Publications

Results 76401–76500 of 99,299

Search results

Jump to search filters

Problems encountered in fluctuating flame temperature measurements by thermocouple

Proposed for publication in Sensors.

Gill, Walter; Donaldson, Burl

Some thermocouple experiments were carried out in order to obtain sensitivity of thermocouple readings to fluctuations in flames and to determine if the average thermocouple reading was representative of the local volume temperature for fluctuating flames. The thermocouples considered were an exposed junction thermocouple and a fully sheathed thermocouple with comparable time constants. Either the voltage signal or indicated temperature for each test was recorded at sampling rates between 300-4,096 Hz. The trace was then plotted with respect to time or sample number so that time variation in voltage or temperature could be visualized and the average indicated temperature could be determined. For experiments where high sampling rates were used, the signal was analyzed using Fast Fourier Transforms (FFT) to determine the frequencies present in the thermocouple signal. This provided a basic observable as to whether or not the probe was able to follow flame oscillations. To enhance oscillations, for some experiments, the flame was forced. An analysis based on thermocouple time constant, coupled with the transfer function for a sinusoidal input was tested against the experimental results.

More Details
TYPE Journal Article YEAR 2008
OSTI

Molecular models and simulations of layered materials

Proposed for publication in the Journal of Materials Chemistry.

Greathouse, Jeffery A.; Cygan, Randall T.

The micro- to nano-sized nature of layered materials, particularly characteristic of naturally occurring clay minerals, limits our ability to fully interrogate their atomic dispositions and crystal structures. The low symmetry, multicomponent compositions, defects, and disorder phenomena of clays and related phases necessitate the use of molecular models and modern simulation methods. Computational chemistry tools based on classical force fields and quantum-chemical methods of electronic structure calculations provide a practical approach to evaluate structure and dynamics of the materials on an atomic scale. Combined with classical energy minimization, molecular dynamics, and Monte Carlo techniques, quantum methods provide accurate models of layered materials such as clay minerals, layered double hydroxides, and clay-polymer nanocomposites.

More Details
TYPE Journal Article YEAR 2008
OSTI

Safety analysis of high pressure 3He-filled micro-channels for thermal neutron detection

Renzi, Ronald F.; Ferko, Scott M.; Galambos, Paul C.; Derzon, Mark S.

This document is a safety analysis of a novel neutron detection technology developed by Sandia National Laboratories. This technology is comprised of devices with tiny channels containing high pressure {sup 3}He. These devices are further integrated into large scale neutron sensors. Modeling and preliminary device testing indicates that the time required to detect the presence of special nuclear materials may be reduced under optimal conditions by several orders of magnitude using this approach. Also, these devices make efficient use of our {sup 3}He supply by making individual devices more efficient and/or extending the our limited {sup 3}He supply. The safety of these high pressure devices has been a primary concern. We address these safety concerns for a flat panel configuration intended for thermal neutron detection. Ballistic impact tests using 3 g projectiles were performed on devices made from FR4, Silicon, and Parmax materials. In addition to impact testing, operational limits were determined by pressurizing the devices either to failure or until they unacceptably leaked. We found that (1) sympathetic or parasitic failure does not occur in pressurized FR4 devices (2) the Si devices exhibited benign brittle failure (sympathetic failure under pressure was not tested) and (3) the Parmax devices failed unacceptably. FR4 devices were filled to pressures up to 4000 + 100 psig, and the impacts were captured using a high speed camera. The brittle Si devices shattered, but were completely contained when wrapped in thin tape, while the ductile FR4 devices deformed only. Even at 4000 psi the energy density of the compressed gas appears to be insignificant compared to the impact caused by the incoming projectile. In conclusion, the current FR4 device design pressurized up to 4000 psi does not show evidence of sympathetic failure, and these devices are intrinsically safe.

More Details
TYPE SAND Report YEAR 2008
DOIOSTI

Radioluminescence and scintillation results of horizontal gradient freeze grown aliovalently-doped CeBr3

Proposed for publication in IEEE Transactions on Nuclear Science.

Doty, F.P.

