The socioeconomic impacts of pipeline incidents have escalated over the past three decades, revealing the limitation of traditional risk modeling methods when applied to extensive pipeline networks. This research aims to develop machine learning (ML) models that effectively identify, rank, and predict the diverse hazards and socioeconomic consequences associated with pipeline incidents. Utilizing historical data on pipeline incidents alongside weather and oceanographic data from the 1980s onward, the Houston metropolitan area serves as a testbed for the proposed methodologies. The research segments the combined datasets into three consecutive periods, demonstrating the efficacy of the updated model in predicting future events, particularly concerning precipitation rate data. Despite the challenges posed by a relatively limited dataset, local-level ML modeling offers valuable insights into the spatial and temporal dynamics of multiple hazards that contribute to pipeline incidents. These findings hold significant implications for future research, particularly in understanding and mitigating risks in various locations across the Gulf Coast and other coastal regions.
The synthesis of Lanthanum Cobalt Oxide (LCO) via Sol-Gel method provides a potentially low-cost method of production for a P-type photocatalytic. LCO was prepped from Lanthanum and Nitrate Precursors in Aqueous solution. After a significant amount of water is evaporated, the solution is deposited onto SiO2 substrate via spin-deposition method. After annealing, the samples produce thin film LCO that display thickness of sub-500 nanometers. The samples material profile is confirmed by both Raman spectroscopy and X-Ray Diffraction spectroscopy (XRD). Additionally, two-point probing tested the conductivity of the samples. The thin film samples display characteristics of a P-type photocatalytic and may potentially be used in the formation of a P-N junction for user in water-splitting applications.
Photonic computing has the potential to harness the full degrees of freedom (DOFs) of the light field, including the wavelength, spatial mode, spatial location, phase quadrature, and polarization, to achieve a higher level of computing parallelism and scalability than digital electronic processors. While multiplexing using the wavelength and other DOFs can be readily integrated on silicon photonics platforms with compact footprints, conventional mode-division multiplexed (MDM) photonic designs occupy areas exceeding tens to hundreds of microns for a few spatial modes, significantly limiting their scalability. Here, we utilize inverse design to demonstrate an ultracompact photonic computing core that calculates vector dot products based on MDM coherent mixing. Our dot-product core integrates the functionalities of two-mode multiplexers and one multimode coherent mixer within a nominal footprint of 5 μm x 3 μm . We have experimentally demonstrated computing examples on the fabricated dot-product core, including complex number multiplication and motion estimation using optical flow. The compact dot-product core design enables large-scale on-chip integration in a parallel photonic computing primitive cluster for high-throughput scientific computing and computer vision tasks.
Photonic Doppler Velocimetry (PDV) is a diagnostic commonly used in shock physics and dynamic compression experiments to reliably get velocity information from experiments. In PDV systems, a common method of reducing experimental cost is to use time and frequency multiplexing to increase the number of PDV probes. With time multiplexing, interference between probes is a frequent problem. In this report, we look at using a high-speed optical switch to reduce this interference, including measuring the amount of interference generated to determine if it has the potential to affect experiments and integrating a time multiplexing system into an experiment. We find that, when applied to PDV systems, there is approximately (-23.4 ± 0.9) dB of interference measured in the short time Fourier transform between switch inputs. When an optical switch based time multiplexing system was integrated into a dynamic compression experiment, the system was able to successfully combine the signals from four different PDV probes onto a single optical cable without unacceptable levels of interference in the spectrogram. An optical switch based time multiplexing system appears to be a promising method for reducing the cost of fielding larger numbers of PDV probes in an experiment.
The Magos SR-1000 is a ground surveillance radar with an advertised detection range up to 1000 meters for a walker, vehicle, or boat at a low power consumption of 11 Watts. Figure 1 shows the Magos SR-1000 installed at Sandia’s Security Technology Test and Evaluation Center (STEC); testing was performed from May-July 2024. Figure 2 shows a close-up of the device.
Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Fjeldsted, Aaron P.; Morrow, Tyler; Scott, Clayton; Zhu, Yilun; Holland, Darren E.; Hanks, Ephraim M.; Wolfe, Douglas E.
The adoption of machine learning approaches for gamma-ray spectroscopy has received considerable attention in the literature. Many studies have investigated the deployment of various algorithm architectures to a specific task. However, little attention has been afforded to the development of the datasets leveraged to train the models. Such training datasets typically span a set of environmental or detector parameters to encompass a problem space of interest to a user. Variations in these measurement parameters will also induce fluctuations in the detector response, including expected pile-up and ground scatter effects. Fundamental to this work is the understanding that 1) the underlying spectral shape varies as the measurement parameters change and 2) the statistical uncertainties associated with two spectra impact their level of similarity. While previous studies attribute some arbitrary discretization to the measurement parameters for the generation of their synthetic training data, this work introduces a principled methodology for efficient spectral-based discretization of a problem space. A signal-to-noise ratio (SNR) respective spectral comparison measure and a Gaussian Process Regression (GPR) model are used to predict the spectral similarity across a range of measurement parameters. This innovative approach effectively showcased its capability by dividing a problem space, ranging from 5 cm to 100 cm standoff distances and 5 μCi–100 μCi of 137Cs, into three unique combinations of measurement parameters. The findings from this work will aid in creating more robust datasets, which incorporate many possible measurement scenarios, reduce the number of required experimental test set measurements, and possibly enable experimental training data collection for gamma-ray spectroscopy.
