Publications

Although the feasibility of using PZT and PLZT films for optical data processing applications, such as optical storage disks, image comparators, and spatial light modulators, has clearly been established, most of the critical parameters related to the storage and readout processes still need to be evaluated. Optical readout techniques capable of nondestructively determining the value of polarization are based either on the quadratic electrooptic effect or on a photocurrent response. In reflection, large electrooptic retardations (>60{degrees}) have now been achieved with thin PZT films ({approx equal} 0.5 {mu}m) under conditions that optimize interference effects. These results are quite attractive for device applications. Model calculations, based on the equations of reflection ellipsometry, have been used to develop a framework for understanding those results. The magnitude of the photocurrent response has also been used to determine the polarization state. However, the photocurrent always has the same sign, regardless of the sign of the polarization, which suggests the presence of a strong bias field due to at least one of the interfaces. In addition, the accumulation of space charge after a succession of measurements suppresses the photocurrent transient, which severely limits the utility of a photocurrent based readout. 7 refs., 9 figs.

The contact of aluminum-based melts with liquid water has been shown to be explosive in many experiments performed by the aluminum industry and in several nuclear reactor experiments and accidents. In order to obtain quantitative information relating to the fuel-coolant interactions that might occur with aluminum-based fuel, a laboratory-scale experimental study is being performed at Sandia National Laboratories. The overall objective of this research program is to provide an understanding of the mechanism of steam explosions with the melt compositions expected in several hypothetical core meltdown accident scenarios in production reactors. In this program it has been demonstrated that rapid exothermic metal-water reactions can accompany the steam explosions under certain conditions resulting in enhanced energy release and in the concomitant generation of hydrogen. 4 refs., 2 figs.

The INTEROP Achievement Award will be given to those customer organizations that make the most effective use of internetworking technology to further their own specific business aims. This paper is an application for this award by Sandia National Laboratories. Given are the network application, topology, and the types of systems to which it is applied.(JEF)

One problem with electromagnetic time domain finite-difference simulations in cylindrical coordinates is the rapidly decreasing characteristic dimension of the cells as r approaches zero. In order to satisfy the Courant stability condition a small time step is needed to insure stability, which is undesirable because it increases the cost of the simulation. In our presentation, we will describe a method which uses a rectangular grid and an annular cylindrical grid which overlap to perform electromagnetic simulations of cylindrical geometries. The two grids are connected by interpolating the field at the grid points of one grid using field values from the second grid. 2 refs.

Short communication.

The strength of deuterium bonding to the walls of closed cavities within Si was determined in ion-beam experiments. These studies circumvented an inherent indeterminacy in the analysis of external-surface desorption and thereby allowed the Si-H surface bond energy to be quantified for the first time. The bond energy is 2.5 {plus minus} 0.2 eV for submonolayer coverages. 14 refs., 3 figs.

Scan path testing and debugging offers a structured, proven way to debug and test arbitrarily complex electronic systems. The interface and equipment requirements are far lower than traditional debug and test techniques. The system is also completely testable even when physically remote from the lab where it was originally developed. This report describes our experience using scan techniques to debug the EPSILON-2 processor board, a system with over 300 ICs and over 2500 independently controllable and observable test points. The debug time of the circuit was greatly reduced by the adoption of scan path methodology. The use of expensive test equipment was drastically reduced, and the level of control of the circuitry increased. We have run tests on the processor from physically remote sites. Our experiences are described, and the adoption of scan path techniques is shown to be simple enough that it should be useful in all electronic projects. 8 refs., 12 figs.

Sandia National Laboratories is a large multi-program DOE laboratory. The Recorded Information Management Division (RIM) has an expanding mission to meet Sandia's needs for cost-effective management in information from creation to final disposition in accordance with applicable regulations and requirements. An analysis based on the need to meet requirements and to improve business practice was successful in convincing management to allocate increased resources to the RIM Compliance Project.

