Publications

Results 97476–97500 of 100,993

Search results

Jump to search filters

An optically-triggered semiconductor switch for high power laser beams

Chow, Weng W.

The work involves research leading to an optically triggered switch for a high power laser pulse. The switch uses a semiconductor heterostructure whose optical properties are modified by a low power laser trigger such as a laser diode. Potential applications include optical control of pulsed power systems, control of medical lasers and implementation of security features in optical warhead architectures.

More Details

Velocity boundary conditions for vorticity formulations of the incompressible Navier-Stokes equations

Kempka, Steven N.

formulation to satisfy velocity boundary conditions for the vorticity form of the incompressible, viscous fluid momentum equations is presented. The tangential and normal components of the velocity boundary condition are satisfied simultaneously by creating vorticity adjacent to boundaries. The newly created vorticity is determined using a kinematical formulation which is a generalization of Helmholtz` decomposition of a vector field. Though it has not been generally recognized, these formulations resolve the over-specification issue associated with creating voracity to satisfy velocity boundary conditions. The generalized decomposition has not been widely used, apparently due to a lack of a useful physical interpretation. An analysis is presented which shows that the generalized decomposition has a relatively simple physical interpretation which facilitates its numerical implementation. The implementation of the generalized decomposition is discussed in detail. As an example the flow in a two-dimensional lid-driven cavity is simulated. The solution technique is based on a Lagrangian transport algorithm in the hydrocode ALEGRA. ALEGRA`s Lagrangian transport algorithm has been modified to solve the vorticity transport equation and the generalized decomposition, thus providing a new, accurate method to simulate incompressible flows. This numerical implementation and the new boundary condition formulation allow vorticity-based formulations to be used in a wider range of engineering problems.

More Details

Dynamic pulse buckling of cylindrical shells under axial impact: A comparison of 2D and 3D finite element calculations with experimental data

Hoffman, Edward L.

A series of tests investigating dynamic pulse buckling of a cylindrical shell under axial impact is compared to several 2D and 3D finite element simulations of the event. The purpose of the work is to investigate the performance of various analysis codes and element types on a problem which is applicable to radioactive material transport packages, and ultimately to develop a benchmark problem to qualify finite element analysis codes for the transport package design industry. Four axial impact tests were performed on 4 in-diameter, 8 in-long, 304 L stainless steel cylinders with a 3/16 in wall thickness. The cylinders were struck by a 597 lb mass with an impact velocity ranging from 42.2 to 45.1 ft/sec. During the impact event, a buckle formed at each end of the cylinder, and one of the two buckles became unstable and collapsed. The instability occurred at the top of the cylinder in three tests and at the bottom in one test. Numerical simulations of the test were performed using the following codes and element types: PRONTO2D with axisymmetric four-node quadrilaterals; PRONTO3D with both four-node shells and eight-node hexahedrons; and ABAQUS/Explicit with axisymmetric two-node shells and four-node quadrilaterals, and 3D four-node shells and eight-node hexahedrons. All of the calculations are compared to the tests with respect to deformed shape and impact load history. As in the tests, the location of the instability is not consistent in all of the calculations. However, the calculations show good agreement with impact load measurements with the exception of an initial load spike which is proven to be the dynamic response of the load cell to the impact. Finally, the PRONIT02D calculation is compared to the tests with respect to strain and acceleration histories. Accelerometer data exhibited good qualitative agreement with the calculations. The strain comparisons show that measurements are very sensitive to gage placement.

More Details

Characterization of polyurethane systems which contain low levels of free TDI

Thomas, Edward V.

EN-7, EN-8, and EN-9 are polyurethane systems that are used in numerous applications in the Department of Energy complex. These systems contain high levels of toluene diisocyanate (TDI). Currently, TDI is being treated as a suspect human carcinogen within the Department of Energy complex. This report documents the results of a material characterization study of three polyurethane systems that contain low levels of free (potentially airborne) TDI. The characterization has been accomplished by performing a set of statistically designed experiments. The purpose of these experiments is to explore the effects of formulation and cure schedule on various material properties. In general, the material properties (pot life, glass transition temperature, hardness, and tear strength) were relatively insensitive to variation in the cure schedule. On the other hand, variation in curative level had measurable effects on material properties for the polyurethane systems studied. Furthermore, the material properties of the three low-free-TDI polyurethane systems were found to be comparable or superior (for certain curative levels) to commonly-used polyurethane systems. Thus, these low-free-TDI systems appear to be viable candidates for applications where a polyurethane is needed.

More Details

DOE`s planning process for mixed low-level waste disposal

Chu, Sze-Tai Y.

