Publications

Results 1–25 of 48
Skip to search filters

Defining component environments and margin through zemblanic consideration of function spaces

Conference Proceedings of the Society for Experimental Mechanics Series

Starr, Michael J.; Segalman, Daniel J.

Historically the qualification process for vehicles carrying vulnerable components has centered around the Shock Response Spectrum (SRS) and qualification consisted of devising a collection of tests whose collective SRS enveloped the qualification SRS. This involves selecting whatever tests are convenient that will envelope the qualification SRS over at least part of its spectrum; this selection is without any consideration of the details of structural response or the nature of anticipated failure of its components. It is asserted that this approach often leads to over-testing, however, as has been pointed out several times in the literature, this approach may not even be conservative. Given the advances in computational and experimental technology in the last several decades, it would be appropriate to seek some strategy of test selection that does account for structural response and failure mechanism and that pushes against the vulnerabilities of that specific structure. A strategy for such a zemblanic (zemblanity is the opposite of serendipity, the faculty of making unhappy, unlucky and expected discoveries by design) approach is presented.

More Details
TYPE Conference Poster YEAR 2020
ScopusOSTIDOI

Comparison of time-domain objective functions in dynamic fixture optimization

Conference Proceedings of the Society for Experimental Mechanics Series

Starr, Michael J.; Walsh, Timothy W.

Differences in impedance are usually observed when components are tested in fixtures at lower levels of assembly from those in which they are fielded. In this work, the Kansas City National Security Campus (KCNSC) test bed hardware geometry is used to explore the sensitivity of the form of the objective function on the adequate reproduction of relevant response characteristics at the next level of assembly. Inverse methods within Sandia National Laboratories’ Sierra/SD code suite along with the Rapid Optimization Library (ROL) are used for identifying an unknown material (variable shear and bulk modulus) distributed across a predefined fixture volume. Comparisons of the results between time-domain based objective functions are presented. The development of the objective functions, solution sensitivity, and solution convergence will be discussed in the context of the practical considerations required for creating a realizable set of test hardware based on the variable-modulus optimized solutions.

More Details
TYPE Conference Poster YEAR 2019
ScopusOSTIDOI

Force Reconstruction from Ejection Tests of Stores from Aircraft Used for Model Predictions and Missing/Bad Gages

Ross, Michael R.; Cap, Jerome S.; Starr, Michael J.; Urbina, Angel U.; Brink, Adam R.

One of the more severe environments for a store on an aircraft is during the ejection of the store. During this environment it is not possible to instrument all component responses, and it is also likely that some instruments may fail during the environment testing. This work provides a method for developing these responses from failed gages and uninstrumented locations. First, the forces observed by the store during the environment are reconstructed. A simple sampling method is used to reconstruct these forces given various parameters. Then, these forces are applied to a model to generate the component responses. Validation is performed on this methodology.

More Details
TYPE Conference Poster YEAR 2015
OSTIDOI

Application of viscous and iwan modal damping models to experimental measurements from bolted structures

Journal of Vibration and Acoustics, Transactions of the ASME

Deaner, Brandon J.; Allen, Matthew S.; Starr, Michael J.; Segalman, Daniel J.; Sumali, Hartono S.

Measurements are presented from a two-beam structure with several bolted interfaces in order to characterize the nonlinear damping introduced by the joints. The measurements (all at force levels below macroslip) reveal that each underlying mode of the structure is well approximated by a single degree-of-freedom (SDOF) system with a nonlinear mechanical joint. At low enough force levels, the measurements show dissipation that scales as the second power of the applied force, agreeing with theory for a linear viscously damped system. This is attributed to linear viscous behavior of the material and/or damping provided by the support structure. At larger force levels, the damping is observed to behave nonlinearly, suggesting that damping from the mechanical joints is dominant. A model is presented that captures these effects, consisting of a spring and viscous damping element in parallel with a four-parameter Iwan model. The parameters of this model are identified for each mode of the structure and comparisons suggest that the model captures the stiffness and damping accurately over a range of forcing levels.

More Details
TYPE Journal Article YEAR 2015
ScopusOSTIDOI

Proceedings of the Third International Workshop on Jointed Structures

Starr, Michael J.; Brake, Matthew R.; Segalman, Daniel J.

The Third International Workshop on Jointed Structures was held from August 16th to 17th, 2012, in Chicago Illinois, following the ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Thirty two researchers from both the United States and international locations convened to discuss the recent progress of mechanical joints related research and associated efforts in addition to developing a roadmap for the challenges to be addressed over the next five to ten years. These proceedings from the workshop include the minutes of the discussions and follow up from the 2009 workshop [1], presentations, and outcomes of the workshop. Specifically, twelve challenges were formulated from the discussions at the workshop, which focus on developing a better understanding of uncertainty and variability in jointed structures, incorporating high fidelity models of joints in simulations that are tractable/efficient, motivating a new generation of researchers and funding agents as to the importance of joint mechanics research, and developing new insights into the physical phenomena that give rise to energy dissipation in jointed structures. The ultimate goal of these research efforts is to develop a predictive model of joint mechanics.

More Details
TYPE SAND Report YEAR 2013
OSTIDOI
Results 1–25 of 48
Results 1–25 of 48