Publications

We investigated multiple-rate diffusion as a possible explanation for observed behavior in a suite of single-well injection-withdrawal (SWIW) tests conducted in a fractured dolomite. We first investigated the ability of a conventional double-porosity model and a multirate diffusion model to explain the data. This revealed that the multirate diffusion hypothesis/model is most consistent with all available data, and is the only model to date that is capable of matching each of the recovery curves entirely. Second, we studied the sensitivity of the SWIW recovery curves to the distribution of diffusion rate coefficients and other parameters. We concluded that the SWIW test is very sensitive to the distribution of rate coefficients, but is relatively insensitive to other flow and transport parameters such as advective porosity and dispersivity. Third, we examined the significance of the constant double-log late-time slopes ({minus}2. 1 to {minus}2.8), which are present in several data sets. The observed late-time slopes are significantly different than would be predicted by either conventional double-porosity or single-porosity media, and are found to be a distinctive feature of multirate diffusion under SWIW test conditions. Fourth, we found that the estimated distributions of diffusion rate coefficients are very broad, with the distributions spanning a range of at least 3.6 to 5.7 orders of magnitude.

Synthetic Aperture Radars are coherent imaging systems that produce complex-valued images of the ground. Because modern systems can generate large amounts of data, there is substantial interest in applying image compression techniques to these products. In this paper, we examine the properties of complex-valued SAR images relevant to the task of data compression. We advocate the use of transform-based compression methods but employ radically different quantization strategies than those commonly used for incoherent optical images. The theory, methodology, and examples are presented.

Technology planning is relatively straightforward for well-established research and development (R and D) areas--those areas in which an organization has a history, the competitors are well understood, and the organization clearly knows where it is going with that technology. What we are calling the fuzzy front-end in this paper is that condition in which these factors are not well understood--such as for new corporate thrusts or emerging areas where the applications are embryonic. While strategic business planning exercises are generally good at identifying technology areas that are key to future success, they often lack substance in answering questions like: (1) Where are we now with respect to these key technologies? ... with respect to our competitors? (2) Where do we want or need to be? ... by when? (3) What is the best way to get there? In response to its own needs in answering such questions, Sandia National Laboratories is developing and implementing several planning tools. These tools include knowledge mapping (or visualization), PROSPERITY GAMES and technology roadmapping--all three of which are the subject of this paper. Knowledge mapping utilizes computer-based tools to help answer Question 1 by graphically representing the knowledge landscape that we populate as compared with other corporate and government entities. The knowledge landscape explored in this way can be based on any one of a number of information sets such as citation or patent databases. PROSPERITY GAMES are high-level interactive simulations, similar to seminar war games, which help address Question 2 by allowing us to explore consequences of various optional goals and strategies with all of the relevant stakeholders in a risk-free environment. Technology roadmapping is a strategic planning process that helps answer Question 3 by collaboratively identifying product and process performance targets and obstacles, and the technology alternatives available to reach those targets.

Microstructures in the reaction interface between molten Al and dense mullite have been studied by transmission electron microscopy to provide insight into mechanisms for forming ceramic-metal composites by reactive metal penetration. The reactions, which have the overall stoichiometry, 3Al{sub 6}Si{sub 2}O{sub 13} + (8 + x)Al {r_arrow} 13Al{sub 2}O{sub 3} + xAl + 6Si, were carried out at temperatures of 900, 1100, and 1200 C for 5 minutes and 60 minutes, and 1400 C for 15 minutes. Observed phases generally were those given in the above reaction, although their proportions and interfacial microstructure differed strongly with reaction temperature. After reaction at 900 C, a thin Al layer separated unreacted mullite from the {alpha}-Al{sub 2}O{sub 3} and Al reaction products. No Si phase was found near the reaction front. After 5 minutes at 1100 C, the reaction front contained Si, {alpha}-Al{sub 2}O{sub 3}, and an aluminum oxide phase with a high concentration of Si. After 60 minutes at 1100 C many of the {alpha}-Al{sub 2}O{sub 3} particles were needle-shaped with a preferred orientation. After reaction at 1200 C, the reaction front contained a high density of Si particles that formed a continuous layer over many of the mullite grains. The sample reacted at 1400 C for 15 minutes had a dense {alpha}-Al{sub 2}O{sub 3} reaction layer less than 2 {micro}m thick. Some isolated Si particles were present between the {alpha}-Al{sub 2}O{sub 3} layer and the unreacted mullite. Using previously measured reaction kinetics data the observed temperature dependence of the interfacial microstructure have been modeled as three sequential steps, each one of which is rate-limiting in a different temperature range.

A family of uniform strain elements is presented for three-node triangular and four-node tetrahedral meshes. The elements use the linear interpolation functions of the original mesh, but each element is associated with a single node. As a result, a favorable constraint ratio for the volumetric response is obtained for problems in solid mechanics. The uniform strain elements do not require the introduction of additional degrees of freedom and their performance is shown to be significantly better than that of three-node triangular or four-node tetrahedral elements. In addition, nodes inside the boundary of the mesh are observed to exhibit superconvergent behavior for a set of example problems.

Deep level transient spectroscopy (DLTS) measurements were utilized to investigate deep level defects in metal-organic chemical deposition (MOCVD)-grown unintentionally doped p-type InGaAsN films lattice matched to GaAs. The as-grown material displayed a high concentration of deep levels distributed within the bandgap, with a dominant hole trap at E{sub v} + 0.10 eV. Post-growth annealing simplified the deep level spectra, enabling the identification of three distinct hole traps at 0.10 eV, 0.23 eV, and 0.48 eV above the valence band edge, with concentrations of 3.5 x 10{sup 14} cm{sup {minus}3}, 3.8 x 10{sup 14} cm{sup {minus}3}, and 8.2 x 10{sup 14} cm{sup {minus}3}, respectively. A direct comparison between the as-grown and annealed spectra revealed the presence of an additional midgap hole trap, with a concentration of 4 x 10{sup 14} cm{sup {minus}3} in the as-grown material. The concentration of this trap is sharply reduced by annealing, which correlates with improved material quality and minority carrier properties after annealing. Of the four hole traps detected, only the 0.48 eV level is not influenced by annealing, suggesting this level may be important for processed InGaAsN devices in the future.

Calculations can naturally be described as graphs in which vertices represent computation and edges reflect data dependencies. By partitioning the vertices of a graph, the calculation can be divided among processors of a parallel computer. However, the standard methodology for graph partitioning minimizes the wrong metric and lacks expressibility. We survey several recently proposed alternatives and discuss their relative merits.

It is shown how mobile H{sup +} ions can be generated thermally inside the oxide layer of Si/SiO{sub 2}/Si structures. The technique involves only standard silicon processing steps: the nonvolatile field effect transistor (NVFET) is based on a standard MOSFET with thermally grown SiO{sub 2} capped with a poly-silicon layer. The capped thermal oxide receives an anneal at {approximately}1100 C that enables the incorporation of the mobile protons into the gate oxide. The introduction of the protons is achieved by a subsequent 500-800 C anneal in a hydrogen-containing ambient, such as forming gas (N{sub 2}:H{sub 2} 95:5). The mobile protons are stable and entrapped inside the oxide layer, and unlike alkali ions, their space-charge distribution can be controlled and rapidly rearranged at room temperature by an applied electric field. Using this principle, a standard MOS transistor can be converted into a nonvolatile memory transistor that can be switched between normally on and normally off. Switching speed, retention, endurance, and radiation tolerance data are presented showing that this non-volatile memory technology can be competitive with existing Si-based non-volatile memory technologies such as the floating gate technologies (e.g. Flash memory).

A novel solution method has been developed to solve the coupled electron-photon transport problem on an unstructured triangular mesh. Instead of tackling the first-order form of the linear Boltzmann equation, this approach is based on the second-order form in conjunction with the conventional multi-group discrete-ordinates approximation. The highly forward-peaked electron scattering is modeled with a multigroup Legendre expansion derived from the Goudsmit-Saunderson theory. The finite element method is used to treat the spatial dependence. The solution method is unique in that the space-direction dependence is solved simultaneously, eliminating the need for the conventional inner iterations, a method that is well suited for massively parallel computers.

High-speed InGaP/GaAs heterojunction bipolar transistors (HBTs) for high-voltage circuit applications have been investigated. In order to obtain ideal IV characteristics, a lightly doped (N{sub DC} = 7.5 x 10{sup 15} cm{sup {minus}3}) thick (W{sub C} = 3.5 {micro}m) layer of GaAs was used as the collector layer. The devices fabricated have shown breakdown voltage exceeding 65 V. Device operated at up to a 60V bias, which is the highest operating voltage reported up to date for single heterojunction HBTs. Peak {line_integral}{sub T} and {line_integral}{sub MAX} values of 18 GHz and 29 GHz, respectively, have been achieved on a device with emitter area of 4x 12.5 {micro}m{sup 2}. Both {line_integral}{sub T} and {line_integral}{sub Max} degrades with higher bias, which is related to the elongation of the collector depletion width.

Tungsten is a candidate material for the International Thermonuclear Experimental Reactor (ITER) as well as other future magnetic fusion energy devices. Tungsten is well suited for certain fusion applications in that it has a high threshold for sputtering as well as a very high melting point. As with all materials to be used on the inside of a tokamak or similar device, there is a need to know the behavior of hydrogen isotopes embedded in the material. With this need in mind, the Tritium Plasma Experiment (TPE) has been used to examine the retention of tritium in tungsten exposed to high fluxes of 100 eV tritons. Both tungsten and tungsten containing 1% lanthanum oxide were used in these experiments. Measurements were performed over the temperature range of 423-973 K. After exposure to the tritium the samples were transferred to an outgassing system containing an ionization chamber for detection of the tritium. The samples were outgassed using linear ramps from room temperature up to 1473 K. Unlike most other materials exposed to energetic tritium, the tritium retention in tungsten reaches a maximum at intermediate with low retention at both high and low temperatures. For the very high triton fluences used (>1025 T/m2), the fractional retention of the tritium was below 0.02% of the incident particles. This report presents not only the results of the tritium retention, but also includes the modeling of the results and the implication for ITER and other future fusion devices where tungsten is used.

Abstract not provided.

MAPVAR, as was the case with its precursor programs, MERLIN and MERLIN II, is designed to transfer solution results from one finite element mesh to another. MAPVAR draws heavily from the structure and coding of MERLIN II, but it employs a new finite element data base, EXODUS II, and offers enhanced speed and new capabilities not available in MERLIN II. In keeping with the MERLIN II documentation, the computational algorithms used in MAPVAR are described. User instructions are presented. Example problems are included to demonstrate the operation of the code and the effects of various input options.

Traditionally, Ion Mobility Spectroscopy has been used to examine ions of relatively low molecular weight and high ion mobility. In recent years, however, biomolecules such as bradykinin, cytochrome c, bovine pancreatic trypsin inhibitor (BPTI), apomyoglobin, and lysozyme, have been successfully analyzed, but studies of whole bio-organisms have not been performed. In this study an attempt was made to detect and measure the mobility of two bacteriophages, {lambda}-phage and MS2 using electrospray methods to inject the viruses into the ion mobility spectrometer. Using data from Yeh, et al., which makes a comparison between the diameter of non-biologic particles and the specific particle mobility, the particle mobility for the MS2 virus was estimated to be 10{sup {minus}2} cm{sup 2}/volt-sec. From this mobility the drift time of these particles in our spectrometer was calculated to be approximately 65 msec. The particle mobility for the {lambda}-phage virus was estimated to be 10{sup {minus}3} cm{sup 2}/volt-sec. which would result in a drift time of 0.7 sec. Spectra showing the presence of a viral peak at the expected drift time were not observed. However, changes in the reactant ion peak that could be directly attributed to the presence of the viruses were observed. Virus clustering, excessive collisions, and the electrospray injection method limited the performance of this IMS. However, we believe that an instrument specifically designed to analyze such bioagents and utilizing other injection and ionization methods will succeed in directly detecting viruses and bacteria.

A high pressure test of the steel containment vessel (SCV) model was conducted on December 11-12, 1996 at Sandia National Laboratories, Albuquerque, NM, USA. The test model is a mixed-scaled model (1:10 in geometry and 1:4 in shell thickness) of an improved Mark II boiling water reactor (BWR) containment. A concentric steel contact structure (CS), installed over the SCV model and separated at a nominally uniform distance from it, provided a simplified representation of a reactor shield building in the actual plant. The SCV model and contact structure were instrumented with strain gages and displacement transducers to record the deformation behavior of the SCV model during the high pressure test. This paper summarizes the conduct and the results of the high pressure test and discusses the posttest metallurgical evaluation results on specimens removed from the SCV model.

A high pressure test of a scale model of a steel containment vessel (SCV) was conducted on December 11-12, 1996 at Sandia National Laboratories, Albuquerque, NM, USA. The test model is a mixed-scaled model (1:10 in geometry and 1:4 in shell thickness) of an improved Mark II boiling water reactor (BWR) containment. This testis part of a program to investigate the response of representative models of nuclear containment structures to pressure loads beyond the design basis accident. The posttest analyses of this test focused on three areas where the pretest analysis effort did not adequately predict the model behavior during the test. These areas are the onset of global yielding, the strain concentrations around the equipment hatch and the strain concentrations that led to a small tear near a weld relief opening that was not modeled in the pretest analysis.

A high pressure test of the steel containment vessel (SCV) model was conducted on December 11-12, 1996 at Sandia National Laboratories, Albuquerque, NM, USA. The test model is a mixed-scaled model (1:10 in geometry and 1:4 in shell thickness) of an improved Mark II boiling water reactor (BWR) containment. Several organizations from the US, Europe, and Asia were invited to participate in a Round Robin analysis to perform independent pretest predictions and posttest evaluations of the behavior of the SCV model during the high pressure test. Both pretest and posttest analysis results from all Round Robin participants were compared to the high pressure test data. This paper summarizes the Round Robin analysis activities and discusses the lessons learned from the collective effort.

Preliminary STMBMS and SEM results of the thermal decomposition of AP in the orthorhombic phase are presented. The overall decomposition is shown to be complex and controlled by both physical and chemical processes. The data show that the physical and chemical processes can be probed and characterized utilizing SEM and STMBMS. The overall decomposition is characterized by three distinguishing features: an induction period, and accelerator period and a deceleratory period. The major decomposition event occurs in the subsurface of the AP particles and propagates towards the center of the particle with time. The amount of total decomposition is dependent upon particle size and increases from 23% for {approximately}50{micro}m-diameter AP to 33% for {approximately}200{micro}m-diameter AP. A conceptual model of the physical processes is presented. Insight into the chemical processes is provided by the gas formation rates that are measured for the gaseous products. To our knowledge, this is the first presentation of data showing that the chemical and physical decomposition processes can be identified from one another, probed and characterized at the level that is required to better understand the thermal decomposition behavior of AP. Future work is planned with the goal of obtaining data that can be used to develop a mathematical description for the thermal decomposition of o-AP.

In recent years, serious investigations of potential extension of the useful life of older caverns or of the use of abandoned caverns for waste disposal have been of interest to the technical community. All of the potential applications depend upon understanding the reamer in which older caverns and sealing systems can fail. Such an understanding will require a more detailed knowledge of the fracture of salt than has been necessary to date. Fortunately, the knowledge of the fracture and healing of salt has made significant advances in the last decade, and is in a position to yield meaningful insights to older cavern behavior. In particular, micromechanical mechanisms of fracture and the concept of a fracture mechanism map have been essential guides, as has the utilization of continuum damage mechanics. The Multimechanism Deformation Coupled Fracture (MDCF) model, which is summarized extensively in this work was developed specifically to treat both the creep and fracture of salt, and was later extended to incorporate the fracture healing process known to occur in rock salt. Fracture in salt is based on the formation and evolution of microfractures, which may take the form of wing tip cracks, either in the body or the boundary of the grain. This type of crack deforms under shear to produce a strain, and furthermore, the opening of the wing cracks produce volume strain or dilatancy. In the presence of a confining pressure, microcrack formation may be suppressed, as is often the case for triaxial compression tests or natural underground stress situations. However, if the confining pressure is insufficient to suppress fracture, then the fractures will evolve with time to give the characteristic tertiary creep response. Two first order kinetics processes, closure of cracks and healing of cracks, control the healing process. Significantly, volume strain produced by microfractures may lead to changes in the permeability of the salt, which can become a major concern in cavern sealing and operation. The MDCF model is used in three simulations of field experiments in which indirect measures were obtained of the generation of damage. The results of the simulations help to verify the model and suggest that the model captures the correct fracture behavior of rock salt. The model is used in this work to estimate the generation and location of damage around a cylindrical storage cavern. The results are interesting because stress conditions around the cylindrical cavern do not lead to large amounts of damage. Moreover, the damage is such that general failure can not readily occur, nor does the extent of the damage suggest possible increased permeation when the surrounding salt is impermeable.

This report outlines the application of finite element methodology to large deformation solid mechanics problems, detailing also some of the key technological issues that effective finite element formulations must address. The presentation is organized into three major portions: first, a discussion of finite element discretization from the global point of view, emphasizing the relationship between a virtual work principle and the associated fully discrete system, second, a discussion of finite element technology, emphasizing the important theoretical and practical features associated with an individual finite element; and third, detailed description of specific elements that enjoy widespread use, providing some examples of the theoretical ideas already described. Descriptions of problem formulation in nonlinear solid mechanics, nonlinear continuum mechanics, and constitutive modeling are given in three companion reports.

On January 14--15, 1999, Sandia National Laboratories sponsored Deans Day, a conference for the Deans of Engineering and other executive-level representatives from 29 invited universities. Through breakout sessions and a wrap-up discussion, university and Sandia participants identified activities to further develop their strategic relationships. The four primary activities are: (A) concentrate joint efforts on current and future research strengths and needs; (B) attract the best students (at all grade levels) to science and engineering; (C) promote awareness of the need for and work together to influence a national science and technology R and D policy; and (D) enable the universities and Sandia to be true allies, jointly pursuing research opportunities and funding from government agencies and industry.

Abstract not provided.

Work was performed on seven subtasks. Several of these ended before the close of the program. This report contains a summary of each subtask.

Site Screening and Technical Guidance for Monitored Natural Attenuation at DOE Sites briefly outlines the biological and geochemical origins of natural attenuation, the tendency for natural processes in soils to mitigate contaminant transport and availability, and the means for relying on monitored natural attenuation (MNA) for remediation of contaminated soils and groundwaters. This report contains a step-by-step guide for (1) screening contaminated soils and groundwaters on the basis of their potential for remediation by natural attenuation and (2) implementing MNA consistent with EPA OSWER Directive 9200.4-17. The screening and implementation procedures are set up as a web-based tool (http://www.sandia.gov/eesector/gs/gc/na/mnahome.html) to assist US Department of Energy (DOE) site environmental managers and their staff and contractors to adhere to EPA guidelines for implementing MNA. This document is intended to support the Decision Maker's Framework Guide and Monitoring Guide both to be issued from DOE EM-40. Further technical advances may cause some of the approach outlined in this document to change over time.

Wafer processing involves several heating cycles to temperatures as high as 400 C. These thermal excursions are known to cause growth of voids that limit reliability of parts cut from the wafer. A model for void growth is constructed that can simulate the effect of these thermal cycles on void growth. The model is solved for typical process steps and the kinetics and extent of void growth are determined for each. It is shown that grain size, void spacing, and conductor line width are very important in determining void and stress behavior. For small grain sizes, stress relaxation can be rapid and can lead to void shrinkage during subsequent heating cycles. The effect of rapid quenching from process temperatures is to suppress void growth but induce large remnant stress in the conductor line. This stress can provide the driving force for void growth during storage even at room temperature. For isothermal processes the model can be solved analytically and estimates of terminal void size a nd lifetime are obtained.

