Austenitic stainless steels are used extensively in hydrogen gas containment components due to their known resilience in hydrogen environments. Depending on the conditions, degradation can occur in austenitic stainless steels but typically the materials retain sufficient mechanical properties within such extreme environments. In many hydrogen containment applications, it is necessary or advantageous to join components through welding as it ensures minimal gas leakage, unlike mechanical fittings that can become leak paths that develop over time. Over the years many studies have focused on the mechanical behavior of austenitic stainless steels in hydrogen environments and determined their properties to be sufficient for most applications. However, significantly less data have been generated on austenitic stainless steel welds, which can exhibit more degradation than the base material. In this paper, we assess the trends observed in austenitic stainless steel welds tested in hydrogen. Experiments of welds including tensile and fracture toughness testing are assessed and comparisons to behavior of base metals are discussed.
This work proposes a finite element (FE) analysis workflow to simulate directed energy deposition (DED) additive manufacturing at a macroscopic length scale (i.e. part length scale) and to predict thermal conditions during manufacturing, as well as distortions, strength and residual stresses at the completion of manufacturing. The proposed analysis method incorporates a multi-step FE workflow to elucidate the thermal and mechanical responses in laser engineered net shaping (LENS) manufacturing. For each time step, a thermal element activation scheme captures the material deposition process. Then, activated elements and their associated geometry are analyzed first thermally for heat flow due to radiation, convection, and conduction, and then mechanically for the resulting stresses, displacements, and material property evolution. Simulations agree with experimentally measured in situ thermal measurements for simple cylindrical build geometries, as well as general trends of local hardness distribution and plastic strain accumulation (represented by relative distribution of geometrically necessary dislocations).
Directed energy deposited (DED) and forged austenitic stainless steels possess dissimilar microstructures but can exhibit similar mechanical properties. In this study, annealing was used to evolve the microstructure of both conventional wrought and DED type 304L austenitic stainless steels, and significant differences were observed. In particular, the density of geometrically necessary dislocations and hardness were used to probe the evolution of the microstructure and properties. Forged type 304L exhibited the expected decrease in measured dislocation density and hardness as a function of annealing temperature. The more complex microstructure–property relationship observed in the DED type 304L material is attributed to compositional heterogeneities in the solidification microstructure.
