Publications

A high temperature spectral gamma tool has been designed and built for use in small-diameter geothermal exploration wells. Several engineering judgments are discussed regarding operating parameters, well model selection, and signal processing. An actual well log at elevated temperatures is given with spectral gamma reading showing repeatability.

A new downhole sampling tool has been built for use in steam wells at The Geysers geothermal reservoir. The tool condenses specimens into an initially evacuated vessel that is opened down hole at the direction of an on-board computer. The tool makes a temperature log of the well as it is deployed, and the pressure and temperature of collected specimens are monitored for diagnostic purposes. Initial tests were encouraging, and the Department of Energy has funded an expanded effort that includes data gathering needed to develop a three-dimensional model of The Geysers geochemical environment. Collected data will be useful for understanding the origins of hydrogen chloride and non-condensable gases in the steam, as well as tracking the effect of injection on the composition of produced steam. Interested parties are invited to observe the work and to join the program.

This is a general overview of what Sandia National Laboratories` Renewable Energy Office is

Structural dynamic testing is concerned with the estimation of system properties, including frequency response functions and modal characteristics. These properties are derived from tests on the structure of interest, during which excitations and responses are measured and Fourier techniques are used to reduce the data. The inputs used in a test are frequently random, and they excite random responses in the structure of interest When these random inputs and responses are analyzed they yield estimates of system properties that are random variable and random process realizations. Of course, such estimates of system properties vary randomly from one test to another, but even when deterministic inputs are used to excite a structure, the estimated properties vary from test to test. When test excitations and responses are normally distributed, classical techniques permit us to statistically analyze inputs, responses, and some system parameters. However, when the input excitations are non-normal, the system is nonlinear, and/or the property of interest is anything but the simplest, the classical analyses break down. The bootstrap is a technique for the statistical analysis of data that are not necessarily normally distributed. It can be used to statistically analyze any measure of input excitation or response, or any system property, when data are available to make an estimate. It is designed to estimate the standard error, bias, and confidence intervals of parameter estimates. This paper shows how the bootstrap can be applied to the statistical analysis of modal parameters.

A high-frequency multibounce radar scattering code was used as a simulation platform for demonstrating an algorithm to compute the ARC of specific radar targets. To illustrate this simulation process, several targets models were used. Simulation results for a sphere model were used to determine the errors of approximation associated with the simulation; verifying the process. The severity of glint induced tracking errors was also illustrated using a model of an F-15 aircraft. It was shown, in a deterministic manner, that the ARC of a target can fall well outside its physical extent. Finally, the apparent radar centroid simulation based on a ray casting procedure is well suited for use on most massively parallel computing platforms and could lead to the development of a near real-time radar tracking simulation for applications such as endgame fuzing, survivability, and vulnerability analyses using specific radar targets and fuze algorithms.

An acousto-ultrasonic inspection technique was developed to evaluate the structural integrity of the epoxy bond interface between a metal insert and the fiber glass epoxy composite of a wind turbine blade. Data was generated manually as well as with a PC based data acquisition and display system. C-scan imaging using a portable ultrasonic scanning system provided an area mapping of the delamination or disbond due to fatigue testing and normal field operation conditions of the turbine blade. Comparison of the inspection data with a destructive visual examination of the bond interface to determine the extent of the disbond showed good agreement between the acousto-ultrasonic inspection data and the visual data.

Sandia National Laboratories is developing a technology called Laser Engineered Net Shaping{trademark} (LENS{trademark}). This process allows complex 3-dimensional solid metallic objects to be directly fabricated for a CAD solid model. Experiments performed demonstrate that complex alloys such as Inconel{trademark} 625 and ANSI stainless steel alloy 316 can be used in the LENS{trademark} process to produce solid metallic-shapes. In fact, the fabricated structures exhibit grain growth across the deposition layer boundaries. Mechanical testing data of deposited 316 stainless steel material indicates that the deposited material strength and elongation are greater than that reported for annealed 316 stainless steel. Electron microprobe analysis of the deposited Inconel{trademark} 625 material shows no compositional degradation of the 625 alloy and that 100% dense structures can be obtained using this technique. High speed imaging used to acquire process data during experimentation shows that the powder particle size range can significantly affect the stability, and subsequently, the performance of the powder deposition process. Finally, dimensional studies suggest that dimensional accuracy to {+-} 0.002 inches (in the horizontal direction) can be maintained.

Inverse protein folding concerns the identification of an amino acid sequence that folds to a given structure. Sequence design problems attempt to avoid the apparent difficulty of inverse protein folding by defining an energy that can be minimized to find protein-like sequences. The authors evaluate the practical relevance of two sequence design problems by analyzing their computation complexity. They show that the canonical method of sequence design is intractable, and describe approximation algorithms for this problem. The authors also describe an efficient algorithm that exactly solves the grand canonical method. The analysis shows how sequence design problems can fail to reduce the difficulty of the inverse protein folding problem, and highlights the need to analyze these problems to evaluate their practical relevance.

Stress in thin films plays a critical role in many technologically important areas. The role is a beneficial one in strained layer superlattices where semiconductor electrical and optical properties can be tailored with film stress. On the negative side, residual stress in thin-film interconnects in microelectronics can lead to cracking and delamination. In spite of their importance, however, surface and thin-film stresses are difficult to measure and control, especially on a local level. In recent studies, we used the Interfacial Force Microscope (IFM) in a nanoindenter mode to survey the nanomechanical properties of Au films grown on various substrates. Quantitative tabulations of the indentation modulus and the maximum shear stress at the plastic threshold showed consistent values over individual samples but a wide variation from substrate to substrate. These values were compared with film properties such as surface roughness, average grain size and interfacial adhesion and no correlation was found. However, in a subsequent analysis of the results, we found consistencies which support the integrity of the data and point to the fact that the results are sensitive to some property of the various film/substrate combinations. In recent measurements on two of the original substrate materials we found a direct correlation between the nanomechanical values and the residual stress in the films, as measured globally by a wafer warping technique. In the present paper, we review these earlier results and show recent measurements dealing with stresses externally applied to the films which supports our earlier conclusion concerning the role of stress on our measurements. In addition, we present very recent results concerning morphological effects on nanomechanical properties which add additional support to the suggestion that near-threshold indentation holds promise of being able to measure stress on a very local level.

In this work we show that annealing of silicon/silicon-dioxide/silicon structures in forming gas (N{sub 2}:H{sub 2}; 95:5) above 500{degrees}C leads to spontaneous incorporation of mobile H{sup +} ions in the buried SiO{sub 2} layer. We demonstrate that, unlike the alkali ions feared as killer contaminants in the early days, the space charge distribution of these mobile protons within the buried oxide layer can be very well controlled and easily rearranged with relatively high speed at room temperature. The hysteresis in the flat band voltage shift provides a unique vehicle to study proton kinetics in silicon dioxide thin films. It is further shown how this effect can be used as the basis for a reliable nonvolatile FET memory device that has potential to be competitive with state-of-the-art Si-based memory technologies. The power of this novel device is its simplicity; it requires few processing steps, all of which are standard in Si integrated-circuit fabrication.

Three important oxidation regimes have been identified in the temporal evolution of the wet thermal oxidation of Al{sub x}Ga{sub 1-x}As (1 {ge} x {ge} 0.90) on GaAs: (1) oxidation of Al and Ga in the Al{sub x}Ga{sub 1-x}As alloy to form an amorphous oxide layer, (2) oxidative formation and elimination of elemental As (both crystalline and amorphous) and of amorphous As{sub 2}O{sub 3}, and (3) crystallization of the oxide film. Residual As can result in up to a 100-fold increase in leakage current and a 30% increase in the dielectric constant and produce strong Fermi-level pinning and high leakage currents at the oxidized Al{sub x}Ga{sub 1-x}As/GaAs interface. The presence of thermodynamically-favored interfacial As may impose a fundamental limitation on the application of AlGaAs wet oxidation for achieving MIS devices in the GaAs material system.

Ab initio Hartree-Fock and second-order Moeller-Plesset theory calculations have been performed to investigate the stability of triply-coordinated O{sup +} centers in the Si-O-Si network of amorphous SiO{sub 2}. The calculations reveal that the H{sup +} ion binds with a bridging O center to form a very stable (D{sub e} > 6 eV) trivalent O complex. Capture of an electron by the positively charged protonated complex, however, is predicted to immediately lead to the dissociation of the O-H bond. A relatively weaker, but stable bond is also formed between the bridging O atom and a {sup +}SiH{sub 3} ion.

Fission foils are commonly used as dosimetry sensors. They play a very important role in neutron spectrum determinations. This paper provides a combination of experimental measurements and calculations to quantify the importance and synergy of several factors that affect the fission response of a dosimeter. Only when these effects are properly treated can fission dosimeters be used with sufficient fidelity.

The Waste Isolation Pilot Plant (WIPP) is a repository for transuranic wastes constructed in bedded Permian-age halite in the Delaware Basin, a sedimentary basin in southeastern New Mexico, USA. A drilling scenario has been identified during performance assessment (PA) that could lead to the release of radionuclides to the Culebra Dolomite Member of the Rustler Formation, the most transmissive water-saturated unit above the repository horizon. Were this to occur, the radionuclides would need to be largely contained within the Culebra (or neighboring strata) within the WIPP-site boundary through the period lasting for 10,000 years after repository closure for WIPP to remain in compliance with applicable regulations on allowable releases. Thus, processes affecting transport of radionuclides within the Culebra are of importance to PA.

A discrete element computer program named DMC{_}BLAST (Distinct Motion Code) has been under development since 1987 for modeling rock blasting. This program employs explicit time integration and uses spherical or cylindrical elements that are represented as circles in 2-D. DMC{_}BLAST calculations compare favorably with data from actual bench blasts. The blast modeling capabilities of DMC{_}BLAST have been expanded to include independently dipping geologic layers, top surface, bottom surface and pit floor. The pit can also now be defined using coordinates based on the toe of the bench. A method for modeling decked explosives has been developed which allows accurate treatment of the inert materials (stemming) in the explosive column and approximate treatment of different explosives in the same blasthole. A DMC{_}BLAST user can specify decking through a specific geologic layer with either inert material or a different explosive. Another new feature of DMC{_}BLAST is specification of an uplift angle which is the angle between the normal to the blasthole and a vector defining the direction of explosive loading on particles adjacent to the blasthole. A buffer (choke) blast capability has been added for situations where previously blasted material is adjacent to the free face of the bench preventing any significant lateral motion during the blast.

Vertical-axis wind turbine technology is not well understood, even though the earliest wind machines rotated about a vertical axis. The operating environment of a vertical-axis wind turbine is quite complex, but detailed analysis capabilities have been developed and verified over the last 30 years. Although vertical-axis technology has not been widely commercialized, it exhibits both advantages and disadvantages compared to horizontal-axis technology, and in some applications, it appears to offer significant advantages.

This study presents a combined analytical and experimental effort to characterize and improve the ride quality of the Department of Energy tractor/trailer combination. The focus is to augment the experimental test results with the use of a high quality computer model. The discussion includes an overview of the finite element model of the vehicle and experimental modal test results. System identification techniques are employed to update the mathematical model. The validated model is then used to illustrate the benefits of incorporating two major design changes, namely the switch from a separate cab/sleeper configuration to an integrated cab, and the use of a cab suspension system.

Crime prevention is on the minds of most people today. The concern for public safety and the theft of valuable assets are being discussed at all levels of government and throughout the public sector. There is a growing demand for security systems that can adequately safeguard people and valuable assets against the sophistication of those criminals or adversaries who pose a threat. The crime in this country has been estimated at $70 billion in direct costs and up to $300 billion in indirect costs. Health insurance fraud alone is estimated to cost American businesses $100 billion. Theft, warranty fraud, and counterfeiting of computer hardware totaled $3 billion in 1994. A threat analysis is a prerequisite to any security system design to assess the vulnerabilities with respect to the anticipated threat. Having established a comprehensive definition of the threat, crime prevention, detection, and threat assessment technologies can be used to address these criminal activities. This talk will outline the process used to design a security system regardless of the level of security. This methodology has been applied to many applications including: government high security facilities; residential and commercial intrusion detection and assessment; anti-counterfeiting/fraud detection technologies (counterfeit currency, cellular phone billing, credit card fraud, health care fraud, passport, green cards, and questionable documents); industrial espionage detection and prevention (intellectual property, computer chips, etc.); and security barrier technology (creation of delay such as gates, vaults, etc.).

There are many technologies emerging from this decade that can be used to help the law enforcement community protect the public as well as public and private facilities against ever increasing threats to this country and its resources. These technologies include sensors, closed circuit television (CCTV), access control, contraband detection, communications, control and display, barriers, and various component and system modeling techniques. This paper will introduce some of the various technologies that have been examined for the Department of Energy that could be applied to various law enforcement applications. They include: (1) scannerless laser radar; (2) next generation security systems; (3) response force video information helmet system; (4) access delay technologies; (5) rapidly deployable intrusion detection systems; and (6) cost risk benefit analysis.

The benefits of a collocated sensor actuator pair are well known within the controls community. Generally speaking, collocation offers the use of simple control algorithms with reduced instabilities due to spillover. One method for achieving collocation is the implementation of a ``sentuator`` in which a piezoelectric element functions simultaneously as both a sensor and an actuator. Past work in utilizing a sentuator has primarily been limited to piezoelectric films and patches mounted to flexible structures. Additional papers have provided information and methodology for dealing with the non-linear aspects of a piezoceramic sentuator. The need arises for methods of self-sensing when performing active vibration control of very stiff structures. A method for understanding and using self-sensing lead zirconate titanate stacks for active vibration control is presented. This paper specifically provides a basic understanding of self-sensing methods as applied to stiff structures for the purposes of control. The discussion of the methodology is followed by a simple example in which active vibration control is applied to a model of a boring bar with embedded PZT stacks.

It is common practice in structural dynamics to develop mathematical models for system behavior, and the authors are now capable of developing stochastic models, i.e., models whose parameters are random variables. Such models have random characteristics that are meant to simulate the randomness in characteristics of experimentally observed systems. This paper suggests a formal statistical procedure for the validation of mathematical models of stochastic systems when data taken during operation of the stochastic system are available. The statistical characteristics of the experimental system are obtained using the bootstrap, a technique for the statistical analysis of non-Gaussian data. The authors propose a procedure to determine whether or not a mathematical model is an acceptable model of a stochastic system with regard to user-specified measures of system behavior. A numerical example is presented to demonstrate the application of the technique.

Ion implantation doping and isolation is expected to play an enabling role for the realization of advanced III-Nitride based devices. In fact, implantation has already been used to demonstrate n- and p-type doping of GaN with Si and Mg or Ca, respectively, as well as to fabricate the first GaN junction field effect transistor. Although these initial implantation studies demonstrated the feasibility of this technique for the III-Nitride materials, further work is needed to realize its full potential. After reviewing some of the initial studies in this field, the authors present new results for improved annealing sequences and defect studies in GaN. First, sputtered AlN is shown by electrical characterization of Schottky and Ohmic contacts to be an effect encapsulant of GaN during the 1,100 C implant activation anneal. The AlN suppresses N-loss from the GaN surface and the formation of a degenerate n{sup +}-surface region that would prohibit Schottky barrier formation after the implant activation anneal. Second, they examine the nature of the defect generation and annealing sequence following implantation using both Rutherford Backscattering (RBS) and Hall characterization. They show that for a Si-dose of 1 x 10{sup 16} cm{sup {minus}2} 50% electrical donor activation is achieved despite a significant amount of residual implantation-induced damage in the material.

Planarization techniques such as chemical-mechanical polishing (CMP) have emerged as enabling technologies for the manufacturing of multi- level metal interconnects used in high-density Integrated Circuits (IC). An overview of general planarization techniques for MicroElectroMechanical Systems (MEMS) and, in particular, the extension of CMP from sub-micron IC manufacturing to the fabrication of complex surface-micromachined MEMS will be presented. Planarization technique alleviates processing problems associated with fabrication of multi-level polysilicon structures, eliminates design constraints linked with non-planar topography, and provides an avenue for integrating different process technologies. The CMP process and present examples of the use of CMP in fabricating MEMS devices such as microengines, pressure sensors, and proof masses for accelerometers along with its use for monolithically integrating MEMS devices with microelectronics are presented.

This paper presents several applications of virtual reality relevant to the areas of nuclear safeguards and non-proliferation. Each of these applications was developed to the prototype stage at Sandia National Laboratories` Virtual Reality and Intelligent Simulation laboratory. These applications include the use of virtual reality for facility visualization, training of inspection personnel, and security and monitoring of nuclear facilities.

Mathematical models of physical systems are used, among other purposes, to improve our understanding of the behavior of physical systems, predict physical system response, and control the responses of systems. Phenomenological models are frequently used to simulate system behavior, but an alternative is available - the artificial neural network (ANN). The ANN is an inductive, or data-based model for the simulation of input/output mappings. The ANN can be used in numerous frameworks to simulate physical system behavior. ANNs require training data to learn patterns of input/output behavior, and once trained, they can be used to simulate system behavior within the space where they were trained.They do this by interpolating specified inputs among the training inputs to yield outputs that are interpolations of =Ming outputs. The reason for using ANNs for the simulation of system response is that they provide accurate approximations of system behavior and are typically much more efficient than phenomenological models. This efficiency is very important in situations where multiple response computations are required, as in, for example, Monte Carlo analysis of probabilistic system response. This paper describes two frameworks in which we have used ANNs to good advantage in the approximate simulation of the behavior of physical system response. These frameworks are the non-recurrent and recurrent frameworks. It is assumed in these applications that physical experiments have been performed to obtain data characterizing the behavior of a system, or that an accurate finite element model has been run to establish system response. The paper provides brief discussions on the operation of ANNs, the operation of two different types of mechanical systems, and approaches to the solution of some special problems that occur in connection with ANN simulation of physical system response. Numerical examples are presented to demonstrate system simulation with ANNs.

This paper summarizes a virtual reality universe application in which a user can travel between four virtual worlds through the use of haptic buttons. Each of the worlds demonstrates different aspects of haptic rendering which together create a wide base for force feedback effects. Specifics of the rendering algorithms will be discussed along with possible uses and modifications for other real-life applications.

This paper summarizes the U.S. Department of Energy R&D program in crystalline-silicon photovoltaic technology, which is jointly managed by Sandia National Laboratories and National Renewable Energy Laboratory. This program features a balance of basic an d applied R&D, and of university, industry, and national laboratory R&D. The goal of the crystalline-silicon R&D program is to accelerate the commercial growth of crystalline-silicon photovoltaic technology, and four strategic objectives were identified to address this program goal. Technical progress towards meeting these objectives is reviewed.

The automatic evaluation of graphical user interfaces can help reduce development costs in the creation of new designs or modification of existing designs. Several standards for the X Window System have been proposed or implemented that could greatly reduce the time spent evaluating GUIs. We implemented a User Interface Testbed (UseIT) based on the proposed Remote Access Protocol (RAP) standard. UseIT was created to automatically record an end user`s interaction with a Motif GUI application without modification or re-linking of existing code. The recorded interaction could then be replayed or displayed visually for interpretation by a human factors specialist. The end goal was to recreate the GUI and automatically recommend design changes based upon the interactions.

