Publications

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Nonuniformities in both sheath electric field and plasma excitation were observed around dissimilar metals placed on a rf electrode. Spatial maps of the rf sheath electric field obtained by laser-induced fluorescence-dip (LIF-dip) spectroscopy show that the sheath structure was a function of the electrode metal. In addition to the electric-field measurements, LIF, optical emission, and Langmuir probe measurements show nonuniform excitation around the dissimilar metals. The degree and spatial extent of the discharge nonuniformities were dependent on discharge conditions and the history of the metal surfaces.

We use quantum mechanics to characterize the structure and current-voltage performance of the Stoddart-Heath rotaxane-based programmable electronic switch. We find that the current when the ring is on the DNP is 37?58 times the current when the ring is on the TTF, in agreement with experiment (ratio of 10?100). This establishes the basis for iterative experimental?theoretical efforts to optimize systems for molecule-based electronics which we illustrate by predicting the effect of adding a group such as CN to the rotaxane.

The mechanism of hydroarylation of olefins by a homogeneous Ph-Ir(acac){sub 2}(L) catalyst is elucidated by first principles quantum mechanical methods (DFT), with particular emphasis on activation of the catalyst, catalytic cycle, and interpretation of experimental observations. On the basis of this mechanism, we suggest new catalysts expected to have improved activity. Initiation of the catalyst from the inert trans-form into the active cis-form occurs through a dissociative pathway with a calculated {Delta}H(0 K){sub {+-}} = 35.1 kcal/mol and {Delta}G(298 K){sub {+-}} = 26.1 kcal/mol. The catalytic cycle features two key steps, 1,2-olefin insertion and C?H activation via a novel mechanism, oxidative hydrogen migration. The olefin insertion is found to be rate determining, with a calculated {Delta}H(0 K){sub {+-}} = 27.0 kcal/mol and {Delta}G(298 K){sub {+-}} = 29.3 kcal/mol. The activation energy increases with increased electron density on the coordinating olefin, as well as increased electron-donating character in the ligand system. The regioselectivity is shown to depend on the electronic and steric characteristics of the olefin, with steric bulk and electron withdrawing character favoring linear product formation. Activation of the C?H bond occurs in a concerted fashion through a novel transition structure best described as an oxidative hydrogen migration. The character of the transition structure is seven coordinate Ir{sup V}, with a full bond formed between the migrating hydrogen and iridium. Several experimental observations are investigated and explained: (a) The nature of L influences the rate of the reaction through a ground-state effect. (b) The lack of {beta}-hydride products is due to kinetic factors, although {beta}-hydride elimination is calculated to be facile, all further reactions are kinetically inaccessible. (c) Inhibition by excess olefin is caused by competitive binding of olefin and aryl starting materials during the catalytic cycle in a statistical fashion. On the basis of this insertion-oxidative hydrogen transfer mechanism we suggest that electron-withdrawing substituents on the acac ligands, such as trifluoromethyl groups, are good modifications for catalysts with higher activity.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

In this paper, weak formulations and finite element discretizations of the governing partial differential equations of three-dimensional nonlinear acoustics in absorbing fluids are presented. The fluid equations are considered in an Eulerian framework, rather than a displacement framework, since in the latter case the corresponding finite element formulations suffer from spurious modes and numerical instabilities. When taken with the governing partial differential equations of a solid body and the continuity conditions, a coupled formulation is derived. The change in solid/fluid interface conditions when going from a linear acoustic fluid to a nonlinear acoustic fluid is demonstrated. Finite element discretizations of the coupled problem are then derived, and verification examples are presented that demonstrate the correctness of the implementations. We demonstrate that the time step size necessary to resolve the wave decreases as steepening occurs. Finally, simulation results are presented on a resonating acoustic cavity, and a coupled elastic/acoustic system consisting of a fluid-filled spherical tank.