Secondary containment for high speed rotating machinery, such as a centrifuge, is extremely important for operating personnel safety. Containment techniques can be very costly, ungainly and time consuming to construct. A novel containment concept is introduced which is fabricated out of modular sections of polycarbonate glazed into a Unistrut metal frame. A containment study for a high speed centrifuge is performed which includes the development of parameters for secondary containment design. The Unistrut/polycarbonate shield framing concept is presented including design details and proof testing procedures. The economical fabrication and modularity of the design indicates a usefulness for this shielding system in a wide variety of containment scenarios.

Abstract not provided.

Abstract not provided.

The authors developed a general model that describes the electrical responses of thickness shear mode resonators subject to a variety of surface conditions. The model incorporates a physically diverse set of single component loadings, including rigid solids, viscoelastic media, and fluids (Newtonian or Maxwellian). The model allows any number of these components to be combined in any configuration. Such multiple loadings are representative of a variety of physical situations encountered in electrochemical and other liquid phase applications, as well as gas phase applications. In the general case, the response of the composite load is not a linear combination of the individual component responses. The authors discuss application of the model in a qualitative diagnostic fashion to gain insight into the nature of the interfacial structure, and in a quantitative fashion to extract appropriate physical parameters such as liquid viscosity and density, and polymer shear moduli.

Layered semicrystalline silico-alumino-titanate (Si-Al-Ti) mixed oxides were synthesized by a modified sol-gel method with hydrothermal synthesis temperatures less than 200 C and autogenic pressure. The solid products are semicrystalline materials with a surface area of 136-367 m{sup 2}/g and a monomodal pore size distribution with an average pore diameter of 3.6-4.7 nrn. The catalytic activity for pyrene hydrogenation in a batch reactor at 300 C and 500 psig was determined for sulfided Ni-Mo supported on the Si-Al-Ti mixed oxide. The activity was a function of the support composition the heat treatment before and after loading the active metals, the addition of organic templates, and different methods of metal loading. The most active sulfided Ni-Mo/Si-Al-Ti catalyst has an activity in the same range as the commercial catalyst, Shell 324, but the metal loading is 37% less than the commercial catalyst.

HATS is a general purpose syntax derivation tree based transformation system in which transformation sequences are described in special purpose language. A powerful feature of this language is that unification is an explicit operation. By making unification explicit, an elegant framework arises in which to express complex application conditions which in turn enables refined control strategies to be realized. This paper gives an overview of HATS, focusing especially on the framework provided by the transformation language and its potential with respect to control and general purpose transformation.

The following software packages for uncertainty, sensitivity, and decision analysis were reviewed and also tested with several simple analysis problems: Crystal Ball, RiskQ, SUSA-PC, Analytica, PRISM, Ithink, Stella, LHS, STEPWISE, and JMP. Results from the review and test problems are presented. The study resulted in the recognition of the importance of four considerations in the selection of a software package: (1) the availability of an appropriate selection of distributions, (2) the ease with which data flows through the input sampling, model evaluation, and output analysis process, (3) the type of models that can be incorporated into the analysis process, and (4) the level of confidence in the software modeling and results.

Density-functional calculations for a wide variety of metals show that, contrary to the rebonding view of adsorbate bonding, addimers do not have notably longer surface bonds than adatoms, do not reside farther above the surface, and do not meet the rebonding arguments for augmented mobility. Rebonding concepts are found to have some utility in explaining addimer stability.

The compound semiconductor system InGaAsN exhibits many intriguing properties which are particularly useful for the development of innovative high efficiency thin film solar cells and long wavelength lasers. The bandgap in these semiconductors can be varied by controlling the content of N and In and the thin films can yet be lattice-matched to GaAs. In the present work, x-ray absorption fine structure (XAFS) and grazing incidence x-ray scattering (GIXS) techniques have been employed to probe the local environment surrounding both N and In atoms as well as the interface morphology of InGaAsN thin films epitaxially grown on GaAs. The soft x-ray XAFS results around nitrogen K-edge reveal that N is in the sp{sup 3} hybridized bonding configuration in InGaAsN and GaAsN, suggesting that N impurities most likely substitute for As sites in these two compounds. The results of In K-edge XAFS suggest a possible trend of a slightly larger coordination number of As nearest neighbors around In atoms in InGaAsN samples with a narrower bandgap whereas the In-As interatomic distance remains practically the same as in InAs within the experimental uncertainties. These results combined suggest that N-substitution of the As sites plays an important role of bandgap-narrowing while in the meantime counteracting the compressive strain caused by In-doping. Grazing incidence x-ray scattering (GIXS) experiments verify that InGaAsN thin films can indeed form very smooth interfaces with GaAs yielding an average interfacial roughness of 5-20{angstrom}.

An implicit Fast Fourier Transform (FFT) algorithm is implemented to solve the time-dependent Schroedinger equation with application to charge-exchange collisions. Cross sections are calculated for He{sup 2} on H and compared with experiment and other theoretical results. A disagreement between previously published theoretical results is resolved.

Random vibration is the phenomenon wherein random excitation applied to a mechanical system induces random response. We summarize the state of the art in random vibration analysis and testing, commenting on history, linear and nonlinear analysis, the analysis of large-scale systems, and probabilistic structural testing.

This study models the incremental radiological risk of transporting NARM to the Hanford commercial LLW facility, both for incident-free transportation and for possible transportation accidents, compared with the radiological risk of transporting LLW to that facility. Transportation routes are modeled using HIGHWAY 3.1 and risks are modeled using RADTRAN 4. Both annual population doses and risks, and annual average individual doses and risks are reported. Three routes to the Hanford site were modeled from Albany, OR, from Coeur d'Alene, ID (called the Spokane route), and from Seattle, WA. Conservative estimates are used in the RADTRAN inputs, and RADTRAN itself is conservative.

A parametric analysis is presented which summarizes the amount of total ({gamma}/NbC + {gamma}/Laves) and individual {gamma}/NbC and {gamma}/Laves constituents which form during solidification of {gamma}{sub (Fe,Ni,Cr)} alloys with variations in nominal Nb and C contents. Calculated results are presented for Fe base alloys and Ni base alloys. The results provide a quantitative rationale for understanding the relation between alloy composition and solidification microstructures and should provide useful insight into commercial alloys of similar composition.

There are two sources of contamination in solder alloys. The first source is trace elements from the primary metals used in the as-manufactured product, be that product in ingot, wire, or powder form. Their levels in the primary metal are determined by the refining process. While some of these trace elements are naturally occurring materials, additional contamination can result from the refining and/or forming processes. Sources include: furnace pot liners, debris on the cutting edges of shears, rolling mill rollers, etc. The types and levels of contaminants per solder alloy are set by recognized industrial, federal, military, and international specifications. For example, the 63Sn-37Pb solder purchased to the ASTM B 32 standard can have maximum levels of contamination for the following metals: 0.08(wt.)%Cu, 0.001 %Cd, 0.005%Al, 0.25%Bi, 0.03%As, 0.02%Fe, and 0.005 %Zn. A second cause of contamination in solders, and solder baths in particular, is their actual use in soldering operations. Each time a workpiece is introduced into the bath, some dissolution of the joint base metal(s), protective or solderable coatings, and fixture metal takes place which adds to contamination levels in the solder. The potential impurities include Cu; Ni; Au or other noble metals used as protective finishes and Al; Fe; and Zn to name a few. Even dissolution of the pot wall or liner is a source of impurities, typically Fe.

This paper details the application of a standard physical security system design process to a US Border Port of Entry (PoE) for vehicle entry/exit. The physical security design methodology is described as well as the physical security similarities to facilities currently at a US Border PoE for vehicles. The physical security design process description includes the various elements that make up the methodologies well as the considerations that must be taken into account when dealing with system integration of those elements. The distinctions between preventing unlawful entry/exit of illegal contraband and personnel are described. The potential to enhance the functions of drug/contraband detection in the Pre-Primary Inspection area through the application of emerging technologies are also addressed.

We consider the problem of planning shortest paths for a tethered robot with a finite length tether in a 2D environment with polygonal obstacles. We present an algorithm that runs in time O((k{sub 1} + 1){sup 2}n{sup 4}) and finds the shortest path or correctly determines that none exists that obeys the constraints; here n is the number obstacle vertices, and k{sub 1} is the number loops in the initial configuration of the tether. The robot may cross its tether but nothing can cross obstacles, which cause the tether to bend. The algorithm applies as well for planning a shortest path for the free end of an anchored cable.

The authors have developed a new type of heat spreader based on the integration of heat pipes directly within a thin planar structure suitable for use as a heat spreader or as the base layer in a substrate. The process uses micromachining methods to produce micron scale patterns that act as a wick in these small scale heat pipes. By using silicon or a low expansion metal as the wall material of these spreaders, they achieve a good match to the thermal coefficient of expansion of the die. The match allows the use of a thin high performance die attachment even on large size die. The embedded heat pipes result in high effective thermal conductivity for the new spreader technology.

Sampling during environmental drilling is essential to fully characterize the spatial distribution and migration of near surface contaminants. However, analysis of the samples is expensive and time-consuming: off-site laboratory analysis can take weeks or months. An alternative screening technology, Environmental Measurement-While-Drilling (EMWD), could save money and valuable time by quickly distinguishing between contaminated and uncontaminated areas. Real time measurements provided by an EMWD system enable on-the-spot decisions to be made regarding sampling strategies. The system also enhances worker safety and provides the added flexibility of being able to steer a drill bit in or out of hazardous zones.

Sampling during environmental drilling is essential to fully characterize the spatial distribution and migration of subsurface contaminants. However, analysis of the samples is expensive and time-consuming: off-site laboratory analysis can take weeks or months. Real-time information on environmental conditions, drill bit location and temperature during drilling is valuable in many environmental restoration operations. This type of information can be used to provide field screening data and improved efficiency of site characterization activities. The Environmental Measurement-While-Drilling (EMWD) System represents an innovative blending of new and existing technology in order to obtain real-time data during drilling. The system consists of two subsystems. The down-hole subsystem (at the drill bit) consists of sensors, a power supply, a signal conditioning and transmitter board, and a radio-frequency (RF) coaxial cable. The up-hole subsystem consists of a battery pack/coil, pickup coil, receiver, and personal computer. The system is compatible with fluid miser drill pipe, a directional drilling technique that uses minimal drilling fluids and generates little to no secondary waste. In EMWD, downhole sensors are located behind the drill bit and linked by a high-speed data transmission system to a computer at the surface. Sandia-developed Windows{trademark}-based software is used for data display and storage. As drilling is conducted, data is collected on the nature and extent of contamination, enabling on-the-spot decisions regarding drilling and sampling strategies. Initially, the downhole sensor consisted of a simple gamma radiation detector, a Geiger-Mueller tube (GMT). The design includes data assurance techniques to increase safety by reducing the probability of giving a safe indication when an unsafe condition exists. The EMWD system has been improved by the integration of a Gamma Ray Spectrometer (GRS) in place of the GMT. The GRS consists of a sodium iodide-thallium activated crystal coupled to a photomultiplier tube (PMT). The output of the PMT goes to a multichannel analyzer (MCA).The MCA data is transmitted to the surface via a signal conditioning and transmitter board similar to that used with the GMT. The EMWD system is described and the results of the GRS field tests and field demonstration are presented.

The Environmental Measurement-While-Drilling-Gamma Ray Spectrometer (EMWD-GRS) system represents an innovative blend of new and existing technology that provides real-time environmental and drill bit data during drilling operations. The EMWD-GRS technology was demonstrated at Savannah River Site (SRS) F-Area Retention Basin. The EMWD-GRS technology demonstration consisted of continuously monitoring for gamma-radiation-producing contamination while drilling two horizontal boreholes below the backfilled waste retention basin. These boreholes passed near previously sampled locations where concentrations of contaminant levels of cesium had been measured. Contaminant levels continuously recorded by the EMWD-GRS system during drilling were compared to contaminant levels previously determined through quantitative laboratory analysis of soil samples. The demonstration of the EMWD-GRS was a complete success. The results show general agreement between the soil sampling and EMWD-GRS techniques for CS-137. It was recognized that the EMWD-GRS tool would better satisfy our customers' needs if the instrument location could be continuously monitored. During the demonstration at SRS, an electromagnetic beacon with a walkover monitor (Subsite{reg_sign}) was used to measure bit location at depth. To use a beacon locator drilling must be stopped, thus it is normally only used when a new section of pipe was added. The location of contamination could only be estimated based on the position of the EMED-GRS package and the distance between locator beacon readings. A continuous location system that would allow us to know the location of each spectrum as it is obtained is needed.

The iterative advanced mean value algorithm (AMV+), introduced nearly ten years ago, is now widely used as a cost-effective probabilistic structural analysis tool when the use of sampling methods is cost prohibitive (Wu et al., 1990). The need to establish confidence bounds on calculated probabilities arises because of the presence of uncertainties in measured means and variances of input random variables. In this paper an algorithm is proposed that makes use of the AMV+ procedure and analytically derived probability sensitivities to determine confidence bounds on calculated probabilities.

Several ultrasonic inspection methods were developed at the Federal Aviation Administration's Airworthiness Assurance NDI Validation Center (AANC) to easily and rapidly detect hidden stress corrosion cracks in all vertical windshield posts on the US Coast Guard (USCG) HU-25 Guardian aircraft. The inspection procedure locates cracks as small as 2.0 millimeters emanating from internal fastener holes and determines their length. A test procedure was developed and a baseline assessment of the USCG fleet was conducted. Inspection results on twenty-five aircraft revealed a good correlation with results made during subsequent structural disassembly and visual inspection.

As III-V nitride device structures become more complicated and design rules shrink, well-controlled etch processes are necessary. Due to limited wet chemical etch results for the group-III nitrides, a significant amount of effort has been devoted to the development of dry etch processing. Dry etch development was initially focused on mesa structures where high etch rates, anisotropic profiles, smooth sidewalls, and equi-rate etching of dissimilar materials were required. For example, commercially available LEDs and laser facets for GaN-based laser diodes have been patterned using reactive ion etching (RIE). With the recent interest in high power, high temperature electronic devices, etch characteristics may also require smooth surface morphology, low plasma-induced damage, and selective etching of one layer over another. The principal criteria for any plasma etch process is its utility in the fabrication of a device. In this study, we will report plasma etch results for the group-III nitrides and their application to device structures.

The experimentally determined creep responses of a number of domal salts have been reported in, the literature. Some of these creep results were obtained using standard (conventional) creep tests. However, more typically, the creep data have come from multistage creep tests, where the number of specimens available for testing was small. An incremental test uses abrupt changes in stress and temperature to produce several time increments (stages) of different creep conditions. Clearly, the ability to analyze these limited data and to correlate them with each other could be of considerable potential value in establishing the mechanical characteristics of salt domes, both generally and specifically. In any analysis, it is necessary to have a framework of rules to provide consistency. The basis for the framework is the Multimechanism-Deformation (M-D) constitutive model. This model utilizes considerable general knowledge of material creep deformation to supplement specific knowledge of the material response of salt. Because the creep of salt is controlled by just a few micromechanical mechanisms, regardless of the origin of the salt, certain of the material parameters are values that can be considered universal to salt. Actual data analysis utilizes the methodology developed for the Waste Isolation Pilot Plant (WIPP) program, and the response of a bedded pure WIPP salt as the baseline for comparison of the domal salts. Creep data from Weeks Island, Bryan Mound, West Hackberry, Bayou Choctaw, and Big Hill salt domes, which are all sites of Strategic Petroleum Reserve (SPR) storage caverns, were analyzed, as were data from the Avery Island, Moss Bluff, and Jennings salt domes. The analysis permits the parameter value sets for the domal salts to be determined in terms of the M-D model with various degrees of completeness. In turn this permits detailed numerical calculations simulating cavern response. Where the set is incomplete because of the sparse database, reasonable assumptions permit the set to be completed. From the analysis, two distinct response groups were evident, with the salts of one group measurably more creep resistant than the other group. Interestingly, these groups correspond well with the indirectly determined creep closure of the SPR storage caverns, a correlation that probably should be expected. Certainly, the results suggest a simple laboratory determination of the creep characteristics of a salt material from a dome site can indicate the relative behavior of any potential cavern placed within that dome.

Three-dimensional imaging techniques, numerical methods for simulating flow and transport, and emergent computational architectures are combined to enable fundamental studies of fluid flow at the pore scale. High resolution reconstructions of porous media obtained using laser scanning confocal microscopy reduce sampling artifacts to sub-micron features, and simultaneously capture multiple grain length scales. However, the volumetric image data sets are extremely large, and there are significant computational challenges in utilizing this information effectively. The principal problem lies in the complexity of the geometry and the retention of this structure in numerical analyses. Lattice Boltzmann (LB) methods provide a direct means to simulate transport processes in complex geometric domains due to the unique ability to treat accurately and efficiently the multitude of discrete boundary conditions. LB methods are numerically explicit as formulated, and this characteristic is exploited through a mapping of the numerical domain to distributed computing architectures. These techniques are applied to perform single phase flow simulations in 3D data sets obtained from cores of Berea sandstone using confocal microscopy. Simulations are performed using both a purpose-built distributed processor computer and a massively parallel processer (MPP) platform.

The authors designed and conducted experiments in a heterogeneous sand pack where gravity-destabilized nonwetting phase invasion (CO{sub 2} and TCE) could be recorded using high resolution light transmission methods. The heterogeneity structure was designed to be reminiscent of fluvial channel lag cut-and-fill architecture and contain a series of capillary barriers. As invasion progressed, nonwetting phase structure developed a series of fingers and pools; behind the growing front they found nonwetting phase saturation to pulsate in certain regions when viscous forces were low. Through a scale analysis, they derive a series of length scales that describe finger diameter, pool height and width, and regions where pulsation occurs within a heterogeneous porous medium. In all cases, they find that the intrinsic pore scale nature of the invasion process and resulting structure must be incorporated into the analysis to explain experimental results. The authors propose a simple macro-scale structural growth model that assembles length scales for sub-structures to delineate nonwetting phase migration from a source into a heterogeneous domain. For such a model applied at the field scale for DNAPL migration, they expect capillary and gravity forces within the complex subsurface lithology to play the primary roles with viscous forces forming a perturbation on the inviscid phase structure.

Laser-induced damage mechanisms that can occur during high-intensity fiber transmission have been under study for a number of years. Our particular interest in laser initiation of explosives has led us to examine damage processes associated with the transmission of Q-switched, Nd:YAG pulses at 1.06 {micro}m through step-index, multimode, fused silica fiber. Laser breakdown at the fiber entrance face is often the first process to limit fiber transmission but catastrophic damage can also occur at either fiber end face, within the initial entry segment of the fiber, and at other internal sites along the fiber path. Past studies have examined how these various damage mechanisms depend upon fiber end-face preparation, fiber fixturing and routing, laser characteristics, and laser-to-fiber injection optics. In some applications of interest, however, a fiber transmission system may spend years in storage before it is used. Consequently, an important additional issue for these applications is whether or not there are aging processes that can result in lower damage thresholds over time. Fiber end-face contamination would certainly lower breakdown and damage thresholds at these surfaces, but careful design of hermetic seals in connectors and other end-face fixtures can minimize this possibility. A more subtle possibility would be a process for the slow growth of internal defects that could lead to lower thresholds for internal damage. In the current study, two approaches to stimulating the growth of internal defects were used in an attempt to produce observable changes in internal damage thresholds. In the first approach test fibers were subjected to a very high tensile stress for a time sufficient for some fraction to fail from static fatigue. In the second approach, test fibers were subjected to a combination of high tensile stress and large, cyclic temperature variations. Both of these approaches were rather arbitrary due to the lack of an established growth mechanism for internal defects. Damage characteristics obtained from fibers subjected to each of these aging environments were compared to results from fresh fibers tested under identical conditions. A surprising result was that internal damage was not observed in any of the tested fibers. Only breakdown at the fiber entrance face and catastrophic damage at both end faces were observed. Fiber end faces were not sealed during the accelerated aging environments, and thresholds at these faces were significantly lower in the aged fibers. However, most fibers transmitted relatively high pulse energies before damaging, and a large fraction never damaged before we reached the limits of our test laser. The absence of any observable affect on internal damage thresholds is encouraging, but the current results do not rule out the possibility that some other approach to accelerated aging could reveal a growth mechanism for internal defects.