This paper provides new test methods and analytical procedures for characterizing the electrical performance of photovoltaic modules and arrays. The methods use outdoor measurements to provide performance parameters both at standard reporting conditions and for all operating conditions encountered by typical photovoltaic systems. Improvements over previously used test methods are identified, and examples of the successful application of the methodology are provided for crystalline- and amorphous-silicon modules and arrays. This work provides an improved understanding of module and array performance characteristics, and perhaps most importantly, a straight- forward yet rigorous model for predicting array performance at all operating conditions. For the first time, the influences of solar irradiance, operating temperature, solar spectrum, solar angle-of- incidence, and temperature coefficients are all addressed in a practical way that will benefit both designers and users of photovoltaics.

There has been little systematic study of the cause of dead (inactive) layers in II-VI phosphors used in thin film electroluminescent devices. This paper discusses preparation and characterization of rf sputter deposited Eu-doped Sr sulfide (SrS:Eu) thin films for use in a study to determine the cause of the dead layer. (The dead layer`s behavior is likely influenced by thin film composition, crystallinity, and microstructure.) We have deposited SrS:Eu thin films in a repeatable, consistent manner and have characterized properties such as composition, crystallinity, and microstructure as well as photoluminescent (PL) and electroluminescent behavior. The composition was determined using Rutherford backscattering spectrometry and electron microprobe analysis. XRD was used to assess crystalline orientation and grain size, SEM to image thin film microstructure. Measuring the PL decay after subnanosecond laser excitation in the lowest absorption band of the dopant allowed direct measurement of the dopant luminescence efficiency.

To ensure high levels of deterrent capability in the 21st century, new stockpile stewardship principles are being embraced at Sandia National Laboratories. The Department of Energy Accelerated Strategic Computing Initiative (ASCI) program is providing the computational capacity and capability as well as funding the system and simulation software infrastructure necessary to provide accurate, precise and predictive modeling of important components and devices. An important class of components require modeling of piezoelectric and ferroceramic materials. The capability to run highly resolved simulations of these types of components on the ASCI parallel computers is being developed at Sandia in the ElectroMechanical Modeling in Alegra (EMMA) code. This a simulation capability being developed at Sandia National Laboratories for high-fidelity modeling of electromechanical devices. these devices can produce electrical current arising from material changes due to shock impact or explosive detonation.

This paper discusses Sandia National Laboratories` development of new technologies for use in the Vietnam War - specifically the seismic sensors deployed to detect troop and vehicle movement - first along the Ho Chi Minh Trail and later in perimeter defense for American military encampments in South Vietnam. Although the sensor story is a small one, it is interesting because it dovetails nicely with our understanding of the war in Vietnam and its frustrations; of the creation of new technologies for war and American enthusiasm for that technology; and of a technological military and the organizational research and a m am development structure created to support it. Within the defense establishment, the sensors were proposed within the context of a larger concept - that of a barrier to prevent the infiltration of troops and supplies from North Vietnam to the South. All of the discussion of the best way to fight in Vietnam is couched in the perception that this was a different kind of war than America was used to fighting. The emphasis was on countering the problems posed by guerrilla/revolutionary warfare and eventually by the apparent constraints of being involved in a military action, not an outright war. The American response was to find the right technology to do the job - to control the war by applying a technological tincture to its wounds and to make the war familiar and fightable on American terms. And, when doubts were raised about the effectiveness of applying existing technologies (namely, the bombing of North Vietnam and Laos), the doubters turned to new technologies. The sensors that were developed for use in Vietnam were a direct product of this sort of thinking - on the part of the engineers at Sandia who created the sensors, the civilian scientific advisors who recommended them, and, ultimately, the soldiers in the field who had to use them.

For the past few years, the Minnesota Department of Corrections, assisted by Sandia National Laboratories, has developed a set of standards for perimeter security at medium, close, and maximum custody correctional facilities in the state. During this process, the threat to perimeter security was examined and concepts about correctional perimeter security were developed. This presentation and paper will review the outcomes of this effort, some of the lessons learned, and the concepts developed during this process and in the course of working with architects, engineers and construction firms as the state upgraded perimeter security at some facilities and planned new construction at other facilities.

Though the theme of System Engineering is integration, and it is normal to attempt in integration to ignore the lines between disciplines, there are distinct characteristics of the mechanical design portion of any major system design project that make this difficult. How these characteristics compound the difficulty of integration is discussed and means to minimize the associated obstacles are suggested.

One major thrust in FAA`s National Aging Aircraft Research Program is to foster new technologies in civil aircraft maintenance. Recent DOD and other government developments in using bonded composite doublers on metal structures support the need for validation of such doubler applications on US certificated airplanes. In this study, a specific composite application was chosen on an L-1011 aircraft. Primary inspection requirements for these doublers include identifying disbonds between composite laminate and aluminum parent material, and delaminations in the composite laminate. Surveillance of cracks or corrosion in the parent aluminum material beneath the double is also a concern. No single NDI method can inspect for every flaw type, therefore we need to know NDI capabilities and limitations. This paper reports on a series of NDI tests conducted on laboratory test structures and on a fuselage section from a retired L-1011. Application of ultrasonics, x-ray, and eddy current to composite doublers and results from test specimens loaded to provide a changing flaw profile, are presented in this paper. Development of appropriate inspection calibration standards are also discussed.

This paper documents the history of photovoltaic use within the Department of Defense leading up to the installation of 2.1 MW of photovoltaics underway today. This history describes the evolution of the Department of Defense`s Tri-Service Photovoltaic Review Committee and the committee`s strategic plan to realize photovoltaic`s fall potential through outreach, conditioning of the federal procurement system, and specific project development. The Photovoltaic Review Committee estimates photovoltaic`s potential at nearly 4,000 MW, of which about 700 MW are considered to be cost-effective at today`s prices. The paper describes photovoltaic`s potential within the Department of Defense, the status and features of the 2.1 MW worth of photovoltaic systems under installation, and how these systems are selected and implemented. The paper also documents support provided to the Department of Defense by the Department of Energy dating back to the late 70s.

High heat flux testing for the United States fusion power program is the primary mission of the Plasma Materials Test Facility (PMTF) located at Sandia National Laboratories in Albuquerque, New Mexico. This facility, an official Department of Energy User Facility, has been in operation for over 15 years and has provided much of the high heat flux data used in the design and evaluation of plasma facing components for many of the world`s magnetic fusion tokamak experiments. In addition to domestic tokamaks such as Tokamak Fusion Test Reactor (TFTR) at Princeton, the DIII-D tokamak pt General Atomics, and Alcator C-Mod at MIT, components for international experiments like TEXTOR, Tore-Supra, and JET also have been tested at the PMTF. High heat flux testing spans a wide spectrum including thermal shock tests on passively cooled materials, thermal response and thermal fatigue tests on actively cooled components, critical heat flux burnout tests, braze reliability tests, and safety related tests. The program`s main focus now is on testing of beryllium and tungsten armor tiles bonded to divertor, limiter, and first wall components for the International Thermonuclear Experimental Reactor (ITER). The ITER project is a collaboration among the US, EU, RF, and Japanese fusion programs. This article provides a brief overview of the high heat flux testing capabilities at the PMTF, and describes some recent test results.

Sandia National Labs (SNL) in 1994 completed a project funded by the National Institute of Justice (NIJ) to determine the applicability of sticky foam for correctional applications. Sticky foam is an extremely tacky, tenacious material used to block, entangle, and impair individuals. The NIJ project developed a gun capable of firing multiple shots of sticky foam, tested the gun and sticky foam effectiveness on SNL volunteers acting out prison and law enforcement scenarios, and had the gun and sticky foam evaluated by correctional representatives. Based on the NIJ project work, SNL supported the Marine Corps Mission, Operation United Shield, with sticky foam guns and supporting equipment to assist in the withdrawal of UN Peacekeepers from Somalia. Prior to the loan of the equipment, the Marines were given training in sticky foam characterization, toxicology, safety issues, cleanup and waste disposal, use limitations, use protocol and precautions, emergency facial clean-up, skin cleanup, gun filling, targeting and firing, and gun cleaning. The Marine Corps successfully used the sticky foam guns as part of that operation. This paper describes these recent developments of sticky foam for non-lethal uses and some of the lessons learned from scenario and application testing.

This paper provides perspectives gained from reviewing 75 Individual Plant Examination (IPE) submittals covering 108 nuclear power plant units. Variability both within and among reactor types is examined to provide perspectives regarding plant-specific design and operational features, and C, modeling assumptions that play a significant role in the estimates of core damage frequencies in the IPEs. Human actions found to be important in boiling water reactors (BWRs) and in pressurized water reactors (PWRs) are presented and the events most frequently found important are discussed.

As part of an ongoing investigation to characterize the properties and structure of Zn halide-Te oxide glasses, we report preliminary measurements of the optical properties of several Nd- and Er-doped tellurites. Measurements include fluorescence lifetimes and estimates of the theoretical radiative lifetimes (from traditional Judd-Ofelt analysis of optical absorption spectra) as well as phonon sideband studies sensitive to vibrational characteristics near the rare earth ion. Response of these optical features to the substitution of alternative halides is examined.

Algorithms for computing forces and associated surface deformations (graphical and physical) are given, which, together with a force feedback device can be used to haptically display virtual objects. The Bendable Polygon algorithm, created at Sandia National Labs and the University of New Mexico, for visual rendering of computer generated surfaces is also presented. An implementation using the EIGEN virtual reality environment, and the PHANToM (Trademark) haptic interface, is reported together with suggestions for future research.

We are developing a prototype zooming World-Wide Web browser within Pad++, a multiscale graphical environment. Instead of having a single page visible at a time, multiple pages and the links between them are depicted on a large zoomable information surface. Pages are scaled so that the page in focus is clearly readable with connected pages shown at smaller scales to provide context. We quantitatively compared performance with the Pad++ Web browser and Netscape in several different scenarios. We examined how quickly users could answer questions about a specific Web site designed for this test. Initially we found that subjects answered questions slightly slower with Pad++ than with Netscape. After analyzing the results of this study, we implemented several changes to the Pad++ Web browser, and repeated one Pad++ condition. After improvements were made to the Pad++ browser, subjects using Pad++ answered questions 23% faster than those using Netscape.

The popularization of the Internet has brought fundamental changes to the world, because it allows a universal method of communication between computers. This carries enormous benefits with it, but also raises many security considerations. Cryptography is a fundamental technology used to provide security of computer networks, and there is currently a widespread engineering effort to incorporate cryptography into various aspects of the Internet. The system-level engineering required to provide security services for the Internet carries some important lessons for researchers whose study is focused on narrowly defined problems. It also offers challenges to the cryptographic research community by raising new questions not adequately addressed by the existing body of knowledge. This paper attempts to summarize some of these lessons and challenges for the cryptographic research community.

Vertical-cavity surface-emitting lasers (VCSELs) are presently the subject of intense research due to their potential as compact, efficient, astigmatic laser sources for a number of important applications. Of special interest are the selectively-oxidized VCSELs that have recently set records for threshold current and wall-plug efficiency. The onset of higher-order modes at powers of a few milliWatts, however, presently limits the wide utilization of these devices and indicates the need for improvements in design. Unfortunately, their complexity precludes optimization based solely upon empirical methods, and points instead to the need for better numerical models. Modeling the optical field in a vertical-cavity laser, however, is especially difficult due to both the high Q of the optical cavity and the distributed reflectivity of the mirrors. Our approach to this dilemma has been the development of modeling techniques on two complexity scales. We first derived an effective- index model that is numerically efficient and thus can be included together with carrier transport and thermal models to make up a self-consistent modeling package. In addition to its use in the overall VCSEL model, this simplified optical model has been extremely valuable in elucidating the basic principles of waveguiding in VCSELs that in turn have led to new ideas in device design. More specifically, the derived expression for the effective index shows clearly that index guiding in a VCSEL depends only on variations in optical cavity length, and thus can be engineered without the need to alter the material index of refraction. Also, we have designed index- guided and antiguided devices whose cavity lengths are modified in certain regions by etching of the cavity material prior to growth of the second mirror. Fabrication of these new device designs is presently in progress.

A series of ``MiniLab`` end effectors are currently being designed for robotic deployment in hazardous areas such as waste storage tanks at Idaho National Engineering Laboratories (INEL) and Oak Ridge National Laboratory (ORNL). These MiniLabs will be the first ever multichannel hazardous waste characterization end effectors deployed in underground high level waste storage tanks. They consist of a suite of chemical, radiological, and physical properties sensors integrated into a compact package mounted on the end of a robotic arm and/or vehicle. Most of the sensors are commercially available thus reducing the overall cost of design and maintenance. Sensor configurations can be customized depending on site/customer needs. This paper will address issues regarding the cost of field sampling verses MiniLab in-situ measurements and a brief background of the Light Duty utility Arm (LDUA) program. Topics receiving in depth attention will include package size parameters/constraints, design specifications, and investigations of currently available sensor technology. Sensors include radiological, gas, chemical, electrolytic, visual, temperature, and ranging. The effects of radiation on the life of the systems/sensors will also be discussed. Signal processing, control, display, and data acquisition methods will be described. The paper will conclude with an examination of possible applications for MiniLabs.

For the past seven years, Sandia National Laboratories has been active in the development of robotic systems to help remediate DOE`s waste sites and decommissioned facilities. Some of these facilities have high levels of radioactivity which prevent manual clean-up. Tele-operated and autonomous robotic systems have been envisioned as the only suitable means of removing the radioactive elements. World modeling is defined as the process of creating a numerical geometric model of a real world environment or workspace. This model is often used in robotics to plan robot motions which perform a task while avoiding obstacles. In many applications where the world model does not exist ahead of time, structured lighting, laser range finders, and even acoustical sensors have been used to create three dimensional maps of the environment. These maps consist of thousands of range points which are difficult to handle and interpret. This paper presents a least squares technique for fitting range data to planar and quadric surfaces, including cylinders and ellipsoids. Once fit to these primitive surfaces, the amount of data associated with a surface is greatly reduced up to three orders of magnitude, thus allowing for more rapid handling and analysis of world data.

Sandia National Laboratories (SNL) has recently developed a 16 cm{sup 3} (1 in{sup 3}) autonomous robotic vehicle which is capable of tracking a single conducting wire carrying a 96 kHz signal. This vehicle was developed to assess the limiting factors in using commercial technology to build miniature autonomous vehicles. Particular attention was paid to the design of the control system to search out the wire, track it, and recover if the wire was lost. This paper describes the test vehicle and the control analysis. Presented in the paper are the vehicle model, control laws, a stability analysis, simulation studies and experimental results.

With the goal of improving the ability of people around the world to share the development and use of intelligent systems, Sandia National Laboratories` Intelligent Systems and Robotics Center is developing new Virtual Collaborative Engineering (VCE) and Virtual Collaborative Control (VCC) technologies. A key area of VCE and VCC research is in shared visualization of virtual environments. This paper describes a Virtual Collaborative Visualizer (VCV), named Rocinante, that Sandia developed for VCE and VCC applications. Rocinante allows multiple participants to simultaneously view dynamic geometrically-defined environments. Each viewer can exclude extraneous detail or include additional information in the scene as desired. Shared information can be saved and later replayed in a stand-alone mode. Rocinante automatically scales visualization requirements with computer system capabilities. Models with 30,000 polygons and 4 Megabytes of texture display at 12 to 15 frames per second (fps) on an SGI Onyx and at 3 to 8 fps (without texture) on Indigo 2 Extreme computers. In its networked mode, Rocinante synchronizes its local geometric model with remote simulators and sensory systems by monitoring data transmitted through UDP packets. Rocinante`s scalability and performance make it an ideal VCC tool. Users throughout the country can monitor robot motions and the thinking behind their motion planners and simulators.

A capacitive sensing technology has been applied to develop a Standoff Sensor System for control of robotically deployed tools utilized in Decontamination and Dismantlement (D and D) activities. The system combines four individual sensor elements to provide non-contact, multiple degree-of-freedom control of tools at distances up to five inches from a surface. The Standoff Sensor has been successfully integrated to a metal cutting router and a pyrometer, and utilized for real-time control of each of these tools. Experiments demonstrate that the system can locate stationary surfaces with a repeatability of 0.034 millimeters.

Colloid-facilitated transport of Pu, Am, U, Th, and Np has been recognized as a potentially important phenomenon affecting the performance of the Waste Isolation Pilot Plant (WIPP) facility being developed for safe disposal of transuranic radioactive waste. In a human intrusion scenario, actinide-bearing colloidal particles may be released from the repository and be transported by brines (approximately 0.8 to 3 molal ionic strength) through the Culebra, a thin fractured microcrystalline (mean grain size 2 micrometers) dolomite aquifer overlying the repository. Transport experiments were conducted using sieved, uniformly packed crushed Culebra rock or nonporous dolomite cleavage rhombohedra. Experiments with mineral fragments and fixed and live WIPP-relevant bacteria cultures showed significant levels of retardation due to physical filtration effects. Humic substances were not attenuated by the Culebra dolomite. Comparison of elution curves of latex microspheres in columns prepared with microcrystalline rock and nonporous rock showed minimal effect of Culebra micropores on colloid transport. These data form part of the basis to parameterize numerical codes being used to evaluate the performance of the WIPP.

The People`s Republic of China has undergone major economic reform in the past decade producing a new free-market system that is distinctly Chinese. The Chinese realize that to be successful in world trade, quality management and export trading must be given the highest priority in China`s strategic economic plans. Many manufacturing companies are now implementing Total Quality Management (TQM) and the ISO 9000 i quality management standards. A first hand survey of the quality movement in China today is the objective of this paper.

Vacuum-arc deposition is used to deposit multilayer C films by modulating the sample bias during deposition. Effect of varying the sublayer thickness in multilayer films consisting of alternating layers of ``hard`` (68.4 GPa, -100 V bias) and ``soft`` (27.5 GPa, - 200 V bias) was investigated. Films consisting of equal thickness layers of hard and soft material and an individual layer thickness varying from 10 to 35 nm were deposited. Mechanical property measurements were obtained by finite element modeling of nanoindentation load-displacement curves. The film hardness values were about 20% below the average of the component layers and relatively independent of the layer thickness. TEM revealed deterioration of the multilayer structure when the sublayer thickness was below 15 nm due to implantation damage of the hard layers caused by the energetic C{sup +} ions of the soft layers (-2000 V bias) deposited over them. Pin-on-disk wear tests show that the wear rate drops when sublayer thickness is decreased below 20 nm and remains constant with further decreases in the layer thickness.

We have initiated studies using both solution and solid state magic angle spinning {sup 17}O NMR for a series of oxidatively aged polymers. This short note reports the solution {sup 17}O NMR for oxidatively degraded polypropylene, ethylene-propylene-diene, polyisoprene, and nitrile rubber. Enriched O{sub 2} is used during the accelerated aging. 3 figs, 7 refs.

