Publications

Two relatively under-reported facets of fuel storage fire safety are examined in this work for a 250, 000 gallon two-tank storage system. Ignition probability is linked to the radiative flux from a presumed fire. First, based on observed features of existing designs, fires are expected to be largely contained within a designed footprint that will hold the full spilled contents of the fuel. The influence of the walls and the shape of the tanks on the magnitude of the fire is not a well-described aspect of conventional fire safety assessment utilities. Various resources are herein used to explore the potential hazard for a contained fire of this nature. Second, an explosive attack on the fuel storage has not been widely considered in prior work. This work explores some options for assessing this hazard. The various methods for assessing the constrained conventional fires are found to be within a reasonable degree of agreement. This agreement contrasts with the hazard from an explosive dispersal. Best available assessment techniques are used, which highlight some inadequacies in the existing toolsets for making predictions of this nature. This analysis, using the best available tools, suggests the offset distance for the ignition hazard from a fireball will be on the same order as the offset distance for the blast damage. This suggests the buy-down of risk by considering the fireball is minimal when considering the blast hazards. Assessment tools for the fireball predictions are not particularly mature, and ways to improve them for a higher-fidelity estimate are noted.

A comprehensive study of the mechanical response of a 316 stainless steel is presented. The split-Hopkinson bar technique was used to evaluate the mechanical behavior at dynamic strain rates of 500 s−1, 1500 s−1, and 3000 s−1 and temperatures of 22 °C and 300 °C under tension and compression loading, while the Drop-Hopkinson bar was used to characterize the tension behavior at an intermediate strain rate of 200 s−1. The experimental results show that the tension and compression flow stress are reasonably symmetric, exhibit positive strain rate sensitivity, and are inversely dependent on temperature. The true failure strain was determined by measuring the minimum diameter of the post-test tension specimen. The 316 stainless steel exhibited a ductile response, and the true failure strain increased with increasing temperature and decreased with increasing strain rate.

This is an investigation on two experimental datasets of laminar hypersonic flows, over a double-cone geometry, acquired in Calspan—University at Buffalo Research Center’s Large Energy National Shock (LENS)-XX expansion tunnel. These datasets have yet to be modeled accurately. A previous paper suggested that this could partly be due to mis-specified inlet conditions. The authors of this paper solved a Bayesian inverse problem to infer the inlet conditions of the LENS-XX test section and found that in one case they lay outside the uncertainty bounds specified in the experimental dataset. However, the inference was performed using approximate surrogate models. In this paper, the experimental datasets are revisited and inversions for the tunnel test-section inlet conditions are performed with a Navier–Stokes simulator. The inversion is deterministic and can provide uncertainty bounds on the inlet conditions under a Gaussian assumption. It was found that deterministic inversion yields inlet conditions that do not agree with what was stated in the experiments. An a posteriori method is also presented to check the validity of the Gaussian assumption for the posterior distribution. This paper contributes to ongoing work on the assessment of datasets from challenging experiments conducted in extreme environments, where the experimental apparatus is pushed to the margins of its design and performance envelopes.

While significant investments have been made in the exploration of ethics in computation, recent advances in high performance computing (HPC) and artificial intelligence (AI) have reignited a discussion for more responsible and ethical computing with respect to the design and development of pervasive sociotechnical systems within the context of existing and evolving societal norms and cultures. The ubiquity of HPC in everyday life presents complex sociotechnical challenges for all who seek to practice responsible computing and ethical technological innovation. The present paper provides guidelines which scientists, researchers, educators, and practitioners alike, can employ to become more aware of one’s personal values system that may unconsciously shape one’s approach to computation and ethics.

