Publications

presentation for DAMOP 2024

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We demonstrate evanescently coupled waveguide integrated silicon photonic avalanche photodiodes designed for single photon detection for quantum applications. Simulation, high responsivity, and record low dark currents for evanescently coupled devices are presented.

We demonstrate for the first time waveguide integrated cascaded germanium photodetector arrays operated as photocells. We characterize several different array designs, and discuss their effects on voltage and photocurrent performance parameters.

Abstract not provided.

Low loss silicon nitride ring resonator reflectors provide feedback to a III/V gain chip, achieving single-mode lasing at 772nm. The Si3N4 is fabricated in a CMOS foundry compatible process that achieves loss values of 0.036dB/cm.

We demonstrate piezo-optomechanical phase control in a c-band silicon-photonic resonator using CMOS-compatible AlN microactuators. We achieve a frequency tuning response of 26.91 ± 0.77 MHz/V DC, operating at picowatt to nanowatt power levels.

TFLN/silicon photonic modulators featuring active silicon photonic components are reported with a Vπ of 3.6 Vcm. This hybrid architecture utilizes the bottom of the buried oxide as the bonding surface which features minimum topology.

The extreme miniaturization of a cold-atom interferometer accelerometer requires the development of novel technologies and architectures for the interferometer subsystems. Here, we describe several component technologies and a laser system architecture to enable a path to such miniaturization. We developed a custom, compact titanium vacuum package containing a microfabricated grating chip for a tetrahedral grating magneto-optical trap (GMOT) using a single cooling beam. In addition, we designed a multi-channel photonic-integrated-circuit-compatible laser system implemented with a single seed laser and single sideband modulators in a time-multiplexed manner, reducing the number of optical channels connected to the sensor head. In a compact sensor head containing the vacuum package, sub-Doppler cooling in the GMOT produces 15 μK temperatures, and the GMOT can operate at a 20 Hz data rate. We validated the atomic coherence with Ramsey interferometry using microwave spectroscopy, then demonstrated a light-pulse atom interferometer in a gravimeter configuration for a 10 Hz measurement data rate and T = 0–4.5 ms interrogation time, resulting in Δg/g = 2.0 × 10−6. This work represents a significant step towards deployable cold-atom inertial sensors under large amplitude motional dynamics.

The growing demand for bandwidth makes photonic systems a leading candidate for future telecommunication and radar technologies. Integrated photonic systems offer ultra-wideband performance within a small footprint, which can naturally interface with fiber-optic networks for signal transmission. However, it remains challenging to realize narrowband (∼MHz) filters needed for high-performance communications systems using integrated photonics. In this paper, we demonstrate all-silicon microwave-photonic notch filters with 50× higher spectral resolution than previously realized in silicon photonics. This enhanced performance is achieved by utilizing optomechanical interactions to access long-lived phonons, greatly extending available coherence times in silicon. We use a multi-port Brillouin-based optomechanical system to demonstrate ultra-narrowband (2.7 MHz) notch filters with high rejection (57 dB) and frequency tunability over a wide spectral band (6 GHz) within a microwave-photonic link. We accomplish this with an all-silicon waveguide system, using CMOS-compatible fabrication techniques.

Abstract not provided.

Abstract not provided.

As trapped ion systems add more ions to allow for increasingly sophisticated quantum processing and sensing capabilities, the traditional optical-mechanical laboratory infrastructure that make such systems possible are in some cases the limiting factor in further growth of the systems. One promising solution is to integrate as many, if not all, optical components such as waveguides and gratings, single-photon detectors, and high extinction ratio optical switches/modulators either into ion traps themselves or into auxiliary devices that can be easily integrated with ion traps. Here we report on recent efforts at Sandia National Laboratories to include integrated photonics in our surface ion trap platforms.

We demonstrate an optical waveguide device capable of supporting the optical power necessary for trapping a single atom or a cold-atom ensemble with evanescent fields. Our photonic integrated platform successfully manages optical powers of ~30mW.