Results appear to confirm the concept of surfactant-templating of thin film mesostructures. Final film pore structure depends on starting surfactant and water concentrations and process time scale (governed by evaporation rate). Surfactant ordering at substrate-film and film-vapor interfaces orients the porosity of adjoining films, leading to graded structures. SAW experiments show that depending on processing conditions, the porosity may be open or closed (restricted). Open porosity is monosized. Upon pyrolysis, lamellar structures collapse, while the hexagonal structures persist; when both hexagonal and lamellar structures are present, the hexagonal may serve to pillar the lamellar, avoiding its complete collapse. Thick lamellar films can be prepared because the surfactant mechanically decouples stress development in adjoining layers. Upon drying and heating, each individual layer can shrink due to continuing condensation reactions without accumulating stress. During surfactant pyrolysis, the layers coalesce to form a thick crack-free layer. Formation of closed porosity films is discussed.

GaAs Junction Field Effect Transistors (JFETs) are reported with gate lengths down to 0.3 micrometers. The structure is fully self-aligned and employs all ion implantation doping. p[sup +]-gate regions are formed with either Zn or Cd implants along with a P coimplantation to reduce diffusion. The source and rain implants are engineered with Si or SiF implants to minimize short channel effects. JFETs with 0.3 micrometer gate length are demonstrated with a sub-threshold slope of 110 mV/decade along with an intrinsic unity current gain cutoff frequency as high as 52 GHz.

As problems of violence and crime become more prevalent in our schools (or at least the perception of their prevalence), more and more school districts will elect to use security technologies to control these problems. While the desired change in student and community attitudes will require significant systemic change through intense U.S. social programs, security technologies can greatly augment school staff today by providing services similar to having extra adults present. Technologies such as cameras, sensors, drug detection, biometric and personnel identification, lighting, barriers, weapon and explosives detection, anti-graffiti methods, and duress alarms can all be effective, given they are used in appropriate applications, with realistic expectations and an understanding of limitations. Similar to a high-risk government facility, schools must consider a systems (`big picture`) approach to security, which includes the use of personnel and procedures as well as security technologies, such that the synergy created by all these elements together contributes more to the general `order maintenance` of the facility than could be achieved by separate measures not integrated or related.

Site-characterization studies at the Waste Isolation Pilot Plant (WIPP) site in southeastern New Mexico, US identified ground-water flow in the Culebra Dolomite Member of the Rustler Formation as the most likely geologic pathway for radionuclide transport to the accessible environment in the event of a breach of the WIPP repository through inadvertent human intrusion. The results of recent tracer tests, as well as hydraulic tests, laboratory measurements, and re-examination of Culebra geology and stratigraphy, have led to a significant refinement of the conceptual model for transport in the Culebra. Tracer test results and geologic observations suggest that flow occurs within fractures, and to some extent within interparticle porosity and vugs connected by microfractures. Diffusion occurs within all connected porosity. Numerical simulations suggest that the data from the tracer tests cannot be simulated with heterogeneous single-porosity models; significant matrix diffusion appears to be required. The low permeability and lack of significant tracer recovery from tracers injected into the upper Culebra suggest that transport primarily occurs in the lower Culebra.

The solubility of Np(V) and Np(VI) has been measured in three synthetic Na-K-Mg-Cl brines in the presence of CO{sub 2}(g). Experiments were prepared from oversaturation by adding an excess of NpO{sub 2}{sup +} or NpO{sub 2}{sup 2+} to the brines and allowing the neptunium solids to precipitate. Vessels were maintained in contact with fixed CO{sub 2}(g) partial pressures at constant pH and 24 {+-} 1 C. Dissolved Np(V) concentrations decreased several orders of magnitude within the first 100 days of the experiment, while dissolved Np(VI) concentrations decreased initially but then remained relatively constant for more than 400 days. The solid phases formed in all experiments were identified by X-ray powder diffraction as KNpO{sub 2}CO{sub 3}{center_dot}xH{sub 2}O(s). Steady state concentrations for Np(V) are similar to those observed for Pu(V) in the same brines under the same conditions, where Pu occurs predominantly as Pu(V). Similarly, steady state concentrations for Np(VI), which was not reduced over a two year period, compare well with measured Pu(VI) concentrations in the same brines before the Pu(VI) was reduced to Pu(V).

The Atmospheric Radiation Measurement Program is a multi-laboratory, interagency program as part of DOE`s principal entry into the US Global Change Research Program. Two issues addressed are the radiation budget and its spectral dependence, and radiative and other properties of clouds. Measures of solar flux divergence and energy exchanges between clouds, the earth, its oceans, and the atmosphere through various altitudes are sought. Additionally, the program seeks to provide measurements to calibrate satellite radiance products and validate their associated flux retrieval algorithms. Unmanned Aerospace Vehicles fly long, extended missions. MPIR is one of the primary instruments on the ARM-UAV campaigns. A shutter mechanism has been developed and flown as part of an airborne imaging radiometer having application to spacecraft or other applications requiring low vibration, high reliability, and long life. The device could be employed in other cases where a reciprocating platform is needed. Typical shutters and choppers utilize a spinning disc, or in very small instruments, a vibrating vane to continually interrupt incident light or radiation that enters the system. A spinning disk requires some sort of bearings that usually have limited life, and at a minimum introduce issues of reliability. Friction, lubrication and contamination always remain critical areas of concern, as well as the need for power to operate. Dual vibrating vanes may be dynamically well balanced as a set and are frictionless. However, these are limited by size in a practical sense. In addition, multiples of these devices are difficult to synchronize.

A mathematical framework is developed for the study of materials containing axisymmetric inclusions or flaws such as ellipsoidal voids, penny-shaped cracks, or fibers of circular cross-section. The general case of nonuniform statistical distributions of such heterogeneities is attacked by first considering a spatially uniform distribution of flaws that are all oriented in the same direction. Assuming an isotropic substrate, the macroscopic material properties of this simpler microstructure naturally should be transversely isotropic. An orthogonal basis for the linear subspace consisting of all double-symmetric transversely-isotropic fourth-order tensors associated with a given material vector is applied to deduce the explicit functional dependence of the material properties of these aligned materials on the shared symmetry axis. The aligned and uniform microstructure seems geometrically simple enough that the macroscopic transversely isotropic properties could be derived in closed form. Since the resulting properties are transversely isotropic, the analyst must therefore be able to identify the appropriate coefficients of the transverse basis. Once these functions are identified, a principle of superposition of strain rates ay be applied to define an expectation integral for the composite properties of a material containing arbitrary anisotropic distributions of axisymmetric inhomogeneities. A proposal for coupling plastic anisotropy to the elastic anisotropy is presented in which the composite yield surface is interpreted as a distortion of the isotropic substrate yield surface; the distortion directions are coupled to the elastic anisotropy directions. Finally, some commonly assumed properties (such as major symmetry) of the Cauchy tangent stiffness tensor are shown to be inappropriate for large distortions of anisotropic materials.

This paper presents a performance assessment model of dissolved actinide concentrations for the Waste Isolation Pilot Plant (WIPP). The model assesses the concentration of each actinide oxidation state and combines these concentrations with an oxidation state distribution. The chemical behavior of actinides in the same oxidation state is presumed to be very similar for almost all situations, but exceptions arising from experimental evidence are accommodated. The code BRAGFLO calculates the gas pressure, brine mass, gas volume, and mass of remaining Fe and cellulosics for each time step and computational cell. The total CO{sub 2} in the repository and dissolved Ca(OH){sub 2} is estimated. Lookup tables are constructed for pmH and f(CO{sub 2}) as a function of brine type and volume, moles of CO{sub 2}, and Ca(OH){sub 2}. Amounts of five soluble complexants are considered. A model based on the formulation of Harvie et al. produces tables of solubilities for each actinide oxidation state as a function of pmH, f(CO{sub 2}), brine composition, and complexant. Experimental data yield lookup tables of fractions of Th, U, Np, Pu, and Am in each oxidation state as a function of f(CO{sub 2}) and complexant. The tables are then used to provide a concentration of a particular actinide at particular values of pmH and f(CO{sub 2}). Under steady-state conditions, the oxidation state of each actinide that is most stable in the particular chemical environment controls the concentration of that actinide in solution. In the absence of steady-state conditions, the oxidation state distribution of interest is that of the dissolved actinide, and the oxidation states may be treated as if they were separate compounds.

A model is developed to predict the thermal response of real electronic devices during pulsed Nd:YAG laser welding. Modeling laser-part interaction requires incorporation of weld pool hydrodynamics, and laser-metal vapor and laser-surface interactions. Although important information can be obtained from these models, they are not appropriate for use in design of actual components due to computational limitations. In lieu of solving for these detailed physics, a simple model is constructed. In this model, laser-part interactions are accounted for through an empirically determined energy transfer efficiency which is developed through the use of modeling and experiments. This engineering model is appropriate since part thermal response near the weld pool and weld pool shape is not of interest here. Reasonable agreement between predictions and experimental measurements for welding of real components are indicated.

Artificially enhancing the solder ability of a surface can at times prove to be advantageous. As chip packaging geometries become increasingly complex, the issue of solder wettability becomes significantly more important. Here, the authors examine the effect of varying substrate surface roughness on solder wettability (area of spread) and the time required to reach terminal area of spread. Results are given for solder wetting experiments that were performed on copper (Cu) substrates having chemically etched surfaces, as well as, Alumina (Al{sub 2}O{sub 3}) substrates electroplated with various thicknesses of palladium (Pd). The effect of etching on the Al{sub 2}O{sub 3}/Pd specimens was also examined as related to surface roughness and solder spread. These surface treatments were found to significantly alter wettability. Substantial improvements were observed in both solder wettability and time to wet with the uniformly etched Cu surfaces used in this study. For the Cu substrates, the average terminal area of spread is shown to be directly related to the substrates root mean square (RMS) surface roughness. The rate of wetting of the Cu surfaces is also shown to increase when chemical surface treatment is used. Maximum wetting on the Al{sub 2}O{sub 3}/Pd specimens was found to be directly related to surface smoothness. The average terminal area of spread of Al{sub 2}O{sub 3}/Pd specimens is inversely related to the vertical distance from the highest surface peak to the deepest surface valley (i.e., peak-to-peak variation).

Glasses are used extensively by the electronics industry for packaging and in components. Because glasses have such low fracture toughness, glass components must maintain low tensile stresses to avoid cracking and ensure product stability. Modeling is a key tool for developing designs with low tensile stresses. Thermoelastic analyses are ideal for modeling slow, oven controlled processes where the temperature varies uniformly. Many processing environments, however, involve rapid heating and cooling cycles that produce nonhomogeneous temperature fields causing the volume and stresses in the glass to relax at different rates. This structural relaxation is an important nonlinear material behavior that gives rise to a point-to-point variability in effective properties of the material. To accurately model such stresses, a thermal analysis must be coupled to a structural analysis that employs a viscoelastic model of glass. Laser sealing of glasses is an example of a process where thermal history is an important factor in determining the residual stress state. Recent needs to consider laser sealing methods for fiber optic connectors and flat panel displays have spurred the development of coupled, three-dimensional thermal and structural finite element codes. Analyses of the temperatures and stresses generated in a flat panel display during a laser sealing operation are presented, an the idiosyncrasies and importance of modeling coupled thermal/structural phenomena are discussed.

A study was undertaken to examine the use of a number of solution additives in 1M LiPF{sub 6}/ethylene carbonate (EC)-dimethyl carbonate (DMC) solutions to improve the performance of carbon anodes derived from polymethylacrylonitrile (PMAN)-divinylbenzene (DVB) copolymers. The study goals were to improve the cycle life and reduce the formation of the passivation layer during the first reduction, thereby minimizing the irreversible-capacity losses. Additives studied were 12-crown-4 (12-Cr-4) ether, decalin, and dilithium phthalocyanine (Li{sub 2}Pc). The carbon performance was characterized by galvanostatic cycling, cyclic voltammetry, and complex-impedance spectroscopy. Limited success was obtained with 12-Cr-4 ether at 0.25 M and decalin at 1 v/o. Poor results were noted with Li{sub 2}Pc at 0.025 M and 0.5 M.

A study was undertaken to examine the effects of partial oxidation on the electrochemical performance of carbons derived from poly(methylacrylonitrile) (PMAN)-divinylbenzene (DVB) co-polymers. Mild oxidation was examined as a possible technique to increase the reversible capacity, improve cycleability, and reduce the amount of irreversible capacity associated with the formation of the passivation layer during the first reduction. Oxidizing conditions involved treatment of the PMAN carbon prepared at 700 C with dry CO{sub 2} or with steam at 600 C for one hour. The effects on the performance in 1M LiPF{sub 6}/ethylene carbonate (EC)-dimethyl carbonate (DMC) solutions were evaluated by galvanostatic cycling tests, complex-impedance spectroscopy, and, to a more limited extent, cyclic voltammetry. Partial oxidation of PMAN carbon showed little or no overall beneficial effects in performance relative to the control.

This paper presents ion beam induced charge collection (IBICC) contrast images showing regions of differing charge collection efficiency within optoelectronic modulator devices. The experiments were carried out at the Sandia nuclear microprobe using 18 MeV carbon and 2 MeV helium ions. Lines of varying densities are observed to run along the different (110) directions which correlate with misfit dislocations within the 392nm thick strained-layer superlattice quantum well of the modulator structure. Independent cross-sectional TEM studies and the electrical properties of the devices under investigation suggest the presence of threading dislocations in the active device region at a density of {approximately}10{sup 6} cm{sup {minus}2}. However, no clear evidence of threading dislocations was observed in the IBICC images as they are possibly masked by the strong contrast of the misfit dislocations. Charge carrier transport within the modulator is used to explain the observed contrast. The different signal to noise levels and rates of damage of the incident ions are assessed.

The authors have demonstrated the utility of microbeam - Rutherford Back Scattering ({mu} RBS) in spatially resolved studies of operational plasma effects on the interior surfaces of plasma flat panel displays manufactured by Photonics Imaging. The experiments were performed at the Sandia Nuclear microprobe using a 2.8 MeV He beam with an average beam spot size of less than 8{mu}m. The interior surface of the top panes of the flat panels is composed of approximately 800 nm of MgO on top of a 2000nm thick PbO layer. {mu}-RBS of sample panels operated under varying conditions measured changes in the surface MgO film thickness due to plasma erosion and redeposition as accurately as {+-}1.5 nm. The high accuracy in the MgO thickness measurement was achieved by inferring the MgO thickness from the shift of the Pb front edge in the RBS spectrum. An estimate for the thickness accuracy as a function of the acquired statistics is presented. The surface of the flat panels` bottom panes is also comprised of MgO on top of PbO. However, troughs {approximately}100 {mu}m wide by 10{mu}m deep were partially filled with phosphor and cover the entire width of the surface. This leaves only 100pm long sections of MgO within the trough exposed. Using {mu}-RBS, the authors were able to analyze the surface composition of these regions.

Ceramic-metal composites can be made by reactive penetration of molten metals into dense ceramic performs. The metal penetration is driven by a large negative Gibbs energy for reaction, which is different from the more common physical infiltration of porous media. Reactions involving Al can be written generally as (x+2)Al + (3/y)MO{sub y} {yields} Al{sub 2}O{sub 3} + M{sub 3/y}Al{sub x}, where MO{sub y} is an oxide that is wet by molten Al. In low Po{sub 2} atmospheres and at temperature above about 900{degrees}c, molten Al reduces mullite to produce Al{sub 2}O{sub 3} + M{sub 3/y}Al{sub x}, where MO is an oxide that is wet by molten Al. In low Po{sub 2} atmospheres and at temperatures above about 900{degrees}C, molten al reduces mullite to produce Al{sub 2}O{sub 3} and Si. The Al/mullite reaction has a {Delta}G{sub r}{degrees} (1200K) of -1014 kJ/mol and, if the mullite is fully dense, the theoretical volume change on reaction is less than 1%. A microstructure of mutually-interpenetrating metal and ceramic phases generally is obtained. Penetration rate increases with increasing reaction temperature from 900 to 1150{degrees}C, and the reaction layer thickness increases linearly with time. Reaction rate is a maximum at 1150{degrees}C; above that temperature the reaction slows and stops after a relatively short period of linear growth. At 1300{degrees}C and above, no reaction layer is detected by optical microscopy. Observations of the reaction front by TEM show only al and Al{sub 2}O{sub 3} after reaction at 900{degrees}C, but Si is present in increasing amounts as the reaction temperature increases to 1100{degrees}C and above. The kinetic and microstructural data suggest that the deviation from linear growth kinetics at higher reaction temperatures and longer times is due to Si build-up and saturation at the reaction front. The activation energy for short reaction times at 900 to 1150{degrees}C varies from {approximately}90 to {approximately}200 kJ/mole.

The partially stabilized zirconia powders used to plasma spray thermal barrier coatings typically exhibit broad particle-size distributions. There are conflicting reports in the literature about the extent of injection-induced particle-sizing effects in air plasma-sprayed materials. If significant spatial separation of finer and coarser particles in the jet occurs, then one would expect it to play an important role in determining the microstructure and properties of deposits made from powders containing a wide range of particle sizes. This paper presents the results of a study in which a commercially available zirconia powder was fractionated into fine, medium, and coarse cuts and sprayed at the same torch conditions used for the ensemble powder. Diagnostic measurements of particle surface temperature, velocity, and number-density distributions in the plume for each size-cut and for the ensemble powder are reported. Deposits produced by traversing the torch back and forth to produce a raised bead were examined metallographically to study their shape and location with respect to the torch centerline and to look at their internal microstructure. The results show that, for the torch conditions used in this study, the fine, medium, and coarse size-cuts all followed the same mean trajectory. No measureable particle segregation effects were observed. Considerable differences in coatings microstructure were observed. These differences can be explained by the different particle properties measured in the plume.

Consider mapping a regular i x j quadrilateral mesh of a rectangle onto a surface. The quality of the mapped mesh of the surface depends heavily on which vertices of the surface correspond to corners of the rectangle. The authors problem is, given an n-sided surface, chose as corners four vertices such that the surface resembles a rectangle with corners at those vertices. Note that n could be quite large, and the length and width of the rectangle, i and j, are not prespecified. In general, there is either a goal number or a prescribed number of mesh edges for each bounding curve of the surface. The goals affect the quality of the mesh, and the prescribed edges may make finding a feasible set of corners difficult. The algorithm need only work for surfaces that are roughly rectangular, particular those without large reflex angles, as otherwise an unstructured meshing algorithm is used instead. The authors report on the theory and implementation of algorithms for this problem. They also given an overview of a solution to a related problem called interval assignment: given a complex of surfaces sharing curves, globally assign the number of mesh edges or intervals for each curve such that it is possible to mesh each surface according to its prescribed quadrilateral meshing algorithm, and assigned and user-prescribed boundary mesh edges and corners. They also note a practical, constructive technique that relies on interval assignment that can generate a quadrilateral mesh of a complex of surfaces such that a compatible hexahedral mesh of the enclosed volume exists.

Convergent lines of evidence are reviewed which show that near-interfacial oxide traps (border traps) that exchange charge with the Si can strongly affect the performance, radiation response, and long-term reliability of MOS devices. Observable effects of border traps include capacitance-voltage (C-V) hysteresis, enhanced 1/f noise, compensation of trapped holes, and increased thermally stimulated current in MOS capacitors. Effects of faster (switching times between ∼10-6 s and ∼1 s) and slower (switching times greater than ∼1 s) border traps have been resolved via a dual-transistor technique. In conjunction with studies of MOS electrical response, electron paramagnetic resonance and spin dependent recombination studies suggest that E' defects (trivalent Si centers in SiO2 associated with O vacancies) can function as border traps in MOS devices exposed to ionizing radiation or high-field stress. Hydrogen-related centers may also be border traps. © 1996 IEEE.

