Publications

This paper defines a process for selecting dosimetry-quality cross sections. The recommended cross-section evaluation depends on screening high-quality evaluations with quantified uncertainties, down-selecting based on comparison to experiments in standard neutron fields, and consistency checking in reference neutron fields. This procedure is illustrated for the 23Na(n, γ)24 Na reaction.

Thermoluminescent dosimeters (TLDs), particularly CaF2:Mn, are often used as photon dosimeters in mixed (n/γ) field environments. In these mixed field environments, it is desirable to separate the photon response of a dosimeter from the neutron response. For passive dosimeters that measure an integral response, such as TLDs, the separation of the two components must be performed by postexperiment analysis because the TLD reading system cannot distinguish between photon- and neutron-produced response. Using a model of an aluminum-equilibrated TLD-400 (CaF2:Mn) chip, a systematic effort has been made to analytically determine the various components that contribute to the neutron response of a TLD reading. The calculations were performed for five measured reactor neutron spectra and one theoretical thermal neutron spectrum. The five measured reactor spectra all have experimental values for aluminum-equilibrated TLD-400 chips. Calculations were used to determine the percentage of the total TLD response produced by neutron interactions in the TLD and aluminum equilibrator. These calculations will aid the Sandia National Laboratories-Radiation Metrology Laboratory (SNL-RML) in the interpretation of the uncertainty for TLD dosimetry measurements in the mixed field environments produced by SNL reactor facilities.

A UV generation system consisting of a quasi-monolithic nonplanar-ring-oscillator image-rotating OPO, called the RISTRA OPO, is presented. High beam quality and the absence of mirror adjustments due to the monolithic design make this OPO well-suited for demanding applications such as satellite deployment. Initial tests of self seeding using low-quality flattop beams with poor spatial overlap between the OPO's cavity mode and the spatial mode of the injected signal pulsed showed pump depletion of 63%.

The decoding of received error control encoded bit streams is fairly straightforward when the channel encoding algorithms are efficient and known. But if the encoding scheme is unknown or part of the data is missing, how would one design a viable decoder for the received transmission? Communication engineers may not frequently encounter this situation, but for computational biologists this is an immediate challenge as we attempt to decipher and understand the vast amount of sequence data produced by genome sequencing projects. Assuming the systematic parity check block code model of protein translation initiation, this work presents an approach for determining the generator matrix given a set of potential codewords. The resulting generators and corresponding parity matrices are applied to valid and invalid Escherichia coli K-12 MG1655 messenger RNA leader sequences. The generators constructed using strict subsets of the 16S ribosomal RNA performed better than those constructed using the (5,2) block code model in earlier work.

The DIII-D research program is developing the scientific basis for advanced tokamak (AT) modes of operation in order to enhance the attractiveness of the tokamak as an energy producing system. Since the last international atomic energy agency (IAEA) meeting, we have made significant progress in developing the building blocks needed for AT operation: (1) we have doubled the magnetohydrodynamic (MHD) stable tokamak operating space through rotational stabilization of the resistive wall mode; (2) using this rotational stabilization, we have achieved {beta}{sub N}H{sub 89} {ge} 10 for 4{tau}{sub E} limited by the neoclassical tearing mode (NTM); (3) using real-time feedback of the electron cyclotron current drive (ECCD) location, we have stabilized the (m, n) = (3, 2) NTM and then increased {beta}{sub T} by 60%; (4) we have produced ECCD stabilization of the (2, 1) NTM in initial experiments; (5) we have made the first integrated AT demonstration discharges with current profile control using ECCD; (6) ECCD and electron cyclotron heating (ECH) have been used to control the pressure profile in high performance plasmas; and (7) we have demonstrated stationary tokamak operation for 6.5 s (36{tau}{sub E}) at the same fusion gain parameter of {beta}{sub N}H{sub 89}/q{sub 95}{sup 2} {approx_equal} as ITER but at much higher q{sub 95} = 4.2. We have developed general improvements applicable to conventional and AT operating modes: (1) we have an existence proof of a mode of tokamak operation, quiescent H-mode, which has no pulsed, edge localized modes (ELM) heat load to the divertor and which can run for long periods of time (3.8 s or 25{tau}{sub E}) with constant density and constant radiated power; (2) we have demonstrated real-time disruption detection and mitigation for vertical disruption events using high pressure gas jet injection of noble gases; (3) we have found that the heat and particle fluxes to the inner strike points of balanced, double-null divertors are much smaller than to the outer strike points. We have made detailed investigations of the edge pedestal and scrape-off layer (SOL): (1) atomic physics and plasma physics both play significant roles in setting the width of the edge density barrier in H-mode; (2) ELM heat flux conducted to the divertor decreases as density increases; (3) intermittent, bursty transport contributes to cross field particle transport in the SOL of H-mode and, especially, L-mode plasmas.

