We present an overview of the design and development of optical self-emission and debris imaging diagnostics for the Z Machine at Sandia National Laboratories. These diagnostics were designed and implemented to address several gaps in our understanding of visibly emitting phenomenon on Z and the post-shot debris environment. Optical emission arises from plasmas that form on the transmission line that delivers energy to Z loads and on the Z targets themselves; however, the dynamics of these plasmas are difficult to assess without imaging data. Addressing this, we developed a new optical imager called SEGOI (Self-Emission Gated Optical Imager) that leverages the eight gated optical imagers and two streak cameras of the Z Line VISAR system. SEGOI is a low cost, side-on imager with a 1 cm field of view and 30-50 µm spatial resolution, sensitive to green light (540-600 nm). This report outlines the design considerations and development of this diagnostic and presents an overview of the first diagnostic data acquired from four experimental campaigns. SEGOI was fielded on power flow experiments to image plasmas forming on and between transmission lines, on an inertial confinement fusion experiment called the Dynamic Screw Pinch to image low density plasmas forming on return current posts, on an experiment designed to measure the magneto Rayleigh-Taylor instability to image the instability bubble trajectory and self-emission structures, and finally on a Magnetized Liner Inertial Fusion (MagLIF) experiment to image the emission from the target. The second diagnostic developed, called DINGOZ (Debris ImagiNG on Z), was designed to improve our understanding of the post-shot debris environment. DINGOZ is an airtight enclosure that houses electronics and batteries to operate a high-speed (10-400 kfps) camera in the Z Machine center section. We report on the design considerations of this new diagnostic and present the first high-speed imaging data of the post-shot debris environment on Z.
A decentered Zernike overlay is utilized in the design of a field biased off-axis wide field of view reflective imager and the optical performance with this surface type is compared to a conic only solution.
This paper describes measurements being made on a series of material systems for the purpose of developing a radiative-transfer model that describes the reflectance of light by granular solids. It is well recognized that the reflectance spectra of granular materials depend on their intrinsic (n(λ) and k(λ)) and extrinsic (morphological) properties. There is, however, a lack of robust and proven models to relate spectra to these parameters. The described work is being conducted in parallel with a modeling effort1 to address this need. Each follows a common developmental spiral in which material properties are varied and the ability of the model to calculate the effects of the changes are tested. The parameters being varied include particle size/shape, packing density, material birefringence, optical thickness, and spectral contribution of a substrate. It is expected that the outcome of this work will be useful in interpreting reflectance data for hyperspectral imaging (HSI), and for a variety of other areas that rely on it.