Publications

Results 100226–100250 of 100,993

Search results

Jump to search filters

Application of NUREG-1150 methods and results to accident management

Camp, Susan E.

The use of NUREG-1150 and similar Probabilistic Risk Assessments in NRC and industry risk management programs is discussed. Risk management'' is more comprehensive than the commonly used term accident management.'' Accident management includes strategies to prevent vessel breach, mitigate radionuclide releases from the reactor coolant system, and mitigate radionuclide releases to the environment. Risk management also addresses prevention of accident initiators, prevention of core damage, and implementation of effective emergency response procedures. The methods and results produced in NUREG-1150 provide a framework within which current risk management strategies can be evaluated, and future risk management programs can be developed and assessed. Examples of the use of the NUREG-1150 framework for identifying and evaluating risk management options are presented. All phases of risk management are discussed, with particular attention given to the early phases of accidents. Plans and methods for evaluating accident management strategies that have been identified in the NRC accident management program are discussed. 2 refs., 3 figs.

More Details

Interfacial force sensor with force-feedback control

Joyce, S.A.; Houston, J.E.; Smith, B.K.

A new interfacial force microscope capable of measuring the forces between two surfaces over the entire range of surface separations, up to contact, has been developed. The design is centered around a differential capacitance displacement sensor where the common capacitor plate is supported by torsion bars. A force-feedback control system balances the interfacial forces at the sensor, maintaining the common capacitor plate at its rest position. This control eliminates the instability which occurs with the conventional cantilever-based force sensors when the attractive force gradient exceeds the mechanical stiffness of the cantilever. The ability to measure interfacial forces at surface separations smaller than this instability point using the feedback control is demonstrated. 11 refs., 3 figs.

More Details

Polymer characterization using the time-resolved phosphorescence of singlet oxygen as a spectroscopic probe

Clough, Roger L.

The lowest excited electronic state of molecular oxygen, singlet oxygen ({sup 1}{Delta}{sub g}0{sub 2}), can be produced in solid organic polymers by a variety of different methods. Once produced, singlet oxygen will return to the ground triplet state by two pathways, radiative (phosphorescence) and non-radiative decay. Although the quantum efficiency of phosphorescence is small ({minus}10{sup {minus}5}), singlet oxygen can be detected by its emission at 1270 mn in both steady-state and time-resolved experiments. The phosphorescence of singlet oxygen can be used to characterize many properties of a solid organic polymer. 2 refs., 5 figs.

More Details

Design considerations for multi component molecular-polymeric nonlinear optical materials

Singer, K.D.; Kuzyk, M.G.; Fang, T.; Holland, W.R.; Cahill, P.A.

We review our work on multi component polymeric nonlinear optical materials. These materials consist of nonlinear optical molecules incorporated in a polymeric host. A cross-linked triazine polymer incorporating a dicyanovinyl terminated azo dye was found to be relatively stable at 85{degree} and posses an electro-optic coefficient of 11pm/V. We have also observed the zero dispersion condition in a new anomalous dispersion dye for phase matched second harmonic generation, and expect efficient conversion to the blue. A squarylium dye, ISQ, has been found to posses a large third order nonlinearity, and may display two-level behavior. 24 refs., 11 figs.

More Details

Contamination reduction program: A means to instituting ultra pure processing

Conley, W.R.

ULSI manufacturing technologies have resulted in the development of Ultra-Pure Processing (UPP) capabilities for the world-wide semiconductor industry. The primary goal of Ultra Pure Processing is the elimination of extraneous contaminants, both gaseous and particulate, from the wafer process environment. This calls for a comprehensive approach to the design, operation, and maintenance of semiconductor process equipment. Through UPP one may reduce the number of uncontrolled variables within a system enhancing implementation of Statistical Process Control on the process environment within the tool (in situ). Greater control over the process environment translates into increased product quality, manufacturability, throughput and yield. Instituting UPP requires the capability of monitoring contaminants in the process environment a well as a systematic approach to isolating and eliminating contamination sources. Ultra Pure Processing can result from a Contamination Reduction Program. Presented here are the results from a Contamination Reduction Program performed on a state-of-the-art vertical thermal process reactor (VTR). 8 figs., 5 tabs.

More Details

Accident sequence analysis for a BWR (Boiling Water Reactor) during low power and shutdown operations

Whitehead, Donnie W.