The time-dependence of the wet oxidation of high-Al-content AlGaAs can be either linear, indicating reaction-rate limitation, or parabolic, indicating diffusion-limited rates. The transition from linear to parabolic time dependence can be explained by the increased rate of the formation of intermediate As{sub 2}O{sub 3} vs. its reduction to elemental As. A steadily increasing thickness of the As{sub 2}O{sub 3}-containing region at the oxidation front will shift the process from the linear to the parabolic regime. This shift from reaction-rate-limited (linear) to diffusion-limited (parabolic) time dependence is favored by increasing temperature or increasing Al mole fraction.

The work functions of polycrystalline metals are often used to systematize Schottky barrier height data for rectifying contacts to semiconductors. Rectifying contacts to silicon devices are predominantly formed using conductive metal silicides with work functions which are not as well characterized as metal work functions. The present work has two objectives. First, it classifies the transition metals using correlations between the metal work function and the atomic chemical potential. Second, the available data for metal silicides is collected and interpreted using an average charge transfer (ACT) model. The ACT model accounts for the electronic hardness of the component elements in addition to their chemical potentials. New trends in the behavior of silicide work functions are identified.

We discuss the role of localized high electric fields in the modification of Au surfaces with a W probe using the Interfacial Force Microscope. Upon bringing a probe close to a Au surface, we measure both the interfacial force and the field emission current as a function of separation with a constant potential of 100 V between tip and sample. The current initially increases exponentially as the separation decreases. However, at a distance of less than {approximately} 500{angstrom} the current rises sharply as the surface begins to distort and rapidly close the gap. Retraction of the tip before contact is made reveals the formation of a mound on the surface. We propose a simple model, in which the localized high electric field under the tip assists the production of mobile Au adatoms by detachment from surface steps, and a radial field gradient causes a net flux of atoms toward the tip by surface diffusion. These processes give rise to an unstable surface deformation which, if left unchecked, results in a destructive mechanical contact. We discuss our findings with respect to earlier work using voltage pulses in the STM as a means of nanofabrication.

The self-diffusion of Ca and the tracer diffusion of Mg in calcite have been experimentally measured using isotopic tracers of {sup 25}Mg and {sup 44}Ca. Natural single crystals of calcite were coated with a thermally-sputtered oxide thin film and then annealed in a CO{sub 2} gas at one atmosphere total pressure and temperatures from 550 to 800 C. Diffusion coefficient values were derived from the depth profiles obtained by ion microprobe analysis. The resultant activation energies for Mg tracer diffusion and Ca self-diffusion are respectively: E{sub a}(Mg) = 284 {+-} 74 kJ/mol and E{sub a}(Ca) = 271 {+-} 80 kJ/mol. For the temperature ranges in these experiments, the diffusion of Mg is faster than Ca. The results are generally consistent in magnitude with divalent cation diffusion rates obtained in previous studies and provide a means of interpreting the thermal histories of carbonate minerals, the mechanism of dolomitization, and other diffusion-controlled processes. The results indicate that cation diffusion in calcite is relatively slow and cations are the rate-limiting diffusing species for the deformation of calcite and carbonate rocks. Application of the calcite-dolomite geothermometer to metamorphic assemblages will be constrained by cation diffusion and cooling rates. The direct measurement of Mg tracer diffusion in calcite indicates that dolomitization is unlikely to be accomplished by Mg diffusion in the solid state but by a recrystallization process.

Calorimetric studies by Chai and Navrotsky (1996) on dolomite-ankerite energetic have been extended by including two additional types of samples: a very disordered stoichiometric MgCa(CO{sub 3}){sub 2} prepared from low temperature aqueous solution and three largely ordered natural samples of intermediate iron content. Combining these data with previous work, three distinct trends of energetic can be seen: those for samples with nearly complete order, nearly complete disorder, and intermediate order. From these trends, the enthalpy of complete disordering is estimated to be 33 {+-} 6 kJ/mol for MgCa(CO{sub 3}){sub 2} and 18 {+-} 5 kJ/mol for FeCa(CO{sub 3}){sub 2}.

Evolutionary pattern search algorithms (EPSAs) are a class of evolutionary algorithms (EAs) that have convergence guarantees on a broad class of nonconvex continuous problems. In previous work we have analyzed the empirical performance of EPSAs. This paper revisits that analysis and extends it to a more general model of mutation. We experimentally evaluate how the choice of the set of mutation offsets affects optimization performance for EPSAs. Additionally, we compare EPSAs to self-adaptive EAs with respect to robustness and rate of optimization. All experiments employ a suite of test functions representing a range of modality and number of multiple minima.

Evolutionary programs (EPs) and evolutionary pattern search algorithms (EPSAS) are two general classes of evolutionary methods for optimizing on continuous domains. The relative performance of these methods has been evaluated on standard global optimization test functions, and these results suggest that EPSAs more robustly converge to near-optimal solutions than EPs. In this paper we evaluate the relative performance of EPSAs and EPs on a real-world application: flexible ligand binding in the Autodock docking software. We compare the performance of these methods on a suite of docking test problems. Our results confirm that EPSAs and EPs have comparable performance, and they suggest that EPSAs may be more robust on larger, more complex problems.

As part of a pollution prevention program, a study was conducted at Sandia National Laboratories and at the Amarillo, ''Pantex Plant'' to identify a suitable replacement solvent(s) for cleaning hardware during routine maintenance operations. Current cleaning is performed using solvents (e.g. acetone, toluene, MEK, alcohols) that are classified as Resource Conservation and Recovery Act (RCW) materials. The Environmental Protection Agency (EPA) has assigned four characteristics as the criteria for determining whether a material is identified as hazardous under RCRA: Ignitability, Corrosivity, Reactivity and Toxicity. Within the DOE and DoD sector, these solvents are used with hand wipes to clean surfaces prior to O-ring replacement, to remove decals for new labeling, to clean painted surfaces prior to reconditioning, and for other general maintenance purposes. In some cases, low level radioactive contamination during cleaning necessitates that the RCIL4 solvent-containing wipes be classified as mixed waste. To avoid using RCRA materials, cleaning candidates were sought that had a flashpoint greater than 140 F, a pH between 2.5 and 12.5, and did not fail the reactivity and toxicity criteria. Three brominated cleaners, two hydrofluoroether azeotropes and two aliphatic hydrocarbon cleaner formulations were studied as potential replacements. Cleaning efficacy, materials compatibility, corrosion and accelerated aging studies were conducted and used to screen potential candidates. Hypersolve NPB (an n-propyl bromide based formulation) consistently ranked high in removing typical contaminants for weapons applications.

Deep and shallow electron traps form in irradiated thermal SiO{sub 2} as a natural response to hole transport and trapping. The density and stability of these defects are discussed, as are their implications for total-dose modeling.

Techniques for modeling oil well sand production have been developed using the formulations for superquadric discrete elements and Darcy fluid flow. Discrete element models are generated using the new technique of particle cloning. Discrete element sources and sinks allow simulation of sand production from the initial state through the transition to an equilibrium state where particles are created and removed at the same rate.

This paper provides a summary introduction to the emerging area of Architectural Surety{trademark} applications for buildings and infrastructures that are subjected to dynamic loads from blast and naturally occurring events. This technology area has been under investigation to assist with the definition of risks associated with dynamic loads and to provide guidance for determining the required upgrading and retrofitting techniques suggested for reducing building and infrastructure vulnerabilities to such dynamic forces. This unique approach involves the application of risk management techniques for solving problems of the as-built environment through the application of security, safety, and reliability principles developed in the nuclear weapons programs of the United States Department of Energy (DOE) and through the protective structures programs of the German Ministry of Defense (MOD). The changing responsibilities of engineering design professionals are addressed in light of the increased public awareness of structural and facility systems' vulnerabilities to malevolent, normal, and abnormal environment conditions. Brief discussions are also presented on (1) the need to understand how dynamic pressures are affected by the structural failures they cause, (2) the need to determine cladding effects on columns, walls, and slabs, and (3) the need to establish effective standoff distance for perimeter barriers. A summary description is presented of selected technologies to upgrade and retrofit buildings by using high-strength concrete and energy-absorbing materials and by specifying appropriately designed window glazing and special masonry wall configurations and composites. The technologies, material performance, and design evaluation procedures presented include super-computational modeling and structural simulations, window glass fragmentation modeling, risk assessment procedures, instrumentation and health monitoring systems, three-dimensional CAD virtual reality visualization techniques, and material testing data.

{sup 6}Li and {sup 7}Li solid state magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy has been used to investigate the local coordination environment of lithium in a series of xLi{sub 2}O {center_dot} (1-x)P{sub 2}O{sub 5} glasses, where 0.05 {le} x {le} 0.55. Both the {sup 6}Li and {sup 7}Li show chemical shift variations with changes in the Li{sub 2}O concentration, but the observed {sup 6}Li NMR chemical shifts closely approximate the true isotropic chemical shift and can provide a measure of the lithium bonding environment. The {sup 6}Li NMR results indicate that in this series of lithium phosphate glasses the Li atoms have an average coordination between four and five. The results for the metaphosphate glass agree with the coordination number and range of chemical shifts observed for crystalline LiPO{sub 3}. An increase in the {sup 6}Li NMR chemical shift with increasing Li{sub 2}O content was observed for the entire concentration range investigated, correlating with increased cross-linking of the phosphate tetrahedral network by O-Li-O bridges. The {sup 6}Li chemical shifts were also observed to vary monotonically through the anomalous glass transition temperature (T{sub g}) minimum. This continuous chemical shift variation shows that abrupt changes in the Li coordination environment do not occur as the Li{sub 2}O concentration is increased, and such abrupt changes can not be used to explain the T{sub g} minimum.

Evolutionary algorithms have been successfully applied to a variety of molecular structure prediction problems. In this paper we reconsider the design of genetic algorithms that have been applied to a simple protein structure prediction problem. Our analysis considers the impact of several algorithmic factors for this problem: the confirmational representation, the energy formulation and the way in which infeasible conformations are penalized, Further we empirically evaluated the impact of these factors on a small set of polymer sequences. Our analysis leads to specific recommendations for both GAs as well as other heuristic methods for solving PSP on the HP model.

Abstract not provided.

A partially-depleted SOI transistor structure has been designed that does not require the use of specially-processed hardened buried oxides for total-dose hardness and maintains the intrinsic SEU and dose rate hardness advantages of SOI technology.

We conducted depth of penetration experiments with 7.11-mm-diameter, 74.7-mm-long, spherical-nose, 4340 steel projectiles launched into 250-mm-diameter, 6061-T6511 aluminum targets. To show the effect of projectile strength, we used projectiles that had average Rockwell harnesses of R{sub c} = 36.6, 39.5, and 46.2. A powder gun and two-stage, light-gas guns launched the 0.023 kg projectiles at striking velocities between 0.5 and 3.0 km/s. Post-test radiographs of the targets showed three response regions as striking velocities increased: (1) the projectiles remained visibly undeformed, (2) the projectiles permanently deformed without erosion, and (3) the projectiles eroded and lost mass. To show the effect of projectile strength, we compared depth-of-penetration data as a function of striking velocity for spherical-nose rods with three Rockwell harnesses at striking velocities ranging from 0.5 to 3.0 km/s. To show the effect of nose shape, we compared penetration data for the spherical-nose projectiles with previously published data for ogive-nose projectiles.

The depolymerization of organosolv-derived lignins by bases in methanol or ethanol solvent was studied in rapidly heated batch microreactors. The conversion of lignin to ether solubles by KOH in methanol or ethanol was rapid at 290 "C, reaching the maximum value within 10-15 minutes. An excess of base relative to Lignin monomer units was required for maximum conversion. Strong bases (KOH, NaOH, CSOH) convert more of the lignin to ether soluble material than do weaker bases LiOH, Ca(OH)2, and NacCO2). Ethanol and methanol are converted to acetic and formic acid respectively under the reaction conditions with an activation energy of approximately 50 kcal/mol. This results in a loss of solvent, but more importantly neutralizes the base catalyst, halting forward progress of the reaction.

Continuing education is a critical issue in the workplace. Rapid change, the emergence of new technology, and the lack of trained individuals make continuing education an imperative for employers. The desire for individual growth and marketability make it an imperative for the employee also. While there are many options for continuing education, an increasingly popular vehicle is the short course. Time, cost efficiency and instruction by those experienced in real industrial practice are key factors in the success of this educational format. Over the past couple of decades, short course offerings and the number and type of sponsoring organizations have grown significantly. Within the scientific community, courses in basic disciplines (e.g., materials characterization), emergent technologies (e.g., Micro-Electro- Mechanical Systems), equipment operation (e.g., electron microscopes) and even business practices (e.g., ES&H, proposal writing) have emerged and are taught by universities, technical societies and equipment manufacturers. Short course offerings and formats are evolving. Presently, it is possible to find series of courses which define specific curricula. These curricula set the stage for new developments in the future, including increased certification and licensing (e.g., technologists). Along with such certifications will come the need for accreditation. Who will offer such programs, and especially, who will accredit them are significant questions. Perhaps the most dramatic changes will occur with the integration of advanced information technology. While satellite-based remote offerings are available, the use of the web for educating a dispersed group is just beginning to emerge. In its simplest forms, this offers little advantage over a video or a real-time satellite course, but the eventual emergence of tele-operation of experimental equipment will revolutionize remote teaching.

The asymptotically singular stress state found at the tip of a rigid, square inclusion embedded within a thin, linear elastic disk has been determined for both uniform cooling and an externally applied pressure. Since these loadings we symmetric, the singular stress field is characterized by a single stress intensity factor, and the applicable calibration relationship has been determined for both fully bonded and unbended inclusions. A lack of interfacial bonding has a profound effect on inclusion-tip stress fields. A large radial compressive stress is generated in front of the inclusion tip when the inclusion is well bonded, whereas a large tensile hoop stress is generated when the inclusion is unbended, and frictionless sliding is allowed. Consequently, an epoxy disk containing an unbended inclusion appears more likely to crack when cooled than a disk containing a fully bonded inclusion. Elastic-plastic calculations show that when the inclusion is unbended, encapsulant yielding has a significant effect on the inclusion-tip stress state. Yielding relieves stress parallel to the interface and greatly reduces the radial compressive stress in front of the inclusion. As a result, the encapsulant is subjected to a nearly uniaxial tensile stress at the inclusion tip. For a typical high-strength epoxy, the calculated yield zone is embedded within the region dominated by the elastic hoop stress singularity. A limited number of tests have been carried out to determine if encapsulant cracking can be induced by cooling a specimen fabricated by molding a square, steel insert within a thin, epoxy disk. Test results are in qualitative agreement with analysis. Cracks developed only in disks with mold-released inserts, and the tendency for cracking increased with inclusion size.

High wire number, 25-mm diameter tungsten wire arrays have been imploded on the 8-MA Saturn generator, operating in a long-pulse mode. By varying the mass load from 710 to 6140 ps/cm, implosion times of 130 to 250 ns have been obtained with implosion velocities of 50 to 25 cn-dys, respectively. These z-pinch implosions produced plasmas with millimeter diameters that radiated 600 to 800 kJ of x-rays, with powers of 20 to 49 TW; the corresponding pulse widths were 19 to 7.5 ns, with risetimes ranging from 6.5 to 4.0 ns. These powers and pulse widths are similar to those achieved with 50 ns implosion times on Saturn. Two-dimensional, radiation- magnetohydrodynamic calculations indicate that the imploding shells in these long implosion time experiments are comparable in width to those in the short pulse cases. This can only be due to lower initial perturbations. A heuristic wire array model suggests that the reduced perturbations, in the long pulse cases, may be due to the individual wire merger occurring well before the acceleration of the shell. The experiments and modeling suggest that 150 to 200 ns implosion time z-pinches could be employed for high-power, x-ray source applications.

Computational models have the potential of being used to make credible predictions in place of physical testing in many contexts, but success and acceptance require a convincing model validation. In general, model validation is understood to be a comparison of model predictions to experimental results but there appears to be no standard framework for conducting this comparison. This paper gives a statistical framework for the problem of model validation that is quite analogous to calibration, with the basic goal being to design and analyze a set of experiments to obtain information pertaining to the `limits of error' that can be associated with model predictions. Implementation, though, in the context of complex, high-dimensioned models, poses a considerable challenge for the development of appropriate statistical methods and for the interaction of statisticians with model developers and experimentalists. The proposed framework provides a vehicle for communication between modelers, experimentalists, and the analysts and decision-makers who must rely on model predictions.

The U. S. Department of Energy plans to dispose of transuranic wastes at the Waste Isolation Pilot Plant (WIPP), a geologic repository located at a depth of about 655 meters. The WIPP underground facility is located in the bedded salt of the Salado Formation. Access to the facility is provided through vertical shafts, which will be sealed after decommissioning to limit the release of hazardous waste from the repository and to limit flow into the facility. Because limited data are available to characterize the properties of dynamically compacted crushed salt, Sandia National Laboratories authorized RE/SPEC to perform additional tests on specimens of dynamically compacted crushed salt. These included shear consolidation creep, permeability, and constant strain-rate triaxial compression tests. A limited number of samples obtained from the large compacted mass were available for use in the testing program. Thus, additional tests were performed on samples that were prepared on a smaller scale device in the RE/SPEC laboratory using a dynamic-compaction procedure based on the full-scale construction technique. The laboratory results were expected to (1) illuminate the phenomenology of crushed-salt deformation behavior and (2) add test results to a small preexisting database for purposes of estimating parameters in a crushed-salt constitutive model. The candidate constitutive model for dynamically compacted crushed salt was refined in parallel with this laboratory testing.

This paper describes three experiments whose purpose is to determine the amount of retained oil on massive salt surfaces and in crushed salt in the presence of water and brine. These experiments have application to the decommissioning process for the Weeks Island mine. In the first experiment, oil-coated salt cores were immersed in either fresh water or in 85% brine. In the case of both fluids, the oil was completely removed from the cores within several hours. In the second experiment, oil-coated salt pieces were suspended in air and the oil was allowed to drain. The weight of retained oil clinging to the salt was determined. This experiment was used to estimate the total amount of oil clinging to the roofs of the mine. The total amount of oil clinging to the roofs of the mine is estimated to be between 240 and 400 m3 (1500 and 2500 BBL). In the third experiment, a pan of oil-soaked crushed salt was immersed in 85% brine, and oil removal from the salt was monitored as a function of time. At the start of the experiment, prior to immersion, 16% of the bulk volume of the crushed salt was determined to be interstitial oil. After the pan of crushed salt was immersed in 85% brine, 80% of the oil, which had been in the interstitial spaces of the crushed salt, immediately floated to the surface of the brine. This oil was not bound and was immediately released. During the next 380 hours, oil continued to separate from the salt and the rate of transfer was governed by a mass-transfer rate limitation.

