Publications Search

This paper discusses the penetration and coupling of a lightning return stroke through a hole in a metal barrier to a conductor located behind the hole. Indirect field coupling (electric and magnetic) and direct discharges are considered both analytically and experimentally. Although here we consider the hole to be preexisting, one application of this work is lightning return stroke coupling through holes burned in metallic barriers by the continuing current component of lightning. The goal is to develop an understanding of the mechanisms and expected penetrant levels in lightning burnthrough. © 2011 IEEE.

More Details

TYPE Journal Article YEAR 2012

OSTI Scopus

A locally conservative, discontinuous least-squares finite element method for the Stokes equations

International Journal for Numerical Methods in Fluids

Bochev, Pavel B.; Lai, James; Olson, Luke

Conventional least-squares finite element methods (LSFEMs) for incompressible flows conserve mass only approximately. For some problems, mass loss levels are large and result in unphysical solutions. In this paper we formulate a new, locally conservative LSFEM for the Stokes equations wherein a discrete velocity field is computed that is point-wise divergence free on each element. The central idea is to allow discontinuous velocity approximations and then to define the velocity field on each element using a local stream-function. The effect of the new LSFEM approach on improved local and global mass conservation is compared with a conventional LSFEM for the Stokes equations employing standard C 0 Lagrangian elements. © 2011 John Wiley & Sons, Ltd.

More Details

TYPE Conference YEAR 2012

Scopus OSTI

Pore-scale simulation of mixing-induced calcium carbonate precipitation and dissolution in a microfluidic pore network

Water Resources Research

Yoon, Hongkyu; Valocchi, Albert J.; Werth, Charles J.; Dewers, Thomas

We develop a 2-D pore scale model of coupled fluid flow, reactive transport, and calcium carbonate (CaCO 3) precipitation and dissolution. The model is used to simulate transient experimental results of CaCO 3 precipitation and dissolution under supersaturated conditions in a microfluidic pore network (i.e., micromodel) in order to improve understanding of coupled reactive transport systems perturbed by geological CO 2 injection. In the micromodel, precipitation is induced by transverse mixing along the centerline in pore bodies. The reactive transport model includes the impact of pH upon carbonate speciation and a CaCO 3 reaction rate constant, the effect of changing reactive surface area upon the reaction, and the impact of pore blockage from CaCO 3 precipitation on diffusion and flow. Overall, the pore scale model qualitatively captured the precipitate morphology, precipitation rate, and maximum precipitation area using parameter values from the literature. In particular, we found that proper estimation of the effective diffusion coefficient (D eff) and the reactive surface area is necessary to adequately simulate precipitation and dissolution rates. In order to match the initial phase of fast precipitation, it was necessary to consider the top and bottom of the micromodel as additional reactive surfaces. In order to match a later phase when dissolution occurred, it was necessary to increase the dissolution rate compared to the precipitation rate, but the simulated precipitate area was still higher than the experimental results after ∼30 min, highlighting the need for future study. The model presented here allows us to simulate and mechanistically evaluate precipitation and dissolution of CaCO 3 observed in a micromodel pore network. This study leads to improved understanding of the fundamental physicochemical processes of CaCO 3 precipitation and dissolution under far-from-equilibrium conditions. Copyright 2012 by the American Geophysical Union.

More Details

TYPE Conference YEAR 2012

Scopus OSTI

An automated electrochemical probe for evaluation of thin films

Journal of the Electrochemical Society

Small, Leo; Cook, Adam; Apblett, Christopher A.; Ihlefeld, Jon F.; Brennecka, Geoff; Duquette, David

An electrochemical probe station (EPS) for automated electrochemical testing of electronic-grade thin films is presented. Similar in design to a scanning droplet cell, this modular system features a flexible probe tip capable of contacting both metallic and oxide surfaces. Using the highly sensitive Pt-H 2SO 4 system, it is demonstrated that the EPS obtains results equivalent to those of a traditional electrochemical cell. Further, electrical testing of thin film PbZr 0.52Ti 0.48O 3 shows that this system may be used to ascertain fundamental electrical properties of dielectric films. © 2012 The Electrochemical Society.

