Publications

Results 80601–80800 of 99,299

Search results

Jump to search filters

Anatomy of a SAR impulse response

Doerry, Armin W.

A principal measure of Synthetic Aperture Radar (SAR) image quality is the manifestation in the SAR image of a spatial impulse, that is, the SAR's Impulse Response (IPR). IPR requirements direct certain design decisions in a SAR. Anomalies in the IPR can point to specific anomalous behavior in the radar's hardware and/or software.

More Details
TYPE SAND Report YEAR 2007
DOIOSTI

Updated laser safety & hazard analysis for the ARES laser system based on the 2007 ANSI Z136.1 standard

Augustoni, Arnold L.

A laser safety and hazard analysis was performed for the temperature stabilized Big Sky Laser Technology (BSLT) laser central to the ARES system based on the 2007 version of the American National Standards Institutes (ANSI) Standard Z136.1, for Safe Use of Lasers and the 2005 version of the ANSI Standard Z136.6, for Safe Use of Lasers Outdoors. The ARES laser system is a Van/Truck based mobile platform, which is used to perform laser interaction experiments and tests at various national test sites.

More Details
TYPE SAND Report YEAR 2007
DOIOSTI

Arsenic Pilot Plant Operation and Results- Socorro Springs, New Mexico- Phase 1

Dwyer, Brian P.; Everett, Randy; Holub Jr., William E.; Kottenstette, Richard J.; Wright, Jerome L.; Cappelle, Malynda A.

Sandia National Laboratories (SNL) is conducting pilot scale evaluations of the performance and cost of innovative water treatment technologies aimed at meeting the recently revised arsenic maximum contaminant level (MCL) for drinking water. The standard of 10 μg/L (10 ppb) is effective as of January 2006. The first pilot tests have been conducted in New Mexico where over 90 sites that exceed the new MCL have been identified by the New Mexico Environment Department. The pilot test described in this report was conducted in Socorro New Mexico between January 2005 and July 2005. The pilot demonstration is a project of the Arsenic Water Technology Partnership program, a partnership between the American Water Works Association Research Foundation (AwwaRF), SNL and WERC (A Consortium for Environmental Education and Technology Development). The Sandia National Laboratories pilot demonstration at the Socorro Springs site obtained arsenic removal performance data for five different adsorptive media under constant ambient flow conditions. Well water at Socorro Springs has approximately 42 ppb arsenic in the oxidized (arsenate - As(V)) redox state with moderate amounts of silica, low concentrations of iron and manganese and a slightly alkaline pH (8). The study provides estimates of the capacity (bed volumes until breakthrough at 10 ppb arsenic) of adsorptive media in the same chlorinated water. Near the end of the test the feedwater pH was lowered to assess the affect on bed capacity and as a prelude to a controlled pH study (Socorro Springs Phase 2).

More Details
TYPE SAND Report YEAR 2007
DOIOSTI

Microenergetics : combustion and detonation at sub-millimeter scales

Tappan, Alexander S.

At Sandia National Laboratories, we have coined the term 'microenergetics' to describe sub-millimeter energetic material studies aimed at gaining knowledge of combustion and detonation behavior at the mesoscale. Our approach is to apply technologies developed by the microelectronics industry to fabricate test samples with well-defined geometries. Substrates have been fabricated from materials such as silicon and ceramics, with channels to contain the energetic material. Energetic materials have been loaded into the channels, either as powders, femtosecond laser-micromachined pellets, or as vapor-deposited films. Ignition of the samples has been achieved by simple hotwires, integrated semiconductor bridges, and also by lasers. Additionally, grain-scale patterning has been performed on explosive films using both oxygen plasma etching and femtosecond laser micromachining. We have demonstrated simple work functions in microenergetic devices, such as piston motion, which is also a relevant diagnostic to examine combustion properties. Detonation has been achieved in deposited explosive films, recorded by high-speed photography. A review of progress on manufacturing and testing will be presented, as well as historical perspectives and future directions.

More Details
TYPE Conference YEAR 2007
OSTI

Spectrum Imaging Approaches for Bioforensics

Sandia journal manuscript; Not yet accepted for publication

Ohlhausen, J.A.; Kotula, Paul G.; Michael, Joseph R.