Charge-state calculations based on density-functional theory are used to study the formation energy of hydrogen in wurtzite and zinc-blende GaN as a function of Fermi level Comparison of these results reveals notable differences including a 0.56 eV lower formation energy for H2 in wurtzite, and different configurations for H2 and H- in the two crystal structures. Furthermore, H+ is found to be equally stable at bond-centered and anti-bonding sites in wurtzite, whereas it is unstable at a bond-centered site in zinc blende. These differences are due to distinct features of the two crystal structures including: the lower symmetry of wurtzite which provides a wider selection of bonding sites for H+, and the existence of extended three-fold symmetric channels oriented along the c-axis in wurtzite which provide more favorable bonding configurations for H2 and H-.N-H+ stretch-mode vibration frequencies, clustering of ?3+ in p-type material, and diffusion barriers for H" are also investigated in wurtzite GaN. A diffusion barrier of 1.6 eV is found for H- in wurtzite GaN, significantly lower than a previous estimate, and a tendency for H+ clustering in p-type material is found.

This document describes the application design philosophy for the Comprehensive Nuclear Test Ban Treaty Research & Development Web Site. This design incorporates object-oriented techniques to produce a flexible and maintainable system of applications that support the web site. These techniques will be discussed at length along with the issues they address. The overall structure of the applications and their relationships with one another will also be described. The current problems and future design changes will be discussed as well.

Long wavelength (2-6 {micro}m) diode emitters are desirable for many applications including monitoring of chemical species in the environment and manufacturing, long wavelength fiber-optic communications, lidar, and JR detector counter-measures. No practical diode lasers are available for any of these applications because the band structure of bulk III-V, II-VI, and IV-VI semiconductor alloys results in large Auger recombination rates at these wavelengths. Experimental and theoretical work at Sandia has resulted in new understanding of the electronic properties of narrow bandgap III-V heterostructures, and we have found methods of reducing the Auger rates in certain InAsSb superlattices and quantum wells. These devices enable us to begin chemical sensing demonstrations of important species such as CO-CO{sub 2} and numerous other compounds. This project will involve developing chemical sensing systems and determining the sensitivity and limitations of these systems. Concurrently, we will improve upon infrared emitters used in these systems.

This report documents a data collection where we recorded redundant range image data from multiple views of a simple scene, and recorded accurate survey measurements of the same scene. Collecting these data was a focus of the research project Automated Geometric Model Builder Using Range Image Sensor Data (96-0384), supported by Sandia's Laboratory-Directed Research and Development (LDRD) Program during fiscal years 1996, 1997, and 1998. The data described here are available from the authors on CDROM, or electronically over the Internet. Included in this data distribution are Computer-Aided Design (CAD) models we constructed from the survey measurements. The CAD models are compatible with the SolidWorks 98 Plus system, the modern Computer-Aided Design software system that is central to Sandia's DeskTop Engineering Project (DTEP). Integration of our measurements (as built) with the constructive geometry process of the CAD system (as designed) delivers on a vision of the research project. This report on our final data collection will also serve as a final report on the project.

This report documents the results of a laboratory-directed research and development (LDRD) project on control and agile manufacturing in the critical metalorganic chemical vapor deposition (MOCVD) and molecular beam epitaxy (MBE) materials growth processes essential to high-speed microelectronics and optoelectronic components. This effort is founded on a modular and configurable process automation system that serves as a backbone allowing integration of process-specific models and sensors. We have developed and integrated MOCVD- and MBE-specific models in this system, and demonstrated the effectiveness of sensor-based feedback control in improving the accuracy and reproducibility of semiconductor heterostructures. In addition, within this framework we have constructed ''virtual reactor'' models for growth processes, with the goal of greatly shortening the epitaxial growth process development cycle.

This report summarizes our work on high-voltage switches during the past few years. With joint funding from the Department of Energy (DOE) and the Department of Defense (DOD), we tested a wide variety of switches to a common standard. This approach permitted meaningful comparisons between disparate switches. Most switches were purchased from commercial sources, though some were experimental devices. For the purposes of this report, we divided the switches into three generic types (gas, vacuum, and semiconductor) and selected data that best illustrates important strengths and weaknesses of each switch type. Test techniques that indicate the state of health of the switches are emphasized. For example, a good indicator of residual gas in a vacuum switch is the systematic variation of the switching delay in response to changes in temperature and/or operating conditions. We believe that the presentation of this kind of information will help engineers to select and to test switches for their particular applications. Our work was limited to switches capable of driving slappers. Also known as exploding-foil initiators, slappers are detonators that initiate a secondary explosive by direct impact with a small piece of matter moving at the detonation velocity (several thousands of meters per second). A slapper is desirable for enhanced safety (no primary explosive), but it also places extra demands on the capacitor-discharge circuit to deliver a fast-rising current pulse (greater than 10 A/ns) of several thousand amperes. The required energy is substantially less than one joule; but this energy is delivered in less than one microsecond, taking the peak power into the megawatt regime. In our study, the switches operated in the 1 kV to 3 kV range and were physically small, roughly 1 cm{sup 3} or less. Although a fuze functions only once in actual use, multiple-shot capability is important for production testing and for research work. For this reason, we restricted this report to multiple-shot switches. Furthermore, our work included only switches with submicrosecond timing precision, thereby excluding mechanical switches.

Scenarios in which the explosive burster charge in a chemical munition accidentally detonates inside demilitarization containment chambers are analyzed. The vulnerability of an inner Auxiliary Pressure Vessel and the primary Explosive Containment Chamber to impact by fragments from the largest explosive charge expected to be placed in these chambers (M426, 8 inch, chemical, 7 lbs Comp B) is evaluated. Numerical (CTH) and empirical (ConWep) codes are used to characterize the munition fragments, and assess the consequences of their impact and penetration on the walls of these vessels. Both pristine and corroded configurations of the munition have been considered, with and without liquid agent fill. When the munition burster charge detonates, munition case fragments impact and perforate the Auxiliary Pressure Vessel wall, resulting in extensive breakup of this inner chamber and the formation of additional fragments. These residual munition case and Auxiliary Pressure Vessel fragments have sufficient mass and velocity to crater the Explosive Containment Chamber inner wall layer, with accompanying localized permanent deformation (bulging) of both the inner and outer chamber walls. The integrity of the Explosive Containment Chamber was retained under all of the APV / munition configurations considered in this study, with no evidence that primary (munition) or secondary (munition and Auxiliary Pressure Vessel) fragments will perforate the inner chamber wall. Limited analyses of munition detonation without the Auxiliary Pressure Vessel present indicate that some munition span fragments could form under those conditions that have sufficient mass and velocity to perforate the inner wall of the Explosive Containment Chamber.

Abstract not provided.

Three reactive materials were evaluated to identify the optimum treatment reagent for use in a Permeable Reactive Barrier Treatment System at Rocky Flats Environmental Technology Site (RFETS). The three reactive media evaluated included high carbon steel iron filings, an iron-silica alloy in the form of a foam aggregate, and a pellicular humic acid based sorbent (Humasorb from Arctech) mixed with sand. Each material was tested in the laboratory at column scale using simulated site water. All three materials showed promise for the 903 Mound Site; however, the iron filings were determined to be the most cost effective media. In order to validate the laboratory results, the iron filings were further tested at a pilot scale (field columns) using actual site water. Pilot test results were similar to laboratory results; consequently, the iron filings were chosen for the full scale demonstration of this reactive barrier technology. Design parameters including saturated hydraulic conductivity, treatment residence time, and head loss across the media were provided to the design team in support of the final design.

Resistive bolometry is an accurate, robust, spectrally broadband technique for measuring absolute x-ray fluence and flux. Bolometry is an independent technique for x-ray measurements that is based on a different set of physical properties than other diagnostics such as x-ray diodes, photoconducting detectors, and P-I-N diodes. Bolometers use the temperature-driven change in element resistivity to determine the total deposited energy. The calibration of such a device is based on fundamental material properties and its physical dimensions. We describe the use of nickel and gold bolometers to measure x rays generated by high-power z pinches on Sandia's Saturn and Z accelerators. The Sandia bolometer design described herein has a pulse response of {approximately}1 ns. We describe in detail the fabrication, fielding, and data analysis issues leading to highly accurate x-ray measurements. The fundamental accuracy of resistive bolometry will be discussed.

Abstract not provided.

This paper documents development of a capability for performing shape-changing editing operations on solid model representations in an immersive environment. The capability includes part- and assembly-level operations, with part modeling supporting topology-invariant and topology-changing modifications. A discussion of various design considerations in developing an immersive capability is included, along with discussion of a prototype implementation we have developed and explored. The project investigated approaches to providing both topology-invariant and topology-changing editing. A prototype environment was developed to test the approaches and determine the usefulness of immersive editing. The prototype showed exciting potential in redefining the CAD interface. It is fun to use. Editing is much faster and friendlier than traditional feature-based CAD software. The prototype algorithms did not reliably provide a sufficient frame rate for complex geometries, but has provided the necessary roadmap for development of a production capability.

This pilot study project explored the problem of providing access to the nomadic worker who desires to connect a computer through network access points at a number of different locations within the SNL/NM campus as well as outside the campus. The design and prototype development gathered knowledge that may allow a design to be developed that could be extended to a larger number of SNL/NM network drop boxes. The focus was to provide a capability for a worker to access the SNL IRN from a network drop box (e.g. in a conference room) as easily as when accessing the computer network from the office normally used by the worker. Additional study was done on new methods to authenticate the off campus worker, and protect and control access to data.

Abstract not provided.

Abstract not provided.

Interest in the critical dynamics of superfluid He in microgravity conditions has motivated the development of new high resolution thermometry technology for use in space experiments near 2K. The current material commonly used as the temperature sensing element for high resolution thermometers (HRTs) is copper ammonium bromide (Cu(NH{sub 4}){sub 2}Br{sub 4}2H{sub 2}O) or CAB, which undergoes a ferromagnetic phase transition at 1.8K. HRTs made from CAB have demonstrated low drift (<10fK/s) and a temperature resolution of 0.1nK. Unfortunately, paramagnetic salts such as CAB are difficult to prepare and handle, corrosive to most metals, and become dehydrated if kept under vacuum conditions at room temperature. We have developed a magnetic thermometer using dilute magnetic alloys of Mn or Fe dissolved in a pure Pd matrix. These metallic thermometers are easy to fabricate, chemically inert, and mechanically robust. Unlike salts, they may be directly soldered to the stage to be measured. Also, the Curie temperature can be varied by changing the concentration of Fe or Mn, making them available for use in a wide temperature range. Susceptibility measurements, as well as preliminary noise and drift measurements, show them to have sub-nK resolution with a drift of less than 10{sup {minus}13} K/s.

Abstract not provided.

The constitutive model used to describe the deformation of crushed salt is presented in this report. Two mechanisms -- dislocation creep and grain boundary diffusional pressure solution -- are combined to form the basis for the constitutive model governing the deformation of crushed salt. The constitutive model is generalized to represent three-dimensional states of stress. Upon complete consolidation, the crushed-salt model reproduces the Multimechanism Deformation (M-D) model typically used for the Waste Isolation Pilot Plant (WIPP) host geological formation salt. New shear consolidation tests are combined with an existing database that includes hydrostatic consolidation and shear consolidation tests conducted on WIPP and southeastern New Mexico salt. Nonlinear least-squares model fitting to the database produced two sets of material parameter values for the model -- one for the shear consolidation tests and one for a combination of the shear and hydrostatic consolidation tests. Using the parameter values determined from the fitted database, the constitutive model is validated against constant strain-rate tests. Shaft seal problems are analyzed to demonstrate model-predicted consolidation of the shaft seal crushed-salt component. Based on the fitting statistics, the ability of the model to predict the test data, and the ability of the model to predict load paths and test data outside of the fitted database, the model appears to capture the creep consolidation behavior of crushed salt reasonably well.

Abstract not provided.

Abstract not provided.

The conference consisted of two sessions with the following subtopics: (1) Heterogeneous Session: Novel Catalytic Materials; Photocatalysis; Novel Processing Conditions; Metals and Sulfides; Nuclear Magnetic Resonance; Metal Oxides and Partial Oxidation; Electrocatalysis; and Automotive Catalysis. (2) Homogeneous Catalysis: H-Transfer and Alkane Functionalization; Biocatalysis; Oxidation and Photocatalysis; and Novel Medical, Methods, and Catalyzed Reactions.

Three-dimensional finite element analyses were performed for the two gas-filled storage caverns at the Egan field, Jennings dome, Louisiana. The effects of cavern enlargement on surface subsidence, storage loss, and cavern stability were investigated. The finite element model simulated the leaching of caverns to 6 and 8 billion cubic feet (BCF) and examined their performance at various operating conditions. Operating pressures varied from 0.15 psi/ft to 0.9 psi/ft at the bottom of the lowest cemented casing. The analysis also examined the stability of the web or pillar of salt between the caverns under differential pressure loadings. The 50-year simulations were performed using JAC3D, a three dimensional finite element analysis code for nonlinear quasistatic solids. A damage criterion based on onset of dilatancy was used to evaluate cavern instability. Dilation results from the development of microfractures in salt and, hence, potential increases in permeability onset occurs well before large scale failure. The analyses predicted stable caverns throughout the 50-year period for the range of pressures investigated. Some localized salt damage was predicted near the bottom walls of the caverns if the caverns are operated at minimum pressure for long periods of time. Volumetric cavern closures over time due to creep were moderate to excessive depending on the salt creep properties and operating pressures. However, subsidence above the cavern field was small and should pose no problem, to surface facilities.

Composite doublers, or repair patches, provide an innovative repair technique which can enhance the way aircraft are maintained. Instead of riveting multiple steel or aluminum plates to facilitate an aircraft repair, it is possible to bond a single Boron-Epoxy composite doubler to the damaged structure. Most of the concerns surrounding composite doubler technology pertain to long-term survivability, especially in the presence of non-optimum installations, and the validation of appropriate inspection procedures. This report focuses on a series of full-scale structural and nondestructive inspection (NDI) tests that were conducted to investigate the performance of Boron-Epoxy composite doublers. Full-scale tests were conducted on fuselage panels cut from retired aircraft. These full-scale tests studied stress reductions, crack mitigation, and load transfer capabilities of composite doublers using simulated flight conditions of cabin pressure and axial stress. Also, structures which modeled key aspects of aircraft structure repairs were subjected to extreme tension, shear and bending loads to examine the composite laminate's resistance to disbond and delamination flaws. Several of the structures were loaded to failure in order to determine doubler design margins. Nondestructive inspections were conducted throughout the test series in order to validate appropriate techniques on actual aircraft structure. The test results showed that a properly designed and installed composite doubler is able to enhance fatigue life, transfer load away from damaged structure, and avoid the introduction of new stress risers (i.e. eliminate global reduction in the fatigue life of the structure). Comparisons with test data obtained prior to the doubler installation revealed that stresses in the parent material can be reduced 30%--60% through the use of the composite doubler. Tests to failure demonstrated that the bondline is able to transfer plastic strains into the doubler and that the parent aluminum skin must experience significant yield strains before any damage to the doubler will occur.

The committee regards Sandia's Microelectronics and Photonics Program as a vital and strategic resource for the nation. The Microsystems (MEMS) and Chem Lab programs were assessed as unique and best-in-class for the development of significant application areas. They contribute directly to the Sandia mission and impact the development of new commercial areas. The continued development and integration of Radiation hard silicon integrated circuits, micromechanical systems, sensors, and optical communications is essential to the national security mission. The quality of the programs is excellent to outstanding overall. MEMS and Chem Lab activities are examples of outstanding programs. The committee was pleased to see the relationship of the microelectronics development programs to applications in the mission. In a future review the committee would like to see Sandia's research programs and a vision for connectivity to potential national security needs. (This review may be based on analysis and assumptions about the strategic needs of the nation.) In summary, the Microelectronics and Photonics capability affords Sandia the opportunity to deliver exceptional service in the national interest across broad technology areas. The presentations were excellent and well integrated. We received ample pre-reading materials, expectations were well set and the documents were high quality. The committee was provided an agenda with sufficient time among us and some selected one-on-one time with the researchers. The composition of the committee held representation from industry, universities and government. Committee contributions were well balanced and worked as a team. However, the committee was disappointed that no member of Sandia executive management was able to be present for the readout and final debriefing. (A late, higher priority conflict developed.) The members of the EST Program and the committee put substantial effort into the review but a written report like this one is not a substitute for direct feedback in helping SNL leadership assess the value of these programs.

An automated system is described for the sensor-based precision docking and manipulation of large objects. Past work in the remote handling of large nuclear waste containers is extendable to the problems associated with the handling of large objects such as steel coils. Computer vision and ultrasonic proximity sensing are used to control the precision docking of large objects, and swing-damped motion control of overhead cranes is used to control the position of the pickup device and suspended payload during movement. Real-time sensor processing and model-based control are used to accurately position payloads.

On September 24, 25, 28, and 29, 1998 and on October 19 and 23, 1998, transfer impedance measurements were made on Los Alamos National Laboratories TA 16 - Building 411 and TA 8-- Building 23 to characterize their interior open-circuit voltage response to a direct lightning flash attachment to the structures. The theory, history, measurement methods and equipment, and specific measured results are detailed. The measured results demonstrate that if the remaining metallic penetrations are bonded, then the rebar of the two structures is sufficiently well connected to form a Faraday cage that reduces the maximum open-circuit voltage inside the structure to a sufficiently low level that the required standoff distance to prevent arcing to explosive assemblies is 6.8 inches for TA 16 - Building 411 and is 11.5 inches for TA 8 - Building 23.

A human outpost on Mars requires plentiful power to assure survival of the astronauts. Anywhere from 50 to 500 kW of electric power (kWe) will be needed, depending on the number of astronauts, level of scientific activity, and life-cycle closure desired. This paper describes a 250-kWe power system based on a gas-cooled nuclear reactor with a recuperated closed Brayton cycle conversion system. The design draws upon the extensive data and engineering experience developed under the various high-temperature gas cooled reactor programs and under the SP-100 program. The reactor core is similar in power and size to the research reactors found on numerous university campuses. The fuel is uranium nitride clad in Nb1%Zr, which has been extensively tested under the SP-I 00 program. The fuel rods are arranged in a hexagonal array within a BeO block. The BeO softens the spectrum, allowing better use of the fuel and stabilizing the geometry against deformation during impact or other loadings. The system has a negative temperature feedback coefficient so that the power level will automatically follow a variable load without the need for continuous adjustment of control elements. Waste heat is removed by an air-cooled heat exchanger using cold Martian air. The amount of radioactivity in the reactor at launch is very small (less than a Curie, and about equal to a truckload of uranium ore). The system will need to be engineered so that criticality cannot occur for any launch accident. This system is also adaptable for electric propulsion or life-support during transit to and from Mars.

Thermally stimulated current and capacitance voltage methods are used to investigate the thermal stability of trapped electrons associated with radiation-induced trapped positive charge in metal-oxide-semiconductor capacitors. The density of deeply trapped electrons in radiation-hardened 45 nm oxides exceeds that of shallow electrons by a factor of {approximately}3 after radiation exposure, and by up to a factor of 10 or more during biased annealing. Shallow electron traps anneal faster than deep traps, and seem to be at least qualitatively consistent with the model of Lelis et al. Deeper traps maybe part of a fundamentally distinct dipole complex, and/or have shifted energy levels that inhibit charge exchange with the Si.

