Publications

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Variables influencing inferences about a stranger's goal during an unsolicited social interaction were explored. Experiment 1 developed a procedure for identifying cues. Experiments 2 and 3 assessed the relative importance of various cues (space, time, characteristics of oneself, characteristics of the stranger, and the stranger's behavior) for goal judgments. Results indicated that situational context cues informed goal judgments in ways that were consistent with diagnosticity ratings and typicality ratings of those cues. Stranger characteristics and stranger behaviors affected goal judgments more than would be expected from these quantitative measures of their informativeness. Nonetheless, the results are consistent with a mental model view that assumes perceivers monitor situational cues present during interactions and that goal inferences are guided by the informativeness of these cues.

Sandia national laboratories (SNL) and lockheed martin MS2 are designing an electromagnetic missile launcher (EMML) for naval applications. The EMML uses an induction coilgun topology with the requirement of launching a 3600 lb. missile up to a velocity of 40 m/s. To demonstrate the feasibility of the electromagnetic propulsion design, a demonstrator launcher was built that consists of approximately 10% of the propulsion coils needed for a tactical design. The demonstrator verified the design by launching a 1430 lb weighted sled to a height of 24 ft in mid-December 2004 (Figure 1). This paper provides the general launcher design, specific pulsed power system component details, system operation, and demonstration results.

Abstract not provided.

Abstract not provided.

In this study, we perform molecular dynamics simulations of adhesive contact and friction between alkylsilane Si(OH){sub 3}(CX{sub 2}){sub 10}CX{sub 3} and alkoxylsilane Si(OH){sub 2}(CX{sub 2}){sub 10}CX{sub 3} (where X = H or F) self-assembled monolayers (SAMs) on an amorphous silica substrate. The alkylsilane SAMs are primarily hydrogen-bonded or physisorbed to the surface. The alkoxylsilane SAMs are covalently bonded or chemisorbed to the surface. Previously, we studied the chemisorbed systems. In this work, we study the physisorbed systems and compare the tribological properties with the chemisorbed systems. Furthermore, we examine how water at the interface of the SAMs and substrate affects the tribological properties of the physisorbed systems. When less than a third of a monolayer is present, very little difference in the microscopic friction coefficient {mu} or shear stresses is observed. For increasing amounts of water, the values of {mu} and the shear stresses decrease; this effect is somewhat more pronounced for fluorocarbon alkylsilane SAMs than for the hydrocarbon SAMs. The observed decrease in friction is a consequence of a slip plane that occurs in the water as the amount of water is increased. We studied the frictional behavior using relative shear velocities ranging from v = 2 cm/s to 2 m/s. Similar to previously reported results for alkoxylsilane SAMs, the values of the measured stress and {mu} for the alkylsilane SAM systems decrease monotonically with v.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We present extensive simulations modeling the casting of multiblock polymer films by evaporation. The domain structure of the resulting film is strongly affected by varying the relative stiffness of the coblocks. The morphology changes from a bicontinuous lamellar phase when both blocks are flexible to a small-scale phase-separated phase with isolated domains as the stiffness of one of the blocks increases. As the relative stiffness of the blocks changes, the rate of evaporation, interfacial width, and morphology of the system changes. The findings can be used to tailor membrane morphology of interest to fuel-cell applications where the morphology is important for proton conduction.

Abstract not provided.

Abstract not provided.

While it had been known for a long time how to transform an asymmetric traveling salesman (ATS) problem on the complete graph with n vertices into a symmetric traveling salesman (STS) problem on an incomplete graph with 2n vertices, no method was available for using this correspondence to derive facets of the symmetric polytope from facets of the asymmetric polytope until the work of E. Balas and M. Fischetti in [Lifted cycle inequalities for the asymmetric traveling salesman problem, Mathematics of Operations Research 24 (2) (1999) 273-292] suggested an approach. The original Balas-Fischetti method uses a standard sequential lifting procedure for the computation of the coefficient of the edges that are missing in the incomplete STS graph, which is a difficult task when addressing classes of (as opposed to single) inequalities. In this paper we introduce a systematic procedure for accomplishing the lifting task. The procedure exploits the structure of the tight STS tours and organizes them into a suitable tree structure. The potential of the method is illustrated by deriving large new classes of facet-defining STS inequalities.