Structurally disordered refractory ternary films such as titanium silicon nitride (Ti-Si-N) have potential as advanced diffusion barriers in future ULSI metallization schemes. Here we present results on purely thermal metallorganic chemical vapor deposition (CVD) of Ti-Si-N. At temperatures between 300 and 450 °C, tetrakis(diethylamido)titanium (TDEAT), silane, and ammonia react to grow Ti-Si-N films with Si contents of 0-20 at.%. Typical impurity contents are 5-10 at.%H and 0.5 to 1.5 at.% C, with no O or other impurities detected in the bulk of the film. Although the film resistivity increases with increasing Si content, it remains below 1000 μΩ-cm for films with less than 5 at.% Si. These films are promising candidates for advanced diffusion barriers.

Ion implantation has been an enabling technology for the realization of many high performance electronic devices in III-V semiconductor materials. We report on advances in ion implantation processing technology for application to GaAs JFETs, AlGaAs/GaAs HFETs, and InGaP or InAlP-barrier HFETs. In particular, the GaAs JFET has required the development of shallow p-type implants using Zn or Cd with junction depths down to 35 nm after the activation anneal. Implant activation and ionization issues for AlGaAs will be reported along with those for InGaP and InAlP. A comprehensive treatment of Si-implant doping of AlGaAs is given based on the donor ionization energies and conduction band density-of-states dependence on Al-composition. Si and Si+P implants in InGaP are shown to achieve higher electron concentrations than for similar implants in AlGaAs due to the absence of the deep donor (DX) level. An optimized P co-implantation scheme in InGaP is shown to increase the implanted donor saturation level by 65%.

III-N photonic devices have made great advances in recent years following the demonstration of doping of GaN p-type with Mg and n-type with Si. However, the deep ionization energy level of Mg in GaN (approximately 160 meV) limits the ionized of acceptors at room temperature to less than 1.0% of the substitutional Mg. With this in mind, we used ion implantation to characterize the ionization level of Ca in GaN since Ca had been suggested by Strite to be a shallow acceptor in GaN. Ca-implanted GaN converted from n-to-p type after a 1100 °C activation anneal. Variable temperature Hall measurements give an ionization level at 169 meV. Although this level is equivalent to that of Mg, Ca-implantation may have advantages (shallower projected range and less straggle for a given energy) than Mg for electronic devices. In particular, we report the first GaN device using ion implantation doping. This is a GaN junction field effect transistor (JFET) which employed Ca-implantation. A 1.7 μm JFET had a transconductance of 7 mS/mm, a saturation current at 0 V gate bias of 33 mA/mm, a ft of 2.7 GHz, and a fmax of 9.4 GHz. O-implantation was also studied and shown to create a shallow donor level (approximately 25 meV) that is similar to Si. SIMS profiles of as-implanted and annealed samples showed no measurable redistribution of either Ca or O in GaN at 1125 °C.

The spectral editing properties of the 29Si NMP, INEPT heteronuclear transfer experiment have been utilized for the identification and characterization of hydrolysis and initial condensation products in methyltrimethoxysilane (MTMS) sol-gel materials. 29Si NMR assignments in MTMS are complicated by a small spectral dispersion (approximately 0.5 ppm) and two different 29Si-1H J couplings. By using analytical expressions for the INEPT signal response with multiple heteronuclear J couplings, unambiguous spectral assignments can be made. For this organomethoxysilane the rate of hydrolysis was found to be very rapid and significantly faster than either the water- or alcohol-producing condensation reactions. The hydrolysis species of both the MTMS monomer and its initial T1 condensation products follow statistical distributions that can be directly related to the extent of the hydrolysis reactions. The role of the statistical distribution of hydrolysis products on the production and synthetic control of organically modified sol-gels is discussed.

We discuss the selective conversion of buried layers of AlGaAs to a stable oxide and the implementation of this oxide into high performance vertical-cavity surface emitting lasers (VCSELs). The rate of lateral oxidation is shown to be linear with an Arrhenius temperature dependence. The measured activation energies vary with Al composition, providing a high degree of oxidation selectivity between AlGaAs alloys. Thus buried oxide layers can be selectively fabricated within the VCSEL through small compositional variations in the AlGaAs layers. The oxidation of AlGaAs alloys, as opposed to AlAs, is found to provide robust processing of reliable lasers. The insulating and low refractive index oxide provides enhanced electrical and optical confinement for ultralow threshold currents in oxide-apertured VCSELs.

The ability of high gain GaAs Photoconductive Semiconductor switches (PCSS) to deliver high peak power, fast risetime pulses when triggered with small laser diode arrays makes them suitable for their use in radars that rely on fast impulses. This type of direct time domain radar is uniquely suited for observation of large structures under ground because it can operate at low frequencies and at high average power. This paper will summarize the state-of-the-art in high gain GaAs switches and discuss their use in a radar transmitter. We will also present a summary of an analysis of the effectiveness of different pulser geometries that result in transmitted pulses with varying frequency content. To this end we developed a simple model that includes transmit and receive antenna response, attenuation and dispersion of the electromagnetic impulses by the soil, and target cross sections.

Gallium nitride (GaN) and related III-Nitride materials (AlN, InN) have recently been the focus of extensive research for photonic and electronic device applications. As this material system matures, ion implantation doping and isolation is expected to play an important role in advance device demonstrations. To this end, we report the demonstration of implanted p-type doping with 24Mg+31P and 40Ca as well as n-type doping with Si in GaN. These implanted dopants require annealing approximately 1100 °C to achieve electrical activity, but demonstrate limited redistribution at this temperature. The redistribution of other potential dopants in GaN (such as Be, Zn, and Cd) will also be reported. Results for a GaN junction field effect transistor (JFET), the first GaN device to use implantation doping, will also be presented.

A survey is made of acoustic devices that are suitable as gas and vapor sensors. This survey focuses on attributes such as operating frequency, mass sensitivity, quality factor (Q), and their ability to be fabricated on a semiconductor substrate to allow integration with electronic circuitry. The treatment of the device surface with chemically-sensitive films to detect species of interest is discussed. Strategies for improving discrimination are described, including sensor arrays and species concentration and separation schemes. The advantages and disadvantages of integrating sensors with microelectronics are considered, along with the effect on sensitivity of scaling acoustic gas sensors to smaller size.

An accurate first-principles analysis to probe the threshold properties of selectively oxidized vertical-cavity surface-emitting lasers (VCSELs) were developed. The analysis indicates that in order to achieve ultralow threshold, oxide aperture scattering loss and leakage currents must be addressed. The agreement between calculations and experiment solidify the understanding and enable the identification of fundamental limitations of low threshold VCSEL operation. The performance and analysis of modified VCSEL designs are presented.

A monochrome 2f optical performance measurement system was developed at Sandia. To meet the goals of an optical test method that can be done in a relatively short period of time, requires little space, uses `off the shelf' test equipment, and provides a quantitative measure adequate to address quality control requirements, necessitates conversion of the system to use color. This test method is based on common ray trace calculations for targets and images at the radius of curvature for spherical and parabolic (f/D>3) concentrators. The implementation of a color system involved changing hardware and software. Target design - the layout, materials, and color selection - is a primary consideration. As the system development neared completion, it was used in several applications to measure solar concentrator facet performance and evaluate system performance. Included in this testing was a side-by-side test with the SHOT system at the National Renewable Energy Laboratory. This paper discusses the development of the color system hardware, reviews the results of testing, and presents requirements for the color system software.

This paper describes our initial investigations to determine the suitability of Ion Mobility Spectrometry (IMS) as an on-line, real-time monitor for ultrapure water systems. We have found that acetone, ethylene glycol, isopropanol, chloroform, and n-methyl pyrrolidone (NMP) can be detected at parts-per-million levels or lower using this technique. As expected, surfactants, such as dodecylsulfate sodium salt, dodecyl-trimethylammonium bromide, and hexadecyl trimethylammonium bromide were not detected. Several sample introduction schemes are proposed for continual monitoring of ultrapure water (UPW) streams.

In this work, high-energy electron beam brazing of a ceramic part is modeled numerically. The part considered consists of a ceramic cylinder and disk between which is sandwiched an annular washer of braze material. An electron beam impinges on the disk, melting the braze metal. The resulting coupled electron-photon and thermal transport equations are solved using Monte Carlo and finite element techniques respectively. Results indicate that increased electron beam current decreases the time required to melt the braze while increasing temperature gradients in the ceramic near the braze. Furnace brazing was also simulated and predicted results indicate increased processing times relative to electron beam brazing.

An oscillator circuit has been developed at Sandia National Laboratories that uses Inverted-Mesa resonators, in a high-precision VCO application, at frequencies historically dominated by SAW designs. This design incorporates a frequency tripler that provides a 600 MHz output capability using a 200 MHz 3rd overtone resonator. This design has some advantages over equivalent SAW alternatives: lower power-consumption, superior aging characteristics, linear frequency pulling and low frequency versus temperature sensitivity. The VCO presented demonstrates <+/-60 ppm pullability (0 to 7 V control), tuning linearity better than +/-5% with phase noise at 1 kHz >-110 dBc/Hz. This oscillator-tripler exploits the nonlinear characteristics of an emitter-coupled-pair differential amplifier to obtain a high-performance oscillator design.

The planarization technology of chemical-mechanical- polishing (CMP), used for the manufacturing of multilevel metal interconnects for high-density integrated circuits, is also readily adaptable as an enabling technology in micro- electro-mechanical systems (MEMS) fabrication, particularly polysilicon surface micromachining. CMP not only eases the design and manufacturability of MEMS devices by eliminating several photolithographic and film issues generated by severe topography, but also enables far greater flexibility with process complexity and associated designs. Thus, the CMP planarization technique alleviates processing problems associated with fabrication of multilevel polysilicon structures, eliminates design constraints linked with non- planar topography, and provides an avenue for integrating different process technologies. Examples of these enhancements include: a simpler extension of surface micromachining fabrication to multiple mechanical layers, a novel method of monolithic integration of electronics and MEMS, and a novel combination of bulk and surface micromachining.

A release etch model for etching sacrificial oxides in aqueous HF solutions is presented. This model is an extension of work done by Monk et. al. and Liu et. al The model is inherently one dimensional, but can be used to model the etching of complex three dimensional parts. Solutions and boundary conditions are presented for a number of geometries.

An electromechanical model of Sandia's microengine is developed and applied to quantify critical performance tradeoffs. This is done by determining how forces impact the mechanical response of the engine to different electrical drive signals. To validate the theoretical results, model- based drive signals are used to operate actual engines, where controlled operation is achieved for the following cases: 1) spring forces are dominant, 2) frictional forces are dominant, 3) linear inertial forces are dominant, 4) viscous damping forces are dominant, and 5) inertial load forces are dominant. Significant improvements in engine performance are experimentally demonstrated in the following areas: positional control, start/stop endurance, constant speed endurance, friction load reduction,and rapid actuation of inertial loads.

For high-speed integrated circuit applications, it is important to interconnect decoupling capacitors and integrated circuits (ICs) as intimately as possible, to minimize parasitic impedances. This can be achieved by mounting freestanding, thin film capacitors directly onto ICs as part of a chip-scale packaging approach. These `applique' capacitors utilize a chemically-prepared PLZT dielectric, which is nominally 1 μm thick. The small size and weight of applique capacitors can be used to improve packaging efficiency. Applique capacitors, which are initially fabricated on silicon wafers, have high permittivity (ε≅1000), low loss (tanδ≅0.01) and high breakdown strength (EB≅1 MV/cm) and leakage resistance (ρ>1014 Ω-cm 125 °C). Various processes being developed to remove the capacitors from the silicon substrate and reattach them to ICs is described. In addition, a concept for interconnecting the capacitors using a repatterning process is discussed.

To demonstrate a system integration process for Micro-Electro-Mechanical Systems (MEMS), we are building an active cooling MEMS unit for microelectronics applications. This integrated unit will incorporate a micropump, temperature sensors, microchannels, and heat exchange devices into a single unit. The first phase of this research project is to develop and test a micropump capable of moving the working fluid within the integrated device. This paper will discuss the design, development, testing, and evaluation of a micropump concept. The micropump which was developed is an electrohydrodynamic (EHD) injection pump. Fabrication of the pump was accomplished using laser micromachining technology, and two initial designs were examined for full fabrication. The first design has two silicon parts stacked vertically on top of each other. Gold is deposited on one side of each stacked plate to serve as electrodes for the electrohydrodynamic pump. A Nd:YAG laser is used to drill an array of circular holes in the "well" region of both silicon parts, leaving an open pathway for fluid movement. Next the silicon parts are aligned and bonded together, thus becoming a EHD pump. Fluid flow has been observed when an electric voltage is applied across the electrodes. The second design has the silicon parts which contain the flow grid oriented "back-to-back" and bonded together. This "back-to-back" design has a shorter grid distance between the anode and cathode plates so that a smaller voltage is required for pumping. Preliminary results from laboratory experiments have demonstrated that this EHD micropump design can achieve a pressure head of about 287 Pa with an applied voltage of 120 V.

In applications where multiple magnetic modulators are used to drive a single Linear Induction Voltage Adder (LIVA) or Linear Accelerator (LINAC), it is essential that the outputs of the modulators be synchronized. Output rise times are typically in the 10 ns to 20 ns range, often making it necessary to synchronize to within less than 1 ns. Microprocessor and electronic feedback schemes have been developed and demonstrated that achieve the required level of synchronization, however, they are sophisticated and potentially complex. In a quest for simplicity, this work seeks to determine the achievable level of modulator to modulator timing jitter that can be obtained with simple design practices and passive techniques. Sources of output pulse time jitter in magnetic modulators are reviewed and some basic modulator design principles that can be used to minimize the intrinsic time jitter between modulators are discussed. A novel technique for passive synchronization is presented.

High network performance is essential to satisfying a wide class of High Performance Computing and Communication (HPCC) user needs. The requirements of these applications for high throughput and low interactive response time have focused this research on the scaling of technology far past the performance of the newest data telecommunication industry standards in order to facilitate the design of communication systems of interest to the HPCC community. These applications require Local Area Network (LAN) and Wide Area Network (WAN) performance in the 10 to 100 Gigabit per second (Gb/s) range, far greater than the 0.05 Gb/s performance typical of today`s LANs or WANs. This research investigated various approaches to achieving 10 to 100 Gigabit per second performance, developed a communication architecture to achieve this performance, and tested the viability of selected techniques through simulation and prototyping.

We review the processes and mechanisms by which voltage offsets occur in the hysteresis loop of ferroelectric materials. Simply stated, voltage shifts arise from near-interfacial charge trapping in the ferroelectric. We show that the impetus behind voltage shifts in ferroelectric capacitors is the net polarization, with the net polarization being determined by the perovskite and the aligned defect-dipole components. Some common defect-dipoles in the PZT system are lead vacancy-oxygen vacancy complexes. One way to change the net polarization in the ferroelectric is to subject the PZT capacitor to a dc bias at elevated temperature; this process is spectroscopically shown to align defect-dipoles along the direction of the applied electric field. The alignment of defect-dipoles can strongly impact several material properties. One such impact is that it can lead to enhanced voltage shifts (imprint). It is proposed that the net polarization determines the spatial location of the asymmetrically trapped charge that are the cause for the voltage shifts. An enhanced polarization at one electrode interface can lead to larger voltage shifts since it lowers the electrostatic potential well for electron trapping, i.e., more electron trapping can occur. Defect-dipole alignment is also shown to increase the UV sensitivity of the ferroelectric.

A prototype sensor fusion framework called the {open_quotes}Knowledge Assistant{close_quotes} has been developed and tested on a gantry robot at Sandia National Laboratories. This Knowledge Assistant guides the robot operator during the planning, execution, and post analysis stages of the characterization process. During the planning stage, the Knowledge Assistant suggests robot paths and speeds based on knowledge of sensors available and their physical characteristics. During execution, the Knowledge Assistant coordinates the collection of data through a data acquisition {open_quotes}specialist.{close_quotes} During execution and post analysis, the Knowledge Assistant sends raw data to other {open_quotes}specialists,{close_quotes} which include statistical pattern recognition software, a neural network, and model-based search software. After the specialists return their results, the Knowledge Assistant consolidates the information and returns a report to the robot control system where the sensed objects and their attributes (e.g. estimated dimensions, weight, material composition, etc.) are displayed in the world model. This paper highlights the major components of this system.

State and Federal regulations have been implemented that are intended to encourage more widespread use of low-emission vehicles. These regulations include requirements of the California Air Resources Board (CARB) and regulations pursuant to the Clean Air Act Amendments of 1990 and the Energy Policy Act. If the market share of electric vehicles increases in response to these initiatives, corresponding growth will occur in quantities of spent electric vehicle batteries for disposal. Electric vehicle battery recycling infrastructure must be adequate to support collection, transportation, recovery, and disposal stages of waste battery handling. For some battery types, such as lead-acid, a recycling infrastructure is well established; for others, little exists. This paper examines implications of increasing electric vehicle use for lead recovery infrastructure. Secondary lead recovery facilities can be expected to have adequate capacity to accommodate lead-acid electric vehicle battery recycling. However, they face stringent environmental constraints that may curtail capacity use or new capacity installation. Advanced technologies help address these environmental constraints. For example, this paper describes using backup power to avoid air emissions that could occur if electric utility power outages disable emissions control equipment. This approach has been implemented by GNB Technologies, a major manufacturer and recycler of lead-acid batteries. Secondary lead recovery facilities appear to have adequate capacity to accommodate lead waste from electric vehicles, but growth in that capacity could be constrained by environmental regulations. Advances in lead recovery technologies may alleviate possible environmental constraints on capacity growth.

The disturbed-rock zone surrounding the air-intake shaft at the Waste Isolation Pilot Plant (WIPP) site was investigated to determine the extent and the permeability of the disturbed-rock zone as a function of radial distance from the 6.1 m diameter shaft, at different elevations within the Salado. Gas- and brine-permeability tests were performed in the bedded halite of the Salado formation at two levels within the air-intake shaft. The gas- and brine-permeability test results demonstrated that the radial distance to an undisturbed formation permeability of 1 {times} 10{sup {minus}21} m{sup 2} was less than 3.0 m.

The primary current-collector materials being used in lithium-ion cells are susceptible to environmental degradation: aluminum to pitting corrosion and copper to environmentally assisted cracking. Pitting occurs at the highly oxidizing potentials associated with the positive-electrode charge condition. However, the pitting mechanism is more complex than that typically observed in aqueous systems in that the pits are filled with a mixed metal/oxide product and exist as mounds or nodules on the surface. Electrochemical impedance was shown to be an effective analytical tool for quantification and verification of visual observations and trends. Two fluorocarbon-based coatings were shown to improve the resistance of Al to localized pitting. Finally, environmental cracking of copper can occur at or near the lithium potential and only if specific metallurgical conditions exist (work hardening and large grain size).

