The purpose of this LDRD was to generate data that could be used to populate and thereby reduce the uncertainty in global carbon cycle models. These efforts were focused on developing a system for determining the dissolution rate of biogenic calcite under oceanic pressure and temperature conditions and on carrying out a digital transcriptomic analysis of gene expression in response to changes in pCO2, and the consequent acidification of the growth medium.
This short-term, late-start LDRD examined the effects of nutritional deprivation on the energy harvesting complex in microalgae. While the original experimental plan involved a much more detailed study of temperature and nutrition on the antenna system of a variety of TAG producing algae and their concomitant effects on oil production, time and fiscal constraints limited the scope of the study. This work was a joint effort between research teams at Sandia National Laboratories, New Mexico and California. Preliminary results indicate there is a photosystem response to silica starvation in diatoms that could impact the mechanisms for lipid accumulation.
Current state-of-the-art biomimetic methodologies employed worldwide for the realization of self-assembled nanomaterials are adequate for certain unique applications, but a major breakthrough is needed if these nanomaterials are to obtain their true promise and potential. These routes typically utilize a 'top-down' approach in terms of controlling the nucleation, growth, and deposition of structured nanomaterials. Most of these techniques are inherently limited to primarily 2D and simple 3D structures, and are therefore limited in their ultimate functionality and field of use. Zeolites, one of the best-known and understood synthetic silica structures, typically possess highly ordered silica domains over very small length scales. The development of truly organized and hierarchical zeolites over several length scales remains an intense area of research world wide. Zeolites typically require high-temperature and complex synthesis routes that negatively impact certain economic parameters and, therefore, the ultimate utility of these materials. Nonetheless, zeolite usage is in the tons per year worldwide and is quickly becoming ubiquitous in its applications. In addition to these more mature aspects of current practices in materials science, one of the most promising fields of nanotechnology lies in the advent and control of biologically self-assembled materials, especially those involved with silica and other ceramics such as hydroxyapatite. Nature has derived, through billions of years of evolutionary steps, numerous methods by which fault-tolerant and mechanically robust structures can be created with exquisite control and precision at relatively low temperature ranges and pressures. Diatoms are one of the best known examples that exhibit this degree of structure and control known that is involved with the biomineralization of silica. Diatoms are eukaryotic algae that are ubiquitous in marine and freshwater environments. They are a dominant form of phytoplankton critical to global carbon fixation. The silicified cell wall of the diatom is called the frustule, and the intricate silica structure characteristic of a given species is known as the valve. There are two general classes of diatoms, based on their overall morphologies, the pennate and centric. Diatoms achieve their silicified structures in exact fashion through genetically inspired design rules coupled with precisely directed biochemistry occurring at temperatures ranging from a few degrees Celsius (polar species) to temperatures just over room temperature (tropical species). Different species of diatoms produce markedly different structures. To start with, there are two basic types of frustule macromorphologies: pennate diatoms display bilateral symmetry and centric diatoms show radial symmetry. There are thousands of permutations of these two basic forms and the micromorphology of the valve can be quite complex with all types of pore arrangements and morphologies (Figure 1.1). The detailed morphology of the cell wall of a given diatom species is reproduced with exactness, because the process is genetically encoded. Three types of cell wall proteins have been identified in diatoms; the frustulins, pleuralins, and silaffins. Frustulins are cell wall proteins that form an organic coat to protect the silica structures from dissolution into the aqueous environment. Pleuralins are associated with a specific subcomponent of the frustule during cell division, and play a role in hypotheca-epitheca development. Silaffins from Cylindrotheca fusiformis are short chain-length peptides that play a direct role in the silica polymerization process, and possess unique biochemical post-translation functionalization. Larger proteins with silaffin activity have recently been described in Thalassiosira pseudonana. Frustulins and pleuralins play no role in silica polymerization or structure formation in diatoms, whereas the silaffins are one of the primary polymerization determinants. In addition to the silaffins, a class of long-chain polyamines associated with diatom silica has been identified, and shown to also be involved in the silica polymerization process. The silaffins and polyamines are likely to be the two major determinants of silica polymerization in diatoms. Their involvement in the formation of higher order structure is unclear; there have been suggestions that they self-assemble in various combinations to form the final frustule structure but these are highly speculative as there is no substantial data to support this. It is clear from a long history of electron microscopic observations that a major determinant of silica structure in diatoms is generated by growth and molding of the silica deposition vesicle (SDV), the specialized intracellular compartment were the frustule is made. Diatoms are the focus of research activity on several fronts, including the processes by which their distinct silica frustules are formed.
