Publications

Jared, Bradley H.; Madison, Jonathan D.; Mitchell, John A.; Saiz, David J.; Koepke, Joshua R.; Dagel, Daryl D.; Ivanoff, Thomas I.

Abstract not provided.

Gallegos, Michael A.; Dagel, Daryl D.; Dagel, Amber L.; Pomerene, Andrew P.; Vawter, Gregory A.; Skogen, Erik J.; Kaehr, Bryan J.

Abstract not provided.

Ivanoff, Thomas I.; Madison, Jonathan D.; Mitchell, John A.; Dagel, Daryl D.; Jared, Bradley H.

Abstract not provided.

Birch, Gabriel C.; Redman, Brian J.; Dagel, Amber L.; Kaehr, Bryan J.; Dagel, Daryl D.; LaCasse, Charles F.; Quach, Tu-Thach Q.; Sahakian, Meghan A.

Abstract not provided.

Additive Manufacturing

Kustas, Andrew K.; Fancher, Chris M.; Whetten, Shaun R.; Dagel, Daryl D.; Michael, Joseph R.; Susan, D.F.

Control of the atomic structure, as measured by the extent of the embrittling B2 chemically ordered phase, is demonstrated in intermetallic alloys through additive manufacturing (AM) and characterized using high fidelity neutron diffraction. As a layer-by-layer rapid solidification process, AM was employed to suppress the extent of chemically ordered B2 phases in a soft ferromagnetic Fe-Co alloy, as a model material system of interest to electromagnetic applications. The extent of atomic ordering was found to be insensitive to the spatial location within specimens and suggests that the thermal conditions within only a few AM layers were most influential in controlling the microstructure, in agreement with the predictions from a thermal model for welding. Analysis of process parameter effects on ordering found that suppression of B2 phase was the result of an increased average cooling rate during processing. AM processing parameters, namely interlayer interval time and build velocity, were used to systematically control the relative fraction of ordered B2 phase in specimens from 0.49 to 0.72. Hardness of AM specimens was more than 150% higher than conventionally processed bulk material. Implications for tailoring microstructures of intermetallic alloys are discussed.

Madison, Jonathan D.; Ivanoff, Thomas I.; Mitchell, John A.; Dagel, Daryl D.; Koepke, Joshua R.; Saiz, David J.; Jared, Bradley H.

Abstract not provided.

Redman, Brian J.; Quach, Tu-Thach Q.; Sahakian, Meghan A.; LaCasse, Charles F.; Dagel, Amber L.; Dagel, Daryl D.; Kaehr, Bryan J.; Birch, Gabriel C.

Abstract not provided.

Mitchell, John A.; Ivanoff, Thomas I.; Dagel, Daryl D.; Jared, Bradley H.; Koepke, Joshua R.; Saiz, David J.; Swiler, Laura P.

Abstract not provided.

Computational Mechanics

Salloum, Maher S.; Johnson, Kyle J.; Bishop, Joseph E.; Aytac, Jon M.; Dagel, Daryl D.; van Bloemen Waanders, Bart G.

New manufacturing technologies such as additive manufacturing require research and development to minimize the uncertainties in the produced parts. The research involves experimental measurements and large simulations, which result in huge quantities of data to store and analyze. We address this challenge by alleviating the data storage requirements using lossy data compression. We select wavelet bases as the mathematical tool for compression. Unlike images, additive manufacturing data is often represented on irregular geometries and unstructured meshes. Thus, we use Alpert tree-wavelets as bases for our data compression method. We first analyze different basis functions for the wavelets and find the one that results in maximal compression and miminal error in the reconstructed data. We then devise a new adaptive thresholding method that is data-agnostic and allows a priori estimation of the reconstruction error. Finally, we propose metrics to quantify the global and local errors in the reconstructed data. One of the error metrics addresses the preservation of physical constraints in reconstructed data fields, such as divergence-free stress field in structural simulations. While our compression and decompression method is general, we apply it to both experimental and computational data obtained from measurements and thermal/structural modeling of the sintering of a hollow cylinder from metal powders using a Laser Engineered Net Shape process. The results show that monomials achieve optimal compression performance when used as wavelet bases. The new thresholding method results in compression ratios that are two to seven times larger than the ones obtained with commonly used thresholds. Overall, adaptive Alpert tree-wavelets can achieve compression ratios between one and three orders of magnitude depending on the features in the data that are required to preserve. These results show that Alpert tree-wavelet compression is a viable and promising technique to reduce the size of large data structures found in both experiments and simulations.