To date, few researchers have solved three-dimensional free-surface problems with dynamic wetting lines. This paper extends the free-surface finite element method described in a companion paper [Cairncross, R.A., P.R. Schunk, T.A. Baer, P.A. Sackinger, R.R. Rao, "A finite element method for free surface flows of incompressible fluid in three dimensions, Part I: Boundary-Fitted mesh motion.", to be published (1998)] to handle dynamic wetting. A generalization of the technique used in two dimensional modeling to circumvent double-valued velocities at the wetting line, the so-called kinematic paradox, is presented for a wetting line in three dimensions. This approach requires the fluid velocity normal to the contact line to be zero, the fluid velocity tangent to the contact line to be equal to the tangential component of web velocity, and the fluid velocity into the web to be zero. In addition, slip is allowed in a narrow strip along the substrate surface near the dynamic contact line. For realistic wetting-line motion, a contact angle which varies with wetting speed is required because contact lines in three dimensions typically advance or recede a different rates depending upon location and/or have both advancing and receding portions. The theory is applied to capillary rise of static fluid in a corner, the initial motion of a Newtonian droplet down an inclined plane, and extrusion of a Newtonian fluid from a nozzle onto a moving substrate. The extrusion results are compared to experimental visualization. Subject Categories

The band gap of AlXGal.XN is measured for the composition range 0s<0.45; the resulting bowing parameter, b=+O.69 eV, is compared to 20 previous works. A correlation is found between the measured band gaps and the methods used for epitaxial growth of the AlXGal_XN: directly nucleated or buffered growths of AlXGal-XN initiated at temperatures T>800 C on sapphire usually lead to stronger apparent bowing (b> +1.3 eV); while growths initiated using low-temperature buffers on sapphire, followed by high-temperature growth, lead to weaker bowing (b<+ 1.3 eV). Extant data suggests that the correct band-gap bowing parameter for AlXGal-XN is b=+O.62 (N.45) eV.

Let me begin with some comments about transparency. We all have some perception or vision about the use of transparency for nuclear technology and nuclear non-proliferation. Although we probably have some common understanding of what it implies, there is no precise definition that is agreed upon. One of the most significant ideas in transparency is that it is considered to be a voluntary or unilateral action. The party, or organization, or nation that wants its activities to be transparent voluntarily provides information to other parties with the expectation of receiving some acceptance or good will in return. The organization giving the information determines what information to provide, how much, how often, and when. This is in contrast to official treaties and monitoring regimes, in which specific verification information and activities are prescribed. This should have the advantage for the transparent organization of being less intrusive and less costly than a treaty monitoring regime. Information related to sensitive nuclear technology, proprietary processes, and physical security is more easily protected. The difficultly for both parties, the transparent organization and the information recipients, is in determining what information is necessary for the desired confidence building. It must be recognized that this state of transparency or confidence will only be achieved over an extended period of time, when history confirms that the information was reliable in conveying the true picture.

In industry, the need to maximize energy efficiency depends on the availability of suitable advanced materials. Ceramic composites are exemplary materials for many advanced engineering applications because they exhibit good thermal stability, oxidation resistance and enhanced toughness. Presently, ceramic composite fabrication processes are costly, often requiring high temperatures and pressures to achieve reasonable densities. Our research is focused on developing a processing technique, that will allow production of alumina/aluminum composites using relatively low temperatures and without the application of an external force, thus reducing the processing costs. Our composites were formed using Reactive Metal Penetration (RMP), which is a process involving the reaction of molten Al with a dense ceramic preform. The result is a near net shape ceramic/metal composite with interpenetrating phases. The volume fraction of metal in the composites was varied by doping an aluminosilicate ceramic preform with silica. For this study we fabricated composites using pure mullite and mullite doped with 23 and 42 weight percent silica, yielding 18, 25, and 30 volume percent metal in the composites, respectively. Optical and Scanning Electron Microscopy were used to characterize the homogeneity and scale of the microstructure. The scale of the microstructure varied with preform composition, the reaction temperature and with secondary heat treatments. Four-point bend testing was used to evaluate the influence of microstructure on strength and reliability. During these studies a gradient in the microstructure was observed, which we further characterized using microhardness testing. Alumina/aluminum composites formed by RMP show higher toughness then monolithic alumina and have the potential for improved reliability when compared to monolithic ceramics.

In May of 1998, a technical basis and implementation guidelines document for A Technique for Human Event Analysis (ATHEANA) was issued as a draft report for public comment (NUREG-1624). In conjunction with the release of draft NUREG- 1624, a peer review of the new human reliability analysis method its documentation and the results of an initial test of the method was held over a two-day period in June 1998 in Seattle, Washington. Four internationally known and respected experts in HK4 or probabilistic risk assessment were selected to serve as the peer reviewers. In addition, approximately 20 other individuals with an interest in HRA and ATHEANA also attended the peer and were invited to provide comments. The peer review team was asked to comment on any aspect of the method or the report in which improvements could be made and to discuss its strengths and weaknesses. They were asked to focus on two major aspects: Are the basic premises of ATHEANA on solid ground and is the conceptual basis adequate? Is the ATHEANA implementation process adequate given the description of the intended users in the documentation? The four peer reviewers asked questions and provided oral comments during the peer review meeting and provided written comments approximately two weeks after the completion of the meeting. This paper discusses their major comments.

This paper explores the geometrical errors that reduce heliostat tracking accuracy at Solar Two. The basic heliostat control architecture is described. Then, the three dominant error sources are described and their effect on heliostat tracking is visually illustrated. The strategy currently used to minimize, but not truly correct, these error sources is also shown. Finally, a novel approach to minimizing error is presented.

Abstract not provided.

The electrostriction of composites consisting of dielectric particles embedded in a gel or elastomer is discussed. It is shown that when these particles are organized by a uniaxial field before gelation, the resulting field-structured composites are expected to exhibit enhanced electrostriction in a uniform field applied along the same axis as the structuring field. The associated stresses might be large enough to form the basis of a polymer-based fast artificial muscle.

The advent of the 20-MA Z accelerator [R.B. Spielman, C. Deeney, G.A. Chandler, et al., Phys. Plasmas 5, 2105, (1997)] has enabled implosions of large diameter, high-wire-number arrays of titanium to begin testing Z-pinch K-shell scaling theories. The 2-cm long titanium arrays, which were mounted on a 40-mm diameter, produced between 75{+-}15 to 125{+-}20 kJ of K-shell x-rays. Mass scans indicate that, as predicted, higher velocity implosions in the series produced higher x-ray yields. Spectroscopic analyses indicate that these high velocity implosions achieved peak electron temperatures from 2.7{+-}0.1 to 3.2{+-}0.2 keV and obtained a K-shell emission mass participation of up to 12%.

Shock-wave experiments on iron preheated to 1,573 K conducted from 14 to 73 GPa, yield new data for sound velocities of the {gamma}- and liquid-phases. Melting was observed in the highest pressure ({approximately} 71 {+-} 2 GPa) experiments at calculated shock temperatures of 2,775 {+-} 160 K. This single crossing of the {gamma}-liquid boundary measured here agrees closely with the {gamma}-iron melting line determined by Boehler [1993], Saxena et al. [1993], and Jephcoat and Besedin [1997]. This {gamma}-iron melting curve is {approximately} 300 C lower than that of Shen et al. [1998b] at 80 GPa.

In this paper we describe a unified, hierarchical computational approach to aging and reliability problems caused by materials changes in the oxide layers of Si-based microelectronic devices. We apply this method to a particular low-dose-rate radiation effects problem

A response surface methodology-based technique is presented for treating discretization error in non-deterministic analysis. The response surface, or metamodel, is estimated from computer experiments which vary both uncertain physical parameters and the fidelity of the computational mesh. The resultant metamodel is then used to propagate the variabilities in the continuous input parameters, while the mesh size is taken to zero, its asymptotic limit. With respect to mesh size, the metamodel is equivalent to Richardson extrapolation, in which solutions on coarser and finer meshes are used to estimate discretization error. The method is demonstrated on a one dimensional prismatic bar, in which uncertainty in the third vibration frequency is estimated by propagating variations in material modulus, density, and bar length. The results demonstrate the efficiency of the method for combining non-deterministic analysis with error estimation to obtain estimates of total simulation uncertainty. The results also show the relative sensitivity of failure estimates to solution bias errors in a reliability analysis, particularly when the physical variability of the system is low.

In this paper we evaluate the design of the hybrid evolutionary algorithms (EAs) that are currently used to perform flexible ligand binding in the Autodock docking software. Hybrid EAs incorporate specialized operators that exploit domain-specific features to accelerate an EA's search. We consider hybrid EAs that use an integrated local search operator to reline individuals within each iteration of the search. We evaluate several factors that impact the efficacy of a hybrid EA, and we propose new hybrid EAs that provide more robust convergence to low-energy docking configurations than the methods currently available in Autodock.

Precision high aspect-ratio micro molds constructed by deep x-ray lithography have been used to batch fabricate accurately shaped bonded rare-earth based permanent magnets with features as small as 5 microns and thicknesses up to 500 microns. Maximum energy products of up to 8 MGOe have been achieved with a 20%/vol. epoxy bonded melt-spun isotropic Nd2Fe14b powder composite. Using individually processed sub- millimeter permanent sections multipole rotors have been assembled. Despite the fact that these permanent magnet structures are small, their magnetic field producing capability remains the same as at any scale. Combining permanent magnet structures with soft magnetic materials and micro-coils makes possible new and more efficient magnetic microdevices.

A test technique has been devised which is suitable for the testing of the bond strength of batch diffusion bonded LIGA or DXRL defined structures. The method uses a torsion tester constructed with the aid of LIGA fabrication and distributed torsion specimens which also make use of the high aspect ratio nature of DXRL based processing. Measurements reveal achieved bond strengths of 130MPa between electroplated nickel with a bond temperature of 450 C at 7 ksi pressure which is a sufficiently low temperature to avoid mechanical strength degradation.

A technique using diffusion bonding (or solid-state welding) has been used to achieve batch fabrication of two- level nickel LIGA structures. Interlayer alignment accuracy of less than 1 micron is achieved using press-fit gauge pins. A mini-scale torsion tester was built to measure the diffusion bond strength of LIGA formed specimens that has shown successful bonding at temperatures of 450"C at 7 ksi pressure with bond strength greater than 100 Mpa. Extensions to this basic process to allow for additional layers and thereby more complex assemblies as well as commensurate packaging are discussed.

Oxidation of layers of high-Al-content III-V materials by water vapor has become the enabling process for high-efficiency vertical cavity surface emitting lasers (VCSELS) and has potential applications for reducing substrate current leakage in GaAs-on-insulator (GOI) MESFETS. Because of the established importance of wet oxidation in optoelectronic devices and its potential applications in electronic devices, it has become increasingly important to understand the mechanism of wet oxidation and how it might be expected to affect both the fabrication and subsequent operation of devices that have been made using this technique. The mechanism of wet oxidation and the consequence of this mechanism for heterostructure design and ultimate device operation are discussed here.

Engineering systems are becoming increasingly complex as state of the art technologies am incorporated into designs. Surety modeling and analysis is an emerging science that permits an engineer to qualitatively and quantitatively predict and assess the completeness and predictability of a design. Surety is a term often used in the Department of Defense (DoD) and Department of Energy (DOE) communities, which refers to the integration of safety, security, reliability and performance aspects of design. Current risk assessment technologies for analyzing complex systems fail to adequately describe the problem, thus making assessment fragmented and non-integrated. To address this problem, we have developed a methodology and extensible software tool set to address model integration and complexity for high consequence systems. The MultiGraph Architecture (MGA) facilitates multi-domain, model-integrated modeling and analyses of complex, high-assurance systems. The MGA modeling environment allows the engineer to customize the modeling environment to match a design paradigm representative of the actual design. Previous modeling tools have a point-defined model space that forms the modeler to work in less than optimal environments. Current approaches for the problem to be bounded and constrained by requirements of the modeling tool and not the actual design problem. In some small cases, this is only maximally adequate MM facilitates the implementation of a surety methodology, which is used to represent high assurance systems with respect to safety and reliability. Formal mathematical models am used to correctly describe design safety and reliability functionality and behavioral fictional and behavioral representations of the design w then analyzed using commercial-off-the-shelf tools.

The authors have used low-energy electron microscopy to investigate the dynamics of the Si(111) 7 x 7 {r_arrow} 1 x 1 phase transition. Because the densities of the two phases differ, the phase transformation is analogous to precipitation in bulk systems: additional material must diffuse to the phase boundaries in order for the transformation to occur. By measuring the size evolution of an ensemble of domains, and comparing the results to simulations, they have identified a new mechanism of precipitate growth. The source of material necessary for the transformation is the random creation of atom/vacancy pairs at the surface. This mechanism contrasts sharply with classical theories of precipitation, in which mass transport kinetics determine the rate of transformation.

Relative concentrations of reactive ions, neutral radicals, resist and substrate etch products have been measured in dielectric etch chemistries using an uncollided beam mass spectrometer / ion extractor from Hiden Analytical. Analysis techniques employed include both electron impact ionization and dissociative ionization of neutral gas, and potential bias extraction of positive ions from the reactor discharge volume. Measurements were made in C{sub 2}F{sub 6} and CHF{sub 3} discharges in an inductively coupled plasma (ICP-GEC) research reactor operating with power densities, pressures, gas compositions and wafer materials typical of those found in etch processing tools. Wafer substrates investigated included blanket silicon wafers and silicon wafers with varying amounts of photo-resist coverage of the surface (20%, 80% and 100%). In C{sub 2}F{sub 6} discharges CF{sub 3}{sup +} was consistently the dominant fluorocarbon ion present, in agreement with published cross sections for dissociative ionization [ 1,2.3,4.5,6]. Smaller concentrations of CF+, CF{sub 2}{sup -}, and C{sub 2}F{sub 5}{sup +}, were also observed, though the dissociative ionization production of C{sub 2}F{sub 5}{sup +} was a factor of five smaller than would be expected from published cross section values. The presence of photo-resist, even in small amounts, was found to produce marked changes in the discharge composition. For example in C{sub 2}F{sub 6} discharges, concentrations of SiF{sub x} etch products relative to concentrations of C{sub x}F{sub y} species were notably diminished and larger concentrations of water vapor were observed when resist was present. In CHF{sub 3} discharges, CF{sub 3}{sup +} and CHF{sub 2}{sup +} were found to be the main species present, along with smaller concentrations of CF{sub 2}{sup +}, CF{sup +}, CHF{sup +}, CH{sup +} and F{sup -}.

We show that the signal and idler beams generated by certain types of unseeded, nanosecond optical parametric oscillators are tilted and angularly dispersed and have anomalously large bandwidths. This effect is demonstrated in both laboratory measurements and a numerical model. We show how the optical cavity design influences the tilts and how they can be eliminated or minimized. We also determine the conditions necessary to injection seed these parametric oscillators.

Galerkin methods are used in separable Hilbert spaces to construct and compute L{sup 2} [0,{pi}] solutions to large classes of differential equations. In this note a Galerkin method is used to construct series solutions of a nonhomogeneous Sturm-Liouville problem defined on [0,{pi}]. The series constructed are shown to converge to a specified du Bois-Reymond function f in L{sup 2} [0,{pi}]. It is then shown that the series solutions can be made to converge uniformly to the specified du Bois-Reymond function when averaged by the Ces{'a}ro-one summability method. Therefore, in the Ces{'a}ro-one sense, every continuous function f on [0,{pi}] is the uniform limit of solutions of nonhomogeneous Sturm-Liouville problems.

The papers in this special issue have been selected from the systems and balance-of- systems sessions at the 1998 Photovoltaic Performance and Reliability Workshop. The workshop was held November 3-5, 1998 and hosted by the Florida Solar Energy Center, Cocoa Beach, Florida under sponsorship of the US National Center for Photovoltaics (National Renewable Energy Laboratory and Sandia National Laboratories). The topics and issues addressed by these papers were identified in an invited review paper on PV systems by the guest editors. Their work was published earlier this year in Volume 7, Number 1 of Progress in Photovoltaics ('Photovoltaic Systems: An End-of-Millennium Review'). Experts in the PV community were asked to make presentations on these topics at the workshop. The papers that follow are the results of that effort. The papers are organized by topic: (1) codes and standards; (2) reliability; (3) design issues; and (4) commercialization.

Article 690, Solar Photovoltaic Power Systems, has been in the National Electrical Code (NEC) since 1984. An NFPA-appointed Task Group for Article 690 proposed changes to Article 690 for both the 1996 and 1999 codes. The Task Group, supported by more than 50 professionals from throughout the photovoltaic (PV) industry, met seven times during the 1999 code cycle to integrate the needs of the industry with the needs of electrical inspectors and end users to ensure the safety of PV systems. The Task Group proposed 57 changes to Article 690, and all the changes were accepted in the review process. The performance and cost of PV installations were always a consideration as these changes were formed but safety was the number-one priority. All of the proposals were well substantiated and coordinated throughout the PV industry and with representatives of Underwriters Laboratories, Inc (UL). The most significant changes that were made in Article 690 for the 1999 NEC along with some of the rationale are discussed in the remainder of this article.

A metal ion sensitive, fluorescent lipid-b i layer material (5oA PSIDA/DSPC) was successfully immobilized in a silica matrix using a tetramethoxysilane (TMOS) sol-gel procedure. The sol-gel immobilization method was quantitative in the entrapment of seif-assembled Iipid-bilayers and yielded thin films for facile configuration to optical fiber piatforms. The silica matrix was compatible with the solvent sensitive lipid bilayers and provided physical stabilization as well as biological protection. Immobilization in the silica sol-gel produced an added benefit of improving the bilayer's metal ion sensitivity by up to two orders of magnitude. This enhanced performance was attributed to a preconcentrator effect from the anionic surface of the silica matrix. Thin gels (193 micron thickness) were coupled to a bifurcated fiber optic bundle to produce a metal ion sensor probe. Response times of 10 - 15 minutes to 0.1 M CUCIZ were realized with complete regeneration of the sensor using an ethylenediarninetetraacetic acid (EDTA) solution.

We have developed instrumentation to enable the combination of surface acoustic wave (SAW) sensor measurements with direct, in-situ molecular spectroscopic measurements to understand the response of the SAW sensors with respect to the interfacial chemistry of surface-confined sensing films interacting with gas-phase analytes. Specifically, the instrumentation and software was developed to perform in-situ Fourier-transform infrared external-reflectance spectroscopy (FTIR-ERS) on operating SAW devices during dosing of their chemically modified surfaces with analytes. By probing the surface with IR spectroscopy during gas exposure, it is possible to understand in unprecedented detail the interaction processes between the sorptive SAW coatings and the gaseous analyte molecules. In this report, we provide details of this measurement system, and also demonstrate the utility of these combined measurements by characterizing the SAW and FTIR-ERS responses of organic thin-film sensor coatings interacting with gas-phase analytes.