Highly crystalline nanoclusters of MoS{sub 2} were synthesized and their optical absorption and photoluminescence spectra were investigated. Key results include: (1) strong quantum confinement effects with decreasing size; (2) preservation of the quasiparticle (or excitonic) nature of the optical response for clusters down to {approximately} 2.5 nm in size which are only two unit cells thick; (3) demonstration that 3-D confinement produces energy shifts which are over an order of magnitude larger than those due to 1-D confinement; (4) observation of large increases in the spin-orbit splittings at the top of the valence band at the K and M points of the Brillouin zone with decreasing cluster size; and (5) observation of photoluminescence due to both direct and surface recombination. Application is to photocatalysts for solar fuel production and detoxification of chemical waste.

Buried oxides formed from the wet oxidation of AlGaAs alloys, rather than AlAs, are found to be superior in terms of oxidation isotropy, mechanical stability, and strain. It is not surprising that vertical-cavity surface-emitting lasers (VCSELs) using AlGaAs oxide layers as current apertures have shown promising reliability as compared to VCSELs using AlAs layers. Comparisons of lifetime data for VCSELs with differing oxide layers is presented. The beneficial properties of oxides converted from AlGaAs alloys are found to provide robust device processing of reliable VCSELs and may play an important role in other advanced optoelectronic devices.

The Treaty on Open Skies is a precedent-setting agreement that allows signatory states to fly aircraft over each other`s territory with sensor systems. The purpose of the Treaty is to improve confidence and security with respect to military activities of the signatories. This paper reviews the sensor technology that is currently allowed by the Treaty on Open Skies and potential future sensor technology. The Treaty on Open Skies does have provisions to allow for the improvement of the technology of the current sensor systems and for the proposal of new sensors after a period of time. This can occur only after the Treaty has been ratified and has entered into force. If this regime was to be used for other than Treaty on Open Skies applications some modifications to the allowed sensor technology should be examined. This paper presents some ideas on potential improvements to existing allowed sensor technology as well as some suggested new advanced sensor systems that would be useful for future potential monitoring of safeguard`s related activities. This paper addresses advanced imaging sensors and non-imaging sensors for potential use in aerial remote sensing roles that involve international data sharing.

An acoustic emission test for aircraft Halon bottles has been developed in response to a need expressed by the US Airline Industry. During this development many choices had to be made about test methods, procedures and analysis techniques. This paper discusses these choices and how successful they were. The test itself was designed to replace the currently required hydrostatic test for these bottles. The necessary load is applied by heating the sealed bottles. Acoustic emission is monitored, during the heating, by six sensors held in position by a special fixture. A prototype of the test apparatus was constructed and used in two commercial Halon bottle repair and test facilities. Results to date indicate that about 97% of the bottles tested show no indications of flaws. The other 3% have had indications of possible flaws in non-critical areas of the bottles. All bottles tested to date have passed the hydrostatic test subsequent to the acoustic emission test.

A method for modeling the initiation and growth of discrete delaminations in shell-like composite structures is presented. The laminate is divided into two or more sublaminates, with each sublaminate modeled with four-noded quadrilateral shell elements. A special, eight-noded hex constraint element connects opposing sublaminate shell elements. It supplies the nodal forces and moments needed to make the two opposing shell elements act as a single shell element until a prescribed failure criterion is satisfied. Once the failure criterion is attained, the connection is broken, creating or growing a discrete delamination. This approach has been implemented in a 3D finite element code. This code uses explicit time integration, and can analyze shell-like structures subjected to large deformations and complex contact conditions. The shell elements can use existing composite material models that include in-plane laminate failure modes. This analysis capability was developed to perform crashworthiness studies of composite structures, and is useful whenever there is a need to estimate peak loads, energy absorption, or the final shape of a highly deformed composite structure. This paper describes the eight-noded hex constraint element used to model the initiation and growth of a delamination, and discusses associated implementation issues. Particular attention is focused on the delamination growth criterion, and it is verified that calculated results do not depend on element size. In addition, results for double cantilever beam and end notched flexure specimens are presented and compared to measured data to assess the ability of the present approach to model a growing delamination.

Expanded-mode semiconductor lasers are of great interest due to the benefits of reduced far-field divergence and improved coupling efficiency to optical fiber. The authors present a new diode laser using a Tapered-Rib Adiabatic-Following Fiber Coupler (TRAFFiC) to achieve 2D mode expansion without epitaxial regrowth or sharply-defined tips on tapered waveguides. The expanded mode size would allow 0.25 to 1 dB coupling loss to standard telecommunications fiber making smaller-core specialty fibers unnecessary, increasing misalignment tolerance, and eliminating the need for coupling optics.

I{sub DDQ} testing has become an important contributor to quality improvement of CMOS ICs. This paper describes high resolution I{sub DDQ} characterization and testing (from the sub-nA to {micro}A level) and outlines test hardware and software issues. The physical basis of I{sub DDQ} is discussed. Methods for statistical analysis of I{sub DDQ} data are examined, as interpretation of the data is often as important as the measurement itself. Applications of these methods to set reasonable test limits for detecting defective product are demonstrated.

Grey logic is not another name for fuzzy logic. Grey logic--also called grey analysis or grey system theory--is a new technology, a group of techniques for system analysis and modeling. Like fuzzy logic, grey logic is useful in situations with incomplete and uncertain information. Grey analysis is particularly applicable in instances with very limited data and in cases with little system knowledge or understanding. In this paper, a summary of the basic concepts of grey analysis is provided, with descriptions of its application to several classes of problems. Calculations methods are provided for grey relation analysis, and for modeling and prediction using grey methods.

Ion implantation has played an enabling role in the realization of many high performance photonic and electronic devices in mature semiconductor materials systems such as Si and GaAs. This can also be expected to be the case in III-Nitride based devices as the material quality continues to improve. This paper reviews the progress in ion implantation processing of the III-Nitride materials, namely, GaN, AlN, InN and their alloys. Details are presented of the successful demonstrations of implant isolation as well as n- and p-type implantation doping of GaN. Implant doping has required activation annealing at temperatures in excess of 1,000 C. The nature of the implantation induced damage and its response to annealing is addressed using Rutherford Backscattering. Finally, results are given for the first demonstration of a GaN device fabricated using ion implantation doping, a GaN junction field effect transistor (JFET).

This report represents a summary of a Laboratory Directed Research and Development (LDRD) project to develop general purpose unstructured grid techniques for solving free and moving boundary problems in computational fluid dynamics and heat transfer. Both control volume finite element and Galerkin finite element techniques were utilized. A very robust technique for keeping the deforming mesh from tangling was implemented; the mesh was treated as a fictitious elastic body. Sample results for an ablating nose tip and buoyancy driven flow in a box are presented. References to additional publications resulting from this work are included.

Liaison Based Assembly Design extends the current information infrastructure to support design in terms of kinematic relationships between parts, or liaisons. These liaisons capture information regarding contact, degrees-of-freedom constraints and containment relationships between parts in an assembly. The project involved defining a useful collection of liaison representations, investigating their properties, and providing for maximum use of the data in downstream applications. We tested our ideas by implementing a prototype system involving extensions to Pro/Engineer and the Archimedes assembly planner. With an expanded product model, the design system is more able to capture design intent. When a product update is attempted, increased knowledge availability improves our ability to understand the effect of design changes. Manufacturing and analysis disciplines benefit from having liaison information available, so less time is wasted arguing over incomplete design specifications and our enterprise can be more completely integrated.

The performance, reliability and radiation hardness of modern bipolar/BiCMOS devices and IC`s is limited by changes in surface recombination velocity and surface potential due to oxide-trap charge in the base oxide and near-midgap interface traps at the emitter- base/oxide interface. This report discusses how this charge trapping is enhanced by low-rate radiation as with implantation and annealing.

This report describes progress on the development of engineered photocatalysts for the detoxification of water polluted with toxic organic compounds and heavy metals. We examined a range of different oxide supports (titania, alumina, magnesia and manganese dioxide) for tin uroporphyrin and investigated the efficacy of a few different porphyrins. A water-soluble octaacetic-acid-tetraphenylporphyrin and its derivatives have been synthesized and characterized in an attempt to design a porphyrin catalyst with a larger binding pocket. We have also investigated photocatalytic processes on both single crystal and powder forms of semiconducting SiC with an ultimate goal of developing a dual-semiconductor system combining TiO{sub 2} and SiC. Mathematical modeling was also performed to identify parameters that can improve the efficiency of SiC-based photocatalytic systems. Although the conceptual TiO{sub 2}/SiC photodiode shows some promises for photoreduction processes, SiC itself was found to be an inefficient photocatalyst when combined with TiO{sub 2}. Alternative semiconductors with bandgap and band potentials similar to SiC should be tested in the future for further development and a practical utilization of the dual photodiode concept.

Numerical simulation has been used to enhance conceptual understanding, of the hydrogeology of the Culebra Dolomite in the context of regional groundwater flow. The hydrogeology is of interest because this unit is a possible pathway for offsite migration of radionuclides from a proposed repository for defense-generated transuranic wastes (the Waste Isolation Pilot Plant). The numerical model used is three-dimensional, extends laterally to topographic features that form the actual boundaries of a regional groundwater system, and uses a free-surface upper boundary condition to simulate the effect of change in the rate of recharge on groundwater flow. Steady-state simulations were performed to examine the sensitivity of simulation results to assumed values for hydraulic conductivity and recharge rate. Transient simulations, covering the time period from 14,000 years in the past to 10,000 years in the future, provided insight into how patterns of groundwater flow respond to changes in climate. Simulation results suggest that rates and directions of Groundwater flow in the Culebra change with time due to interaction between recharge, movement of the water table, and the topography of the land surface. The gentle east-to-west slope of the land surface in the vicinity of the WIPP caused groundwater in the Culebra to flow toward and discharge into Nash Draw, a topographic depression. Modern-day flow directions in the Culebra reflect regional rather than local features of the topography. Changes in Groundwater flow, however, lagged behind changes in the rate of recharge. The present-day position of the water table is still adjusting to the decrease in recharge that ended 8,000 years ago. Contaminants introduced into the Culebra will travel toward the accessible environment along the Culebra rather than by leaking upward or downward into other units. Natural changes in flow over the next 10,000 years will be small and will mainly reflect future short-term wet periods.

This annotated briefing documents an economic analysis of Sandia`s system-level test facilities maintained and operated by the Design, Evaluation, and Test Technology Center 9700. The study was divided into four primary sub-tasks: (1) Estimation of the future system-level test workload, (2) Development of a consistent economic model to estimate the cost of maintaining and operating the test facilities, (3) Determination of the availability of viable alternative test sites, and (4) Assessment of the potential savings through reduction of excess capacity under various facility-closure scenarios. The analysis indicated that potential savings from closing all facilities could approach $6 million per year. However, large uncertainties in these savings remove any sound economic arguments for such closure: it is possible that testing at alternative sites could cost more than maintaining the current set of system-level test facilities. Finally, a number of programmatic risks incurred by facility closure were identified. Consideration of facility closure requires a careful weighing of any projected economic benefit against these programmatic risks. This summary report covers the briefing given to upper management. A more detailed discussion of the data and analyses is given in the full report, available for internal use from the technical library.

The primary objective of this project is to develop and demonstrate a close-coupled barrier for the containment of subsurface waste or contaminant migration. A close-coupled barrier is produced by first installing a conventional cement grout curtain followed by a thin inner lining of a polymer grout. The resultant barrier is a cement polymer composite that has economic benefits derived from the cement and performance benefits from the durable and resistant polymer layer. Close-coupled barrier technology is applicable for final, interim, or emergency containment of subsurface waste forms. Consequently, when considering the diversity of technology application, the construction emplacement and material technology maturity, general site operational requirements, and regulatory compliance incentives, the close-coupled barrier system provides an alternative for any hazardous or mixed waste remediation plan. This paper discusses the installation of a close-coupled barrier and the subsequent integrity verification.

We conducted depth of penetration experiments into limestone targets with 3.0 caliber-radius-head, 4340 Rc 45 steel projectiles. Powder guns launched two projectiles with length-to-diameter ratios of ten to striking velocities between 0.4 and 1.5 km/s. Projectiles had diameters and masses of 12.7 mm, 0. 117 kg and 25.4 mm, 0.610 kg. Based on data sets with these two projectile scales, we proposed an empirical penetration equation that described the target by its density and an empirical strength constant determined from penetration depth versus striking velocity data.

The morphology of alumina and scandia ceramics exposed to controlled vacuum and diffusion modes in a thermionic converter has been studied. Evidence for vaporization at a temperature of 1,770 K is manifest in the resulting surface morphologies of both ceramics, consistent with reported sample mass loss. Alumina shows intergranular relief with the formation of terrace--step structure on the grain surfaces. Terrace formation is not directly observed on scandia, however the development of vertical structure and maintenance of voids indicates that vaporization is initiated by structure at the grain edges. Extensive Sc{sub 2}O{sub 3} re-deposition occurs on the scandia surface, possibly mediated by the presence of molybdenum and tungsten. Evidence exists for refractory metal secondary phase formation in this deposit in the form of Sc{sub 6}MO{sub 12} (M = W or Mo). Alumina also shows evidence for materials` interactions in the form of tantalum assisted vaporization which significantly alters the terrace structure.

The increasing use of on-site inspection (OSI) to meet the nation`s obligations with recently signed treaties requires the nation to manage a variety of inspection requirements. This document describes a prototype automated system to assist in the preparation and management of these inspections.

In SECY-90-016, the NTRC proposed a safety goal of a conditional containment failure probability (CCFP) of 0.1 and the alternative acceptance criteria allowed for steel containments, which specifies that the stresses should not exceed ASNE Level C allowables for severe accident pressures and temperatures. In this work, the need for an equivalent criterion for concrete containments was studied. Six surrogate containments were designed and analyzed in order to compare the margins between design pressure, pressure resulting in exceedance of Level C (or yield) stress limits, and ultimate pressure. For comparability, each containment has an identical internal volume and design pressure. Results from the analysis showed margins to yield are comparable and display a similar margin for both steel and concrete containments. In addition, the margin to failure, although slightly higher in the steel containments, were also comparable. Finally, a CCFP for code design was determined based on general membrane behavior and imposing an upper bound severe accident curve developed in the DCH studies. The resulting CCFP`s were less then 0.02 (or 2%) for all the surrogate containments studied, showing that these containment designs all achieved the NRC safety goal.

The Department of Energy`s Hanford Tank Waste Remediation system poses a significant challenge for hazard management because of the uncertainty that surrounds many of the variables that must be considered in decisions on safety and control strategies. As a result, site managers must often operate under excessively conservative and expensive assumptions. This report describes a systematic approach to quantifying the uncertainties surrounding the critical parameters in control decisions (e.g., condition of the tanks, kinds of wastes, types of possible accidents) through the use of expert elicitation methods. The results of the elicitations would then be used to build a decision support system and accident analysis model that would allow managers to see how different control strategies would affect the cost and safety of a facility configuration.

Current designs of the shaft sealing system for the Waste Isolation Pilot Plant (WIPP) propose using bentonite as a primary sealing component. The shaft sealing designs anticipate that compacted bentonite sealing components can perform through the 10,000-year regulatory period and beyond. To evaluate the acceptability of bentonite as a sealing material for the WIPP, this report identifies references that deal with the properties and characteristics of bentonite that may affect its behavior in the WIPP environment. This report reviews published studies that discuss using bentonite as sealing material for nuclear waste disposal, environmental restoration, toxic and chemical waste disposal, landfill liners, and applications in the petroleum industry. This report identifies the physical and chemical properties, stability and seal construction technologies of bentonite seals in shafts, especially in a saline brine environment. This report focuses on permeability, swelling pressure, strength, stiffness, longevity, and densification properties of bentonites.

PROGRAM DROP consists of a series of FORTRAN routine which together are used to model the evaporation of a freely falling, multicomponent drop composed of an arbitrary number of volatile species and a single nonvolatile, inert component. The physics underlying the model are clearly identified, and the model`s relationship to previous work in the literature is described. Test cases are used to illustrate the viability of the model and to highlight its potential usefulness in the accurate prediction of multicomponent droplet vaporization in a variety of applications.

This research project used Pad++, a user interface originally developed by Jim Holland. The objective was to explore the utility of that user interface to large databases of information such as those found on the World Wide Web. A web browser based on Pad++ was developed in the first year of this project The first year results, including the human factors were documented in a video and were presented at a SNL-wide seminar. The second year of this research project focused on applying the results of the first year research. The work in the second year involves using Pad++ as a basis for tools to manage large complicated web sites. Pad++ is ideally suited to this complex activity. A prototype was developed, which presents Web relationships in 3D hyperspace, following research from the Geometry Center at the University of Minnesota. Various human factors studies were completed, which indicate Pad++ web browsers allow users to comprehend 23% faster than when using Netscape.

Containers for the transportation of hazardous and radioactive materials incorporate redwood in impact limiters. Redwood is an excellent energy absorber, but only the most rudimentary information exists on its crush properties. The objectives of the study were to fill the information gap by collecting triaxial load-deformation data for redwood; to use these data to characterize redwood crush, assess current wood failure theories, provide developments toward a complete stress-strain theory for redwood; and to review the literature on strain-rate effects on redwood crush performance. The load-deformation responses of redwood at temperature conditions corresponding to ambient (70{degrees}F), 150{degrees}F, and {minus}20{degrees}F conditions were measured in approximately 100 confined compression tests for crush levels leading to material densification. Data analysis provided a more complete description of redwood crush performance and a basis for assessing proposed general orthotropic stress-strain relationships for redwood. A review of existing literature indicated that strain-rate effects cause at most a 20 percent increase in crush stress parallel to grain.

This report contains the viewgraphs from the proceedings of US/Japan Workshop on High Heat Flux Components and Plasma Surface Interactions for Next Fusion Devices. Some of the general topics covered by this report are: PFC/PSI in tokamak and helical devices; development of high heat flux components; PSIS and plasma facing materials;tritium; and material damage.

Under the sponsorship of the Department of Energy, Office of Utility Technologies, the Battery Analysis and Evaluation Department and the Photovoltaic System Assistance Center of Sandia National Laboratories (SNL) initiated a U.S. industry-wide PV Energy Storage System Survey. Arizona State University (ASU) was contracted by SNL in June 1995 to conduct the survey. The survey included three separate segments tailored to: (a) PV system integrators, (b) battery manufacturers, and (c) PV charge controller manufacturers. The overall purpose of the survey was to: (a) quantify the market for batteries shipped with (or for) PV systems in 1995, (b) quantify the PV market segments by battery type and application for PV batteries, (c) characterize and quantify the charge controllers used in PV systems, (d) characterize the operating environment for energy storage components in PV systems, and (e) estimate the PV battery market for the year 2000. All three segments of the survey were mailed in January 1996. This report discusses the purpose, methodology, results, and conclusions of the survey.