The Disturbed Rock Zone constitutes an important geomechanical element of the Waste Isolation Pilot Plant. The science and engineering underpinning the disturbed rock zone provide the basis for evaluating ongoing operational issues and their impact on performance assessment. Contemporary treatment of the disturbed rock zone applied to the evaluation of the panel closure system and to a new mining horizon improves the level of detail and quantitative elements associated with a damaged zone surrounding the repository openings. Technical advancement has been realized by virtue of ongoing experimental investigations and international collaboration. The initial portion of this document discusses the disturbed rock zone relative to operational issues pertaining to re-certification of the repository. The remaining sections summarize and document theoretical and experimental advances that quantify characteristics of the disturbed rock zone as applied to nuclear waste repositories in salt.

This report describes the complete revision of a deuterium equation of state (EOS) model published in 1972. It uses the same general approach as the 1972 EOS, i.e., the so-called 'chemical model,' but incorporates a number of theoretical advances that have taken place during the past thirty years. Three phases are included: a molecular solid, an atomic solid, and a fluid phase consisting of both molecular and atomic species. Ionization and the insulator-metal transition are also included. The most important improvements are in the liquid perturbation theory, the treatment of molecular vibrations and rotations, and the ionization equilibrium and mixture models. In addition, new experimental data and theoretical calculations are used to calibrate certain model parameters, notably the zero-Kelvin isotherms for the molecular and atomic solids, and the quantum corrections to the liquid phase. The report gives a general overview of the model, followed by detailed discussions of the most important theoretical issues and extensive comparisons with the many experimental data that have been obtained during the last thirty years. Questions about the validity of the chemical model are also considered. Implications for modeling the 'giant planets' are also discussed.

This report summarizes the development of new biocompatible self-assembly procedures enabling the immobilization of genetically engineered cells in a compact, self-sustaining, remotely addressable sensor platform. We used evaporation induced self-assembly (EISA) to immobilize cells within periodic silica nanostructures, characterized by unimodal pore sizes and pore connectivity, that can be patterned using ink-jet printing or photo patterning. We constructed cell lines for the expression of fluorescent proteins and induced reporter protein expression in immobilized cells. We investigated the role of the abiotic/biotic interface during cell-mediated self-assembly of synthetic materials.

This report documents work undertaken to endow the cognitive framework currently under development at Sandia National Laboratories with a human-like memory for specific life episodes. Capabilities have been demonstrated within the context of three separate problem areas. The first year of the project developed a capability whereby simulated robots were able to utilize a record of shared experience to perform surveillance of a building to detect a source of smoke. The second year focused on simulations of social interactions providing a queriable record of interactions such that a time series of events could be constructed and reconstructed. The third year addressed tools to promote desktop productivity, creating a capability to query episodic logs in real time allowing the model of a user to build on itself based on observations of the user's behavior.

Epetra is a package of classes for the construction and use of serial and distributed parallel linear algebra objects. It is one of the base packages in Trilinos. This document describes guidelines for Epetra coding style. The issues discussed here go beyond correct C++ syntax to address issues that make code more readable and self-consistent. The guidelines presented here are intended to aid current and future development of Epetra specifically. They reflect design decisions that were made in the early development stages of Epetra. Some of the guidelines are contrary to more commonly used conventions, but we choose to continue these practices for the purposes of self-consistency. These guidelines are intended to be complimentary to policies established in the Trilinos Developers Guide.

On October 22-24, 2003, about 40 experts involved in various aspects of homeland security from the United States and four other Pacific region countries meet in Kihei, Hawaii to engage in a free-wheeling discussion and brainstorm (a 'fest') of the role that technology could play in winning the war on terrorism in the Pacific region. The result of this exercise is a concise and relatively thorough definition of the terrorism problem in the Pacific region, emphasizing the issues unique to Island nations in the Pacific setting, along with an action plan for developing working demonstrators of advanced technological solutions to these issues. In this approach, the participants were asked to view the problem and their potential solutions from multiple perspectives, and then to identify barriers (especially social and policy barriers) to any proposed technological solution. The final step was to create a roadmap for further action. This roadmap includes plans to: (1) create a conceptual monitoring and tracking system for people and things moving around the region that would be 'scale free', and develop a simple concept demonstrator; (2) pursue the development of a system to improve local terrorism context information, perhaps through the creation of an information clearinghouse for Pacific law enforcement; (3) explore the implementation of a Hawaii based pilot system to explore hypothetical terrorist scenarios and the development of fusion and analysis tools to work with this data (Sandia); and (4) share information concerning the numerous activities ongoing at various organizations around the understanding and modeling of terrorist behavior.

