Publications

Results 4101–4200 of 9,998

Search results

Jump to search filters

The Portals 4.1 Network Programming Interface

Barrett, Brian; Brightwell, Ronald B.; Grant, Ryan E.; Hemmert, Karl S.; Laros, James H.; Wheeler, Kyle; Underwood, Keith; Riesen, Rolf; Maccabe, Arthur B.; Hudson, Trammel

This report presents a specification for the Portals 4 networ k programming interface. Portals 4 is intended to allow scalable, high-performance network communication betwee n nodes of a parallel computing system. Portals 4 is well suited to massively parallel processing and embedded syste ms. Portals 4 represents an adaption of the data movement layer developed for massively parallel processing platfor ms, such as the 4500-node Intel TeraFLOPS machine. Sandia's Cplant cluster project motivated the development of Version 3.0, which was later extended to Version 3.3 as part of the Cray Red Storm machine and XT line. Version 4 is tar geted to the next generation of machines employing advanced network interface architectures that support enh anced offload capabilities.

More Details
TYPE SAND Report YEAR 2017
DOIOSTI

Quantum-Accurate Molecular Dynamics Potential for Tungsten

Wood, Mitchell A.; Thompson, Aidan P.

The purpose of this short contribution is to report on the development of a Spectral Neighbor Analysis Potential (SNAP) for tungsten. We have focused on the characterization of elastic and defect properties of the pure material in order to support molecular dynamics simulations of plasma-facing materials in fusion reactors. A parallel genetic algorithm approach was used to efficiently search for fitting parameters optimized against a large number of objective functions. In addition, we have shown that this many-body tungsten potential can be used in conjunction with a simple helium pair potential1 to produce accurate defect formation energies for the W-He binary system.

More Details
TYPE Other Report YEAR 2017
DOIOSTI

Modeling propellant-based stimulation of a borehole with peridynamics

International Journal of Rock Mechanics and Mining Sciences

Panchadhara, Rohan; Gordon, Peter A.; Parks, Michael L.

A non-local formulation of classical continuum mechanics theory known as peridynamics is used to study fracture initiation and growth from a wellbore penetrating the subsurface within the context of propellant-based stimulation. The principal objectives of this work are to analyze the influence of loading conditions on the resulting fracture pattern, to investigate the effect of in-situ stress anisotropy on fracture propagation, and to assess the suitability of peridynamics for modeling complex fracture formation. It is shown that the loading rate significantly influences the number and extent of fractures initiated from a borehole. Results show that low loading rates produce fewer but longer fractures, whereas high loading rates produce numerous shorter fractures around the borehole. The numerical method is able to predict fracture growth patterns over a wide range of loading and stress conditions. Our results also show that fracture growth is attenuated with increasing in-situ confining stress, and, in the case of confining stress anisotropy, fracture extensions are largest in the direction perpendicular to the minimum compressive stress. Since the results are in broad qualitative agreement with experimental and numerical studies found in the literature, suggesting that peridynamics can be a powerful tool in the study of complex fracture network formation.

More Details
TYPE Journal Article YEAR 2017
DOIOSTIScopus

High-throughput stochastic tensile performance of additively manufactured stainless steel

Journal of Materials Processing Technology

Boyce, Brad B.; Salzbrenner, Bradley S.; Rodelas, Jeffrey R.; Madison, Jonathan D.; Jared, Bradley H.; Swiler, Laura P.; Shen, Yu L.

An adage within the Additive Manufacturing (AM) community is that “complexity is free”. Complicated geometric features that normally drive manufacturing cost and limit design options are not typically problematic in AM. While geometric complexity is usually viewed from the perspective of part design, this advantage of AM also opens up new options in rapid, efficient material property evaluation and qualification. In the current work, an array of 100 miniature tensile bars are produced and tested for a comparable cost and in comparable time to a few conventional tensile bars. With this technique, it is possible to evaluate the stochastic nature of mechanical behavior. The current study focuses on stochastic yield strength, ultimate strength, and ductility as measured by strain at failure (elongation). However, this method can be used to capture the statistical nature of many mechanical properties including the full stress-strain constitutive response, elastic modulus, work hardening, and fracture toughness. Moreover, the technique could extend to strain-rate and temperature dependent behavior. As a proof of concept, the technique is demonstrated on a precipitation hardened stainless steel alloy, commonly known as 17-4PH, produced by two commercial AM vendors using a laser powder bed fusion process, also commonly known as selective laser melting. Using two different commercial powder bed platforms, the vendors produced material that exhibited slightly lower strength and markedly lower ductility compared to wrought sheet. Moreover, the properties were much less repeatable in the AM materials as analyzed in the context of a Weibull distribution, and the properties did not consistently meet minimum allowable requirements for the alloy as established by AMS. The diminished, stochastic properties were examined in the context of major contributing factors such as surface roughness and internal lack-of-fusion porosity. This high-throughput capability is expected to be useful for follow-on extensive parametric studies of factors that affect the statistical reliability of AM components.

More Details
TYPE Journal Article YEAR 2017
DOIOSTIScopus

High Performance Computing - Power Application Programming Interface Specification Version 2.0

Laros, James H.; Grant, Ryan E.; Levenhagen, Michael J.; Olivier, Stephen L.; Laros, James H.; Ward, Harry L.; Younge, Andrew J.

Measuring and controlling the power and energy consumption of high performance computing systems by various components in the software stack is an active research area. Implementations in lower level software layers are beginning to emerge in some production systems, which is very welcome. To be most effective, a portable interface to measurement and control features would significantly facilitate participation by all levels of the software stack. We present a proposal for a standard power Application Programming Interface (API) that endeavors to cover the entire software space, from generic hardware interfaces to the input from the computer facility manager.

More Details
TYPE SAND Report YEAR 2017
DOIOSTI

Efficient Gate Set Tomography on a Multi-Qubit Superconducting Processor

Nielsen, Erik N.; Rudinger, Kenneth M.; Blume-Kohout, Robin J.; Bestwick, Andrew; Bloom, Benjamin; Block, Maxwell; Caldwell, Shane M.; Curtis, Michael J.; Hudson, Alex; Orgiazzi, Jean-Luc; Papageorge, Alexander; Polloreno, Anthony; Reagor, Matt; Rubin, Nicholas; Scheer, Michael; Selvanayagam, Michael; Sete, Eyob; Sinclair, Rodney; Smith, Robert; Vahidpour, Mehrnoosh; Villiers, Marius; Zeng, William J.; Rigetti, Chad

Abstract not provided.

More Details
TYPE Conference Poster YEAR 2017
OSTIOSTI
Results 4101–4200 of 9,998
Results 4101–4200 of 9,998