Sandia`s involvement with downhole instrumentation dates from the mid 1970s when work was centered on the development of a high-temperature acoustic borehole televiewer, and the establishment of a list of high- temperature component parts such as resistors, integrated circuits, and sensors. This work evolved into the development of memory logging devices for the US Continental Scientific Drilling Program. These tools were of low cost and very easy to use. Their deployment resulted in scientific advancement in understanding geothermal formations, and a thrust of the current program is to move memory tools from the scientific realm to the commercial environment. The tools developed and utilized in the SB-15 well among other field tests are completely self- contained in that power is obtained from batteries and data are stored in an electronic memory system. Three memory tools form the backbone of the initial Sandia tool suite. Pressure/temperature measurements are necessary for the evaluation of geothermal reservoirs, and they are relatively simple to make. Thus, the initial Sandia program concentrated on such a tool, and it has been successfully used in SB-15. This tool will form the basis for future tools since many engineering principles were proven in its evolution. This pressure/temperature tool combination is very useful in characterizing the geothermal reservoir. Another tool in the Sandia suite measures the natural gamma rays from the formation. This spectral gamma ray tool is useful in defining lithology, paleoflows, and certain clays. SB-15 well logging history and a preliminary interpretation of the data is presented in this report.

Several hybrid and solar-only configurations for molten-salt power towers were evaluated with a simple economic model, appropriate for screening analysis. The solar specific aspects of these plants were highlighted. In general, hybrid power towers were shown to be economically superior to solar-only plants with the same field size. Furthermore, the power-booster hybrid approach was generally preferred over the fuel-saver hybrid approach. Using today`s power tower technology, economic viability for the solar power-boost occurs at fuel costs in the neighborhood of $2.60/MBtu to $4.40/ MBtu (low heating value) depending on whether coal-based or gas-turbine-based technology is being offset. The cost Of CO[sub 2] avoidance was also calculated for solar cases in which the fossil fuel cost was too low for solar to be economically viable. The avoidance costs are competitive with other proposed methods of removing CO[sub 2] from fossil-fired power plants.

This guide provides information on how the National Electrical Code (NEC) applies to photovoltaic systems. The guide is not intended to supplant or replace the NEC; it paraphrases the NEC where it pertains to photovoltaic systems and should be used with the full text of the NEC. Users of this guide should be thoroughly familiar with the NEC and know the engineering principles and hazards associated with electrical and photovoltaic power systems. The information in this guide is the best available at the time of publication and is believed to be technically accurate; it will be updated frequently. Application of this information and results obtained are the responsibility of the user.

Recent experiences with the 10 MW{sub e} Solar Two and the 2.5 MW{sub t} TSA (Technology Program Solar Air Receiver) demonstration plants are reported. The heat transfer fluids used in these solar power towers are molten-nitrate salt and atmospheric air, respectively. Lessons learned and suggested technology improvements for next-generation plants are categorized according to subsystem. The next steps to be taken in the commercialization process for each these new power plant technologies is also presented.

The original DAMP (DAta Manipulation Program) was written by Mark Hedemann of Sandia National Laboratories and used the CA-DISSPLA{trademark} (available from Computer Associates International, Inc., Garden City, NY) graphics package as its engine. It was used to plot, modify, and otherwise manipulate the one-dimensional data waveforms (data vs. time) from a wide variety of accelerators. With the waning of CA-DISSPLA and the increasing popularity of UNIX{reg_sign}-based workstations, a replacement was needed. This package uses the IDL{reg_sign} software, available from Research Systems Incorporated in Boulder, Colorado, as the engine, and creates a set of widgets to manipulate the data in a manner similar to the original DAMP.IDL is currently supported on a wide variety of UNIX platforms such as IBM{reg_sign} workstations, Hewlett Packard workstations, SUN{reg_sign} workstations, Microsoft{reg_sign} Windows{trademark} computers, Macintosh{reg_sign} computers and Digital Equipment Corporation VMS{reg_sign} systems. Thus, xdamp is portable across many platforms. The authors have verified operation, albeit with some minor IDL bugs, on IBM PC computers using Windows, Windows 95 and Windows NT; IBM UNIX platforms; DEC Alpha and VMS systems; HP 9000/700 series workstations; and Macintosh computers, both regular and PowerPC{trademark} versions. Version 2 updates xdamp to require IDL version 4.0.1, adds many enhancements, and fixes a number of bugs.

Guidelines for writing a decision paper are presented. The purpose of the decision paper is to present complex issues in an organized format; it is especially helpful when timeliness is important. The writing style and format of the decision paper are described. The format for a decision paper includes the issue or problem statement, relevant background material, options or alternatives, discussion, recommendation, coordination/endorsement, and record of decision.

This paper presents aspects of DOE`s demonstration of compliance with the EPA regulation of the Waste Isolation Pilot Plant (WIPP). The WIPP, a geologic repository for transuranic (TRU) waste, is located 2150 feet below the ground surface in a bedded salt formation about 20 miles east of Carlsbad, NM. Performance of the WIPP as a repository requires that releases to the accessible environment not exceed the limits of the regulation 40 CFR Part 191(1) either when the WIPP is undisturbed, or if there is intrusion into the repository by drilling. In 1996, the EPA promulgated 40 CFR Part 194(2): the implementing regulation for 40 CFR Part 191. The regulatory subsection addressed here, 40 CFR 194.24(b), directs the DOE to identify and analyze the components and characteristics of the TRU waste that can impact performance of the WIPP repository, and thereby possibly impact waste containment. DOE must also analyze those waste characteristics and components that will not affect repository performance.

Laboratory experiments were conducted to physically investigate the processes governing stimulation fluid displacement from hydraulic fractures. Experiments were performed on two scales: meter-scale in a 1500 cm{sup 2} sand pack and core-scale in a 65 cm{sup 2} API linear conductivity cell. High-resolution light transmission imaging was employed at the meter-scale to visualize and quantify processes governing fluid displacement. For comparison, complimentary tests were performed using an API conductivity cell under ambient test conditions and at elevated closure stress. In these experiments viscous fingering and gravity drainage were identified as the dominant processes governing fluid displacement. Fluid viscosity was found to dictate the relative importance of the competing displacement processes and ultimately determine the residual liquid saturation of the sand pack. The process by which fluid displacement occurs was seen to effect the shape of both the gas and liquid phase relative permeability functions. Knowledge of such viscosity/relative permeability relationships may prove useful in bounding predictions of post-stimulation recovery of gels from the fracture pack.

Six hydraulic-fracture injections into a fluvial sandstone at a depth of 4500 ft were monitored with multi-level triaxial seismic receivers in two wells, resulting in maps of the growth and final geometry of each fracture based upon microseismic activity. These diagnostic images show that the hydraulic fractures are highly contained for smaller-volume KCl-water injections, but height growth is significant for the larger-volume, higher-rate, higher-viscosity treatments. Fracture lengths for most injections are similar. Final results are also compared with fracture models.

Production of gas from the Frontier Formation at 18,300 R depth in the Frewen No. 4 Deep well, eastern Green River basin (Wyoming), was uneconomic despite the presence of numerous open natural fractures. Initial production tested at 500 MCFD, but dropped from 360 MCFD to 140 MCFD during a 10-day production test, and the well was abandoned. Examination of the fractures in the core suggests several probable reasons for this poor production. One factor is the presence of a hydrocarbon residue (carbon) which filled much of the porosity left in the smaller fractures after mineralization. An equally important factor is probably the reorientation of the in situ horizontal compressive stress to a trend normal to the main fractures, and which now acts to close fracture apertures rapidly during reservoir drawdown. This data set has unpleasant implications for the search for similar, deep fractured reservoirs.

This report describes the development and testing of a high-frequency scannerless imaging laser radar system to evaluate its viability as an industrial inspection and measurement sensor. We modified an existing 5.5-Mhz scannerless laser radar to operate at 150 Mhz, and measured its performance including its spatial resolution and range resolution. We also developed new algorithms that allow rapid data reduction with improved range resolution. The resulting 150-Mhz ladar system demonstrated a range resolution of better than 3 mm, which represents nearly a factor-of-100 improvement in range resolution over the existing scannerless laser radar system. Based on this work, we believe that a scannerless range imager with 1- to 2-mm range resolution is feasible. This work was performed as part of a small-business CRADA between Sandia National Laboratories and Perceptron, Inc.

Drill hole USW SD-12 is one of several holes drilled under Site Characterization Plan Study 8.3.1.4.3.1, also known as the {open_quotes}Systematic Drilling Program,{close_quotes} as part of the U.S. Department of Energy characterization program at Yucca Mountain, Nevada, which has been proposed as the potential location of a repository for high-level nuclear waste. The SD-12 drill hole is located in the central part of the potential repository area, immediately to the west of the Main Test Level drift of the Exploratory Studies Facility and slightly south of midway between the North Ramp and planned South Ramp declines. Drill hole USW SD-12 is 2166.3 ft (660.26 m) deep, and the core recovered essentially complete sections of ash-flow tuffs belonging to the lower half of the Tiva Canyon Tuff, the Pah Canyon Tuff, and the Topopah Spring Tuff, all of which are part of the Miocene Paintbrush Group. A virtually complete section of the Calico Hills Formation was also recovered, as was core from the entire Prow Pass Tuff formation of the Crater Flat Group.

Work was done for developing biomimetic oxidation catalysts. Two classes of metalloporphyrin catalysts were studied. The first class of catalysts studied were a novel series of highly substituted metalloporphyrins, the fluorinated iron dodecaphenylporphyrins. These homogeneous metalloporphyrin catalysts were screened for activity as catalysts in the oxidation of hydrocarbons by dioxygen. Results are discussed with respect to catalyst structural features. The second type of catalysts studied were heterogeneous catalysts consisting of metalloporphyrins applied to inorganic supports. Preliminary catalytic testing results with these materials are presented.

Because of the widespread use of digital systems in radars, instrumentation, and communication systems, an understanding of the role played by noise at the input to the analog-to-digital (A/D) converter is important. When digital signal processing is performed on the output of the A/D, it is crucial that the A/D respond linearly to the signal. The noise level at the input of the A/D is a determining factor for the linearity of the system. Many texts discuss the operation and performance of analog-to-digital converters and, although the understanding of the role of noise is not new, it seems that few, if any, discuss noise from the point of view presented here. This omission appears to lead to a misunderstanding of the importance of noise in these analog-to-digital systems. Single- bit and multiple-bit analog-to-digital converters will be analyzed, and it will be shown, that with the appropriate noise level at the input, even the single-bit converter can behave as a linear device. An example will be described whereby a ``feature`` of a particular commercial instrumentation system was based on a misunderstanding of the role of noise, and the use of this ``feature`` caused serious degradation of the system linearity and performance.

This report describes the results of assembly planning research under the LDRD. The assembly planning problem is that of finding a sequence of assembly operations, starting from individual parts, that will result in complete assembly of a device specified as a CAD model. The automated assembly programming problem is that of automatically producing a robot program that will carry out a given assembly sequence. Given solutions to both of these problems, it is possible to automatically program a robot to assemble a mechanical device given as a CAD data file. This report describes the current state of our solutions to both of these problems, and a software system called Archimedes 2 we have constructed to automate these solutions. Because Archimedes 2 can input CAD data in several standard formats, we have been able to test it on a number of industrial assembly models more complex than any before attempted by automated assembly planning systems, some having over 100 parts. A complete path from a CAD model to an automatically generated robot program for assembling the device represented by the CAD model has also been demonstrated.

A goal was set for high density, high performance microelectronics pursued through a dense 3D packing of integrated circuits. A {open_quotes}tool set{close_quotes} of assembly processes have been developed that enable 3D system designs: 3D thermal analysis, silicon electrical through vias, IC thinning, mounting wells in silicon, adhesives for silicon stacking, pretesting of IC chips before commitment to stacks, and bond pad bumping. Validation of these process developments occurred through both Sandia prototypes and subsequent commercial examples.

This document examines a number of different software technologies in the rapidly changing field of database management systems, evaluates these systems in light of the expected needs of the Comprehensive Test Ban Treaty (CTBT) Knowledge Base, and makes some recommendations for the initial prototypes of the Knowledge Base. The Knowledge Base requirements are examined and then used as criteria for evaluation of the database management options. A mock-up of the data expected in the Knowledge Base is used as a basis for examining how four different database technologies deal with the problems of storing and retrieving the data. Based on these requirement and the results of the evaluation, the recommendation is that the Illustra database be considered for the initial prototype of the Knowledge Base. Illustra offers a unique blend of performance, flexibility, and features that will aid in the implementation of the prototype. At the same time, Illustra provides a high level of compatibility with the hardware and software environments present at the US NDC (National Data Center) and the PIDC (Prototype International Data Center).

A range of different ternary refractory nitride compositions have been deposited by CVD (chemical vapor deposition) for the systems TiSiN, WBN, and WSiN. The precursors used are readily available. The structure, electrical, and barrier properties of the films produced by CVD are similar to those observed for films with similar compositions deposited by PVD (physical vapor deposition). The step coverage of the CVD processes developed is good and in some cases, exceptional. A combination of desirable resistivity, step coverage, and barrier properties exists simultaneously over a reasonable range of compositions for each system. Initial attempts to integrate WSiN films into a standard 0.5 micrometer CMOS process flow in place of a sputtered Ti/TiN stack were successful.

The principal purpose of this case study of the Sumikawa Geothermal Field is to document and to evaluate the use of drilling logs, surface and downhole geophysical measurements, chemical analyses, and pressure transient data for the assessment of a high temperature volcanic geothermal field. The work accomplished during Year 1 of this ongoing program is described in the present report. A brief overview of the Sumikawa Geothermal Field is given. The drilling information and downhole pressure, temperature, and spinner surveys are used to determine feedzone locations, pressures and temperatures. Available injection and production data from both slim holes and large-diameter wells are analyzed to evaluate injectivity/productivity indices and to investigate the variation of discharge rate with borehole diameter. Finally, plans for future work are outlined.

Production and injection data from nine slim holes and sixteen large-diameter wells at the Takigami Geothermal Field, Kyushu, Japan were analyzed in order to establish relationships (1) between injectivity and productivity indices, (2) between productivity/injectivity index and borehole diameter, and (3) between discharge capacity of slim holes and large-diameter wells. Results are compared with those from the Oguni and Sumikawa fields. A numerical simulator (WELBOR) was used to model the available discharge rate from Takigami boreholes. The results of numerical modeling indicate that the flow rate of large-diameter geothermal production wells with liquid feedzones can be predicted using data from slim holes. These results also indicate the importance of proper well design.

Planar impact experiments and wave profile measurements provided single and double shock equation of state data to 30 GPa. Both compression wave wave profile structure and release wave data were used to infer time-dependent strength and equation of state properties for soda-lime glass.

A prototype Video Scanning Hartmann Optical Tester (VSHOT) has been developed to characterize the optics of dish-type solar concentrators. VSHOT is a flexible platform that may characterize any large reflector with a focal length over diameter ratio (f{number_sign}) greater than 0. 45, and RMS optical error in the 0. I - I 0 milliradian range. The VSHOT hardware, software, and operation are described. Measurement uncertainty and preliminary test results are discussed. Another potential application being explored for the VSHOT is the quality assurance of slumped-glass automobile windshields. Preliminary test results from a reference optic and a section of a windshield are presented.

The Sandia/SEMATECH Contamination Free Manufacturing Research Center (CFMRC) was founded in 1992 with the goal of providing research and development support to the U.S. semiconductor industry in the area of defect reduction in manufacturing equipment and processes. The program encompasses topics in equipment/process contamination modeling, advanced wafer cleaning, water use reduction, organic contamination, wafer- map defect data analysis and contamination sensor development. The Contamination Sensor development activity focuses on producing advanced tools for the semiconductor industry by development and commercialization of in-line cost-effective sensors for measurement of contaminants in critical process tools. There are three phases to the CFMRC sensor development activities. Initially, efforts focus on sensor feasibility testing whereby several potential sensors are evaluated for technical and business issues such as sensitivity, reproducibility, cost, size, etc. After this initial screening, subsequent refinement of one or more chosen sensors occurs through beta-testing in a manufacturing environment to ensure viability for manufacturing applications. Lastly, commercialization with an existing supplier is critical in ensuring availability of the sensors for the industry. The examples described in this paper cover sensor development at all three stages in this evolutionary process.

Real time temperature measurements have been performed on both GaAs and silicon substrates during wafer processing using a technique based upon diffuse reflectance spectroscopy (DRS). Good temperature resolution ({+-}O.4 {degrees}C) and rapid updates have enabled the process control potential of the device to be demonstrated.

As required in U.S. Department of Energy (DOE) Order 5400.1, an Annual Site Environmental Report (ASER) has been prepared for Sandia National Laboratories/New Mexico (SNL/NM) for 1995. The ASER represents a key component of the DOE`s effort to keep the public informed about environmental efforts and compliance status at SNL/NM. This booklett was prepared by the Environmental Operations Center of SNL/NM and reviewed by Community Relations and Risk Management. Suggestions were incorporated from the students of New Futures High School as a part of the Environmental Education Program. This work is supported by the DOE under Contract DE-AC04-94AL85000. A copy of the ASER can be obtained by calling the Environmental Monitoring and Reporting Department at 848-0927. This pamphlet provides a brief summary of the 1995 SNL/NM environmental programs and monitoring results. Additional copies of this pamphlet may be obtained by calling the number above.

An overview of the surface micromachining program at the Microelectronics Development Laboratory of Sandia National Laboratories is presented. Development efforts are underway for a variety of surface micromachined sensors and actuators for both defense and commercial applications. A technology that embeds micromechanical devices below the surface of the wafer prior to microelectronics fabrication has been developed for integrating microelectronics with surface-micromachined micromechanical devices. The application of chemical-mechanical polishing to increase the manufacturability of micromechanical devices is also presented.

We describe a new method for the scabbling of concrete surfaces using a thin layer of explosive material sprayed onto the surfaces. We also developed a new explosive mixture that could be applied with commercial spray painting equipment. The first part of our record describes experiments that studied methods for the initiation of the sprayed explosive. We successfully initiated layers 0.36 mm thick using a commercial EBW detonator, a flying plate detonator, and by pellet impact. The second part of our report describes a survey of spray methods and tests with two commercial spray systems that we believe could be used for developing a robotic spray system.

The use of dilute SC-1 (NH40H:H202:H20) chemistry cleaning processes for particle removal from silicon surfaces has been investigated. Dilute chemistries can be highly effective, especially when high- frequency acoustic energy (megasonics) is applied. The high particle removal efficacy of the dilute chemistry processes presumably arises due to increased double layer effects caused by reduced ionic strength. Dilute chemistry SC- I solutions exhibit somewhat reduced efficacy for removal of certain light organics; however, when dilute SC-1 is used along with other pre-gate cleaning steps (e.g. HF, SC-2, and piranha), then the overall cleaning sequence is quite effective. In addition to providing robust cleaning processes, dilute chemistries also result in significantly lower chemical and rinse water usage. Waste water treatment requirements are also lessened when dilute chemistry cleaning solutions are employed.