An inherited containment vessel design that has been used in the past to contain items in an environmental testing unit was brought to the Explosives Applications Lab to be analyzed and modified. The goal was to modify the vessel to contain an explosive event of 4g TNT equivalence at least once without failure or significant girth expansion while maintaining a seal. A total of ten energetic tests were performed on multiple vessels. In these tests, the 7075-T6 aluminum vessels were instrumented with thin-film resistive strain gages and both static and dynamic pressure gauges to study its ability to withstand an oversize explosive charge of 8g. Additionally, high precision girth (pi tape) measurements were taken before and after each test to measure the plastic growth of the vessel due to the event. Concurrent with this explosive testing, hydrocode modeling of the containment vessel and charge was performed. The modeling results were shown to agree with the results measured in the explosive field testing. Based on the data obtained during this testing, this vessel design can be safely used at least once to contain explosive detonations of 8g at the center of the chamber for a charge that will not result in damaging fragments.

This work developed a methodology for transmission line modeling of cable installations to predict the propagation of conducted high altitude electromagnetic pulses in a substation or generating plant. The methodology was applied to a termination cabinet example that was modeled with SPICE transmission line elements with information from electromagnetic field modeling and with validation using experimental data. The experimental results showed reasonable agreement to the modeled propagating pulse and can be applied to other installation structures in the future.

Prescriptive approaches for the cybersecurity of digital nuclear instrumentation and control (I&C) systems can be cumbersome and costly. These considerations are of particular concern for advanced reactors that implement digital technologies for monitoring, diagnostics, and control. A risk-informed performance-based approach is needed to enable the efficient design of secure digital I&C systems for nuclear power plants. This paper presents a tiered cybersecurity analysis (TCA) methodology as a graded approach for cybersecurity design. The TCA is a sequence of analyses that align with the plant, system, and component stages of design. Earlier application of the TCA in the design process provides greater opportunity for an efficient graded approach and defense-in-depth. The TCA consists of three tiers. Tier 1 is design and impact analysis. In Tier 1 it is assumed that the adversary has control over all digital systems, components, and networks in the plant, and that the adversary is only constrained by the physical limitations of the plant design. The plant's safety design features are examined to determine whether the consequences of an attack by this cyber-enabled adversary are eliminated or mitigated. Accident sequences that are not eliminated or mitigated by security by design features are examined in Tier 2 analysis. In Tier 2, adversary access pathways are identified for the unmitigated accident sequences, and passive measures are implemented to deny system and network access to those pathways wherever feasible. Any systems with remaining susceptible access pathways are then examined in Tier 3. In Tier 3, active defensive cybersecurity architecture features and cybersecurity plan controls are applied to deny the adversary the ability to conduct the tasks needed to cause a severe consequence. Tier 3 is not performed in this analysis because of the design maturity required for this tier of analysis.

High reliability (Hi-Rel) electronics for mission critical applications are handled with extreme care; stress testing upon full assembly can increase a likelihood of degrading these systems before their deployment. Moreover, novel material parts, such as wide bandgap semiconductor devices, tend to have more complicated fabrication processing needs which could ultimately result in larger part variability or potential defects. Therefore, an intelligent screening and inspection technique for electronic parts, in particular gallium nitride (GaN) power transistors, is presented in this paper. We present a machine-learning-based non-intrusive technique that can enhance part-selection decisions to categorize the part samples to the population's expected electrical characteristics. This technique provides relevant information about GaN HEMT device characteristics without having to operate all of these devices at the high current region of the transfer and output characteristics, lowering the risk of damaging the parts prematurely. The proposed non-intrusive technique uses a small signal pulse width modulation (PWM) of various frequencies, ranging from 10 kHz to 500 kHz, injected into the transistor terminals and the corresponding output signals are observed and used as training dataset. Unsupervised clustering techniques with K-means and feature dimensional reduction through principal component analysis (PCA) have been used to correlate a population of GaN HEMT transistors to the expected mean of the devices' electrical characteristic performance.