Historically, the electronics industry has always attempted to increase the speed of electronic components and decrease the size of electronic assemblies by developing and manufacturing smaller and faster basic level components (e.g., integrated circuits). However, it is now becoming apparent that the next significant advancement in electronic assembly size and speed may come not as a result of smaller and faster devices, but rather as a consequence of smaller and more closely spaced packages. This increased packaging density will occur at early levels of assembly as industry moves towards multichip modules. It will also occur at later packaging steps as industry continues to expand the use of surface mount technology (SMT) and mixed mounting technology (through hole attachment as well as SMT on one circuit board). Furthermore, there will be an increased propensity to use higher packaging density on printed wiring boards (PWB) and to place more PWB's in a given volume at yet the next level of packaging. One class of materials on which this advanced packaging technology will place severe new demands will be the alloys used to join assemblies and subassemblies (e.g. solders and brazes). These materials will be taxed both from the perspective of enhanced manufacturability as well as greater in-service robustness. It is the objective of this paper, through the use of selected case studies, to illustrate how advanced microstructural characterization techniques can be used to improve packaging technology. The specific case studies discussed are: (1) Microstructural Characterization of Solders, (2) Microstructural Characterization of Solder Joint Embrittlement of Leaded, Surface Mount Transistors (3) Microstructural Characterization of Metal/Ceramic Brazes in Electronic Applications, and (4) Microstructural Characterization of Direct Brazing of Graphite to Copper. 25 refs., 16 figs.

A number of models that predict the impulse generated in solid targets by short high-intensity radiation loads are described. It is shown that the impulse is insensitive to the details of the energy deposition and interaction processes. Thus with the proper nondimensionalization and normalization, all the models are known to be very nearly equivalent. 5 refs., 5 figs., 1 tab.

The radiation produced by a 15.5-MeV monoenergetic electron beam incident on optimized and nonoptimized bremsstrahlung targets is characterized using the ITS Monte Carlo code and measurements with equilibrated and non-equilibrated TLD dosimetry. Comparisons between calculations and measurements verify the calculations and demonstrate that the code can be used to predict both bremsstrahlung production and TLD response for radiation fields that are characteristic of those produced by pulsed simulators of gamma rays. At optimum bremsstrahlung production, the predicted total forward radiation fluence detected in equilibrated TLD dosimetry agrees with that measured within the {plus minus}6% uncertainty of the measurement. The absolute comparisons made here provide independent confirmation of the validity of the TLD calibration for photon fields characteristic of gamma-ray simulators. The empirical Martin equation, which is often used to calculate radiation dose from optimized bremsstrahlung targets, is examined, and its range of validity is established from the data presented. 23 refs., 11 figs., 2 tabs.

Acoustic emissions and conventional strain measurements were used to follow the evolution of the damage surface and the plastic potential in a limestone under conditions of triaxial compressions. Confining pressures were chosen such that macroscopically, the limestone exhibited both brittle and ductile behavior. The parameters thus derived are useful for modeling the deformation of a pressure-dependent material and for computing when localization would occur. 10 refs., 8 figs.

The Gaseous Electronics Conference (GEC) RF Reference Cell was developed to enhance studies of radiofrequency (rf) discharge systems analogous to those used to fabricate microelectronic devices. The Reference Cell concept includes both a standard discharge-chamber design and a set of diagnostic tools that can be used to verify that different Cells behave similarly. Voltage and current measurements in Reference Cells in the United States show that, with proper care, plasmas that behave in a similar manner can be generated in different Cells. The versatility of the Reference Cell is illustrated by results on the use of planar laser-induced fluorescence imaging to obtain two-dimensional spatial profiles of SO{sub 2} in an SF{sub 6}/O{sub 2} rf discharge. 4 refs., 5 figs.

We have used the highly sensitive technique of Photothermal Deflection Spectroscopy (PDS) to measure changes in the infrared absorption spectra of MEHPPV, P3HT and Polydiacetylene-4BCMU induced by pumping these polymers with light above the {pi}--{pi}* transition energy. In contrast to previous chopped light transmission measurements of these effects, the PDS technique can directly measure the buildup or decay of the absorption coefficient, {alpha}, on the time scale of second to days. In the case of MEHPPV we observe that the time scale of seconds to days. In the case of MEHPPV we observe that above-gap light causes the appearance of a broad infrared peak in {alpha}, which continues to grow-in hours after the pump light is first applied. For this polymer the general shape of the absorption spectra in the unpumped state mimics the photo-induced changes, suggesting that remnant photo-induced states determine the maximum transparency observed under normal experimental conditions. For P3HT and to a lesser extent, MEHPPV, we also observe irreversible photo-induced absorption components which we tentatively identify with photo-induced oxidation of the polymer matrix. 10 refs., 8 figs.