Most previous Probabilistic Risk Assessments have excluded consideration of accidents initiated in low power and shutdown modes of operation. A study of the risk associated with operation in low power and shutdown is being performed at Sandia National Laboratories for a US Boiling Water Reactor (BWR). This paper describes the proposed methodology for the analysis of the risk associated with the operation of a BWR during low power and shutdown modes and presents preliminary information resulting from the application of the methodology. 2 refs., 2 tabs.

More Details

A trellis-searched APC (adaptive predictive coding) speech coder

Malone, Kevin T.

In this paper we formulate a speech coding system that incorporates trellis coded vector quantization (TCVQ) and adaptive predictive coding (APC). A method for optimizing'' the TCVQ codebooks is presented and experimental results concerning survivor path mergings are reported. Simulation results are given for encoding rates of 16 and 9.6 kbps for a variety of coder parameters. The quality of the encoded speech is deemed excellent at an encoding rate of 16 kbps and very good at 9.6 kbps. 13 refs., 2 figs., 4 tabs.

More Details

Certified records manager exam

Ledbetter, Karen L.

The Institute of Certified Records Managers (ICRM) is a non-profit, certifying organization of professional records managers and administrators. ICRM members are experienced in information requirements, records and information systems, and the related office systems and technologies. All members have met certification requirements and have received the Certified Records Manager (CRM) designation. As the field of information and records management moves toward standardization, and as the application of new technologies and technicalities complicate the measurement and demonstration of professional competence, the need for a means of identifying persons who have basic competency increases. The ICRM is providing such a means by testing and certifying basic knowledge. More and more job announcements are requiring this evidence of competency. Unfortunately, as an organization, NIRMA has a relatively small number of CRMs. The goal of the ICRM Development Group is two-fold; (1) to encourage NIRMA members to obtain their certification by providing basic information and support and; (2) to develop the Nuclear Specialist test module which will demonstrate that bearers have demonstrated expertise in nuclear records management as well as basic competencies. This report covers the examination process.

More Details

Requirements identification: How do we know what to do

Ledbetter, Karen L.

The Nuclear Information and Records Management Association (NIRMA) Task Force on Requirements Identification is currently involved in a four part project. During the course of the next year the Task Force will: (1) identify the generic requirements documents which have common applicability to nuclear utilities and DOE organizations; (2) research the requirements documents to identify individual requirements; (3) develop and implement a PC based tracking system to present and maintain the research data; and (4) implement a process for ongoing review of requirements. This report discusses these issues.

More Details

Multiplexer/amplifier test results for SP-100

King, David L.

Multiplexer and amplifier systems must be designed with transistors that can perform satisfactorily over ten years to a total gamma dose of 120E6 rads and a total neutron fluence of 1.6E15 nvt for the SP-100 reactor system. Series of gamma and neutron tests have been completed to measure transistor degradation as a function of total dose, fluence, and temperature. Test results indicate that modest increases in temperature result in substantial improvement of transistor performance at a neutron flux of 8E8 n/cm{sup 2}/s. 2 refs., 3 figs.

More Details

Thermal-hydraulic design issues and analysis for the ITER (International Thermonuclear Experimental Reactor) divertor

Koski, Jorman A.

Critical Heat Flux (CHF), also called burnout, is one of the major design limits for water-cooled divertors in tokamaks. Another important design issue is the correct thermal modeling of the divertor plate geometry where heat is applied to only one side of the plate and highly subcooled flow boiling in internal passages is used for heat removal. This paper discusses analytical techniques developed to address these design issues, and the experimental evidence gathered in support of the approach. Typical water-cooled divertor designs for the International Thermonuclear Experimental Reactor (ITER) are analyzed, and design margins estimated. Peaking of the heat flux at the tube-water boundary is shown to be an important issue, and design concerns which could lead to imposing large design safety margins are identified. The use of flow enhancement techniques such as internal twisted tapes and fins are discussed, and some estimates of the gains in the design margin are presented. Finally, unresolved issues and concerns regarding hydraulic design of divertors are summarized, and some experiments which could help the ITER final design process identified. 23 refs., 10 figs.

More Details

Calorimetric measurements of energy transfer efficiency and melting efficiency in CO sub 2 laser beam welding

Fuerschbach, Phillip W.

