Publications

Abstract not provided.

Laser Engineered Net Shaping (LENS) is a novel manufacturing process for fabricating metal parts directly from Computer Aided Design (CAD) solid models. The process is similar to rapid prototyping technologies in its approach to fabricate a solid component by layer additive methods. However, the LENS technology is unique in that fully dense metal components with material properties that are similar to that of wrought materials can be fabricated. The LENS process has the potential to dramatically reduce the time and cost required realizing functional metal parts. In addition, the process can fabricate complex internal features not possible using existing manufacturing processes. The real promise of the technology is the potential to manipulate the material fabrication and properties through precision deposition of the material, which includes thermal behavior control, layered or graded deposition of multi-materials, and process parameter selection. This paper describes the authors' research to understand solidification aspects, thermal behavior, and material properties for laser metal deposition technologies.

This report summarizes materials issues associated with advanced micromachines development at Sandia. The intent of this report is to provide a perspective on the scope of the issues and suggest future technical directions, with a focus on computational materials science. Materials issues in surface micromachining (SMM), Lithographic-Galvanoformung-Abformung (LIGA: lithography, electrodeposition, and molding), and meso-machining technologies were identified. Each individual issue was assessed in four categories: degree of basic understanding; amount of existing experimental data capability of existing models; and, based on the perspective of component developers, the importance of the issue to be resolved. Three broad requirements for micromachines emerged from this process. They are: (1) tribological behavior, including stiction, friction, wear, and the use of surface treatments to control these, (2) mechanical behavior at microscale, including elasticity, plasticity, and the effect of microstructural features on mechanical strength, and (3) degradation of tribological and mechanical properties in normal (including aging), abnormal and hostile environments. Resolving all the identified critical issues requires a significant cooperative and complementary effort between computational and experimental programs. The breadth of this work is greater than any single program is likely to support. This report should serve as a guide to plan micromachines development at Sandia.

Direct metal deposition technologies produce complex, near net shape components from Computer Aided Design (CAD) solid models. Most of these techniques fabricate a component by melting powder in a laser weld pool, rastering the weld bead to form a layer, and additively constructing subsequent layers. This report will describe anew direct metal deposition process, known as WireFeed, whereby a small diameter wire is used instead of powder as the feed material to fabricate components. Currently, parts are being fabricated from stainless steel alloys. Microscopy studies show the WireFeed parts to be filly dense with fine microstructural features. Mechanical tests show stainless steel parts to have high strength values with retained ductility. A model was developed to simulate the microstructural evolution and coarsening during the WireFeed process. Simulations demonstrate the importance of knowing the temperature distribution during fabrication of a WireFeed part. The temperature distribution influences microstructural evolution and, therefore, must be controlled to tailor the microstructure for optimal performance.

Laser Engineered Net Shaping, also known as LENS{trademark}, is an advanced manufacturing technique used to fabricate near-net shaped, fully dense metal components directly from computer solid models without the use of traditional machining processes. The LENS{trademark} process uses a high powered laser to create a molten pool into which powdered metal is injected and solidified. Like many SFF techniques, LENS{trademark} parts are made through a layer additive process. In the current system, for any given layer, the laser is held stationary, while the part and its associated substrate is moved, allowing for the each layer`s geometry to be formed. Individual layers are generated by tracing out the desired border, followed by filling in the remaining volume. Recent research into LENS{trademark} has highlighted the sensitivity of the processes to multiple software controllable parameters such as substrate travel velocity, border representation, and fill patterns. This research is aimed at determining optimal border outlines and fill patterns for LENS{trademark} and at developing the associated software necessary for automating the creation of the desired motion control.