Publications

Abstract not provided.

Abstract not provided.

This work reports an on-wafer study of avalanche behavior and failure analysis of in-house fabricated 1.3 kV GaN-on-GaN P-N diodes. DC breakdown is measured at different temperatures to confirm avalanche behavior. Diode's avalanche ruggedness is measured directly on-wafer using a modified unclamped inductive switching (UIS) test set-up with an integrated thermal chuck and high-speed CCD for real-time imaging during the test. The avalanche ruggedness of the GaN P-N diode is evaluated and compared with a commercial SiC Schottky diode of similar voltage and current rating. Failure analysis is done using SEM and optical microscopy to gain insight into the diode's failure mechanism during avalanche operation.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

The Port of Alaska in Anchorage enables the economic vitality of the Municipality of Anchorage and State of Alaska. It also provides significant support to defense activities across Alaska, especially to the Joint Base Elmendorf-Richardson (JBER) that is immediately adjacent to the Port. For this reason, stakeholders are interested in the resilience of the Ports operations. This report documents a preliminary feasibility analysis for developing an energy system that increases electric supply resilience for the Port and for a specific location inside JBER. The project concept emerged from prior work led by the Municipality of Anchorage and consultation with Port stakeholders. The project consists of a microgrid with PV, storage and diesel generation, capable of supplying electricity to loads at the Port a specific JBER location during utility outages, while also delivering economic value during blue-sky conditions. The study aims to estimate the size, configuration and concept of operations based on existing infrastructure and limited demand data. It also explores potential project benefits and challenges. The report goal is to inform further stakeholder consultation and next steps.

Optimized designs were achieved using a genetic algorithm to evaluate multi-objective trade space, including Mean-Time-Between-Failure (MTBF) and volumetric power density. This work provides a foundational platform that can be used to optimize additional power converters, such as an inverter for the EV traction drive system as well as trade-offs in thermal management due to the use of different device substrate materials.

Abstract not provided.

With inverter-based distributed energy resources (DERs) becoming more prevalent in grid-connected or islanded distribution feeders, a better understanding of the performance of these devices is needed. Increasing the amount of inverter-based generation, and therefore reducing conventional generation, i.e. rotating machines and synchronous generators, decreases generation sources with well-known characteristic responses for unbalanced and transient fault conditions. This paper experimentally tests the performance of commercial grid-forming inverters under fault and unbalanced conditions and provides a comparison between grid-forming inverters and their grid-following counterparts.

In power electronic applications, reliability and power density are a few of the many important performance metrics that require continual improvement in order to meet the demand of today's complex electrical systems. However, due to the complexity of the synergy between various components, it is challenging to visualize and evaluate the effects of choosing one component over another and what certain design parameters impose on the overall reliability and lifetime of the system. Furthermore, many areas of electronics have realized remarkable innovation in the integration of new materials of passive and active components; wide-bandgap semiconductor devices and new magnetic materials allow higher operating temperature, blocking voltage, and switching frequency; all of which enable much more compact power converter designs. However, uncertainty remains in the overall electronics reliability in different design variations. Hence, in order to better understand the relationship between reliability and power density in a power electronic system, this paper utilizes a genetic algorithm (GA) to provide pareto optimal solution sets in a multi-variate trade space that relates the Mean Time Between Failures (MTBF) and volumetric power density for the design of a 5 kW synchronous boost converter. Different designs of the synchronous boost converter based on the variation of the electrical parameters and material types for the passive (input and output capacitors, the boost inductor, and the heatsink) and active components (switches) have been studied. A few candidate designs have been evaluated and verified through hardware experiments.

Sandia National Laboratories sponsored a three-year internally funded Laboratory Directed Research and Development (LDRD) effort to investigate the vulnerabilities and mitigations of a high-altitude electromagnetic pulse (HEMP) on the electric power grid. The research was focused on understanding the vulnerabilities and potential mitigations for components and systems at the high voltage transmission level. Results from the research included a broad array of subtopics, covered in twenty-three reports and papers, and which are highlighted in this executive summary report. These subtopics include high altitude electromagnetic pulse (HEMP) characterization, HEMP coupling analysis, system-wide effects, and mitigating technologies.

This report describes broadband measurements of transmission-scale transformers typical in the electric power grid. This work was performed as part of the EMP Resilient Grid LDRD project at Sandia National Laboratories to generate circuit models that can be used for high-altitude electromagnetic pulse (HEMP) coupling simulations and response predictions. The objective of the work was to obtain characterization data of substation yard equipment across a frequency range relevant to HEMP. Vector network analyzer measurements up to 100 MHz were performed on two power transformers at ABB-Hitachi and a single ITEC potential transformer. Custom cable breakouts were designed to interface with the transformer terminals and provide ground connections to the chassis at the base of the transformer bushings. The three-phase terminals of the power transformers were measured as a common mode impedance using a parallel resistive splitter, and the single-phase terminals of the potential transformer were measured directly. A vector fitting algorithm was used to empirically fit circuit models to the resulting two-port networks and input impedances of the measured objects. Simplified circuit representations of the input impedances were also generated to assess the degree of precision needed for high-altitude electromagnetic pulse response predictions, which were performed in Sandia's XYCE circuit simulator platform. HEMP coupling simulations using the transformer models showed significant reduction in the voltage peak and broadening in the pulse width seen at the power transformer compared to the traveling wave voltage. This indicated the importance of the load condition when defining the coupled insult in an electric power substation. Simplified circuit models showed a similar voltage at the transformer with a smoothed waveform. The presence of potential transformers in the simulation did not significantly change the simulated voltage at the power transformer. Single-port input impedance models were also developed to define load conditions when transfer characteristics were not necessary.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