The goal of this LDRD was to investigate III-antimonide/nitride based materials for unique semiconductor properties and applications. Previous to this study, lack of basic information concerning these alloys restricted their use in semiconductor devices. Long wavelength emission on GaAs substrates is of critical importance to telecommunication applications for cost reduction and integration into microsystems. Currently InGaAsN, on a GaAs substrate, is being commercially pursued for the important 1.3 micrometer dispersion minima of silica-glass optical fiber; due, in large part, to previous research at Sandia National Laboratories. However, InGaAsN has not shown great promise for 1.55 micrometer emission which is the low-loss window of single mode optical fiber used in transatlantic fiber. Other important applications for the antimonide/nitride based materials include the base junction of an HBT to reduce the operating voltage which is important for wireless communication links, and for improving the efficiency of a multijunction solar cell. We have undertaken the first comprehensive theoretical, experimental and device study of this material with promising results. Theoretical modeling has identified GaAsSbN to be a similar or potentially superior candidate to InGaAsN for long wavelength emission on GaAs. We have confirmed these predictions by producing emission out to 1.66 micrometers and have achieved edge emitting and VCSEL electroluminescence at 1.3 micrometers. We have also done the first study of the transport properties of this material including mobility, electron/hole mass, and exciton reduced mass. This study has increased the understanding of the III-antimonide/nitride materials enough to warrant consideration for all of the target device applications.

This report describes the research accomplishments achieved under the LDRD Project 'Radiation Hardened Optoelectronic Components for Space-Based Applications.' The aim of this LDRD has been to investigate the radiation hardness of vertical-cavity surface-emitting lasers (VCSELs) and photodiodes by looking at both the effects of total dose and of single-event upsets on the electrical and optical characteristics of VCSELs and photodiodes. These investigations were intended to provide guidance for the eventual integration of radiation hardened VCSELs and photodiodes with rad-hard driver and receiver electronics from an external vendor for space applications. During this one-year project, we have fabricated GaAs-based VCSELs and photodiodes, investigated ionization-induced transient effects due to high-energy protons, and measured the degradation of performance from both high-energy protons and neutrons.

This one-year feasibility study was aimed at developing finite element modeling capabilities for simulating nano-scale tests. This work focused on methods to model: (1) the adhesion of a particle to a substrate, and (2) the delamination of a thin film from a substrate. Adhesion was modeled as a normal attractive force that depends on the distance between opposing material surfaces while delamination simulations used a cohesive zone model. Both of these surface interaction models had been implemented in a beta version of the three-dimensional, transient dynamics, PRESTO finite element code, and the present study verified that implementation. Numerous illustrative calculations have been performed using these models, and when possible comparisons were made with existing solutions. These capabilities are now available in PRESTO version 1.07.

