Publications

Results 96601–96625 of 100,993

Search results

Jump to search filters

Development of Green Box sensor module technologies for rail applications

Rey, D.

Results of a joint Sandia National Laboratories, University of New Mexico, and New Mexico Engineering Research Institute project to investigate an architecture implementing real-time monitoring and tracking technologies in the railroad industry is presented. The work, supported by the New Mexico State Transportation Authority, examines a family of smart sensor products that can be tailored to the specific needs of the user. The concept uses a strap-on sensor package, designed as a value-added component, integrated into existing industry systems and standards. Advances in sensor microelectronics and digital signal processing permit us to produce a class of smart sensors that interpret raw data and transmit inferred information. As applied to freight trains, the sensors` primary purpose is to minimize operating costs by decreasing losses due to theft, and by reducing the number, severity, and consequence of hazardous materials incidents. The system would be capable of numerous activities including: monitoring cargo integrity, controlling system braking and vehicle acceleration, recognizing component failure conditions, and logging sensor data. A cost-benefit analysis examines the loss of revenue resulting from theft, hazardous materials incidents, and accidents. Customer survey data are combined with the cost benefit analysis and used to guide the product requirements definition for a series of specific applications. A common electrical architecture is developed to support the product line and permit rapid product realization. Results of a concept validation, which used commercial hardware and was conducted on a revenue-generating train, are also reported.

More Details

Sandia Airspace Recording System (SARS) software reference manual

Tenney, J.L.

SARS is a data acquisition system designed to gather and process radar data from aircraft flights. A database of flight trajectories has been developed for Albuquerque, NM, and Amarillo, TX. The data is used for safety analysis and risk assessment reports. To support this database effort, Sandia developed a collection of hardware and software tools to collect and post process the aircraft radar data. This document describes the data reduction tools which comprise the SARS, and maintenance procedures for the hardware and software system.

More Details

Inside Sandia, April 1996

Locke, T.

Brief articles in this issue are entitled: New testing techniques, textiles on the information superhighway, and knowledge preservation; Structural health monitoring techniques and robust analysis tools assess aging and damaged structures; Sandia`s VCSELs (Vertical-Cavity Surface-Emitting Lasers): sparking a laser diode revolution; Fiber-optic instrumentation trims weeks off the wait for cervical cancer test results; DAMA (Demand Activated Manufacturing Architecture) project boosts competitiveness of US textile industry; SEAMIST (Science and Engineering Associates Membrane Instrumentation and Sampling Technique) cuts contamination cleanup costs; RePAVing the roads to the past (Relevant Point of Access Video); and Sandia receives DOE basic energy sciences award for sol-gel achievements.

More Details

Materials and processes research and the information highway

Hurd, Alan J.

A workshop was held on April 12 and 13, 1996, to provide a forum for gathering information pertinent to using the information highway (the Internet and the World Wide Web) for materials and processes (M&P) research. The workshop`s objectives were to identify the priority needs of materials and processes researchers that could be addressed through the Internet, to describe the relevant capabilities of the information highway, to review existing applications of the highway in materials research and related fields for lessons learned, and to identify potential opportunities and key issues. The workshop was planned and organized by the Committee on Materials and Processes Research and the Information Highway, which was established by the National Materials Advisory Board (NMAB) of the National Research Council (NRC). The workshop was requested and sponsored by the Defense Reliance Technology Panel for Advanced Materials.

More Details

Weapon foam accelerated aging using dynamic mechanical analysis

Rand, P.B.; Hance, B.G.

Rigid polyurethane foams are used for supports and as encapsulants for electronic assemblies in almost all weapon systems. Mechanical properties (storage, loss, rubbery, and glassy moduli) of three foams are being evaluated; the test scheme is illustrated. Aging tests are also being run on the long-term performance of foams being used in the Russian Fissile Material Container; there was no significant change in the glass transition temperature, glassy modulus, or rubbery modulus after one year of aging.

