Prior to implosion in Magnetized Liner Inertial Fusion (MagLIF), the fuel is heated to temperatures on the order of several hundred eV with a multi-kJ, multi-ns laser pulse. We present two laser heated plasma experiments, relevant to the MagLIF preheat stage, performed at Z with beryllium liners filled with deuterium and a trace amount of argon. In one experiment, there is no magnetic field and, in the other, the liner and fuel are magnetized with an 8.5 T axial magnetic field. The recorded time integrated, spatially resolved spectra of the Ar K-shell emission are sensitive to electron temperature Te. Individual analysis of the spatially resolved spectra produces electron temperature distributions Te(z) that are resolved along the axis of laser propagation. In the experiment with magnetic field, the plasma reaches higher temperatures and the heated region extends deeper within the liner than in the unmagnetized case. Radiation magnetohydrodynamics simulations of the experiments are presented and post-processed. A comparison of the results from experimental and simulated data reveals that the simulations underpredict Te in both cases but the differences are larger in the case with magnetic field.
We report on the experimental observation of a decreased self-injection threshold by using laser pulses with circular polarization in laser wakefield acceleration experiments in a nonpreformed plasma, compared to the usually employed linear polarization. A significantly higher electron beam charge was also observed for circular polarization compared to linear polarization over a wide range of parameters. Theoretical analysis and quasi-3D particle-in-cell simulations reveal that the self-injection and hence the laser wakefield acceleration is polarization dependent and indicate a different injection mechanism for circularly polarized laser pulses, originating from larger momentum gain by electrons during above threshold ionization. This enables electrons to meet the trapping condition more easily, and the resulting higher plasma temperature was confirmed via spectroscopy of the XUV plasma emission.
Accurate calculation of spectral line broadening is important for many hot, dense plasma applications. However, calculated line widths have significantly underestimated measured widths for Δn=0 lines of Li-like ions, which is known as the isolated-line problem. In this Letter, scrutinization of the line-width derivation reveals that the commonly used expression neglects a potentially important contribution from electron-capture. Line-width calculations including this process are performed with two independent codes, both of which removed the discrepancies at temperatures below 10 eV. The revised calculations also suggest the remaining discrepancy scales more strongly with electron temperature than the atomic number as was previously suggested.
We report measurements of K-shell fluorescence lines induced by fast electrons in ramp-compressed Co targets. The fluorescence emission was stimulated by fast electrons generated through short-pulse laser-solid interaction with an Al target layer. Compression up to 2.1× solid density was achieved while maintaining temperatures well below the Fermi energy, effectively removing the thermal effects from consideration. We observed small but unambiguous redshifts in the Kβ fluorescence line relative to unshifted Cu Kα. Redshifts up to 2.6 eV were found to increase with compression and to be consistent with predictions from self-consistent models based on density-functional theory.
We report on the characterization of the conditions of an imploding cylindrical plasma by time-resolved x-ray emission spectroscopy. Knowledge about this implosion platform can be applied to studies of particle transport for inertial confinement fusion schemes or to astrophysical plasmas. A cylindrical Cl-doped CH foam within a tube of solid CH was irradiated by 36 beams (Itotal ∼5 × 1014 W/cm2, 1.5 ns square pulse, and Etotal ∼16.2 kJ) of the OMEGA-60 laser to radially compress the CH toward the axis. The analysis of the time-resolved spectra showed that the compression can be described by four distinct phases, each presenting different plasma conditions. First the ablation of the cylinder is dominant; second, the foam is heated and induces a significant jump in emission intensities; third, the temperature and density of the foam reaches a maximum; and finally, the plasma expands. Ranges for the plasma temperature were inferred with the atomic physics code SCRAM (Spectroscopic Collisional-Radiative Atomic Model) and the experimental data have been compared to hydrodynamic simulations performed with the 2D code FLASH, which showed a similar implosion dynamic over time.
Recent opacity measurements have inspired a close study of the two-photon contributions to the opacity of hot plasmas. The absorption and emission of radiation is controlled by dipole matrix-elements of electrons in an atom or ion. This paper describes two independent methods to calculate matrix-elements needed for the two-photon opacity and tests the results by the f-sum rule. The usual f-sum rule is extended to a matrix f-sum that offers a rigorous test for bound-bound, bound-free and free-free transitions. An additional higher-order sum-rule for the two-photon transition amplitudes is described. In this work, we obtain a simple parametric representation of a key plasma density effect on the matrix-elements. The perturbation theory calculation of two-photon cross-sections is compared to an independent method based on the solution of the time-dependent Schroedinger equation for an atom or ion in a high-frequency electromagnetic field. This is described as a high frequency Stark effect or AC Stark effect. Two-photon cross sections calculated with the AC Stark code agree with perturbation theory to within about 5%. In addition to this cross check, the AC Stark code is well suited to evaluating important questions such as the variation of two-photon opacity for different elements.
Hansen, Stephanie B.; Chung, H.K.; Fontes, Christopher J.; Ralchenko, Yu; Scott, H.A.; Stambulchik, E.
This work reports on the results of the 10th Non-LTE code comparison workshop, which was held at the University of San Diego campus November 28 through December 1, 2017. Non-equilibrium collisional-radiative models predict the electronic state populations and attendant emission and absorption characteristics of hot, dense matter and are used to help design and diagnose high-energy-density experiments. At this workshop, fifteen codes from eleven institutions contributed results for steady-state and time-dependent neon, aluminum, silicon, and chlorine cases relevant to a variety of high-density experimental and radiation-driven astrophysical systems. We focus on differences in the predictions from codes with different internal structure, completeness, density effects, and rate fidelity and the impact of those differences on hot, dense plasma diagnostics.
A multi-frame shadowgraphy diagnostic has been developed and applied to laser preheat experiments relevant to the Magnetized Liner Inertial Fusion (MagLIF) concept. The diagnostic views the plasma created by laser preheat in MagLIF-relevant gas cells immediately after the laser deposits energy as well as the resulting blast wave evolution later in time. The expansion of the blast wave is modeled with 1D radiation-hydrodynamic simulations that relate the boundary of the blast wave at a given time to the energy deposited into the fuel. This technique is applied to four different preheat protocols that have been used in integrated MagLIF experiments to infer the amount of energy deposited by the laser into the fuel. The results of the integrated MagLIF experiments are compared with those of two-dimensional LASNEX simulations. The best performing shots returned neutron yields ∼40-55% of the simulated predictions for three different preheat protocols.