Publications

Results 1–25 of 35
Skip to search filters

Optical Imaging on Z LDRD: Design and Development of Self-Emission and Debris Imagers

Yager-Elorriaga, David A.; Montoya, Michael M.; Bliss, David E.; Ball, Christopher R.; Atencio, Phillip M.; Carpenter, Brian C.; Fuerschbach, Kyle H.; Fulford, Karin W.; Lamppa, Derek C.; Lowinske, Michael C.; Lucero, Larry M.; Patel, Sonal P.; Romero, Anthony R.; Tanbakuchi, Anthony; Breznik-Young, Bonnie B.

We present an overview of the design and development of optical self-emission and debris imaging diagnostics for the Z Machine at Sandia National Laboratories. These diagnostics were designed and implemented to address several gaps in our understanding of visibly emitting phenomenon on Z and the post-shot debris environment. Optical emission arises from plasmas that form on the transmission line that delivers energy to Z loads and on the Z targets themselves; however, the dynamics of these plasmas are difficult to assess without imaging data. Addressing this, we developed a new optical imager called SEGOI (Self-Emission Gated Optical Imager) that leverages the eight gated optical imagers and two streak cameras of the Z Line VISAR system. SEGOI is a low cost, side-on imager with a 1 cm field of view and 30-50 µm spatial resolution, sensitive to green light (540-600 nm). This report outlines the design considerations and development of this diagnostic and presents an overview of the first diagnostic data acquired from four experimental campaigns. SEGOI was fielded on power flow experiments to image plasmas forming on and between transmission lines, on an inertial confinement fusion experiment called the Dynamic Screw Pinch to image low density plasmas forming on return current posts, on an experiment designed to measure the magneto Rayleigh-Taylor instability to image the instability bubble trajectory and self-emission structures, and finally on a Magnetized Liner Inertial Fusion (MagLIF) experiment to image the emission from the target. The second diagnostic developed, called DINGOZ (Debris ImagiNG on Z), was designed to improve our understanding of the post-shot debris environment. DINGOZ is an airtight enclosure that houses electronics and batteries to operate a high-speed (10-400 kfps) camera in the Z Machine center section. We report on the design considerations of this new diagnostic and present the first high-speed imaging data of the post-shot debris environment on Z.

More Details

Experimental methods for laboratory measurements of helium spectral line broadening in white dwarf photospheres

Physics of Plasmas

Schaeuble, Marc-Andre S.; Nagayama, Taisuke N.; Bailey, James E.; Dunlap, B.H.; Patel, Sonal P.

White Dwarf (WD) stars are the most common stellar remnant in the universe. WDs usually have a hydrogen or helium atmosphere, and helium WD (called DB) spectra can be used to solve outstanding problems in stellar and galactic evolution. DB origins, which are still a mystery, must be known to solve these problems. DB masses are crucial for discriminating between different proposed DB evolutionary hypotheses. Current DB mass determination methods deliver conflicting results. The spectroscopic mass determination method relies on line broadening models that have not been validated at DB atmosphere conditions. We performed helium benchmark experiments using the White Dwarf Photosphere Experiment (WDPE) platform at Sandia National Laboratories' Z-machine that aims to study He line broadening at DB conditions. Using hydrogen/helium mixture plasmas allows investigating the importance of He Stark and van der Waals broadening simultaneously. Accurate experimental data reduction methods are essential to test these line-broadening theories. In this paper, we present data calibration methods for these benchmark He line shape experiments. We give a detailed account of data processing, spectral power calibrations, and instrument broadening measurements. Uncertainties for each data calibration step are also derived. We demonstrate that our experiments meet all benchmark experiment accuracy requirements: WDPE wavelength uncertainties are <1 Å, spectral powers can be determined to within 15%, densities are accurate at the 20% level, and instrumental broadening can be measured with 20% accuracy. Fulfilling these stringent requirements enables WDPE experimental data to provide physically meaningful conclusions about line broadening at DB conditions.

More Details

Preliminary schlieren and optical emission diagnostics of a high-voltage laser triggered switch

AIAA Aviation 2019 Forum

Rose, Charles; Yalin, Azer P.; Simpson, Sean S.; Patel, Sonal P.