Calculations of specific contact resistance as a function of doping and barrier height were performed for p-type GaN. These calculations took into account two valence bands, each with different effective masses, and show that at low doping, the heavy hole band accounts for most of the conduction, whereas at heavier doping, the light hole band dominates conduction. These calculations also indicate the barrier height for typical contacts to p-GaN is between 0.75 eV and 1 eV. Specific contact resistance measurements were made for oxidized Ni/Au, Pd, and oxidized Ni/Pd ohmic contact metal schemes to p-GaN. The Ni/Pd contact had the lowest specific contact resistance, 6 x 10{sup -4} {Omega} cm{sup 2}. Auger sputter depth profile analysis showed some Ni diffused away from the GaN surface to the contact surface with the bulk of the Pd located in between two areas of Ni. Both Ni and Pd interdiffused with the GaN at the semiconductor surface. The majority of the oxygen observed was with the Ni as NiO. Angle-resolved-x-ray photoelectron spectroscopy (AR-XPS) analyses showed the formation of predominantly NiO and PdO species, with higher Ni and Pd oxides at the contact surface.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We used molecular dynamics simulations to study the adsorption of aqueous uranyl species (UO22+) onto clay mineral surfaces in the presence of sodium counterions and carbonato ligands. The large system size (10 000 atoms) and long simulation times (10 ns) allowed us to investigate the thermodynamics of ion adsorption, and the atomistic detail provided clues for the observed adsorption behavior. The model system consisted of the basal surface of a low-charge Na-montmorillonite clay in contact with aqueous uranyl carbonate solutions with concentrations of 0.027 M, 0.081 M, and 0.162 M. Periodic boundary conditions were used in the simulations to better represent an aqueous solution interacting with an external clay surface. Uranyl adsorption tendency was found to decrease as the aqueous uranyl carbonate concentration was increased, while sodium adsorption remained constant. The observed behavior is explained by physical and chemical effects. As the ionic strength of the aqueous solution was increased, electrostatic factors prevented further uranyl adsorption once the surface charge had been neutralized. Additionally, the formation of aqueous uranyl carbonate complexes, including uranyl carbonato oligomers, contributed to the decreased uranyl adsorption tendency.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We have used scanning tunneling microscopy and low-energy electron microscopy to measure the thermal decay of two-dimensional Cu, Pb-overlayer, and Pb-Cu alloy islands on Pb-Cu(1 1 1) surface alloys. Decay rates covering 6-7 orders of magnitude are accessible by applying the two techniques to the same system. We find that Cu adatom diffusion across the surface alloy is rate-limiting for the decay of both Pb and Pb-Cu islands on the surface alloy and that this rate decreases monotonically with increasing Pb concentration in the alloy. The decrease is attributed to repulsive interactions between Cu adatoms and embedded Pb atoms in the surface alloy. The measured temperature dependences of island decay rates are consistent with first-principles calculations of the Cu binding and diffusion energies related to this 'site-blocking' effect.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We investigate the liquid structure, ion hydration, and some thermodynamic properties associated with the rigid geometry approximation to water by applying ab initio molecular dynamics simulations (AIMD) with the Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional at T = 320 K. We vary the rigid water geometry in order to locate a class of practical water models that yield reasonable liquid structure and dynamics, and to examine the progression of AIMD-predicted water behavior as the OH bond length varies. Water constrained at the optimal PBE gas phase geometry yields reasonable pair correlation functions. The predicted liquid phase pressure, however, is large ({approx}8.0 kbar). Although the O-H bond in water should elongate when transferred from gas to the condensed phase, when it is constrained to 0.02, or even just 0.01 {angstrom} longer than the optimal gas phase value, liquid water is predicted to be substantially overstructured compared to experiments. Zero temperature calculations of the thermodynamic properties of cubic ice underscore the sensitivity toward small variations in the O-H bond length. We examine the hydration structures of potassium, chloride, and formate ions in one rigid PBE water model. The results are in reasonable agreement with unconstrained AIMD simulations.

Abstract not provided.

Abstract not provided.