Abstract not provided.

We report the demonstration of distributed-feedback terahertz quantum-cascade lasers based on a first-order grating fabricated via a lateral corrugation in a double-sided metal ridge waveguide. The phase of the facet reflection was precisely set by lithographically defined facets by dry etching. Single-mode emission was observed at low to moderate injection currents, although multimode emission was observed far beyond threshold owing to spatial hole burning. Finite-element simulations were used to calculate the modal and threshold characteristics for these devices, with results in good agreement with experiments.

Abstract not provided.

Abstract not provided.

Abstract not provided.

This document is intended to serve as a users guide for the time-domain atmospheric acoustic propagation suite (TDAAPS) program developed as part of the Department of Defense High-Performance Modernization Office (HPCMP) Common High-Performance Computing Scalable Software Initiative (CHSSI). TDAAPS performs staggered-grid finite-difference modeling of the acoustic velocity-pressure system with the incorporation of spatially inhomogeneous winds. Wherever practical the control structure of the codes are written in C++ using an object oriented design. Sections of code where a large number of calculations are required are written in C or F77 in order to enable better compiler optimization of these sections. The TDAAPS program conforms to a UNIX style calling interface. Most of the actions of the codes are controlled by adding flags to the invoking command line. This document presents a large number of examples and provides new users with the necessary background to perform acoustic modeling with TDAAPS.

Abstract not provided.

Near-edge X-ray absorption fine structure spectroscopy (NEXAFS) is utilized to provide insight into surface chemical effects in model photoresist films. First, NEXAFS was used to examine the resist/air interface including surface segregation of a photoacid generator (PAG) and the extent of surface deprotection in the film. The concentration of PAG at the resist-air interface was higher than the bulk concentration, which led to a faster deprotection rate at that interface. Second, a NEXAFS depth profiling technique was utilized to probe for compositional gradients in model resist line edge regions. In the model line edge region, the surface composition profile for the developed line edge was dependent on the post exposure bake time. © 2005 American Chemical Society.

Synchrotron-source X-ray computerized microtomography (CMT) was used to evaluate the adsorptive properties of aggregate soil samples. A linear relationship between measured mean mass attenuation coefficient (σ) and mass fraction iron was generated by imaging mineral standards with known iron contents. On the basis of reported stoichiometries of the clay minerals and identifications of iron oxyhydroxides (1), we calculated the mass fraction iron and iron oxyhydroxide in the intergranular material. The mass fractions of iron were estimated to range from 0.17 to 0.22 for measurements made at 18 keV and from 0.18 to 0.21 for measurements made at 26 keV. One aggregate sample also contained regions within the intergranular material with mass fraction iron ranging from 0.29 to 0.31 and from 0.33 to 0.36 for the 18 and 26 keV measurements, respectively. The mass fraction iron oxyhydroxide ranged from 0.18 to 0.35 for the low-iron intergranular material and from 0.40 to 0.59 for the high-iron intergranular material. Using absorption edge difference imaging with CMT, we visualized cesium on the intergranular material, presumably because of adsorption and possible exchange reactions. By characterizing the mass fraction iron, the mass fraction iron oxyhydroxide, and the adsorptive capacity of these soil mineral aggregates, we provide information useful for conceptualization, development, and parametrization of transport models. © 2005 American Chemical Society.

The properties of a particle composite can be controlled by organizing the particles into assemblies. The properties of the composite will depend on the structure of the particle assemblies, and for any give property there is some optimal structure. Through simulation and experiment we show that the application of heterodyned triaxial magnetic or electric fields generates structures that optimize the magnetic and dielectric properties of particle composites. We suggest that optimizing these properties optimizes other properties, such as transport properties, and we give as one example of this optimization the magnetostriction of magnetic particle composites formed in a silicone elastomer. © 2005 Elsevier Ltd. All rights reserved.