A disposal planning process was established by the Department of Energy (DOE) Mixed Low-Level Waste (MLLW) Disposal Workgroup. The process, jointly developed with the States, includes three steps: site-screening, site-evaluation, and configuration study. As a result of the screening process, 28 sites have been eliminated from further consideration for MLLW disposal and 4 sites have been assigned a lower priority for evaluation. Currently 16 sites are being evaluated by the DOE for their potential strengths and weaknesses as MLLW disposal sites. The results of the evaluation will provide a general idea of the technical capability of the 16 disposal sites; the results can also be used to identify which treated MLLW streams can be disposed on-site and which should be disposed of off-site. The information will then serve as the basis for a disposal configuration study, which includes analysis of both technical as well as non-technical issues, that will lead to the ultimate decision on MLLW disposal site locations.

More Details

Comprehensive numerical model for cw vertical-cavity surface-emitting lasers

Hadley, G.R.

The authors present a comprehensive numerical model for vertical-cavity surface-emitting lasers that includes all major processes effecting cw operation of axisymmetric devices. In particular, the model includes a description of the 2D transport of electrons and holes through the cladding layers to the quantum well(s), diffusion and recombination processes of these carriers within the wells, the 2D transport of heat throughout the device, and a multi-lateral-mode effective index optical model. The optical gain acquired by photons traversing the quantum wells is computed including the effects of strained band structure and quantum confinement. They employ the model to predict the behavior of higher-order lateral modes in proton-implanted devices, and to provide an understanding of index-guiding in devices fabricated using selective oxidation.

More Details

Multivariate classification of BPSG thin films using Mahalanobis distances

Haaland, David M.

Infrared absorption spectra of borophosphosilicate glass (BPSG) thin films were collected to develop a rapid classification method for determining if the films are within the desired specifications. Classification of samples into good and bad categories was performed using principal component analysis applied to the spectra. Mahalanobis distances were used as the classification metric. The highest overall percentage of correct classification of samples based upon their spectra was 91.6%.

More Details

Cesium/oxide interactions for ultrathin films on {alpha}-Al{sub 2}O{sub 3}(0001) and {alpha}-Al{sub 2}O{sub 3}(1{bar 1}02)

Zavadil, Kevin R.

The interaction of cesium at the (0001) and (1{bar 1}02) surfaces of sapphire has been investigated using a variety of surface analytical techniques. Reflection mass spectrometric measurements yield initial Cs adsorption probabilities of 0.9 and 0.85 for the unreconstructed (0001) and (1{bar 1}02) surfaces, respectively. The adsorption probability decreases dramatically for these surfaces at critical Cs coverages of 2.O {times} 10{sup 14} and 3.4 {times} 10{sup 14} atoms/cm{sup 2}, respectively. Thermally induced reconstruction of the (0001) surface to form an oxygen deficient surface results in a decrease in the initial probability and capacity for Cs adsorption. Low energy electron diffraction (LEED) demonstrates that an intermediate, mixed domain surface yields an initial adsorption probability of 0.5 while a ({radical}31 {times} {radical}31) R {plus_minus} 9{degree} reconstructed surface yields a value of 0.27. Thermal desorption mass spectrometry (TDMS) shows that surface reconstruction eliminates the high binding energy states of Cs (2.7 eV/atom), consistent with the observed changes in adsorption probability. In contrast, reconstruction of the (1{bar 1}02) surface produces only minor changes in Cs adsorption. X-ray photoelectron spectroscopy (XPS) indicates that no formal reductive/oxidative chemistry takes place at the interface. We interpret the facile adsorption and strong binding of Cs on sapphire to result from Cs interacting with coordinatively unsaturated oxygen.

More Details

Functionalized block copolymers as adhesion promoters

Kent, Michael S.

The goal of this work is to develop novel functionalized block copolymers to promote adhesion at inorganic substrate/polymer interfaces. We envision several potential advantages of functionalized block copolymers over small molecule coupling agents. Greater control over the structure of the interphase region should result through careful design of the backbone of the copolymer. The number of chains per area, the degree of entanglement between the copolymer and the polymer matrix, the number of sites per chain able to attach to the substrate, and the hydrophobicity of the interphase region can all be strongly affected by the choice of block lengths and the monomer sequence. In addition, entanglement between the copolymer and the polymer matrix, if achieved, should contribute significantly to adhesive strength. Our program involves four key elements: the synthesis of suitable functionalized block copolymers, characterization of the conformation of the copolymers at the interface by neutron reflectivity and atomic force microscopy, characterization of the degree of bonding by spectroscopy, and measurement of the mechanical properties of the interface. In this paper we discuss block copolymers designed as adhesion promoters for the copper/epoxy interface. We have synthesized a diblock with one block containing imidazole groups to bond to copper and a second block containing secondary amines to react with the epoxy matrix. We have also prepared a triblock copolymer containing a hydrophobic middle block. Below we describe the synthesis of the block copolymers by living, ring-opening metathesis polymerization (ROMP) and the first characterization data obtained by neutron reflectivity.

