Publications

Abstract not provided.

Abstract not provided.

Ice-mass change induces regionally varying patterns of sea-level change due to gravitational, rotational, and deformational (GRD) effects, which in turn influence marine-based ice stability in Antarctica. For improved projection of the Antarctic Ice Sheet (AIS), there is a need for including GRD effects in modeling and improving understanding of basin-by-basin sensitivity of ice evolution to GRD effects under a range of climate scenarios. We couple a high-resolution, higher-order ice-sheet model with a 1D global sea-level model that fully captures GRD effects, and simulate ice evolution in Antarctica under the Ice Sheet Model Intercomparison Project for CMIP6 experiments. We perform two sets of coupled simulations incorporating 1D Maxwell solid Earth structure suitable for West and East Antarctica and show that the Amundsen Sea Embayment (ASE) in West Antarctica has the highest sensitivity to GRD effects—in high-emission scenarios, grounding-line retreat accelerates by hundreds of kilometers by 2300 without GRD effects, but GRD effects delay this retreat on a timescale of decades. However, we find that delay times do not show a clear relationship to the strength of climate forcing alone. Furthermore, GRD effects can influence ice-sheet dynamics more than the choice of climate model for a given emissions scenario. In contrast, East Antarctica exhibits minimal sensitivity to GRD effects throughout the study period. These findings underscore the critical role of GRD effects in shaping future West AIS evolution, highlighting the importance of constraining the regional 3D Earth structure and bed topography in West Antarctica, particularly the ASE.

Abstract not provided.

Abstract not provided.

The motivation for the experiments reported here pertains to the siting of Liquefied Natural Gas (LNG) facilities which requires assessing the potential adverse radiant thermal impacts of accidental fires on the public. The objective is to obtain data on jet fires, pool fires, fireballs, and concrete walls that could serve as thermal barriers for model validation. The fuels tested include ethane, ethylene, propane, and isopentane.

Electrical characterization of Al doped SrTiO3 nanoparticles by undergraduate intern Aaron Coll

Abstract not provided.

This is the level 3 milestone report (M3) for the workpackage SF-25SN01030407 in the Geologic Disposal Safety Assessment (GDSA) program.

​​This white paper describes ongoing work and portfolios at Sandia National Laboratories that could be leveraged in AI for electric grid applications. This document highlights several areas where Sandia has developed capabilities that can be used in future work. These areas are human factors, uncertainty quantification, explainability, and trust maturity frameworks.

Abstract not provided.

Prussian blue analogues (PBAs) have attracted increasing interest owing to their potential applications in various fields such as energy storage and conversion, neuromorphic computing, and magnetic switching. With a general formula of AxMN[MC(CN)6], they feature an open framework that provides abundant channels for diffusion of alkali metal ions A and allows flexible compositional control of transition metal ions MNand MC. The oxidation states of transition metal ions can be tuned by adjusting the amount (x) of alkali ions A. Here, we carried out density functional theory calculations combined with experimental measurements to investigate the effects of transition metal ions, alkali ions, and oxidation states on the electronic properties of PBAs. Our calculations found that the band gaps of PBAs can be tuned from close to 0 eV to more than 4 eV. Experimentally, we introduced the synthesis/characterization of five previously unreported PBAs (MN= Ru, Os; MC= Fe, Ru, and Os) to complete the nine stable MN:MCtransition metal combinations in group VIII of the periodic table. The optically measured intervalence charge transfer excitation energies of group VIII PBAs are consistent with calculated band gaps. They demonstrate wide band gap tunability by adjusting transition metals and oxidation states, enabling semiconductor-to-metal transitions for memristor applications and enhancing electronic conductivity for battery applications. This work provides a computational/experimental database of electronic properties versus structural compositions for PBAs.

As with other oscillatory power conversion systems, the design of wave energy converters can be understood as an impedance matching problem. By representing the wave energy converter as a multi-port network, two separate but related impedance matching conditions can be established. Satisfying these conditions maximizes power transfer to the load. In practice, these impedance matching conditions may be used to influence the design of the system (including the hull, power take-off, controller, mooring, etc.). To this end, this paper considers some example applications of wave energy converter design with the help of the impedance matching framework.

The June 1991 Mt. Pinatubo eruption resulted in a massive increase of sulfate aerosols in the atmosphere, absorbing radiation and leading to global changes in surface and stratospheric temperatures. A volcanic eruption of this magnitude serves as a natural analog for stratospheric aerosol injection, a proposed solar radiation modification method to combat a warming climate. The impacts of such an event are multifaceted and region-specific. Our goal is to characterize the multivariate and dynamic nature of the atmospheric impacts following the Mt. Pinatubo eruption. We developed a multivariate space-time dynamic linear model to understand the full extent of the spatially- and temporally-varying impacts. Specifically, spatial variation is modeled using a flexible set of basis functions for which the basis coefficients are allowed to vary in time through a vector autoregressive (VAR) structure. This novel model is cast in a Dynamic Linear Model (DLM) framework and estimated via a customized MCMC approach. We demonstrate how the model quantifies the relationships between key atmospheric parameters prior to and following the Mt. Pinatubo eruption with reanalysis data from MERRA-2 and highlight when such a model is advantageous over univariate models.

