Publications

Abstract not provided.

Distribution and transmission protection systems are considered vital parts of modern smart grid ecosystems due to their ability to isolate faulted segments and preserve the operation of critical loads. Current protection schemes increasingly utilize cognitive methods to proactively modify their actions according to extreme power system changes. However, the effectiveness and robustness of these information-driven solutions rely entirely on the integrity, authenticity, and confidentiality of the data and control signals exchanged on the underlying relay communication networks. In this paper, we outline a scalable adaptive protection platform for distribution systems, and introduce a novel blockchain-based distributed network architecture to enhance data exchange security among the smart grid protection relays. The proposed mechanism utilizes a tiered blockchain architecture to counter the current technology limitations providing low latency with better scalability. The decentralized nature removes singular points of failure or contamination, enabling direct secure communication between smart grid relays. We also present a security analysis that demonstrates how the proposed framework prohibits any alterations on the blockchain ledger providing integrity and authenticity of the exchanged data (e.g., realtime measurements/relay settings). Finally, the performance of the proposed approach is evaluated through simulation on a blockchain benchmarking framework with the results demonstrating a promising solution for secure smart grid protection system communication.

Distribution system modelling and analysis with growing penetration of distributed energy resources (DERs) requires more detailed and accurate distribution load modelling. Smart meters, DER monitors, and other distribution system sensors provide a new level of visibility to distribution system loads and DERs. However, there is a limited understanding of how to efficiently leverage the new information in distribution system load modelling. This study presents the assessment of 11 methods to leverage the emerging information for improved distribution system active and reactive power load modelling. The accuracy of these load modelling methods is assessed both at the primary and the secondary distribution levels by analysing over 2.7 billion data points of results of feeder node voltages and element phase currents obtained by performing annual quasi-static time series simulations on EPRI's Ckt5 feeder model.

The energy grid becomes more complex with increasing penetration of renewable resources, distributed energy storage, distributed generators, and more diverse loads such as electric vehicle charging stations. The presence of distributed energy resources (DERs) requires directional protection due to the added potential for energy to flow in both directions down the line. Additionally, contingency requirements for critical loads within a microgrid may result in looped or meshed systems. Computation speeds of iterative methods required to coordinate loops are improved by starting with a minimum breakpoint set (MBPS) of relays. A breakpoint set (BPS) is a set of breakers such that, when opened, breaks all loops in a mesh grid creating a radial system. A MBPS is a BPS that consists of the minimum possible number of relays required to accomplish this goal. In this paper, a method is proposed in which a minimum spanning tree is computed to indirectly break all loops in the system, and a set difference is used to identify the MBPS. The proposed method is found to minimize the cardinality of the BPS to achieve a MBPS.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Timeseries power and voltage data recorded by electricity smart meters in the US have been shown to provide immense value to utilities when coupled with advanced analytics. However, Advanced Metering Infrastructure (AMI) has diverse characteristics depending on the utility implementing the meters. Currently, there are no specific guidelines for the parameters of data collection, such as measurement interval, that are considered optimal, and this continues to be an active area of research. This paper aims to review different grid edge, delay tolerant algorithms using AMI data and to identify the minimum granularity and type of data required to apply these algorithms to improve distribution system models. The primary focus of this report is on distribution system secondary circuit topology and parameter estimation (DSPE).

Accurate distribution secondary low-voltage circuit models are needed to enhance overall distribution system operations and planning, including effective monitoring and coordination of distributed energy resources located in the secondary circuits. We present a full-scale demonstration across three real feeders of a computationally efficient approach for estimating the secondary circuit topologies and parameters using historical voltage and power measurements provided by smart meters. The method is validated against several secondary configurations, and compares favorably to satellite imagery and the utility secondary model. Feeder-wide results show how much parameters can vary from simple assumptions. Model sensitivities are tested, demonstrating only modest amounts of data and resolutions of data measurements are needed for accurate parameter and topology results.

Abstract not provided.