Present practice in most computer codes intended for the solution of dynamic mechanics problems is to use the classical infinitesimal plasticity relations together with the Jaumann stress rate to account for finite rotations. Use of the Jaumann stress rate is known to lead to oscillating stress-strain response in simple shear at large deformations for elastic and some plastic relations, and is limited to isotropic material descriptions. Formulations of finite deformation plasticity based on the Lagrangian reference configuration and an unrotated configuration have been proposed which, in principle, should overcome these limitations. The latter has been implemented in a finite element computer code. In this paper, it is shown how a Lagrangian description based on the reference configuration may be implemented in computer codes, and how it may be translated into a corresponding Eulerian description based on the current configuration and a description based on the unrotated configuration for comparison with currently used descriptions. 11 refs.

This paper presents information on measures taken by Sandia National Laboratories to prepare for environmental, safety, and health compliance assessments conducted by Tiger Teams'' at Department of Energy facilities.

Woven Kevlar fabrics exhibit a number of beneficial mechanical properties which include strength, flexibility, and relatively low density. The desire to engineer or design Kevlar fabrics for specific applications has stimulated interest in the development of theoretical models which relate their effective mechanical properties to specific aspects of the fabric morphology and microstructure. In this work the author provides a theoretical investigation of the large deformation elastic response of a plane woven Kevlar fabric and compares these theoretical results with experimental data obtained from uniaxially loaded Kevlar fabrics. The theoretical analysis assumes the woven fabric to be a regular network of orthogonal interlaced yarns and the individual yarns are modeled as extensible elastica, thus coupling stretching and bending effects at the outset. This comparison of experiment with theory indicates that the deformation of woven fabric can be quite accurately predicted by modeling the individual yarns as extensible elastica. 2 refs., 1 fig.

The Modular Integrated Video System (MIVS) Image Processing System (MIPS) was developed to assist the International Atomic Energy Agency (IAEA) Inspectorate in the safeguards review of MIVS surveillance data. MIPS is designed to review MIVS surveillance data automatically; firstly detecting significantly changed images and secondly identifying if the changed images show IAEA defined objects of safeguards interest. To achieve this, MIPS uses both digital image processing and neural network techniques. A change detector uses image processing techniques to identify significantly changed images. The MIPS neural network classifier detects images which may show an important object(s). The neural network is trained , i.e., given example images showing the objects that it must recognize, for each different facility. The MIPS change detection algorithms reduce the original MIVS data by eliminating images without significant activity. The MIPS neural network algorithms further reduce this data by eliminating images which may not show a safeguards significant object. The images analyzed by both the change detector and the neural network are available for inspector review. The MIPS algorithms are implemented in commercially available hardware. A high-level menu-driven system interface allows inspectors to train the neural network and to operate both the change detection and neural network classification. An evaluation program was conducted jointly by Sandia National Laboratories (SNL) and the IAEA to determine the systems capabilities on a variety of MIVS data. The MIPS processing techniques and the user interface were evaluated by IAEA inspectors. Performance tests were also completed on a variety of MIVS data. This paper provides a description of the Class II MIPS and the evaluation program and reports on the results of this joint evaluation. 7 refs., 4 figs., 3 tabs.

Betavoltaic power sources operate by converting the nuclear decay energy of beta-emitting radioisotopes into electricity. Since they are not chemically driven, they could operate at temperatures which would either be to hot or too cold for typical chemical batteries. Further, for long lived isotopes, they offer the possibility of multi-decade active lifetimes. Two approaches are being investigated: direct and indirect conversion. Direct conversion cells consist of semiconductor diodes similar to photovoltaic cells. Beta particle directly bombard these cells, generating electron-hole pairs in the semiconductor which are converted to useful power. Many using low power flux beta emitters, wide bandgap semiconductors are required to achieve useful conversion efficiencies. The combination of tritium, as the beta emitter, and gallium phosphide (GaP), as the semiconductor converter, was evaluated. Indirect conversion betacells first convert the beta energy to light with a phosphor, and then to electricity with photovoltaic cells. An indirect conversion power source using a tritium radioluminescent (RL) light is being investigated. Our analysis indicates that this approach has the potential for significant volume and cost savings over the direct conversion method. 7 refs., 11 figs.