Our previous calorimetric studies of weld melting efficiency and arc efficiency in the GTAW and PAW processes have naturally led us to speculate as to the magnitude of the efficiencies in the LBW process which to data have also not been adequately investigated. Most welding engineers that have had experience with the LBW process are acutely aware that the metals' absorptivity, the surface finish, and the laser wavelength, all play an important role in affecting the energy transfer efficiency, but the extent of their influence and our understanding of the influence of other process variables is not well understood. In addition, it is widely thought that only the LBW or EBW processes can be selected for applications where thermal damage and distortion from the welding process must be kept to a minimum. For these reasons, we have looked forward to performing these calorimetric experiments since they potentially can answer such important questions as: whether or not the melting efficiency of the LBW process is superior to that obtainable with conventional GTAW and PAW welding processes This study was prompted by poor production yields on switching device due to cracking of the ceramic header after final closure welding with the CO{sub 2} LBW process. This calorimetric study was begun in hopes of determining if allowed variations in production process control variables were responsible for increases in heat input and the resulting thermal stresses. By measuring the net heat input to the workpiece with the calorimeter and by measuring the laser output energy and the weld fusion zone size it was possible to determine the magnitudes of both the energy transfer efficiency and the melting efficiency as well as observe their dependence on the process variables. 3 refs.

More Details

On the design of component test plans based on system reliability objectives

Easterling, Robert G.

Component test plans are often designed by allocating a system's reliability goal among the system's components, then designing individual component test plans suitable for demonstrating achievement of each component's reliability goal. One use of the resulting component test data is the calculation of estimated system reliability, based on a model linking the component reliabilities to system reliability. The statistical precision of this system estimate depends on the component test plans (numbers of each component tested and the type of tests, e.g., variables or attributes) and, hence, is determined by the component test planners. Because system reliability may be of considerable interest, we feel an integrated view of component testing is required to assure that the ensemble of component tests will provide an adequate system reliability estimate. This paper considers the case of a series system of different components and binomial component data. For the case of equal numbers of units tested of each component (which can be shown to minimize total cost, subject to the risk constraints) the O.C. envelope is readily derived and from this envelope component test plans that satisfy the specified risks can be derived from equations that involve the cumulative binomial distribution function. Existing tables pertaining to acceptance sampling plans based on the binomial distribution can be used to determine the required number of component tests. 10 refs., 2 figs.

More Details

Time finite element methods for large rotational dynamics of multibody systems

Mello, F.J.

Weak formulations in Analytical Dynamics are developed, paralleling the variational methods in elastostatics, and including a fundamental yet novel approach for treating constraints (both holonomic and nonholonomic). A general three field approach is presented, in which the momentum balance conditions, the compatibility conditions between displacement and velocity, the constitutive relations and the displacement and momentum boundary conditions are all enforced in weak form. A primal, or kinematic formulation is developed from the general form by enforcing the compatibility conditions and displacement boundary conditions a priori. The conditional stability of the kinematic formulation is the counterpart of the locking phenomenon in elastostatics and may be avoided, either by reduced order integration, or by utilizing a mixed formulation. Toward this end, a two field mixed formulation is presented, which follows from the general form, when the constitutive relations are satisfied a priori. A general set of the constraint equations are introduced into the kinematic and mixed formulations, using a specific choice of multipliers, which results in modified variational principles. Several simple examples concerning rigid body dynamics are presented. 15 refs., 18 figs.

More Details

Dynamic high-pressure studies of an electrothermal capillary

Benson, D.A.

This paper describes arc discharge tests conducted in a prepressurized, constant-volume pressure vessel to study arc behavior over a wide range of current densities, discharge durations and initial vessel pressures. This method allows controlled access to a wider range of conditions than those previously studied in capillary tests. We have investigated aspects of the radiative heat transfer by calculating the material opacity and mean free paths of photons for conditions typical of arc diagnostics. We also performed one-dimensional Eulerian hydrodynamic calculations of the boundary layer behavior in the radiative diffusion approximation. These calculations, which describe the radial mass flow and heat transfer in the absence of turbulent flow effects, show the characteristic times for equilibrium of the high-pressure arc. Finally, we describe progress on a promising means for increasing the mass flux from the capillary discharge through the use of chemically reactive media on the capillary walls. 20 refs., 7 figs.

More Details

Single event upset hardening techniques

Weaver, H.T.

