Publications

19 Results
Skip to search filters

Numerical simulation of a relativistic magnetron using a fluid electron model

Physics of Plasmas

Roberds, Nicholas R.; Cartwright, Keith C.; Sandoval, Andrew J.; Beckwith, Kristian B.; Cyr, Eric C.; Glines, Forrest W.

An approach to numerically modeling relativistic magnetrons, in which the electrons are represented with a relativistic fluid, is described. A principal effect in the operation of a magnetron is space-charge-limited (SCL) emission of electrons from the cathode. We have developed an approximate SCL emission boundary condition for the fluid electron model. This boundary condition prescribes the flux of electrons as a function of the normal component of the electric field on the boundary. We show the results of a benchmarking activity that applies the fluid SCL boundary condition to the one-dimensional Child–Langmuir diode problem and a canonical two-dimensional diode problem. Simulation results for a two-dimensional A6 magnetron are then presented. Computed bunching of the electron cloud occurs and coincides with significant microwave power generation. Numerical convergence of the solution is considered. Sharp gradients in the solution quantities at the diocotron resonance, spanning an interval of three to four grid cells in the most well-resolved case, are present and likely affect convergence.

More Details

Electrostatic Relativistic Fluid Models of Electron Emission in a Warm Diode

IEEE International Conference on Plasma Science (ICOPS)

Hamlin, Nathaniel D.; Smith, Thomas M.; Roberds, Nicholas R.; Glines, Forrest W.; Beckwith, Kristian B.

A semi-analytic fluid model has been developed for characterizing relativistic electron emission across a warm diode gap. Here we demonstrate the use of this model in (i) verifying multi-fluid codes in modeling compressible relativistic electron flows (the EMPIRE-Fluid code is used as an example; see also Ref. 1), (ii) elucidating key physics mechanisms characterizing the influence of compressibility and relativistic injection speed of the electron flow, and (iii) characterizing the regimes over which a fluid model recovers physically reasonable solutions.

More Details

The influence of surface impurities on photoelectric currents driven by intense soft x rays

Physics of Plasmas

Roberds, Nicholas R.

In an x-ray driven cavity experiment, an intense flux of soft x rays on the emitting surface produces significant emission of photoelectrons having several kiloelectronvolts of kinetic energy. At the same time, rapid heating of the emitting surface occurs, resulting in the release of adsorbed surface impurities and subsequent formation of an impurity plasma. This numerical study explores a simple model for the photoelectric currents and the impurity plasma. Attention is given to the effect of varying the composition of the impurity plasma. The presence of protons or hydrogen molecular ions leads to a substantially enhanced cavity current, while heavier plasma ions are seen to have a limited effect on the cavity current due to their lower mobility. Additionally, it is demonstrated that an additional peak in the current waveform can appear due to the impurity plasma. A correlation between the impurity plasma composition and the timing of this peak is elucidated.

More Details

High-fidelity modeling of breakdown in helium: Initiation processes and secondary electron emission

Journal of Physics D: Applied Physics

Lietz, Amanda M.; Barnat, Edward V.; Nail, George R.; Roberds, Nicholas R.; Fierro, Andrew S.; Yee, Benjamin T.; Moore, Christopher H.; Clem, Paul G.; Hopkins, Matthew M.

Understanding the role of physical processes contributing to breakdown is critical for many applications in which breakdown is undesirable, such as capacitors, and applications in which controlled breakdown is intended, such as plasma medicine, lightning protection, and materials processing. The electron emission from the cathode is a critical source of electrons which then undergo impact ionization to produce electrical breakdown. In this study, the role of secondary electron yields due to photons (γ ph) and ions (γ i) in direct current breakdown is investigated using a particle-in-cell direct simulation Monte Carlo model. The plasma studied is a one-dimensional discharge in 50 Torr of pure helium with a platinum cathode, gap size of 1.15 cm, and voltages of 1.2-1.8 kV. The current traces are compared with experimental measurements. Larger values of γ ph generally result in a faster breakdown, while larger values of γ i result in a larger maximum current. The 58.4 nm photons emitted from He(21P) are the primary source of electrons at the cathode before the cathode fall is developed. Of the values of γ ph and γ i investigated, those which provide the best agreement with the experimental current measurements are γ ph = 0.005 and γ i = 0.01. These values are significantly lower than those in the literature for pristine platinum or for a graphitic carbon film which we speculate may cover the platinum. This difference is in part due to the limitations of a one-dimensional model but may also indicate surface conditions and exposure to a plasma can have a significant effect on the secondary electron yields. The effects of applied voltage and the current produced by a UV diode which was used to initiate the discharge, are also discussed.

More Details

Sawtooth oscillation behavior with varying amounts of applied stellarator rotational transform

Physics of Plasmas

Herfindal, Jeffery L.; Maurer, David A.; Hartwell, Greg J.; Ennis, David A.; Hanson, James D.; Knowlton, Stephen F.; Xinxing, Ma X.; Pandya, Mihir D.; Roberds, Nicholas R.; Traverso, Peter J.

Tokamak-like sawtooth oscillations are observed in the Compact Toroidal Hybrid (CTH), a current-carrying stellarator. CTH has the unique ability to change the amount of the applied vacuum rotational transform from external stellarator coils relative to the rotational transform generated by the internal plasma current to investigate the effects of strong three-dimensional magnetic shaping on sawtooth behavior. The observed sawteeth in CTH, for plasmas with monotonically decreasing rotational transform profiles dominated by the plasma current, have characteristics of those observed on tokamaks including (1) a central emissivity rise and then a sudden crash with a well-defined inversion radius, (2) the presence of an m = 1 emissivity fluctuation, and (3) the normalized inversion surface radius scales with the total edge rotational transform. We explore the properties of an ensemble of discharges in CTH in which the fractional rotational transform, defined as the vacuum rotational transform divided by the total rotational transform, is systematically varied from 0.04 to 0.42 to observe changes in sawtooth oscillation dynamics. Over this range of the fractional rotational transform, the measured sawtooth period decreased by a factor of two. At a high fractional rotational transform, the sawtooth amplitude is observed to consist of only low-amplitude oscillations while the measured crash time of the sawtooth oscillation does not appear to have a strong dependence on the amount of the fractional transform applied. Experimental results indicate that the low-amplitude sawteeth are accompanied by a decrease in the sawtooth period and predominantly correlated with the mean elongation (due to the increasing fractional rotational transform) of the non-axisymmetric plasmas within CTH rather than other global equilibrium parameters.

More Details
19 Results
19 Results