With a goal of producing faster, safer, and cheaper technologies for nuclear waste cleanup, Sandia is actively developing and extending intelligent systems technologies through the US Department of Energy Office of Technology Development (DOE OTD) Robotic Technology Development Program (RTDP). Graphical programming is a key technology for robotic waste cleanup that Sandia is developing for this goal. Graphical programming uses simulation such as TELEGRIP `on-line` to program and control robots. Characterized by its model-based control architecture, integrated simulation, `point-and-click` graphical user interfaces, task and path planning software, and network communications, Sandia`s Graphical Programming systems allow operators to focus on high-level robotic tasks rather than the low-level details. Use of scripted tasks, rather than customized programs minimizes the necessity of recompiling supervisory control systems and enhances flexibility. Rapid world-modelling technologies allow Graphical Programming to be used in dynamic and unpredictable environments including digging and pipe-cutting. This paper describes Sancho, Sandia`s most advanced graphical programming supervisory software. Sancho, now operational on several robot systems, incorporates all of Sandia`s recent advances in supervisory control. Graphical programming uses 3-D graphics models as intuitive operator interfaces to program and control complex robotic systems. The goal of the paper is to help the reader understand how Sandia implements graphical programming systems and which key features in Sancho have proven to be most effective.

Battery testing for photovoltaic (PV) applications is funded at Sandia under the Department of Energy`s (DOE) Photovoltaic Balance of Systems (BOS) Program. The goal of the PV BOS program is to improve PV system component design, operation, reliability, and to reduce overall life-cycle costs. The Sandia battery testing program consists of: (1) PV battery and charge controller market survey, (2) battery performance and life-cycle testing, (3) PV charge controller development, and (4) system field testing. Test results from this work have identified market size and trends, PV battery test procedures, application guidelines, and needed hardware improvements.

Planar, surface micromachined pressure sensors have been fabricated by an extension of the chemical-mechanical polishing (CMP) process. CMP eliminates many of the fabrication problems associated with the photolithography, dry etch, and metallization of non-planar devices. Furthermore, CMP adds additional design flexibility. The sensors are based upon deformable, silicon nitride diaphragms with polysilicon piezoresistors. Absolute pressure is detected by virtue of reference pressure cavities underneath the diaphragms.

Interconnect delays, arising in part from intralevel capacitance, are one of the limiting factors in the performance of advanced integrated circuits. In addition, the problem of filling the spaces between neighboring metal lines with an insulator is becoming increasingly severe as aspect ratios increase. We address these problems by intentionally creating a air gap between closely spaced metal lines. The ends of the air gap and reentrant features are then sealed using a spin on dielectric. The entire structure is then capped with silicon dioxide and planarized . Simple modeling of mechanical test structures on silicon predicts an equivalent dielectric constant of 1.9 on features similar to those expected for 0.25 micron technologies. Metal to metal test structures fabricated in a 0.5 micron CMOS technology show that the process can be readily integrated with chemical mechanical polishing and current standard CMOS processes.

The corrections system in the U.S. is supervising over five million offenders. This number is rising fast and so are the direct and indirect costs to society. To improve supervision and reduce the cost of parole and probation, first generation home arrest systems were introduced in 1987. While these systems proved to be helpful to the corrections system, their scope is rather limited because they only cover an offender at a single location and provide only a partial time coverage. To correct the limitations of first-generation systems, second-generation wide area continuous electronic offender monitoring systems, designed to monitor the offender at all times and locations, are now on the drawing board. These systems use radio frequency location technology to track the position of offenders. The challenge for this technology is the development of reliable personal locator devices that are small, lightweight, with long operational battery life, and indoors/outdoors accuracy of 100 meters or less. At the center of a second-generation system is a database that specifies the offender`s home, workplace, commute, and time the offender should be found in each. The database could also define areas from which the offender is excluded. To test compliance, the system would compare the observed coordinates of the offender with the stored location for a given time interval. Database logfiles will also enable law enforcement to determine if a monitored offender was present at a crime scene and thus include or exclude the offender as a potential suspect.

This paper describes divertor density and temperature measurements using both a new reciprocating Langmuir probe (XPT-RCP) which plunges vertically above the divertor floor up to the X-point height and swept, single, Langmuir probes fixed horizontally across the divertor floor. These types of measurements are important for testing models of the SOL and divertor which then are used to design plasma facing components in reactor size tokamaks. This paper presents an overview of the new divertor probe measurements and how they compare with the new divertor Thomson scattering system. The fast time response of the probe measurements allows detailed study of ELMs.

A new reciprocating Langmuir probe has been used to measure density and temperature profiles, ion flow, and potential fluctuation levels from the lower divertor floor up to the X-point on the DIII-D tokamak. This probe is designed to make fast (2 kHz swept, 20 kHz Mach, 500 kHz Vfloat) measurements with 2 mm spatial resolution in the region where the largest gradients on the plasma open flux tubes are found and therefore provide the best benchmarks for SOL and divertor numerical models. Profiles are constructed using the 300 ms time history of the probe measurements during the 25 cm reciprocating stroke. Both single and double null plasmas can be measured and compared with a 20 Hz divertor Thomson scattering system. The probe head is constructed of four different kinds of graphite to optimize the electrical and thermal characteristics. Electrically insulated pyrolytic graphite rings act as a heat shield to absorb the plasma heat flux on the probe shaft and are mounted on a carbon/carbon composite core for mechanical strength. The Langmuir probe sampling tips are made of a linear carbon fiber composite. The mechanical, electrical, data acquisition and power supply systems design will be described. Initial measurements will also be presented.

This paper addresses the problem of improving detection, assessment, and response capabilities of security systems. Our approach combines two state-of-the-art technologies: volumetric video motion detection (VVMD) and virtual reality (VR). This work capitalizes on the ability of VVMD technology to provide three-dimensional (3D) information about the position, shape, and size of intruders within a protected volume. The 3D information is obtained by fusing motion detection data from multiple video sensors. The second component involves the application of VR technology to display information relating to the sensors and the sensor environment. VR technology enables an operator, or security guard, to be immersed in a 3D graphical representation of the remote site. VVMD data is transmitted from the remote site via ordinary telephone lines. There are several benefits to displaying VVMD information in this way. Because the VVMD system provides 3D information and because the sensor environment is a physical 3D space, it seems natural to display this information in 3D. Also, the 3D graphical representation depicts essential details within and around the protected volume in a natural way for human perception. Sensor information can also be more easily interpreted when the operator can `move` through the virtual environment and explore the relationships between the sensor data, objects and other visual cues present in the virtual environment. By exploiting the powerful ability of humans to understand and interpret 3D information, we expect to improve the means for visualizing and interpreting sensor information, allow a human operator to assess a potential threat more quickly and accurately, and enable a more effective response. This paper will detail both the VVMD and VR technologies and will discuss a prototype system based upon their integration.

While all fires are complex and involve many phenomena, this report is limited to large, turbulent liquid-hydrocarbon pool fires. Large, liquid-hydrocarbon pool fires present a risk in petrochemical storage and processing facilities and transportation systems that contain large amounts of liquid hydrocarbons. This report describes observations, speculations, and numerical simulations of vortical structures in pool fires. Vortical structures are observed in fires with length scales ranging from those that bend millimeter-thick flame zones to those that entrain air many meters from the edge of the fire to its centerline. The authors propose that baroclinic vorticity generation is primarily responsible for production of rotational motion at small scale and that amalgamation is responsible for the production of large-scale rotational structures from the myriad of small-scale structures. Numerical simulations show that vortical structures having time-mean definitions can be resolved with a Reynolds-Average Navier-Stokes (RANS) approach. However, for vortical structures without time-mean definition, RANS is inappropriate, and another technique, such as Large Eddy Simulation (LES), should be employed. 39 refs., 52 figs., 3 tabs.

On September 24, 1996, after decades of discussion and more than two years of intensive international negotiations, President Clinton, followed by representatives of (to date) more than 125 other countries, including the other four declared nuclear weapons states, signed the Comprehensive Test Ban Treaty. Each signatory now faces a complex set of technical and political considerations regarding the advisability of joining the treaty. Those considerations vary from country to country, but for many countries one of the key issues is the extent to which the treaty can be verified. In the case of the US, it is anticipated that treaty verifiability will be an important issue in the US Senate Advice and Consent Hearings. This paper will address treaty verifiability, with an emphasis on the interplay between the various elements of the International monitoring regime, as prescribed in the CTBT Treaty Text and its associated Protocol. These elements, coupled with the National regimes, will serve as an integrated set of overlapping, interlocking measures to support treaty verification. Taken as a whole, they present a formidable challenge to potential testers who wish not to be caught.

This paper argues that cooperative monitoring plays a critical role in the implementation of regional security agreements and confidence building measures. A framework for developing cooperative monitoring options is proposed and several possibilities for relating bilateral and regional monitoring systems to international monitoring systems are discussed. Three bilateral or regional agreements are analyzed briefly to illustrate different possibilities. These examples illustrate that the relationship of regional or bilateral arms control or security agreements to international agreements depends on a number of factors: the overlap of provisions between regional and international agreements; the degree of interest in a regional agreement among the international community; efficiency in implementing the agreement; and numerous political considerations. Given the importance of regional security to the international community, regions should be encouraged to develop their own infrastructure for implementing regional arms control and other security agreements. A regional infrastructure need not preclude participation in an international regime. On the contrary, establishing regional institutions for arms control and nonproliferation could result in more proactive participation of regional parties in developing solutions for regional and international problems, thereby strengthening existing and future international regimes. Possible first steps for strengthening regional infrastructures are identified and potential technical requirements are discussed.

Lead acetate [Pb(O{sub 2}CMe){sub 4}] was easily synthesized from a warm solution of Pb{sub 3}O{sub 4}, HO{sub 2}CMe and O(OCMe){sub 2} following literature preparations when the appropriate measures to minimize water contamination were followed. Furthermore, Pb(O{sub 2}CMe){sub 4} which has been decomposed (evidenced by the appearance of a purple color due to oxidation) can be regenerated using a similar preparatory route. Introduction of Pb(O{sub 2}CMe){sub 4} from the two routes outlined above into the IMO process for production of PZT thin films gave films with comparable ferroelectric properties to commercially available Pb(O{sub 2}CMe){sub 4} precursors. However, the freshly synthesized material yields PZT films with better properties compared to the recycled material.

Laboratory-scale experiments applicable to the use of salt-saturated concrete as a seal material for a transuranic waste repository have been completed. Nitrogen gas permeability measurements were made using a flexible-wall permeameter, a confining pressure of 1 MPa, and gas pressure gradients ranging from 0.3 MPa to 0.75 MPa. Results show that salt-saturated concrete has very low intrinsic permeability with values ranging from 9.4 {times} 10{sup {minus}22} m{sup 2} to 9.7 {times} 10{sup {minus}17} m{sup 2}. Strength and deformation characteristics were investigated under conditions of triaxial compression with confining pressures ranging from 0 to 15 MPa using either axial strain-rate or axial stress-rate control and show that the failure strength of concrete increases with confining pressure which can be adequately described through pressure-sensitive failure criteria. Axial, radial, and volumetric strains were also measured during each test and these data were used to determine elastic properties. Experimental results are applicable in the design and analysis of scale-related functions and apply to other concrete structures subjected to compressive loadings such as dams and prestressed structural members.

Alignment of DNA sequences is a necessary step prior to comparison of sequence data. High-speed alignment is needed due to the large size of DNA databases. Correlation, a standard pattern recognition technique, can be used to perform alignment. Correlation can be performed rapidly using optical techniques. Thus, optical correlation offers the potential for high-speed processing of DNA sequence data. This report describes research efforts to apply one-dimensional acousto-optical correlation methods to the problem of DNA sequence alignment. Experimental results are presented.

The Intelligent Systems and Robotics Center (ISRC) at Sandia National Laboratories is a multi-program organization, pursuing research, development and applications in a wide range of field. Activities range from large-scale applications such as nuclear facility dismantlement for the US Department of Energy (DOE), to aircraft inspection and refurbishment, to automated script and program generation for robotic manufacturing and assembly, to miniature robotic devices and sensors for remote sensing and micro-surgery. This paper describes six activities in the large and small scale that are underway and either nearing technology transfer stage or seeking industrial partners to continue application development. The topics of the applications include multiple arm coordination for intuitively maneuvering large, ungainly work pieces; simulation, analysis and graphical training capability for CP-5 research reactor dismantlement; miniature robots with volumes of 16 cubic centimeters and less developed for inspection and sensor deployment; and biomedical sensors to enhance automated prosthetic device production and fill laparoscopic surgery information gap.

A new gravitational head formulation for the treatment of stratified conditions has been developed for CONTAIN 1.2, a control volume code used primarily for the analyses of postulated accidents in nuclear power plants. The new CONTAIN formulation of gravitational heads, termed the hybrid formulation, is described. This method of calculating stratified conditions is compared with the old, average-density formulation used in code versions prior to CONTAIN 1.2. Both formulations are assessed in this report with experimental data from three large-scale experiments in which stratified conditions formed by injection of a buoyant gas were observed. In general, the hybrid formulation gives a substantially higher degree of stratification than the old formulation. For stable, fully developed stratifications, the hybrid formulation also gives much better agreement with the measured degree of stratification than the old formulation. In addition, the predicted degree of stratification is robust and not sensitive to nodalization, provided a set of nodalization guidelines are followed. However, for stratification behavior controlled by special physics not modeled in CONTAIN, such as momentum convection, plume entrainment, or bulk molecular diffusion, one should not expect good agreement with experiment unless special measures to accommodate the missing physics are taken.

Interest in the transmission of high intensities through optical fibers is being motivated by an increasing number of applications. Using different laser types and fiber materials, various studies are encountering transmission limitations due to laser-induced damage processes. The authors have found that fiber transmission is often limited by a plasma-forming breakdown occurring at the fiber entrance face. System attributes that will affect breakdown and damage thresholds include laser characteristics, the design and alignment of laser-to-fiber injection optics, and fiber end-face preparation. In the present work the authors have combined insights gained in past studies in order to establish what thresholds can be achieved if all system attributes can be optimized to some degree. The multimode laser utilized past modifications that produced a relatively smooth, quasi-Gaussian profile. The laser-to-fiber injection system achieved a relatively low value for the ratio of peak-to-average fluences at the fiber entrance face, incorporated a mode scrambler to generate a broad mode power distribution within the initial segment of the fiber path, and had improved fixturing to insure that the fiber axis was collinear with the incident laser beam. Fiber end faces were prepared by a careful mechanical polishing schedule followed by surface conditioning using a CO{sub 2} laser. In combination, these factors resulted in higher thresholds for breakdown and damage than they had achieved previously in studies that utilized a simple lens injection system.

Fast and thermal neutron activation analysis with sealed neutron generators has been used to detect oil (oil logging), hazardous waste, fissile material, explosives, and contraband (drugs). Sealed neutron generators, used in the above applications, must be small and portable, have good electrical efficiency and long life. The ion sources used in the sealed neutron tubes require high gas utilization efficiencies or low pressure operation with high ionization efficiencies. In this paper, the authors compare a number of gas ion sources that can be used in sealed neutron tubes. The characteristics of the most popular ion source, the axial Penning discharge will be discussed as part of the zetatron neutron generator. Other sources to be discussed include the SAMIS source and RF ion source.

This report summarizes work performed by Sandia National Laboratories for the Federal Aviation Administration. The technical issues involved in fire modeling for aircraft fire research are identified, as well as computational fire tools for addressing those issues, and the research which is needed to advance those tools in order to address long-range needs. Fire field models are briefly reviewed, and the VULCAN model is selected for further evaluation. Calculations are performed with VULCAN to demonstrate its applicability to aircraft fire problems, and also to gain insight into the complex problem of fires involving aircraft. Simulations are conducted to investigate the influence of fire on an aircraft in a cross-wind. The interaction of the fuselage, wind, fire, and ground plane is investigated. Calculations are also performed utilizing a large eddy simulation (LES) capability to describe the large- scale turbulence instead of the more common k-{epsilon} turbulence model. Additional simulations are performed to investigate the static pressure and velocity distributions around a fuselage in a cross-wind, with and without fire. The results of these simulations provide qualitative insight into the complex interaction of a fuselage, fire, wind, and ground plane. Reasonable quantitative agreement is obtained in the few cases for which data or other modeling results exist Finally, VULCAN is used to quantify the impact of simplifying assumptions inherent in a risk assessment compatible fire model developed for open pool fire environments. The assumptions are seen to be of minor importance for the particular problem analyzed. This work demonstrates the utility of using a fire field model for assessing the limitations of simplified fire models. In conclusion, the application of computational fire modeling tools herein provides both qualitative and quantitative insights into the complex problem of aircraft in fires.

A sodium silicotitanate (TAM5) of ideal composition Na{sub 3}Si{sub 2}Ti{sub 4}O{sub 13}(OH) {center_dot} 4H{sub 2}O (jointly developed by Sandia and Texas A and M) is synthesized hydrothermally in highly alkaline media. The material selectively removes cesium cations from solutions containing up to 5.7 M Na{sup +} and for a pH range of less than 1 to greater than 14. The crystal structure of TAM5 has been refined from X-ray powder data by Rietveld refinement, using the mineral Sitinakite as a model. The compound is tetragonal. The titanium and niobium atoms occur in clusters of four and are octahedrally coordinated by oxygen atoms. These clusters are held together by tetrahedral linkages to the silicon atoms. The framework forms a three dimensional structure that has potential accessibility to the three cation sites (two in the cages, one in the framework wall) from three directions. However, the sodium cation that sits in the wall is tightly held due to octahedral bonding from a combination of framework and water oxygen atoms. Furthermore, that site is too small for cations greater in size than sodium. In a concurrent report, extensive monovalent and divalent cation exchange studies are presented, with analyses including structure refinement, elemental analyses and thermal stability of both powder and UOP engineered forms.

The conceptual model for WIPP dissolved concentrations is a description of the complex natural and artificial chemical conditions expected to influence dissolved actinide concentrations in the repository. By a set of physical and chemical assumptions regarding chemical kinetics, sorption substrates, and waste-brine interactions, the system was simplified to be amenable to mathematical description. The analysis indicated that an equilibrium thermodynamic model for describing actinide solubilities in brines would be tractable and scientifically supportable. This paper summarizes the conceptualization and modeling approach and the computational results as used in the WIPP application for certification of compliance with relevant regulations for nuclear waste repositories. The WIPP site contains complex natural brines ranging from sea water to 10x more concentrated than sea water. Data bases for predicting solubility of Am(III) (as well as Pu(III) and Nd(III)), Th(IV), and Np(V) in these brines under potential repository conditions have been developed, focusing on chemical interactions with Na, K, Mg, Cl, SO{sub 4}, and CO{sub 3} ions, and the organic acid anions acetate, citrate, EDTA, and oxalate. The laboratory and modeling effort augmented the Harvie et al. parameterization of the Pitzer activity coefficient model so that it could be applied to the actinides and oxidation states important to the WIPP system.

