The majority of all oil well footage drilled is in shales and other clay-bearing rocks. The mechanical strength of these formations usually is not an issue as regards their fast penetration by the drill bit. The difficulties associated with these formations arise due to the chemically reactive nature of such formations, causing the cuttings to stick to the bit. This causes a decrease in the rate of penetration of the drill bit and also has a detrimental effect on the state of the wellbore. This report presents a radical approach to preventing the adherence of shale cuttings to the bit. It consists of applying a direct electrical potential between the rock and the bit while drilling, while making the latter the cathode. Due to the process of electro-osmosis that occurs in shales, this results in the migration of a thin layer of water to the interface between the metal body (cathode) and the rock (anode). It has been demonstrated that this layer of water at the interface aids in the penetration of single-point indenters and also facilitates their withdrawal. Interfacial friction between a shale and a metal body was reduced, as was the tendency of shale cuttings to adhere to the metal surface. All of these combined to cause significant increases in the rate of penetration of a cathodic bit, as compared to the case when no potential was applied. It has been shown that when the bit was made the cathode, the maximum advantage was obtained when drilling conditions got worse, making it ideally suited for field applications. It was also shown that in the time intervals relevant to drilling operations, an amount of water sufficient to provide a coating on the bit was migrated out of a shale. It is believed that since the contact between the metal and the shale completes the electrical circuit to produce the driving force, this technique should work under most operating conditions. 63 refs.
Sandia National Laboratories, New Mexico, conducts the Utility Battery Storage Systems Program, which is sponsored by the US Department of Energy`s Office of Energy Management. The goal of this program is to assist industry in developing cost-effective battery systems as a utility resource option by 2000. Sandia is responsible for the engineering analyses, contracted development, and testing of rechargeable batteries and systems for utility energy storage applications. This report details the technical achievements realized during fiscal year 1994.
The purpose of this document is to describe a qualitative risk assessment process that supplements the requirements of DOE/AL 5481.1B. Although facility managers have a choice of assessing risk either quantitatively or qualitatively, trade offs are involved in making the most appropriate choice for a given application. The results that can be obtained from a quantitative risk assessment are significantly more robust than those results derived from a qualitative approach. However, the advantages derived from quantitative risk assessment are achieved at a greater expenditure of money, time and convenience. This document provides the elements of a framework for performing a much less costly qualitative risk assessment, while retaining the best attributes of quantitative methods. The approach discussed herein will; (1) provide facility managers with the tools to prepare consistent, site wide assessments, and (2) aid the reviewers who may be tasked to evaluate the assessments. Added cost/benefit measures of the qualitative methodology include the identification of mechanisms for optimally allocating resources for minimizing risk in an expeditious, and fiscally responsible manner.
The Plasma Technology Directory has two main goals: (1) promote, coordinate, and share plasma technology experience and equipment within the Department of Energy; and (2) facilitate technology transfer to the commercial sector where appropriate. Personnel are averaged first by Laboratory and next by technology area. The technology areas are accelerators, cleaning and etching deposition, diagnostics, and modeling.
This paper presents a concept for fusing 3-dimensional image reconnaissance data with LADAR imagery for aim point refinement. The approach is applicable to fixed or quasi-fixed targets. Quasi-fixed targets are targets that are not expected to be moved between the time of reconnaissance and the time of target engagement. The 3-dimensional image data is presumed to come from standoff reconnaissance assets tens to hundreds of kilometers from the target area or acquisitions prior to hostilities. Examples are synthetic aperture radar (SAR) or stereoprocessed satellite imagery. SAR can be used to generate a 3-dimensional map of the surface through processing of data acquired with conventional SAR acquired using two closely spaced, parallel reconnaissance paths, either airborne or satellite based. Alternatively, a specialized airborne SAR having two receiving antennas may be used for data acquisition. The data sets used in this analysis are: (1) LADAR data acquired using a Hughes-Danbury system flown over a portion of Kirtland AFB during the period September 15--16, 1993; (2) two pass interferometric SAR data flown over a terrain-dominated area of Kirtland AFB; (3) 3-dimensional mapping of an urban-dominated area of the Sandia National Laboratories and adjacent cultural area extracted from aerial photography by Vexcel Corporation; (4) LADAR data acquired at Eglin AFB under Wright Laboratory`s Advanced Technology Ladar System (ATLAS) program using a 60 {mu}J, 75 KHz Co{sub 2} laser; and (5) two pass interferometric SAR data generated by Sandia`s STRIP DCS (Data Collection System) radar corresponding to the ATLAS LADAR data. The cultural data set was used in the urban area rather than SAR because high quality interferometric SAR data were not available for the urban-type area.