Over the past three years, several experiments have been conducted at the Brookhaven National Laboratory Radiation Effects Facility. These experiments have been investigations of proton induced radiation effects in individual electronic components, circuits, operational subsystems and full systems. Our investigations using 170--200 MeV protons have included total dose effects up to 12 Mrad, dose rate effects of the ionizing radiation in the 10{sup 5} to 10{sup 8} rad/s range, the displacement damage effects of the protons up to 10{sup 15} p/cm{sup 2}, and the proton induced thermal shift and thermal-rate effects. The target thickness of many test devices was an appreciable fraction of the range of 200 MeV protons. In our proton beam testing experiments at BNL, dosimetry placed downstream of the target consistently yielded higher dose in rad and in particle fluence than in dosimetry placed upstream of the target. We designed and performed an experiment to study this dose enhancement. The objective of the experiment was to determine the effect of sample thickness on our three methods of dosimetry. The data from the PIN diodes and tantalum calorimeters were consistent and followed the expected DE/DX curve. They show a dose enhancement effect. The proton beam interacts and loses energy as it travels through thick targets. The exiting lower energy beam deposits more energy into the dosimetry because the stopping power increases with decreasing proton energy.

In this paper we review three proposed mechanisms for GaAs ALE and review or present data support or contradiction of these mechanisms. Surface chemistry results clearly demonstrated that TMGa irreversibly chemisorbs on the Ga-rich GaAs(100) surface. The reactive sticking coefficient (RSC) of TMGa on the adsorbate-free Ga-rich GaAs(100) surface was measured to be {approximately}0.5, conclusively demonstrating that the selective adsorption'' mechanism of ALE is not valid. We describe kinetic evidence for methyl radical desorption in support of the adsorbate inhibition'' mechanism. The methyl radical desorption rates determined by temperature programmed desorption (TPD) demonstrate that desorption is at least a factor of {approximately}10 faster from the As-rich c(2 {times} 8)/(2 {times} 4) surface than from the Ga-rich surface. It is disparity in CH{sub 3} desorption rates between the As-rich and Ga-rich surfaces that is largely responsible for GaAs ALE behavior. A gallium alkyl radical (e.g. MMGa) is also observed during TPD and molecular beam experiments, in partial support of the flux balance'' mechanism. Stoichiometry issues of ALE are also discussed. We have discovered that arsine exposures typical of atmospheric pressure and reduced pressure ALE lead to As coverages {ge} 1 ML, which provides the likely solution to the stoichiometry question regarding the arsine cycle. 32 refs., 6 figs.

A procedure was developed to use solder technology in the assembly of a single-crystal quartz accelerometer. 87.5Au-12.5Ge (wt.%) solder films 0.5 {times} 10{sup {minus}6}, 1.0 {times} 10{sup {minus}6}, and 2.0 {times} 10{sup {minus}}6 m thick were formed by the electron beam deposition of individual layers of Au and Ge with thicknesses so that the bulk film composition equals the eutectic composition. Interdiffusion of the Au and Ge formed the solder; thermal-physical measurements showed the multilayer films to behave similarly to bulk 87.5Au-12.5Be solder in process thermal cycles. The 2.0 {times} 10{sup {minus}6}m thick quartz/Au-Ge/quartz bonds had an adhesive tensile strength of 17 {plus minus} 2 MPa. The strength increased to 29 {plus minus} 3 MPa and 27 {plus minus} 12 MPa after thermal shock and thermal cycle exposures respectively. The 1.0 {times} 10{sup {minus}6} m thick bonds exhibited strengths of 16 {plus minus} 3 MPa, 16 MPa and 15 {plus minus} 8 MPa in the as-fabricated, post-thermal shock, and post-thermal cycled samples, respectively. The 0.5 {times} 10{sup {minus}6} m joints produced a large degree of scatter in the strength values. Accelerometers assembled with the 2.0 {times} 10{sup {minus}6} m thick joints demonstrated a significant improvement in temperature performance as opposed to units fabricated with a polyimide adhesive. 8 refs., 12 figs., 8 tabs.

This paper is about the spatial resolution of x-ray microanalysis in thin foils. The theory of the scattering of an electron beam with a thin foil is discussed.

