Publications

Results 59801–59900 of 99,299

Search results

Jump to search filters

Scandium separation from tungsten crucibles

Boyle, Timothy; Hess, Ryan; Neville, Michael L.; Howard, Panit C.

The first step in an attempt to isolate Sc° from a W° crucible was explored by soaking the samples in a series of organic (HOAc) and inorganic (HCl, H2SO4, H3PO4, HNO3) acids. All samples, except the HOAc, yielded a powder. The weight loss suggests that HNO3 is the most efficient solvent; however, the powders were tentatively identified by PXRD and found to contain both W and Sc by-products. The higher weight loss may also indicate dissolution of the Wo crucible, which was further evidenced upon visual inspection of the crucible. The H3PO4 acid soak yielded the cleanest removal of Sc from the crucible. More work to understand the separation of the Sc° from the W° crucible is necessary but the acid routes appear to hold promise under not as of yet established criteria.

More Details
TYPE SAND Report YEAR 2013
DOIOSTI

Temperature-package power correlations for open-mode geologic disposal concepts

Hardin, Ernest

Logistical simulation of spent nuclear fuel (SNF) management in the U.S. combines storage, transportation and disposal elements to evaluate schedule, cost and other resources needed for all major operations leading to final geologic disposal. Geologic repository reference options are associated with limits on waste package thermal power output at emplacement, in order to meet limits on peak temperature for certain key engineered and natural barriers. These package power limits are used in logistical simulation software such as CALVIN, as threshold requirements that must be met by means of decay storage or SNF blending in waste packages, before emplacement in a repository. Geologic repository reference options include enclosed modes developed for crystalline rock, clay or shale, and salt. In addition, a further need has been addressed for open modes in which SNF can be emplaced in a repository, then ventilated for decades or longer to remove heat, prior to permanent repository closure. For each open mode disposal concept there are specified durations for surface decay storage (prior to emplacement), repository ventilation, and repository closure operations. This study simulates those steps for several timing cases, and for SNF with three fuel-burnup characteristics, to develop package power limits at which waste packages can be emplaced without exceeding specified temperature limits many years later after permanent closure. The results are presented in the form of correlations that span a range of package power and peak postclosure temperature, for each open-mode disposal concept, and for each timing case. Given a particular temperature limit value, the corresponding package power limit for each case can be selected for use in CALVIN and similar tools.

More Details
TYPE SAND Report YEAR 2013
DOIOSTI

Identification of volatile butyl rubber thermal-oxidative degradation products by cryofocusing gas chromatography/mass spectrometry (cryo-GC/MS)

Samberson, Jonell N.; White, Michael I.; Bernstein, Robert; Hochrein, James M.

Chemical structure and physical properties of materials, such as polymers, can be altered as aging progresses, which may result in a material that is ineffective for its envisioned intent. Butyl rubber formulations, starting material, and additives were aged under thermal-oxidative conditions for up to 413 total days at up to 124 ÀC. Samples included: two formulations developed at Kansas City Plant (KCP) (#6 and #10), one commercially available formulation (#21), Laxness bromobutyl 2030 starting material, and two additives (polyethylene AC-617 and Vanax MBM). The low-molecular weight volatile thermal-oxidative degradation products that collected in the headspace over the samples were preconcentrated, separated, and detected using cryofocusing gas chromatography mass spectrometry (cryo-GC/MS). The majority of identified degradation species were alkanes, alkenes, alcohols, ketones, and aldehydes. Observations for Butyl #10 aged in an oxygen-18 enriched atmosphere (18O2) were used to verify when the source of oxygen in the applicable degradation products was from the gaseous environment rather than the polymeric mixture. For comparison purposes, Butyl #10 was also aged under non-oxidative thermal conditions using an argon atmosphere.

More Details
TYPE SAND Report YEAR 2013
DOIOSTI

Initial Assessment of an Airborne Ku-band Polarimetric SAR

Raynal, Ann M.; Doerry, Armin W.

Polarimetric synthetic aperture radar (SAR) has been used for a variety of dual-use research applications since the 1940's. By measuring the direction of the electric field vector from radar echoes, polarimetry may enhance an analyst's understanding of scattering effects for both earth monitoring and tactical surveillance missions. Polarimetry may provide insight into surface types, materials, or orientations for natural and man-made targets. Polarimetric measurements may also be used to enhance the contrast between scattering surfaces such as man-made objects and their surroundings. This report represents an initial assessment of the utility of, and applications for, polarimetric SAR at Ku-band for airborne or unmanned aerial systems.

More Details
TYPE SAND Report YEAR 2013
DOIOSTI
Results 59801–59900 of 99,299
Results 59801–59900 of 99,299