Finite Element Analysis capability for application to welding has been developed and enhanced during a two year Cooperative Research and Development Agreement(CRADA) between Pratt & Whitney, United Technologies Research Center, and Sandia National Laboratories. Because of the nature of electron beam welding at Pratt & Whitney -- set-up is time consuming, the parts to be welded are complicated, and experimentation is costly -- finite element analysis has found many potential applications. The results of most interest in these analyses are the residual stress and final distortion of the component. The work has made use of the Sandia finite element codes JACQ3D, for thermal analysis, and JAS3D, for mechanical analysis. Both codes use an efficient, non-linear conjugate gradient solution technique, which enables large problems to be solved on engineering workstations. This presentation describes several technical challenges that were overcome in the application of the Sandia codes to this class of problems. Stress and distortion results predicted for an electron beam weld of a PW4000 gas turbine engine drum rotor will also be discussed.
Selecting a risk-based tool to aid in decision making is as much of a challenge as properly using the tool once it has been selected. Failure to consider customer and stakeholder requirements and the technical bases and differences in risk-based decision making tools will produce confounding and/or politically unacceptable results when the tool is used. Selecting a risk-based decisionmaking tool must therefore be undertaken with the same, if not greater, rigor than the use of the tool once it is selected. This paper presents a process for selecting a risk-based tool appropriate to a set of prioritization or resource allocation tasks, discusses the results of applying the process to four risk-based decision-making tools, and identifies the ``musts`` for successful selection and implementation of a risk-based tool to aid in decision making.
Safety is of paramount concern in todays high technology environment. Because of technological advances, there are numerous situations (high consequence operations) for which the implications of a safety failure are so severe that extreme attention to safety systems is essential. Some of those situations are: nuclear weapon detonation safety, nuclear reactor safety, dam safety, mass transit transportation safety, and hazardous materials transportation and handling safety. In each case, specific safety systems, human control, and administrative procedures have been designed to give a high level of assurance against disasters. In an overview sense, safety concepts can be divided into two broad approaches: active safety and passive safety. Active safety systems, in general, are based on the need for ``functioning`` elements (operating motors, operator action, etc.) and safety may be based in a large measure on ``reliability`` data (historical records of the operability success of components). Passive safety basically depends on non-functionality.
With the infusion of information technologies into product development and production processes, effective management of product data is becoming essential to modern production enterprises. When an enterprise-wide Product Data Manager (PDM) is implemented, PDM designers must satisfy the requirements of individual users with different job functions and requirements, as well as the requirements of the enterprise as a whole. Concern must also be shown for the interrelationships between information, methods for retrieving archival information and integration of the PDM into the product development process. This paper describes a user-driven approach applied to PDM design for an agile manufacturing pilot project at Sandia National Laboratories that has been successful in achieving a much faster design-to-production process for a precision electro mechanical surety device.
As industries position themselves for the competitive markets of today, and the increasingly competitive global markets of the 21st century, agility, or the ability to rapidly develop and produce new products, represents a common trend. Agility manifests itself in many different forms, with the agile manufacturing paradigm proposed by the Iacocca Institute offering a generally accepted, long-term vision. In its many forms, common elements of agility or agile manufacturing include: changes in business, engineering and production practices, seamless information flow from design through production, integration of computer and information technologies into all facets of the product development and production process, application of communications technologies to enable collaborative work between geographically dispersed product development team members and introduction of flexible automation of production processes. Industry has rarely experienced as dramatic an infusion of new technologies or as extensive a change in culture and work practices. Human factors will not only play a vital role in accomplishing the technical and social objectives of agile manufacturing. but has an opportunity to participate in shaping the evolution of industry paradigms for the 21st century.