This one year LDRD addressed the problem of rapid characterization of bacterial spores such as those from the genus Bacillus, the group that contains pathogenic spores such as B. anthracis. In this effort we addressed the feasibility of using a proteomics based approach to spore characterization using a subset of conserved spore proteins known as the small acid soluble proteins or SASPs. We proposed developing techniques that built on our previous expertise in microseparations to rapidly characterize or identify spores. An alternative SASP extraction method was developed that was amenable to both the subsequent fluorescent labeling required for laser-induced fluorescence detection and the low ionic strength requirements for isoelectric focusing. For the microseparations, both capillary isoelectric focusing and chip gel electrophoresis were employed. A variety of methods were evaluated to improve the molecular weight resolution for the SASPs, which are in a molecular weight range that is not well resolved by the current methods. Isoelectric focusing was optimized and employed to resolve the SASPs using UV absorbance detection. Proteomic signatures of native wild type Bacillus spores and clones genetically engineered to produce altered SASP patterns were assessed by slab gel electrophoresis, capillary isoelectric focusing with absorbance detection as well as microchip based gel electrophoresis employing sensitive laser-induced fluorescence detection.
This one year LDRD addresses problems of threat assessment and restoration of facilities following a bioterror incident like the incident that closed down mail facilities in late 2001. Facilities that are contaminated with pathogenic spores such as B. anthracis spores must be shut down while they are treated with a sporicidal agent and the effectiveness of the treatment is ascertained. This process involves measuring the viability of spore test strips, laid out in a grid throughout the facility; the CDC accepted methodologies require transporting the samples to a laboratory and carrying out a 48 hr outgrowth experiment. We proposed developing a technique that will ultimately lead to a fieldable microfluidic device that can rapidly assess (ideally less than 30 min) spore viability and effectiveness of sporicidal treatment, returning facilities to use in hours not days. The proposed method will determine viability of spores by detecting early protein synthesis after chemical germination. During this year, we established the feasibility of this approach and gathered preliminary results that should fuel a future more comprehensive effort. Such a proposal is currently under review with the NIH. Proteomic signatures of Bacillus spores and vegetative cells were assessed by both slab gel electrophoresis as well as microchip based gel electrophoresis employing sensitive laser-induced fluorescence detection. The conditions for germination using a number of chemical germinants were evaluated and optimized and the time course of protein synthesis was ascertained. Microseparations were carried out using both viable spores and spores inactivated by two different methods. A select number of the early synthesis proteins were digested into peptides for analysis by mass spectrometry.
This plan describes the process for managing research generated medical waste at Sandia National Laboratories/California. It applies to operations at the Chemical and Radiation Detection Laboratory (CRDL), Building 968, and other biosafety level 1 or 2 activities at the site. It addresses the accumulation, storage, treatment and disposal of medical waste and sharps waste. It also describes the procedures to comply with regulatory requirements and SNL policies applicable to medical waste.
The U.S. Department of Energy recently announced the first five grants for the Genomes to Life (GTL) Program. The goal of this program is to ''achieve the most far-reaching of all biological goals: a fundamental, comprehensive, and systematic understanding of life.'' While more information about the program can be found at the GTL website (www.doegenomestolife.org), this paper provides an overview of one of the five GTL projects funded, ''Carbon Sequestration in Synechococcus Sp.: From Molecular Machines to Hierarchical Modeling.'' This project is a combined experimental and computational effort emphasizing developing, prototyping, and applying new computational tools and methods to elucidate the biochemical mechanisms of the carbon sequestration of Synechococcus Sp., an abundant marine cyanobacteria known to play an important role in the global carbon cycle. Understanding, predicting, and perhaps manipulating carbon fixation in the oceans has long been a major focus of biological oceanography and has more recently been of interest to a broader audience of scientists and policy makers. It is clear that the oceanic sinks and sources of CO(2) are important terms in the global environmental response to anthropogenic atmospheric inputs of CO(2) and that oceanic microorganisms play a key role in this response. However, the relationship between this global phenomenon and the biochemical mechanisms of carbon fixation in these microorganisms is poorly understood. The project includes five subprojects: an experimental investigation, three computational biology efforts, and a fifth which deals with addressing computational infrastructure challenges of relevance to this project and the Genomes to Life program as a whole. Our experimental effort is designed to provide biology and data to drive the computational efforts and includes significant investment in developing new experimental methods for uncovering protein partners, characterizing protein complexes, identifying new binding domains. We will also develop and apply new data measurement and statistical methods for analyzing microarray experiments. Our computational efforts include coupling molecular simulation methods with knowledge discovery from diverse biological data sets for high-throughput discovery and characterization of protein-protein complexes and developing a set of novel capabilities for inference of regulatory pathways in microbial genomes across multiple sources of information through the integration of computational and experimental technologies. These capabilities will be applied to Synechococcus regulatory pathways to characterize their interaction map and identify component proteins in these pathways. We will also investigate methods for combining experimental and computational results with visualization and natural language tools to accelerate discovery of regulatory pathways. Furthermore, given that the ultimate goal of this effort is to develop a systems-level of understanding of how the Synechococcus genome affects carbon fixation at the global scale, we will develop and apply a set of tools for capturing the carbon fixation behavior of complex of Synechococcus at different levels of resolution. Finally, because the explosion of data being produced by high-throughput experiments requires data analysis and models which are more computationally complex, more heterogeneous, and require coupling to ever increasing amounts of experimentally obtained data in varying formats, we have also established a companion computational infrastructure to support this effort as well as the Genomes to Life program as a whole.