Mitchell, John A.; Ivanoff, Thomas I.; Madison, Jonathan D.; Dagel, Daryl D.; Jared, Bradley H.

Abstract not provided.

Jared, Bradley H.; Madison, Jonathan D.; Ivanoff, Thomas I.; Swiler, Laura P.; Saiz, David J.; Dagel, Daryl D.; Mitchell, John A.; Koepke, Joshua R.

Abstract not provided.

Madison, Jonathan D.; Dagel, Daryl D.; Ivanoff, Thomas I.; Jared, Bradley H.; Koepke, Joshua R.; Mitchell, John A.; Saiz, David J.; Swiler, Laura P.

Abstract not provided.

Proceedings of SPIE - The International Society for Optical Engineering

Birch, Gabriel C.; Redman, Brian J.; Dagel, Amber L.; Kaehr, Bryan J.; Dagel, Daryl D.; LaCasse, Charles F.; Quach, Tu-Thach Q.; Galiardi, Meghan

We investigate the feasibility of additively manufacturing optical components to accomplish task-specific classification in a computational imaging device. We report on the design, fabrication, and characterization of a non-traditional optical element that physically realizes an extremely compressed, optimized sensing matrix. The compression is achieved by designing an optical element that only samples the regions of object space most relevant to the classification algorithms, as determined by machine learning algorithms. The design process for the proposed optical element converts the optimal sensing matrix to a refractive surface composed of a minimized set of non-repeating, unique prisms. The optical elements are 3D printed using a Nanoscribe, which uses two-photon polymerization for high-precision printing. We describe the design of several computational imaging prototype elements. We characterize these components, including surface topography, surface roughness, and angle of prism facets of the as-fabricated elements.

Atoms

Surmick, David M.; Dagel, Daryl D.; Parigger, Christian G.

Spatially resolved, line-of-sight measurements of aluminum monoxide emission spectra in laser ablation plasma are used with Abel inversion techniques to extract radial plasma temperatures. Contour mapping of the radially deconvolved signal intensity shows a ring of AlO formation near the plasma boundary with the ambient atmosphere. Simulations of the molecular spectra were coupled with the line profile fitting routines. Temperature results are presented with simultaneous inferences from lateral, asymmetric radial, and symmetric radial AlO spectral intensity profiles. This analysis indicates that shockwave phenomena in the radial profiles, including a temperature drop behind the blast wave created during plasma initiation were measured.

Kustas, Andrew K.; Susan, D.F.; Johnson, Kyle J.; Whetten, Shaun R.; Rodriguez, Mark A.; Dagel, Daryl D.; Michael, Joseph R.; Keicher, David K.; Argibay, Nicolas A.

Abstract not provided.

Jared, Bradley H.; Madison, Jonathan D.; Ivanoff, Thomas I.; Mitchell, John A.; Schwaller, Erich J.; Koepke, Joshua R.; Saiz, David J.; Dagel, Daryl D.; Brown-Shaklee, Harlan J.; Swiler, Laura P.

Abstract not provided.

Kustas, Andrew K.; Argibay, Nicolas A.; Chandross, M.; Whetten, Shaun R.; Keicher, Dave K.; Michael, Joseph R.; Susan, D.F.; Johnson, Kyle J.; Rodriguez, Mark A.; Dagel, Daryl D.; Wilson, Mark A.; Lu, Ping L.; Roach, R.A.

Abstract not provided.

Grine, Alejandro J.; Grine, Alejandro J.; Serkland, Darwin K.; Serkland, Darwin K.; Wood, Michael G.; Wood, Michael G.; Soudachanh, Amy L.; Soudachanh, Amy L.; Hollowell, Andrew E.; Hollowell, Andrew E.; Koch, Lawrence K.; Koch, Lawrence K.; Hains, Christopher H.; Hains, Christopher H.; Siddiqui, Aleem M.; Siddiqui, Aleem M.; Eichenfield, Matthew S.; Eichenfield, Matthew S.; Dagel, Daryl D.; Dagel, Daryl D.; Grossetete, Grant G.; Grossetete, Grant G.; Matins, Benjamin M.; Matins, Benjamin M.