All ceramics and powder metals, including the ceramics components that Sandia uses in critical weapons components such as PZT voltage bars and current stacks, multi-layer ceramic MET's, ahmindmolybdenum & alumina cermets, and ZnO varistors, are manufactured by sintering. Sintering is a critical, possibly the most important, processing step during manufacturing of ceramics. The microstructural evolution, the macroscopic shrinkage, and shape distortions during sintering will control the engineering performance of the resulting ceramic component. Yet, modeling and prediction of sintering behavior is in its infancy, lagging far behind the other manufacturing models, such as powder synthesis and powder compaction models, and behind models that predict engineering properties and reliability. In this project, we developed a model that was capable of simulating microstructural evolution during sintering, providing constitutive equations for macroscale simulation of shrinkage and distortion during sintering. And we developed macroscale sintering simulation capability in JAS3D. The mesoscale model can simulate microstructural evolution in a complex powder compact of hundreds or even thousands of particles of arbitrary shape and size by 1. curvature-driven grain growth, 2. pore migration and coalescence by surface diffusion, 3. vacancy formation, grain boundary diffusion and annihilation. This model was validated by comparing predictions of the simulation to analytical predictions for simple geometries. The model was then used to simulate sintering in complex powder compacts. Sintering stress and materials viscous module were obtained from the simulations. These constitutive equations were then used by macroscopic simulations for simulating shrinkage and shape changes in FEM simulations. The continuum theory of sintering embodied in the constitutive description of Skorohod and Olevsky was combined with results from microstructure evolution simulations to model shrinkage and deformation during. The continuum portion is based on a finite element formulation that allows 3D components to be modeled using SNL's nonlinear large-deformation finite element code, JAS3D. This tool provides a capability to model sintering of complex three-dimensional components. The model was verified by comparing to simulations results published in the literature. The model was validated using experimental results from various laboratory experiments performed by Garino. In addition, the mesoscale simulations were used to study anisotropic shrinkage in aligned, elongated powder compacts. Anisotropic shrinkage occurred in all compacts with aligned, elongated particles. However, the direction of higher shrinkage was in some cases along the direction of elongation and in other cases in the perpendicular direction depending on the details of the powder compact. In compacts of simple-packed, mono-sized, elongated particles, shrinkage was higher in the direction of elongation. In compacts of close-packed, mono-sized, elongated particles and of elongated particles with a size and shape distribution, the shrinkage was lower in the direction of elongation. We also explored the concept of a sintering stress tensor rather than the traditional sintering stress scalar concept for the case of anisotropic shrinkage. A thermodynamic treatment of this is presented. A method to calculate the sintering stress tensor is also presented. A user-friendly code that can simulate microstructural evolution during sintering in 2D and in 3D was developed. This code can run on most UNIX platforms and has a motif-based GUI. The microstructural evolution is shown as the code is running and many of the microstructural features, such as grain size, pore size, the average grain boundary length (in 2D) and area (in 3D), etc. are measured and recorded as a function of time. The overall density as the function of time is also recorded.

The goal of this LDRD was to demonstrate the use of robotic vehicles for deploying and autonomously reconfiguring seismic and acoustic sensor arrays with high (centimeter) accuracy to obtain enhancement of our capability to locate and characterize remote targets. The capability to accurately place sensors and then retrieve and reconfigure them allows sensors to be placed in phased arrays in an initial monitoring configuration and then to be reconfigured in an array tuned to the specific frequencies and directions of the selected target. This report reviews the findings and accomplishments achieved during this three-year project. This project successfully demonstrated autonomous deployment and retrieval of a payload package with an accuracy of a few centimeters using differential global positioning system (GPS) signals. It developed an autonomous, multisensor, temporally aligned, radio-frequency communication and signal processing capability, and an array optimization algorithm, which was implemented on a digital signal processor (DSP). Additionally, the project converted the existing single-threaded, monolithic robotic vehicle control code into a multi-threaded, modular control architecture that enhances the reuse of control code in future projects.

In this paper, the effect of viscous wave motion on a micro rotational resonator is discussed. This work shows the inadequacy of developing theory to represent energy losses due to shear motion in air. Existing theory predicts Newtonian losses with little slip at the interface. Nevertheless, experiments showed less effect due to Newtonian losses and elevated levels of slip for small gaps. Values of damping were much less than expected. Novel closed form solutions for the response of components are presented. The stiffness of the resonator is derived using Castigliano's theorem, and viscous fluid motion above and below the resonator is derived using a wave approach. Analytical results are compared with experimental results to determine the utility of existing theory. It was found that existing macro and molecular theory is inadequate to describes measured responses.

Abstract not provided.

This report summarizes the Mentoring Program at Sandia National Laboratories (SNL), which has been an on-going success since its inception in 1995. The Mentoring Program provides a mechanism to develop a workforce able to respond to changing requirements and complex customer needs. The program objectives are to enhance employee contributions through increased knowledge of SNL culture, strategies, and programmatic direction. Mentoring is a proven mechanism for attracting new employees, retaining employees, and developing leadership. It helps to prevent the loss of corporate knowledge from attrition and retirement, and it increases the rate and level of contributions of new managers and employees, also spurring cross-organizational teaming. The Mentoring Program is structured as a one-year partnership between an experienced staff member or leader and a less experienced one. Mentors and mentees are paired according to mutual objectives and interests. Support is provided to the matched pairs from their management as well as division program coordinators in both New Mexico and California locations. In addition, bi-monthly large-group training sessions are held.

Large-scale finite element analysis often requires the iterative solution of equations with many unknowns. Preconditioners based on domain decomposition concepts have proven effective at accelerating the convergence of iterative methods like conjugate gradients for such problems. A study of two new domain decomposition preconditioners is presented here. The first is based on a substructuring approach and can viewed as a primal counterpart of the dual-primal variant of the finite element tearing and interconnecting method called FETI-DP. The second uses an algebraic approach to construct a coarse problem for a classic overlapping Schwarz method. The numerical properties of both preconditioners are shown to scale well with problem size. Although developed primarily for structural mechanics applications, the preconditioners are also useful for other problems types. Detailed descriptions of the two preconditioners along with numerical results are included.

