Radiation-hard high-voltage vertical GaN p-n diodes are being developed for use in power electronics subjected to ionizing radiation. We present a comparison of the measured and simulated photocurrent response of diodes exposed to ionizing irradiation with 70 keV and 20 MeV electrons at dose rates in the range of 1.4× 107 - 5.0× 108 rad(GaN)/s. The simulations correctly predict the trend in the measured steady-state photocurrent and agree with the experimental results within a factor of 2. Furthermore, simulations of the transient photocurrent response to dose rates with uniform and non-uniform ionization depth profiles uncover the physical processes involved that cannot be otherwise experimentally observed due to orders of magnitude larger RC time constant of the test circuit. The simulations were performed using an eXploratory Physics Development code developed at Sandia National Laboratories. The code offers the capability to include defect physics under more general conditions, not included in commercially available software packages, extending the applicability of the simulations to different types of radiation environments.
Doucet, Mathieu; Browning, James F.; Doyle, Barney L.; Charlton, Timothy R.; Ambaye, Haile; Seo, Joohyun; Mazza, Alessandro R.; Wenzel, John F.; Burns, George B.; Wixom, Ryan R.; Veith, Gabriel M.
Haynes 230 nickel alloy is one of the main contenders for salt containment in the design of thermal energy storage systems based on molten salts. A key problem for these systems is understanding the corrosion phenomena at the alloy–salt interface, and, in particular, the role played by chromium in these processes. In this study, thin films of Haynes 230, which is also rich in chromium, were measured with polarized neutron reflectometry and Rutherford backscattering spectrometry as a function of annealing temperature. Migration of chromium to the surface was observed for films annealed at 400 and 600 °C. Combining the two techniques determined that more than 60% of chromium comprising the as-prepared Haynes 230 layer moves to the surface when annealed at 600 °C, where it forms an oxide layer.
The National Nuclear Security Administration’s Tritium Sustainment Program is responsible for the design, development, demonstration, testing, analysis, and characterization of tritium-producing burnable absorber rods (TPBARs) and their components used to produce tritium for the nation’s strategic stockpile. The FY19 call for proposals included the specific basic science research topic, “Demonstration and evaluation of advanced characterization methods, particularly for quantifying the concentration of light isotopes (1H, 3H, 3He, and 4He, 6Li and 7Li) in metal or ceramic matrices”. Last year the same language appeared in the call for proposals, and a project IWO-389859 was awarded to the Ion Beam Lab (IBL) at Sandia-NM which was successful using Elastic Recoil Detection, but in the future could have resulted in tritium contamination that jeopardized other equally important NNSA projects. An alternative approach using deuterium nuclear reaction analysis was proposed and funded in FY2019 which was also successful and eliminated any possibility of contaminating the Ion Beam Laboratory with tritium, and will be described in this report.
This report documents work done at the Sandia Ion Beam Laboratory to develop a capability to produce 14 Me neutrons at levels sufficient for testing radiation effects on electronic materials and components. The work was primarily enabled by a laboratory directed research and development (LDRD) project. The main elements of the work were to optimize target lifetime, test a new thin- film target design concept to reduce tritium usage, design and construct a new target chamber and beamline optimized for high-flux tests, and conduct tests of effects on electronic devices and components. These tasks were all successfully completed. The improvements in target performance and target chamber design have increased the flux and fluence of 14 MV neutrons available at the test location by several orders of magnitude. The outcome of the project is that a new capability for testing radiation-effects on electronic components from 14 MeV neutrons is now available at Sandia National Laboratories. This capability has already been extensively used for many qualification and component evaluation and development tests.
The National Nuclear Security Administration's Tritium Sustainment Program is responsible for the design, development, demonstration, testing, analysis, and characterization of tritium-producing burnable absorber rods (TPBARs) and their components, in addition to producing tritium for the nation's strategic stockpile. The FY18 call for proposals included the specific basic science research topic, "Demonstration and evaluation of advanced characterization methods, particularly for quantifying the concentration of light isotopes (1H, 2H, and 4He, 6Li, and 7Li) in metal or ceramic matrices". A project IWO-389859 was awarded to the Ion Beam Lab (IBL) at Sandia-NM in FY18. This reports the success we had in developing and demonstrating such a method: 42 MeV Si+ 7 from the IBL' s Tandem was used to recoil these light isotopes into special detectors that separated all these isotopes by simultaneously measuring the energy and stopping power of these reoils. This technique, called Heavy Ion - Elastic Recoil Detection or HI-ERD, accurately measured the enriched 6 Li/Li-total of 0.246 +- 0.016, compared to the known value of 0.239. The isotopes 1H, 2H, 4He, 6Li and 7Li were also measured. (page intentionally left blank)
For this study, diamond-like carbon (DLC) films were tribochemically formed from ambient hydrocarbons on the surface of a highly stable nanocrystalline Pt-Au alloy. A sliding contact between an alumina sphere and Pt-Au coated steel exhibited friction coefficients as low as μ = 0.01 after dry sliding in environments containing trace (ppb) organics. Ex situ analysis indicated that the change in friction coefficient was due to the formation of amorphous carbon films, and Raman spectroscopy and elastic recoil analysis showed that these films consist of sp2/sp3 amorphous carbon with as much as 20% hydrogen. Transmission electron microscopy indicated these films had thicknesses exceeding 100 nm, and were enhanced by the incorporation of worn Pt-Au nanoparticles. The result was highly wear-resistant, low-friction DLC/Pt-Au nanocomposites. Atomistic simulations of hydrocarbons under shear between rigid Pt slabs using a reactive force field showed stress-induced changes in bonding through chain scission, a likely route towards the formation of these coatings. This novel demonstration of in situ tribochemical formation of self-lubricating films has significant impact potential in a wide range of engineering applications.