Abstract not provided.

Additive Manufacturing

Kustas, Andrew K.; Susan, D.F.; Johnson, Kyle J.; Whetten, Shaun R.; Rodriguez, Mark A.; Dagel, Daryl D.; Michael, Joseph R.; Keicher, David M.; Argibay, Nicolas A.

Processing of the low workability Fe-Co-1.5V (Hiperco ® equivalent) alloy is demonstrated using the Laser Engineered Net Shaping (LENS) metals additive manufacturing technique. As an innovative and highly localized solidification process, LENS is shown to overcome workability issues that arise during conventional thermomechanical processing, enabling the production of bulk, near net-shape forms of the Fe-Co alloy. Bulk LENS structures appeared to be ductile with no significant macroscopic defects. Atomic ordering was evaluated and significantly reduced in as-built LENS specimens relative to an annealed condition, tailorable through selection of processing parameters. Fine equiaxed grain structures were observed in as-built specimens following solidification, which then evolved toward a highly heterogeneous bimodal grain structure after annealing. The microstructure evolution in Fe-Co is discussed in the context of classical solidification theory and selective grain boundary pinning processes. Magnetic properties were also assessed and shown to fall within the extremes of conventionally processed Hiperco ® alloys. Hiperco ® is a registered trademark of Carpenter Technologies, Readings, PA.

Additive Manufacturing

Stender, Michael S.; Beghini, Lauren L.; Sugar, Joshua D.; Veilleux, Michael V.; Subia, Samuel R.; Smith, Thale R.; San Marchi, Christopher W.; Brown, Arthur B.; Dagel, Daryl D.

This work proposes a finite element (FE) analysis workflow to simulate directed energy deposition (DED) additive manufacturing at a macroscopic length scale (i.e. part length scale) and to predict thermal conditions during manufacturing, as well as distortions, strength and residual stresses at the completion of manufacturing. The proposed analysis method incorporates a multi-step FE workflow to elucidate the thermal and mechanical responses in laser engineered net shaping (LENS) manufacturing. For each time step, a thermal element activation scheme captures the material deposition process. Then, activated elements and their associated geometry are analyzed first thermally for heat flow due to radiation, convection, and conduction, and then mechanically for the resulting stresses, displacements, and material property evolution. Simulations agree with experimentally measured in situ thermal measurements for simple cylindrical build geometries, as well as general trends of local hardness distribution and plastic strain accumulation (represented by relative distribution of geometrically necessary dislocations).

Sugar, Joshua D.; Stender, Michael S.; Beghini, Lauren L.; Subia, Samuel R.; Keicher, David M.; Dagel, Daryl D.; D'Elia, Chris D.; Hill, Mike H.; San Marchi, Christopher W.

Abstract not provided.

Kustas, Andrew K.; Susan, D.F.; Johnson, Kyle J.; Whetten, Shaun R.; Rodriguez, Mark A.; Dagel, Daryl D.; Michael, Joseph R.; Keicher, David M.; Roach, R.A.; Argibay, Nicolas A.

Abstract not provided.

Kustas, Andrew K.; Johnson, Kyle J.; Whetten, Shaun R.; Keicher, David M.; Rodriguez, Mark A.; Dagel, Daryl D.; Michael, Joseph R.; Argibay, Nicolas A.; Susan, D.F.

Abstract not provided.

Sugar, Joshua D.; Beghini, Lauren L.; Stender, Michael S.; Veilleux, Michael V.; Subia, Samuel R.; Keicher, David M.; Dagel, Daryl D.; Maguire, Michael C.; San Marchi, Christopher W.

Abstract not provided.

Sugar, Joshua D.; Beghini, Lauren L.; Stender, Michael S.; Veilleux, Michael V.; Keicher, David M.; Dagel, Daryl D.; Maguire, Michael C.; San Marchi, Christopher W.

Abstract not provided.