Successful system protection is critical to the performance of the DC microgrid system. This paper proposes an adaptive droop based fault current control for a standalone low voltage (LV) solar-photovoltaic (PV) based DC microgrid protection. In the proposed method, a DC microgrid fault is detected by the current and voltage thresholds. Generally, the droop method is used to control the power sharing between the converters by controlling the reference voltage. In this paper, this scheme is extended to control the fault current by calculating an adaptive virtual resistance Rdroop, and to control the converter output reference voltage. This effectively controls the converter pulse width, and reduces the flow of source current from a particular converter which helps to increase the fault clearing time. Additionally, a trip signal is sent to the corresponding DC circuit breaker (DCCB), to isolate the faulted converter, feeder or a DC bus. The design procedure is detailed, and the effectiveness of proposed method is verified by simulation analysis.

Distribution system analysis requires yearlong quasi-static time-series (QSTS) simulations to accurately capture the variability introduced by high penetrations of distributed energy resources (DER) such as residential and commercial-scale photovoltaic (PV) installations. Numerous methods are available that significantly reduce the computational time needed for QSTS simulations while maintaining accuracy. However, analyzing the results remains a challenge; a typical QSTS simulation generates millions of data points that contain critical information about the circuit and its components. This paper provides examples of visualization methods to facilitate the analysis of QSTS results and to highlight various characteristics of circuits with high variability.

Abstract not provided.

The Ideal Transformer Method (ITM) and the Damping Impedance Method (DIM) are the most widely used techniques for connecting power equipment to a Power-Hardware-in-the-Loop (PHIL) real-time simulation. Both methods have been studied for their stability and accuracy in PHIL simulations, but neither have been analyzed when the hardware is providing grid-support services with volt-var, frequency-watt, and fixed power factor functions. In this work, we experimentally validate the two methods of connecting a physical PV inverter to a PHIL system and evaluate them for dynamic stability and accuracy when operating with grid-support functions. It was found that the DIM Low Pass Lead Filter (LPF LD) method was the best under unity and negative power factor conditions, but the ITM LPF LD method was preferred under positive power factor conditions.

Abstract not provided.

Abstract not provided.

Spectral clustering is applied to the problem of phase identification of electric customers to investigate the data needs (resolution and accuracy) of advanced metering infrastructure (AMI). More accurate models are required to accurately interconnect high penetrations of PV/DER and for optimal electric grid operations. This paper demonstrates the effects of different data collection implementations and common errors in AMI datasets on the phase identification task. This includes measurement intervals, data resolution, collection periods, time synchronization issues, noisy measurements, biased meters, and mislabeled phases. High quality AMI data is a critical consideration to model correction and accurate hosting capacity analyses.

The Ideal Transformer Method (ITM) and the Damping Impedance Method (DIM) are the most widely used techniques for connecting power equipment to a Power-Hardware-in-the-Loop (PHIL) real-time simulation. Both methods have been studied for their stability and accuracy in PHIL simulations, but neither have been analyzed when the hardware is providing grid-support services with volt-var, frequency-watt, and fixed power factor functions. In this work, we experimentally validate the two methods of connecting a physical PV inverter to a PHIL system and evaluate them for dynamic stability and accuracy when operating with grid-support functions. It was found that the DIM Low Pass Lead Filter (LPF LD) method was the best under unity and negative power factor conditions, but the ITM LPF LD method was preferred under positive power factor conditions.

This paper discusses common types of errors that are frequently present in utility distribution system models and which can significantly influence distribution planning and operational assessments that rely on the model accuracy. Based on Google Earth imagery and analysis of correlation coefficients, this paper also illustrates some common error types and demonstrates methods to correct the errors. Error types include misla-beled interconnections between customers and service transformers, three-phase customers labeled as single-phase, unmarked transformers, and customers lacking coordinates. Identifying and correcting for these errors is critical for accurate distribution planning and operational assessments, such as load flow and hosting capacity analysis.