The purpose of an intelligent alarm analysis system is to provide complete and manageable information to a central alarm station operator by applying alarm processing and fusion techniques to sensor information. This paper discusses the sensor fusion approach taken to perform intelligent alarm analysis for the Advanced Exterior Sensor (AES). The AES is an intrusion detection and assessment system designed for wide-area coverage, quick deployment, low false/nuisance alarm operation, and immediate visual assessment. It combines three sensor technologies (visible, infrared, and millimeter wave radar) collocated on a compact and portable remote sensor module. The remote sensor module rotates at a rate of 1 revolution per second to detect and track motion and provide assessment in a continuous 360` field-of-regard. Sensor fusion techniques are used to correlate and integrate the track data from these three sensors into a single track for operator observation. Additional inputs to the fusion process include environmental data, knowledge of sensor performance under certain weather conditions, sensor priority, and recent operator feedback. A confidence value is assigned to the track as a result of the fusion process. This helps to reduce nuisance alarms and to increase operator confidence in the system while reducing the workload of the operator.
Sandia National Laboratories faces institutional challenges that are unique in its history. Never before have the national laboratories been viewed so critically, and never before has their role been the subject of such study and debate. At the same time, the opporunities to render `exceptional service in the national interest` have never been greater. The business of Sandia today and into the foreseeable future will rely on a strong, integrated technical foundation, represented most fundamentally by its core competencies. While is is impossible to foresee precisely what missions Sandia will pursue many years from now, one thing is clear: Central to its service to the nation will be the application of science-based engineering skills to the stewardship of the nuclear weapons stockpile. Whether on not the nation ever builds a new nuclear weapon, those that remain in stockpile will require continuous stewardship based on the integration of scientific understanding with experienced systems engineering. Sandia`s steadfast commitment to DOE`s stockpile stewardship mission will also be evident in the production of limited numbers of certain vital weapon components as the weapons production complex is realigned. Complementing this enduring responsibility will be expanded missions in energy, environment, and economic competitiveness. The work for other federal agencies will be jointly sponsored under high-level agreements with DOE. Multi-institutional teams will become a common way of doing business. The multiprogram laboratory model will evolve toward a new model of multi-laboratory programs addressing major national needs. Sandia will be a distinct and important component of an integrated system of national laboratories.
Extreme UltraViolet Lithography (EUVL) seeks to apply radiation in a wavelength region centered near 13 nm to produce microcircuits having features sizes 0.1 micron or less. A critical requirement for the commercial application of this technology is the development of an economical, compact source of this radiation which is suitable for lithographic applications. A good candidate is a laser-plasma source, which is generated by the interaction of an intermediate intensity laser pulse (up to 10{sup 12} W/cm{sup 2}) with a metallic target. While such a source has radiative characteristics which satisfy the needs of an EUVL source, the debris generated during the laser-target interaction strikes at the economy of the source. Here, the authors review the use of concepts and computer modeling, originally developed for hypervelocity impact analysis, to study this problem.
Anderson, D.J.; Cranwell, R.M.; Iman, R.; Van Buren, P.D.
Environmental regulations are encouraging the development of new environmentally conscious manufacturing (ECNP processes. However, the quality and reliability of these processes and hardware produced must be understood prior to implementing these new technologies in factories. Furthermore, military hardware fabrication is governed by standards and specifications that frequently mandate the use of older, less environmentally friendly processes or materials, or prohibit the use of new ECM processes without advance military approvaL Sandia National Laboratories, with industrial and military partners, have developed methodologies for evaluating and qualifying new ECM processes for military and commercial applications, and have piloted these methodologies in qualifying new, low-residue soldering technologies and materials.