Arrays of unheated chemically sensitive resistors (chemiresistors) can serve as extremely small, low-power-consumption sensors with simple read-out electronics. We report here results on carbon-loaded polymer composites, as well as polymeric ionic conductors, as chemiresistor sensors. We use the volubility parameter concept to understand and categorize the chemiresistor responses and, in particular, we compare chemiresistors fabricated from polyisobutylene (PIB) to results from PIB-coated acoustic wave sensors. One goal is to examine the possibility that a small number of diverse chemiresistors can sense all possible solvents-the "Universal Solvent Sensor Array". keywords: chemiresistor, volubility parameter, chemical sensor

The effects of nitrided SiO{sub 2}/Si(100) interfaces upon cycling endurance in silicon-oxide-nitride-oxide-silicon (SONOS) non-volatile memory transistors are investigated. Analysis of MOSFET sub-threshold characteristics indicate cycling degradation to be a manifestation of interface state (D{sub it}) generation at the tunnel oxide/silicon interface. After 10{sup 6} write/erase cycles, SONOS film stacks prepared with nitrided tunnel oxides exhibit enhanced cycling endurance with {Delta}D{sub it}=3x10{sup 12} V{sup -1}cm{sup -2}, compared to {Delta}D{sub it}=2x10{sup 13} V{sup -l}cm{sup -2} for non-nitrided tunnel oxides. Additionally, if the capping oxide is formed by steam oxidation, rather than by deposition, SONOS stacks prepared with non-nitrided tunnel oxides exhibit endurance characteristics similar to stacks with nitrided tunnel oxides. From this observation it is concluded that latent nitridation of the tunnel oxidehilicon interface occurs during steam oxide cap formation.

Growth kinetics, mechanisms, and material quality in GaN epitaxial lateral over-growth (ELO) were examined using a single mask of systematically varied patterns. A 2-D gas phase reaction/diffusion model describes how transport of the Ga precursor to the growth surface enhances the lateral rate in the early stages of growth. In agreement with SEM studies of truncated growth runs, the model also predicts the dramatic decrease in the lateral rate that occurs as GaN over-growth reduces the exposed area of the mask. At the point of convergence, a step-flow coalescence mechanism is observed to fill in the area between lateral growth-fronts. This alternative growth mode in which a secondary growth of GaN is nucleated along a single convergence line, may be responsible for producing smooth films observed to have uniform cathodoluminescence (CL) when using 1{micro}m nucleation zones. Although emission is comprised of both UV ({approximately}365nm) and yellow ({approximately}550nm) components, the spectra suggest these films have reduced concentrations of threading dislocations normally associated with non-radiative recombination centers and defects known to accompany growth-front convergence lines.

The National Electrical Code@ (NEC@) focuses primarily on electrical system installation requirements in the U.S. The NEC addresses both fire and personnel safety. This paper will describe recent efforts of the PV industry in the U.S. and the resulting requirements in the 1999 National Electrical Code-- Article 690 --Solar Photovoltaic Systems. The Article 690 requirements spell out the PV-unique requirements for safe installations of PV systems in the U.S.A. This paper provides an overview of the most significant changes that appear in Article 690 of the 1999 edition of the NEC. The related and coordinated efforts of the other standards- making groups will also be briefly reviewed.

Using surface micromachined samples, we demonstrate the accurate measurement of cantilever beam adhesion by using test structures which are adhered over long attachment lengths. We show that this configuration has a deep energy well, such that a fracture equilibrium is easily reached. When compared to the commonly used method of determining the shortest attached beam, the present method is much less sensitive to variations in surface topography or to details of capillary drying.

Abstract not provided.

Over the past decade, Sandia National Laboratories has been involved in the development of receivers to transfer energy from the focus of a parabolic dish concentrator to the heater tubes of a Stirling engine. Through the isothermal evaporation and condensation of sodium. a heat-pipe receiver can efficiently transfer energy to an engine's working fluid and compensate for irregularities in the flux distribution that is delivered by the concentrator. The operation of the heat pipe is completely passive because the liquid sodium is distributed over the solar-heated surface by capillary pumping provided by a wick structure. Tests have shown that using a heat pipe can boost the system performance by twenty percent when compared to directly illuminating the engine heater tubes. Designing heat pipe solar receivers has presented several challenges. The relatively large area ({approximately}0.2 m{sup 2}) of the receiver surface makes it difficult to design a wick that can continuously provide liquid sodium to all regions of the heated surface. Selecting a wick structure with smaller pores will improve capillary pumping capabilities of the wick, but the small pores will restrict the flow of liquid and generate high pressure drops. Selecting a wick that is comprised of very tine filaments can increase the permeability of the wick and thereby reduce flow losses, however, the fine wick structure is more susceptible to corrosion and mechanical damage. This paper provides a comprehensive review of the issues encountered in the design of heat pipe solar receivers and solutions to problems that have arisen. Topics include: flow characterization in the receiver, the design of wick systems. the minimization of corrosion and dissolution of metals in sodium systems. and the prevention of mechanical failure in high porosity wick structures.

High integrity/high consequence systems must be safe and reliable; hence it is only logical that both software safety and software reliability cases should be developed. Risk assessments in safety cases evaluate the severity of the consequences of a hazard and the likelihood of it occurring. The likelihood is directly related to system and software reliability predictions. Software reliability cases, as promoted by SAE JA 1002 and 1003, provide a practical approach to bridge the gap between hardware reliability, software reliability, and system safety and reliability by using a common methodology and information structure. They also facilitate early insight into whether or not a project is on track for meeting stated safety and reliability goals, while facilitating an informed assessment by regulatory and/or contractual authorities.

The Boeing Company's Dish Engine Critical Component (DECC) project started in April of 1998. It is a continuation of a solar energy program started by McDonnell Douglas (now Boeing) and United Stirling of Sweden in the mid 1980s. The overall objectives, schedule, and status of this project are presented in this paper. The hardware test configuration, hardware background, operation, and test plans are also discussed. A summary is given of the test data, which includes the daily power performance, generated energy, working-gas usage, mirror reflectivity, solar insolation, on-sun track time, generating time, and system availability. The system performance based upon the present test data is compared to test data from the 1984/88 McDonnell Douglas/United Stirling AB/Southem California Edison test program. The test data shows that the present power, energy, and mirror performance is comparable to when the hardware was first manufactured 14 years ago.

Motion detectors consisting of Pb(Zr{sub x}Ti{sub (1{minus}x)})O{sub 3} (PZT) thin films, between platinum electrodes, on micromachined silicon compound clamped-clamped or cantilever beam structures were fabricated using either hot KOH or High Aspect Ratio Silicon Etching (HARSE) to micromachine the silicon. The beams were designed such that a thicker region served as a test mass that produced stress at the top of the membrane springs that supported it when the object to which the detector was mounted moved. The PZT film devices were placed on these membranes to generate a charge or a voltage in response to the stress through the piezoelectric effect. Issues of integration of the PZT device fabrication process with the two etching processes are discussed. The effects of PZT composition and device geometry on the response of the detectors to motion is reported and discussed.

We have developed a variety of processes for fabricating components for micro devices based on deep x-ray lithography (DXRL). Although the techniques are applicable to many materials, we have demonstrated them using hard (Nd{sub 2}Fe{sub 14}B) and soft (Ni-Zn ferrite) magnetic materials because of the importance of these materials in magnetic micro-actuators and other devices and because of the difficulty fabricating them by other means. The simplest technique involves pressing a mixture of magnetic powder and a binder into a DXRL-formed mold. In the second technique, powder is pressed into the mold and then sintered to densify. The other two processes involve pressing at high temperature either powder or a dense bulk material into a ceramic mold that was previously made using a DXRL mold. These techniques allow arbitrary 2-dimensional shapes to be made 10 to 1000 micrometers thick with in-plane dimensions as small as 50 micrometers and dimensional tolerances in the micron range. Bonded isotropic Nd{sub 2}Fe{sub 14}B micromagnets made by these processes had an energy product of 7 MGOe.

This Institutional Plan is the most comprehensive yearly "snapshot" available of Sandia National Laboratories' major programs, facilities, human resources, and budget. The document also includes overviews of our missions, organization, capabilities, planning functions, milestones, and accomplishments. The document's purpose is to provide the above information to the US Department of Energy, key congressional committees, Sandia management, and other present and potential customers. Chapter 2 presents information about Sandia's mission and summarizes our recent revision of Sandia's Strategic Plan. Chapter 3 presents an overview of Sandia's strategic objectives, chapter 4 lists laboratory goals and milestones for FY 1999, and chapter 5 presents our accomplishments during FY 1998. Chapters 3 through 5 are organized around our eight strategic objectives. The four primary objectives cover nuclear weapons responsibilities, nonproliferation and materials control, energy and critical infrastructures, and emerging national security threats. The major programmatic initiatives are presented in chapter 7. However, the programmatic descriptions in chapter 6 and the Associated funding tables in chapter 9 continue to be presented by DOE Budget and Reporting Code, as in previous Sandia institutional plans. As an aid to the reader, the four primary strategic objectives in chapter 3 are cross-referenced to the program information in chapter 6.

Mining has always had an important influence on cultures and traditions of communities around the globe and throughout history. Today, because mining legislation places heavy emphasis on environmental protection, there is great interest in having a comprehensive understanding of ancient mining and mining sites. Multi-disciplinary approaches (i.e., Pb isotopes as tracers) are being used to explore the distribution of metals in natural environments. Another successful approach is to model solution migration numerically. A proven method to simulate solution migration in natural rock salt has been applied to project through time for 10,000 years the system performance and solution concentrations surrounding a proposed nuclear waste repository. This capability is readily adaptable to simulate solution migration around mining.

While many research and development activities take place at Sandia National Laboratories' Intelligent Systems and Robotics Center (ISRC), where the "rubber meets the road" is in the ISRC'S delivered systems. The ISRC has delivered several systems over the last few years that handle hazardous materials on a daily basis, and allow human workers to move to a safer, supervisory role than the "hands-on" operations that they used to perform. The ISRC at Sandia performs a large range of research and development activities, including development and delivery of one-of-a-kind robotic systems for use with hazardous materials. Our mission is to create systems for operations where people can't or don't want to perform the operations by hand, and the systems described in this article are several of our first-of-a-kind deliveries to achieve that mission.

Many applications produce three-dimensional points that must be further processed to generate a surface. Surface reconstruction algorithms that start with a set of unorganized points are extremely time-consuming. Often, however, points are generated such that there is additional information available to the reconstruction algorithm. We present a specialized algorithm for surface reconstruction that is three orders of magnitude faster than algorithms for the general case. In addition to sample point locations, our algorithm starts with normal information and knowledge of each point's neighbors. Our algorithm produces a localized approximation to the surface by creating a star-shaped triangulation between a point and a subset of its nearest neighbors. This surface patch is extended by locally triangulating each of the points along the edge of the patch. As each edge point is triangulated, it is removed from the edge and new edge points along the patch's edge are inserted in its place. The updated edge spirals out over the surface until the edge encounters a surface boundary and stops growing in that direction, or until the edge reduces to a small hole that fills itself in.

Hydrogen-metal interaction phenomena belong to the most exciting challenges of today's physical metallurgy and physics of solids due to the uncommon behavior of hydrogen in condensed media and to the need for understanding hydrogen's strong negative impact on properties of some high-strength steels and.alloys. The paper cites and summarizes research data on fundamental thermodynamic characteristics of hydrogen in some metals that absorb it endothermally at elevated temperatures. For a number of metal-hydrogen systems, information on some phase diagrams previously not available to the English-speaking scientific community is presented.

Experimental data on directional and bulk solidification of hydrogen-charged samples of aluminum alloy A356 and nickel alloy Inconel 718 are discussed. The solidification structure of the porous zone is shown to be dependent on many process variables. Of these variables, hydrogen content in the melt prior to solidification, and furnace atmospheric pressure during solidification play the decisive role. Also important are the furnace atmosphere composition, the solidification velocity, and the temperature distribution of the liquid metal inside the mold.

With the demonstration of the viability of using the electroslag remelting process for the decontamination of radionuclides, interest has increased in examining the unique aspects associated with melting steel pipe electrodes. These electrodes consist of several nested pipes, welded concentrically to atop plate. Since these electrodes can be half as dense as a solid electrode, they present unique challenges to the standard algorithms used in controlling the melting process. Naturally the electrode must be driven down at a dramatically increased speed. However, since the heat transfer is greatly influenced and enhanced with the increased area to volume ratio, considerable variation in the melting rate of the pipes has been found. Standard control methods can become unstable as a result of the variation at increased speeds, particularly at shallow immersion depths. The key to good control lies in the understanding of the melting process. Several experiments were conducted to observe the characteristics of the melting using two different control modes. By using a pressure transducer to monitor the pressure inside the pipes, the venting of the air trapped inside the electrode was observed. The measurements reveal that for a considerable amount of time. the pipes are not completely immersed in the slag, allowing the gas inside to escape without the formation of bubbles. This result has implications for the voltage swing as well as for the decontamination reactions.

The mission of this project was to use inverse micelle solutions to synthesize nanometer sized metal particles and test the particles as catalysts in the liquefaction of coal and other related reactions. The initial focus of the project was the synthesis of iron based materials in pseudo-homogeneous form. The frost three chapters discuss the synthesis, characterization, and catalyst testing in coal liquefaction and model coal liquefaction reactions of iron based pseudo-homogeneous materials. Later, we became interested in highly dispersed catalysts for coprocessing of coal and plastic waste. Bifunctional catalysts . to hydrogenate the coal and depolymerize the plastic waste are ideal. We began studying, based on our previously devised synthesis strategies, the synthesis of heterogeneous catalysts with a bifunctional nature. In chapter 4, we discuss the fundamental principles in heterogeneous catalysis synthesis with inverse micelle solutions. In chapter 5, we extend the synthesis of chapter 4 to practical systems and use the materials in catalyst testing. Finally in chapter 6, we return to iron and coal liquefaction now studied with the heterogeneous catalysts.

The role of additive noble gases He, Ar and Xe to C&based Inductively Coupled Plasmas for etching of GaN, AIN and InN were examined. The etch rates were a strong function of chlorine concentration, rf chuck power and ICP source power. The highest etch rates for InN were obtained with C12/Xe, while the highest rates for AIN and GaN were obtained with C12/He. Efficient breaking of the 111-nitrogen bond is crucial for attaining high etch rates. The InN etching was dominated by physical sputtering, in contrast to GaN and AIN. In the latter cases, the etch rates were limited by initial breaking of the III-nitrogen bond. Maximum selectivities of -80 for InN to GaN and InN to AIN were obtained.

Sputter-deposited W-based contacts on p-GaN (N{sub A} {approximately} 10{sup 18} cm{sup {minus}3}) display non-ohmic behavior independent of annealing temperature when measured at 25 C. The transition to ohmic behavior occurs above {approximately} 250 C as more of the acceptors become ionized. The optimum annealing temperature is {approximately} 700 C under these conditions. These contacts are much more thermally stable than the conventional Ni/Au metallization, which shows a severely degraded morphology even at 700 C. W-based contacts may be ohmic as-deposited on very heavily doped n-GaN, and the specific contact resistance improves with annealing up to {approximately} 900 C.

We show that the low-temperature conductance (G) of a quantum point contact consisting of ballistic tunnel-coupled double-layer quantum well wires is modulated by an in-layer magnetic field B{sub {parallel}} perpendicular to the wires due to the anticrossing. In a system with a small g factor, B{sub {parallel}} creates a V-shaped quantum staircase for G, causing it to decrease in steps of 2e{sup 2}/{Dirac_h} to a minimum and then increase to a maximum value, where G may saturate or decrease again at higher B{sub {parallel}}'s. The effect of B{sub {parallel}}-induced mass enhancement and spin splitting is studied. The relevance of the results to recent data is discussed.

Intramolecular cyclizations during acid-catalyzed, sol-gel polymerizations of ct,co- bis(tietioxysilyl)aWmes substintidly lengtien gelties formonomers witietiylene- (l), propylene- (2), and butylene-(3)-bridging groups. These cyclizations reactions were found, using mass spectrometry and %i NMR spectroscopy, to lead preferentially to monomeric and dimeric products based on six and seven membered disilsesquioxane rings. 1,2- Bis(triethoxysilyl)ethane (1) reacts under acidic conditions to give a bicyclic drier (5) that is composed of two annelated seven membered rings. Under the same conditions, 1,3- bis(triethoxysilyl)propane (2), 1,4-bis(triethoxysilyl)butane (3), and z-1,4- bis(triethoxysilyl)but-2-ene (10) undergo an intramolecular condensation reaction to give the six membemd and seven membered cyclic disilsesquioxanes 6, 7, and 11. Subsequently, these cyclic monomers slowly react to form the tricyclic dirners 8,9 and 12. With NaOH as polymerization catalyst these cyclic silsesquioxanes readily ~aeted to afford gels that were shown by CP MAS z%i NMR and infr=d spectroscopes to retain some cyclic structures. Comparison of the porosity and microstructwe of xerogels prepared from the cyclic monomers 6 and 7 with gels prepared directly from their acyclic precursors 2 and 3, indicate that the final pore structure of the xerogels is markedly dependent on the nature of the precursor. In addition, despite the fact that the monomeric cyclic disilsesquioxane species can not be isolated from 1-3 under basic conditions due to their rapid rate of gelation, spectroscopic techniques also detected the presence of the cyclic structures in the resulting polymeric gels.

The focus of this work will be to simulate a harsh, blast environment on a space structure. Data from a reverse Hopkinson bar (RHB) test is used to generate the response to a symmetric, distributed load. The RHB generates a high-amplitude, high-frequency content, concentrated pulse that excites components at near-blast levels. The transfer functions generated at discrete points, with the RHB, are used to generate an experimental model of the structure, which is then used in conjunction with the known pressure distribution, to estimate the component response to a blast. The shock spectrum of the predicted response and the actual response compared well in two of the three cases presented.

The objectives for the ASP large early release frequency (LERF) model development work is to build a Level 2 containment response model that would capture all of the events necessary to define LERF as outlined in Regulatory Guide 1.174, can be directly interfaced with the existing Level 1 models, is technically correct, can be readily modified to incorporate new information or to represent another plant, and can be executed in SAPHIRE. The ASP LERF models being developed will meet these objectives while providing the NRC with the capability to independently assess the risk impact of plant-specific changes proposed by the utilities that change the nuclear power plants' licensing basis. Together with the ASP Level 1 models, the ASP LERF models provide the NRC with the capability of performing equipment and event assessments to determine their impact on a plant's LERF for internal events during power operation. In addition, the ASP LERF models are capable of being updated to reflect changes in information regarding the system operations and phenomenological events, and of being updated to assess the potential for early fatalities for each LERF sequence. As the ASP Level 1 models evolve to include more analysis capabilities, the LERF models will also be refined to reflect the appropriate level of detail needed to demonstrate the new capabilities. An approach was formulated for the development of detailed LERF models using the NUREG-1150 APET models as a guide. The modifications to the SAPHIRE computer code have allowed the development of these detailed models and the ability to analyze these models in a reasonable time. Ten reference LERF plant models, including six PWR models and four BWR models, which cover a wide variety of containment and nuclear steam supply systems designs, will be complete in 1999. These reference models will be used as the starting point for developing the LERF models for the remaining nuclear power plants.

Pulsed-power-driven Z pinches, produced by imploding cylindrical arrays of many wires, have generated very high x-ray radiation powers (> 200 TW) and energies (2 MJ). Experiments have revealed a steady improvement in Z-pinch performance with increasing wire number at fixed total mass and array radius. The dominant mechanism acting to limit the performance of these devices is believed to be the Rayleigh-Taylor instability which broadens the radially imploding plasma sheath and consequently reduces the peak radiation power. A model is presented which describes an amplification over the two-dimensional Rayleigh-Taylor growth rate brought about by kink-like forces on the individual wires. This amplification factor goes to zero as the number of wires approaches infinity. This model gives results which are in good agreement with the experimental data and provides a scaling for wire-array Z pinches. © 1999 American Institute of Physics.