Upon becoming Secretary of the Department of Energy (DOE), Admiral Watkins first pledged to Congress that he would clean-up'' the nuclear weapons production complexes and then initiated many changes in the way DOE facilities are operated. He generated new orders regarding environments, safety, and health and created investigation units called Tiger Teams'' to check on how well his orders were being followed. During the spin-up of this massive undertaking, DOE decided to include all its facilities and not just the ones involved in nuclear production. This resulted in research and development labs, such as Lawrence Livermore, Los Alamos, and Sandia National Laboratories being subjected to more stringent regulations. This paper addresses the action Sandia National Laboratories has taken during the past year, particularly in regard to its pulsed-power accelerators, to come into compliance with the new DOE orders. 2 tabs.

The measurement and understanding of the fracture toughness of ductile cast irons, DCI, are critical to the analysis of nuclear transportation casks made from these alloys. Cask containment must be assured for all loading events from normal handling to accidents during which high loads can be delivered at elevated rates. Cask walls are commonly in the range of 20 to 50 cm thick (or greater) in order to provide requisite nuclear shielding, and this requires that associated mechanical constraint effects must be considered. At elevated temperatures (i.e., in the vicinity of ambient) DCI behaves in an elastic-plastic manner, even for large section sizes (B>20 cm) and moderately high loading rates. However, as the temperature is lowered or the loading rate is increased, ferritic DCI alloys exhibit a relatively sharp transition to linear elastic behavior, with a significant decrease in the fracture toughness. The fracture toughness of a DCI alloy has been measured using linear elastic and elastic-plastic experimental techniques. Measurements have been made as a function of temperature, loading rate and section size. The loading rates span the range which a cask could experience during normal transport and handling, as well as accident events. 15 refs., 7 figs., 4 tabs.

Sandia National Laboratories and the University of New Mexico's Anderson School of Management are developing a program which enables M.B.A. students to assist in commercializing Sandia developed technologies. Thus far, students have prepared detailed business plans (which include market analyses, design and development sections, and pro forma financials) for a wide range of technologies. Potential applications include waste management, cancer treatment, oil and gas transportation, coating of plastics, manufacturing and assembly, and parts inspections. By having graduate students conduct the research necessary to identify positive net-present-value projects, Sandia is able to interest private sector firms in its technologies.

Short communication.

Several countries propose to permanently dispose of spent reactor fuel as waste in geologic repositories. There is no basis for terminating safeguards on spent fuel, since it does not meet the criteria specified for termination, and conceivably it might be subsequently recovered and used for prohibited purposes. The paper proposed safeguards measures for spent fuel undergoing preparation, emplacement, recoverable storage, and after site closure which are consistent with other IAEA safeguards but which differ in detail, commensurate with the lesser risk of diversion relative to materials in other parts of the fuel cycle. The proposed measures rely on item accountability of discrete units, by means of containment and surveillance. The concept is consistent with the guidelines contained in Part I of the Safeguards Document, INFCIRC/153, but not entirely with Part II, which is based on verified material balances. After final site closure safeguards are limited to infrequent site observations, which would be sufficient to detect any attempts to recover the material. The paper points out the magnitude of effort required for recovery and the difficulty of concealing if from casual observation. 4 refs.

This paper addresses the issue of collision avoidance in unknown or partially modeled environments using a capacitive sensor. An eight channel capacitance-based sensor system which can detect obstacles up to 400 mm (16 inches) away has been developed. This sensor can detect both conductive and non-conductive obstacles of arbitrary color and shape. The sensor hardware is reliable and inexpensive, and it may be fabricated using flexible printed circuit boards to provide whole-arm and joint protection for any robot or manipulator. Simple collision avoidance control algorithms have been implemented on a two-link robot arm. The sensor and control system enable the robot arm to avoid a conductive post and a concrete block. 13 refs., 9 figs.

This paper presents two algorithms that construct a set of initial (x, y, {theta}) configurations from which a given action will reliably accomplish a planar manipulation task. The first algorithm applies energy arguments to construct a conservative set of successful initial configurations, while the second algorithm performs numerical integration to construct a set that is much less conservative. The algorithms may be applied to a variety of tasks, including pushing, placing-by-dropping, and force-controlled assembly tasks. Both algorithms consider the task geometry and mechanics, and allow uncertainty in every task parameter except for the object shapes. Experimental results are presented which demonstrate the validity of the algorithms' output for two example manipulation tasks. 16 refs., 8 figs.