During the last decade, utility companies around the world have experienced a significant increase in the occurrences of either planned or unplanned blackouts, and microgrids have emerged as a viable solution to improve grid resiliency and robustness. Recently, power converters with grid-forming capabilities have attracted interest from researchers and utilities as keystone devices enabling modern microgrid architectures. Therefore, proper and thorough testing of Grid-Forming Inverters (GFMIs) is crucial to understand their dynamics and limitations before they are deployed. The use of closed-loop real-time Power Hardware-in-the-Loop (PHIL) simulations will facilitate the testing of GFMIs using a digital twin of the power system under various contingency scenarios within a controlled environment. So far, lower to medium scale commercially available GFMIs are difficult to interface into PHIL simulations because of their lack of a synchronization mechanism that allows a smooth and stable interconnection with a voltage source such as a power amplifier. Under this scenario, the use of the well-known Ideal Transformer Method to create a PHIL setup can lead to catastrophic damages of the GFMI. This paper addresses a simple but novel method to interface commercially available GFMIs into a PHIL testbed. Experimental results showed that the proposed method is stable and accurate under standalone operation with abrupt (step) load-changing dynamics, followed by the corresponding steady state behavior. Such results were validated against the dynamics of the GFMI connected to a linear load bank.

During the last decade, utility companies around the world have experienced a significant increase in the occurrences of either planned or unplanned blackouts, and microgrids have emerged as a viable solution to improve grid resiliency and robustness. Recently, power converters with grid-forming capabilities have attracted interest from researchers and utilities as keystone devices enabling modern microgrid architectures. Therefore, proper and thorough testing of Grid-Forming Inverters (GFMIs) is crucial to understand their dynamics and limitations before they are deployed. The use of closed-loop real-time Power Hardware-in-the-Loop (PHIL) simulations will facilitate the testing of GFMIs using a digital twin of the power system under various contingency scenarios within a controlled environment. So far, lower to medium scale commercially available GFMIs are difficult to interface into PHIL simulations because of their lack of a synchronization mechanism that allows a smooth and stable interconnection with a voltage source such as a power amplifier. Under this scenario, the use of the well-known Ideal Transformer Method to create a PHIL setup can lead to catastrophic damages of the GFMI. This paper addresses a simple but novel method to interface commercially available GFMIs into a PHIL testbed. Experimental results showed that the proposed method is stable and accurate under standalone operation with abrupt (step) load-changing dynamics, followed by the corresponding steady state behavior. Such results were validated against the dynamics of the GFMI connected to a linear load bank.

This paper describes the design of a very high power density inverter drive module using aggressive high-frequency design methods and multi-objective optimization tools. This work is part of a larger effort to develop electric drive designs with >97% efficiency, power densities of 100 kW/L for the power electronics, and with predicted reliable operation to 300, 000 miles. The approach taken in this work is to develop designs that utilize wide band gap devices (SiC or GaN) and ceramic capacitors to enable high-frequency switching and a compact integrated design. The multi-objective optimization is employed to select key parameters for the design.

The Port of Alaska in Anchorage enables the economic vitality of the Municipality of Anchorage and State of Alaska. It also provides significant support to defense activities across Alaska, especially to the Joint Base Elmendorf-Richardson (JBER) that is immediately adjacent to the Port. For this reason, stakeholders are interested in the resilience of the Ports operations. This report documents a preliminary feasibility analysis for developing an energy system that increases electric supply resilience for the Port and for a specific location inside JBER. The project concept emerged from prior work led by the Municipality of Anchorage and consultation with Port stakeholders. The project consists of a microgrid with PV, storage and diesel generation, capable of supplying electricity to loads at the Port a specific JBER location during utility outages, while also delivering economic value during blue-sky conditions. The study aims to estimate the size, configuration and concept of operations based on existing infrastructure and limited demand data. It also explores potential project benefits and challenges. The report goal is to inform further stakeholder consultation and next steps.

Abstract not provided.

Abstract not provided.