A new aminosilicate, sol-gel derived microporous inorganic membrane has been developed for enhanced CO2 separation in applications such as removal of metabolic CO2 from the breathing loop of the NASA extravehicular mobility unit (EMU), natural gas purification, or CO2 capture from coal-fired power plant emissions. This membrane consists of an inorganic, amorphous silica matrix of pore size 4-5 Å, containing randomly dispersed amine (NH2) functional groups in order to enhance its CO2 selectivity, due to preferential adsorption of CO 2 in the membrane pore walls and simultaneous blocking of permeation of other gases (O2, N2 and CH4). It is found that the gas feed condition during permeation (partial pressure of CO 2, relative humidity), post-synthetic treatments and aging, affect significantly the separation performance of the membranes. At this stage of development, with feeds of 1-20 vol.% CO2 and 0-40% relative humidity at 22 °C, the highest CO2:N2 separation factor was in the range 100-200, while the CO2 permeance was in the range 0.1-1.5 cm3 (STP)/(cm2 min atm). The results suggest that controlling the membrane pore size and method of activation of amine groups are the most critical factors for improving the CO 2-permselectivity of the membrane. © 2004 Elsevier B.V. All rights reserved.

We present pulse shaping techniques to obtain compressive stress - strain data for elastic - plastic materials with a split Hopkinson pressure bar. The conventional split Hopkinson pressure bar apparatus is modified by placing a combination of copper and steel pulse shapers on the impact surface of the incident bar. After impact by the striker bar, the copper - steel pulse shaper deforms plastically and spreads the pulse in the incident bar so that the sample is nearly in dynamic stress equilibrium and has a nearly constant strain rate in the plastic response region. We present analytical models and data that show a broad range of incident strain pulses can be obtained by varying the pulse shaper geometry and striking velocity. For an application, we present compressive stress - strain data for 4340 Rc 43 steel. © 2005 Society for Experimental Mechanics.

Failure modeling is inherently a multi length scale phenomenon that requires a failure model and a computational method that solves for stress/strain gradients at interesting locations. Focusing on the computational method, we recognize that the mesh resolution must be relatively fine in regions where failure is expected and relatively coarse elsewhere. Furthermore, in some modeling approaches the topology in the structural model is different than that required in the fine scale model where failure is to be predicted. This necessarily precludes approaches such as h-adaptivity. We are therefore led to consider multiscale approaches to solve these problems.This work describes an approach to solve multiple (a reference scale and fine scale) coupled boundary value problems for the purpose of nonlinear quasistatic stress analysis. Two examples are included: one example illustrates the multiscale solution strategy to perform quasistatic stress analysis and the other demonstrates the computational beginnings of the ability to model material failure. © 2005 Elsevier B.V. All rights reserved.

Abstract not provided.

Abstract not provided.

Abstract not provided.

One critical aspect of any denuclearization of the Democratic People’s Republic of Korea (DPRK) involves dismantlement of its nuclear facilities and management of their associated radioactive wastes. The decommissioning problem for its two principal operational plutonium facilities at Yongbyun, the 5MWe nuclear reactor and the Radiochemical Laboratory reprocessing facility, alone present a formidable challenge. Dismantling those facilities will create radioactive waste in addition to existing inventories of spent fuel and reprocessing wastes. Negotiations with the DPRK, such as the Six Party Talks, need to appreciate the enormous scale of the radioactive waste management problem resulting from dismantlement. The two operating plutonium facilities, along with their legacy wastes, will result in anywhere from 50 to 100 metric tons of uranium spent fuel, as much as 500,000 liters of liquid high-level waste, as well as miscellaneous high-level waste sources from the Radiochemical Laboratory. A substantial quantity of intermediate-level waste will result from disposing 600 metric tons of graphite from the reactor, an undetermined quantity of chemical decladding liquid waste from reprocessing, and hundreds of tons of contaminated concrete and metal from facility dismantlement. Various facilities for dismantlement, decontamination, waste treatment and packaging, and storage will be needed. The shipment of spent fuel and liquid high level waste out of the DPRK is also likely to be required. Nuclear facility dismantlement and radioactive waste management in the DPRK are all the more difficult because of nuclear nonproliferation constraints, including the call by the United States for “complete, verifiable and irreversible dismantlement,” or “CVID.” It is desirable to accomplish dismantlement quickly, but many aspects of the radioactive waste management cannot be achieved without careful assessment, planning and preparation, sustained commitment, and long completion times. The radioactive waste management problem in fact offers a prospect for international participation to engage the DPRK constructively. DPRK nuclear dismantlement, when accompanied with a concerted effort for effective radioactive waste management, can be a mutually beneficial goal.