Integrated circuit logic states are maintained by virtue of specific transistor combinations being either on'' (conducting) or off'' (nonconducting). High energy ion strikes on the microcircuit generate photocurrents whose primary detrimental effect is to make off'' transistors appear on,'' confusing the logic state and leading to single event upset (SEU). Protection against these soft errors is accomplished using either technology or circuit techniques, actions that generally impact yield and performance relative to unhardened circuits. We describe, and using circuit simulations analyze, a technique for hardening latches which requires combinations of technology and circuit modifications, but which provides SEU immunity without loss of speed. Specifically, a single logic state is hardened against SEU using technology methods and the information concerning valid states is then used to simplify hardened circuit design. The technique emphasizes some basic hardening concepts, ideas for which will be reviewed. 3 refs., 2 figs.

More Details

Processing experiments for development of high-efficiency silicon solar cells

Gee, James M.

Fabrication of high-efficiency silicon solar cells requires processing technology capable of maintaining long bulk carrier lifetime and low surface recombination. Development of long-lifetime processing techniques using experimental designs based on statistical methods is described. The first three experiments investigated pre-oxidation cleans, phosphorus gettering, and a comparison of different phosphorus diffusion sources. Optimal processing parameters were found to depend on type of silicon material. 2 refs., 2 figs., 2 tabs.

More Details

Properties and characterization of thin film ferroelectric capacitors for nonvolatile memories

Nasby, R.D.

Thin film ferroelectric materials are the basis for a new, promising IC nonvolatile memory technology. The primary material being studied for ferroelectric memories is PZT. One of the key factors in determining the feasibility of PZT ferroelectric memories for weapon or space applications is whether PZT ferroelectric technology can be integrated into a radiation-hardened CMOS or bipolar process. Sandia National Laboratories has a program to study ferroelectric/CMOS process integration issues. The primary goal of this program is to determine if radiation-hardened reliable ferroelectric/CMOS IC memories can be fabricated. This program includes both the fabrication and characterization of ferroelectric test capacitors. In this paper we will give a brief overview of the program, discuss techniques developed to characterize ferroelectric devices for retention and endurance, and give results on studies of fatigue and retention of capacitors.

More Details

Travelling wave Faraday effect fiber current sensors

Cernosek, Richard W.

A travelling wave Faraday effect fiber current sensor, consisting of a helical optical fiber coil immersed in a dielectric medium, has been demonstrated. Improved phase matching conditions have led to measured bandwidth enhancements of greater than a factor of four. Sensitive devices with multi-gigahertz bandwidths are possible using this technique. 7 refs., 3 figs.

More Details

Design of strictly positive real, fixed-order dynamic compensators

Proceedings of the IEEE Conference on Decision and Control

Jacobus, M.J.

The authors present sufficient conditions for the design of strictly positive real (SPR), fixed-order dynamic compensators. The primary motivation for designing SPR compensators is for application to positive real (PR) plants. When an SPR compensator is connected to a PR plant in a negative feedback configuration, the closed loop is guaranteed stable for arbitrary plant variations as long as the plant remains PR. Equations that are a modified form of the optimal projection equations, with the separation principle not holding in either the full- or reduced-order case, are given. A solution to the design equations in shown to exist when the plant is PR (or just stable). Finally, the closed-loop system consisting of a PR plant and an SPR compensator is shown to be S-structured Lyapunov stable.

More Details

A Nuisance Alarm Data System for evaluation of intrusion detectors

Ream, W.K.

A Nuisance Alarm Data System (NADS) was developed to gather long-term background alarm data on exterior intrusion detectors as part of their evaluation. Since nuisance alarms play an important part in the selection of intrusion detectors for use at Department of Energy (DOE) facilities, an economical and reliable way to monitor and record these alarms was needed. NADS consists of an IBM Personal Computer and printer along with other commercial units to communicate with the detectors, to gather weather data and to record video for assessment. Each alarm, its assessment and the weather conditions occurring at alarm time are placed into a database that is used in the evaluation of the detector. The operating software is written in Turbo Pascal for easy maintenance and modification. A portable system, based on the NADS design, has been built and shipped to other DOE locations to do on-site alarm monitoring. This has been valuable for the comparison of different detectors in the on-site environment and for testing new detectors when the appropriate conditions do not exist or cannot be simulated at the Exterior Intrusion Detection Testbed.