More Details

New developments for sol-gel film and fiber processing

Hurd, A.J.

New insights into the development of microstructure in sol-gel films have recently been revealed by several diagnostic techniques, including imaging ellipsometry, {open_quotes}chemical imaging{close_quotes} by fluorescent tracers, light scattering from capillary waves, and finite-element modeling. The evolution of porosity during the continuous transition from dilute sol to porous solid in restricted geometries such as films and fibers is becoming clearer through fundamental understanding of evaporation dynamics and capillarity.

More Details

Many-body effects in semiconductor lasers

Chow, Weng W.

A microscopic theory, that is based on the coupled Maxwell-semiconductor-Bloch equations, is used to investigate the effects of many-body Coulomb interactions in semiconductor laser devices. This paper describes two examples where the many-body effects play important roles. Experimental data supporting the theoretical results are presented.

More Details

Health monitoring of operational structures -- Initial results

James, G.; Mayes, R.; Carne, T.; Simmermacher, T.; Goodding, J.

Two techniques for damage localization (Structural Translational and Rotational Error Checking -- STRECH and MAtriX COmpletioN -- MAXCON) are described and applied to operational structures. The structures include a Horizontal Axis Wind Turbine (HAWT) blade undergoing a fatigue test and a highway bridge undergoing an induced damage test. STRECH is seen to provide a global damage indicator to assess the global damage state of a structure. STRECH is also seen to provide damage localization for static flexibility shapes or the first mode of simple structures. MAXCON is a robust damage localization tool using the higher order dynamics of a structure. Several options arc available to allow the procedure to be tailored to a variety of structures.

More Details

Laser Tracker III: Sandia National Laboratories` third generation laser tracking system

Patrick, D.

At Sandia Labs` Coyote Canyon Test Complex, it became necessary to develop a precision single station solution to provide time space position information (tspi) when tracking airborne test vehicles. Sandia`s first laser tracker came on line in 1968, replacing the fixed camera technique for producing trajectory data. This system shortened data reduction time from weeks to minutes. Laser Tracker 11 began operations in 1982, replacing the original tracker. It incorporated improved optics and electronics, with the addition of a microprocessor-based real-time control (rtc) system within the main servo loop. The rtc added trajectory prediction with the loss of adequate tracking signal and automatic control of laser beam divergence according to target range. Laser Tracker III, an even more advanced version of the systems, came on line in 1990. Unlike LTII, which is mounted in a trailer and must by moved by a tractor, LTIII is mounted on its own four-wheel drive carrier. This allows the system to be used at even the most remote locations. It also incorporated improved optics and electronics with the addition of absolute ranging, acquisition on the fly, and automatic transition from manual Joystick tracking to laser tracking for aircraft tests. LTIII provides a unique state of the art tracking capability for missile, rocket sled, aircraft, submunition, and parachute testing. Used in conjunction with LTII, the systems together can provide either simultaneous or extended range tracking. Mobility, accuracy, reliability, and cost effectiveness enable these systems to support a variety of testing at Department of Energy and Department of Defense ranges.

More Details

Polarization characteristics, control, and modulation of vertical-cavity surface emitting lasers

Choquette, Kent D.

The gain-dependent polarization properties of vertical-cavity surface emitting lasers and methods for polarization control and modulation are discussed. The partitioning of power between the two orthogonal eigen polarizations is shown to depend upon the relative spectral alignment of the nondegenerate polarization cavity resonances with the laser gain spectrum. A dominant polarization can thus be maintained by employing a blue-shifted offset of the peak laser gain relative to the cavity resonance wavelength. Alternatively, the polarization can be controlled through use of anisotropic transverse cavity geometries. The orthogonal eigen polarizations are also shown to enable polarization modulation. By exploiting polarization switching transitions in cruciform lasers, polarization modulation of the fundamental mode up to 50 MHz is demonstrated. At lower modulation frequencies, complementary digital polarized output or frequency doubling of the polarized output is obtained. Control and manipulation of vertical-cavity laser polarization may prove valuable for present and future applications.

