Publications

Results 1–25 of 39
Skip to search filters

Sierra/SolidMechanics 5.10 Verification Tests Manual

Bergel, Guy L.; Beckwith, Frank B.; Buche, Michael R.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Shelton, Timothy S.; Thomas, Jesse D.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document is a small portion of the tests that exist in the Sierra/SolidMechanics (Sierra/SM) verification test suite. Most of these tests are run nightly with the Sierra/SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra/SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra/SM Example Problems Manual. Note, many other verification tests exist in the Sierra/SM test suite, but have not yet been included in this manual.

More Details

Sierra/SolidMechanics 5.10 In-Development Manual

Bergel, Guy L.; Beckwith, Frank B.; Buche, Michael R.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

This user’s guide documents capabilities in Sierra/SolidMechanics which remain “in-development” and thus are not tested and hardened to the standards of capabilities listed in Sierra/SM 5.10 User’s Guide. Capabilities documented herein are available in Sierra/SM for experimental use only until their official release. These capabilities include, but are not limited to, novel discretization approaches such as the conforming reproducing kernel (CRK) method, numerical fracture and failure modeling aids such as the extended finite element method (XFEM) and J-integral, explicit time step control techniques, dynamic mesh rebalancing, as well as a variety of new material models and finite element formulations.

More Details

Sierra/SolidMechanics 5.10 Example Problems Manual

Bergel, Guy L.; Beckwith, Frank B.; Buche, Michael R.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document are tests that exist in the Sierra / SolidMechanics example problem suite, which is a subset of the Sierra / SM regression and performance test suite. These examples showcase common and advanced code capabilities. A wide variety of other regression and verification tests exist in the Sierra / SM test suite that are not included in this manual.

More Details

Sierra/SolidMechanics 5.10 Theory Manual

Beckwith, Frank B.; Bergel, Guy L.; de Frias, Gabriel J.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Parmar, Krishen J.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.; Manktelow, Kevin M.; Trageser, Jeremy T.

Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilities come closer to production level.

More Details

Sierra/SolidMechanics 5.8 User's Manual

Bergel, Guy L.; Beckwith, Frank B.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

Sierra/SolidMechanics (Sierra/SM) is a Lagrangian, three-dimensional code for finite element analysis of solids and structures. It provides capabilities for explicit dynamic, implicit quasistatic and dynamic analyses. The explicit dynamics capabilities allow for the efficient and robust solution of models with extensive contact subjected to large, suddenly applied loads. For implicit problems, Sierra/SM uses a multi-level iterative solver, which enables it to effectively solve problems with large deformations, nonlinear material behavior, and contact. Sierra/SM has a versatile library of continuum and structural elements, and a large library of material models. The code is written for parallel computing environments enabling scalable solutions of extremely large problems for both implicit and explicit analyses. It is built on the SIERRA Framework, which facilitates coupling with other SIERRA mechanics codes. This document describes the functionality and input syntax for Sierra/SM.

More Details

Sierra/SolidMechanics 5.8 In-Development Manual

Bergel, Guy L.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

This user’s guide documents capabilities in Sierra/SolidMechanics which remain “in-development” and thus are not tested and hardened to the standards of capabilities listed in Sierra/SM 5.8 User’s Guide. Capabilities documented herein are available in Sierra/SM for experimental use only until their official release. These capabilities include, but are not limited to, novel discretization approaches such as the conforming reproducing kernel (CRK) method, numerical fracture and failure modeling aids such as the extended finite element method (XFEM) and J-integral, explicit time step control techniques, dynamic mesh rebalancing, as well as a variety of new material models and finite element formulations.

More Details

Sierra/SolidMechanics 5.8 Theory Manual

Bergel, Guy L.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilities come closer to production level.

More Details

Sierra/SolidMechanics 5.8 Example Problems Manual

Bergel, Guy L.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document are tests that exist in the Sierra/SolidMechanics example problem suite, which is a subset of the Sierra/SM regression and performance test suite. These examples showcase common and advanced code capabilities. A wide variety of other regression and verification tests exist in the Sierra/SM test suite that are not included in this manual.

