group has developed to investigate existing sensitivity analysis methods, examine new methods, and identify best practices. The focus is on the use of sensitivity analysis in case studies involving geologic disposal of spent nuclear fuel or nuclear waste. Three additional case studies are presented in this Volume 2 report, including more nonlinear behavior, outputs which exhibit bifurcation, regime changes, and nested sampling.

Continued development of the additive conductivity material model [1], used to simulate changes in heat transfer that occurs in void generating foam decomposition, has resulted in an improved model and new features. The previous version of the model was calibrated against the Aria Bulk Fluid Element (BFE) solution and proposed a third-order polynomial correction term best captured the increased heat transfer due to voids in the foam. An investigation of the Fuego Conjugate Heat Transfer (CHT) and Aria BFE solutions at several geometries revealed the CHT solution and BFE solution had differing behavior across length scales, especially at smaller scales. Five calibration studies, using the Fuego CHT as the calibration data, were carried out with polynomial functions of 4-th, 3-rd, 2-nd, 1-st and 0-th orders to determine the best correction function that generalized well across length scales. Each polynomial function was calibrated/trained on six different sized geometries and then tested on three uniquely sized geometries. This study revealed that the 1-st order additive conductivity model performed the best. A new feature of void formation scaling was implemented to more realistically capture the heat transfer as voids are created. A scaling term was added to the model to activate the conductivity correction as decomposition progresses.

Code verification is an essential part of credibility analysis for computational models. It assesses whether the mathematical model is implemented correctly into the code and whether the numerical methods behave consistently, and is done before solution verification and validation. Robust guidance for code verification exists in the literature. However, there is no known, concise guide for selecting the approach based on the model form that also presents an overview of the common elements. This document was written to address this gap as an accessible reference for beginning a code-verification effort.

Vertical-axis wind turbines (VAWTs) have been the subject of research and development for nearly a century. However, this turbine architecture has fallen in and out of favor on multiple occasions. Beginning in the late 1970s, the U.S. Department of Energy sponsored an extensive experimental program through Sandia National Laboratories which produced a mass of experimental data from several highly instrumented turbines. Turbines designed, built, and tested include the 2 meter, 5 meter, 17 meter, and 34 meter and their respective configurations. This program kicked off a commercial collaboration and resulted in the FloWind turbines. The FloWind turbines had several notable design changes from the experimental turbines that, in conjunction with a general lack of understanding regarding predicting fatigue at the time, led to the majority of the turbines failing prematurely during the late 80s.

This project is intended to support the development of new traction drive systems that meet the targets of 100 kW/L for power electronics and 50 kW/L for electric machines with reliable operation to 300,000 miles. To meet these goals, new designs must be identified that make use of state-of-the-art and next-generation electronic materials and design methods. Designs must exploit synergies between components, for example converters designed for high-frequency switching using wide band gap (WBG) devices and ceramic capacitors. This project included: (1) a survey of available technologies; (2) investigating new technologies, that for example, reduce volume of thermal management or magnetic components; (3) the development of computer aided design tools that consider the converter volume, reliability, and electrical performance; (4) exercising the design software to evaluate performance gaps and predict the impact of certain technologies and design approaches, i.e. GaN semiconductors, ceramic capacitors, ceramic thermal management components, and select topologies; (5) building and testing hardware prototypes to validate models and concepts. The design tools enable co-optimization of the power module and passive elements and provide some design guidance. At the end of the project, new advanced computing methods, such as machine learning approaches, were considered.