Spectrum imaging combined with multivariate statistics is an approach to microanalysis that makes the maximum use of the large amount of data potentially collected in forensics analysis. Here, this study examines the efficacy of using spectrum imaging-enabled microscopies to identify chemical signatures in simulated bioagent materials. This approach allowed for the ready discrimination between all samples in the test. In particular, the spectrum imaging approach allowed for the identification of particles with trace elements that would have been missed with a more traditional approach to forensic microanalysis. Finally, the importance of combining signals from multiple length scales and analytical sensitivities is discussed.

More Details
TYPE Journal Article YEAR 2007
OSTI

Product acceptance environmental and destructive testing for reliability

Collins, Elmer W.; Kerschen, Thomas J.; Dvorack, Michael A.

To determine whether a component is meeting its reliability requirement during production, acceptance sampling is employed in which selected units coming off the production line are subjected to additional environmental and/or destructive tests that are within the normal environment space to which the component is expected to be exposed throughout its life in the Stockpile. This report describes what these tests are and how they are scored for reliability purposes. The roles of screens, Engineering Use Only tests, and next assembly product acceptance testing are also discussed, along with both the advantages and disadvantages of environmental and destructive testing.

More Details
TYPE SAND Report YEAR 2007
DOIOSTI

Making the giant leap with augmented cognition technologies : what will be the first %22killer app?'

Forsythe, James C.

This paper highlights key topic areas to be discussed the authors in a panel format during the Augmented Cognition thematic area paper session: 'Augmented Cognition Lessons Learned and Future Directions for Enabling 'Anyone, Anytime, Anywhere' Applications'. The term 'killer app' has been part of the vernacular in the commercial computer software and electronic devices industry to refer to breakthrough technologies [2]. A 'killer app' generally emerges with the development of related technologies that extends over some time and involves numerous variations on a basic concept. Hypotheses may be offered with respect to the conditions that will be needed to enable a similar situation with augmented cognition technologies. This paper and resulting panel session will address the numerous concepts that have emerged from the augmented cognition field to date and postulate how and when this field's first 'killer app' may emerge (e.g., 5, 10, 15, or more years from now).

More Details
TYPE Conference YEAR 2007
OSTI

Molten salt-based growth of bulk GaN and InN for substrates

Waldrip, Karen E.

An atmospheric pressure approach to growth of bulk group III-nitrides is outlined. Native III-nitride substrates for optoelectronic and high power, high frequency electronics are desirable to enhance performance and reliability of these devices; currently, these materials are available in research quantities only for GaN, and are unavailable in the case of InN. The thermodynamics and kinetics of the reactions associated with traditional crystal growth techniques place these activities on the extreme edges of experimental physics. The novel techniques described herein rely on the production of the nitride precursor (N{sup 3-}) by chemical and/or electrochemical methods in a molten halide salt. This nitride ion is then reacted with group III metals in such a manner as to form the bulk nitride material. The work performed during the period of funding (February 2006-September 2006) focused on establishing that mass transport of GaN occurs in molten LiCl, the construction of a larger diameter electrochemical cell, the design, modification, and installation of a made-to-order glove box (required for handling very hygroscopic LiCl), and the feasibility of using room temperature molten salts to perform nitride chemistry experiments.

More Details
TYPE SAND Report YEAR 2007
DOIOSTI

Update of the Z Refurbishment project (ZR) at Sandia National Laboratories

Bloomquist, Douglas D.; McDaniel, Dillon H.; Mckee, G.R.; Donovan, Guy L.; Weed, John W.; Faturos, Thomas V.; Tabor, Debra; Jordan, Carla M.

Sandia's Z Refurbishment (ZR) Project formally began in February 2002 to increase the Z Accelerator's utilization by providing the capability to perform more shots, improve precision and pulse shape variability, and increase delivered current. A project update was provided at the 15th International Pulsed Power Conference in 2005. The Z facility was shut down in July 2006 for structural/infrastructure modifications and installation of new pulsed power systems. The refurbishment will conclude in 2007. This paper provides a status update of the project covering the past 2 years of activities.