More Details

TYPE Journal Article YEAR 2012

Scopus OSTI

Surface Photovoltage Measurements and Finite Element Modeling of SAW Devices

Donnelly, Christine

Over the course of a Summer 2011 internship with the MEMS department of Sandia National Laboratories, work was completed on two major projects. The first and main project of the summer involved taking surface photovoltage measurements for silicon samples, and using these measurements to determine surface recombination velocities and minority carrier diffusion lengths of the materials. The SPV method was used to fill gaps in the knowledge of material parameters that had not been determined successfully by other characterization methods. The second project involved creating a 2D finite element model of a surface acoustic wave device. A basic form of the model with the expected impedance response curve was completed, and the model is ready to be further developed for analysis of MEMS photonic resonator devices.

More Details

TYPE SAND Report YEAR 2012

DOI OSTI

Solar Energy Grid Integration Systems: Final Report of the Florida Solar Energy Center Team

Gonzalez, Sigifredo; Sena-Carian, Lisa D.; David, Caroline K.

Initiated in 2008, the Solar Energy Grid Integration Systems (SEGIS) program is a partnership involving the U.S. DOE, Sandia National Laboratories, private sector companies, electric utilities, and universities. Projects supported under the program have focused on the complete-system development of solar technologies, with the dual goal of expanding utility-scale penetration and addressing new challenges of connecting large-scale solar installations in higher penetrations to the electric grid. The Florida Solar Energy Center (FSEC), its partners, and Sandia National Laboratories have successfully collaborated to complete the work under the third and final stage of the SEGIS initiative. The SEGIS program was a three-year, three-stage project that include conceptual design and market analysis in Stage 1, prototype development and testing in Stage 2, and moving toward commercialization in Stage 3. Under this program, the FSEC SEGIS team developed a comprehensive vision that has guided technology development that sets one methodology for merging photovoltaic (PV) and smart-grid technologies. The FSEC team's objective in the SEGIS project is to remove barriers to large-scale general integration of PV and to enhance the value proposition of photovoltaic energy by enabling PV to act as much as possible as if it were at the very least equivalent to a conventional utility power plant. It was immediately apparent that the advanced power electronics of these advanced inverters will go far beyond conventional power plants, making high penetrations of PV not just acceptable, but desirable. This report summarizes a three-year effort to develop, validate and commercialize Grid-Smart Inverters for wider photovoltaic utilization, particularly in the utility sector.

More Details

TYPE SAND Report YEAR 2012

DOI OSTI

Characterization of hydraulic and ignition phenomena of pressurized water reactor fuel assemblies :

Durbin, S.; Lindgren, Eric

Abstract not provided.

More Details

TYPE SAND Report YEAR 2012

DOI OSTI

Systems Analysis of Past, Present, and Future Chemical Terrorism Scenarios

Miller, Trisha H.

Throughout history, as new chemical threats arose, strategies for the defense against chemical attacks have also evolved. As a part of an Early Career Laboratory Directed Research and Development project, a systems analysis of past, present, and future chemical terrorism scenarios was performed to understand how the chemical threats and attack strategies change over time. For the analysis, the difficulty in executing chemical attack was evaluated within a framework of three major scenario elements. First, historical examples of chemical terrorism were examined to determine how the use of chemical threats, versus other weapons, contributed to the successful execution of the attack. Using the same framework, the future of chemical terrorism was assessed with respect to the impact of globalization and new technologies. Finally, the efficacy of the current defenses against contemporary chemical terrorism was considered briefly. The results of this analysis justify the need for continued diligence in chemical defense.

More Details

TYPE SAND Report YEAR 2012

DOI OSTI

Publications

Search results