In this paper we have shown how the direction cosine method of stripmap-mode IFSAR maybe modified for use in the spotlight-mode case. Spotlight-mode IFSAR geometry dictates a common aperture phase center, velocity vector, and baseline vector for every pixel in an image. Angle with respect to the velocity vector is the same for every pixel in a given column and can be computed from the column index, the Doppler of the motion compensation point and the Doppler column sample spacing used in image formation. With these modifications, the direction cosines and length of the line of sight vector to every scatterer in the scene may be computed directly from the raw radar measurements of range, Doppler, and interferometric phase.
One of the key elements of the Stochastic Finite Element Method, namely the polynomial chaos expansion, has been utilized in a nonlinear shock and vibration application. As a result, the computed response was expressed as a random process, which is an approximation to the true solution process, and can be thought of as a generalization to solutions given as statistics only. This approximation to the response process was then used to derive an analytically-based design specification for component shock response that guarantees a balanced level of marginal reliability. Hence, this analytically-based reference SRS might lead to an improvement over the somewhat ad hoc test-based reference in the sense that it will not exhibit regions of conservativeness. nor lead to overtesting of the design.
Experienced experimentalists have gone through the process of attempting to identify a final set of modal parameters from several different sets of extracted parameters. Usually, this is done by visually examining the mode shapes. With the advent of automated modal parameter extraction algorithms such as SMAC (Synthesize Modes and Correlate), very accurate extractions can be made to high frequencies. However, this process may generate several hundred modes that then must be consolidated into a final set of modal information. This has motivated the authors to generate a set of tools to speed the process of consolidating modal parameters by mathematical (instead of visual) means. These tools help quickly identify the best modal parameter extraction associated with several extractions of the same mode. The tools also indicate how many different modes have been extracted in a nominal frequency range and from which references. The mathematics are presented to achieve the best modal extraction of multiple modes at the same nominal frequency. Improvements in the SMAC graphical user interface and database are discussed that speed and improve the entire extraction process.
The solution-mediated synthesis and single crystal structure of (CN{sub 3}H{sub 6}){sub 2} {center_dot} Zn(HPO{sub 3}){sub 2} are reported. This phase is built up from a three-dimensional framework of vertex-linked ZnO{sub 4} and HPO{sub 3} building units encapsulating the extra-framework guanidinium cations. The structure is stabilized by template-to-framework hydrogen bonding. The inorganic framework shows a surprising similarity to those of some known zinc phosphates. Crystal data: (CN{sub 3}H{sub 6}){sub 2} {center_dot} Zn(HPO{sub 3}){sub 2}, AI,= 345.50, orthorhombic, space group Fdd2 (No. 43), a = 15.2109 (6) {angstrom}, b = 11.7281 (5) {angstrom}, c = 14.1821 (6) {angstrom}, V = 2530.0 (4){angstrom}{sup 3}, Z = 8, T = 298 (2)K, R(F) = 0.020, wR(F) = 0.025.
The thermal-hydrologic (TH) and coupled process models describe the evolution of a potential geologic repository as heat is released from emplaced waste. The evolution (thermal, hydrologic, chemical, and mechanical) of the engineered barrier and geologic systems is heavily dependent on the heat released by the waste packages and how the heat is transferred from the emplaced wastes through the drifts and through the repository host rock. The essential elements of this process are extracted (or abstracted) from the process-level models that incorporate the basic energy and mass conservation principles and applied to the total system models used to describe the overall performance of the potential repository. The process of total system performance assessment (TSPA) abstraction is the following. First is a description of the parameter inputs used in the process-level models. A brief description is given hereof past inputs for the viability assessment (e.g., for TSPA-VA) and current inputs for the site recommendation (TSPA-SR). This is followed by a highlight of the process-level models from which the abstractions are made. These include descriptions of TH, thermal-hydrologic-chemical (THC), and thermal-mechanical (TM) processes used to describe the performance of individual waste packages and waste emplacement drifts as well as the repository as a whole. Next is a description of what (and how) information is abstracted from the process-level models. This also includes an accounting of the features, events, and processes (FEPs) that are important to both the regulators and the international repository community in general. Finally, an identification of the TSPA model components that utilize the abstracted information to characterize the overall performance of a potential geologic repository is given.
In this paper an optimization-based method of drift prevention is presented for learning control of underdetermined linear and weakly nonlinear time-varying dynamic systems. By defining a fictitious cost function and the associated model-based sub-optimality conditions, a new set of equations results, whose solution is unique, thus preventing large drifts from the initial input. Moreover, in the limiting case where the modeling error approaches zero, the input that the proposed method converges to is the unique feasible (zero error) input that minimizes the fictitious cost function, in the linear case, and locally minimizes it in the (weakly) nonlinear case. Otherwise, under mild restrictions on the modeling error, the method converges to a feasible sub-optimal input.
The abstraction model used for seepage into emplacement drifts in recent TSPA simulations has been presented. This model contributes to the calculation of the quantity of water that might contact waste if it is emplaced at Yucca Mountain. Other important components of that calculation not discussed here include models for climate, infiltration, unsaturated-zone flow, and thermohydrology; drip-shield and waste-package degradation; and flow around and through the drip shield and waste package. The seepage abstraction model is stochastic because predictions of seepage are necessarily quite uncertain. The model provides uncertainty distributions for seepage fraction fraction of waste-package locations flow rate as functions of percolation flux. In addition, effects of intermediate-scale flow with seepage and seep channeling are included by means of a flow-focusing factor, which is also represented by an uncertainty distribution.