Mobile wireless ad hoc networks that are resistant to adversarial manipulation are necessary for distributed systems used in military and security applications. Critical to the successful operation of these networks, which operate in the presence of adversarial stressors, are robust and efficient information assurance methods. In this report we describe necessary enhancements for a distributed certificate authority (CA) used in secure wireless network architectures. Necessary cryptographic algorithms used in distributed CAs are described and implementation enhancements of these algorithms in mobile wireless ad hoc networks are developed. The enhancements support a network's ability to detect compromised nodes and facilitate distributed CA services. We provide insights to the impacts the enhancements will have on network performance with timing diagrams and preliminary network simulation studies.

Sandia, Los Alamos, and Lawrence Livermore National Laboratories currently deploy high speed, Wide Area Network links to permit remote access to their Supercomputer systems. The current TCP congestion algorithm does not take full advantage of high delay, large bandwidth environments. This report involves evaluating alternative TCP congestion algorithms and comparing them with the currently used congestion algorithm. The goal was to find if an alternative algorithm could provide higher throughput with minimal impact on existing network traffic. The alternative congestion algorithms used were Scalable TCP and High-Speed TCP. Network lab experiments were run to record the performance of each algorithm under different network configurations. The network configurations used were back-to-back with no delay, back-to-back with a 30ms delay, and two-to-one with a 30ms delay. The performance of each algorithm was then compared to the existing TCP congestion algorithm to determine if an acceptable alternative had been found. Comparisons were made based on throughput, stability, and fairness.

As part of the Testing Evaluation and Qualification Project, which was contracted by Organization 9336, this paper compares three cubicle-class switches from various vendors to assess how well they would perform in the unclassified networks at Sandia National Laboratories. The switches tested were the SMC TigerSwitch 6709L2, the Cisco Catalyst 2950G-12, and the Extreme Summit 5i. Each switch was evaluated by testing performance, functionality, interoperability, security, and total cost of ownership. The results of this report show the SMC TigerSwitch as being the best choice for cubicle use because of its high performance and very low cost. The Cisco Catalyst is also rated highly for cubicle use and in some cases may be preferred over the SMC TigerSwitch. The Extreme Summit 5i is not recommended for cubicle use due to its size and extremely loud fans but is a full featured, high performance switch that would work very well for access layer switching.

The Unique Signal is a key constituent of Enhanced Nuclear Detonation Safety (ENDS). Although the Unique Signal approach is well prescribed and mathematically assured, there are numerous unsolved mathematical problems that could help assess the risk of deviations from the ideal approach. Some of the mathematics-based results shown in this report are: 1. The risk that two patterns with poor characteristics (easily generated by inadvertent processes) could be combined through exclusive-or mixing to generate an actual Unique Signal pattern has been investigated and found to be minimal (not significant when compared to the incompatibility metric of actual Unique Signal patterns used in nuclear weapons). 2. The risk of generating actual Unique Signal patterns with linear feedback shift registers is minimal, but the patterns in use are not as invulnerable to inadvertent generation by dependent processes as previously thought. 3. New methods of testing pair-wise incompatibility threats have resulted in no significant problems found for the set of Unique Signal patterns currently used. Any new patterns introduced would have to be carefully assessed for compatibility with existing patterns, since some new patterns under consideration were found to be deficient when associated with other patterns in use. 4. Markov models were shown to correspond to some of the engineered properties of Unique Signal sequences. This gives new support for the original design objectives. 5. Potential dependence among events (caused by a variety of communication protocols) has been studied. New evidence has been derived of the risk associated with combined communication of multiple events, and of the improvement in abnormal-environment safety that can be achieved through separate-event communication.

To model the telecommunications infrastructure and its role and robustness to shocks, we must characterize the business and engineering of telecommunications systems in the year 2003 and beyond. By analogy to environmental systems modeling, we seek to develop a 'conceptual model' for telecommunications. Here, the conceptual model is a list of high-level assumptions consistent with the economic and engineering architectures of telecommunications suppliers and customers, both today and in the near future. We describe the present engineering architectures of the most popular service offerings, and describe the supplier markets in some detail. We also develop a characterization of the customer base for telecommunications services and project its likely response to disruptions in service, base-lining such conjectures against observed behaviors during 9/11.