Time domain reflectometry (TDR) operates by propagating a radar frequency electromagnetic pulse down a transmission line while monitoring the reflected signal. As the electromagnetic pulse propagates along the transmission line, it is subject to impedance by the dielectric properties of the media along the transmission line (e.g., air, water, and sediment), reflection at dielectric discontinuities (e.g., air-water or water-sediment interface), and attenuation by electrically conductive materials (e.g., salts and clays). Taken together, these characteristics provide a basis for integrated stream monitoring, specifically, concurrent measurement of stream stage, channel profile, and aqueous conductivity. Requisite for such application is a means of extracting the desired stream parameters from measured TDR traces. Analysis is complicated by the fact that interface location and aqueous conductivity vary concurrently and multiple interfaces may be present at any time. For this reason a physically based multisection model employing the S11 scatter function and Debeye parameters for dielectric dispersion and loss is used to analyze acquired TDR traces. Here we explore the capability of this multisection modeling approach for interpreting TDR data acquired from complex environments, such as encountered in stream monitoring. A series of laboratory tank experiments was performed in which the depth of water, depth of sediment, and conductivity were varied systematically. Comparisons between modeled and independently measured data indicate that TDR measurements can be made with an accuracy of ±3.4 × 10-3 m for sensing the location of an air-water or water-sediment interface and ±7.4% of actual for the aqueous conductivity.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

The thrust from a multi-cycle, pulse detonation engine operating at practical flight altitudes will vary with the surrounding environment pressure. We have carried out the first experimental study using a detonation tube hung in a ballistic pendulum arrangement within a large pressure vessel in order to determine the effect that the environment has on the single-cycle impulse. The air pressure inside the vessel surrounding the detonation tube varied between 100 and 1.4 kPa while the initial pressure of the stoichiometric ethylene-oxygen mixture inside the tube varied between 100 and 30 kPa. The original impulse model (Wintenberger et al., Journal of Propulsion and Power, Vol. 19, No. 1, 2002) was modified to predict the observed increase in impulse and blow down time as the environment pressure decreased below one atmosphere. Comparisons between the impulse from detonation tubes and ideal, steady flow rockets indicate incomplete expansion of the detonation tube exhaust, resulting in a 37% difference in impulse at a pressure ratio (ratio of pressure behind the Taylor wave to the environment pressure) of 100.