We present the setup and preliminary diagnostic measurements of an optically accessible high-voltage laser trigger switch (HV-LTS) operating with zero air and millimeter gap lengths. The switch is utilized as a test bed to collect electrical and optical measurements to inform recently discovered gaps in the Tom Martin switch model. We present the basic theory of this model including key assumptions on the radial plasma channel growth and constant electrical conductivity. Characteristic electrical measurements of the switch are presented including: self-break curve, minimum laser energy to trigger with ~100% reliability for various set voltages, and equivalent circuit resistance and inductance. Schlieren images are presented of the temporal blast wave associated with laser triggering, as well as switch closure plasma. Radial plasma growth is measured and found to agree with the Martin model assumptions, albeit with variability yielding a potential error in calculated resistance of ~15%. Optical emission spectra of switch closure are also recorded and show the spectra to be dominated by continuum at early times with emission lines becoming visible at ~200 ns after a 25 kV shot and ~500 ns after a 100 kV shot. This data, to the best of the author’s knowledge, represents the first publication of HV-LTS emission spectra.

More Details

Shielding of the azimuthal magnetic field by the anode plasma in a relativistic self-magnetic-pinch diode

Physics of Plasmas

Biswas, S.; Johnston, Mark D.; Doron, R.; Mikitchuk, D.; Maron, Yitzhak M.; Patel, Sonal P.; Kiefer, Mark L.; Cuneo, M.E.

In relativistic electron beam diodes, the self-generated magnetic field causes electron-beam focusing at the center of the anode. Generally, plasma is formed all over the anode surface during and after the process of the beam focusing. In this work, we use visible-light Zeeman-effect spectroscopy for the determination of the magnetic field in the anode plasma in the Sandia 10 MV, 200 kA (RITS-6) electron beam diode. The magnetic field is determined from the Zeeman-dominated shapes of the Al III 4s-4p and C IV 3s-3p doublet emissions from various radial positions. Near the anode surface, due to the high plasma density, the spectral line-shapes are Stark-dominated, and only an upper limit of the magnetic field can be determined. The line-shape analysis also yields the plasma density. The data yield quantitatively the magnetic-field shielding in the plasma. The magnetic-field distribution in the plasma is compared to the field-diffusion prediction and found to be consistent with the Spitzer resistivity, estimated using the electron temperature and charge-state distribution determined from line intensity ratios.

More Details

Recent Diagnostic Platform Accomplishments for Studying Vacuum Power Flow Physics at the Sandia Z Accelerator

Laity, George R.; Aragon, Carlos A.; Bennett, Nichelle L.; Bliss, David E.; Dolan, Daniel H.; Fierro, Andrew S.; Gomez, Matthew R.; Hess, Mark H.; Hutsel, Brian T.; Jennings, Christopher A.; Johnston, Mark D.; Kossow, Michael R.; Lamppa, Derek C.; Martin, Matthew; Patel, Sonal P.; Porwitzky, Andrew J.; Robinson, Allen C.; Rose, David V.; VanDevender, Pace V.; Waisman, Eduardo M.; Webb, Timothy J.; Welch, Dale R.; Rochau, G.A.; Savage, Mark E.; Stygar, William S.; White, William M.; Sinars, Daniel S.; Cuneo, M.E.

Abstract not provided.

Measuring Plasma Formation Field Strength and Current Loss in Pulsed Power Diodes

Johnston, Mark D.; Patel, Sonal P.; Falcon, Ross E.; Cartwright, Keith C.; Kiefer, Mark L.; Cuneo, M.E.; Maron, Yitzhak M.

This LDRD investigated plasma formation, field strength, and current loss in pulsed power diodes. In particular the Self-Magnetic Pinch (SMP) e-beam diode was studied on the RITS-6 accelerator. Magnetic fields of a few Tesla and electric fields of several MV/cm were measured using visible spectroscopy techniques. The magnetic field measurements were then used to determine the current distribution in the diode. This distribution showed that significant beam current extends radially beyond the few millimeter x-ray focal spot diameter. Additionally, shielding of the magnetic field due to dense electrode surface plasmas was observed, quantified, and found to be consistent with the calculated Spitzer resistivity. In addition to the work on RITS, measurements were also made on the Z-machine looking to quantify plasmas within the power flow regions. Measurements were taken in the post-hole convolute and final feed gap regions on Z. Dopants were applied to power flow surfaces and measured spectroscopically. These measurements gave species and density/temperature estimates. Preliminary B-field measurements in the load region were attempted as well. Finally, simulation work using the EMPHASIS, electromagnetic particle in cell code, was conducted using the Z MITL conditions. The purpose of these simulations was to investigate several surface plasma generations models under Z conditions for comparison with experimental data.

More Details
Results 1–25 of 35
Results 1–25 of 35