The International Electrotechnical Commission (IEC) Subcommittee SC45A has been active in development of cybersecurity standards and technical reports on the protection of Instrumentation and Control (I&C) and Electrical Power Systems (ES) that perform significant functions necessary for the safe and secure operation of Nuclear Power Plants (NPP). These international standards and reports advance and promote the implementation of good practices around the world. In recent years, there have been advances in NPP cybersecurity risk management nationally and internationally. For example, IAEA publications NSS 17-T [1] and NSS 33-T [2], propose a framework for computer security risk management that implements a risk management program at both the facility and individual system levels. These international approaches (i.e., IAEA), national approaches (e.g., Canada’s HTRA [3]) and technical methods (e.g., HAZCADS [4], Cyber Informed Engineering [5], France’s EBIOS [6]) have advanced risk management within NPP cybersecurity programmes that implement international and national standards. This paper summarizes key elements of the analysis that developed the new IEC Technical Report. The paper identifies the eleven challenges for applying ISO/IEC 27005:2018 [7]. cybersecurity risk management to I&C Systems and EPS of NPPs and a summary comparison of how national approaches address these challenges.

As the electric grid becomes increasingly cyber-physical, it is important to characterize its inherent cyber-physical interdepedencies and explore how that characterization can be leveraged to improve grid operation. It is crucial to investigate what data features are transferred at the system boundaries, how disturbances cascade between the systems, and how planning and/or mitigation measures can leverage that information to increase grid resilience. In this paper, we explore several numerical analysis and graph decomposition techniques that may be suitable for modeling these cyber-physical system interdependencies and for understanding their significance. An augmented WSCC 9-bus cyber-physical system model is used as a small use-case to assess these techniques and their ability in characterizing different events within the cyber-physical system. These initial results are then analyzed to formulate a high-level approach for characterizing cyber-physical interdependencies.

In this work, a modular and open-source platform has been developed for integrating hybrid battery energy storage systems that are intended for grid applications. Alongside integration, this platform will facilitate testing and optimal operation of hybrid storage technologies. Here, a hardware testbed and a control software have been designed, where the former comprises commercial Lithium-iron-phosphate (LiFePO4) and Lead Acid (Pb - acid) cells, custom built Dual Active Bridge (DAB) DC-DC converters, and a commercial DC-AC conversion system. In this testbed the batteries have an operating voltage range of 11-15V, the DC-AC conversion stage has a DC link voltage of 24V, and it connects to a 208V3-φ grid. The hardware testbed can be scaled up to higher voltages. The control software is developed in Python, and the firmware for all the hardware components is developed in C. This software implements hybrid charge/discharge protocols that are suitable for each battery technology for preventing cell degradation, and perform uninter-rupted quality checks on selected battery packs. The developed platform provides flexibility, modularity, safety and economic benefits to utility-scale storage integration.

A microgrid is characterized by a high R/X ratio, making the voltage more sensitive to active power changes unlike in bulk power systems where voltage is mostly regulated by reactive power. Because of its sensitivity to active power, control approach should incorporate active power as well. Thus, the voltage control approach for microgrids is very different from conventional power systems. The energy costs associated with these power are different. Furthermore, because of diverse generation sources and different components such as distributed energy resources, energy storage systems, etc, model-based control approaches might not perform very well. This paper proposes a reinforcement learning-based voltage support framework for a microgrid where an agent learns control policy by interacting with the microgrid without requiring a mathematical model of the system. A MATLAB/Simulink simulation study on a test system from Cordova, Alaska shows that there is a large reduction in voltage deviation (about 2.5-4.5 times). This reduction in voltage deviation can improve the power quality of the microgrid: ensuring a reliable supply, longer equipment lifespan, and stable user operations.

Creation of a Sandia internally developed, shock-hardened Recoverable Data Recorder (RDR) necessitated experimentation by ballistically-firing the device into water targets at velocities up to 5,000 ft/s. The resultant mechanical environments were very severe—routinely achieving peak accelerations in excess of 200 kG and changes in pseudo-velocity greater than 38,000 inch/s. High-quality projectile deceleration datasets were obtained though high-speed imaging during the impact events. The datasets were then used to calibrate and validate computational models in both CTH and EPIC. Hydrodynamic stability in these environments was confirmed to differ from aerodynamic stability; projectile stability is maintained through a phenomenon known as “tail-slapping” or impingement of the rear of the projectile on the cavitation vapor-water interface which envelopes the projectile. As the projectile slows the predominate forces undergo a transition which is outside the codes’ capabilities to calculate accurately, however, CTH and EPIC both predict the projectile trajectory well in the initial hypervelocity regime. Stable projectile designs and the achievable acceleration space are explored through a large parameter sweep of CTH simulations. Front face chamfer angle has the largest influence on stability with low angles being more stable.