The canonical beam splitter - a fundamental building block of quantum optical systems - is a reciprocal element. It operates on forward- and backward-propagating modes in the same way, regardless of direction. The concept of nonreciprocal quantum photonic operations, by contrast, could be used to transform quantum states in a momentum- and direction-selective fashion. Here we demonstrate the basis for such a nonreciprocal transformation in the frequency domain through intermodal Bragg scattering four-wave mixing (BSFWM). Since the total number of idler and signal photons is conserved, the process can preserve coherence of quantum optical states, functioning as a nonreciprocal frequency beam splitter. We explore the origin of this nonreciprocity and find that the phase-matching requirements of intermodal BSFWM produce an enormous asymmetry (76×) in the conversion bandwidths for forward and backward configurations, yielding ∼25 dB of nonreciprocal contrast over several hundred GHz. We also outline how the demonstrated efficiencies (∼10-4) may be scaled to near-unity values with readily accessible powers and pumping configurations for applications in integrated quantum photonics.

We report on the characterization of heating rates and photoinduced electric charging on a microfabricated surface ion trap with integrated waveguides. Microfabricated surface ion traps have received considerable attention as a quantum information platform due to their scalability and manufacturability. Here, we characterize the delivery of 435-nm light through waveguides and diffractive couplers to a single ytterbium ion in a compact trap. We measure an axial heating rate at room temperature of 0.78±0.05 q/ms and see no increase due to the presence of the waveguide. Furthermore, the electric field due to charging of the exposed dielectric outcoupler settles under normal operation after an initial shift. The frequency instability after settling is measured to be 0.9 kHz.

Abstract not provided.

Abstract not provided.

We demonstrate an optical waveguide device, capable of supporting the high, invacuum, optical power necessary for trapping a single atom or a cold atom ensemble with evanescent fields. Our photonic integrated platform, with suspended membrane waveguides, successfully manages optical powers of 6 mW (500 μm span) to nearly 30 mW (125 μm span) over an un-tethered waveguide span. This platform is compatible with laser cooling and magnetooptical traps (MOTs) in the vicinity of the suspended waveguide, called the membrane MOT and the needle MOT, a key ingredient for efficient trap loading. We evaluate two novel designs that explore critical thermal management features that enable this large power handling. This work represents a significant step toward an integrated platform for coupling neutral atom quantum systems to photonic and electronic integrated circuits on silicon.

Abstract not provided.

We present narrowband RF-photonic filters in an integrated silicon platform. Using Brillouin interactions, the filters yield narrowband (∼MHZ) filter bandwidths with high signal rejection, and demonstrate tunability over a wide (∼GHz) frequency range.

Passive silicon photonic waveguides are exposed to gamma radiation to understand how the performance of silicon photonic integrated circuits is affected in harsh environments such as space or high energy physics experiments. The propagation loss and group index of the mode guided by these waveguides is characterized by implementing a phase sensitive swept-wavelength interferometric method. We find that the propagation loss associated with each waveguide geometry explored in this study slightly increases at absorbed doses of up to 100 krad (Si). The measured change in group index associated with the same waveguide geometries is negligibly changed after exposure. Additionally, we show that the post-exposure degradation of these waveguides can be improved through heat treatment.

As self-sustained oscillators, lasers possess the unusual ability to spontaneously synchronize. These nonlinear dynamics are the basis for a simple yet powerful stabilization technique known as injection locking, in which a laser's frequency and phase can be controlled by an injected signal. Because of its inherent simplicity and favorable noise characteristics, injection locking has become a workhorse for coherent amplification and high-fidelity signal synthesis in applications ranging from precision atomic spectroscopy to distributed sensing. Within integrated photonics, however, these injection-locking dynamics remain relatively untapped - despite significant potential for technological and scientific impact. Here, we demonstrate injection locking in a silicon photonic Brillouin laser. Injection locking of this monolithic device is remarkably robust, allowing us to tune the laser emission by a significant fraction of the Brillouin gain bandwidth. Harnessing these dynamics, we demonstrate amplification of small signals by more than 23 dB. Moreover, we demonstrate that the injection-locking dynamics of this system are inherently nonreciprocal, yielding unidirectional control and backscatter immunity in an all-silicon system. This device physics opens the door to strategies for phase-noise reduction, low-noise amplification, and backscatter immunity in silicon photonics.

Abstract not provided.

