Publications

Fierro, Andrew S.; Faris, Kimberly F.; Lehr, Jane M.

Abstract not provided.

Journal of Physics D: Applied Physics

Lietz, Amanda M.; Barnat, Edward V.; Nail, George R.; Roberds, Nicholas R.; Fierro, Andrew S.; Yee, Benjamin T.; Moore, Christopher H.; Clem, Paul G.; Hopkins, Matthew M.

Understanding the role of physical processes contributing to breakdown is critical for many applications in which breakdown is undesirable, such as capacitors, and applications in which controlled breakdown is intended, such as plasma medicine, lightning protection, and materials processing. The electron emission from the cathode is a critical source of electrons which then undergo impact ionization to produce electrical breakdown. In this study, the role of secondary electron yields due to photons (γ ph) and ions (γ i) in direct current breakdown is investigated using a particle-in-cell direct simulation Monte Carlo model. The plasma studied is a one-dimensional discharge in 50 Torr of pure helium with a platinum cathode, gap size of 1.15 cm, and voltages of 1.2-1.8 kV. The current traces are compared with experimental measurements. Larger values of γ ph generally result in a faster breakdown, while larger values of γ i result in a larger maximum current. The 58.4 nm photons emitted from He(21P) are the primary source of electrons at the cathode before the cathode fall is developed. Of the values of γ ph and γ i investigated, those which provide the best agreement with the experimental current measurements are γ ph = 0.005 and γ i = 0.01. These values are significantly lower than those in the literature for pristine platinum or for a graphitic carbon film which we speculate may cover the platinum. This difference is in part due to the limitations of a one-dimensional model but may also indicate surface conditions and exposure to a plasma can have a significant effect on the secondary electron yields. The effects of applied voltage and the current produced by a UV diode which was used to initiate the discharge, are also discussed.

Journal of Applied Physics

Fierro, Andrew S.; Lehr, Jane; Yee, Benjamin C.; Barnat, Edward V.; Moore, Chris; Hopkins, Matthew M.; Clem, Paul G.

Helium is frequently used as a working medium for the generation of plasmas and is capable of energetic photon emissions. These energetic photon emissions are often attributed to the formation of helium excimer and subsequent photon emission. When the plasma device is exposed to another gas, such as nitrogen, this energetic photon emission can cause photoionization and further ionization wave penetration into the additional gas. Often ignored are the helium resonance emissions that are assumed to be radiation trapped and therefore not pertinent to photoionization. Here, experimental evidence for the presence of helium atomic emission in a pulsed discharge at ten's of Torr is shown. Simulations of a discharge in similar conditions agree with the experimental measurements. In this context, the role of atomic and molecular helium light emission on photoionization of molecular nitrogen in an ionization wave is studied using a kinetic modeling approach that accounts for radiation dynamics in a developing low-temperature plasma. Three different mixtures of helium at a total pressure of 250 Torr are studied in simulation. Photoionization of the nitrogen molecule by vacuum ultraviolet helium emission is used as the only seed source ahead of the ionization front. It is found that even though radiation trapped, the atomic helium emission lines are the significant source of photoionization of nitrogen. The significant effect of radiation trapped photon emission on ionization wave dynamics demonstrates the need to consider these radiation dynamics in plasma reactors where self-absorbed radiation is ignored.

Laity, George R.; Robinson, Allen C.; Cuneo, M.E.; Alam, Mary K.; Beckwith, Kristian B.; Bennett, Nichelle L.; Bettencourt, Matthew T.; Bond, Stephen D.; Cochrane, Kyle C.; Criscenti, Louise C.; Cyr, Eric C.; De Zetter, Karen J.; Drake, Richard R.; Evstatiev, Evstati G.; Fierro, Andrew S.; Gardiner, Thomas A.; Glines, Forrest W.; Goeke, Ronald S.; Hamlin, Nathaniel D.; Hooper, Russell H.; Koski, Jason K.; Lane, James M.; Larson, Steven R.; Leung, Kevin L.; McGregor, Duncan A.; Miller, Philip R.; Miller, Sean M.; Ossareh, Susan J.; Phillips, Edward G.; Simpson, Sean S.; Sirajuddin, David S.; Smith, Thomas M.; Swan, Matthew S.; Thompson, Aidan P.; Tranchida, Julien G.; Bortz-Johnson, Asa J.; Welch, Dale R.; Russell, Alex M.; Watson, Eric D.; Rose, David V.; McBride, Ryan D.