This report details the test setup, process, and results for radiated susceptibility testing of multicrystalline silicon photovoltaic (PV) modules as part of the EMP-Resilient Electric Grid Grand Challenge Laboratory Directed Research and Development (LDRD) project at Sandia National Laboratories. Testing was conducted over October 10-17, 2019, where 8 photovoltaic modules were exposed to E1 transient pulses with peak field levels up to 100 kV/m. Modules were terminated in a resistive load representing connected components. State of health testing conducted via I-V curve tracing of the photovoltaic modules showed no observable loss of device function due to large electric field transients. Differential mode currents were measured on the order of 10's of amps for up to a microsecond following the radiated field pulse. Common mode currents took the form of a damped sinusoid with a maximum peak of 10's to 100's of amps with a resonance near 60 MHz.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Inverters using phase-locked loops for control depend on voltages generated by synchronous machines to operate. This might be problematic if much of the conventional generation fleet is displaced by inverters. To solve this problem, grid-forming control for inverters has been proposed as being capable of autonomously regulating grid voltages and frequency. Presently, the performance of bulk power systems with massive penetration of grid-forming inverters has not been thoroughly studied as to elucidate benefits. Hence, this paper presents inverter models with two grid-forming strategies: virtual oscillator control and droop control. The two models are specifically developed to be used in positive-sequence simulation packages and have been implemented in PSLF. The implementations are used to study the performance of bulk power grids incorporating inverters with gridforming capability. Specifically, simulations are conducted on a modified IEEE 39-bus test system and the microWECC test system with varying levels of synchronous and inverter-based generation. The dynamic performance of the tested systems with gridforming inverters during contingency events is better than cases with only synchronous generation.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Historically, photovoltaic inverters have been grid-following controlled, but with increasing penetrations of inverter-based generation on the grid, grid-forming inverters (GFMI) are gaining interest. GFMIs can also be used in microgrids that require the ability to interact and operate with the grid (grid-tied), or to operate autonomously (islanded) while supplying their corresponding loads. This approach can substantially improve the response of the grid to severe contingencies such as hurricanes, or to high load demands. During islanded conditions, GFMIs play an important role on dictating the system's voltage and frequency the same way as synchronous generators do in large interconnected systems. For this reason, it is important to understand the behavior of such grid-forming inverters under fault scenarios. This paper focuses on testing different commercially available grid-forming inverters under fault conditions.

Abstract not provided.

Modern power grids include a variety of renewable Distributed Energy Resources (DERs) as a strategy to comply with new environmental and renewable portfolio standards (RPSs) imposed by state and federal agencies. Typically, DERs include the use of power electronic (PE) interfaces to interactwith the power grid. Recently this interaction has not only been focused on supplying maximum available energy, but also on supporting the power grid under abnormal conditions such as low voltage/frequency conditions or non-unity power factor. Over the last few years, grid-following inverters (GFLIs) have proven their value while providing these ancillary grid-support services either at residential or utility scale. However, the use of grid-forming inverters (GFMIs) is gaining momentum as the penetration-level of DERs increases and system inertia decreases. Under abnormal operating conditions, GFMIs tend to better preserve grid stability due to their intrinsic ability to balance loadswithout the aid of coordination controls. In order to gain and propose fundamental insights into the interfacing of GFMIs to real time simulation, this paper analyzes the dynamics of two different GFMI simulation models in terms of stability and load changes using a Power Hardware-in-the-Loop (PHIL) simulation testbed.

Historically, photovoltaic inverters have been grid-following controlled, but with increasing penetrations of inverter-based generation on the grid, grid-forming inverters (GFMI) are gaining interest. GFMIs can also be used in microgrids that require the ability to interact and operate with the grid (grid-tied), or to operate autonomously (islanded) while supplying their corresponding loads. This approach can substantially improve the response of the grid to severe contingencies such as hurricanes, or to high load demands. During islanded conditions, GFMIs play an important role on dictating the system's voltage and frequency the same way as synchronous generators do in large interconnected systems. For this reason, it is important to understand the behavior of such grid-forming inverters under fault scenarios. This paper focuses on testing different commercially available grid-forming inverters under fault conditions.

Abstract not provided.

The purpose of the International Technology Roadmap for Wide-Bandgap Power Semiconductors (ITRW) Materials and Devices Working Group, which considers the materials science of Wide-and Ultra-Wide-Band-Gap (WBG and UWBG) semiconductors, in addition to device design, fabrication, and evaluation, is to formulate a long-term, international roadmap for WBG and UWBG materials and devices, consistent with the packaging and applications working groups of ITRW. The working group is co-chaired by Victor Veliadis (primarily representing silicon carbide (SiC) and related materials) and Robert Kaplar (primarily representing gallium nitride (GaN) and related materials, as well as emerging ultra-WBGs) and is split into four sub-working-groups, which are: 1) SiC materials and devices (co-chairs Jon Zhang and Mietek Bakowski). 2) Lateral GaN materials and devices (co-chairs Sameh Khalil and Peter Moens). 3) Vertical GaN materials and devices (co-chairs TBD). 4) Emerging UWBG materials and devices (co-chairs Mark Hollis). The first two subgroups represent technology that is far more mature than that of the latter two, and devices are available as commercial products in power applications. The primary focus of this article will be on developments in subgroups 1 and 2, with only brief descriptions of the latter two sub-groups, including future activities as they mature technologically.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.