More Details

Sierra/SolidMechanics 5.8 Verification Tests Manual

Bergel, Guy L.; Beckwith, Frank B.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document is a small portion of the tests that exist in the Sierra/SolidMechanics (Sierra/SM) verification test suite. Most of these tests are run nightly with the Sierra/SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra/SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra/SM Example Problems Manual. Note, many other verification tests exist in the Sierra/SM test suite, but have not yet been included in this manual.

More Details

Sierra/SolidMechanics 5.6 User's Manual

Bergel, Guy L.; Beckwith, Frank B.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

Sierra/SolidMechanics (Sierra/SM) is a three-dimensional solid mechanics code with a versatile element library, nonlinear material models, large deformation capabilities, and contact. It is built on the SIERRA Framework. SIERRA provides a data management framework in a parallel computing environment that allows the addition of capabilities in a modular fashion. Contact capabilities are parallel and scalable. This document provides information about the functionality in Sierra/SM and the command structure required to access this functionality in a user input file. This document is divided into chapters based primarily on functionality. For example, the command structure related to the use of various element types is grouped in one chapter; descriptions of material models are grouped in another chapter. Sierra/SM provides both explicit transient dynamics and implicit quasistatics and dynamics capabilities. Both the explicit and implicit modules are highly scalable in a parallel computing environment. In the past, the explicit and implicit capabilities were provided by two separate codes, known as Presto and Adagio, respectively. These capabilities have been consolidated into a single code. The executable is named Adagio, but it provides the full suite of solid mechanics capabilities, for both implicit and explicit. The Presto executable has been disabled as a consequence of this consolidation.

More Details

Sierra/SolidMechanics 5.6 Example Problems Manual

Bergel, Guy L.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document are tests that exist in the Sierra/SolidMechanics example problem suite, which is a subset of the Sierra/SM regression and performance test suite. These examples showcase common and advanced code capabilities. A wide variety of other regression and verification tests exist in the Sierra/SM test suite that are not included in this manual.

More Details

Sierra/SolidMechanics 5.6 Theory Manual

Bergel, Guy L.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilities come closer to production level.

More Details

Sierra/SolidMechanics 5.6 Capabilities in Development

Bergel, Guy L.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

This user's guide documents capabilities in Sierra/SolidMechanics which remain "in-development" and thus are not tested and hardened to the standards of capabilities listed in Sierra/SM 5.6 User's Guide. Capabilities documented herein are available in Sierra/SM for experimental use only until their official release. These capabilities include, but are not limited to, novel discretization approaches such as the conforming reproducing kernel (CRK) method, numerical fracture and failure modeling aids such as the extended finite element method (XFEM) and J-integral, explicit time step control techniques, dynamic mesh rebalancing, as well as a variety of new material models and finite element formulations.

More Details

Sierra/SolidMechanics 5.6 Verification Tests Manual

Bergel, Guy L.; Beckwith, Frank B.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document is a small portion of the tests that exist in the Sierra / SolidMechanics (Sierra / SM) verfication test suite. Most of these tests are run nightly with the Sierra / SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra / SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This document can be used to confirm that a given code capability is verfied or referenced as a compilation of example problems. Additional example problems are provided in the Sierra / SM Example Problems Manual. Note, many other verfication tests exist in the Sierra / SM test suite, but have not yet been included in this manual.

More Details

Sierra/SolidMechanics 5.4 Verification Tests Manual

Bergel, Guy L.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Parmar, Krishen J.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Trageser, Jeremy T.; Treweek, Benjamin T.; Veilleux, Michael V.; Wagman, Ellen B.

Presented in this document is a small portion of the tests that exist in the Sierra/SolidMechanics (Sierra/SM) verification test suite. Most of these tests are run nightly with the Sierra/SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra/SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra/SM Example Problems Manual. Note, many other verification tests exist in the Sierra/SM test suite, but have not yet been included in this manual.