More Details

Comparison of lower-frequency (<1000 Hz) downhole seismic sources for use at environmental sites

Elbring, Gregory J.

In conjunction with crosswell seismic surveying being done at the Hanford Site in south-central Washington, four different downhole seismic sources have been tested between the same set of boreholes. The four sources evaluated were the Bolt airgun, the OYO-Conoco orbital vibrator, and two Sandia-developed vertical vibrators, one pneumatically-driven, and the other based on a magnetostrictive actuator. The sources generate seismic energy in the lower frequency range of less than 1000 Hz and have different frequency characteristics, radiation patterns, energy levels, and operational considerations. Collection of identical data sets with all four sources allows the direct comparison of these characteristics and an evaluation of the suitability of each source for a given site and target.

More Details

Using high-density magnetic and electromagnetic data for waste site characterization: A case study

Cochran, John R.

Magnetometers are frequently used to characterize hazardous waste sites. Due to cost and time considerations, data are typically collected on a coarse grid with nodes on 3 to 6 meter (m) centers. Hardware and software are now available which allow the rapid and cost effective collection of information on a much finer sampling grid. In this paper we present and compare total field magnetometery data collected on 3 m centers to total field magnetometery data collected on a grid with centers of 0.5 m or less. We also compare the magnetometery data to time-domain electromagnetic (EM) data collected on a 1 m by 0.2 m grid using the recently introduced Geonics Ltd. EM61 metal detector. All three data sets were collected at an abandoned landfill radioactive Burial Site No. 11 (RB-11) is located on Kirtland Air Force Base near Albuquerque, New Mexico.

More Details

NIR high-efficiency subwavelength diffractive structures in semiconductors

Smith, R.E.; Warren, M.E.; Wendt, J.R.; Vawter, G.A.

We have fabricated sub-wavelength diffractive optical elements with binary phase profiles for operation at 975 nm. Blazed transmission gratings with minimum features 63 nm wide were designed by using rigorous coupled-wave analysis and fabricated by direct-write e-beam lithography and reactive ion beam etching in gallium arsenide. Transmission measurements show 85% diffraction efficiency into the first order. Anti-reflection surfaces, with features 42 nm wide were also designed and fabricated.

More Details

Transport processes investigation: A necessary first step in site scale characterization plans

Roepke, C.

We propose an approach, which we call the Transport Processes Investigation or TPI, to identify and verify site-scale transport processes and their controls. The TPI aids in the formulation of an accurate conceptual model of flow and transport, an essential first step in the development of a cost effective site characterization strategy. The TPI is demonstrated in the highly complex vadose zone of glacial tills that underlie the Fernald Environmental Remediation Project (FEMP) in Fernald, Ohio. As a result of the TPI, we identify and verify the pertinent flow processes and their controls, such as extensive macropore and fracture flow through layered clays, which must be included in an accurate conceptual model of site-scale contaminant transport. We are able to conclude that the classical modeling and sampling methods employed in some site characterization programs will be insufficient to characterize contaminant concentrations or distributions at contaminated or hazardous waste facilities sited in such media.

More Details

Research on robotics by principal investigators of the Robotics Technology Development Program

Harrigan, R.W.

The U.S. Department of Energy`s Office of Technology Development has been developing robotics and automation technologies for the clean-up and handling of hazardous and radioactive waste through one of its major elements, Cross Cutting and Advanced Technology development. CC&AT university research and development programs recognize the strong technology, base resident in the university community and sponsor a focused technology research and development program which stresses close interaction between the university sector and the DOE community. This report contains a compilation of research articles by each of 14 principle investigators supported by CC&AT to develop robotics and automation technologies for the clean-up and handling of hazardous and radioactive waste. This research has led to innovative solutions for waste clean-up problems, and it has moved technology out of university laboratories into functioning systems which has allowed early evaluation by site technologists.

More Details

A Heuristic and complete planner for the classical mover`s problem

Hwang, Yong K.

We present a motion planner for the classical mover`s problem in three dimensions that is both resolution-complete and efficient in that it has performance commensurate with task difficulty. It is based on the SANDROS search strategy, which uses a hierarchical, multi-resolution representation of the configuration space along with a generate-and-test paradigm for solution paths. This planner can control the trade-offs between the computation resource and algorithmic completeness/solution path quality, and thus can fully utilize the available computing power. It is useful for navigation of mobile robots, submarines and spacecraft, or part motion feasibility in assembly planning.

More Details

Percolation model for selective dissolution of multi-component glasses

Brinker, C.J.