The characteristics of a piezoresistive accelerometer in shock environments are being studied at Sandia National Laboratories in the Mechanical Shock Testing Laboratory. A Hopkinson bar capability has been developed to extend our undemanding of the piezoresistive accelerometer, in two mechanical configurations, in the high frequency, high shock environments where measurements are being made. Two different Hopkinson bar materials are being used: Titanium and beryllium The in-axis performance of the piezoresistive accelerometer for frequencies of dc-10 kHz and shock magnitudes of up to 150,000 g as determined from measurements with a titanium Hopkinson bar are presented. The beryllium Hopkinson bar configuration is described. Preliminary in-axis characteristics of the piezoresistive accelerometer at a nominal shock level of 50,000 g for a frequency range of DC-30 kHz determined from the beryllium bar are presented.
The goal of assembly sequencing is to plan a feasible series of operations to construct a product from its individual parts. Previous research has thoroughly investigated assembly sequencing under the assumption that parts have nominal geometry. This paper considers the case where parts have toleranced geometry. Its main contribution is an efficient procedure that decides if a product admits an assembly sequence with infinite translations that is feasible for all possible instances of the components within the specified tolerances. If the product admits one such sequence, the procedure can also generate it. For the cases where there exists no such assembly sequence, another procedure is proposed which generates assembly sequences that are feasible only for some values of the toleranced dimensions. If this procedure produces no such sequence, then no instance of the product is assemblable. Finally, this paper analyzes the relation between assembly and disassembly sequences in the presence of toleranced parts. This work assumes a simple, but non-trivial tolerance language that falls short of capturing all imperfections of a manufacturing process. Hence, it is only one step toward assembly sequencing with toleranced parts.
There has been some interest lately in the need for ``authenticated signalling``, and the development of signalling specifications by the ATM Forum that support this need. The purpose of this contribution is to show that if authenticated signalling is required, then supporting signalling facilities for directory services (i.e. key management) are also required. Furthermore, this contribution identifies other security related mechanisms that may also benefit from ATM-level signalling accommodations. For each of these mechanisms outlined here, an overview of the signalling issues and a rough cut at the required fields for supporting Information Elements are provided. Finally, since each of these security mechanisms are specified by a number of different standards, issues pertaining to the selection of a particular security mechanism at connection setup time (i.e. specification of a required ``Security Quality of Service``) are also discussed.
A feasibility test on remote monitoring of unattended sensors was conducted by Sandia National Laboratories (SNL) and the Japan Atomic Energy Research Institute (JAERI) under a bilateral agreement between the U.S. Arms Control and Disarmament Agency (ACDA) and JAERI. The Containment and Surveillance Data Authenticated Communication (CASDAC) system developed by JAERI for nuclear safeguards and physical protection is a prototype system for remote monitoring of sensor status through the international telephone network. Sensor inputs to the CASDAC system are provided by prototype tamper-protected sensor enclosures developed by SNL on behalf of ACDA. The CASDAC system normally operates on a polling basis from the central control console at JAERI, but data transmission may also be initiated from the remote read unit at SNL when a sensor activation is detected. All transmission data are encrypted. Statistics concerning reliability, time delay for anomaly detection, and records of all sensor activations were accumulated since May 1992. This paper describes the objectives and preliminary evaluation of the accumulated data. The U.S. Defense Nuclear Agency (DNA) funded the experiment at SNL to obtain information about the potential of CASDAC for use in Chemical Weapons Convention (CWC) applications.
We describe a dynamic load-balancing strategy for parallel finite element methods with adaptive mesh (h-) and order (p-) refinement. The load-balancing algorithm is based on the tiling load-balancing system, where global balance in achieved by performing local balancing within overlapping neighborhoods of processors. Tiling is applied to each mesh level created by the adaptive h-refinement. Weights are used in the migration routines to reflect the nonuniform elemental work loads caused by adaptive p-refinement. The combination of adaptive refinement and tiling significantly reduces total execution time relative to fixed-mesh, fixed-order methods yielding comparable accuracy, as we demonstrate with experiments on an nCUBE/2.