More Details

A comparison of on-axis and off-axis heliostat alignment strategies

Jones, Scott A.

Heliostat installation and alignment costs will be an important element in future solar power tower projects. The predicted annual performances of on- and-off axis strategies are compared for 95 m{sup 2} flat-glass heliostats and an external, molten-salt receiver. Actual approaches to heliostat alignment that have been used in the past are briefly discussed, and relative strengths and limitations are noted. The optimal approach can vary with the application.

More Details

An interative, probabilistic environmental decision analysis approach

Webb, Erik K.

The framework is versatile and the generalized approach has worked well for a suite of evaluations or as a foundation for evaluation tools including developing the SEDSS computer software system for evaluating site safety for EPA Superfund problems, NRC Low-Level Nuclear Waste facility siting, and UMTRA site remediation decisions; iteration through the performance assessment of the Greater Confinement Disposal Facility; and optimizing data collection for DNAPL problems. In particular, the SEDSS computer system makes a portion of these tools accessible for broad scale application. Development of both details of the process and computer tools to support individual steps continues.

More Details

Diamond and diamond-like carbon films for advanced electronic applications

Siegal, Michael P.

Aim of this laboratory-directed research and development (LDRD) project was to develop diamond and/or diamond-like carbon (DLC) films for electronic applications. Quality of diamond and DLC films grown by chemical vapor deposition (CVD) is not adequate for electronic applications. Nucleation of diamond grains during growth typically results in coarse films that must be very thick in order to be physically continuous. DLC films grown by CVD are heavily hydrogenated and are stable to temperatures {le} 400{degrees}C. However, diamond and DLC`s exceptional electronic properties make them candidates for integration into a variety of microelectronic structures. This work studied new techniques for the growth of both materials. Template layers have been developed for the growth of CVD diamond films resulting in a significantly higher nucleation density on unscratched or unprepared Si surfaces. Hydrogen-free DLC with temperature stability {le} 800{degrees}C has been developed using energetic growth methods such as high-energy pulsed-laser deposition. Applications with the largest system impact include electron-emitting materials for flat-panel displays, dielectrics for interconnects, diffusion barriers, encapsulants, and nonvolatile memories, and tribological coatings that reduce wear and friction in integrated micro-electro-mechanical devices.

More Details

Simulation-based computation of dose to humans in radiological environments

Davis, K.R.

The Radiological Environment Modeling System (REMS) quantifies dose to humans working in radiological environments using the IGRIP (Interactive Graphical Robot Instruction Program) and Deneb/ERGO simulation software. These commercially available products are augmented with custom C code to provide radiation exposure information to, and collect radiation dose information from, workcell simulations. Through the use of any radiation transport code or measured data, a radiation exposure input database may be formulated. User-specified IGRIP simulations utilize these databases to compute and accumulate dose to programmable human models operating around radiation sources. Timing, distances, shielding, and human activity may be modeled accurately in the simulations. The accumulated dose is recorded in output files, and the user is able to process and view this output. The entire REMS capability can be operated from a single graphical user interface.

More Details

Investigation of RADTRAN Stop Model input parameters for truck stops

Griego, N.R.

RADTRAN is a computer code for estimating the risks and consequences as transport of radioactive materials (RAM). RADTRAN was developed and is maintained by Sandia National Laboratories for the US Department of Energy (DOE). For incident-free transportation, the dose to persons exposed while the shipment is stopped is frequently a major percentage of the overall dose. This dose is referred to as Stop Dose and is calculated by the Stop Model. Because stop dose is a significant portion of the overall dose associated with RAM transport, the values used as input for the Stop Model are important. Therefore, an investigation of typical values for RADTRAN Stop Parameters for truck stops was performed. The resulting data from these investigations were analyzed to provide mean values, standard deviations, and histograms. Hence, the mean values can be used when an analyst does not have a basis for selecting other input values for the Stop Model. In addition, the histograms and their characteristics can be used to guide statistical sampling techniques to measure sensitivity of the RADTRAN calculated Stop Dose to the uncertainties in the stop model input parameters. This paper discusses the details and presents the results of the investigation of stop model input parameters at truck stops.

