Publications

American Vacuum Society National Conference presentation on ferroelectric hafnium oxide

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Single particle levitation methods are a powerful subset of aerosol instrumentation that allow a wide range of particle properties and processes to be explored. One of the most common forms of single particle levitation uses electric fields and is generally referred to as an electrodynamic balance (EDB). There are many different kinds of EDB's that have been designed with different applications in mind, and a corresponding array of analytical tools have been developed to characterize particles held in these traps. In this tutorial, we review the design and development of the EDB and discuss a range of analytical methods, including electrostatic analysis, light scattering, spectroscopy, and imaging, that allow for measurements of hygroscopic growth, volatility, surface tension and viscosity, diffusion, and phase and morphology. We go on to review recent advanced analytical methods using mass spectrometry to probe particle composition. This review is intended to provide readers with the basic knowledge to set up an EDB platform, design measurement protocols based on the available analytical tools, and run experiments to probe the fundamental properties of aerosol particles relevant to their role in the atmosphere, impacts on clouds and climate, effects on air quality, role in health and disease, and applications in industrial processes.

Abstract not provided.

Ultimately, our experiment measures two quantities on an aluminum bar: motion (which modeling must predict) and temperature (which sets thermal boundary conditions). For motion, stereo DIC is a technique to use imaging data to provide displacements relative to a reference image down to 1/100th of a pixel. We use a calibrated infrared imaging method for accurate temperature measurements. We will be capturing simultaneous data and then registering temperature data in space to the same coordinate system as the displacement data. While we will later show that our experiments are repeatable, indicating that separate experiments for motion and temperature would provide similar data, the simultaneous and registered data removes test to test variability as a source of uncertainty for model calibration and reduces the number of time-consuming tests that must be performed.

The objective of this project was to evaluate material- and chemical-based solutions for hydrogen storage in rail applications as an alternative to high-pressure hydrogen gas and liquid hydrogen. Three use cases were assessed: yard switchers, long-haul locomotives, and tenders. Four storage options were considered: metal hydrides, nanoporous sorbents, liquid organic hydrogen carriers, and ammonia, using 700 bar compressed hydrogen as a benchmark. The results suggest that metal hydrides, currently the most mature of these options, have the highest potential. Storage in tenders is the most likely use case to be successful, with long-haul locomotives the least likely due to the required storage capacities and weight and volume constraints. Overall, the results are relevant for high-impact regions, such as the South Coast Air Quality Management District, for which an economical vehicular hydrogen storage system with minimal impact on cargo capacity could accelerate adoption of fuel cell electric locomotives. The results obtained here will contribute to the development of technical storage targets for rail applications that can guide future research. Moreover, the knowledge generated by this project will assist in development of material-based storage for stationary applications such as microgrids and backup power for data centers.

Abstract not provided.

This paper is concerned with goal-oriented a posteriori error estimation for nonlinear functionals in the context of nonlinear variational problems solved with continuous Galerkin finite element discretizations. A two-level, or discrete, adjoint-based approach for error estimation is considered. The traditional method to derive an error estimate in this context requires linearizing both the nonlinear variational form and the nonlinear functional of interest which introduces linearization errors into the error estimate. In this paper, we investigate these linearization errors. In particular, we develop a novel discrete goal-oriented error estimate that accounts for traditionally neglected nonlinear terms at the expense of greater computational cost. We demonstrate how this error estimate can be used to drive mesh adaptivity. We show that accounting for linearization errors in the error estimate can improve its effectivity for several nonlinear model problems and quantities of interest. We also demonstrate that an adaptive strategy based on the newly proposed estimate can lead to more accurate approximations of the nonlinear functional with fewer degrees of freedom when compared to uniform refinement and traditional adjoint-based approaches.

Abstract not provided.