Failure analysis is a critical element in the integrated circuit manufacturing industry. This paper reviews the changing role of failure analysis and describes major techniques employed in the industry today. Several advanced failure analysis techniques that meet the challenges imposed by advancements in integrated circuit technology are described and their applications are discussed. Future trends in failure analysis needed to keep pace with the continuing advancements in integrated circuit technology are anticipated.
Formation of Fe clusters in inverse micelles was studied. Iron salts are solubilized within the polar interior of inverse micelles, and addition of LiBH{sub 4} initiates reduction to produce monodisperse, nanometer-sized Fe based particles. The reaction sequence is sustained by material exchange between inverse micelles. Surfactant interface provides a spatial constraint on reaction volume, and reactions carried out in these micro-heterogeneous solutions produce colloidal sized particles (10--100 {Angstrom}) stabilized in solution against flocculation by surfactant. In this paper, the clusters were characterized using TEM, Moessbauer spectroscopy, electron diffraction, and x-ray photoelectron spectroscopy.
A technology demonstration that optimizes sampling strategies and real-time data collection was carried out at the Kirtland Air Force Base RB-11 Radioactive Burial Site, Albuquerque, New Mexico in August 1994. The project, which was funded by the Strategic Environmental Research and Development Program (SERDP), involved the application of a geostatistical-based {open_quotes}smart sampling{close_quotes} methodology and software with on-site field screening of soils for radiation, organic compounds and metals. The software, known as Plume{trademark}, was developed at Argonne National Laboratory as part of the DOE/OTD-funded Mixed Waste Landfill Integrated Demonstration (MWLID). The objective of the investigation was to compare an innovative Adaptive Sampling approach that stressed real-time decision-making with a conventional RCRA-driven site characterization carried out by the Air Force. The latter investigation used a standard drilling and sampling plan as mandated by the EPA. To make the comparison realistic, the same contractors and sampling equipment (Geoprobe{reg_sign} soil samplers) were used. In both investigations, soil samples were collected at several depths at numerous locations adjacent to burial trenches that contain low-level radioactive waste and animal carcasses. Neither study revealed the presence of contaminants appreciably above risk based action levels, indicating that minimal to no migration has occurred away from the trenches. The combination of Adaptive Sampling with field screening achieved a similar level of confidence compared to the RCRA investigation regarding the potential migration of contaminants at the site. By comparison, the Adaptive Sampling program drilled 28 locations (vs. 36 for the conventional investigation), collected 81 samples (vs. 163), and sent 15 samples (vs. 163) off-site for laboratory analysis. In addition, the field work took 3 1/2 days compared to 13 days for the RCRA investigation.
The A-primed (Agile Product Realization of Innovative electro-Mechanical Devices) project is defining and proving processes for agile product realization for the Department of Energy complex. Like other agile production efforts reported in the literature, A-primed uses concurrent engineering and information automation technologies to enhance information transfer. A unique aspect of our approach to agility is the qualification during development of a family of related product designs and their production processes, rather than a single design and its attendant processes. Applying engineering principles and statistical design of experiments, economies of test and analytic effort are realized for the qualification of the device family as a whole. Thus the need is minimized for test and analysis to qualify future devices from this family, thereby further reducing the design-to-production cycle time. As a measure of the success of the A-primed approach, the first design took 24 days to produce, and operated correctly on the first attempt. A flow diagram for the qualification process is presented. Guidelines are given for implementation, based on the authors experiences as members of the A-primed qualification team.
A method has been formulated and tested to provide laser weld schedules using a mathematical model and parameter optimization. This effort, on behalf of the Smartweld manufacturing initiative, seeks to provide: (1) laser power, (2) part travel speed, and (3) lens focal length to optimize weld process efficiency while constraining weld dimensions. Experimental data for three metals was fit to provide the mathematical model. Embedded material constants in the computational model allowed the extension to seven metals. A genetic algorithm, was used to accomplish the optimization. Lens focal length is a discrete variable and necessitated this type of algorithm. All coding was done in MATLAB and a graphical user interface was provided. Contour and surface plots, available through the interface, provide the analyst with insight as to optimum welds which are reachable within the problem-specified bounds on power, speed, and available focal lengths.