Power outages are a challenge that utility companies must face, with the potential to affect millions of customers and cost billions in damage. For this reason, there is a need for developing approaches that help understand the effects of fault conditions on the power grid. In distribution circuits with high renewable penetrations, the fault currents from DER equipment can impact coordinated protection scheme implementations so it is critical to accurately analyze fault contributions from DER systems. To do this, MATLAB/Simulink/RT-Labs was used to simulate the reduced-order distribution system and three different faults are applied at three different bus locations in the distribution system. The use of Real-Time (RT) Power Hardware-in-the-Loop (PHIL) simulations was also used to further improve the fidelity of the model. A comparison between OpenDSS simulation results and the Opal-RT experimental fault currents was conducted to determine the steady-state and dynamic accuracy of each method as well as the response of using simulated and hardware PV inverters. It was found that all methods were closely correlated in steady-state, but the transient response of the inverter was difficult to capture with a PV model and the physical device behavior could not be represented completely without incorporating it through PHIL.

Power outages are a challenge that utility companies must face, with the potential to affect millions of customers and cost billions in damage. For this reason, there is a need for developing approaches that help understand the effects of fault conditions on the power grid. In distribution circuits with high renewable penetrations, the fault currents from DER equipment can impact coordinated protection scheme implementations so it is critical to accurately analyze fault contributions from DER systems. To do this, MATLAB/Simulink/RT-Labs was used to simulate the reduced-order distribution system and three different faults are applied at three different bus locations in the distribution system. The use of Real-Time (RT) Power Hardware-in-the-Loop (PHIL) simulations was also used to further improve the fidelity of the model. A comparison between OpenDSS simulation results and the Opal-RT experimental fault currents was conducted to determine the steady-state and dynamic accuracy of each method as well as the response of using simulated and hardware PV inverters. It was found that all methods were closely correlated in steady-state, but the transient response of the inverter was difficult to capture with a PV model and the physical device behavior could not be represented completely without incorporating it through PHIL.

Distribution system analysis requires yearlong quasi-static time-series (QSTS) simulations to accurately capture the variability introduced by high penetrations of distributed energy resources (DER) such as residential and commercial-scale photovoltaic (PV) installations. Numerous methods are available that significantly reduce the computational time needed for QSTS simulations while maintaining accuracy. However, analyzing the results remains a challenge; a typical QSTS simulation generates millions of data points that contain critical information about the circuit and its components. This paper provides examples of visualization methods to facilitate the analysis of QSTS results and to highlight various characteristics of circuits with high variability.

Quasi-static time-series (QSTS) analysis of distribution systems can provide critical information about the potential impacts of high penetrations of distributed and renewable resources, like solar photovoltaic systems. However, running high-resolution yearlong QSTS simulations of large distribution feeders can be prohibitively burdensome due to long computation times. Temporal parallelization of QSTS simulations is one possible solution to overcome this obstacle. QSTS simulations can be divided into multiple sections, e.g. into four equal parts of the year, and solved simultaneously with parallel computing. The challenge is that each time the simulation is divided, error is introduced. This paper presents various initialization methods for reducing the error associated with temporal parallelization of QSTS simulations and characterizes performance across multiple distribution circuits and several different computers with varying architectures.

Quasi-static time-series (QSTS) analysis of distribution systems can provide critical information about the potential impacts of high penetrations of distributed and renewable resources, like solar photovoltaic systems. However, running high-resolution yearlong QSTS simulations of large distribution feeders can be prohibitively burdensome due to long computation times. Temporal parallelization of QSTS simulations is one possible solution to overcome this obstacle. QSTS simulations can be divided into multiple sections, e.g. into four equal parts of the year, and solved simultaneously with parallel computing. The challenge is that each time the simulation is divided, error is introduced. This paper presents various initialization methods for reducing the error associated with temporal parallelization of QSTS simulations and characterizes performance across multiple distribution circuits and several different computers with varying architectures.

Historically, photovoltaic inverters have been grid-following controlled, but with increasing penetrations of inverter-based generation on the grid, grid-forming inverters (GFMI) are gaining interest. GFMIs can also be used in microgrids that require the ability to interact and operate with the grid (grid-tied), or to operate autonomously (islanded) while supplying their corresponding loads. This approach can substantially improve the response of the grid to severe contingencies such as hurricanes, or to high load demands. During islanded conditions, GFMIs play an important role on dictating the system's voltage and frequency the same way as synchronous generators do in large interconnected systems. For this reason, it is important to understand the behavior of such grid-forming inverters under fault scenarios. This paper focuses on testing different commercially available grid-forming inverters under fault conditions.