Strengthening the crystal lattice of lanthanide halides, which are brittle, anisotropic, ionic crystals, may prove to increase the availability and ruggedness of these scintillators for room-temperature gamma-ray spectroscopy applications. Eight aliovalent dopants for CeBr{sub 3} were explored in an effort to find the optimal aliovalent strengthening agent. Eight dopants, CaBr{sub 2}, SrBr{sub 2}, BaBr{sub 2}, ZrBr{sub 4}, HfBr{sub 4}, ZnBr{sub 2}, CdBr[sub 2}, and PbBr{sub 2}, were explored at two levels of doping, 500 and 1000 ppm. From each ingot, samples were harvested for radioluminescence spectrum measurement and scintillation testing. Of the eight dopants explored, only BaBr{sub 2} and PbBr{sub 2} were found to clearly decrease total light yield. ZnBr{sub 2} and CdBr{sub 2} dopants both affected the radioluminescence emission spectrum very little as compared to undoped CeBr{sub 3}. HfBr{sub 2}- and ZnBr{sub 4}-doped CeBr{sub 3} exhibited the highest light yields.

More Details
TYPE Journal Article YEAR 2008
OSTI

Treatment of acoustic fluid-structure interaction by Localized Lagrange Multipliers and comparison to alternative interface coupling methods

Computer Methods in Applied Mechanics and Engineering

This paper is a sequel on the topic of localized Lagrange multipliers (LLM) for applications of fluid-structure interaction (FSI) between finite-element models of an acoustic fluid and an elastic structure. The prequel paper formulated the spatial-discretization methods, the LLM interface treatment, the time-marching partitioned analysis procedures, and the application to 1D benchmark problems. Here, we expand on formulation aspects required for successful application to more realistic 2D and 3D problems. Additional topics include duality relations at the fluid-structure interface, partitioned vibration analysis, reduced-order modeling, handling of curved interface surfaces, and comparison of LLM with other coupling methods. Emphasis is given to non-matching fluid-structure meshes. We present benchmark examples that illustrate the benefits and drawbacks of competing interface treatments. Realistic application problems involving the seismic response of two existing dams are considered. These include 2D modal analyses of the Koyna gravity dam, transient-response analyses of that dam with and without reduced-order modeling, incorporation of nonlinear cavitation effects, and the 3D transient-response analysis of the Morrow Point arch dam.

More Details
TYPE Journal Article YEAR 2008
OSTI

Predicting the lifetime of fluorosilicone O-rings

Proposed for publication in Polymer Degradation and Stability.

Long-term (up to 1000 days) accelerated oven-aging studies on a commercial fluorosilicone o-ring seal are used to predict the sealing lifetime at room temperature (23 C). The study follows force decay (relaxation) on squeezed o-ring material using isothermal compression stress relaxation (CSR) techniques. The relaxation is normally a complex mix of reversible physical effects and non-reversible chemical effects but we utilize an over-strain approach to quickly achieve physical equilibrium. This allows us to concentrate the measurements on the chemical relaxation effects of primary interest to lifetime assessment. The long-term studies allow us to access a fairly broad temperature range (80-138 C) which results in improved modeling of the temperature dependence of the accelerated data. Non-Arrhenius behavior is observed with evidence of a significant lowering of the activation energy at the lowest accelerated aging temperature (80 C). This observation is consistent with numerous recent accelerated aging studies that probed temperature ranges large enough to observe similar non-Arrhenius behavior. The extrapolated predictions imply that significant loss of sealing force requires on the order of 50-100 years at 23 C. Field aging results out to 25 years at 23 C are shown to be in reasonable accord with the significant change in Arrhenius slope observed from the accelerated aging study.

More Details
TYPE Journal Article YEAR 2008
OSTI

Shaping the output pulse of a linear-transformer-driver module

Proposed for publication in Physical Review Special Topics: Accelerators and Beams.

Stygar, William A.; Stoltzfus, Brian; Woodworth, Joseph R.; Fowler, William E.; LeChien, Keith R.; Long, Finis W.; Mazarakis, Michael G.; Mckee, G.R.; Mckenney, John; Savage, Mark E.

We demonstrate that a wide variety of current-pulse shapes can be generated using a linear-transformer-driver (LTD) module that drives an internal water-insulated transmission line. The shapes are produced by varying the timing and initial charge voltage of each of the module's cavities. The LTD-driven accelerator architecture outlined in [Phys. Rev. ST Accel. Beams 10, 030401 (2007)] provides additional pulse-shaping flexibility by allowing the modules that drive the accelerator to be triggered at different times. The module output pulses would be combined and symmetrized by water-insulated radial-transmission-line impedance transformers [Phys. Rev. ST Accel. Beams 11, 030401 (2008)].

More Details
TYPE Journal Article YEAR 2008
OSTI
Results 76401–76500 of 99,299
Results 76401–76500 of 99,299