Smart polymeric materials, such as piezoelectric polymers which deform by application of an electric field, are of interest for use in controllable mirrors as large, lightweight space optics. An important consideration when using any organic material in a space application is their extreme vulnerability to the space environment. In LEO the presence of atomic oxygen, large thermal extremes, hard vacuum, short wavelength ultraviolet and particulate radiation can result in erosion, cracking and outgassing of most polymers. While much research has been performed examining the physical and chemical changes incurred by polymers exposed to actual and simulated LEO environments, little work has focused on the effects of the space environment on the performance of piezoelectric polymers. The most widely used piezoelectric polymers are those based on poly(vinylidene fluoride) (PVDF) and include copolymers synthesized from vinylidene fluoride and trifluoroethylene, hexafluoropropylene or chlorotrifluoroethylene. The presence of a comonomer group can greatly influence on the crystalline phase, melting point, Curie point, modulus and processing required for piezoelectricity. After a rigorous pre-selection process only two polymers, namely the PVDF homopolymer and a TrFE copolymer (80% comonomer content), satisfied most of the requirements for operation in the temperature/radiation environment of LEO. Based on this initial materials selection, we have now performed a detailed study of the effects of temperature, atomic oxygen and vacuum UV radiation simulating low Earth orbit conditions on these two polymers. Both polymers exhibited diminished but very stable piezoelectric performance up to 130 C despite the upper use temperatures suggested by industry of 80 C (PVDF) and 100 C (P(VDF-TrFE)). We believe that the loss of piezoelectric response in samples conditioned at 130 C compared with non-exposed samples is partly due to the depoling process which occurs when the highly stressed films undergo contraction via relaxation. The TrFE copolymer, which does not need to be stretched for the polar phase to be present, has better retention of piezoelectric properties at 130 C compared with the highly oriented homopolymer. AO/VUV exposure caused significant surface erosion and pattern development for both polymers. Erosion yields were 2.8 x 10{sup -24} cm{sup 3}/atom for PVDF and 2.5 x 10{sup -24} cm{sup 3}/atom for P(VDF-TrFE). The piezoelectric properties of the residual material for both polymers were largely unchanged after exposure, although a slight shift in the Curie transition of the P(VDF-TrFE) was observed. A lightly crosslinked network was formed in the copolymer, presumably due to penetrating VUV radiation, while the homopolymer remained uncrosslinked. These differences were attributed to different levels of crystallinity and increased VUV absorption by P(VDF-TrFE) over PVDF. In this paper a summary of the performance limiting effects of temperature, radiation, atomic oxygen and VUV on the piezoelectric response of PVDF based polymers will be presented.

With multipath routing in mobile ad hoc networks (MANETs), a source can establish multiple routes to a destination for routing data. In MANETs, mulitpath routing can be used to provide route resilience, smaller end-to-end delay, and better load balancing. However, when the multiple paths are close together, transmissions of different paths may interfere with each other, causing degradation in performance. Besides interference, the physical diversity of paths also improves fault tolerance. We present a purely distributed multipath protocol based on the AODV-Multipath (AODVM) protocol called AODVM with Path Diversity (AODVM/PD) that finds multiple paths with a desired degree of correlation between paths specified as an input parameter to the algorithm. We demonstrate through detailed simulation analysis that multiple paths with low degree of correlation determined by AODVM/PD provides both smaller end-to-end delay than AODVM in networks with low mobility and better route resilience in the presence of correlated node failures.

We report a simple, rapid approach to synthesize water-soluble and biocompatible fluorescent quantum dot (QD) micelles by encapsulation of monodisperse, hydrophobic QDs within surfactant/lipid micelles. Analyses of UV-vis and photo luminescence spectra, along with transmission electron microscopy, indicate that the water-soluble semiconductor QD micelles are monodisperse and retain the optical properties of the original hydrophobic QDs. The QD micelles were shown to be biocompatible and exhibited little or no aggregation when taken up by cultured rat hippocampal neurons.

Abstract not provided.

Abstract not provided.

The effects of atomic oxygen (AO) and vacuum UV radiation simulating low Earth orbit conditions on two commercially available piezoelectric polymer films, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-trifluoroethylene) P(VDF-TrFE), have been studied. Surface erosion and pattern development are significant for both polymers. Erosion yields were determined as 2.8 x 10{sup -24} cm{sup 3}/atom for PVDF and 2.5 x 10{sup -24} cm{sup 3}/atom for P(VDF-TrFE). The piezoelectric properties of the residual material of both polymers were largely unchanged after exposure, although a slight shift in the Curie transition of the P(VDF-TrFE) was observed. A lightly cross-linked network was formed in the copolymer presumably because of penetrating vacuum ultraviolet (VUV) radiation, while the homopolymer remained uncross-linked. These differences were attributed to varying degrees of crystallinity and potentially greater absorption, and hence damage, of VUV radiation in P(VDF-TrFE) compared with PVDF.

Abstract not provided.

Abstract not provided.