More Details

Embedded-Error Bayesian Calibration of Thermal Decomposition of Organic Materials

Journal of Verification, Validation and Uncertainty Quantification

Frankel, Ari L.; Wagman, Ellen B.; Keedy, Ryan M.; Houchens, Brent C.; Scott, Sarah N.

Organic materials are an attractive choice for structural components due to their light weight and versatility. However, because they decompose at low temperatures relative to traditional materials, they pose a safety risk due to fire and loss of structural integrity. To quantify this risk, analysts use chemical kinetics models to describe the material pyrolysis and oxidation using thermogravimetric analysis (TGA). This process requires the calibration of many model parameters to closely match experimental data. Previous efforts in this field have largely been limited to finding a single best-fit set of parameters even though the experimental data may be very noisy. Furthermore, the chemical kinetics models are often simplified representations of the true decomposition process. The simplification induces model-form errors that the fitting process cannot capture. In this work, we propose a methodology for calibrating decomposition models to TGA data that accounts for uncertainty in the model-form and experimental data simultaneously. The methodology is applied to the decomposition of a carbon fiber epoxy composite with a three-stage reaction network and Arrhenius kinetics. The results show a good overlap between the model predictions and TGA data. Uncertainty bounds capture deviations of the model from the data. The calibrated parameter distributions are also presented. The distributions may be used in forward propagation of uncertainty in models that leverage this material.

More Details

Sierra/SolidMechanics 5.2 User's Guide: Addendum for Shock Capabilities

Bergel, Guy L.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

This is an addendum to the Sierra/SolidMechanics 5.2 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export control requirements. The ITAR enhancements to Sierra/SM include material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. This document is an addendum only; the standard Sierra/SolidMechanics 5.2 User's Guide should be referenced for most general descriptions of code capability and use.

More Details

Sierra/SolidMechanics 5.2 User's Guide

Bergel, Guy L.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

Sierra/SolidMechanics (Sierra/SM) is a Lagrangian, three-dimensional code for finite element analysis of solids and structures. It provides capabilities for explicit dynamic, implicit quasistatic and dynamic analyses. The explicit dynamics capabilities allow for the efficient and robust solution of models with extensive contact subjected to large, suddenly applied loads. For implicit problems, Sierra/SM uses a multi-level iterative solver, which enables it to effectively solve problems with large deformations, nonlinear material behavior, and contact. Sierra/SM has a versatile library of continuum and structural elements, and a large library of material models. The code is written for parallel computing environments enabling scalable solutions of extremely large problems for both implicit and explicit analyses. It is built on the SIERRA Framework, which facilitates coupling with other SIERRA mechanics codes. This document describes the functionality and input syntax for Sierra/SM.

More Details

Sierra/SolidMechanics 5.2 Verification Tests Manual

Merewether, Mark T.; Shelton, Timothy S.; Beckwith, Frank B.; Veilleux, Michael V.; Tupek, Michael R.; Gampert, Scott G.; Manktelow, Kevin M.; de Frias, Gabriel J.; Mosby, Matthew D.; Plews, Julia A.; Wagman, Ellen B.; Bergel, Guy L.; Treweek, Benjamin T.; Miller, Scott T.; Thomas, Jesse D.

Presented in this document is a small portion of the tests that exist in the Sierra/SolidMechanics (Sierra / SM) verification test suite. Most of these tests are run nightly with the Sierra/SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra/SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra/SM Example Problems Manual. Note, many other verification tests exist in the Sierra/SM test suite, but have not yet been included in this manual.

More Details

Sierra/SolidMechanics 5.2 Example Problems Manual

Merewether, Mark T.; Shelton, Timothy S.; Beckwith, Frank B.; Veilleux, Michael V.; Tupek, Michael R.; Gampert, Scott G.; Manktelow, Kevin M.; de Frias, Gabriel J.; Mosby, Matthew D.; Plews, Julia A.; Wagman, Ellen B.; Bergel, Guy L.; Treweek, Benjamin T.; Miller, Scott T.; Thomas, Jesse D.