Fast and reliable estimation of engineered fracture geometries is a key factor in controlling undesirable fractures and enhancing stimulation design. Measuring the surface deformation gradient (tilt) for engineered fractures in shallow depths (<1000 m) has been proven a reliable source of data to infer fracture geometry, thanks to the impressive resolution of tiltmeter units (in the order of nano-radians). However, solving the inverse problem requires reliable and fast forward models. In this study, we present a fast and reliable machine-learned surrogate model to estimate the ground surface tilt induced by pressurised fractures. The proposed surrogate model, based on Conditional Generative Adversarial Networks (cGAN), receives a fracture aperture map in XY and XZ planes as input and predicts the corresponding surface tilts (in X and Y directions). The surrogate model with Wasserstein loss and gradient penalty has been trained using 11,000 samples and tested for a range of input parameters such as depth, dip angles, elastic properties, fluid pressures and fracture shapes. The testing results show excellent performance of the surrogate model compared with the forward finite element model for both single and multiple pressurised fractures, while running hundreds to potentially thousands of times faster.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Marine aerosol injections are a key component in further understanding of both the potentials of deliberate injection for marine cloud brightening (MCB), a potential climate intervention (CI) strategy, and key aerosol-cloud interaction behaviors that currently form the largest uncertainty in global climate model (GCM) predictions of our climate. Since the rate of spread of aerosols in a marine environment directly translates to the effectiveness and ability of aerosol injections in impacting cloud radiative forcing, it is crucial to understand the spatial and temporal extent of injected-aerosol effects following direct injection into marine environments. The ubiquity of ship-injected aerosol tracks from satellite imagery renders observational validation of new parameterizations possible in 2D, however, 3D compatible data is more scarce, and necessary for the development of subgrid scale parameterizations of aerosol-cloud interactions in GCMs. This report introduces two novel parameterizations of atmospheric aerosol injection behavior suitable for both 3D (GCM-compatible) and 2D (observation-related) modeling. Their applicability is highlighted using a wealth of different observational data: small and larger scale salt-aerosol injection experiments conducted at SNL, 3D large eddy simulations of ship-injected aerosol tracks and 2D satellite images of ship tracks. The power of experimental data in enhancing knowledge of aerosol-cloud interactions is in particular emphasized by studying key aerosol microphysical and optical properties as observed through their mixing in cloud-like environments.

We present methods to estimate parameters for models for the incidence angle modifier for simulating irradiance on a photovoltaic array. The incidence angle modifier quantifies the fraction of direct irradiance that is reflected away at the array’s face, as a function of the direct irradiance’s angle of incidence. Parameters can be estimated from data and the fitting method can be used to convert between models. We show that the model conversion procedure results in models that produce similar annual insolation on a fixed plane.

Abstract not provided.

Mechanical metamaterials are artificial materials with unique global properties due to the structural geometry and material composition of their unit cell. Typically, mechanical metamaterial unit cells are designed such that, when tessellated, they exhibit unique mechanical properties such as zero or negative Poisson's ratio and negative stiffness. Beyond these applications, mechanical metamaterials can be used to achieve tailorable nonlinear deformation responses. Computational methods such as gradient-based topology optimization (TO) and size/shape optimization (SSO) can be implemented to design these metamaterials. However, both methods can lead to suboptimal solutions or a lack of generalizability. Therefore, this research used deep reinforcement learning (DRL), a subset of deep machine learning that teaches an agent to complete tasks through interactive experiences, to design mechanical metamaterials with specific nonlinear deformation responses in compression or tension. The agent learned to design the unit cells by sequentially adding material to a discrete design domain and being rewarded for achieving the desired deformation response. After training, the agent successfully designed unit cells to exhibit desired deformation responses not experienced during training. This work shows the potential of DRL as a high-level design tool for a wide array of engineering applications.