High-altitude electromagnetic pulse events are a growing concern for electric power grid vulnerability assessments and mitigation planning, and accurate modeling of surge arrester mitigations installed on the grid is necessary to predict pulse effects on existing equipment and to plan future mitigation. While some models of surge arresters at high frequency have been proposed, experimental backing for any given model has not been shown. This work examines a ZnO lightning surge arrester modeling approach previously developed for accurate prediction of nanosecond-scale pulse response. Four ZnO metal-oxide varistor pucks with different sizes and voltage ratings were tested for voltage and current response on a conducted electromagnetic pulse testbed. The measured clamping response was compared to SPICE circuit models to compare the electromagnetic pulse response and validate model accuracy. Results showed good agreement between simulation results and the experimental measurements, after accounting for stray testbed inductance between 100 and 250 nH.

Extreme meteorological events, such as hurricanes and floods, cause significant infrastructure damage and, as a result, prolonged grid outages. To mitigate the negative effect of these outages and enhance the resilience of communities, microgrids consisting of solar photovoltaics (PV), energy storage (ES) technologies, and backup diesel generation are being considered. Furthermore, it is necessary to take into account how the extreme event affects the systems' performance during the outage, often referred to as black-sky conditions. In this paper, an optimization model is introduced to properly size ES and PV technologies to meet various duration of grid outages for selected critical infrastructure while considering black-sky conditions. A case study of the municipality of Villalba, Puerto Rico is presented to identify the several potential microgrid configurations that increase the community's resilience. Sensitivity analyses are performed around the grid outage durations and black-sky conditions to better decide what factors should be considered when scoping potential microgrids for community resilience.

Abstract not provided.

Creation of a Sandia internally developed, shock-hardened Recoverable Data Recorder (RDR) necessitated experimentation by ballistically-firing the device into water targets at velocities up to 5,000 ft/s. The resultant mechanical environments were very severe—routinely achieving peak accelerations in excess of 200 kG and changes in pseudo-velocity greater than 38,000 inch/s. High-quality projectile deceleration datasets were obtained though high-speed imaging during the impact events. The datasets were then used to calibrate and validate computational models in both CTH and EPIC. Hydrodynamic stability in these environments was confirmed to differ from aerodynamic stability; projectile stability is maintained through a phenomenon known as “tail-slapping” or impingement of the rear of the projectile on the cavitation vapor-water interface which envelopes the projectile. As the projectile slows the predominate forces undergo a transition which is outside the codes’ capabilities to calculate accurately, however, CTH and EPIC both predict the projectile trajectory well in the initial hypervelocity regime. Stable projectile designs and the achievable acceleration space are explored through a large parameter sweep of CTH simulations. Front face chamfer angle has the largest influence on stability with low angles being more stable.

Machining-based deformation processing is used to produce metal foil and flat wire (strip) with suitable properties and quality for electrical power and renewable energy applications. In contrast to conventional multistage rolling, the strip is produced in a single-step and with much less process energy. Examples are presented from metal systems of varied workability, and strip product scale in terms of size and production rate. By utilizing the large-strain deformation intrinsic to cutting, bulk strip with ultrafine-grained microstructure, and crystallographic shear-texture favourable for formability, are achieved. Implications for production of commercial strip for electric motor applications and battery electrodes are discussed.

In recent years, high-altitude infrasound sensing has become more prolific, demonstrating an enormous value especially when utilized over regions inaccessible to traditional ground-based sensing. Similar to ground-based infrasound detectors, airborne sensors take advantage of the fact that impulsive atmospheric events such as explosions can generate low frequency acoustic waves, also known as infrasound. Due to negligible attenuation, infrasonic waves can travel over long distances, and provide important clues about their source. Here, we report infrasound detections of the Apollo detonation that was carried on 29 October 2020 as part of the Large Surface Explosion Coupling Experiment in Nevada, USA. Infrasound sensors attached to solar hot air balloons floating in the stratosphere detected the signals generated by the explosion at distances 170–210 km. Three distinct arrival phases seen in the signals are indicative of multipathing caused by the small-scale perturbations in the atmosphere. We also found that the local acoustic environment at these altitudes is more complex than previously thought.