Presented in this document are tests that exist in the Sierra/SolidMechanics example problem suite, which is a subset of the Sierra/SM regression and performance test suite. These examples showcase common and advanced code capabilities. A wide variety of other regression and verification tests exist in the Sierra/SM test suite that are not included in this manual.

More Details

Sierra/SolidMechanics 5.2 Theory Manual

Beckwith, Frank B.; Guy, Donald W.; de Frias, Gabriel J.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Parmar, Krishen J.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.; Manktelow, Kevin M.

Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilities come closer to production level.

More Details

Sierra/SolidMechanics 5.2 Capabilities in Development

Bergel, Guy L.; Beckwith, Frank B.; Belcourt, Kenneth N.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Shelton, Timothy S.; Thomas, Jesse T.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

This user’s guide documents capabilities in Sierra/SolidMechanics which remain “in-development” and thus are not tested and hardened to the standards of capabilities listed in Sierra/SM 5.2 User’s Guide. Capabilities documented herein are available in Sierra/SM for experimental use only until their official release. These capabilities include, but are not limited to, novel discretization approaches such as the conforming reproducing kernel (CRK) method, numerical fracture and failure modeling aids such as the extended finite element method (XFEM) and J-integral, explicit time step control techniques, dynamic mesh rebalancing, as well as a variety of new material models and finite element formulations.

More Details

Sierra/SolidMechanics 5.0 User's Guide

Beckwith, Frank B.; Bergel, Guy L.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

Sierra/SolidMechanics (Sierra/SM) is a Lagrangian, three-dimensional code for finite element analysis of solids and structures. It provides capabilities for explicit dynamic, implicit quasistatic and dynamic analyses. The explicit dynamics capabilities allow for the efficient and robust solution of models with extensive contact subjected to large, suddenly applied loads. For implicit problems, Sierra/SM uses a multi-level iterative solver, which enables it to effectively solve problems with large deformations, nonlinear material behavior, and contact. Sierra/SM has a versatile library of continuum and structural elements, and a large library of material models. The code is written for parallel computing environments enabling scalable solutions of extremely large problems for both implicit and explicit analyses. It is built on the SIERRA Framework, which facilitates coupling with other SIERRA mechanics codes. This document describes the functionality and input syntax for Sierra/SM.

More Details

Sierra/SolidMechanics 5.0 Capabilities in Development

Beckwith, Frank B.; Bergel, Guy L.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

This user’s guide documents capabilities in Sierra/SolidMechanics which remain “in-development” and thus are not tested and hardened to the standards of capabilities listed in Sierra/SM 5.0 User’s Guide. Capabilities documented herein are available in Sierra/SM for experimental use only until their official release. These capabilities include, but are not limited to, novel discretization approaches such as peridynamics and the conforming reproducing kernel (CRK) method, numerical fracture and failure modeling aids such as the extended finite element method (XFEM) and $\textit{J}$-integral, explicit time step control techniques, dynamic mesh rebalancing, as well as a variety of new material models and finite element formulations.

More Details

Sierra/SolidMechanics 5.0 User's Guide Addendum for Shock Capabilities

Beckwith, Frank B.; Bergel, Guy L.; de Frias, Gabriel J.; Manktelow, Kevin M.; Merewether, Mark T.; Miller, Scott T.; Mosby, Matthew D.; Plews, Julia A.; Porter, V.L.; Shelton, Timothy S.; Thomas, Jesse D.; Treweek, Benjamin T.; Tupek, Michael R.; Veilleux, Michael V.; Wagman, Ellen B.

This is an addendum to the Sierra/SolidMechanics 5.0 User’s Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State’s International Traffic in Arms Regulations (ITAR) export control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export control requirements. The ITAR enhancements to Sierra/SM include material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. This document is an addendum only; the standard Sierra/SolidMechanics 5.0 User’s Guide should be referenced for most general descriptions of code capability and use.

More Details
Results 1–25 of 39
Results 1–25 of 39