Small, reliable chemical sensors are needed for a wide range of applications, such as weapon state-of-health monitoring, nonproliferation activities, and manufacturing emission monitoring. Significant improvements in present surface acoustic wave sensors could be achieved by developing a flexural plate-wave (FPW) architecture, in which acoustic waves are excited in a thin sensor membrane. Further enhancement of device performance could be realized by integrating a piezoelectric thin film on top of the membrane. These new FPW-piezoelectric thin film devices would improve sensitivity, reduce size, enhance ruggedness and reduce the operating frequency so that the FPW devices would be compatible with standard digital microelectronics. Development of these piezoelectric thin film // FPW devices requires integration of (1) acoustic sensor technology, (2) silicon rnicromachining techniques to fabricate thin membranes, and (3) piezoelectric thin films. Two piezoelectric thin film technologies were emphasized in this study: Pb(Zr,Ti)O{sub 3} (PZT) and AlN. PZT thin films were of sufficient quality such that the first high frequency SAW measurements on PZT thin films were measured during the course of this study. Further, reasonable ferroelectric properties were obtained from PZT films deposited on Si surface micromachined FPW device membranes. Fundamental understanding of the effect of nanodimension interfacial layers on AlN thin film domain configurations and piezoelectric response was developed. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the US Department of Energy under contract DE-AC04-94AL85000.

As part of the Laboratory-Directed Research and Development (LDRD) Program at Sandia National Laboratories, an investigation into the existence of enhanced vapor-phase diffusion (EVD) in porous media has been conducted. A thorough literature review was initially performed across multiple disciplines (soil science and engineering), and based on this review, the existence of EVD was found to be questionable. As a result, modeling and experiments were initiated to investigate the existence of EVD. In this LDRD, the first mechanistic model of EVD was developed which demonstrated the mechanisms responsible for EVD. The first direct measurements of EVD have also been conducted at multiple scales. Measurements have been made at the pore scale, in a two- dimensional network as represented by a fracture aperture, and in a porous medium. Significant enhancement of vapor-phase transport relative to Fickian diffusion was measured in all cases. The modeling and experimental results provide additional mechanisms for EVD beyond those presented by the generally accepted model of Philip and deVries (1957), which required a thermal gradient for EVD to exist. Modeling and experimental results show significant enhancement under isothermal conditions. Application of EVD to vapor transport in the near-surface vadose zone show a significant variation between no enhancement, the model of Philip and deVries, and the present results. Based on this information, the model of Philip and deVries may need to be modified, and additional studies are recommended.

This report documents a collection of papers on a family of uniform strain tetrahedral finite elements and their connection to different element types. Also included in the report are two papers which address the general problem of connecting dissimilar meshes in two and three dimensions. Much of the work presented here was motivated by the development of the tetrahedral element described in the report "A Suitable Low-Order, Eight-Node Tetrahedral Finite Element For Solids," by S. W. Key {ital et al.}, SAND98-0756, March 1998. Two basic issues addressed by the papers are: (1) the performance of alternative tetrahedral elements with uniform strain and enhanced uniform strain formulations, and (2) the proper connection of tetrahedral and other element types when two meshes are "tied" together to represent a single continuous domain.

Optical channeling or refractive guiding processes involving the nonlinear interaction of intense femtosecond optical pulses with matter in the self-focussing regime has created exciting opportunities for next-generation laser plasma-based x-ray sources and directed energy applications. This fundamentally new form of extended paraxial electromagnetic propagation in nonlinear dispersive media such as underdense plasma is attributed to the interplay between normal optical diffraction and intensity-dependent nonlinear focussing and refraction contributions in the dielectric response. Superposition of these mechanisms on the intrinsic index profile acts to confine the propagating energy in a dynamic self-guiding longitudinal waveguide structure which is stable for power transmission and robust compression. The laser-driven channels are hypothesized to support a degree of solitonic transport behavior, simultaneously stable in the space and time domains (group velocity dispersion balances self-phase modulation), and are believed to be self-compensating for diffraction and dispersion over many Rayleigh lengths in contrast with the defining characteristics of conventional diffractive imaging and beamforming. By combining concentrated power deposition with well-ordered spatial localization, this phenomena will also create new possibilities for production and regulation of physical interactions, including electron beams, enhanced material coupling, and self-modulated plasma wakefields, over extended gain distances with unprecedented energy densities. Harmonious combination of short-pulse x-ray production with plasma channeling resulting from a relativistic charge displacement nonlinearity mechanism in the terawatt regime (10{sup 18} W/cm{sup 2}) has been shown to generate high-field conditions conducive to efficient multi-kilovolt x-ray amplification and peak spectral brightness. Channeled optical propagation with intense short-pulse lasers is expected to impact several critical mission areas at Sandia including x-ray backlighting of pinch implosions, nondestructive radiographic imaging of aging weapons components, high-power electromagnetic pulse generation, particle acceleration, and remote sensing.

This effort studied the integration of innovative methods of key management crypto synchronization, and key agility while scaling encryption speed. Viability of these methods for encryption of ATM cell payloads at the SONET OC- 192 data rate (10 Gb/s), and for operation at OC-48 rates (2.5 Gb/s) was shown. An SNL-Developed pipelined DES design was adapted for the encryption of ATM cells. A proof-of-principle prototype circuit board containing 11 Electronically Programmable Logic Devices (each holding the equivalent of 100,000 gates) was designed, built, and used to prototype a high speed encryptor.

This study evaluated multiple, long-term environmental oil-contamination risk scenarios that could result from the potential leakage of UP to 1.5 million barrels of crude oil entombed in the Weeks Island SPR mine following site decommissioning and abandonment, and up to 100 years thereafter. This risk assessment also provides continuity with similar risk evaluations performed earlier and documented in the 1995 DOE Environmental Assessment for Decommissioning the Strategic Petroleum Reserve Weeks Island Facility (EA). This current study was requested by the DOE to help them determine if their previous Finding of No Significant Impact (FONSI), in the EA, is still valid or needs to be rescinded. Based on the calculated environmental risk results (in terms of clean-up and remediation expenses) presented in this risk assessment, including the calculated average likelihoods of oil release and potential oil-leakage volumes, none of the evaluated risk events would appear to satisfy the definition of significant environmental impact in National Environmental Policy Act (NEPA) terminology. The DOE may combine these current results with their earlier evaluations and interpretations in the 1995 EA in order to assess whether the existing FONSI is still accurate, acceptable, and valid. However, from a risk evaluation standpoint, the assessment of impacts appears to be the same whether only 10,000 to 30,000 barrels of crude oil (as considered in the 1995 EA), or up to 1.5 million barrels of oil (as considered herein) are abandoned in the Weeks Island SPR facility.

The theoretical background for the finite element computer program, MPSalsa Version 1.5, is presented in detail. MPSalsa is designed to solve laminar or turbulent low Mach number, two- or three-dimensional incompressible and variable density reacting fluid flows on massively parallel computers, using a Petrov-Galerkin finite element formulation. The code has the capability to solve coupled fluid flow (with auxiliary turbulence equations), heat transport, multicomponent species transport, and finite-rate chemical reactions, and to solve coupled multiple Poisson or advection-diffusion-reaction equations. The program employs the CHEMKIN library to provide a rigorous treatment of multicomponent ideal gas kinetics and transport. Chemical reactions occurring in the gas phase and on surfaces are treated by calls to CHEMKIN and SURFACE CHEMK3N, respectively. The code employs unstructured meshes, using the EXODUS II finite element database suite of programs for its input and output files. MPSalsa solves both transient and steady flows by using fully implicit time integration, an inexact Newton method and iterative solvers based on preconditioned Krylov methods as implemented in the Aztec. solver library.

The U.S. Department of Energy (DOE) has been developing a nuclear waste disposal facility, the Waste Isolation Pilot Plant (WIPP), located approximately 42 km east of Carlsbad, New Mexico. The WIPP is designed to demonstrate the safe disposal of transuranic wastes produced by the defense nuclear-weapons program. Performance assessment analyses (U.S. DOE, 1996) indicate that human intrusion by inadvertent and intermittent drilling for resources provide the only credible mechanisms for significant releases of radionuclides horn the disposal system. These releases may occur by five mechanisms: (1) cuttings, (2) cavings, (3) spallings, (4) direct brine releases, and (5) long-term brine releases. The first four mechanisms could result in immediate release of contaminant to the accessible environment. For the last mechanism, migration pathways through the permeable layers of rock above the Salado are important, and major emphasis is placed on the Culebra Member of the Rustler Formation because this is the most transmissive geologic layer in the disposal system. For reasons of initial quantity, half-life, and specific radioactivity, certain isotopes of Th, U, Am, and Pu would dominate calculated releases from the WIPP. In order to help quanti~ parameters for the calculated releases, radionuclide transport experiments have been carried out using five intact-core columns obtained from the Culebra dolomite member of the Rustler Formation within the Waste Isolation Pilot Plant (WIPP) site in southeastern New Mexico. This report deals primarily with results of mathematical analyses related to the retardation of %J%, 24%, and 24'Am in two of these cores (B-Core - VPX26-11A and C-Core - VPX28-6C). All B-Core transport experiments were done using Culebra-simukmt brine relevant to the core recovery location (the WIPP air-intake shaft - AIS). Most experiments with C-Core were done with AIS brine with some admixture of a brine composition (ERDA-6) that simulated deeper formation brines. No significant changes in transport behavior were observed for changes in brine. Hydraulic characteristics (i.e., apparent porosity and apparent dispersion coefficient) for the cores were obtained via experiments using conservative tracer `Na. Elution experiments carried out over periods of a few days with tracers `*U and %Np indicated that these tracers were weakly retarded as indicated by delayed elution of these species. Elution experiments with tracers `%, 24'Pu, and 24'Ani were performed, but no elution of any of these species was observed in any flow experiment to date, including experiments of up to two years duration. However, B-Core was subjected to tomographic analysis from which a retardation factor can be inferred for%. Moreover, the fact of non- elution for 24*Pu and 24'Am after more than two years brine flow through C-Core can be coupled with the minimum detectable activity for each of these species to compute minimum retardation factors in C-Core. The retardation factors for all three species can then be coupled with the apparent hydraulic characteristics to estimate an apparent minimum solutionhock distribution coefficient, &, for each actinide. The specific radionuclide isotopes used in these experiments were chosen to facilitate analysis. Even though these isotopes are not necessarily the same as those that are most important to WIPP performance, they are isotopes of the same elements, and . their chemical and transport properties are therefore identical to those of isotopes in the WIPP inventory. The retardation factors and & values deduced from experimental results strongly support the contention that sorption in the Culebra provides an effective barrier to release of Th, Pu, and Am during the regulatory period.

This paper presents the Local Area Network Distributed Supervisory Control and Programming Environment (LandScape) commands set that provides a Generic Device Subsystem Application Programmers Interface (API). These commands are implemented using the Common Object Request Broker Architecture (CORBA) specification with Orbix from Iona Technologies.

The purpose of this project was to create a reliable, 3D sensing and visualization system for unattended monitoring. The system provides benefits for several of Sandia's initiatives including nonproliferation, treaty verification, national security and critical infrastructure surety. The robust qualities of the system make it suitable for both interior and exterior monitoring applications. The 3D sensing system combines two existing sensor technologies in a new way to continuously maintain accurate 3D models of both static and dynamic components of monitored areas (e.g., portions of buildings, roads, and secured perimeters in addition to real-time estimates of the shape, location, and motion of humans and moving objects). A key strength of this system is the ability to monitor simultaneous activities on a continuous basis, such as several humans working independently within a controlled workspace, while also detecting unauthorized entry into the workspace. Data from the sensing system is used to identi~ activities or conditions that can signi~ potential surety (safety, security, and reliability) threats. The system could alert a security operator of potential threats or could be used to cue other detection, inspection or warning systems. An interactive, Web-based, 3D visualization capability was also developed using the Virtual Reality Modeling Language (VRML). The intex%ace allows remote, interactive inspection of a monitored area (via the Internet or Satellite Links) using a 3D computer model of the area that is rendered from actual sensor data.

This report provides an overview of the results of the Vital the Nicaraguan Water Resources Management Initiative, Issues process as implemented for a collaborative effort between the Nicaraguan Ministry of Environment and Natural Resources and Sandia National Laboratories. This initiative is being developed to assist in the development of an efficient and sustainable water resources management system for Nicamgua. The Vital Issues process was used to provide information for developing a project that will develop and implement an advanced information system for managing Nicaragua's water resources. Three Vital Issues panel meetings were convened to 1) develop a mission statement and evaluation criteria for identifying and ranking the issues vital to water resources management in Nicaragua 2) define and rank the vital issues; and 3) identify a preliminary list of information needed to address the vital issues. The selection of panelists from the four basic institutional perspectives- government, industiy, academe, and citizens' groups (through nongovernmental organizations (NGOs))-ensured a high level of stakeholder representation on the panels. The already existing need for a water resource management information system has been magnified in the aftemnath of Hurricane Mitch. This information system would be beneficial for an early warning system in emergencies, and the modeling and simulation capabilities of the system would allow for advanced planning. Additionally, the outreach program will provide education to help Nicaraguan improve their water hygiene practices.

Materials compatibility studies of aged, engineered materials and hardware are critical to understanding and predicting component reliability, particularly for systems with extended stockpile life requirements. Nondestructive testing capabilities for component reliability would significantly enhance lifetime predictions. For example, if the detection of crack propagation through a solder joint can be demonstrated, this technique could be used to develop baseline information to statistically determine solder joint lifelengths. This report will investigate high frequency signal response techniques for nondestructively evaluating the electrical behavior of thick film hybrid transmission lines.

Parameters have been identified that can be modeled stochastically using PORFLOW and Latin Hypercube Sampling (LHS). These parameters include hydrologic and transport properties in the vadose and saturated zones, as well as source-term parameters and infiltration rates. A number of resources were used to define the parameter distributions, primarily those provided in the Retrieval Performance Evaluation Report (Jacobs, 1998). A linear rank regression was performed on the vadose-zone hydrologic parameters given in Khaleel and Freeman (1995) to determine if correlations existed between pairs of parameters. No strong correlations were found among the vadose-zone hydrologic parameters, and it was recommended that these parameters be sampled independently until future data or analyses reveal a strong correlation or functional relationship between parameters. Other distributions for source-term parameters, infiltration rates, and saturated-zone parameters that are required to stochastically analyze the performance of the AX Tank Farm using LHS/PORFLOW were adapted from distributions and values reported in Jacobs (1998) and other literature sources. Discussions pertaining to the geologic conceptualization, vadose-zone modeling, and saturated-zone modeling of the AX Tank Farm are also presented.

Abstract not provided.

Abstract not provided.

In 1989 BNL was added to the EPAs National Priorities List. The site is divided into seven operable units (OU). OU-I includes the former landfill area. The field task site is noted as the AOC 2C Glass Holes location. Beginning in the 1960s and continuing into the 1980s, BNL disposed of laboratory waste (glassware, chemicals and animal carcasses) in numerous shallow pits. The drivers for remediating the pits are; historical records that indicate hazardous materials may have been disposed of in the pits; ground water contamination down gradient of the pits; a test excavation of one of the glass holes that unearthed laboratory glass bottles with unidentified liquids still contained; and the fact that BNL rests atop an EPA designated sole-source aquifer. The specific site chosen for this demonstration was pit G-11. The requirements that lead to choosing this pit were; a well characterized pit and a relatively isolated pit where our construction operations would not impact on adjacent pits. The glass holes area, including pit G-11, was comprehensively surveyed using a suite of geophysical techniques (e.g., EM-31, EM-61, GPR). Prior to stabilizing the waste form a subsurface barrier was constructed to contain the entire waste pit. The pit contents were then stabilized using a cement grout applied via jet grouting. The stabilization was performed to make removal of the waste from the pit easier and safer in terms of worker exposure. The grouting process would mix and masticate the waste and grout and form a single monolithic waste form. This large monolith would then be subdivided into smaller 4 foot by 4 foot by 10-12 foot block using a demolition grout. The smaller blocks would then be easily removed from the site and disposed of in a CERCLA waste site.

This is the final report of an LDRD program entitled 'Scanning Probe-Based Processes for Nanometer-Scale Device Fabrication'. This program intends to expand Sandia's expertise in scanning-probe based fabrication and characterization of nanostructures. Our object is to achieve an order of magnitude decrease in feature size compared to conventional fabrication technology. We are exploring approaches to nanostructure fabrication and characterization using scanning probe-based (STM, AFM). We also are developing numerical simulations of localized electric field and emission current to explore mechanisms and characterize limits to processing techniques. We emphasize novel fabrication processes and characterization of physical, chemical and electronic effects in nanostructures.

The process of manufacturing the MC4277 Neutron Tube requires the evacuation of the device through a 4.76 mm (.1875 in.) OD copper tube. Eight tubes are simultaneously evacuated and then baked out. When the process is completed, the tubes must be separated from the system without compromising the ultra-high vacuum in the tube and the system. Previously, a manual pinch-off tool was used. This procedure required up to 3 operators with a high probability of creating defective seals or destroyed tubes. Two new identical robotic systems were built to allow a single operator to consistently produce good tubes with perfect seals. These systems have the added capability of partially pinching off tubes at jaw displacements repeatable to *0.05 mm (kO.002 in.). Both systems have operated flawlessly since their installation in January and March, 1998. A detailed description of these systems is given in this report.

The elevation change data measured at the Weeks Island SPR site over the last 16+ years has been studied and analyzed. The subsidence rate is not constant with time and while the subsidence rate may have increased slightly during the past several years, recently the rate has increased more dramatically. The most recent increase comes at a time when the Strategic Petroleum Reserve (SPR) storage mine had been emptied of oil and was in the process of being refilled with brine. Damage to surface structures that has been observed during the past 12-18 months is attributed to the continued subsidence and dtierential subsidence across structures. The recent greater subsidence rates were unanticipated according to analysis results and will be used to aid further subsidence model development.

Hydrogen was ion-implanted into wurtzite-phase GaN, and its transport, bound states, and microstructural effects during annealing up to 980°C were investigated by nuclear-reaction profiling, ion-channeling analysis, transmission electron microscopy, and infrared (IR) vibrational spectroscopy. At implanted concentrations v1 at.%, faceted H2 bubbles formed, enabling identification of energetically preferred surfaces, examination of passivating N-H states on these surfaces, and determination of the diffusivity-solubility product of the H. Additionally, the formation and evolution of point and extended defects arising from implantation and bubble formation were characterized. At implanted H concentrations λ0.1 at.%, bubble formation was not observed, and ion-channeling analysis indicated a defect-related H site located within the [0001] channel.

GaN implanted with donor(Si, S, Se, Te) or acceptor (Be, Mg, C) species was annealed at 900-1500°C using AlN encapsulation. No redistribution was measured by SIMS for any of the dopants and effective diffusion coefficients are ≤2×10-13 cm2 · s-1 at 1400°C, except Be, which displays damage-enhanced diffusion at 900°C and is immobile once the point defect concentration is removed. Activation efficiency of ∼90% is obtained for Si at 1400°C. TEM of the implanted material shows a strong reduction in lattice disorder at 1400-1500°C compared to previous results at 1100°C. There is minimal interaction of the sputtered AlN with GaN under our conditions, and it is readily removed selectively with KOH.