Abstract not provided.

We demonstrate injection-locked operation of a silicon-based Brillouin laser for the first time. The unique spatio-temporal inter-modal Brillouin dynamics enable nonreciprocal control and low-phase-noise operation within a monolithically integrated system.

Abstract not provided.

Silicon photonics is a platform that enables densely integrated photonic components and systems and integration with electronic circuits. Depletion mode modulators designed on this platform suffer from a fundamental frequency response limit due to the mobility of carriers in silicon. Lithium niobate-based modulators have demonstrated high performance, but the material is difficult to process and cannot be easily integrated with other photonic components and electronics. In this manuscript, we simultaneously take advantage of the benefits of silicon photonics and the Pockels effect in lithium niobate by heterogeneously integrating silicon photonic-integrated circuits with thin-film lithium niobate samples. We demonstrate the most CMOS-compatible thin-film lithium niobate modulator to date, which has electro-optic 3 dB bandwidths of 30.6 GHz and half-wave voltages of 6.7 V×cm. These modulators are fabricated entirely in CMOS facilities, with the exception of the bonding of a thin-film lithium niobate sample post fabrication, and require no etching of lithium niobate.

Abstract not provided.

Atomic clocks are precision timekeeping devices that form the basis for modern communication and navigation. While many atomic clocks are room-sized systems requiring bulky free space optics and detectors, the Trapped-lon Clock using Technology-On-Chip (TICTOC) project integrates these components into Sandia's existing surface trap technology via waveguides for beam delivery and avalanche photodiodes for light detection. Taking advantage of a multi-ensemble clock interrogation approach, we expect to achieve record time stability (< 1 ns error per year) in a compact (< /1 2 L) clock. Here, we present progress on the development of the integrated devices and recent trapped ion demonstrations.

A compact radio frequency (RF) photonic receiver consisting of several photonic integrated circuits (PIC) that performs channelization and simultaneously downconverts the signal is described. A technique is also presented to adjust the phase shifters of the arrayed waveguide grating channelizer without direct phase measurements.

We present a 30 GHz heterogeneously integrated silicon photonic/lithium niobate Mach-Zehnder modulator simultaneously utilizing the strong Pockels effect in LiNbO3 while also taking advantage of the ability for photonic/electronic integration and mass production associated with silicon photonics. Aside from the final step of bonding the LiNbO3, this modulator can be entirely fabricated using CMOS facilities.

Abstract not provided.

We demonstrate the first silicon photonic single-sideband (SSB)modulator with dual-parallel Mach-Zehnder modulators (MZMs)operating near 1550 nm with a measured carrier suppression of 27 dB and at least 12 dB sideband suppression at 1 GHz.

Phase errors in large optical phased arrays degrade beam quality and must be actively corrected. Using a novel, low-power electro-optic design with matched pathlengths, we demonstrate simplified optimization and reduced sensitivity to wavelength and temperature.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Measurement uncertainties in the techniques used to characterize loss in photonic waveguides becomes a significant issue as waveguide loss is reduced through improved fabrication technology. Typical loss measurement techniques involve environmentally unknown parameters such as facet reflectivity or varying coupling efficiencies, which directly contribute to the uncertainty of the measurement. We present a loss measurement technique, which takes advantage of the differential loss between multiple paths in an arrayed waveguide structure, in which we are able to gather statistics on propagation loss from several waveguides in a single measurement. This arrayed waveguide structure is characterized using a swept-wavelength interferometer, enabling the analysis of the arrayed waveguide transmission as a function of group delay between waveguides. Loss extraction is only dependent on the differential path length between arrayed waveguides and is therefore extracted independently from on and off-chip coupling efficiencies, which proves to be an accurate and reliable method of loss characterization. This method is applied to characterize the loss of the silicon photonic platform at Sandia Labs with an uncertainty of less than 0.06 dB/cm.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

An 11-channel 1-GHz bandwidth silicon photonic AWG was fabricated and measured in the lab. Two photonic architectures are presented: (1) RF-envelope detector, and (2) RF downconvertor for digital systems. The RF-envelope detector architecture was modeled based on the demonstrated AWG characteristics to determine estimated system-level RF receiver performance.