This report describes the high-level accomplishments from the Plasma Science and Engineering Grand Challenge LDRD at Sandia National Laboratories. The Laboratory has a need to demonstrate predictive capabilities to model plasma phenomena in order to rapidly accelerate engineering development in several mission areas. The purpose of this Grand Challenge LDRD was to advance the fundamental models, methods, and algorithms along with supporting electrode science foundation to enable a revolutionary shift towards predictive plasma engineering design principles. This project integrated the SNL knowledge base in computer science, plasma physics, materials science, applied mathematics, and relevant application engineering to establish new cross-laboratory collaborations on these topics. As an initial exemplar, this project focused efforts on improving multi-scale modeling capabilities that are utilized to predict the electrical power delivery on large-scale pulsed power accelerators. Specifically, this LDRD was structured into three primary research thrusts that, when integrated, enable complex simulations of these devices: (1) the exploration of multi-scale models describing the desorption of contaminants from pulsed power electrodes, (2) the development of improved algorithms and code technologies to treat the multi-physics phenomena required to predict device performance, and (3) the creation of a rigorous verification and validation infrastructure to evaluate the codes and models across a range of challenge problems. These components were integrated into initial demonstrations of the largest simulations of multi-level vacuum power flow completed to-date, executed on the leading HPC computing machines available in the NNSA complex today. These preliminary studies indicate relevant pulsed power engineering design simulations can now be completed in (of order) several days, a significant improvement over pre-LDRD levels of performance.

Plasma Sources Science and Technology

Fierro, Andrew S.; Barnat, Edward V.; Moore, Chris; Hopkins, Matthew M.; Clem, Paul G.

Modern computational validation efforts rely on comparison of known experimental quantities such as current, voltage, particle densities, and other plasma properties with the same values determined through simulation. A discrete photon approach for radiation transport was recently incorporated into a particle-in-cell/direct simulation Monte Carlo code. As a result, spatially and temporally resolved synthetic spectra may be generated even for non-equilibrium plasmas. The generation of this synthetic spectra lends itself to potentially new validation opportunities. In this work, initial comparisons of synthetic spectra are made with experimentally gathered optical emission spectroscopy. A custom test apparatus was constructed that contains a 0.5 cm gap distance parallel plane discharge in ultra high purity helium gas (99.9999%) at a pressure of 75 Torr. Plasma generation is initiated with the application of a fast rise-time, 100 ns full-width half maximum, 2.0 kV voltage pulse. Transient electrical diagnostics are captured along with time-resolved emission spectra. A one-dimensional simulation is run under the same conditions and compared against the experiment to determine if sufficient physics are included to model the discharge. To sync the current measurements from experiment and simulation, significant effort was undertaken to understand the kinetic scheme required to reproduce the observed features. Additionally, the role of the helium molecule excimer emission and atomic helium resonance emission on photocurrent from the cathode are studied to understand which effect dominates photo-feedback processes. Results indicate that during discharge development, atomic helium resonance emission dominates the photo-flux at the cathode even though it is strongly self-absorbed. A comparison between the experiment and simulation demonstrates that the simulation reproduces observed features in the experimental discharge current waveform. Furthermore, the synthesized spectra from the kinetic method produces more favorable agreement with the experimental data than a simple local thermodynamic equilibrium calculation and is a first step towards using spectra generated from a kinetic method in validation procedures. The results of this study produced a detailed compilation of important helium plasma chemistry reactions for simulating transient helium plasma discharges.

Fierro, Andrew S.; Yee, Benjamin T.; Hopkins, Matthew M.; Robinson, Allen C.; Laity, George R.

Abstract not provided.

Roberds, Nicholas R.; Hopkins, Matthew M.; Yee, Benjamin T.; Fierro, Andrew S.

Abstract not provided.

Proceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV

Fierro, Andrew S.; Barnat, Edward V.; Moore, Christopher H.; Clem, Paul G.; Hopkins, Matthew M.

The influence of different quantum yields for photons and secondary emission yields for ions striking a surface is investigated. Using a one-dimensional particle-in-cell simulation, these secondary emission coefficients are varied to observe the impact on discharge current. The discharge is assumed to occur in pure helium gas at a pressure of 75 torr. To handle binary particle interactions, the Direct Simulation Monte Carlo (DSMC) method is utilized. The model includes electron-neutral interactions, neutral-neutral interactions, and photon-neutral interactions. It is observed that the discharge current in the early stages of discharge is heavily dependent upon the quantum yield due to photon impact. In the later stages of discharge, the current depends on both the quantum yield and secondary emission coefficient for ion impact.

Jindal, Ashish K.; Moore, Christopher H.; Fierro, Andrew S.; Hopkins, Matthew M.

Abstract not provided.

Plasma Sources Science and Technology

Fierro, Andrew S.; Moore, Chris; Yee, Ben; Hopkins, Matthew M.