Sandia National Laboratories developed an Authenticated Secure Container System (ASCS) for the International Atomic Energy Agency (IAEA). Agency standard weights and safeguards samples can be stored in the ASCS to provide continuity of knowledge. The ASCS consists of an optically clear cover, a base containing the Authenticated Item Monitoring System (AIMS) transmitter, and the AIMS receiver unit for data collection. The ASCS will provide the Inspector with information concerning the status of the system, during a surveillance period, such as state of health, tampering attempts, and movement of the container system. The secure container is located inside a Glove Box with the receiver located remotely from the Glove Box. AIMS technology uses rf transmission from the secure container to the receiver to provide a record of state of health and tampering. The data is stored in the receiver for analysis by the Inspector during a future inspection visit. 2 refs.

Short communication.

Short communication.

The advent of optical storage has made the digital storage of documents a viable option from both a practical and legal perspective. However, the availability of Optical Disk Storage raises questions regarding the destruction of the stored records and standards of longevity, and the admissibility in court of records produced from optical storage has not been tested. This paper will attempt to address these issues. 6 refs.

A 1K bit Shadow RAM has been developed for storage of critical data in a high transient radiation environment. The circuit includes a 1K bit (128 {times} 8) static RAM with two non-volatile (NV) shadows. The NV shadows are used to back-up the data in the static RAM allowing the circuit to be powered down during transient radiation without losing critical data. This paper will describe the circuit's operation and characterization results.

The use of carbon materials in catalytic system has been traditionally associated with their properties as supports. There are, however, some literature data describing their use as catalysts. Our results show that no simple relationship exists between the catalytic activity of some carbon materials for selective cleavage of carbon-carbon bonds adjacent to condensed polyaromatic rings an the elemental composition or surface area of these materials. The activity is dependent, however, upon the precursor used to generate the carbon material. Moreover, for a given precursor the activity is determined by the method of conversion to the carbon material. It remains to be established what elements of structure are responsible for the observed activity in carbon materials that are catalytically active. 12 refs., 7 tabs., 1 fig.

The strain rate in steady shock waves is proportional to the fourth power of shock amplitude for a wide variety of materials over a broad range of strain rates. A model based on this observation gives good agreement not only with steady-wave profiles but also with data on non-steady waves in aluminum. In apparent contrast, data on vanadium and uranium at low strain rates indicates a departure from the fourth power law if the wave profiles are assumed to be steady. However, when predicted profiles are produced by allowing the waves to propagate and evolve over the actual experimental sample thickness, the fourth power model gives excellent agreement with the wave profile data even though the wave profiles in the calculations have not yet reached steady state. The implication is that the experimental data do not represent steady waves, and the model is predicting the correct evolution of non-steady waves in vanadium and uranium. 7 refs., 2 figs.

The National Competitiveness Technology Transfer Act of 1989 has opened up the vast resources of our nation's national laboratories to the electronics industry. The electronics industry stands to gain advanced technology development, increased competitiveness, resource-sharing, and technology protection from this act. Sandia National Laboratories can help our nation's companies and universities in developing and applying advanced, commercially valuable technologies and in solving technological problems. These technological areas are discussed. A clear, non-bureaucratic process of tapping the microelectronics expertise and resources of Sandia National Laboratories is presented.

Highly reactive coal pyrites and unstable museum specimens are easily distinguished from the stable pyrites by the growth of white crystals that cover samples exposed to room atmosphere for short periods of time. Continued exposure to the atmosphere will eventually cause the specimens to fall apart. The term rotten pyrite has been applied to museum specimens that fall apart in this way. SEM studies show that reactive (rotten) pyrites contain between 100 and 10,000 times more dislocations than stable pyrites. Shock-loading of a stable pyrite to 7.5 GPa and 17 GPa increased its reactivity by a factor of two, probably caused by an increase in the number of imperfections. However, shock-loading at 22 GPa decreased the reactivity of pyrite because the imperfections produced at the higher pressure were removed during annealing the sample received at the higher temperature. Although there was a factor of six difference between the most and least reactive shocked MCB (commercial pyrite) samples, shock-loading did not increase the reactivity of the MCB pyrite to that of the Queensland coal pyrite. The results in hand show that while shock-loading produces sufficient imperfections to increase the reactivity of pyrites, there is insufficient data to show that imperfections are the main reason why some coal pyrites are highly reactive. 9 refs., 1 fig., 1 tab.