As a follow-up to our previous report on quantum sensing for safeguards, here we delve deeper into quantum-enhanced imaging & spectroscopy and address their relevance to international safeguards. Much of the approaches rely on entangled photons, a quantum phenomenon not possible with classical physics, although just correlated photons will work for some applications, such as ghost imaging. We provide a comprehensive survey of quantum approaches, including multiple entangled photon ghost imaging and spectroscopy techniques. Entangled photons for noise reduction are also described, as well as Non-Line-Of-Sight imaging, compressive techniques, and squeezed light. Of particular interest is the generation of entangled photons with large wavelength separation, such as infrared/visible entangled photon pairs. Such entangled pairs would allow interaction with objects in the IR, such as in the molecular “fingerprint” wavelength region, while the recording device captures the visible photons, thus leveraging the high efficiency and lower cost of visible detectors. Unfortunately, entangled x-ray photons are not practical, which would have been useful for safeguards to interrogate shielded materials. Entangled gamma rays are even further beyond reason. We provide our assessment for application of quantum-enhanced imaging & spectroscopy for international safeguards, including suggested improvements to existing IAEA instruments and destructive assay measurements that are done at IAEA lab facilities.

Abstract not provided.

Mechanical metamaterials are regularly implemented in engineering applications due to their unique properties derived from their structural geometry and material composition. This study incorporates deep reinforcement learning, a subset of machine learning that teaches an agent to complete a task through interactive experiences, into mechanical metamaterial design. The approach creates a design environment for the reinforcement learning agent to iteratively construct metamaterials with tailorable deformation and hysteretic characteristics. Validation involved producing metamaterials with a thermoplastic polyurethane (TPU) base material that exhibited the deformation response of expanded thermoplastic polyurethane (E-TPU) while maximizing or minimizing hysteresis in cyclic compression. This alignment confirmed the feasibility of tailoring deformation and energy manipulation using mechanical metamaterials. The agent's generalizability was tested by tasking it to create various metamaterials with distinct loading deformation responses and specific hysteresis goals in a simulated setting. The agent consistently delivered metamaterials that met loading curve criteria and demonstrated favorable energy return. This work demonstrates the potential of deep reinforcement learning as a rapid and effective tool for designing mechanical metamaterials with customizable traits. It ushers in the possibility of on-demand metamaterial design solutions, opening avenues across industries like footwear, wearables, and medical equipment.

The U.S. Strategic Petroleum Reserve (SPR) is a crude oil storage system administered by the U.S. Department of Energy. SPR injected a total of over 230 MMB of raw water into 48 caverns as part of oil sales in CY22. Leaching effects were monitored in these caverns to understand how the sales operations may impact the long-term integrity of the caverns. The leaching effects were modeled here using the Sandia Solution Mining Code, SANSMIC. The modeling results indicate that leaching-induced features do not raise concern for the majority of the caverns. In addition to 12 caverns identified in previous leaching reports, seven caverns have been identified for further monitoring based on the results of this report. Twenty-two caverns had pre- and post-leach sonars that were compared with SANSMIC results. Overall, SANSMIC was able to capture the leaching well.

The Ghareb Formation is a shallowly buried porous chalk in southern Israel that is being considered as a host rock for a geologic nuclear waste repository. Setup and operation of a repository will induce significant mechanical, hydrological and chemical perturbations in the Ghareb. Developing a secure repository requires careful characterization of the rock behavior to different loads. To characterize hydromechanical behavior of the Ghareb, several short- and long-term deformation experiments were conducted. Hydrostatic loading tests were conducted both dry and water-saturated, using different setups to measure elastic properties, time-dependent behavior, and permeability. A set of triaxial tests were conducted to measure the elastic properties and rock strength under differential loading at dry and water-saturated conditions. The hydrostatic tests showed the Ghareb began to deform inelastically around 12–15 MPa, a relatively low effective pressure. Long-term permeability measurements demonstrated that permeability declined with increasing effective pressure and was permanently reduced by ~ 1 order of magnitude after unloading pressure. Triaxial tests showed that water saturation significantly degrades the rock properties of the Ghareb, indicating water-weakening is a significant risk during repository operation. Time-dependent deformation is observed during hold periods of both the hydrostatic and triaxial tests, with deformation being primarily visco-plastic. The rate of deformation and permeability loss is strongly controlled by the effective pressure as well. Additionally, during holds of both hydrostatic and triaxial tests, it is observed that when water-saturated, radial strain surpassed axial strain when above effective pressures of 13–20 MPa. Thus, deformation anisotropy may occur in situ during operations even if the stress conditions are hydrostatic when above this pressure range.