More Details

Implementing QML for radiation hardness assurance

IEEE Transactions on Nuclear Science

Winokur, Peter S.

Statistical process control (SPC) of technology parameters relevant to radiation hardness, test structure to IC correlation, and extrapolation from laboratory to threat scenarios are keys to implementing QML for radiation hardness assurance in a cost-effective manner. Data from approximately 300 wafer lots fabricated in Sandia's 4/3-µm and CMOS IIIA (2-µm) technologies are used to demonstrate approaches to, and highlight issues associated with, implementing QML for radiation-hardened CMOS in space applications. An approach is demonstrated to implement QML for single-event upset (SEU) immunity on 16k SRAMs that involves relating values of feedback resistance to system error rates. It is seen that the process capability indices, Cp and Cpk, for the manufacture of 400 kΩ feedback resistors required to provide SEU tolerance do not conform to “6σ” quality standards. For total-dose, ΔVit shifts measured on transistors are correlated with circuit response in the space environment. SPC is illustrated for ΔVit, and violations of SPC rules are interpreted in terms of continuous improvement. Finally, design validation for SEU, and quality conformance inspections for total-dose, are identified as major obstacles to cost-effective QML implementation. Techniques and tools that will help QML provide real cost savings are identified as physical models, 3D device-plus-circuit codes, and improved design simulators. © 1990 IEEE

More Details

Effect of radiation-induced charge on 1/f noise in MOS devices

IEEE Transactions on Nuclear Science

Meisenheimer, Timothy L.

We have measured 1/f noise in MOS transistors as a function of gate and drain bias, total ionizing dose, and postirradiation biased annealing time. The transistors tested varied in size, radiation hardness, and process technology. The radiation-induced 1/f noise correlates strikingly with the oxide trap charge through irradiation and anneal, but not with interface-trap charge, for frequencies up to 10 kHz. This implies that oxide trapped charge is the pre-dominant factor which leads to the increased 1/f noise in irradiated MOS devices. © 1990 IEEE

More Details

A 2-dimensional laser radar imaging system for perimeter surveillance

Cooley, H.T.

A 2D-Laser Radar Imaging System consisting of a prototype 2D-Laser Radar Sensor and an Image Processing System is currently being developed as an intrusion detection system capable of immediate detection and quick assessment for perimeter security and surveillance. The objective of this system is to produce a thin laser wall as an invisible intrusion barrier. Since only a small space is needed to create a narrow laser radar wall, this system will work well where there is only limited or narrow zones available to create the secure perimeter. Images are created of objects which penetrate the laser radar wall for assessment and to determine the appropriate alarm response. Such a system can be used to protect against airborne threats from rooftop areas or to guard against ground threats across perimeter zones of critical facilities. This paper will discuss the operational concepts, the technology, and an initial performance of this prototype system. 2 refs., 6 figs.

More Details

SEU characterization and design dependence of the SA3300 microprocessor

IEEE Transactions on Nuclear Science

Sexton, F.W.

The SEU vulnerability of the SA3300 16-bit microprocessor has been characterized, and the effects of two different design revisions on error rate have been explored. We found that the threshold for upset depends on the data pattern written into the general purpose registers. With all bits in the general purpose registers set to logic one, a design with 2-µm n- and p-channel transistor lengths had a threshold LET of 35 MeV-cm2/mg at 25°C and 4.5 volt operation. With all zero's stored in the registers the upset threshold increased by more than a factor of two to 83 MeV-cm2/mg. A second design revision, with 1.25-µm and 1.75-µm n- and p-channel transistor lengths, respectively, was more vulnerable to upset, but exhibited a smaller dependence on logic state. Measured threshold LET was 23 and 35 MeV-cm2/mg with all one's and all zero's, respectively. Microprobe measurements using a pulsed Nd:YAG laser suggest that the observed pattern dependence for both design revisions is due to bipolar photocurrent in a vertical n+pn transistor. A slight temperature dependence was observed in both design revisions. This is consistent with the use of oversized restoring transistors to minimize SEU vulnerability rather than polysilicon feedback resistors. More recent data show thresholds above 120 MeV-cm2/mg with 80 kΩ feedback resistors. © 1990 IEEE

More Details
Results 100226–100250 of 100,993
Results 100226–100250 of 100,993
Top