A percolation model is developed which accounts for most known features of the process of porous glass membrane preparation by selective dissolution of multi-component glasses. The model is founded within tile framework of the classical percolation theory, wherein the components of a glass are represented by random sites on a suitable lattice. Computer simulation is used to mirror the generation of a porous structure during the dissolution process, reproducing many of the features associated with the phenomenon. Simulation results evaluate the effect of the initial composition of the glass on the kinetics of the leaching process as well as the morphology of the generated porous structure. The percolation model establishes the porous structure as a percolating cluster of unreachable constituents in the glass. The simulation algorithm incorporates removal of both, the accessible leachable components in the glass as well as the independent clusters of unreachable components not attached to the percolating cluster. The dissolution process thus becomes limited by the conventional site percolation thresholds of the unreachable components (which restricts the formation of the porous network), as well as the leachable components (which restricts the accessibility of the solvating medium into the glass). The simulation results delineate the range of compositional variations for successful porous glass preparation and predict the variation of porosity, surface area, dissolution rates and effluent composition with initial composition and time. Results compared well with experimental studies and improved upon similar models attempted in die past.

More Details

Low-voltage cathodoluminescence of europium-activated yttrium orthovanadate

Phillips, Mark L.F.

Emissive flat panel display systems operating in full color demand higher performance at low voltages (ca. 501000 V) from cathodoluminescent (CL) phosphors than cathode ray tubes require. Hydrothermal synthesis has been suggested as a route to phosphors with improved efficiencies, lower voltage thresholds, and increased saturation power. This hypothesis was tested in europium-doped yttrium orthovanadate (YVO{sub 4}:Eu), an efficient, red emitting CL phosphor. The CL efficiency of YVO{sub 4}:Eu crystallized from aqueous solution at 200{degrees}C is relatively low until it is annealed. The distribution of particle sizes in the low-temperature phosphor is similar to that in material made via a solid-state route, but crystallites remain much smaller (ca. 400 {Angstrom}) until they are annealed. These observations, along with the anomalously strong dependence of CL intensity on europium concentration, support a model in which efficiency principally depends on crystallite size. CL efficiency of both solid state and hydrothermal YVO{sub 4}:Eu increases with voltage at constant power. Surface-bound electrons are likely the dominant influence on efficiency at voltages near threshold. Saturation power is independent of synthetic route. It is apparent that the CL properties of hydrothermally synthesized YVO{sub 4}:Eu are essentially the same as those of YVO{sub 4}:Eu produced via conventional, high-temperature routes.

More Details

Adaptive path planning: Algorithm and analysis

Chen, Pang C.

To address the need for a fast path planner, we present a learning algorithm that improves path planning by using past experience to enhance future performance. The algorithm relies on an existing path planner to provide solutions difficult tasks. From these solutions, an evolving sparse work of useful robot configurations is learned to support faster planning. More generally, the algorithm provides a framework in which a slow but effective planner may be improved both cost-wise and capability-wise by a faster but less effective planner coupled with experience. We analyze algorithm by formalizing the concept of improvability and deriving conditions under which a planner can be improved within the framework. The analysis is based on two stochastic models, one pessimistic (on task complexity), the other randomized (on experience utility). Using these models, we derive quantitative bounds to predict the learning behavior. We use these estimation tools to characterize the situations in which the algorithm is useful and to provide bounds on the training time. In particular, we show how to predict the maximum achievable speedup. Additionally, our analysis techniques are elementary and should be useful for studying other types of probabilistic learning as well.

More Details

A natural analogue for high-level waste in tuff: Chemical analysis and modeling of the Valles site

Stockman, Harlan W.

The contact between an obsidian flow and a steep-walled tuff canyon was examined as an analogue for a high-level waste repository. The analogue site is located in the Valles Caldera in New Mexico, where a massive obsidian flow filled a paleocanyon in the Battleship Rock Tuff. The obsidian flow provided a heat source, analogous to waste panels or an igneous intrusion in a repository, and caused evaporation and migration of water. The tuff and obsidian samples were analyzed for major and trace elements and mineralogy by INAA, XRF, x-ray diffraction, and scanning electron microscopy and electron microprobe. Samples were also analyzed for D/H and {sup 39}Ar/{sup 40}Ar isotopic composition. Overall, the effects of the heating event seem to have been slight and limited to the tuff nearest the contact. There is some evidence of devitrification and migration of volatiles in the tuff within 10 m of the contact, but variations in major and trace element chemistry are small and difficult to distinguish from the natural (pre-heating) variability of the rocks.

More Details
Results 97476–97500 of 100,993
Results 97476–97500 of 100,993
Top