More Details

Expected residence time model

Smith, J.D.; Neuhauser, K.S.; Kanipe, F.L.

The Transportation Technology Department of Sandia National Laboratories develops analytical and computational tools for the US Department of Energy to assess the radiological consequences and risks from the transportation of radioactive materials by all modes. When large quantities of materials are to be transported movements may occur over an extended period of time in what is collectively referred as a ``shipping campaign``. Since the routes over which the shipments occur often remain the same, cumulative exposure to individuals inhabiting the population zones adjacent to the transport links must be estimated. However, individuals do not remain in the same residences throughout their lifetimes and, in fact, move quite often. To appropriately allocate exposures among populations over extended periods of time, perhaps years, requires a model that accounts for three population categories; (1) the original populations residing in the areas adjacent to the transport links, (2) individuals moving out and (3) individuals moving into residences in the designated areas. The model described here accounts for these conditions and will be incorporated as a user option in the RADTRAN computer code for transportation consequence and risk analysis (Reference 1). RADTRAN is a computer code for estimating the consequences and risks associated with the transport of radioactive materials.

More Details

Developing electronic textbooks

Ratner, J.A.

This paper discusses a new approach to the development of engineering education materials. The ``Electronic Textbook`` represents the logical progression of the printed textbook in the Electronic Age. The concept behind this approach is simple; to place all of the information contained in a textbook in electronic form. Currently, paper texts exist on the market with electronic supplements, however, this Electronic Textbook would include supplements fully integrated in the whole text. The computer hardware and software needed to make this advance possible have existed for nearly ten years, and they have been readily available to engineering educators and students for over three years. Computer based ``tools`` in engineering textbooks as are prevalent today range from computer styled algorithms and code snippets, to fully developed software applications with graphical user interfaces on floppy disks attached to the back covers of books. The next logical step in publishing is to dispense with the paper book entirely, by distributing textbooks via electronic media such as CD-ROM. Electronic Textbooks use the full range of multi-media technologies in the learning and teaching process including video clips, computer animations and fully functional numerical engines as integral parts of the textbook material. This is very appealing since interactive media provide teaching tools that appeal to divergent learning styles. The advantages of Electronic Textbooks lead to several challenges. Special attention must be paid to the development of user interfaces; navigation is of particular importance when non- linear exploration is encouraged. These issues are being addressed at the Sandia National Laboratories by an electronic documentation development team. This team includes experts in engineering, in human factors, and in computer hardware and software development. Guidelines for the development of electronic textbooks based on the experiences of this team are provided.

More Details

A range algorithm for ground penetrating radar

Caffey, Thurlow W.H.

A range-to-target algorithm for application to targets which exhibit a crude hyperbolic wiggle trace is described. The current practice is to use the apex time of the hyperbolic response together with an estimate of the propagation velocity to furnish the range. This new algorithm minimizes a difference function over a velocity search interval to provide the range. Examples for a variety of media, targets, range, and operating frequency are given for both simulated data and actual field data provided by others. Generally, the range is within 5% of the true value when known, or is consistent with values furnished by others.

More Details

Ion exchange performance of commercial crystalline silicotitanates for cesium removal

Miller, James E.

A new class of inorganic ion exchangers called crystalline silicotitanates (CST), invented by researchers at Sandia National Laboratories and Texas A&M University, has been commercialized in a joint Sandia-UOP effort. The original developmental materials exhibited high selectivity for the ion exchange of cesium, strontium, and several other radionuclides from highly alkaline solutions containing molar concentrations of Na{sup +}. The materials also showed excellent chemical and radiation stability. Together, the high selectivity and stability of the CSTs made them excellent candidates for treatment of solutions such as the Hanford tank supernates and other DOE radwastes. Sandia National Laboratories and UOP have teamed under a Cooperative Research and Development Agreement (CRADA) to develop CSTs in the powdered form and in an engineered form suitable for column ion exchange use. A continuous-flow, column ion exchange process is expected to be used to remove Cs and other radionuclides from the Hanford supernatant. The powder material invented by the Sandia and Texas A&M team consists of submicron-size particles. It is not designed for column ion exchange but may be used in other applications.