Topological insulators are characterized by insulating bulk states and robust metallic surface states. Band inversion is a hallmark of topological insulators. At time-reversal invariant points in the Brillouin zone, spin–orbit coupling (SOC) induces a swapping of orbital character at the bulk band edges. Reliably detecting band inversion in solid-state systems with many-body methods would aid in identifying possible candidates for spintronics and quantum computing applications and improve our understanding of the physics behind topologically nontrivial systems. Density functional theory (DFT) methods are a well-established means of investigating these interesting materials due to their favorable balance of computational cost and accuracy but often struggle to accurately model the electron–electron correlations present in the many materials containing heavier elements. In this work, we develop a novel method to detect band inversion within continuum quantum Monte Carlo (QMC) methods that can accurately treat the electron correlation and spin–orbit coupling that are crucial to the physics of topological insulators. Our approach applies a momentum-space-resolved atomic population analysis throughout the first Brillouin zone utilizing the Löwdin method and the one-body reduced density matrix produced with diffusion Monte Carlo (DMC). We integrate this method into QMCPACK, an open source ab initio QMC package, so that these ground-state methods can be used to complement experimental studies and validate prior DFT work on predicting the band structures of correlated topological insulators. We demonstrate this new technique on the topological insulator bismuth telluride, which displays band inversion between its Bi-p and Te-p states at the Γ-point. We show an increase in charge on the bismuth-p orbital and a decrease in charge on the tellurium-p orbital when comparing band structures with and without SOC. Additionally, we use our method to compare the degree of band inversion present in monolayer Bi2Te3, which has no interlayer van der Waals interactions, to that seen in the bilayer and bulk. The method presented here will enable future many-body studies of band inversion that can shed light on the delicate interplay between correlation and topology in correlated topological materials.

The June 1991 Mt. Pinatubo eruption resulted in a massive increase of sulfate aerosols in the atmosphere, absorbing radiation and leading to global changes in surface and stratospheric temperatures. A volcanic eruption of this magnitude serves as a natural analog for stratospheric aerosol injection, a proposed solar radiation modification method to combat a warming climate. The impacts of such an event are multifaceted and region-specific. Our goal is to characterize the multivariate and dynamic nature of the atmospheric impacts following the Mt. Pinatubo eruption. We developed a multivariate space-time dynamic linear model to understand the full extent of the spatially- and temporally-varying impacts. Specifically, spatial variation is modeled using a flexible set of basis functions for which the basis coefficients are allowed to vary in time through a vector autoregressive (VAR) structure. This novel model is cast in a Dynamic Linear Model (DLM) framework and estimated via a customized MCMC approach. We demonstrate how the model quantifies the relationships between key atmospheric parameters prior to and following the Mt. Pinatubo eruption with reanalysis data from MERRA-2 and highlight when such a model is advantageous over univariate models.

State-of-the-art noisy-intermediate-scale quantum processors are currently implemented across a variety of hardware platforms, each with their own distinct gatesets. As such, circuit compilation should not only be aware of but also deeply connect to the native gateset and noise properties of each. Trapped-ion processors are one such platform that provides a gateset that can be continuously parameterized across both one- and two-qubit gates. Here we use the Quantum Scientific Computing Open User Testbed to study noise-aware compilations focused on continuously parameterized two-qubit ZZ gates (based on the Mølmer-Sørensen interaction) using superstaq, a quantum software platform for hardware-aware circuit compiler optimizations. We discuss the realization of ZZ gates with arbitrary angle on the all-to-all connected trapped-ion system. Then we discuss a variety of different compiler optimizations that innately target these ZZ gates and their noise properties. These optimizations include moving from a restricted maximally entangling gateset to a continuously parameterized one, swap mirroring to further reduce the total entangling angle of the operations, focusing the heaviest ZZ angle participation on the best-performing gate pairs, and circuit approximation to remove the least impactful ZZ gates. We demonstrate these compilation approaches on the hardware with randomized quantum volume circuits, observing the potential to realize a larger quantum volume as a result of these optimizations. Using differing yet complementary analysis techniques, we observe the distinct improvements in system performance provided by these noise-aware compilations and study the role of stochastic and coherent error channels for each compilation choice.

Abstract not provided.

New concepts of symmetry related to topological order emerged from the discovery of the fractional quantum Hall effect and high-temperature superconductivity in strongly correlated electron systems. This led to the study of quantum materials-- materials exhibiting emergent quantum phenomena with no classical analogues. While these materials have engendered exciting basic materials science and physics, realizing novel devices is a key challenge in the field. The goal of this proposal is to harnes

Abstract not provided.

This report provides quantitative estimates of the potential economic effects on storage, transport, and disposal of high assay low-enriched uranium spent fuel. It builds on a previous report that described these economic effects qualitatively.

While amorphous materials are often approximated to have a statistically homogeneous atomic structure, they frequently exhibit localized structural heterogeneity that challenges simplified models. This study uses 4D scanning transmission electron microscopy to investigate the strain and structural modifications around gas bubbles in amorphous Bi2O3 induced by argon irradiation. We present a method for determining strain fields surrounding bubbles that can be used to measure the internal pressure of the gas. Compressive strain is observed around the cavities, with higher-order crystalline symmetries emerging near the cavity interfaces, suggesting paracrystalline ordering as a result of bubble coarsening. This ordering, along with a compressive strain gradient, indicates that gas bubbles induce significant localized changes in atomic packing. By analyzing strain fields with maximum compressive strains of 3%, we estimate a lower bound on the internal pressure of the bubbles at 2.5 GPa. These findings provide insight into the complex structural behavior of amorphous materials under stress, particularly in systems with gas inclusions, and offer new methods for probing the local atomic structure in disordered materials. Although considering structural heterogeneity in amorphous systems is non-trivial, these features have crucial impacts on material functionalities, such as mechanical strength, ionic conductivity, and electronic mobility.

Abstract not provided.

New concepts of symmetry related to topological order emerged from the discovery of the fractional quantum Hall effect and high-temperature superconductivity in strongly correlated electron systems. This led to the study of quantum materials-- materials exhibiting emergent quantum phenomena with no classical analogues. While these materials have engendered exciting basic materials science and physics, realizing novel devices is a key challenge in the field. The goal of this proposal is to harnes

Abstract not provided.