Publications

Results 13501–13600 of 99,299

Search results

Jump to search filters

Analyzing Custom Proof Masses and Quantum Limits of a Manufacturable Cavity Optical Levitation Solution

Grine, Alejandro J.; Serkland, Darwin K.; Schultz, Justin; Wood, Michael G.; Finnegan, Patrick S.; Weatherred, Scott E.; Peake, Gregory M.; Sandoval, Annette; Alliman, Darrel; Li, Tongcang; Seberson, Troy

This report details results of a one-year LDRD to understand the dynamics, figures of merit, and fabrication possibilities for levitating a micro-scale, disk-shaped dielectric in an optical field. Important metrics are the stability, positional uncertainty, and required optical power to maintain levitation. Much of the results are contained in a publication written by our academic alliance collaborators. Initial structures were grown at Sandia labs and a test fabrication flow was executed. Owing to our strength in VCSEL lasers, we were particularly interested in calculations and fabrication flows that could be compatible with a VCSEL light source.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Robustness and Validation of Model and Digital Twins Deployment

Volkova, Svitana; Stracuzzi, David J.; Shafer, Jenifer; Ray, Jaideep; Pullum, Laura

For digital twins (DTs) to become a central fixture in mission critical systems, a better understanding is required of potential modes of failure, quantification of uncertainty, and the ability to explain a model’s behavior. These aspects are particularly important as the performance of a digital twin will evolve during model development and deployment for real-world operations.

More Details
TYPE Other Report YEAR 2021
DOIOSTI

Export Administration Regulations (EAR) and Radiation Tolerant Microelectronics

Raby, Kaila

Sandia National Laboratories was asked to provide a technical feasibility assessment on whether programmability is a viable means to address the radiation levels in the Export Administration Regulations (EAR). Most (if not all) modern Complementary Metal Oxide Semiconductor (CMOS) technologies will exceed at least one of the EAR radiation criteria inherently, there is no longer anything “special” about domestic parts or technologies that exceed EAR radiation criteria. A modern part today is not “designed” to exceed EAR criteria and in fact a part would need to be “specially designed” to fail to meet all of these criteria. And although it is possible to design a part to fail to meet the EAR radiation criteria in an unprogrammed state, such a part would be difficult to design in some technologies, may not achieve the ultimate radiation levels desired, would fail to meet core reliability principles, and may be unsuitable for high consequence applications.

More Details
TYPE Other Report YEAR 2021
DOIOSTI

Critical steps in preventing future pandemics. Early lessons from the Covid-19 crisis for addressing natural and deliberate biological threats

Singh, Anup K.

This report summarizes a virtual workshop on early lessons from the COVID-19 pandemic as they pertain to proactively addressing future biological threats. Co-hosted by Sandia National Laboratory (Sandia) and the Council on Strategic Risks (CSR) in August 2020, the discussion involved experts who at that time were leading innovative efforts in various U.S. government agencies, industry, and academia sharing observations from their ongoing pandemic response efforts. Based on the input by these expert participants, it is clear that even though the pandemic response is ongoing, the following recommendations will be important to consider for more successfully addressing biological threats in the future: Continue building on the cross-sector collaboration and agility shown in the COVID-19 response; Expand capabilities for detecting biological threats early; Prioritize ways to create and disseminate medical countermeasures even faster; Create the U.S. bio industrial base needed for rapid response to biological threats, and keep it healthy; and, Major government reorganization may not be needed if there is effective work to form coalitions, improve coordination, and expand steady-state and surge capacities.

More Details
TYPE Other Report YEAR 2021
DOIOSTI

Review of Intrusion Detection Methods and Tools for Distributed Energy Resources

Lai, Christine; Chavez, Adrian R.; Jones, Christian B.; Jacobs, Nicholas J.; Hossain-McKenzie, Shamina S.; Johnson, Jay B.; Summers, Adam

Recent trends in the growth of distributed energy resources (DER) in the electric grid and newfound malware frameworks that target internet of things (IoT) devices is driving an urgent need for more reliable and effective methods for intrusion detection and prevention. Cybersecurity intrusion detection systems (IDSs) are responsible for detecting threats by monitoring and analyzing network data, which can originate either from networking equipment or end-devices. Creating intrusion detection systems for PV/DER networks is a challenging undertaking because of the diversity of the attack types and intermittency and variability in the data. Distinguishing malicious events from other sources of anomalies or system faults is particularly difficult. New approaches are needed that not only sense anomalies in the power system but also determine causational factors for the detected events. In this report, a range of IDS approaches were summarized along with their pros and cons. Using the review of IDS approaches and subsequent gap analysis for application to DER systems, a preliminary hybrid IDS approach to protect PV/DER communications is formed in the conclusion of this report to inform ongoing and future research regarding the cybersecurity and resilience enhancement of DER systems.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Thermal-Mechanical Elastic-Plastic and Ductile Failure Model Calibrations for 304L Stainless Steel Alloy