Nematic liquid crystal elastomers (LCEs) are a unique class of network polymers with the potential for enhanced mechanical energy absorption and dissipation capacity over conventional network polymers because they exhibit both conventional viscoelastic behavior and soft-elastic behavior (nematic director changes under shear loading). This additional inelastic mechanism makes them appealing as candidate damping materials in a variety of applications from vibration to impact. The lattice structures made from the LCEs provide further mechanical energy absorption and dissipation capacity associated with packing out the porosity under compressive loading. Understanding the extent of mechanical energy absorption, which is the work per unit mass (or volume) absorbed during loading, versus dissipation, which is the work per unit mass (or volume) dissipated during a loading cycle, requires measurement of both loading and unloading response. In this study, a bench-top linear actuator was employed to characterize the loading-unloading compressive response of polydomain and monodomain LCE polymers and polydomain LCE lattice structures with two different porosities (nominally, 62% and 85%) at both low and intermediate strain rates at room temperature. As a reference material, a bisphenol-A (BPA) polymer with a similar glass transition temperature (9 °C) as the nematic LCE (4 °C) was also characterized at the same conditions for comparing to the LCE polymers. Based on the loading-unloading stress-strain curves, the energy absorption and dissipation for each material at different strain rates (0.001, 0.1, 1, 10 and 90 s-1) were calculated with considerations of maximum stress and material mass/density. The strain-rate effect on the mechanical response and energy absorption and dissipation behaviors was determined. The energy dissipation ratio was also calculated from the resultant loading and unloading stress-strain curves. All five materials showed significant but different strain rate effects on energy dissipation ratio. The solid LCE and BPA materials showed greater energy dissipation capabilities at both low (0.001 s−1) and high (above 1 s−1) strain rates, but not at the strain rates in between. The polydomain LCE lattice structure showed superior energy dissipation performance compared with the solid polymers especially at high strain rates.
Rattlesnake is a combined-environments, multiple input/multiple output control system for dynamic excitation of structures under test. It provides capabilities to control multiple responses on the part using multiple exciters using various control strategies. Rattlesnake is written in the Python programming language to facilitate multiple input/multiple output vibration research by allowing users to prescribe custom control laws to the controller. Rattlesnake can target multiple hardware devices, or even perform synthetic control to simulate a test virtually. Rattlesnake has been used to execute control problems with up to 200 response channels and 24 shaker drives. This document describes the functionality, architecture, and usage of the Rattlesnake controller to perform combined environments testing.
With the increasing integration of Distributed Energy Resources (DER) into the electric grid, maintaining grid reliability and resilience requires that these devices remain secure. This paper discusses a cybersecurity vulnerability assessment methodology that incorporates best practices from Sandia National Laboratories, SANS Institute, OWASP Foundation, and other web and Internet of Things (IoT) penetration testing (“pen testing”) programs, courses, and frameworks for assessing the security posture of devices. The methodology involves five sequential steps: (1) Collect Public Information, (2) Extract Hardware Details, (3) Inventory Software Components, (4) Identify Vulnerabilities, and (5) Test Vulnerabilities. Each step uncovers potential weaknesses in both hardware and software components of DER devices, considering adversary tactics, techniques, and procedures (TTPs), and potential attack vectors along the way. The results from the execution of this method on multiple residential- and small commercial-scale photovoltaic (PV) inverters reveled hardware and software vulnerabilities, which highlight the benefit of taking a methodical approach to discover vulnerabilities. While the specific vulnerability details are not shared here, a generalized overview of findings underscore the importance of robust security assessments for DER devices. Adoption of an assessment framework of this kind will identify and mitigate cybersecurity threats and bolster the resilience of DER-integrated electric grids.
The onset of plasticity can be assessed and related to ensuing plastic deformation up to the structural instability using one constitutive relationship that incorporates both behaviors of rapid work hardening (Stage 3) and the asymptotic leveling of stress (Stage 4). Results are presented wherein the work hardening variation of Stages 3 and 4 are found to be dependent through a constitutive relationship and useful in a Hall-Petch formulation of strength.
Melanized species of filamentous fungi isolated from high radiation environments have been reported to exhibit radiotropism, defined as the directed growth toward a source of ionizing radiation. Inconsistencies in the experimental approaches and results have impeded our understanding of the key factors involved in radiotropism. In the present study, we assessed radiotropism in four isolates of fungi: Aspergillus niger, A. calidoustus JC-1043, Paecilomyces variotii SNL-1, and P. variotii IMV-00236. Of these fungi, only P. variotii IMV-00236 had been previously reported to exhibit radiotropic behavior. Plates of each fungus were placed in equivalent proximity to a 137Cs source, with a primary gamma emission of 662 keV, and differences in the rate and direction of mycelia growth were measured over a seven-day period. Significant differences were not observed in the rate or direction of growth of the different fungi based on exposure to gamma radiation, which suggested a lack of measurable radiotropism in these experiments. Additional studies varying parameters such gamma emission rates and energies, as well as other types of ionizing radiation (e.g., alpha and beta particles, neutrons) are necessary to gain further insights to the factors critical to the expression of radiotropic behavior in filamentous fungi.
