Additive manufacturing has established itself to be advantageous beyond small-scale prototyping, now supporting full-scale production of components for a variety of applications. Despite its integration across industries, marine renewable energy technology is one largely untapped application with potential to bolster clean energy production on the global scale. Wave energy converters (WEC) are one specific facet within this realm that could benefit from AM. As such, wire arc additive manufacturing (WAAM) has been identified as a practical method to produce larger scale marine energy components by leveraging cost-effective and readily available A36 steel feedstock material. The flexibility associated with WAAM can benefit production of WEC by producing more complex structural geometries that are challenging to produce traditionally. Additionally, for large components where fine details are less critical, the high deposition rate of WAAM in comparison to traditional wrought techniques could reduce build times by an order of magnitude. In this context of building and supporting WEC, which experience harsh marine environments, an understanding of performance under large loads and corrosive environments must be understood. Hence, WAAM and wrought A36 steel tensile samples were manufactured, and mechanical properties compared under both dry and corroded conditions. The unique microstructure created via the WAAM process was found to directly correlate to the increased ultimate tensile and yield strength compared to the wrought condition. Static corrosion testing in a simulated saltwater environment in parallel with electrochemical testing highlighted an outperformance of corroded WAAM A36 steel than wrought, despite having a slighter higher corrosion rate. Ultimately, this study shows how marine energy systems may benefit from additive manufacturing components and provides a foundation for future applications of WAAM A36 steel.
Highlights Novel protocol for extracting knowledge from previously performed Finite Element corrosion simulations using machine learning. Obtain accurate predictions for corrosion current 5 orders of magnitude faster than Finite Element simulations. Accurate machine learning based model capable of performing an effective and efficient search over the multi-dimensional input space to identify areas/zones where corrosion is more (or less) noticeable.
The development of additively-manufactured (AM) 316L stainless steel (SS) using laser powder bed fusion (LPBF) has enabled near net shape components from a corrosion-resistant structural material. In this article, we present a multiscale study on the effects of processing parameters on the corrosion behavior of as-printed surfaces of AM 316L SS formed via LPBF. Laser power and scan speed of the LPBF process were varied across the instrument range known to produce parts with >99 % density, and the macroscale corrosion trends were interpreted via microscale and nanoscale measurements of porosity, roughness, microstructure, and chemistry. Porosity and roughness data showed that porosity φ decreased as volumetric energy density Ev increased due to a shift in the pore formation mechanism and that roughness Sq was due to melt track morphology and partially fused powder features. Cross-sectional and plan-view maps of chemistry and work function ϕs revealed an amorphous Mn-silicate phase enriched with Cr and Al that varied in both thickness and density depending on Ev. Finally, the macroscale potentiodynamic polarization experiments under full immersion in quiescent 0.6 M NaCl showed significant differences in breakdown potential Eb and metastable pitting. In general, samples with smaller φ and Sq values and larger ϕs values and homogeneity in the Mn-silicate exhibited larger Eb. The porosity and roughness effects stemmed from an increase to the overall number of initiation sites for pitting, and the oxide phase contributed to passive film breakdown by acting as a crevice former or creating a galvanic couple with the SS.
Stainless steels are susceptible to localized forms of corrosion attack, such as pitting. The size and lifetime of a nucleated pit can vary, depending on a critical potential or current density criterion, which determines if the pit repassivates or continues growing. This work uses finite element method (FEM) modeling to compare the critical pit radii predicted by thermodynamic and kinetic repassivation criteria. Experimental electrochemical boundary conditions are used to capture the active pit kinetics. Geometric and environmental parameters, such as the pit shape and size (analogous to additively manufactured lack-of-fusion pores), solution concentration, and water layer thickness were considered to assess their impact on the pit repassivation criterion. The critical pit radius (the transition point from stable growth to repassivation) predicted for a hemispherical pit was larger when using the repassivation potential (Erp) criteria, as opposed to the current density criteria (pit stability product). Including both the pit stability product and Erp into its calculations, the analytical maximum pit model predicted a critical radius two times more conservative than the FEA approach, under the conditions studied herein. The complex pits representing lack-of-fusion pores were shown to have minimal impact on the critical radius in atmospheric conditions.
Residual stress is a contributor to stress corrosion cracking (SCC) and a common byproduct of additive manufacturing (AM). Here the relationship between residual stress and SCC susceptibility in laser powder bed fusion AM 316L stainless steel was studied through immersion in saturated boiling magnesium chloride per ASTM G36-94. The residual stress was varied by changing the sample height for the as-built condition and additionally by heat treatments at 600°C, 800°C, and 1,200°C to control, and in some cases reduce, residual stress. In general, all samples in the as-built condition showed susceptibility to SCC with the thinner, lower residual stress samples showing shallower cracks and crack propagation occurring perpendicular to melt tracks due to local residual stress fields. The heat-treated samples showed a reduction in residual stress for the 800°C and 1,200°C samples. Both were free of cracks after >300 h of immersion in MgCl2, while the 600°C sample showed similar cracking to their as-built counterpart. Geometrically necessary dislocation (GND) density analysis indicates that the dislocation density may play a major role in the SCC susceptibility.