Corona, Edmundo; Kramer, S.L.B.; Lester, Brian T.; Jones, A.R.; Sanborn, Brett; Shand, Lyndsay; Fietek, Carter J.

Numerical simulations of metallic structures undergoing rapid loading into the plastic range require material models that accurately represent the response. In general, the material response can be seen as having four interrelated parts: the baseline response under slow loading, the effect of strain rate, the conversion of plastic work into heat and the effect of temperature. In essence, the material behaves in a thermal-mechanical manner if the loading is fast enough so when heat is generated by plastic deformation it raises the temperature and therefore influences the mechanical response. In these cases, appropriate models that can capture the aspects listed above are necessary. The material of interest here is 304L stainless steel, and the objective of this work is to calibrate thermal-mechanical models: one for the constitutive behavior and another for failure. The work was accomplished by first designing and conducting a material test program to provide data for the calibration of the models. The test program included uniaxial tension tests conducted at room temperature, 150 and 300 C and at strain rates between 10–4 and 103 1/s. It also included notched tension and shear-dominated compression hat tests specifically designed to calibrate the failure model. All test specimens were extracted from a single piece of plate to maintain consistency. The constitutive model adopted was a modular $J_2$ plasticity model with isotropic hardening that included rate and temperature dependence. A criterion for failure initiation based on a critical value of equivalent plastic strain fitted the failure data appropriately and was adopted. Possible ranges of the values of the parameters of the models were determined partially on historical data from calibrations of the same alloy from other lots and are given here. The calibration of the parameters of the models were based on finite element simulations of the various material tests using relatively ne meshes and hexahedral elements. When using the model in structural finite element calculations, however, element formulations and sizes different from those in the calibration are likely to be used. A brief investigation demonstrated that the failure initiation predictions can be particularly sensitive to the element selection and provided an initial guide to compensate for the effect of element size in a specific example.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Evaluation of the PhaseNet Model Applied to the IMS Seismic Network

Garcia, Jorge A.; Heck, Stephen L.; Young, Christopher J.; Brogan, Ronald

Producing a complete and accurate set of signal detections is essential for automatically building and characterizing seismic events of interest for nuclear explosion monitoring. Signal detection algorithms have been an area of research for decades, but still produce large quantities of false detections and misidentify real signals that must be detected to produce a complete global catalog of events of interest. Deep learning methods have shown promising capabilities in effectively characterizing seismic signals for complex tasks such as identifying phase arrival times. We use the PhaseNet model, a UNet-based Neural Network, trained on local distance data from northern California to predict seismic arrivals on data from the International Monitoring System (IMS) global network. We use an analyst-curated bulletin generated from this data set to compare the performance of PhaseNet to that of the Short-Term Average/Long-Term Average (STA/LTA) algorithm. We find that PhaseNet has the potential of outperforming traditional processing methods and recommend the training of a new model with the IMS data to achieve optimal performance.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI

Addendum to water resource assessment in the New Mexico Permian Basin

Reardon, Alexander J.; Lofton, Owen; Johnson, Patricia B.; Lowry, Thomas S.

There are an estimated 48,745 wells producing oil or gas in New Mexico as of August 8, 2020 and with advances in drilling and oil recovery technology the use of hydraulic fracturing has become more commonplace. With a typical well requiring 1.5 to 16 million gallons of water, there is an increased demand for water in the Permian Basin and concern over the regions ability to meet this demand. This report is an addendum to the 2018 report Water Resource Assessment in the New Mexico Permian Basin (SAND2018-12018) to monitor baseline water level and chemistry data established in the original report. Results from this addendum can be used to further understand regional water supply and demands and aid in the BLMs mission of sustainably meeting the needs of water users while protecting human and environmental health.

More Details
TYPE SAND Report YEAR 2021
DOIOSTI
Results 13501–13600 of 99,299
Results 13501–13600 of 99,299