A fully resolved kinetic model (particle-in-cell and direct simulation Monte Carlo for particle/photon collisions) of a near atmospheric pressure ionization wave is presented here. Fully resolving the required numerical spatial (sub-μm) and temporal scales (tens of fs) for atmospheric pressure discharges in three-dimensions is still a challenging task on modern super computers. To keep the overall problem tractable, the total number of elements are reduced by only simulating a 10° wedge rather than a full 360° geometry. The ionization wave is generated in a needle-plane configuration with a gap size of 250 μm and a background of nitrogen and helium gas. A voltage of 1500 V is applied to the anode and an initial electron and ion density of 109 cm-3 is seeded in a region near the anode electrode tip and extending towards the cathode. As these initial electrons are swept away, photoionization and photoemission create new electrons and allow the ionization front to propagate towards the cathode. Results from the 90% N2, 10% He discharge indicate that photoionization has minimal impact on plasma formation processes and cathode photoemission is the dominant mechanism for new electrons. In the 90% He, 10% N2 discharge case, however, photoionization likely has an impact as the observed locations of photoionization occur far enough away from the ionization front to allow for sufficient avalanche processes that contribute to the propagation of the ionization wave. Additionally, the electron energy distribution functions in the 90% He, 10% N2 case indicate that there is less energy loss to the low lying molecular N2 electronic states as well as the vibrational and rotational modes. This leads to higher electron energies and faster plasma development times of ∼0.4 ns for the 90% He, 10% N2 case, and ∼1.5 ns for the 90% N2, 10% He case. In addition to analysis of the ionization wave results, the overall challenges associated with simulations near atmospheric pressure discharges in three-dimensions are discussed, including the limitations of the 10° wedge that produces, at least qualitatively, minimal 3D effects.

Fierro, Andrew S.; Moore, Christopher H.; Hopkins, Matthew M.; Barnat, Edward V.; Clem, Paul G.

Abstract not provided.

Hopkins, Matthew M.; Fierro, Andrew S.; Nail, George N.; Barnat, Edward V.

Abstract not provided.

Moore, Christopher H.; Chow, Weng W.; Fierro, Andrew S.

Abstract not provided.

Laity, George R.; Aragon, Carlos A.; Bennett, Nichelle L.; Bliss, David E.; Dolan, Daniel H.; Fierro, Andrew S.; Gomez, Matthew R.; Hess, Mark H.; Hutsel, Brian T.; Jennings, Christopher A.; Johnston, Mark D.; Kossow, Michael R.; Lamppa, Derek C.; Martin, Matthew; Patel, Sonal P.; Porwitzky, Andrew J.; Robinson, Allen C.; Rose, David V.; VanDevender, Pace V.; Waisman, Eduardo M.; Webb, Timothy J.; Welch, Dale R.; Rochau, G.A.; Savage, Mark E.; Stygar, William S.; White, William M.; Sinars, Daniel S.; Cuneo, M.E.

Abstract not provided.

Fierro, Andrew S.; Moore, Christopher H.; Hopkins, Matthew M.; Barnat, Edward V.; Clem, Paul G.

Abstract not provided.

Moore, Christopher H.; Pouvesle, Jean-Michel P.; Robert, Eric R.; Bourdon, Anne B.; Fierro, Andrew S.; Jindal, Ashish K.; Hopkins, Matthew M.

Abstract not provided.

Jindal, Ashish K.; Moore, Christopher H.; Fierro, Andrew S.; Hopkins, Matthew M.

Abstract not provided.

Moore, Christopher H.; Hopkins, Matthew M.; Fierro, Andrew S.; Moore, Christopher H.; Yee, Benjamin T.

Abstract not provided.

Fierro, Andrew S.; Barnat, Edward V.; Moore, Christopher H.; Hopkins, Matthew M.

Abstract not provided.

Moore, Christopher H.; Chow, Weng W.; Fierro, Andrew S.

Abstract not provided.

Yee, Benjamin T.; Barnat, Edward V.; Bentz, Brian Z.; Fierro, Andrew S.

Abstract not provided.

Fierro, Andrew S.; Laity, George R.; Jennings, Christopher A.; Bennett, Nichelle L.; Hess, Mark H.; Hutsel, Brian T.; Hopkins, Matthew M.; Robinson, Allen C.; Pointon, Timothy D.; Vandevender, J.P.; Cartwright, Keith C.

Abstract not provided.

Fierro, Andrew S.; Moore, Christopher H.; Chow, Weng W.; Hopkins, Matthew M.

Abstract not provided.

Barnat, Edward V.; Fierro, Andrew S.

Abstract not provided.

Barnat, Edward V.; Fierro, Andrew S.

Abstract not provided.