More Details
TYPE Conference YEAR 2007
OSTI

Final report : PATTON Alliance gazetteer evaluation project

Bleakly, Denise

In 2005 the National Ground Intelligence Center (NGIC) proposed that the PATTON Alliance provide assistance in evaluating and obtaining the Integrated Gazetteer Database (IGDB), developed for the Naval Space Warfare Command Research group (SPAWAR) under Advance Research and Development Activity (ARDA) funds by MITRE Inc., fielded to the text-based search tool GeoLocator, currently in use by NGIC. We met with the developers of GeoLocator and identified their requirements for a better gazetteer. We then validated those requirements by reviewing the technical literature, meeting with other members of the intelligence community (IC), and talking with both the United States Geologic Survey (USGS) and the National Geospatial Intelligence Agency (NGA), the authoritative sources for official geographic name information. We thus identified 12 high-level requirements from users and the broader intelligence community. The IGDB satisfies many of these requirements. We identified gaps and proposed ways of closing these gaps. Three important needs have not been addressed but are critical future needs for the broader intelligence community. These needs include standardization of gazetteer data, a web feature service for gazetteer information that is maintained by NGA and USGS but accessible to users, and a common forum that brings together IC stakeholders and federal agency representatives to provide input to these activities over the next several years. Establishing a robust gazetteer web feature service that is available to all IC users may go a long way toward resolving the gazetteer needs within the IC. Without a common forum to provide input and feedback, community adoption may take significantly longer than anticipated with resulting risks to the war fighter.

More Details
TYPE SAND Report YEAR 2007
DOIOSTI

Optimization of screening for radioactivity in urine by liquid scintillation

Reese, Robert; Shanks, Sonoya T.

Numerous events have or could have resulted in the inadvertent uptake of radionuclides by fairly large populations. Should a population receive an uptake, valuable information could be obtained by using liquid scintillation counting (LSC) techniques to quickly screen urine from a sample of the affected population. This study investigates such LSC parameters as discrimination, quench, volume, and count time to yield guidelines for analyzing urine in an emergency situation. Through analyzing variations of the volume and their relationships to the minimum detectable activity (MDA), the optimum ratio of sample size to scintillating chemical cocktail was found to be 1:3. Using this optimum volume size, the alpha MDA varied from 2100 pCi/L for a 30-second count time to 35 pCi/L for a 1000-minute count time. The typical count time used by the Sandia National Laboratories Radiation Protection Sample Diagnostics program is 30 minutes, which yields an alpha MDA of 200 pCi/L. Because MDA is inversely proportional to the square root of the count time, count time can be reduced in an emergency situation to achieve the desired MDA or response time. Note that approximately 25% of the response time is used to prepare the samples and complete the associated paperwork. It was also found that if the nuclide of interest is an unknown, pregenerated discriminator settings and efficiency calibrations can be used to produce an activity value within a factor of two, which is acceptable for a screening method.

More Details
TYPE SAND Report YEAR 2007
DOIOSTI

One-dimensional ablation in multiwire arrays

Proposed for publication in Physics of Plasmas.

Yu, Edmund; Oliver, Bryan V.; Mehlhorn, Thomas A.

The main physical processes responsible for plasma ablation in multiwire Z pinches are considered via eigensolutions to one-dimensional steady state magnetohydrodynamics. A double scale-length structure of the plasma accelerating layer is demonstrated. The width of the resistive scale-length that defines the current layer structure is significantly larger than the thermal scale-length, where transport of energy toward the cores and plasma pressure play important roles. The transport of energy is provided mainly by radiation, though electron thermal conduction is also important very close to the plasma-core interface. Another type of solution of the steady state problem is revealed, when local Ohmic heating is important down to the interface. Selection between these two types of solutions is considered from multiple points of view. Although the one-dimensional problem is mainly considered in this paper, it is shown how the one-dimensional results may help to understand results of two-dimensional models.

More Details
TYPE Journal Article YEAR 2007
OSTI
Results 80601–80800 of 99,299
Results 80601–80800 of 99,299