A numerical flow model is developed to simulate two-dimensional fluid flow past immersed, elastically supported tube arrays. This work is motivated by the objective of predicting forces and motion associated with both deep-water drilling and production risers in the oil industry. This work has other engineering applications including simulation of flow past tubular heat exchangers or submarine-towed sensor arrays and the flow about parachute ribbons. In the present work, a vortex method is used for solving the unsteady flow field. This method demonstrates inherent advantages over more conventional grid-based computational fluid dynamics. The vortex method is non-iterative, does not require artificial viscosity for stability, displays minimal numerical diffusion, can easily treat moving boundaries, and allows a greatly reduced computational domain since vorticity occupies only a small fraction of the fluid volume. A gridless approach is used in the flow sufficiently distant from surfaces. A Lagrangian remap scheme is used near surfaces to calculate diffusion and convection of vorticity. A fast multipole technique is utilized for efficient calculation of velocity from the vorticity field. The ability of the method to correctly predict lift and drag forces on simple stationary geometries over a broad range of Reynolds numbers is presented.
Societal needs related to demographics, resources, and human behavior will drive technological advances over the next 20 years. Nanotechnology is anticipated to be an important enabler of these advances, and thus maybe anticipated to have significant influence on new systems approaches to solving societal problems as well as on extending current science and technology-based applications. To examine the potential implications of nanotechnology a societal needs-driven approach is taken. Thus the methodology is to present the definition of the problem, and then examine system concepts, technology issues, and promising future directions. We approach the problem definition from a national and global security perspective and identify three key areas involving the condition of the planet, the human condition, and global security. In anticipating societal issues in the context of revolutionary technologies, such as maybe enabled by nanoscience, the importance of working on the entire life cycle of any technological solution is stressed.
The moduli used in RSA (see [5]) can be generated by many different sources. The generator of that modulus (assuming a single entity generates the modulus) knows its factorization. They would have the ability to forge signatures or break any system based on this moduli. If a moduli and the RSA parameters associated with it were generated by a reputable source, the system would have higher value than if the parameters were generated by an unknown entity. So for tracking, security, confidence and financial reasons it would be beneficial to know who the generator of the RSA modulus was. This is where digital marking comes in. An RSA modulus ia digitally marked, or digitally trade marked, if the generator and other identifying features of the modulus (such as its intended user, the version number, etc.) can be identified and possibly verified by the modulus itself. The basic concept of digitally marking an RSA modulus would be to fix the upper bits of the modulus to this tag. Thus anyone who sees the public modulus can tell who generated the modulus and who the generator believes the intended user/owner of the modulus is.
The free energy barriers of vapor tube formed in a metastable liquid confined between hydrophobic walls is investigated. Monte Carlo simulations, the transition state theory and constrained umbrella sampling techniques are performed to estimate the free energy barrier for vapor tube formation. Transmission coefficients calculated for the liquid layer show that capillary evaporation are also described from the size of a vapor pocket formed between the walls.
The capillary evaporation (cavitation) of water confined between two hydrophobic surfaces in close proximity is analyzed. The water is replaced by vapor due to the presence of bulk energetics and surface energetics. Monte Carlo simulations are performed to determine the effect of water confinement on the dynamics of surface-induced phase transitions. To relate the simulation rates to the experimental data, the mass-conserving Kawasaki algorithms are also performed.
Laser technology has advanced dramatically and is an integral part of today's healthcare delivery system. Lasers are used in the laboratory analysis of human blood samples and serve as surgical tools that kill, burn or cut tissue. Recent semiconductor microtechnology has reduced the size o f a laser to the size of a biological cell or even a virus particle. By integrating these ultra small lasers with biological systems, it is possible to create micro-electrical mechanical systems that may revolutionize health care delivery.
The rating and modeling of photovoltaic PW module performance has been of concern to manufacturers and system designers for over 20 years. Both the National Renewable Energy Laboratory (NREL) and Sandia National Laboratories (SNL) have developed methodologies to predict module and array performance under actual operating conditions. This paper compares the two methods of determining the performance of PV modules, The methods translate module performance to actual or reference conditions using slightly different approaches. The accuracy of both methods is compared for both hourly, daily, and annual energy production over a year of data recorded at NREL in Golden, CO. The comparison of the two methods will be presented for five different PV module technologies.
The Million Solar Roofs Initiative has motivated a renewed interest in the development of utility interconnected photovoltaic (UIPV) inverters. Government-sponsored programs (PVMaT, PVBONUS) and competition among utility interconnected inverter manufacturers have stimulated innovations and improved the performance of existing technologies. With this resurgence, Sandia National Laboratories (SNL) has developed a program to assist industry initiatives to overcome barriers to UIPV inverters. In accordance with newly adopted IEEE 929-2000, the utility interconnected PV inverters are required to cease energizing the utility grid when either a significant disturbance occurs or the utility experiences an interruption in service. Compliance with IEEE 929-2000 is being widely adopted by utilities as a minimum requirement for utility interconnection. This report summarizes work done at the SNL balance-of-systems laboratory to support the development of IEEE 929-2000 and to assist manufacturers in meeting its requirements.
For the last ten years, the Japanese High-Level Nuclear Waste (HLW) repository program has focused on assessing the feasibility of a basic repository concept, which resulted in the recently published H12 Report. As Japan enters the implementation phase, a new organization must identify, screen and choose potential repository sites. Thus, a rapid mechanism for determining the likelihood of site suitability is critical. The threshold approach, described here, is a simple mechanism for defining the likelihood that a site is suitable given estimates of several critical parameters. We rely on the results of a companion paper, which described a probabilistic performance assessment simulation of the HLW reference case in the H12 report. The most critical two or three input parameters are plotted against each other and treated as spatial variables. Geostatistics is used to interpret the spatial correlation, which in turn is used to simulate multiple realizations of the parameter value maps. By combining an array of realizations, we can look at the probability that a given site, as represented by estimates of this combination of parameters, would be good host for a repository site.