A high altitude electromagnetic pulse (HEMP) or other similar geomagnetic disturbance (GMD) has the potential to severely impact the operation of large-scale electric power grids. By introducing low-frequency common-mode (CM) currents, these events can impact the performance of key system components such as large power transformers. In this work, a solid-state transformer (SST) that can replace susceptible equipment and improve grid resiliency by safely absorbing these CM insults is described. An overview of the proposed SST power electronics and controls architecture is provided, a system model is developed, and the performance of the SST in response to a simulated CM insult is evaluated. Compared to a conventional magnetic transformer, the SST is found to recover quickly from the insult while maintaining nominal ac input/output behavior.

We present the SEU sensitivity and SEL results from proton and heavy ion testing performed on NVIDIA Xavier NX and AMD Ryzen V1605B GPU devices in both static and dynamic operation.

Measurements of gas-phase temperature and pressure in hypersonic flows are important for understanding gas-phase fluctuations which can drive dynamic loading on model surfaces and to study fundamental compressible flow turbulence. To achieve this capability, femtosecond coherent anti-Stokes Raman scattering (fs CARS) is applied in Sandia National Laboratories’ cold-flow hypersonic wind tunnel facility. Measurements were performed for tunnel freestream temperatures of 42–58 K and pressures of 1.5–2.2 Torr. The CARS measurement volume was translated in the flow direction during a 30-second tunnel run using a single computer-controlled translation stage. After broadband femtosecond laser excitation, the rotational Raman coherence was probed twice, once at an early time where the collisional environment has not affected the Raman coherence, and another at a later time after the collisional environment has led to significant dephasing of the Raman coherent. The gas-phase temperature was obtained primarily from the early-probe CARS spectra, while the gas-phase pressure was obtained primarily from the late-probe CARS spectra. Challenges in implementing fs CARS in this facility such as changes in the nonresonant spectrum at different measurement location are discussed.

Complex angle theory can offer new fundamental insights into refraction at the absorptive interface. In this work we propose a new method to induce isofrequency opening via addition of scattering in the dual interface system.

Surrogate construction is an essential component for all non-deterministic analyses in science and engineering. The efficient construction of easy and cheaper-to-run alternatives to a computationally expensive code paves the way for outer loop workflows for forward and inverse uncertainty quantification and optimization. Unfortunately, the accurate construction of a surrogate still remains a task that often requires a prohibitive number of computations, making the approach unattainable for large-scale and high-fidelity applications. Multifidelity approaches offer the possibility to lower the computational expense requirement on the highfidelity code by fusing data from additional sources. In this context, we have demonstrated that multifidelity Bayesian Networks (MFNets) can efficiently fuse information derived from models with an underlying complex dependency structure. In this contribution, we expand on our previous work by adopting a basis adaptation procedure for the selection of the linear model representing each data source. Our numerical results demonstrate that this procedure is computationally advantageous because it can maximize the use of limited data to learn and exploit the important structures shared among models. Two examples are considered to demonstrate the benefits of the proposed approach: an analytical problem and a nuclear fuel finite element assembly. From these two applications, a lower dependency of MFnets on the model graph has been also observed.

Subhourly changes in solar irradiance can lead to energy models being biased high if realistic distributions of irradiance values are not reflected in the resource data and model. This is particularly true in solar facility designs with high inverter loading ratios (ILRs). When resource data with sufficient temporal and spatial resolution is not available for a site, synthetic variability can be added to the data that is available in an attempt to address this issue. In this work, we demonstrate the use of anonymized commercial resource datasets with synthetic variability and compare results with previous estimates of model bias due to inverter clipping and increasing ILR.