The organization and assembly of molecules in cellular membranes is orchestrated through the recognition and binding of specific chemical signals. A simplified version of the cellular membrane system has been developed using a synthetically prepared membrane receptor incorporated into a biologically derived lipid bilayer. Through an interplay of electrostatic and van der Waals interactions, aggregation or dispersion of molecular components could be executed on command using a specific chemical signal. A pyrene fluorophore was used as an optical probe to monitor the aggregational state of the membrane receptors in the bilayer matrix. The pyrene excimer emission to monomer emission (E/M) intensity ratio gave a relative assessment of the local concentration of receptors in the membrane. Bilayers were prepared with receptors selective for the divalent metal ions of copper, mercury, and lead. Addition of the metal ions produced a rapid dispersion of aggregated receptor components at nano- to micro-molar concentrations. The process was reversible by sequestering the metal ions with EDTA. Receptors for proteins and polyhistidine were also prepared and incorporated into phosphatidylcholine lipid bilayers. In this case, the guest molecules bound to the membrane through multiple points of interaction causing aggregation of initially dispersed receptor molecules. The rapid, selective, and sensitive fluorescence optical response of these lipid assemblies make them attractive in sensor applications for aqueous phase metal ions and polypeptides.

The microstructural evolution of heavily deformed polycrystalline Cu is simulated by coupling a constitutive model for polycrystal plasticity with the Monte Carlo Potts model for grain growth. The effects of deformation on boundary topology and grain growth kinetics are presented. Heavy deformation leads to dramatic strain-induced boundary migration and subsequent grain fragmentation. Grain growth is accelerated in heavily deformed microstructures. The implications of these results for the thermomechanical fatigue failure of eutectic solder joints are discussed.

A GaN based depletion mode metal oxide semiconductor field effect transistor (MOSFET) was demonstrated using Ga2O3(Gd2O3) as the gate dielectric. The MOS gate reverse breakdown voltage was >35 V which was significantly improved from 17 V of Pt Schottky gate on the same material. A maximum extrinsic transconductance of 15 mS/mm was obtained at Vds = 30 V and device performance was limited by the contact resistance. A unity current gain cut-off frequency, fT, and maximum frequency of oscillation, fmax of 3.1 and 10.3 GHz, respectively, were measured at Vds = 25 V and Vgs = -20 V.

Microscopic calculations of the absorption and luminescence spectra are presented for wide bandgap Ga1-xInxN/GaN quantum well systems. Whereas structures with narrow well widths exhibit the usual excitation-dependent bleaching of the exciton resonance without shifting spectral position, a significant blueshift of the exciton peak is obtained for wider quantum wells. This blueshift, which is also present in the excitation-dependent luminescence spectra, is attributed to the interplay between the screening of a strain induced piezoelectric field and the density dependence of many-body Coulomb effects. The calculations also show an over two orders of magnitude increase in the spontaneous electron-hole-pair lifetime with well width, due to the reduction of the electron-hole wave function overlap in the wider wells. The resulting decrease in spontaneous emission loss is predicted to lead to improved threshold properties in wide quantum well lasers. © 1999 The American Physical Society.

Measurement and signal intelligence (MASINT) of the battlespace has created new requirements in information management, communication and interoperability as they effect surveillance and situational awareness. In many situations, stand-off remote-sensing and hazard-interdiction techniques over realistic operational areas are often impractical and difficult to characterize. An alternative approach is to implement adaptive remote-sensing techniques with swarms of mobile agents employing collective behavior for optimization of mapping signatures and positional orientation (registration). We have expanded intelligent control theory using physics-based collective behavior models and genetic algorithms to produce a uniquely powerful implementation of distributed ground-based measurement incorporating both local collective behavior, and inter-operative global optimization for sensor fusion and mission oversight. By using a layered hierarchical control architecture to orchestrate adaptive reconfiguration of semi-autonomous robotic agents, we can improve overall robustness and functionality in dynamic tactical environments without information bottlenecking. In our concept, each sensor is equipped with a miniaturized optical reflectance modulator which is interactively monitored as a remote transponder using a laser communication protocol from a remote mothership or operative. Robot data-sharing at the ground level can be leveraged with global evaluation criteria, including terrain overlays and remote imaging data. Information sharing and distributed intelligence opens up a new class of remote sensing applications in which small single-function autonomous observers at the local level can collectively optimize and measure large scale ground-level signatures. As the need for coverage and the number of agents grows to improve spatial resolution, cooperative behavior orchestrated by a global situational awareness umbrella will be an essential ingredient to offset increasing bandwidth requirements within the net. A system of this type is being developed which will be capable of sensitively detecting, tracking, and mapping spatial distributions of measurement signatures, which are nonstationary or obscured by clutter or interfering obstacles by virtue of adaptive reconfiguration. This methodology is being used to field an adaptive ground-penetrating impulse radar from a superposition of small radiating dipoles for detection of underground structures and to detect/remediate hazardous biological or chemical species in migrating plumes.

An expression for the coarsening rate of the Pb-rich phase particles was determined through isothermal aging experiments and comparative literature data as: λ = λo+{[4.10×10-5 e-11023/T+15.6×10-8 e-3123/T (dγ/dt)]t}0.256 where γo and γ are the initial and final mean Pb-rich particle diameters, respectively (mm); T is temperature (°K); t is time (s); and dγ/dt is the strain rate (s-1). The phase coarsening behavior showed good agreement with previous literature data from isothermal aging experiments. The power-law exponent, p, for the Pb-rich phase size coarsening kinetics: γp-γop≈t increased from a value of 3.3 at the low aging temperature regime (70-100 °C) to a value of 5.1 at the high temperature regime (135-170 °C), suggesting that the number of short-circuit diffusion paths had increased with further aging. This expression provides an important basis for the microstructurally-based, constitutive equation used in the visco-plastic model for TMF in Sn-Pb solder. The revised visco-plastic model was exercised using a through-hole solder joint configuration. Initial data indicate a satisfactory compatibility between the coarsening expression and the constitutive equations.

In-situ filling through hydrolysis and condensation of silicon alkoxides dissolved into polymers has been utilized to generate nanocomposites in which the filler phase can be intimately associated with the polymer on relatively small length scales. One problem of the method has been achieving useful fill volumes without bulk phase separation of the growing inorganic component from the polymer. In this paper, we describe the preparation of a new class of nanocomposite materials in which the inorganic filler phase is pre-assembled before copolymerization with an organic monomer. Maleimide monomers, prepared from alkoxysilylpropyl amines and maleic anhydride, were protected against side reactions by forming the oxonorbornene Diels-Alder adduct with furan. The monomers were then reacted under sol-gel conditions to form oligomers or polymers making up the filler phase. The material was activated by thermal deprotection of the maleimide and reacted with organic monomers or polymers to form the filled nanocomposite.

Progress towards the development of such algorithms as been reported for waveguide analysis'-3and vertical-cavity laser simulation. In all these cases, the higher accuracy order was obtained for a single spatial dimension. More recently, this concept was extended to differencing of the Helmholtz Equation on a 2-D grid, with uniform regions treated to 4th order and dielectric interfaces to 3'd order5. No attempt was made to treat corners properly. In this talk I will describe the extension of this concept to allow differencing of the Helmholtz Equation on a 2-D grid to 6* order in uniform regions and 5* order at dielectric interfaces. In addition, the first known derivation of a finite difference equation for a dielectric comer that allows correct satisfaction of all boundary conditions will be presented. This equation is only accurate to first order, but as will be shown, results in simulations that are third-order-accurate. In contrast to a previous approach3 that utilized a generalized Douglas scheme to increase the accuracy order of the difference second derivative, the present method invokes the Helmholtz Equation itself to convert derivatives of high order in a single direction into mixed

The computing power available to scientists and engineers has increased dramatically in the past decade, due in part to progress in making massively parallel computing practical and available. The expectation for these machines has been great. The reality is that progress has been slower than expected. Nevertheless, massively parallel computing is beginning to realize its potential for enabling significant breakthroughs in science and engineering. This paper provides a perspective on the state of the field, colored by the authors' experiences using large-scale parallel machines at Sandia National Laboratories. We address trends in hardware, system software and algorithms, and we also offer our view of the forces shaping the parallel computing industry.

To physically investigate permeability upscaling, over 13,000 permeability values were measured with four different sample supports (i.e., sample volumes) on a block of Berea Sandstone. At each sample support, spatially exhaustive permeability datasets were measured, subject to consistent flow geometry and boundary conditions, with a specially adapted minipermeameter test system. Here, we present and analyze a subset of the data consisting of 2304 permeability values collected from a single block face oriented normal to stratification. Results reveal a number of distinct and consistent trends (i.e., upscaling) relating changes in key summary statistics to an increasing sample support. Examples include the sample mean and semivariogram range that increase with increasing sample support and the sample variance that decreases. To help interpret the measured mean upscaling, we compared it to theoretical models that are only available for somewhat different flow geometries. The comparison suggests that the nonuniform flow imposed by the minipermeameter coupled with permeability anisotropy at the scale of the local support (i.e., smallest sample support for which data is available) are the primary controls on the measured upscaling. This work demonstrates, experimentally, that it is not always appropriate to treat the local-support permeability as an intrinsic feature of the porous medium, that is, independent of its conditions of measurement.

Isotopic labeling experiments have revealed correlations between hydrogen reactions, Ga desorption, and ammonia decomposition in GaN CVD. Low energy electron diffraction (LEED) and temperature programmed desorption (TPD) were used to demonstrate that hydrogen atoms are available on the surface for reaction after exposing GaN(001) to deuterium at elevated temperatures. Hydrogen reactions also lowered the temperature for Ga desorption significantly. Ammonia did not decompose on the surface before hydrogen exposure. However, after hydrogen reactions altered the surface, N15H3 did undergo both reversible and irreversible decomposition. This also resulted in the desorption of N2 of mixed isotopes below the onset of GaN sublimation. This suggests that the driving force of the high nitrogen-nitrogen bond strength (226 kcal/mol) can lead to the removal of nitrogen from the substrate when the surface is nitrogen rich. Overall, these findings indicate that hydrogen can influence GaN CVD significantly, being a common factor in the reactivity of the surface, the desorption of Ga, and the decomposition of ammonia.

Advanced rechargeable lithium-ion batteries are presently being developed and commercialized worldwide for use in consumer electronics, military and space applications. The motivation behind these efforts involves, among other things, a favorable combination of energy and power density. For some of the applications the power sources may need to perform at a reasonable rate at subambient temperatures. Given the nature of the lithium-ion cell chemistry the low temperature performance of the cells may not be very good. At Sandia National Laboratories, we have used different electrochemical techniques such as impedance and charge/discharge at ambient and subambient temperatures to probe the various electrochemical processes that are occurring in Li-ion cells. The purpose of this study is to identify the component that reduces the cell performance at subambient temperatures. We carried out 3-electrode impedance measurements on the cells which allowed us to measure the anode and cathode impedances separately. Our impedance data suggests that while the variation in the electrolyte resistance between room temperature and -20°C is negligible, the cathode electrolyte interfacial resistance increases substantially in the same temperature span. We believe that the slow interfacial charge transfer kinetics at the cathode electrolyte may be responsible for the increase in cell impedance and poor cell performance. © Copyright 1999 Society of Automotive Engineers, Inc.

Thermal batteries are normally constructed using pressed-powder anode, separator, and cathode pellets (discs). However, parts less than 0.010" thick are difficult to press from the starting powders. The use of plasma spraying to deposit thin pyrite films onto a stainless steel substrate was examined as an alternative to pressed-powder cathodes. The electrodes were tested under isothermal conditions and constant-current discharge over a temperature range of 400°C to 550°C using a standard LiSi anode and a separator based on the LiCIKCI eutectic. The plasma-sprayed cathodes were also evaluated in similar 5-cell thermal batteries. Cells and batteries using pressed-powder cathodes were tested under the same conditions for comparative purposes.

This paper addresses key issues for the cost-effective use of COTS (Commercially available Off The Shelf) microelectronics in radiation environments that enable circuit or system designers to manage risks and ensure mission success. We review several factors and tradeoffs affecting the successful application of COTS parts including (1) hardness assurance and qualification issues, (2) system hardening techniques, and (3) life-cycle costs. The paper also describes several experimental studies that address trends in total-dose, transient, and single-event radiation hardness as COTS technology scales to smaller feature sizes. As an example, the level at which dose-rate upset occurs in Samsung SRAMs increases from 1.4x10s rad(Si)/s for a 256K SRAM to 7.7xl09rad(Si)/s for a 4M SRAM, indicating unintentional hardening improvements in the design or process of a commercial technology. Additional experiments were performed to quantify variations in radiation hardness for COTS parts. In one study, only small (10-15%) variations were found in the dose-rate upset and latchup thresholds for Samsung 4M SRAMs from three different date codes. In another study, irradiations of 4M SRAMs from Samsung, Hitachi, and Toshiba indicate large differences in total-dose radiation hardness. The paper attempts to carefully define terms and clear up misunderstandings about the definitions of "COTS'1 and "radiation-hardened (RH)" technology. © 1999 IEEE.

The rutile TiO2(110) (1 × 1) surface is considered the prototypical 'well-defined' system in the surface science of metal oxides. Its popularity results partly from two experimental advantages: (i) bulk-reduced single crystals do not exhibit charging, and (ii) stoichiometric surfaces, as judged by electron spectroscopies, can be prepared reproducibly by sputtering and annealing in oxygen. We present results that show that this commonly applied preparation procedure may result in a surface structure that is by far more complex than generally anticipated. Flat, (1 × 1)-terminated surfaces are obtained by sputtering and annealing in ultrahigh vacuum. When re-annealed in oxygen at moderate temperatures (470-660 K), irregular networks of partially connected, pseudohexagonal rosettes (6.5 × 6 Å wide), one-unit cell wide strands, and small (≈tens of Å) (1 × 1) islands appear. This new surface phase is formed through reaction of oxygen gas with interstitial Ti from the reduced bulk. Because it consists of an incomplete, kinetically limited (1 × 1) layer, this phenomenon has been termed 'restructuring'. We report a combined experimental and theoretical study that systematically explores this restructuring process. The influence of several parameters (annealing time, temperature, pressure, sample history, gas) on the surface morphology is investigated using STM. The surface coverage of the added phase as well as the kinetics of the restructuring process are quantified by LEIS and SSIMS measurements in combination with annealing in 18O-enriched gas. Atomic models of the essential structural elements are presented and are shown to be stable with first-principles density functional calculations. The effect of oxygen-induced restructuring on surface chemistry and its importance for TiO2 and other bulk-reduced oxide materials is briefly discussed.

We describe the microfabrication of an extremely compact optical system as a key element in an integrated capillary channel electrochromatograph with fluorescence detection. The optical system consists of a vertical cavity surface-emitting laser (VCSEL), two high performance microlenses, and a commercial photodetector. The microlenses are multilevel diffractive optics patterned by electron beam lithography and etched by reactive ion etching in fused silica. The design uses substrate-mode propagation within the fused silica substrate. Two generations of optical subsystems are described. The first generation design has a 6 mm optical length and is integrated directly onto the capillary channel-containing substrate. The second generation design separates the optical system onto its own substrate module and the optical path length is further compressed to 3.5 mm. The first generation design has been tested using direct fluorescence detection with a 750 nm VCSEL pumping a 10-4 M solution of CY-7 dye. The observed signal-to-noise ratio of better than 100:1 demonstrates that the background signal from scattered pump light is low despite the compact size of the optical system and is adequate for system sensitivity requirements. © 1999 American Vacuum Society.

A computational procedure for extracting substructure-by-substructure flexibility properties from global modal parameters is presented. The present procedure consists of two key features: an element-based direct flexibility method, which uniquely determines the global flexibility without resorting to case-dependent redundancy selections, and the projection of kinematically inadmissible modes that are contained in the iterated substructural matrices. The direct flexibility method is used as the basis of an inverse problem, whose goal is to determine substructural flexibilities given the global flexibility, geometrically determined substructural rigid-body modes, and the local-to-global assembly operators. The resulting procedure, given accurate global flexibility, extracts the exact element-by-element substructural flexibilities for determinate structures. For indeterminate structures, the accuracy depends on the iteration tolerance limits. The procedure is illustrated using both simple and complex numerical examples and appears to be effective for structural applications such as damage localization and finite element model reconciliation.

Evidence for capillary waves at a liquid-vapor interface are presented from extensive molecular dynamics simulations of a system containing up to 1.24 million Lennard-Jones particles. Careful measurements show that the total interfacial width depends logarithmically on L∥, the length of the simulation cell parallel to the interface, as predicted theoretically. The strength of the divergence of the interfacial width on L∥ depends inversely on the surface tension γ. This allows us to measure γ two ways since γ can also be obtained from the difference in the pressure parallel and perpendicular to the interface. These two independent measures of γ agree provided that the interfacial order parameter profile is fit to an error function and not a hyperbolic tangent, as often assumed. We explore why these two common fitting functions give different results for γ.

Previous photopumping studies of coupled vertical cavity laser structures have demonstrated three mode coupling (two photonic and one excitonic), dual wavelength emission, and short pulse generation. This paper reports on electrically injected coupled resonator vertical-cavity laser diodes, including two novel modulation approaches.

Consider the 2-matching problem defined on the complete graph, with edge costs which satisfy the triangle inequality. We prove that the value of a minimum cost 2-matching is bounded above by 4/3 times the value of its linear programming relaxation, the fractional 2-matching problem. This lends credibility to a long-standing conjecture that the optimal value for the traveling salesman problem is bounded above by 4/3 times the value of its linear programming relaxation, the subtour elimination problem. © Springer-Verlag 1999.

Diamond films were grown by chemical deposition of hydrocarbon species in a vapor composed predominantly of hydrogen. The rate constants of the surface reactions and the concentrations of the gas-phase species were used as input to a variable time step Monte Carlo algorithm, which simulates the evolution of the diamond growth surface by tracking the occupancies of surface sites. The results of the combined tight binding and density functional theory quantum mechanical calculations are presented, suggesting that the etching of isolated, monomolecular moieties occurred at an appreciable rate, while etching from larger carbon islands was nor favorable.

We study the low-temperature in-plane magnetoresistance of tunnel-coupled quasi-one-dimensional quantum wires. The wires are defined by two pairs of mutually aligned split gates on opposite sides of a ⩽1-μm-thick (Formula presented) double-quantum-well heterostructure, allowing independent control of the width of each quantum well. In the ballistic regime, when both wires are defined and the field is perpendicular to the current, a large resistance peak at ∼6 T is observed with a strong gate voltage dependence. The data are consistent with a counting model whereby the number of subbands crossing the Fermi level changes with field due to the formation of an anticrossing in each pair of one-dimensional subbands. © 1999 The American Physical Society.

We describe a very-low power consumption circuit for processing the pulses from a semiconductor radiation detector. The circuit was designed for use with a cadmium zinc telluride (CZT) detector for unattended monitoring of stored nuclear materials. The device is intended to be battery powered and operate at low duty-cycles over a long period of time. This system will provide adequate performance for medium resolution gamma-ray pulse-height spectroscopy applications. The circuit incorporates the functions of a charge sensitive preamplifier, shaping amplifier, and peak sample and hold circuit. An application specific integrated circuit (ASIC) version of the design has been designed, built and tested. With the exception of the input field effect transistor (FET), the circuit is constructed using bipolar components. In this paper the design philosophy and measured performance characteristics of the circuit are described.

We report the stability of TlBa2CaCu2O7 and Tl2Ba2CaCu2O8 on LaAlO3(100) epitaxial thin films, under a variety of conditions. All films are stable in acetone and methanol and with repeated thermal cycling to cryogenic temperatures. Moisture, especially vapor, degrades film quality rapidly. These materials are stable to high temperatures in either N2 or O2 ambients. While total degradation, resulting from Tl depletion, occurs at the same temperatures for both phases, 600 °C in N2 and 700 °C in O2, the onset of degradation occurs at somewhat lower temperatures for TlBa2CaCu2O7 than for Tl2Ba2CaCu2O8.