More Details

A new parallel algorithm for contact detection in finite element methods

Hendrickson, Bruce A.

In finite-element, transient dynamics simulations, physical objects are typically modeled as Lagrangian meshes because the meshes can move and deform with the objects as they undergo stress. In many simulations, such as computations of impacts or explosions, portions of the deforming mesh come in contact with each other as the simulation progresses. These contacts must be detected and the forces they impart to the mesh must be computed at each timestep to accurately capture the physics of interest. While the finite-element portion of these computations is readily parallelized, the contact detection problem is difficult to implement efficiently on parallel computers and has been a bottleneck to achieving high performance on large parallel machines. In this paper we describe a new parallel algorithm for detecting contacts. Our approach differs from previous work in that we use two different parallel decompositions, a static one for the finite element analysis and dynamic one for contact detection. We present results for this algorithm in a parallel version of the transient dynamics code PRONTO-3D running on a large Intel Paragon.

More Details

Evaluation of the tratment of metal-EDTA complexes using Ti0{sub 2} photocatalysis

Prairie, Michael R.

This study has demonstrated the feasibility of TiO{sub 2} photocatalysis to treat EDTA and several metal-EDTA complexes that can be found in industrial wastewaters. For the EDTA complexes of metals capable of photodeposition, such as Cu and Pb, certain reaction conditions were shown to facilitate the simultaneous complex degradation and photodeposition of these metals onto the catalyst. With metals that do not easily photodeposit, such as Ni and Cd, it is shown that the complex degradation is still facilitated, and can enhance other metals removal processes after photocatalytic treatment. Because the treatment of these metal-EDTA complexes typically requires special measures, there may exist situations where TiO{sub 2} photocatalysis could actually be the preferred method of treatment. However, its use should be compared economically to other more established advanced oxidation technologies. This necessity is demonstrated in the economic comparison to ozone treatment for EDTA degradation alone, where ozone treatment appears to be the clear choice in this application.

More Details

A general method for the efficient selection of sampling locations for problems in environmental restoration

Rutherford, Brian

Problems in environmental restoration that involve detecting or monitoring contamination or site characterization often benefit from procedures that help select sampling or drilling locations for obtaining meaningful data that support the analysis. One example of this type of procedure is a spatial sampling program that will ``automatically`` (based on the implementation of a computer algorithm) guide an iterative investigation through the process of site characterization at a minimal cost to determine appropriate remediation activities. In order to be effective, such a procedure should translate site and modeling uncertainties into terms that facilitate comparison with regulations and should also provide a methodology that will lead to an efficient sampling plan over the course of the analysis. In this paper, a general framework is given that can accomplish these objectives and can be applied to a wide range of environmental restoration applications. The methodology is illustrated using an example where soil samples support the characterization of a chemical waste landfill area.

More Details

High microwave power ECR etching of III-V semiconductors in CH{sub 4}/H{sub 2}/Ar

Shul, Randy J.

Etch rates up to 7000{angstrom}/min for InP and 3500{angstrom}/min for GaAs are obtained for high microwave power (1000W) CH{sub 4}/H{sub 2}/Ar Electron Cyclotron Resonance plasma etching. Preferential loss of the group V element leads to nonstoichiometric, unacceptably rough surfaces on In-based binary semiconductors at microwave powers {ge}400W, regardless of plasma composition. Both Ga- and Al-based materials retain smooth, stoichiometric surfaces even at I000W, but the rates are still much slower than for C1{sub 2} plasma chemistries. The results suggest that CH{sub 4}/H{sub 2} plasmas are not well suited to ECR systems operating at high powers.