A wafer-level test system, capable of 50-MHz data rates, is shown to support (1) process improvement and control and (2) test-structure-to-IC correlation efforts for total-dose hardness assurance. 11 refs., 3 figs.

Transmitting digital voice via packetized mobile communications systems that employ relatively short packet lengths and narrow bandwidths often necessitates very low bit rate coding of the voice data. Sandia National Laboratories is currently developing an efficient voice coding system operating at 800 bits per second (bps). The coding scheme is a modified version of the 2400 bps NSA LPC-10e standard. The most significant modification to the LPC-10e scheme is the vector quantization of the line spectrum frequencies associated with the synthesis filters. An outline of a hardware implementation for the 800 bps coder is presented. The speech quality of the coder is generally good, although speaker recognition is not possible. Further research is being conducted to reduce the memory requirements and complexity of the vector quantizer, and to increase the quality of the reconstructed speech. 4 refs., 2 figs., 3 tabs.

BA85 is a routine for the quantitative reduction of x-ray data collected from oxide samples in an electron microprobe. BA85 is based on the correction procedures developed by Bence and Albee and is coded in Flextran for use with the TASK8 microprobe operating system. Features include stoichiometry and statistical calculations, the use of a 90 - oxide A-factor matrix which contains all of the common valence states for such elements as Fe and Cr, the ability to analyze up to 45 oxides, and the ability to create and use mineral codes which permit associating up to 15 oxides with three letter mnemonic codes. Entering a mineral code results in the analysis of the oxides associated with it and the performance of one of 21 endmember calculations. 13 refs., 2 figs., 3 tabs.

Application of conventional fracture mechanics concepts to treat crack growth and failure problems in geological media is discussed in this paper. Conventional fracture mechanics methods were developed mainly for metallic materials which exhibit nonlinearity associated mainly with plasticity type responses. Thus, these are not directly applicable to geological materials whose inelastic responses originate from inherent large-scale heterogenities, microcracking, strain softening, et. Proposed fracture mechanics methods for geological materials and their associated problems are discussed. To demonstrate the utility of fracture mechanics concepts in geological applications, examples involving multiple-fracture generation in tight gas formations and oil shale blasting design are presented.

This paper seeks to improve the synergism between computational aerodynamics and wind tunnel experimentation. In this paper, experimental and computational results are presented for a hypersonic vehicle configuration at Mach 8. Comparisons are made between experimental and computational results in order to improve the accuracy of both approaches. The basic vehicle configuration is a spherically blunted cone with a slice parallel with the axis of the vehicle. The half-angle of the cone is 10 deg. and the ratio of spherical nose radius to base radius in 10%. Onto the slice portion of the vehicle can be attached flaps with three different deflection angles; 10, 20, and 30 deg. All of the experimental results were obtained in the Sandia Mach 8 long duration, blow-down, hypersonic wind tunnel. Flow visualization results include surface oil flow, spark schlieren, and liquid crystal photographs and video. The liquid crystals were used as an aid in verifying that a laminar boundary layer existed over the entire body. An extensive uncertainty analysis was conducted to estimate quantitatively the accuracy of the measurement. Computational aerodynamic force and moment predictions are compared with the wind tunnel data. The Sandia Parabolized Navier-Stokes code is used to generate solutions for the sliced vehicle (no flap) and partial solutions for the flapped vehicle. For the geometry with the flap, an axially separated flow occurs and a time iterative Navier-Stokes code is used to provide comparisons with the data. This paper presents a portion of the results given in earlier works and also discusses new experimental results with this configuration.

Plotting and summary routines available for the TASK8 microprobe operating system are able to accept both spectral and quantitative data. All of the routines are able to be run as subroutines from within the TASK8 program or as stand alone programs. Additionally, the spectral plotting routine can be run from within a modified version of SQ. The quantitative routines currently in use with TASK8. Quantitative output can be sent by the summary program to a serial port that is connected to a VAX or PC in addition to printing it. The plotting codes have been written so that either a Tracor Northern TN2000 or a TN5xxx analyzer may be used with either a Hewlett Packard HP7221 series or a HP7470/HP7550 series plotter. The plotting routine for spectra incorporates a user definable usual was'' option to simplify most input procedures. The quantitative plotting routine offers numerous options including scale expansion, smoothing, auto-labeling, special symbols, and multiple pens. 5 refs., 5 figs.