Recently, there has been an interest in making electronic cash protocols more practical for electronic commerce by developing e-cash which is divisible (e.g., a coin which can be spent incrementally but total purchases are limited to the monetary value of the coin). In Crypto`95, T. Okamoto presented the first practical divisible, untraceable, off-line e-cash scheme, which requires only O(log N) computations for each of the withdrawal, payment and deposit procedures, where N = (total coin value)/(smallest divisible unit). However, Okamoto`s set-up procedure is quite inefficient (on the order of 4,000 multi-exponentiations and depending on the size of the RSA modulus). The authors formalize the notion of range-bounded commitment, originally used in Okamoto`s account establishment protocol, and present a very efficient instantiation which allows one to construct the first truly efficient divisible e-cash system. The scheme only requires the equivalent of one (1) exponentiation for set-up, less than 2 exponentiations for withdrawal and around 20 for payment, while the size of the coin remains about 300 Bytes. Hence, the withdrawal protocol is 3 orders of magnitude faster than Okamoto`s, while the rest of the system remains equally efficient, allowing for implementation in smart-cards. Similar to Okamoto`s, the scheme is based on proofs whose cryptographic security assumptions are theoretically clarified.

This report describes the system designed and fabricated for the National Center for Advanced Information Component Manufacturing (NCAICM) project number 9322-135. The system is a device capable of simultaneously aligning two glass plates and sealing them together with glass frit. The process development was divided into two phases. The first was thermal sealing in an ambient environment. The second was sealing a controlled environment in a vacuum.

Quality of life as a concept has been used in many ways in the public policy arena. It can be used in summative evaluations to assess the impacts of policies or programs. Alternatively, it can be applied to formative evaluations to provide input to the formation of new policies. In short, it provides the context for the understanding needed to evaluate the results of choices that have been made in the public policy arena, or the potential of choices yet to be made. In either case, the public policy question revolves around the positive or negative impact the choice will have on quality of life, and the magnitude of that impact. This discussion will develop a conceptual framework that proposes that an assessment of quality of life is based on a comparison of expectations with experience. The framework defines four basic components from which these expectations arise: natural conditions, social conditions, the body, and the mind. Each one of these components is generally described, and associated with a general policy or rhetorical category which gives it its policy vocabulary--environmental quality, economic well-being, human health, and self-fulfillment.

Time-domain simulations of the loads on wind energy conversion systems have been hampered in the past by the relatively long computational times for nonlinear structural analysis codes. However, recent advances in both the level of sophistication and computational efficiency of available computer hardware and the codes themselves now permit long-term simulations to be conducted in reasonable times. Thus, these codes provide a unique capability to evaluate the spectral content of the fatigue loads on a turbine. To demonstrate these capabilities, a Micon 65/13 turbine is analyzed using the YawDyn and the ADAMS dynamic analysis codes. The SNLWIND-3D simulator and measured boundary conditions are used to simulate the inflow environment that can be expected during a single, 24-hour period by a turbine residing in Row 41 of a wind farm located in San Gorgonio Pass, California. Also, long-term simulations (up to 8 hours of simulated time) with constant average inflow velocities are used to better define the characteristics of the fatigue load on the turbine. Damage calculations, using the LIFE2 fatigue analysis code and the MSU/DOE fatigue data base for composite materials, are then used to determine minimum simulation times for consistent estimates of service lifetimes.

In an effort to devise a cost efficient technology for remediation of uranium contaminated groundwater, the Department of Energy`s Uranium Mill Tailings Remedial Action (DOE-UMTRA) Program through Sandia National Laboratories (SNL) fabricated a pilot scale research project utilizing reactive subsurface barriers at an UMTRA site in Durango, Colorado. A reactive subsurface barrier is produced by placing a reactant material (in this experiment, metallic iron) in the flow path of the contaminated groundwater. The reactive media then removes and/or transforms the contaminant(s) to regulatory acceptable levels. Experimental design and results are discussed with regard to other potential applications of reactive barrier remediation strategies at other sites with contaminated groundwater problems.

Ceramic samples of (La{sub 1-x}Gd{sub x}){sub 2/3}Ca{sub 1/3}MnO{sub 3} were prepared and used as targets to grow films onto LaAlO{sub 3} substrates by pulsed laser deposition. Electrical resistance and thermopower, measured vs temperature and applied magnetic fields indicate transport dominated by positive small polarons in the high temperature paramagnetic state. The Hall effect was measured in 0.5 {mu}m thick films of composition x=0 and x=0.25. No evidence for extraordinary hall effect was found in the paramagnetic regime. Instead, the magnitude of the Hall coefficient decreases exponentially with temperature. This behavior and its anomalous negative sign are interpreted to result from face-diagonal hopping of small polarons in the Mn sublattice.

Prosperity Games{trademark} are an outgrowth and adaptation of move/countermove and seminar War Games, Prosperity Games{trademark} are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education, and research. These issues can be examined from a variety of perspectives ranging from global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions specific industries. All Prosperity Games{trademark} are unique in that both the game format and the player contributions vary from game to game. This report documents the Future{at}Labs.Prosperity Game{trademark} conducted under the sponsorship of the Industry Advisory Boards of the national labs, the national labs, Lockheed Martin Corporation, and the University of California. Players were drawn from all stakeholders involved including government, industry, labs, and academia. The primary objectives of this game were to: (1) explore ways to optimize the role of the multidisciplinary labs in serving national missions and needs; (2) explore ways to increase collaboration and partnerships among government, laboratories, universities, and industry; and (3) create a network of partnership champions to promote findings and policy options. The deliberations and recommendations of these players provided valuable insights as to the views of this diverse group of decision makers concerning the future of the labs.

No abstract available.

A procedure is presented for developing the route characterization used to assess the risk for the highway transport of nuclear materials. The types of data needed for a risk assessment and the sources used to provide that data are discussed. An outline of the methods used to get from data source to the route characterization used for risk analysis is presented. The models and methodologies developed for this study were programmed into the ADROIT computer code, which ha become one of Sandia`s principal analysis tools for doing risk assessments for the highway transportation risk for nuclear materials.

Sandia National Laboratories operates two reactors which fall under US Environmental Protection Agency regulations for emission of radionuclides to the ambient air. These reactors are: (1) the Annular Core Research Reactor, a pool-type reactor and (2) the Sandia Pulsed Reactor III, a Godiva-type reactor. The annual radioactive air emissions from these two reactors had been estimated based on engineering calculations and used in the facility Safety Analysis Report. The calculated release rates had never been confirmed through measurements. The purpose of this work was to obtain confirmatory radioactive gas and aerosol concentration measurements for radionuclides in exhaust stacks of these reactors during normal operation; however, the measured production rate of argon-41 was significantly different from the engineering calculations for both reactors. The resolution of this difference is discussed.

SC-1 (NH{sub 4}OH/H{sub 2}O{sub 2}/H{sub 2}O) and piranha (H{sub 2}SO{sub 4}/H{sub 2}O{sub 2}) cleans have been used for many years to remove particulate and organic contamination. Although the SC-1 clean, often used with applied megasonic power, is known to be highly effective for particle removal, the removal mechanism remains unclear. For the removal of heavy organic contamination, the piranha cleaning chemistry is an effective process; however, post-piranha residue adheres tenaciously to the wafer surface, causing a particle growth phenomenon. A series of experiments have been performed to help understand the interaction of these processes with silicon surfaces.

As device critical dimensions decrease in size it becomes increasingly important to remove particles from the wafer surface so they do not impact device yield. A typical method to evaluate various cleaning techniques is to deposit silicon nitride (Si{sub 3}N{sub 4}) particles on the wafer surface and then process the wafers through the desired cleaning processes. The National Technology Roadmap for Semiconductors specifies the standard challenge for percent particle removal from silicon wafers to be based on > 1,000 nitride particles added to the wafers. However, it does not specify the deposition technique to be used for the Si{sub 3}N{sub 4} particles. Two common methods used to deposit Si{sub 3}N{sub 4} on silicon test wafers are the aerosol deposition technique or the wet dip deposition technique. A comparison between these two Si{sub 3}N{sub 4} deposition methods to determine if these methods create an equivalent particle removal challenge has not been reported in the literature to date. In this paper the authors compare these two deposition techniques. They found advantages and disadvantages for both deposition methods. The preferred method for particle deposition is dependent on the specific application.

The suitability of various metallic printed wiring board surface finishes was assessed for new technology applications that incorporate assembly with Lead-free solders. The manufacture of a lead-free product necessitates elimination of lead (Pb) from the solder, the circuit board as well as the component lead termination. It is critical however for the selected interconnect Pb-free solder and the corresponding printed wiring board (PWB) and component lead finishes to be mutually compatible. Baseline compatibility of select Pb-free solders with Pb containing PWB surface finish and components was assessed. This was followed by examining the compatibility of the commercially available CASTIN{trademark} (SnAgCuSb) Pb-free solder with a series of PWB metallic finishes: Ni/Au, Ni/Pd, and Pd/Cu. The compatibility was assessed with respect to assembly performance, solder joint integrity and long term attachment reliability. Solder joint integrity and mechanical behavior of representative 50 mil pitch 20I/O SOICs was determined before and after thermal stress. Mechanical pull test studies demonstrated that the strength of SnAgCuSb solder interconnections is notably greater than that of SnPb interconnections.

Pulsed high-energy ion beams have been used to thermally treat Ti and Ti alloy surfaces to alter the electrochemical response. Two regimes have been explored: rapid melt and resolidification, and ion beam mixing. In this report, results from initial studies are presented exploring effect of these two regimes on the electrochemical behavior of Ti and Ti alloys.

Recently, a great deal of interest has developed in manufacturing processes that allow the monolithic integration of MicroElectroMechanical Systems (MEMS) with driving, controlling, and signal processing electronics. This integration promises to improve the performance of micromechanical devices as well as lower the cost of manufacturing, packaging, and instrumenting these devices by combining the micromechanical devices with a electronic devices in the same manufacturing and packaging process. In order to maintain modularity and overcome some of the manufacturing challenges of the CMOS-first approach to integration, we have developed a MEMS-first process. This process places the micromechanical devices in a shallow trench, planarizes the wafer, and seals the micromechanical devices in the trench. Then, a high-temperature anneal is performed after the devices are embedded in the trench prior to microelectronics processing. This anneal stress-relieves the micromechanical polysilicon and ensures that the subsequent thermal processing associated with fabrication of the microelectronic processing does not adversely affect the mechanical properties of the polysilicon structures. These wafers with the completed, planarized micromechanical devices are then used as starting material for conventional CMOS processes. The circuit yield for the process has exceeded 98%. A description of the integration technology, the refinements to the technology, and wafer-scale parametric measurements of device characteristics is presented. Additionally, the performance of integrated sensing devices built using this technology is presented.

New, previously unpublished shock wave data on soda-lime glass are presented. These data are examined in light of recent experimental evidence for failure wave behavior in brittle solids. An underlying physical basis for failure waves is explored in terms of inelastic deformation kinetics processes.

An ultrasonic inspection method was developed at FAA`s Airworthiness Assurance NDI Validation Center (AANC) to easily and rapidly detect hidden fatigue cracks in the copilot vertical windshield post on USCG (Coast Guard) HU-25 `Guardian` aircraft. The inspection procedure locates hidden cracks as small as 3.2 mm emanating from internal fastener holes and determines their length. A test procedure was developed and a baseline assessment of the USCG fleet conducted. Inspection results on 41 aircraft revealed good correlation with results made during subsequent structural disassembly and visual inspection of selected aircraft.

The US-Russian Government-to-Government Program of Cooperation on Nuclear Material Protection, Control, and Accounting (MPC&A) evolved from the Nunn-Lugar Cooperative Threat Reduction Program. In 1995, the US Department of Energy (DOE) assumed responsibility as the executive agent for implementation of the Government-to-Government MPC&A Program, followed by the programmatic responsibility for funding. The Russian Program initially emphasized limited exchanges, demonstrations, and upgrades at low-enriched uranium (LEU) fuel fabrication facility at Elektrostal in 1994. The program has expanded to include upgrades at nuclear facilities across Russia, development of the Russian Methodological Training Center (RMTC) in Obninsk; and cooperation with Gosatomnadzor, the Russian Federal Nuclear Radiation and Safety Authority. This paper describes the overall program including program objectives, approach, and US-Russian participation, with an emphasis on DOE-GAN cooperation.

The rapid advancement of interconnect technology has resulted in a more engineered approach to designing and fabricating printed wiring board (PWB) surface features. Recent research at Sandia National Laboratories has demonstrated the importance of surface roughness on solder flow. This paper describes how chemical etching was used to enhance the solderability of surfaces that were normally difficult to wet. The effects of circuit geometry, etch concentration, and etching time on solder flow are discussed. Surface roughness and solder flow data are presented. The results clearly demonstrate the importance of surface roughness on the solderability of fine PWB surface mount features.

Material removal in chemical mechanical polishing (CMP) occurs by a pressure accentuated chemical attack of the surface. The polishing slurry typically consists of abrasive particles and reactive chemicals that may or may not include an oxidant. Post-CMP cleaning processes must remove both the ionic contaminants and any remaining polishing slurry particles. Central to the effectiveness of a clean is the use of conditions that will minimize the binding force between the residual particles and the wafer surface. The morphology and composition of the particle, the surface from which it must be removed, and the environment surrounding the wafer will determine the magnitude of forces that hold a particle to the wafer surface. At the Sandia/SEMATECH Center for Contamination Free Manufacturing, two techniques--atomic force microscopy (AFM) and electrokinetic deposition--are being used to explore these interactions for CMP of both oxide and tungsten surfaces. A basic understanding of particle-surface interaction forces and how they are affected by the chemical/physical environment of the particle and surface is the objective of this task. Modification of the binding forces between particles and wafer surfaces may be used to maximize post-CMP cleaning effectiveness.

A new test simulation tool is being developed to support vibration test design and to evaluate the overall testability of a component or system. This environment, the Vibration Virtual Environment for Test Optimization (VETO), is utilized to optimally place vibration control and response transducers and to investigate the selection of test parameters needed in the design and performance of a vibration experiment. The engineer can investigate the effects of different control parameters prior to performing an actual vibration test. Additionally, new and existing fixture designs can be evaluated through the development of analytical or experimental models that can be integrated into the simulation environment. This test design environment also provides the engineer with the ability to combine analytically or experimentally derived models of the vibration test hardware, instrumentation and equipment into a simulation model that represents the vibration testing capability. Hardware-in-the-loop simulations can be conducted using this model to examine multiple facets of the test design. This paper presents a new tool that will assist test engineers in maximizing the value of vibration tests through the use of hardware-in-the-loop simulations.

Experiments were performed to assess the aging degradation and loss-of-coolant accident (LOCA) behavior of electrical cables subjected to long-term aging exposures. Four different cable types were tested in both the U.S. and France: (1) U.S. 2 conductor with ethylene propylene rubber (EPR) insulation and a Hypalon jacket. (2) U.S. 3 conductor with cross-linked polyethylene (XLPE) insulation and a Hypalon jacket. (3) French 3 conductor with EPR insulation and a Hypalon jacket. (4) French coaxial with polyethylene (PE) insulation and a PE jacket. The data represent up to 5 years of simultaneous aging where the cables were exposed to identical aging radiation doses at either 40{degrees}C or 70{degrees}C; however, the dose rate used for the aging irradiation was varied over a wide range (2-100 Gy/hr). Aging was followed by exposure to simulated French LOCA conditions. Several mechanical, electrical, and physical-chemical condition monitoring techniques were used to investigate the degradation behavior of the cables. All the cables, except for the French PE cable, performed acceptably during the aging and LOCA simulations. In general, cable degradation at a given dose was highest for the lowest dose rate, and the amount of degradation decreased as the dose rate was increased.

The Korean peninsula is the site of a tense military confrontation. Relations between North and South Korea improved during the early 1990`s but the process is now frozen. Confidence building measures, particularly military ones, that address the security needs of both countries would decrease the danger of conflict and help create an environment for direct negotiations. The Korean Institute for Defense Analysis (KIDA) analyzed current security conditions and options. Their scenario includes a conceptual agreement to establish Limited Force Deployment Zones (LDZ) along the current demilitarized zone (DMZ) to increase mutual security. The Cooperative Monitoring Center (CMC) of Sandia National Laboratories, in collaboration with KIDA, developed a strategy, with examples, for cooperatively monitoring the agreement. A cooperative monitoring regime requires consideration of the agreement`s terms, the geographic, logistic, military, and political factors of the Korean environment, and the capability of technology to monitor the terms. This paper assesses the applicability of cooperative monitoring to Korea, describes the monitoring strategy for the Korean enhanced DMZ scenario, and describes the applicable technologies and procedures.

We present growth and characterization of visible and near-infrared vertical-cavity surface emitting lasers (VCSELs) grown by metalorganic vapor phase epitaxy. Discussions on the growth issue of VCSEL materials include growth rate and composition control using an {ital in}{ital situ} normal-incidence reflectometer, comprehensive p- and n-type doping study in AlGaAs by CCl{sub 4} and Si{sub 2}H{sub 6} over the entire composition range, and optimization of ultra-high material uniformity. We also demonstrate our recent achievements of all-AlGaAs VCSELs which include the first room-temperature continuous- wave demonstration of 700-nm red VCSELs and high-efficiency and low- threshold voltage 850-nm VCSELs.

The DOE/DOD Environmental Data Bank was established in 1959 as a central location for storing weapons and equipment environments information from a variety of DOE, DoD, and industrial sources and continues to be maintained by Sandia National Laboratories. The Data Bank contains approximately 3,000 documents regarding normal and abnormal environments that describe handling, storage, transportation, use, and general phases, which occur during the life of a system. This paper describes the DOE/DOD Environmental Data Bank system, its structure, data sources, usage, and progress in converting it from a microfilm database to an electronic database.

It is common practice in applied mechanics to develop mathematical models for mechanical system behavior. Frequently, the actual physical system being modeled is also available for testing, and sometimes the test data are used to help identify the parameters of the mathematical model. However, no general-purpose technique exists for formally, statistically judging the quality of a model. This paper suggests a formal statistical procedure for the validation of mathematical models of physical systems when data taken during operation of the physical system are available. The statistical validation procedure is based on the bootstrap, and it seeks to build a framework where a statistical test of hypothesis can be run to determine whether or not a mathematical model is an acceptable model of a physical system with regard to user-specified measures of system behavior. The approach to model validation developed in this study uses experimental data to estimate the marginal and joint confidence intervals of statistics of interest of the physical system. These same measures of behavior are estimated for the mathematical model. The statistics of interest from the mathematical model are located relative to the confidence intervals for the statistics obtained from the experimental data. These relative locations are used to judge the accuracy of the mathematical model. A numerical example is presented to demonstrate the application of the technique.

A comparison is provided of the results of various methods for evaluating structure during a ship-to-ship collision. The baseline vessel utilized in the analyses is a 67.4 meter in length displacement hull struck by an identical vessel traveling at speeds ranging from 10 to 30 knots. The structural response of the struck vessel and motion of both the struck and striking vessels are assessed by finite element analysis. These same results are then compared to predictions utilizing the {open_quotes}Tanker Structural Analysis for Minor Collisions{close_quotes} (TSAMC) Method, the Minorsky Method, the Haywood Collision Process, and comparison to full-scale tests. Consideration is given to the nature of structural deformation, absorbed energy, penetration, rigid body motion, and virtual mass affecting the hydrodynamic response. Insights are provided with regard to the calibration of the finite element model which was achievable through utilizing the more empirical analyses and the extent to which the finite element analysis is able to simulate the entire collision event. 7 refs., 8 figs., 4 tabs.