More Details

Simulation of nonlinear strutures with artificial neural networks

Paez, Thomas L.

Structural system simulation is important in analysis, design, testing, control, and other areas, but it is particularly difficult when the system under consideration is nonlinear. Artificial neural networks offer a useful tool for the modeling of nonlinear systems, however, such modeling may be inefficient or insufficiently accurate when the system under consideration is complex. This paper shows that there are several transformations that can be used to uncouple and simplify the components of motion of a complex nonlinear system, thereby making its modeling and simulation a much simpler problem. A numerical example is also presented.

More Details

Drill pipe protector development

Thomerson, C.; Kenne, R.; Wemple, R.P.

The Geothermal Drilling Organization (GDO), formed in the early 1980s by the geothermal industry and the U.S. Department of Energy (DOE) Geothermal Division, sponsors specific development projects to advance the technologies used in geothermal exploration, drilling, and production phases. Individual GDO member companies can choose to participate in specific projects that are most beneficial to their industry segment. Sandia National Laboratories is the technical interface and contracting office for the DOE in these projects. Typical projects sponsored in the past have included a high temperature borehole televiewer, drill bits, muds/polymers, rotary head seals, and this project for drill pipe protectors. This report documents the development work of Regal International for high temperature geothermal pipe protectors.

More Details

X-ray emission from a high-atomic-number z-pinch plasma created from compact wire arrays

Sanford, Thomas W.L.

Thermal and nonthermal x-ray emission from the implosion of compact tungsten wire arrays, driven by 5 MA from the Saturn accelerator, are measured and compared with LLNL Radiation-Hydro-Code (RHC) and SNL Hydro-Code (HC) numerical models. Multiple implosions, due to sequential compressions and expansions of the plasma, are inferred from the measured multiple x-radiation bursts. Timing of the multiple implosions and the thermal x-ray spectra measured between 1 and 10 keV are consistent with the RHC simulations. The magnitude of the nonthermal x-ray emission measured from 10 to 100 keV ranges from 0.02 to 0.08% of the total energy radiated and is correlated with bright-spot emission along the z-axis, as observed in earlier Gamble-11 single exploding-wire experiments. The similarities of the measured nonthermal spectrum and bright-spot emission with those measured at 0.8 MA on Gamble-II suggest a common production mechanism for this process. A model of electron acceleration across magnetic fields in highly-collisional, high-atomic-number plasmas is developed, which shows the existence of a critical electric field, E{sub c}, below which strong nonthermal electron creation (and the associated nonthermal x rays) do not occur. HC simulations show that significant nonthermal electrons are not expected in this experiment (as observed) because the calculated electric fields are at least one to two orders-of-magnitude below E{sub c}. These negative nonthermal results are confirmed by RHC simulations using a nonthermal model based on a Fokker-Plank analysis. Lastly, the lower production efficiency and the larger, more irregular pinch spots formed in this experiment relative to those measured on Gamble II suggest that implosion geometries are not as efficient as single exploding-wire geometries for warm x-ray production.

More Details

Final report for the protocol extensions for ATM Security Laboratory Directed Research and Development Project

Tarman, Thomas D.

This is the summary report for the Protocol Extensions for Asynchronous Transfer Mode project, funded under Sandia`s Laboratory Directed Research and Development program. During this one-year effort, techniques were examined for integrating security enhancements within standard ATM protocols, and mechanisms were developed to validate these techniques and to provide a basic set of ATM security assurances. Based on our experience during this project, recommendations were presented to the ATM Forum (a world-wide consortium of ATM product developers, service providers, and users) to assist with the development of security-related enhancements to their ATM specifications. As a result of this project, Sandia has taken a leading role in the formation of the ATM Forum`s Security Working Group, and has gained valuable alliances and leading-edge experience with emerging ATM security technologies and protocols.

More Details
Results 96601–96625 of 100,993
Results 96601–96625 of 100,993
Top