In-situ additive manufacturing (AM) diagnostic tools (e.g., optical/infrared imaging, acoustic, etc.) already exist to correlate process anomalies to printed part defects. This current work aimed to augment existing capabilities by: 1) Incorporating in-situ imaging w/ machine learning (ML) image processing software (ORNL- developed "Peregrine") for AM process anomaly detection 2) Synchronizing multiple in-situ sensors for simultaneous analysis of AM build events 3) Correlating in-situ AM process data, generated part defects and part mechanical properties The key R&D question investigated was to determine if these new combined hardware/software tools could be used to successfully quantify defect distributions for parts build via SNL laser powder bed fusion (LPBF) machines, aiming to better understand data-driven process-structure-property- performance relationships. High resolution optical cameras and acoustic microphones were successfully integrated in two LPBF machines and linked to the Peregrine ML software. The software was successfully calibrated on both machines and used to image hundreds of layers of multiple builds to train the ML software in identifying printed part vs powder. The software's validation accuracy to identify this aspect increased from 56% to 98.8% over three builds. Lighting conditions inside the chamber were found to significantly impact ML algorithm predictions from in-situ sensors, so these were tailored to each machine's internal framework. Finally, 3D part reconstructions were successfully generated for a build from the compressed stack of layer-wise images. Resolution differences nearest and furthest from the optical camera were discussed. Future work aims to improve optical resolution, increase process anomalies identified, and integrate more sensor modalities.
Additively manufactured metamaterials such as lattices offer unique physical properties such as high specific strengths and stiffnesses. However, additively manufactured parts, including lattices, exhibit a higher variability in their mechanical properties than wrought materials, placing more stringent demands on inspection, part quality verification, and product qualification. Previous research on anomaly detection has primarily focused on using in-situ monitoring of the additive manufacturing process or post-process (ex-situ) x-ray computed tomography. In this work, we show that convolutional neural networks (CNN), a machine learning algorithm, can directly predict the energy required to compressively deform gyroid and octet truss metamaterials using only optical images. Using the tiled nature of engineered lattices, the relatively small data set (43 to 48 lattices) can be augmented by systematically subdividing the original image into many smaller sub-images. During testing of the CNN, the prediction from these sub-images can be combined using an ensemble-like technique to predict the deformation work of the entire lattice. This approach provides a fast and inexpensive screening tool for predicting properties of 3D printed lattices. Importantly, this artificial intelligence strategy goes beyond ‘inspection’, since it accurately estimates product performance metrics, not just the existence of defects.
Refractory High Entropy Alloys (RHEAs) and Refractory Complex Concentrated Alloys (RCCAs) are high-temperature structural alloys ideally suited for use in harsh environments. While these alloys have shown promising structural properties at high temperatures that exceed the practical limits of conventional alloys, such as Ni-based superalloys, exploration of the complex phase-space of these materials remains a significant challenge. We report on a high-throughput alloy processing and characterization methodology, leveraging laser-based metal additive manufacturing (AM) and mechanical testing techniques, to enable rapid exploration of RHEAs/RCCAs. We utilized in situ alloying and compositional grading, unique to AM processing, to rapidly-produce RHEAs/RCCAs using readily available and inexpensive commercial elemental powders. We demonstrate this approach with the MoNbTaW alloy system, as a model material known for having exceptionally high strength at elevated temperature when processed using conventional methods (e.g., casting). Microstructure analysis, chemical composition, and strain rate dependent hardness of AM-processed material are presented and discussed in the context of understanding the structure-properties relationships of RHEAs/RCCAs.