A computational scheme is presented to solve the unsteady Navier-Stokes equations over a blunt body at high altitude, high Mach number atmospheric reentry flow conditions. This continuum approach is directed to low Reynolds/low density hypersonic flows by accounting for non-zero bulk viscosity effects in near frozen flow conditions. A significant difference from previous studies is the inclusion of the capability to model non-zero bulk viscosity effects. The grid definition for these low Reynolds number, viscous dominated flow fields is especially important in terms of numerical stability and accurate heat transfer solutions. 11 refs., 15 figs.

This paper describes a new technique for the detection of x-rays in electron column instruments used in microanalysis. In electron column instruments, the point source of x-rays is produced by the interaction of a focused electron beam with the sample. Neither of the conventional methods, wavelength dispersive (WDS) nor energy dispersive (EDS) based spectrometry, is optimized for low Z element quantitative analysis. In WDS applications, where the analyte elements are Be through P, chemical effects complicate the x-ray measurement process. Peak positions and shapes are altered, sometimes very strongly, by the electron configurations of the analyte atoms and neighboring atoms. In these cases, the ideal spectrometer would profile the peak and some small amount of continuum on either side of the peak such that an accurate peak area could be calculated. Present WDS spectrometers are serial in nature and cannot directly measure peak areas, often causing errors in the determination of light element concentrations. Bastin and co-workers have developed an elegant method to provide accurate area determinations, using the serial spectrometer, by a three point procedure. The parallel wavelength dispersive spectrometer (PWDS) we propose here is ideally suited for those applications.

A new facility is being constructed for the Primary Standards Laboratory at Sandia National Laboratories in Albuquerque, New Mexico. Salient features of the final design, described briefly in this paper, follow the conceptual design of 1984 to a fairly high degree. Because the facility is in process of construction, this paper is a progress report. 6 refs., 2 figs., 1 tab.

Curved and planar inversion domain boundaries (IDB) in aluminum nitride (AIN) form in sintered AIN ceramics containing oxygen, and oxygen is known to segregate to them. A number of interface models shown in Table 1, have been suggested based upon crystallographic constraints, chemical information and observed high resolution electron microscope (HREM) images. Until recently, problems with simulation of HREM images from AIN have made accurate determination of the structure of the IDB interface difficult. The aim of the present study was to use quantitative analytical electron microscopy (AEM) to determine the oxygen concentration at the IDBs, and then to compare the experimental results with calculated oxygen concentrations for each of the IDB models using a Monte Carlo electron trajectory simulation program. A match, if any, between the experimental and calculated oxygen concentrations would indicate the model which best described the IDB structure. The best match was obtained for Youngman's defect model. 14 refs., 5 figs., 3 tabs.

Plessite in iron meteorites is a two phase structure with an fcc precipitate phase in a bcc matrix. After Fe-Ni martensite forms during slow cooling, the martensite decomposition occurs at different temperatures. The morphology of the precipitates and the Ni content of both precipitate and matrix vary with the local average Ni composition of the plessite. In this study, the plessite structure of two octahedrites, Carlton and Grant, was characterized using the analytical electron microscope (AEM). The composition of the taenite precipitates in various regions of plessite which have 9 to 13 wt% and 15 to 20 wt% Ni composition were measured using an x-ray energy dispersive spectrometer (EDS) in the AEM. To understand the phase transformation processes which occurred during the plessite formation, an experimental set of Fe-Ni binary and Fe-Ni-P ternary alloys were made and analyzed also using the AEM. The alloys, which have 15 to 30 wt% Ni (0.2-0.3 wt% P for ternary alloys), were first homogenized at 1,200{degree}C and quenched to liquid nitrogen temperature to form martensite. They were then isothermally heat treated for 60 to 400 days in the temperature range from 450{degree}C to 300{degree}C. Two phase structures, which are similar to those of plessite, were formed in these alloys. The Fe-Ni phase equilibria measured in the decomposed martensite alloys can be used to explain the difference in Ni composition between precipitates in the high Ni and low Ni plessite regions. 3 refs., 2 figs.